Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "specific rate" wg kryterium: Temat


Tytuł:
Bayesian estimation of fertility rates under imperfect age reporting
Autorzy:
Verma, Vivek
Nath, Dilip C.
Dwivedi, S. N.
Powiązania:
https://bibliotekanauki.pl/articles/14761323.pdf
Data publikacji:
2023-03-15
Wydawca:
Główny Urząd Statystyczny
Tematy:
Fisher information
square error loss function
age-specific marital fertility rate
Bayes estimator
maximum likelihood principle
Opis:
This article outlines the application of the Bayesian method of parameter estimation to situations where the probability of age misreporting is high, leading to transfers of an individual from one age group to another. An essential requirement for Bayesian estimation is prior distribution, derived for both perfect and imperfect age reporting. As an alternative to the Bayesian methodology, a classical estimator based on the maximum likelihood principle has also been discussed. Here, the age misreporting probability matrix has been constructed using a performance indicator, which incorporates the relative performance of estimators based on age when reported correctly instead of misreporting. The initial guess of performance indicators can either be empirically or theoretically derived. The method has been illustrated by using data on Empowered Action Group (EAG) states of India from National Family Health Survey-3 (2005-2006) to estimate the total marital fertility rates. The present study reveals through both a simulation and real-life set-up that the Bayesian estimation method has been more promising and reliable in estimating fertility rates, even in situations where age misreporting is higher than in case of classical maximum likelihood estimates.
Źródło:
Statistics in Transition new series; 2023, 24, 2; 39-57
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variability of Odour Emissions from Selected Passive Area Source: Preliminary Analysis for a One-year Study at a Municipal Wastewater Treatment Plant in Poland
Autorzy:
Sobczyński, Piotr
Miller, Urszula
Sówka, Izabela
Powiązania:
https://bibliotekanauki.pl/articles/27315756.pdf
Data publikacji:
2023
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
specific odour emission rate
primary settling tanks
temporal variability
Opis:
Passive area sources, such as primary settling tanks, located in the area of wastewater treatment plants can significantly impact odour air quality. This paper presents the variability of odour emissions from the primary settling tank at the Municipal Wastewater Treatment Plant (MWWTP) during a one-year study of odour concentrations determined by dynamic olfactometry. The investigations indicated that the highest monthly average value of the specified odour emission rate was for July (49.89 ouE/m2/s). Preliminary statistical analysis results using a multiple regression model showed the statistical significance of the independent variables in the form of wastewater temperature and retention time concerning the specific odour emission rate values.
Źródło:
Rocznik Ochrona Środowiska; 2023, 25; 228--234
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Podstawy oceny elektromagnetycznych okoliczności użytkowania nasobnych urządzeń Internetu Rzeczy
Principles of evaluating electromagnetic aspects of using wearable Internet of Things devices
Autorzy:
Zradziński, Patryk
Gryz, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/23352060.pdf
Data publikacji:
2022
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
pole elektromagnetyczne
skutki bezpośrednie narażenia
skutki pośrednie narażenia
współczynnik pochłaniania właściwego energii (SAR)
nauki o zdrowiu
inżynieria biomedyczna
inżynieria środowiska
electromagnetic field
direct effects of exposure
indirect effects of exposure
specific energy absorption rate (SAR)
health sciences
biomedical engineering
environmental engineering
Opis:
Objęcie poruszających się obiektów nadzorem systemu Internetu Rzeczy (IoT, ang. Internet of Things) wymaga zastosowania bezprzewodowej transmisji danych, a często również energii, z wykorzystaniem propagacji energii elektromagnetycznej w powietrzu. Rozwiązania takie są coraz powszechniej wdrażane w wielu gałęziach gospodarki (np. przemyśle wytwórczym, budownictwie, transporcie czy rolnictwie, nauce, służbie zdrowia, a nawet w służbach mundurowych czy działaniach militarnych). Pole elektromagnetyczne (pole-EM) jest w takich systemach emitowane przez moduły radiowe urządzeń wyposażone w anteny nadawcze. Ze względu na elektromagnetyczne okoliczności związane z użytkowaniem urządzeń nasobnych IoT, właściwe jest rozróżnienie ich pod względem rodzaju źródła zasilania modułów radiowych na: (1) autonomiczne urządzenia wyposażone w źródło zasilania modułów radiowych, wykorzystujących różne standardy radiokomunikacji, np. Bluetooth, Wi-Fi, publiczne systemy telefonii komórkowej i podobne oraz (2) urządzenia niezawierające źródła zasilania, zasilane z zewnątrz energią przekazaną bezprzewodowym łączem elektromagnetycznym, np. znaczniki pasywne RFID. Celem publikacji jest scharakteryzowanie okoliczności i skutków oddziaływania w środowisku pracy pola-EM wytwarzanego ze względu na zamierzone właściwości funkcjonalne różnorodnych nasobnych urządzeń wykorzystywanych w systemach IoT. Scharakteryzowano nasobne urządzenia systemów IoT i wykorzystywane w nich różnorodne technologie radiokomunikacyjne, rozpatrywane ze względu na pole-EM emitowane podczas ich użytkowania i skutki jego oddziaływania w środowisku pracy. Omówiono wymagania prawne dotyczące oceny i ograniczania niepożądanych skutków oddziaływania pola-EM na pracujących i materialne środowisko pracy, a także środki ochronne służące ich ograniczaniu, stosowane w ramach wymagań prawa pracy.
Making movable objects a part of the Internet of Things (IoT) system requires the use of wireless transmission of data, and often also energy when harvesting electromagnetic energy in the air. Such solutions are increasingly commonly implemented in many sectors of the economy (e.g. manufacturing industry, construction, transport and agriculture, science, healthcare, and even in the uniformed services or military operations). The electromagnetic field (EMF) in such systems is emitted by radio modules of devices equipped with transmitting antennas. Due to the electromagnetic circumstances related to the use of IoT wearable devices, it is appropriate to distinguish them in terms of the type of power source for radio modules into: (1) autonomous devices equipped with a power source for radio modules, using various radiocommunication standards, e.g. Bluetooth, Wi-Fi, public mobile telecommunication systems, so on; and (2) devices without a power source, powered externally using energy transmitted via a wireless electromagnetic link, e.g. passive RFID tags. The aim of the publication is to characterise the circumstances and effects of EMF exposure in the work environment due to the intended functional properties of various wearable devices used in IoT systems. The wearable IoT systems devices and the various radiocommunication technologies used in them are characterised, considering the EMF emitted during their use, and the effects of this in the work environment. The paper also discusses the legal requirements for assessing and reducing the undesirable effects of EMF exposure on workers and the material objects of work environment, as well as protective measures to limit them, as applied within the requirements of the labour law.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2022, 4 (114); 7--38
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Charakterystyka emisji elektromagnetycznych związanych z użytkowaniem nasobnych urządzeń działających w technologii Internetu Rzeczy
Characteristics of electromagnetic emissions related to the use of wearable devices operating within the Internet of Things technology
Autorzy:
Zradziński, Patryk
Karpowicz, Jolanta
Gryz, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2202814.pdf
Data publikacji:
2021
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
urządzenia łączności bezprzewodowej
inżynieria środowiska
inżynieria biomedyczna
pole elektromagnetyczne
symulacje numeryczne
szybkość pochłaniania właściwego energii
wireless communication devices
environmental engineering
biomedical engineering
electromagnetic field
numerical simulations
specific energy absorption rate
Opis:
Internet Rzeczy (IoT) jest coraz powszechniej wykorzystywaną technologią w przemyśle, w tzw. inteligentnych miastach i domach czy w monitoringu stanu zdrowia. Artykuł prezentuje charakterystykę emisji elektromagnetycznych różnych technologii łączności bezprzewodowej wykorzystywanych w IoT (WiFi, Bluetooth, RFID, Zig-Bee, sieci komórkowe itp.). Przedstawiono w nim również kryteria i metody oceny zawodowych zagrożeń elektromagnetycznych związanych z użytkowaniem takich urządzeń.
The Internet of Things (IoT) is an increasingly popular technology in industry, so-called smart cities and homes, or health monitoring. The article presents the characteristics of electromagnetic emissions of various wireless communication technologies used in IoT (WiFi, Bluetooth, RFID, Zig-Bee, cellular networks, etc.). It also presents criteria and methods for the assessment of occupational electromagnetic hazards related to the use of such devices.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2021, 5; 17-21
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fine dry grinding with cylpebs of quartz sand in the Şile, District of İstanbul, Turkey
Autorzy:
Haner, Serhan
Powiązania:
https://bibliotekanauki.pl/articles/2073881.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
piasek kwarcowy
kruszenie
rozdrabnianie
quartz sand
breakage function
specific rate of breakage
fine comminution
Opis:
Glass and ceramic industries are the main consumption areas of quartz sand, which is a formed as a result of the weathering of igneous metamorphic rocks. In such industries, it is very important to select the correct ball size in order to grind the raw material to the desired particle size in optimum time. In this study, the changes in the specific rate of breakage of the quartz sand sample were investigated by using cylpebs of three different sizes. For this purpose, three different mono-size samples were prepared according to 4√2 series in the range of 0.090-0.053 mm. The quartz sand prepared in these three intervals were ground with 10×10, 20×20 and 30×30 mm cylpebs for different durations. Specific rate of breakage values were obtained from the particle size distributions acquired after various grinding periods. As a result of grinding tests, an increase in rate of breakage is observed due to the increase in cylpebs diameter.
Źródło:
Archives of Mining Sciences; 2021, 66, 4; 625--634
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrasonic specific absorption rate in nanoparticle-mediated moderate hyperthermia
Autorzy:
Gambin, Barbara
Kruglenko, Eleonora
Powiązania:
https://bibliotekanauki.pl/articles/2173578.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasonic hyperthermia
agar-based tissue mimicking phantom
magnetic nanoparticles
temperature
specific absorption rate
SAR
hipertermia ultradźwiękowa
fantom imitujący tkankę na bazie agaru
nanocząstki magnetyczne
temperatura
współczynnik absorpcji właściwej
Opis:
Magnetic nanoparticle’s different applications in nanomedicine, due to their unique physical properties and biocompatibility, were intensively investigated. Recently, Fe₃O₄ nanoparticles, are confirmed to be the best sonosensitizers to enhance the performance of HIFU (high intensity focused ultrasound). They are also used as thermo-sensitizers in magnetic hyperthermia. A new idea of dual, magneto-ultrasound, coupled hyperthermia allows the ultrasound intensity to be reduced from the high to a moderate level. Our goal is to evaluate the enhancement of thermal effects of focused ultrasound of moderate intensity due to the presence of nanoparticles. We combine experimental results with numerical analysis. Experiments are performed on tissue-mimicking materials made of the 5% agar gel and gel samples containing Fe₃O₄ nanoparticles with φ  = 100 nm with two fractions of 0.76 and 1.53% w/w. Thermocouples registered curves of temperature rising during heating by focused ultrasound transducer with acoustic powers of the range from 1 to 4 W. The theoretical model of ultrasound-thermal coupling is solved in COMSOL Multiphysics. We compared the changes between the specific absorption rates (SAR) coefficients determined from the experimental and numerical temperature rise curves depending on the nanoparticle fractions and applied acoustic powers.We confirmed that the significant role of nanoparticles in enhancing the thermal effect is qualitatively similarly estimated, based on experimental and numerical results. So that we demonstrated the usefulness of the FEM linear acoustic model in the planning of efficiency of nanoparticle-mediated moderate hyperthermia.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 3; art. no. e137053
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ultrasonic specific absorption rate in nanoparticle-mediated moderate hyperthermia
Autorzy:
Gambin, Barbara
Kruglenko, Eleonora
Powiązania:
https://bibliotekanauki.pl/articles/2173522.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
ultrasonic hyperthermia
agar-based tissue mimicking phantom
magnetic nanoparticles
temperature
specific absorption rate
SAR
hipertermia ultradźwiękowa
fantom imitujący tkankę na bazie agaru
nanocząstki magnetyczne
temperatura
współczynnik absorpcji właściwej
Opis:
Magnetic nanoparticle’s different applications in nanomedicine, due to their unique physical properties and biocompatibility, were intensively investigated. Recently, Fe₃O₄ nanoparticles, are confirmed to be the best sonosensitizers to enhance the performance of HIFU (high intensity focused ultrasound). They are also used as thermo-sensitizers in magnetic hyperthermia. A new idea of dual, magneto-ultrasound, coupled hyperthermia allows the ultrasound intensity to be reduced from the high to a moderate level. Our goal is to evaluate the enhancement of thermal effects of focused ultrasound of moderate intensity due to the presence of nanoparticles. We combine experimental results with numerical analysis. Experiments are performed on tissue-mimicking materials made of the 5% agar gel and gel samples containing Fe₃O₄ nanoparticles with φ  = 100 nm with two fractions of 0.76 and 1.53% w/w. Thermocouples registered curves of temperature rising during heating by focused ultrasound transducer with acoustic powers of the range from 1 to 4 W. The theoretical model of ultrasound-thermal coupling is solved in COMSOL Multiphysics. We compared the changes between the specific absorption rates (SAR) coefficients determined from the experimental and numerical temperature rise curves depending on the nanoparticle fractions and applied acoustic powers.We confirmed that the significant role of nanoparticles in enhancing the thermal effect is qualitatively similarly estimated, based on experimental and numerical results. So that we demonstrated the usefulness of the FEM linear acoustic model in the planning of efficiency of nanoparticle-mediated moderate hyperthermia.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 3; e137053, 1--18
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of electric current density on specific denitrification rate of and nitrogen removal rate in electrochemical and electrobiological rotating contactor
Wpływ gęstości prądu elektrycznego na właściwą szybkość denitryfikacji i na szybkość usuwania azotu w elektrochemicznym i elektrobiologicznym złożu obrotowym
Autorzy:
Rodziewicz, Joanna
Janczukowicz, Wojciech
Mielcarek, Artur
Bryszewski, Kamil
Powiązania:
https://bibliotekanauki.pl/articles/1845362.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electric current density
rotating electrochemical disk contactor
rotating electrobiological disk contactor
specific denitrification rate
nitrogen removal rate
gęstość prądu elektrycznego
obrotowy elektrochemiczny stycznik dyskowy
obrotowy elektrobiologiczny stycznik dyskowy
określony stopień denitryfikacji
szybkość usuwania azotu
Opis:
This study aimed to determine the influence of the electric current density on the rate of nitrogen compounds removal (rN) and the specific rate of denitrification (rD) in a rotating electrochemical disk contractor (RECDC) and a rotating electro-biological disk contactor (REBDC). In REBDC and RECDC, the cathode consisted of disks with immobilized biomass and disk, from which biofilm was periodically removed, respectively. An aluminum anode was mounted in contactor chambers. The study was conducted using synthetic wastewater with characteristics similar to wastewater from soilless cultivation of tomatoes. The first stage of the study determined rN and rD in the RECDC. The second stage determined rN and rD in the REBDC. Four hydraulic retention times (HRT) were tested: 4 h, 8 h, 12 h, and 24 h, with electric current densities of 0.63 A/m2, 1.25 A/m2, 2.50 A/m2, 5.00 A/m2, and 10.00 A/m2. In RECDC, a linear dependency was observed between rN and current density in the examined HRTs, whereas in REBDC, a logarithmic dependency was confirmed between rN and current density. In both contactors, an exponential dependency was observed between rD and current density. The specific rate of denitrification decreased when the current density and HRT were increased. The study showed that, in both contactors, the rate of total nitrogen removal increased when the current density was increased and the HRT was decreased.
Celem pracy było określenie wpływu gęstości prądu na szybkość usuwania związków azotu (rN) i na specyficzną szybkość procesu denitryfikacji (rD) w elektrochemicznym tarczowym złożu obrotowym (RECDC) i elektrobiologicznym tarczowym złożu obrotowym (REBDC). W elektrochemicznym tarczowym złożu obrotowym (RECDC) i elektrobiologicznym tarczowym złożu obrotowym (REBDC) katodę stanowiły odpowiednio tarcze pokryte błoną biologiczną i tarcze z których okresowo usuwano błonę biologiczną. Aluminowa anoda była umieszczona w zbiornikach złoża. Badania przeprowadzono na ściekach o wskaźnikach fizykochemicznych podobnych do ścieków z bezglebowej uprawy pomidorów. W pierwszym etapie badań określono wartości rN and rD w RECDC podczas gdy w drugim w REBDC. Zastosowano cztery wartości hydraulicznego czasu zatrzymania (HRT): 4 h, 8 h, 12 h and 24 h dla następujących gęstości prądu: 0.63 A/m2, 1.25 A/m2, 2.50 A/m2, 5.00 A/m2 and 10.00 A/m2. W elektrochemicznym złożu zaobserwowano liniową zależność pomiędzy rN i gęstością prądu, podczas gdy w złożu elektrobiologicznym zależność logarytmiczną. Dla obu złóż stwierdzono wykładniczą zależność pomiędzy rD i gęstością prądu. Specyficzną szybkość procesu denitryfikacji malała wraz ze wzrostem gęstości prądu i HRT. Badania pokazały, że w obu złożach, elektrochemicznym i elektrobiologicznym szybkość usuwania związków azotu obniżała się wraz ze wzrostem gęstości prądu i obniżaniem HRT.
Źródło:
Archives of Environmental Protection; 2020, 46, 4; 23-32
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Increasing the specific rate of continuous phase modulation signals
Zwiększenie prędkości właściwej sygnałów o modulacji częstotliwościowej z ciągłą fazą
Autorzy:
Banket, Victor
Manakov, Sergei
Powiązania:
https://bibliotekanauki.pl/articles/407692.pdf
Data publikacji:
2019
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
continuous-phase modulation
specific rate
Walsh-Barker composite sequence
performance indicators of a transmission system
modulacja częstotliwościowa z ciągłą fazą
prędkość właściwa
sekwencja złożona Walsha-Barkera
wskaźnik wydajności systemu przesyłowego
Opis:
A method has been developed for increasing the specific rate of frequency modulation signals with a continuous phase based on the use of the properties of composite Walsh-Barker sequences. The proposed method is applicable for multi-position signals. Simultaneously, the tasks of synchronization and registration of processing results are solved. The increase in the efficiency of digital signal transmission systems is theoretically justified.
Opracowano i zbadano eksperymentalnie metodę zwiększania prędkości właściwej sygnałów modulacji częstotliwościowej z ciągłą fazą opartą na wykorzystaniu właściwości sekwencji złożonych Walsha-Barkera. Zaproponowana metoda może być zastosowana do sygnałów wielopozycyjnych. Jednocześnie rozwiązywane są zadania synchronizacji i rejestracji wyników przetwarzania. Wzrost wskaźników wydajności systemów cyfrowego przesyłania sygnałów jest teoretycznie uzasadniony.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2019, 9, 1; 57-60
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Empirical Analysis of Factors Affecting Bank Interest Margins: Evidence from the South East European Countries
Analiza empiryczna czynników wpływających na wysokość bankowej marży odestkowej: dane z krajów Europy Południowo‑Wschodniej
Autorzy:
Ganić, Mehmed
Powiązania:
https://bibliotekanauki.pl/articles/633265.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
determinanty bankowe
determinanty makroekonomiczne
rozpiętość marży odsetkowej
region Europy Południowo‑Wschodniej (SEE)
bank‑specific determinants
macroeconomic determinants
Interest rate spread
SEE region
Opis:
Niniejszy artykuł przedstawia analizę empiryczną czynników wpływających na wysokość bankowej marży odsetkowej w ośmiu krajach Europy Południowo‑Wschodniej (SEE) w latach 2000–2014. Celem artykułu jest zbadanie głównych przyczyn zmian marży odsetkowej w wybranych krajach wymienionego regionu. Ponadto, w opracowaniu zbadano relację pomiędzy zmienną zależną – rozpiętością stóp procentowych (IRS – jako zmienna zastępcza analizy zmian rozpiętości marży odsetkowej) oraz zbiorem wybranych szczegółowych zmiennych w krajach Europy Południowo‑Wschodniej z zastosowaniem metody przewidywania danych panelowych. Badanie to jest wykonane na podstawie zbiorczych danych dla całego sektora bankowego w wymienionych krajach. Zgodnie z założeniami, rezultat badań wskazał znaczenie ryzyka kredytowego, koncentracji banków, efektywności operatywnej i prognoz inflacji w wyznaczaniu wysokości marży odsetkowej. Co istotne, w przeciwieństwie do większości dotychczasowych badań empirycznych, stwierdzono odwrotną zależność pomiędzy zmienną koncentracji banków i wysokością marży odsetkowej, podobnie jak w przypadku efektywności operatywnej. Ponadto, w opisanym badaniu nie znaleziono statystycznie wystarczalnych dowodów iż marża odsetkowa jest determinowana przez wzrost gospodarczy, rentowność banku (mierzoną przez ROA) oraz ryzyko płynności.
This paper provides an empirical analysis of factors affecting Bank Interest Margins in eight countries of the South‑East European (SEE) region between 2000 and 2014. The purpose of this paper is to examine and investigate the main drivers of Bank Interest Rate Margins across selected countries throughout the SEE region. Also, the study explored the relationship between the dependent variable Interest Rate Spread (IRS – as a proxy variable for measuring variation in Bank Interest Rate Margins) and a set of selected banks’ specific variables in SEE by employing panel data estimation methodology. This research is based on aggregate data for the whole banking sector of each country. In line with some expectations, our findings confirm the importance of credit risk, bank concentration operative efficiency, and inflation expectations in determining Bank Interest Rate Margins. Interestingly, in contrast to the majority of recent empirical research, the study found an inverse relationship between the bank concentration variable and Bank Interest Rate Margins as well as between the operational efficiency variable and Bank Interest Rate Margins. Also, the study could not find statistically significant evidence that Bank Interest Rate Margins are determined by output growth, bank profitability (measured by ROA) or liquidity risk.
Źródło:
Comparative Economic Research. Central and Eastern Europe; 2018, 21, 2; 81-98
1508-2008
2082-6737
Pojawia się w:
Comparative Economic Research. Central and Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Effect of Probiotic Addition in Commercial Feed to Growth and Survival Rate of Sangkuriang Catfishes (Clarias gariepinus (Burchell, 1822))
Autorzy:
Lili, Walim
Hartanto, Rezky
Kurniawati, Nia
Herawati, Titin
Bangkit, B. S. Ibnu
Powiązania:
https://bibliotekanauki.pl/articles/1109212.pdf
Data publikacji:
2018
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Clarias gariepinus
Sangkuriang catfish
feed conversion ratio
probiotic
specific growth rate
survival rate
Opis:
This study was conducted to determine the effect of probiotic addition in commercial feed to the growth and survival rate of Sangkuriang catfish (Clarias gariepinus). This research was conducted at the Ciparanje Experimental Pond Laboratory, Faculty of Fisheries and Marine Sciences, Universitas Padjadjaran, Jatinangor, West Java. The method in used this research was Completely Randomized Design with four treatments and four replications. The treatment was the variances of probiotic addition which consisted of control (without probiotics), probiotic addition at as much as 0.5 grams / kg of feed, 1 gram / kg of feed and 1.5 grams / kg of feed. The parameters observed were specific growth rate (SGR), absolute biomass, survival rate (SR) and feed conversion ratio (FCR). Data were analyzed using Variant Analysis, at 95% confidence level, and continued with Duncan's Multiple Range Test. The results showed that the increase in the daily growth rate of Sangkuriang catfish was straight-line with the addition of probiotics. Furthermore, commercial probiotics with a dose of 1 gram / kg of feed resulted in specific growth rate of 4.22%, absolute weight of 11 grams, survival rate (SR) of 97.5% and FCR of 0.89.
Źródło:
World News of Natural Sciences; 2018, 21; 130-140
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Measurement of the intensity of the electric field of the radio wave emitted by selected mobile phones
Pomiar natężenia składowej elektrycznej pola elektromagnetycznego sygnału fal radiowych emitowanych przez wybrane telefony komórkowe
Autorzy:
Malicka, M.
Malicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/129539.pdf
Data publikacji:
2017
Wydawca:
Politechnika Rzeszowska im. Ignacego Łukasiewicza. Oficyna Wydawnicza
Tematy:
electromagnetic fields
mobile telephony
base station
Specific Absorbtion Rate (SAR)
pole magnetyczne
telefonia komórkowa
stacje bazowe
SAR
Opis:
We are constantly watching the growth of mobile phone users around the world. This causes interest in the issue of the influence of electromagnetic radiation on the human body. The sources of electromagnetic fields are among others mobile telephony. Mobile telephony consists of two basic elements: telephones (terminals) and base stations. Specific Absorption Rate (SAR) means the unit of amount of radiofrequency energy absorbed by the human body when using a mobile phone. The aim of the study was to measure the intensity of the electric field of the radio wave emitted by selected mobile phones. The measurements were carried out in the Radiation Measurement Laboratory at the Provincial Sanitary-Epidemiological Station in Rzeszów. Measurements were made for devices operating in different data transmission systems operating in certain frequency bands. The electric field of the electromagnetic field was measured using an wide field electromagnetic field measuring device type NBM-550 No. B-0240 with EF-1891 type probe. Measurements were made for devices with switched on and off data transmission at the time of receipt and during signaling. In the following sections describe mobile telephony and the basic characteristics of the mobile phone technology. The last part presents the way of making measurements and presentation of results.
Obecnie stale obserwuje się wzrost liczby użytkowników telefonów komórkowych na całym świecie. Powoduje to zainteresowanie zagadnieniem wpływu promieniowania elektromagnetycznego na organizm ludzki. Źródłem pola elektromagnetycznego jest m.in. telefonia komórkowa, która składa się z dwóch podstawowych elementów: telefonów (terminali) i stacji bazowych. Współczynnik absorpcji swoistej (SAR) oznacza jednostkę energii o częstotliwości radiowej zaabsorbowanej przez ludzkie ciało podczas korzystania z telefonu komórkowego. Celem pracy było zmierzenie natężenia pola elektrycznego sygnału fal radiowych emitowanych przez wybrane telefony komórkowe. Pomiary przeprowadzono w Laboratorium Pomiarów Promieniowania w Wojewódzkiej Stacji Sanitarno-Epidemiologicznej w Rzeszowie. Pomiary przeprowadzono dla urządzeń pracujących w różnych systemach transmisji danych, działających w określonych pasmach częstotliwości. Pomiary wykonano za pomocą wywzorcowanego, uniwersalnego, szerokopasmowego miernika natężenia pola elektromagnetycznego typu NBM-550 nr B-0240 z sondą pomiarową typu EF-1891. Wskazania urządzeń sprawdzano dla włączonej i wyłączonej transmisji danych podczas odebrania i w trakcie łączenia sygnału. Opisano telefonię komórkową i podstawowe cechy tej technologii. W ostatniej części artykułu przedstawiono sposób wykonania pomiarów i wyniki.
Źródło:
Physics for Economy; 2017, 1, 1; 21-33
2544-7742
2544-7750
Pojawia się w:
Physics for Economy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The quality of mortality data
Jakość danych o umieralności
Autorzy:
Majewska, Justyna
Powiązania:
https://bibliotekanauki.pl/articles/587012.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Ekonomiczny w Katowicach
Tematy:
Age-specific death rate
Crude death rate
Dimensions of quality
Mortality rate
Surowy współczynnik umieralności
Współczynnik zgonów
Współczynnik zgonów według wieku
Wymiary jakości
Opis:
Measuring mortality is one of the most challenging tasks faced by demographers and epidemiologists. Collecting vital statistics on death and cause-of-death from different sources (e.g. civil registration systems, health care facilities) requires high quality of data to generate critical information to guide public health decision-making. In the first part of the study, selected quality criteria around 5 European Statistical System quality dimensions is discussed, while in the second part, the discussion is focused on three particular aspects of data quality, i.e. the completeness of the data, the age pattern of reported deaths, the plausibility of cause-of-death data.
Pomiar umieralności jest jednym z najtrudniejszych zadań, z którymi mierzą się demografowie i epidemiolodzy. Dane o zgonach i przyczynach zgonów pochodzą z różnych źródeł, co wpływa na konieczność zapewnienia dobrej jakości tych danych, by informacje z nich pozyskiwane mogły być dalej wykorzystane w procesach decyzyjnych chociażby w obrębie opieki medycznej. W pierwszej części pracy omówiono 5 kryteriów Europejskiego Systemu Statystycznego, natomiast w drugiej – 3 aspekty jakości danych, tj. kompletność danych, struktura danych o zgonach ze względu na wiek oraz wiarygodność danych o przyczynach zgonów.
Źródło:
Studia Ekonomiczne; 2017, 344; 76-96
2083-8611
Pojawia się w:
Studia Ekonomiczne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dry Sliding Wear Behavior of Super Duplex Stainless Steel AISI 2507: A Statistical Approach
Autorzy:
Davanageri, M.
Narendranath, S.
Kadoli, R.
Powiązania:
https://bibliotekanauki.pl/articles/379496.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
duplex stainless steel
specific wear rate
Taguchi method
response surface methodology
desirability function approach
stal nierdzewna duplex
stopień zużycia
metoda Taguchi
metoda powierzchni odpowiedzi
Opis:
The dry sliding wear behavior of heat-treated super duplex stainless steel AISI 2507 was examined by taking pin-on-disc type of wear-test rig. Independent parameters, namely applied load, sliding distance, and sliding speed, influence mainly the wear rate of super duplex stainless steel. The said material was heat treated to a temperature of 850°C for 1 hour followed by water quenching. The heat treatment was carried out to precipitate the secondary sigma phase formation. Experiments were conducted to study the influence of independent parameters set at three factor levels using the L27 orthogonal array of the Taguchi experimental design on the wear rate. Statistical significance of both individual and combined factor effects was determined for specific wear rate. Surface plots were drawn to explain the behavior of independent variables on the measured wear rate. Statistically, the models were validated using the analysis of variance test. Multiple non-linear regression equations were derived for wear rate expressed as non-linear functions of independent variables. Further, the prediction accuracy of the developed regression equation was tested with the actual experiments. The independent parameters responsible for the desired minimum wear rate were determined by using the desirability function approach. The worn-out surface characteristics obtained for the minimum wear rate was examined using the scanning electron microscope. The desired smooth surface was obtained for the determined optimal condition by desirability function approach.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 47-56
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Uwarunkowania wykorzystania numerycznych modeli pracowników do oceny zagrożeń bezpośrednich wynikających z narażenia na pole elektromagnetyczne
Conditions of using numerical workers’ models while assessing direct hazards related to exposure to electromagnetic field
Autorzy:
Zradziński, P.
Powiązania:
https://bibliotekanauki.pl/articles/138564.pdf
Data publikacji:
2016
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
symulacje numeryczne
natężenie indukowanego pola elektrycznego
szybkość pochłaniania właściwego energii
dyrektywa 2013/35/UE
numerical simulations
internal electric field strength
specific energy absorption rate
directive 2013/35/EU
Opis:
W niniejszej publikacji przedstawiono możliwości wykorzystania numerycznych modeli ciała pracowników do oceny narażenia na pole elektromagnetyczne, zgodnie z wymaganiami zawartymi w dyrektywie 2013/35/UE i prawie pracy, które zapewniły jej wdrożenie w Polsce. Zaprezentowano wymagania dotyczące oceny biofizycznych skutków oddziaływania pola elektromagnetycznego na organizm człowieka (natężenie indukowanego pola elektrycznego, szybkość pochłaniania właściwego energii), kwalifikowanych w dyrektywie jako zagrożenia bezpośrednie. Na podstawie tych miar, określanych na drodze symulacji numerycznych, może być przeprowadzana analiza zgodności z limitami określonymi w dyrektywie. Przeprowadzenie symulacji numerycznych wymaga dobrej znajomości między innymi zagadnień falowych i specyfiki metod obliczeniowych, a ponadto parametrów analizowanego scenariusza narażenia pracownika w miejscu pracy. Są to jednak procesy kosztowne i czasochłonne, wykonywane jedynie przez wyspecjalizowane ośrodki naukowo-badawcze i z tych powodów zwykle nie dotyczą indywidualnych stanowisk pracy. W ocenie bezpośrednich zagrożeń wynikających z narażenia na pole elektromagnetyczne, w której wykorzystuje się symulacje numeryczne, konieczne jest użycie numerycznego modelu ciała pracownika. W opracowaniu scharakteryzowano zróżnicowanie wartości miar bezpośrednich skutków oddziaływania pola elektromagnetycznego w zależności od poszczególnych parametrów tych modeli, jak: parametry dielektryczne tkanek, pozycja ciała, warunki izolacji od podłoża, rozdzielczość przestrzenna modelu czy jego cechy antropometryczne. Największy wpływ na ocenę zagrożeń mają: warunki izolacji od podłoża, pozycja ciała i cechy antropometryczne (w badaniach zaobserwowano ponad 2-krotne różnice w obliczonych wartościach miar bezpośrednich skutków oddziaływania). Wykazano, że stosowanie do oceny miar bezpośrednich skutków narażenia pracowników na pole elektromagnetyczne, zgodnie z wymaganiami zawartymi w dyrektywie 2013/35/UE, jest ograniczone ze względu na parametry wielu wykorzystywanych dotychczas w badaniach naukowych numerycznych modeli ciała, jak: ograniczona (często szczątkowa) powierzchnia kontaktu z podłożem, zbyt mała rozdzielczość przestrzenna czy nierealistyczna pozycja ciała (wyprostowana z opuszczonymi kończynami górnymi). Istotne jest zatem prowadzenie dalszych badań w kierunku opracowania lepszych modeli numerycznych, a także działań zmierzających do uszczegółowienia i ujednolicenia wymagań odnośnie do modeli numerycznych stosowanych w ocenie omawianych skutków oddziaływania pola na pracowników. Natomiast z powodzeniem modele te mogą być wykorzystywane podczas analiz zależności poziomu zagrożeń elektromagnetycznych od warunków wykonywania pracy (np. od pozycji ciała czy odległości od źródła pola) lub parametrów źródła pola (np.: geometrii, częstotliwości, mocy emitowanego pola), wykorzystywanych w procesie tworzenia: zaleceń, norm lub wymagań prawnych odnoszących się do bezpieczeństwa pracowników w otoczeniu źródeł pola elektromagnetycznego.
This article discusses the possibility of using numerical workers’ body models when assessing exposure to electromagnetic fields in testing compliance with the requirements of Directive 2013/35/EU. The requirements related to assessing the biophysical effects of exposure to electromagnetic fields (internal electric field strength; specific energy absorption rate), qualified by the directive as direct hazards, were presented. A compliance analysis with the limits set out in the directive can be carried out on the basis of the values of these numerically calculated measures. Numerical simulation requires a good knowledge about electromagnetic theory, applied numerical method and the parameters of the analysed exposure scenario in the workplace. It is also an expensive, time-consuming process and can only be carried out by specialised research centres, usually not related to individual worksites. A key issue of numerical simulations used in assessments of direct hazards related to exposure to electromagnetic fields is the numerical human body model. This article discusses variability in the values of effects measures from particular parameters of the models, such as: the dielectric properties of body tissues, posture, insulating conditions, spatial resolution or anthropometric properties. Of these parameters, insulating conditions, posture and anthropometric properties had the greatest impact (more than 2-fold differences between the values of direct effects measures were observed). It was demonstrated that the parameters of most of the numerical human body models used so far as: limited (usually residual) surface with contact to the ground, to coarse spatial resolution, unrealistic posture (straight with lowered upper limbs), result in their use in assessing the direct effect in testing compliance with the requirements of Directive 2013/35/EU is limited. It is important to carry out research focused on the development of numerical human body models without such disadvantages, and also activities to specify in detail and to standardise requirements related to numerical models used when assessing the discussed effects. However, the models can be successfully used in relation analysis between hazards levels and working conditions (posture, distance from field source, etc.) or parameters of field source (geometry, frequency, emitted power, etc.) It is used in process of developing guidelines, standards or legal requirements related to workers’ safety in the vicinity of electromagnetic field sources.
Źródło:
Podstawy i Metody Oceny Środowiska Pracy; 2016, 4 (90); 75-89
1231-868X
Pojawia się w:
Podstawy i Metody Oceny Środowiska Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies