Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "silnik trakcyjny" wg kryterium: Temat


Tytuł:
Zagadnienia strat mocy trakcyjnych silników prądu stałego przy obliczeniach energooszczędnych jazd pojazdów tramwajowych
Problems of power losses of traction direct current motors at calculations of energy saving traffic of tram vehicles
Autorzy:
Rawicki, S.
Powiązania:
https://bibliotekanauki.pl/articles/2076325.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
tramwaj
silnik trakcyjny
silnik prądu stałego
straty mocy
energooszczędność
Opis:
The suitable control of the tram vehicle at various disturbances of the city traffic can ensure the electric energy savings equal to even 30 %. The author of this work continues with elaboration of computer software making possible realization of the tram vehicle run according to the criterion of the minimum energy use. In literature, the problem of the energy saving ride was solved for the tram vehicle only at the assumption that the running of the tram is realized without the traffic disturbances, for the separated, straight and horizontal tracks. Computer software for these idealized run conditions couldn't applied in real routs and literature methods weren't introduced to the energy saving control of tram vehicles. Within the original methodics of the author, the following new phenomena are taken into consideration: an influence of traffic disturbances, changes of motion resistances, interaction of different vehicles. In the typical, dynamical ride of a tram, great changes of values of motor losses occur within resistance, iron and mechanical losses. This effect has been here analysed and taken into account for algorithm of an energy saving traffic of a tram.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2006, 75; 89-94
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wybrane zagadnienia stabilności trakcyjnych układów napędowych sterowanych impulsowo
Selected problems of stability of pulse-mode controlled traction drive systems
Autorzy:
Kosiorowski, S.
Stobiecki, A.
Żuchowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/2076317.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik trakcyjny
sterowanie napędem
lokomotywa
układ napędowy
Opis:
New controllable power semiconductor devices make the high frequency pulse-mode operation of the power electronic converters in traction drive systems possible. The capacity and inductance of the converter input filter limiting the ripple of the traction network voltage and current can be decreased for this reason. However, the significant change of the parameter values of these elements can be unacceptable due to necessity to ensure the stable operation of the pulse-mode control system. Results of analytical research, computer-aided simulation and laboratory research concerning stability of the pulse-mode controlled drive system with the electric mining locomotive's traction motor are presented in this paper. On the basis of the traction system simplified model consisting of the energy source, traction network, input filter and drive system, the analysis of system operation was carried out. The non-linear differential equations describing the system were formulated and the points of balance were calculated. The relationships concerning the minimum value of the filter capacity ensuring proper work of the system were obtained on the basis of stability conditions. The waveforms of voltages in the system in stable and unstable working conditions obtained as result of computer simulation using Maple program are shown in the paper. Selected results of laboratory tests of the stability of the traction drive system equipped with the current and speed controllers are also shown here. The specific attention was paid to the influence of the filter capacitor capacity, line resistance and load current on the filter capacitor voltage fluctuations.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2006, 75; 77-82
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ stopnia wzbudzenia silnika trakcyjnego na parametry użytkowe lokomotywy kopalnianej i składu pociągu
The impact of traction motor excitation upon performance parameters of a coal mine locomotive and train
Autorzy:
Dzikowski, A.
Hefczyc, M.
Powiązania:
https://bibliotekanauki.pl/articles/186427.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technik Innowacyjnych EMAG
Tematy:
silnik trakcyjny
lokomotywa kopalniana
parametry
traction motor
mine locomotive
parameters
Opis:
Artykuł prezentuje wpływ zmiany stopnia wzbudzenia napędowego silnika szeregowego prądu stałego na uzyskiwane przez lokomotywę kopalnianą i skład pociągu parametry trakcyjne. Zmiana stopnia wzbudzenia silnika szeregowego prądu stałego powoduje zmianę ukształtowania momentu napędowego silnika względem uzyskiwanej prędkości obrotowej i prądu silnika. Ma to decydujący wpływ na uzyskiwaną wartość przyśpieszenia oraz prędkość maksymalną lokomotywy i całego składu pociągu. Zmiany charakterystyki prędkości obrotowej i momentu silnika trakcyjnego na skutek zmian stopnia wzbudzenia pozwalają na dobór parametrów trakcyjnych lokomotywy i składu pociągu. Przedstawiona w artykule analiza wyników symulacji komputerowych pozwala na wyciągnięcie wniosków dotyczących optymalnego doboru stopnia wzbudzenia silnika szeregowego prądu stałego w zależności od oczekiwanych parametrów trakcyjnych stawianych lokomotywie i składowi pociągu w trudnych warunkach kopalnianych.
The article presents the impact of the change of drive excitation of DC series motor upon traction parameters obtained by a coal mine locomotive and train. The change in level of DC series motor excitation causes a change in the way thrust torque is shaped against engine rotational speed and current of the engine. It is of crucial importance upon received acceleration value and maximum speed of the locomotive and the entire train. Changes in engine speed and the torque of traction motor characteristics resulting from the changes in the level of excitation allow the choice traction parameters of locomotive and train. The analysis of computer simulation results presented in the article allows drawing conclusions regarding optimal choice of the level of DC series motor excitation depending on expected traction parameters of the locomotive and train in difficult coal mine environment.
Źródło:
Mechanizacja i Automatyzacja Górnictwa; 2014, R. 52, nr 4, 4; 14-24
0208-7448
Pojawia się w:
Mechanizacja i Automatyzacja Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wentylatory stosowane w tramwajowych zespołach wentylacyjnych
Fan for tramways
Autorzy:
Kędzierzawski, J.
Kaczyński, R.
Powiązania:
https://bibliotekanauki.pl/articles/252011.pdf
Data publikacji:
2003
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
Instytut Techniki Cieplnej
konstrukcja wentylatora
silnik trakcyjny
wentylator KONSTAL
wentylator tramwajowy
wentylator WP-30/71
Zakład Produkcji Doświadczalnej ITC
Opis:
W artykule przedstawiono historię rozwoju konstrukcji wentylatorów, stosowanych w tramwajowych zespołach wentylacyjnych, przeznaczonych do chłodzenia rozrusznika i silników trakcyjnych, opracowanych w Instytucie Techniki Cieplnej, a produkowanych przez fabryki wentylatorów oraz Zakład Produkcji Doświadczalnej ITC.
Źródło:
TTS Technika Transportu Szynowego; 2003, 10, 9; 60-67
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wariantowe rozwiązania silników napędu głównego tramwaju
Alternative solution of traction engines in tramways
Autorzy:
Glinka, T.
Kulesz, B.
Powiązania:
https://bibliotekanauki.pl/articles/252019.pdf
Data publikacji:
2003
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
maszyna elektryczna
pojazd szynowy
silnik napędowy tramwaju
silnik trakcyjny
tramwaj typu 105Na
Opis:
Moc znamionowa ciągła (S1) silników napędowych tramwaju typu 105Na wynosi 4x40 kW. Napęd ten stanowią cztery silniki szeregowe prądu stałego LTa-220 bądź LTb-220, różniące się jedynie liczbą zwojów uzwojenia wzbudzenia. W silniku LTb-220 jest o 40% więcej zwojów uzwojenia wzbudzenia przy proporcjonalnie mniejszym przekroju przewodów. Wykonania fabryczne tramwaju typu 105Na mają zarówno rozruch,jak i hamowanie rezystancyjne.
Źródło:
TTS Technika Transportu Szynowego; 2003, 10, 7-8; 70-73
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Unifikacja silników trakcyjnych
Standardizing the traction motor
Autorzy:
Ratajski, D.
Tadeusiak, K.
Powiązania:
https://bibliotekanauki.pl/articles/1372405.pdf
Data publikacji:
2011
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
silnik trakcyjny
silnik elektryczny
pojazd szynowy
Opis:
Trains are frequently custom made to accommodate the individual technical specifications of different rail service providers. Each new design requires a variety of unique, train specific components that are supplied by additional independent original equipment manufacturers (OEMs). Traditionally the traction motor is among the many custom made components required by train manufacturers. These motors are intensively engineered to ensure function and quality, which results in increased complexity throughout the value chain and adversely affects their manufacturing lead time. To overcome these problems, ABB has developed a new range of induction traction motors with built-in flexibility so that customer-specific requirements can be met using a single modular design.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2011, 2, 90; 95-98
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Revised Method for Calculating of The Optimal Train Control Mode
Autorzy:
Zhelieznov, Konstantun I.
Akulov, Artem S.
Zabolotniy, Oleksandr M.
Ursulyak, Lyudmila V.
Chabanuk, Evgenij V.
Shvets, Angela O.
Kuznetsov, Valeriy G.
Radkevych, Anatolii V.
Powiązania:
https://bibliotekanauki.pl/articles/224041.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
conducting a train
running profile of the train
optimal control
driving simulators
electric traction motors
prowadzenia pociągu
profil jazdy pociągu
optymalna kontrola
symulator jazdy
silnik trakcyjny
Opis:
Development of a method for calculating the optimal mode of conducting a train in terms of energy saving meet the safety requirements and schedules. The method of calculation must solve the assigned tasks without significant time spent on the calculation. To implement this method of calculation was used a simplified model of the train as a controlled system. The existing mathematical and algorithmic methods for solving isoperimetric problems of finding the optimal solution in the presence of restrictions on resources were the information base for methodology development. Scientific works of domestic and foreign scientists, professional periodicals, materials of scientific and practical conferences, methodical and normative materials, currently in force on Ukrainian Railways. The results of these studies were used to create simulators on the basis of computer technology for the training of locomotive drivers. The scientific novelty of the proposed calculation method consists in applying the simplified calculations of the status of the train as a controlled system, without the use of differential equations of motion that allows to significantly increase the speed of the calculations. This, in turn, will solve the problems of finding optimal control in real time, taking into account changing conditions during the movement of the train. The practical significance of the obtained results is the use of such a calculation method that does not require significant time for its implementation and can be used as a subsystem of the on-board train control system capable of performing calculations taking into account changes in the current train situation.
Źródło:
Archives of Transport; 2019, 51, 3; 7-19
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sterowanie prądem wzbudzenia silników trakcyjnych lokomotyw kopalnianych
Control of the field current of the mine locomotives traction motors
Autorzy:
Dudek, R.
Kosiorowski, S.
Stobiecki, A.
Żuchowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/2076371.pdf
Data publikacji:
2007
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
sterowanie prądem
pole magnetyczne
silnik trakcyjny
lokomotywa kopalniana
Opis:
In the majority of electric trolley locomotives operated in Polish mines, a significant (3:1) main poles' field weakening in the traction machines is necessary. In the paper, special attention was paid to an analysis and results of laboratory tests of a transistor-based system designed for a pulse-mode control of the traction motors' excitation current of the locomotive type Ld31 (90 kW). A capacitor connected in parallel to the excitation winding of the traction motor is discharged through an resistor in the described system. Consequences of the significant differences in the current overload capacity of power transistors and SCR thyristors were presented. The relationships between a field weakening rate and an armature current for different switch duty ratios of the transistor were obtained on the basis of an approximate analysis of the system operation. The steady-state characteristic curves of the excitation current versus the armature current and power losses in the resistor were found using Maple computer algebra system. Results of the laboratory tests concerning the relationship between the excitation current and the armature current and selected oscillograms of the voltage and current waveforms were also shown.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2007, 77; 65-70
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stany przejściowe w filtrach wejściowych napędów trakcyjnych sterowanych impulsowo przy pracy silnikowej i prądnicowej
Transient states in input filters of pulse-mode controlled traction drives in motoring and generating mode of operation
Autorzy:
Dudek, R.
Kosiorowski, S.
Stobiecki, A.
Powiązania:
https://bibliotekanauki.pl/articles/1374145.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
napęd trakcyjny
silnik trakcyjny
filtr wejściowy
Opis:
Analysis of stable operation conditions of the input filters of the mine locomotives' drive systems was presented in the paper. Equations describing the drive system in various operation states were formulated on the basis of a simplified model of the traction system. The points of balance were obtained and linearization of the system was carried out using the power series method and Jacobi matrix. Conditions of stable operation concerning the minimum value of the input filter capacitance depending on the parameters of the supply source and traction network and also on the characteristics and operation states of the drive were given. Special attention was paid to the analysis of the stable operation conditions in the generating mode during braking. Selected results of simulation and laboratory tests concerning the stable operation conditions of the input filter of the drive system of the pulse-mode controlled mine locomotive were presented. Laboratory tests were carried out using a laboratory stand equipped with a 45 kW traction motor of the mine locomotive type Ld 31.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2008, 80; 113-118
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sposoby zmniejszenia emisji zanieczyszczeń w towarowym transporcie kolejowym
Ways of reducing the pollutant emissions in freight railway transport
Autorzy:
Merkisz-Guranowska, Agnieszka
Pielecha, Ireneusz
Gallas, Dawid
Andrzejewski, Maciej
Daszkiewicz, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/34603763.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
Tematy:
emisja zanieczyszczeń
redukcja
towarowy transport kolejowy
spalinowy pojazd trakcyjny
silnik spalinowy
emissions
reduction
freight railway transport
combustion traction vehicle
combustion engine
Opis:
Silniki spalinowe o zapłonie samoczynnym pojazdów szynowych, ze względu na zalety jakimi dysponują, nadal pozostają głównym źródłem napędu tego typu pojazdów. Szkodliwe oddziaływanie na środowisko naturalne tych silników jest jednak znaczące. W Polsce jest eksploatowanych wiele rodzajów spalinowych pojazdów trakcyjnych, których silniki często nie spełniają wymagań limitów toksyczności spalin. W artykule przedstawiono aktualnie stosowane systemy i układy pozwalające na zmniejszenie negatywnego oddziaływania spalinowych pojazdów trakcyjnych na otoczenie.
Combustion engines with self-ignition of rail vehicles, due to the good points that they have, still remain the main source of drive of such type vehicles. However, the harmful effect on natural environment of these engines is significant. In Poland many types of combustion traction vehicles, whose engines often do not meet the requirements of limits for toxicity of exhaust gas, are operated. The article presents the currently used systems and assemblies allowing to reduce the negative impact of combustion traction vehicles on the environment.
Źródło:
Rail Vehicles/Pojazdy Szynowe; 2015, 4; 11-17
0138-0370
2719-9630
Pojawia się w:
Rail Vehicles/Pojazdy Szynowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Silniki trakcyjne z magnesami trwałymi – nowa jakość napędów elektrycznych
Permanent magnets motors - a new solution for electrical drives
Autorzy:
Bernatt, J.
Powiązania:
https://bibliotekanauki.pl/articles/1374758.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
napęd elektryczny
silnik trakcyjny
magnes trwały
Opis:
The paper deals with permanent magnets motors for traction application. In past years, in locomotives designed for mining applications DC motors of output 25/45 kW were used. Since 1990 such motors have not been manufactured, so the old motors have to be replaced by new ones. Due to usage of PM, designers increased the output of the motors to 33/60 kW. The motors were designed as motors with magnets mounted on the surface of the rotor. A method of field weakening was implemented into electronic converter supplying the motor to increase the rotation speed from 1500 up to 2250 rpm. A number of laboratory test were done. The paper presents results of the tests and shows the area of installation of PM motors. Komel Centre is ready to design and manufacture motors with PM for different application (rail traction, electric cars and vehicles, pumping systems etc).
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2006, 74; 11-17
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reduction of electric locomotives energy consumption by scalable tractive power control
Autorzy:
Andryushchenko, A.
Kolpahchyan, P.
Zarifyan, A.
Powiązania:
https://bibliotekanauki.pl/articles/375431.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
electric locomotive
energy efficiency
multi-engine
electric traction drive
partial load
scalable tractive power control
lokomotywa elektryczna
efektywność energetyczna
multi-silnik
elektryczny napęd trakcyjny
obciążenie częściowe
Opis:
At the beginning of the paper, the analysis of energy efficiency indicators for freight electric locomotive with asynchronous traction drive feeding from AC network under various operating conditions including when working with trains of various masses is made. The movement on different railway sections is considered. The graphs of locomotive’s speed, traction force, consumed power, and power for the traction obtained by on-board recorder are shown. In addition, the dependence of the locomotive's energy efficiency from the degree of using of its available traction capacity has been experimentally obtained, the greater is the using of the locomotive’s capacity, the greater will be its efficiency. On the basis of the performed analysis of energy efficiency indicators for various operating conditions, the proposals for their improvement are formulated. The algorithm ensuring the stabilization of the instantaneous value of efficiency at partial load to its nominal level at full load is presented. This algorithm is the implementation of Scalable Power Control Technology with respect to the problem of reducing electricity consumption for electric locomotive traction. The direct the experimental confirmation of energy consumption reduction for freight electric locomotive due to the application of our proposals (under the same operating conditions of the locomotive) is obtained.
Źródło:
Transport Problems; 2018, 13, 2; 103-110
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przekładnia elektryczna lokomotywy spalinowej prądu zmiennego z prądnicą synchroniczną i asynchronicznymi silnikami pierścieniowymi
Alternating – current electric transmission of the diesel locomotive with synchronous generator and asynchronous traction slip-ring motors
Autorzy:
Lukov, N.
Babeł, M.
Woszczyna, B.
Powiązania:
https://bibliotekanauki.pl/articles/253159.pdf
Data publikacji:
2017
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
lokomotywa spalinowa
przekładnia elektryczna
prądnica synchroniczna
silnik trakcyjny asynchroniczny
silnik pierścieniowy
diesel locomotive
electric transmission
synchronous generator
asynchronous traction slip-ring motors
Opis:
Zastosowanie w lokomotywach spalinowych trakcyjnych prądnic prądu zmiennego pozwala opracować przekładnie elektryczne prądu zmiennego, polepszające wskaźniki techniczno-ekonomiczne lokomotyw. Przedstawiono opis zasady działania, schematy, właściwości i charakterystyk opracowanej przekładni elektrycznej, składającej się z prądnicy synchronicznej, asynchronicznych silników trakcyjnych pierścieniowych, autonomicznego trakcyjnego falownika prądu o prostej konstrukcji i prostowników niesterowanych. W opracowanej przekładni energia poślizgu silników trakcyjnych oddawana jest do ich uzwojeń stojana.
The use of alternating-current generators on diesel locomotives allows for development of alternating-current transmissions to improve the technical and economical indicators relating to the locomotives. A description of the operation principle, schematics, parameters and characteristics of the developed electric transmission, consisting of a synchronous generator, asynchronous traction slipring motors, an autonomous traction inverter of a simple construction and non-controlled rectifiers. was presented In the developed transmission, the slip energy of the traction motors is transferred to their stator windings.
Źródło:
TTS Technika Transportu Szynowego; 2017, 10; 41-44
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przekładnia elektryczna lokomotywy spalinowej prądu zmiennego z asynchronicznymi silnikami trakcyjnymi zwartymi bez falowników trakcyjnych
AC electric transmission of diesel locomotive with asynchronous traction motors compacted without traction inverters
Autorzy:
Lukov, Nikolay
Babeł, Marek
Powiązania:
https://bibliotekanauki.pl/articles/34601872.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Poznański Instytut Technologiczny
Tematy:
lokomotywa spalinowa
przekładnia elektryczna
prąd zmienny
silnik trakcyjny asynchroniczny
silnik zwarty
prądnica trakcyjna asynchroniczna
diesel locomotive
AC electric transmission
AC
asynchronous traction motors compacted
traction asynchronous generator
Opis:
Zastosowanie do napędu na lokomotywach spalinowych trakcyjnych prądnic prądu zmiennego pozwala opracować przekładnię elektryczną prądu zmiennego bez użycia falowników trakcyjnych, zwiększyć wskaźniki techniczno-ekonomiczne tego typu lokomotyw. W artykule przedstawiono opis schematów, właściwości i charakterystyk przekładni elektrycznej, w skład której wchodzą - trakcyjna prądnica asynchroniczna i asynchroniczne silniki trakcyjne zwarte.
Application for driving in diesel locomotives of the AC traction generator allow to develop the AC transmission without using the traction inverters, to increase the technical-economic gauges of this type of locomotives. The article presents the description of diagrams, properties and characteristics of the electric transmission, which includes – the traction asynchronous generator and asynchronous compacted traction motors.
Źródło:
Rail Vehicles/Pojazdy Szynowe; 2015, 3; 50-53
0138-0370
2719-9630
Pojawia się w:
Rail Vehicles/Pojazdy Szynowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przekładnia elektryczna lokomotywy spalinowej prądu zmiennego, z asynchronicznymi silnikami trakcyjnymi z wirnikiem pierścieniowym bez falowników trakcyjnych
Alternating-current electric transmission of the diesel locomotive with asynchronous traction slip-ring motors without traction inverters
Autorzy:
Łukov, N.
Babeł, M.
Powiązania:
https://bibliotekanauki.pl/articles/253281.pdf
Data publikacji:
2018
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
lokomotywa spalinowa
przekładnia elektryczna
prądnica synchroniczna
silnik trakcyjny asynchroniczny
diesel locomotive
electric transmission
synchronous generator
asynchronous slip-ring motor
Opis:
Zastosowanie w lokomotywach spalinowych trakcyjnych prądnic synchronicznych pozwala opracować przekładnie elektryczne prądu zmiennego bez stosowania falowników częstotliwości i zwiększyć wskaźniki techniczno-ekonomiczne lokomotyw. Przedstawiono opis schematów i charakterystyk przekładni elektrycznej, składającej się z trakcyjnej prądnicy synchronicznej i asynchronicznych silników trakcyjnych pierścieniowych. Przy tym jeden z każdej pary silników posiada stojan obrotowy, a obydwa te silniki tworzą konstrukcyjnie jeden zespół.
Use of traction synchronous generators on diesel locomotives allows for development of alternating-current electric transmissions without traction inverters and for increasing technical and economic performance of locomotives. A description of the schematics and characteristics of an electric transmission consisting of an asynchronous traction generator and asynchronous traction ring motors was presented. In this case, one of each pair of motors has a rotary stator, and both motors are designed as a single assembly.
Źródło:
TTS Technika Transportu Szynowego; 2018, 5; 31-33
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies