Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "scrubber" wg kryterium: Temat


Wyświetlanie 1-14 z 14
Tytuł:
Future needs for ship emission abatement and technical measures
Przyszłe potrzeby ograniczania emisji ze statków i techniczne środki ich realizacji
Autorzy:
Antes, T.
Szudyga, M.
Śliwiński, Ł.
Jaworek, A.
Krupa, A.
Balachandran, W.
Di Natale, F.
Gregory, D.
Jackson, M.
Powiązania:
https://bibliotekanauki.pl/articles/374561.pdf
Data publikacji:
2013
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
diesel engine
exhaust gas
diesel particulate matter
electrostatic scrubber
emission control
silnik Diesla
gaz wylotowy
ograniczenie emisji
Opis:
The International Maritime Organization (IMO) has revised air pollution regulations in MARPOL Annex VI. In 2012 Emission Control Areas (ECA) will limit fuel sulphur content to 1% and from 2015 to 0.1%). NOx emissions based on ships engine speed are also reduced for new vessels (2012 & 2016). Facing this legislation, ship owners have the alternative either to operate ships with costly low-sulphur fuels, or to keep using HFO but together with a gas cleaning equipment at the ship stack in order to reduce the rejected amount of SO2 gas in the atmosphere. To achieve this requirement, research and development organizations came out with proposing a solution that uses a device for cleaning exhaust gas of marine diesel engines. The paper presents a short communication about the DEECON project, which aim is to create a novel on-board after-treatment unit more advanced than any currently available. Each sub-unit of the system will be optimized to remove a specific primary pollutant. In particular, the technology within the DEECON system is based on novel or improved abatement techniques for reducing SOx, NOx, Particulate Matter (PM), CO and Volatile Organic Compounds (VOC). Some of these technologies are completely new for the maritime sector and they will represent a breakthrough in the reduction of the atmospheric emissions of ships, moving forward the performance of exhaust gas cleaning systems and fostering and anticipating the adoption of future and tighter regulatory requirements. In addition, an after-treatment strategy enables the possible adoption of alternative fuels, which often have their own emissions characteristics.
Na właścicieli statków i przewoźników morskich spadł obowiązek redukcji zanieczyszczeń pochodzących z ich działalności. Aby spełnić rygorystyczne wytyczne: dyrektyw Wspólnoty europejskiej, międzynarodowej organizacji morskiej (aneks VI, konwencji) MARPOL oraz praw wewnętrznych innych państw należałoby, w obszarach kontroli emisji, używać jako paliwa oleju napędowego o zmniejszonej zawartości siarki. Obszar kontroli emisji jest to obszar obejmujący Morze Bałtyckie, Morze Północne wraz z jego podejściami pod Kanał La-Manche oraz obszar wokół USA. Ze względu na wysokie ceny paliwa niskosiarkowego, duże koszty ewentualnych zmian technicznych przejścia na paliwo o niższej zawartości siarki spowoduje kilkakrotne zwiększenie opłat i zmniejszy atrakcyjność transportu morskiego. Naprzeciw tym wymaganiom wyszły jednostki badawczo rozwojowe, proponując rozwiązania polegające na zastosowaniu nowych, bardziej skutecznych urządzeń do końcowego oczyszczania spalin z okrętowych silników diesla. Artykuł jest komunikatem projektu o akronimie DEECON, którego głównym celem jest opracowanie innowacyjnego pokładowego urządzenia do oczyszczania spalin z okrętowych silników diesla składającego się z różnych modułów. Urządzenie to będzie optymalizowane w celu usunięcia najważniejszych zanieczyszczeń tj. SOx, NOx, PM, Lotnych Związków Organicznych (VOC) oraz tlenku węgla (CO). Niektóre z tych technologii są całkowicie nowe w przemyśle morskim i stanowią przełom w redukcji emisji zanieczyszczeń do atmosfery. Ponadto, takie rozwiązanie jest uniwersalne, umożliwia zastosowanie alternatywnych paliw do zasilania silników okrętowych, które często mają własne cechy emisji.
Źródło:
Transport Problems; 2013, 8, 3; 101-107
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of venturi scrubber efficiency for pesticide industry
Autorzy:
Desai, R.
Sahu, O.P.
Powiązania:
https://bibliotekanauki.pl/articles/11827.pdf
Data publikacji:
2014
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
venture
scrubber efficiency
pesticide
industry
air pollution
human health
air pollutant
toxicity
Opis:
A venturi scrubber is designed to effectively use the energy from the inlet gas stream to atomize the liquid being used to scrub the gas stream. This type of technology is a part of the group of air pollution controls. The air pollution generated from the industry is now become serious problem for the environment, which affect the living and non living thing on the Earth. Among all the air pollution monitoring equipment venturi scrubber found to suitable for prevention of air pollution by pesticide. It was found that scrubber shows 99.1 % efficiency.
Źródło:
International Letters of Natural Sciences; 2014, 04
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The risk of hydrogen explosion in a submarine. Part 2, Catalyst bed flow resistance
Zagrożenie wybuchem wodoru na okręcie podwodnym. Cz.2, Opory przepływu złoża katalizatora
Autorzy:
Kłos, R.
Powiązania:
https://bibliotekanauki.pl/articles/366381.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Medycyny i Techniki Hiperbarycznej
Tematy:
flow resistance
scrubber filling flow resistance
opory przepływu
opory przepływu wypełnień skruberów
Opis:
This series of articles presents the problem of undertaking the high risk project of modernisation of hydrogen incinerators on a submarine. The article describes technical issues connected with the flow capacity of a modernised hydrogen incinerator.
W cyklu artykułów przedstawiono problematykę prowadzenia projektu dużego ryzyka na przykładzie modernizacji spalarek wodoru na okręcie podwodnym. W artykule opisano techniczne problemy związane z przepustowością zmodernizowanej spalarki wodoru.
Źródło:
Polish Hyperbaric Research; 2016, 4(57); 7-18
1734-7009
2084-0535
Pojawia się w:
Polish Hyperbaric Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new design of wet scrubber for removal of fine particles from exhaust gas
Autorzy:
Liao, B.
Juang, S. H.
Lin, H.
Powiązania:
https://bibliotekanauki.pl/articles/208160.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
cleaning methods
filter surface
solid particles
Venturi scrubber
combustion gases
płuczka Venturiego
cząstki stałe
metody oczyszczania
gazy spalinowe
Opis:
Bag-house dust collectors are commonly used in the industry for removing solid particles from dust laden gas. Bag house filter media need to be periodically cleaned in order to remove accumulated particles from the filter surface. Pulse jet cleaning is the most common cleaning method but produces noise increment of about 30-40 dB, which is its major disadvantage. The present study reports on a new type of combined wet scrubber-Venturi scrubber in the shape of a cyclone. The proposed design eliminates the noise associated with the pulse jet filter-cleaning process and filter bag replacement costs. The experimental results were demonstrated with high efficiency in the design.
Źródło:
Environment Protection Engineering; 2016, 42, 1; 59-70
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electron beam treatment of simulated marine diesel exhaust gases
Autorzy:
Licki, J.
Pawelec, A.
Zimek, Z.
Witman-Zając, S.
Powiązania:
https://bibliotekanauki.pl/articles/148426.pdf
Data publikacji:
2015
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron accelerator
electron beam treatment
free radicals
marine diesel exhaust gases
NOx removal
seawater scrubber
Opis:
The exhaust gases from marine diesel engines contain high SO2 and NOx concentration. The applicability of the electron beam flue gas treatment technology for purification of marine diesel exhaust gases containing high SO2 and NOx concentration gases was the main goal of this paper. The study was performed in the laboratory plant with NOx concentration up to 1700 ppmv and SO2 concentration up to 1000 ppmv. Such high NOx and SO2 concentrations were observed in the exhaust gases from marine high-power diesel engines fuelled with different heavy fuel oils. In the first part of study the simulated exhaust gases were irradiated by the electron beam from accelerator. The simultaneous removal of SO2 and NOx were obtained and their removal efficiencies strongly depend on irradiation dose and inlet NOx concentration. For NOx concentrations above 800 ppmv low removal efficiencies were obtained even if applied high doses. In the second part of study the irradiated gases were directed to the seawater scrubber for further purification. The scrubbing process enhances removal efficiencies of both pollutants. The SO2 removal efficiencies above 98.5% were obtained with irradiation dose greater than 5.3 kGy. For inlet NOx concentrations of 1700 ppmv the NOx removal efficiency about 51% was obtained with dose greater than 8.8 kGy. Methods for further increase of NOx removal efficiency are presented in the paper.
Źródło:
Nukleonika; 2015, 60, No. 3, part 2; 689-695
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The implementation of a coefficient diagram method based polynomial controller for a non-linear process with a distributed control system in a chlorine scrubber system
Implementacja wielomianowego regulatora opartego na metodzie diagramu współczynników dla procesu nieliniowego z rozproszonym systemem sterowania w systemie płuczki chloru
Autorzy:
Murugan, T. Maris
Shankar, T.R. Kiruba
Powiązania:
https://bibliotekanauki.pl/articles/2173816.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
chlorination scrubber system
PID controller
distributed control system
DCS
coefficient diagram method
CDM
interacting conical tank
system oczyszczania chloru
regulator PID
rozproszony system sterowania
metoda diagramu współczynników
współpracujący zbiornik stożkowy
Opis:
The seawater desalination process is emerging as a substantial source of fresh water by removing salt and minerals from an infinite supply of seawater effectively. The first stage in a desalination plant is the use of chlorine gas to sterilize the microorganisms in the water. During excess chlorine leakage, an alert is activated, employees are relocated away from the site for a specific period, and dampers will be manually opened. This will cause unsafe working conditions and a waste of time. To overcome this problem, this paper proposes a coefficient diagram method based proportional integral derivative (CDM-PID) control strategy for the tune the control parameter with the distributed control system (DCS) interfaced conical tank. During operation, a 10% NaOH solution is injected into the top of the scrubber column using an ethylene-ter-polymer (ETA) designed distributor to ensure that the solution is evenly distributed across the packing surface. The three control strategies are compared to tune the control parameter with the DCS interfaced conical tank. Instead of the sodium hydroxide tank in the chlorine scrubber system, this work presents the pilot plant of DCS interfaced with two conical tank interacting systems with different liquid level heights. Here, the proposed CDM-PID controller is compared with the standard Ziegler-Nichols (ZN)-ultimate cycling method, and the internal model control (IMC) method. The results demonstrated that the proposed CDM-PID approach is superior to existing approaches in terms of low oscillation, settling period, and high robustness.
Proces odsalania wody morskiej staje się znaczącym źródłem świeżej wody dzięki skutecznemu usuwaniu soli i minerałów z nieskończonych zasobów wody morskiej. Pierwszym etapem w zakładzie odsalania jest użycie chloru gazowego do sterylizacji mikroorganizmów w wodzie. Podczas nadmiernego wycieku chloru zostanie aktywowany alarm, pracownicy zostaną na pewien czas przeniesieni z terenu zakładu, a klapy zostaną ręcznie otwarte. Spowoduje to niebezpieczne warunki pracy i stratę czasu. Aby rozwiązać ten problem, w niniejszym artykule zaproponowano strategię sterowania opartą na metodzie wykresu współczynników proporcjonalno-całkująco-różniczkujących (Coefficient Diagram Method-Proportional Integral Derivative – CDM-PID) w celu dostrojenia parametru sterowania za pomocą zbiornika stożkowego połączonego z rozproszonym systemem sterowania (Distributed Control System – DCS). Podczas pracy do góry płuczki wstrzykuje się 10% roztwór NaOH za pomocą dystrybutora zaprojektowanego z etylenu-ter-polimeru (Ethylene-Ter-Polymer – ETA), aby zapewnić równomierne rozprowadzenie roztworu na powierzchni wypełnienia. Trzy strategie sterowania są porównywane w celu dostrojenia parametru kontrolnego za pomocą zbiornika stożkowego połączonego z DCS. Zamiast zbiornika wodorotlenku sodu w systemie płuczki chloru, w niniejszej pracy przedstawiono Instalację Pilotażową DCS połączoną z dwoma współpracującymi ze sobą stożkowymi układami zbiorników o różnych wysokościach poziomu cieczy. Tutaj, proponowany regulator CDM-PID jest porównywany ze standardową metodą Zieglera-Nicholsa (ZN)-Ultimate Cycling oraz metodą kontroli modelu wewnętrznego (Internal Model Control – IMC). Wyniki pokazały, że proponowane podejście CDM-PID przewyższa istniejące podejścia pod względem niskich oscylacji, okresu osiadania i wysokiej odporności.
Źródło:
Gospodarka Surowcami Mineralnymi; 2022, 38, 4; 231--255
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modern desulfurization methods used in waste incineration equipment
Nowoczesne metody odsiarczania stosowane w urządzeniach termicznej utylizacji odpadów
Autorzy:
Niesler, M.
Vorbrodt-Strzałka, K.
Powiązania:
https://bibliotekanauki.pl/articles/357627.pdf
Data publikacji:
2013
Wydawca:
Politechnika Śląska
Tematy:
odsiarczanie
absorber
absorpcja
desulfurization
scrubber
absorption
Opis:
Decreasing the amount of sulfur dioxide emissions is one of the most critical concerns of environmental protection. These substances have huge influence on natural environment as well as on human health. The authors included information about the absorbtion process that takes place in absorbers. Also, the various types of absorbers are presented, along with applications and a short description. There are presented installations placed in Polish waste incineration plants.
Nowoczesne metody odsiarczania stosowane w urządzeniach termicznej utylizacji odpadów Zmniejszenie emisji dwutlenku siarki jest obecnie jednym z najważniejszych zagadnień ochrony środowiska. Związki te mają istotny wpływ na środowisko naturalne, w tym zdrowie człowieka. W artykule przedstawiono suche i mokre metody odsiarczania, wraz z ich porównaniem. Zawarto również informacje na temat procesu absorpcji zachodzącego w absorberach. Przedstawiono rodzaje absorberów, ich zastosowanie oraz sposób ich doboru, a także instalacje znajdujące się w polskich spalarniach odpadów.
Źródło:
Archiwum Gospodarki Odpadami i Ochrony Środowiska; 2013, 15, 4; 63-70
1733-4381
Pojawia się w:
Archiwum Gospodarki Odpadami i Ochrony Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ochistka vybrosov ot koksovykh pechejj s pomoshhju skrubbera nasadochnogo tipa
Cleaning of emissions from coke ovens at scrubber packed type
Autorzy:
Red'ko, A.
Chajjka, J.
Burda, J.
Powiązania:
https://bibliotekanauki.pl/articles/76341.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
scrubber
nozzle
gas cleaning
coke oven worker
exhaust gas
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 6
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Particulate matter emission reduction from marine diesel engines by electrohydrodynamic methods
Autorzy:
Sobczyk, Arkadiusz T.
Jaworek, Anatol
Marchewicz, Artur
Krupa, Andrzej
Czech, Tadeusz
Śliwiński, Łukasz
Charchalis, Adam
Powiązania:
https://bibliotekanauki.pl/articles/241550.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
exhaust gases
marine diesel engines
particulate matter
PM
scrubber
Opis:
Particulate matter (PM) and gaseous compounds (SO2, NOx, VOC) emitted by diesel engines causes serious global environmental problems and health impact. Despite numerous evidences about the harmfulness of diesel particles, the PM emission by diesel engines used by ships, cars, agricultural machines, or power generators is still unregulated, and the efficient removal of PM from diesel exhausts is still the major technological challenge. In order to comply with the International Maritime Organization regulation, the NOx emission is reduced by using selected catalytic reactor, and sulphur oxide emission has been reduced by using fuels of low sulphur content. However, both of those measures cannot be used for the reduction of PM emission produced during combustion of marine fuels. The lack of appropriate regulations results from insufficiently developed technology, which could remove those particles from exhaust gases. Conventional scrubbers currently available on the market remove only sulphur oxide with required collection efficiency, but the collection efficiency for PM2.5 is below 50%. The article discusses the technical means used for the removal of PM from marine diesel engines via applying electrohydrodynamic methods, in particular electrostatic agglomeration, as a method of nanoparticles coagulation to larger agglomerates, which could operate in two-stage electrostatic precipitation systems, and electrostatic scrubbers, which remove particles by electrically charged water droplets. The experimental results were obtained for a 2-stroke 73 kW diesel engine fuelled with marine gas oil (MGO). The agglomerator allowed increasing the collection efficiency from diesel exhausts for PM2.5 particles by about 12%, compared to electrostatic precipitator operating without agglomerator, and the total mass collection efficiency was above 74%. The collection efficiency of electrostatic scrubber was higher than 95wt.%. The advantage of using the electrostatic scrubber is that it can also reduce the SO2 emission by more than 90%, when HFO is used.
Źródło:
Journal of KONES; 2019, 26, 3; 203-210
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cleaning of process gas from gasification of solid recovered fluid — results of experimental research
Autorzy:
Sobolewski, A.
Szul, M.
Iluk, T.
Ostrowski, W.
Billig, T,
Powiązania:
https://bibliotekanauki.pl/articles/175137.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
gasification
SRF
process gas cleaning
high temperature filtration
oil scrubber
Opis:
The paper takes up the topic of energetic utilization of alternative fuels produced from wastes, particularly in case of solid recovered fuel gasification for cogeneration of heat and power in piston engine. Process gas cleaning for its energetic and chemical utilization has been discussed. Presented scope of research concerns technological designs for dry and wet gas cleaning methods developed by Institute for Chemical Processing of Coal. Furthermore identified main operational problems of both gas cleaning units have been presented. Description of the two types of gas cleaning units has been provided together with obtained results from laboratory analysis of moisture, tar and particle content measured in process gas generated from solid recovered fluid.
Źródło:
Transactions of the Institute of Fluid-Flow Machinery; 2017, 137; 59-70
0079-3205
Pojawia się w:
Transactions of the Institute of Fluid-Flow Machinery
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Organic pollutant removal from marine diesel engine off-gases under electron beam and hybrid electron beam and wet scrubbing process
Autorzy:
Sun, Yongxia
Chmielewski, Andrzej G.
Pawelec, Andrzej
Mattausch, Gösta
Torims, Toms
Powiązania:
https://bibliotekanauki.pl/articles/2055683.pdf
Data publikacji:
2021
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
electron beam
marine diesel engine
off-gases
organic pollutants
VOC
wet scrubber
Opis:
The removal of organic pollutants from ship emission was studied using two processes namely electron beam (EB) and hybrid EB with wet scrubbing process. A mobile accelerator unit was used to treat 4915 Nm3 /h of flue gas emitted from a tugboat in Riga Shipyard. A volume of 3 m3 seawater containing 36.8 mM of NaClO2 oxidant was used as a wet scrubber solution. Organic pollutants, mainly volatile organic pollutants (VOCs), were collected at three different sampling points, before and after irradiation vessels, and after wet-scrubber unit, respectively. They were collected with glass sampling bottles, tedlar bags, Coconut Shell Charcoal (CSC) sorbents and XAD-2 sorbents. CH3OH and CH3OH/CH2Cl2 (1:1) were used to extract VOCs from CSC and XAD-2 sorbents, respectively. Syringe filters were used to obtain the solid-free extraction solutions. They were concentrated using a micro-extractor under continuously blowing high-purity Ar. A gas chromatography–mass spectrometry (GC-MS) was used for analysis. The identified organic compounds were: aliphatic hydrocarbons (dodecane C12H26 to eicosane C20H42), aromatic hydrocarbon (toluene), esters (C3H7COOCH3, (C4H9OCO)2C6H4), nitro compounds (C3H5NO3, C4H7NO2) and acid (C7H15COOH). After 4.2 kGy EB irradiation, around 50–100% aliphatic hydrocarbons, 83% toluene and 7.5% (C4H9OCO)2C6H4 were removed from the off-gases, and after EB hybrid wet-scrubber process, most organic compounds including nitro compounds were removed. Only trace amount of toluene, hexadecane, octadecane and dibutyl phthalate were found to be present in the gas phase.
Źródło:
Nukleonika; 2021, 66, 4; 193--199
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of dynamic characteristics of the scrubber based dimensional model in the software package ANSYS
Autorzy:
Usmanova, R.
Klimecka-Tatar, D.
Zaikov, G.
Powiązania:
https://bibliotekanauki.pl/articles/111966.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
computational domain
dynamic scrubber
swirler
hydraulic resistance
domena obliczeniowa
płuczka dynamiczna
zawirowywacz
opór hydrauliczny
Opis:
This paper deals with the mathematical modeling of the separation process in the dynamic scrubber with the generation of the model in Ansys CFX software. A model of gas flow and dispersion medium and the hydrodynamic picture of a swirling movements phases is obtained. The conducted research provide an opportunity to predict aerohydrodynamic characteristics of the device at the design stage. Doing so may provide design solutions to such units of the apparatus that could dramatically improve the efficiency of gas cleaning.
Źródło:
Production Engineering Archives; 2014, 5, 4; 42-46
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odpylanie mokre w skruberze ze zderzającymi się strumieniami
Wet dust removal in a scrubber with the colliding streams
Autorzy:
Wrzesińska, B.
Witman, S.
Powiązania:
https://bibliotekanauki.pl/articles/1819830.pdf
Data publikacji:
2009
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
skruber
odpylanie mokre
strumień
wet dust removal
scrubber
stream
Opis:
W wielu procesach technologicznych związanych z ochroną atmosfery pojawia się problem oczyszczania gazów z zanieczyszczeń stałych. Znanych jest wiele metod separacji pyłu ze strumienia gazowego, wykorzystujących różne mechanizmy odpylania i aparaturę. Pyły wydzielane są z gazu w wyniku zderzenia cząstek z powierzchnią kolektora. Kolektorami mogą być powierzchnie płaskie, cylindryczne, kuliste oraz elementy o nieregularnych kształtach. Zderzenie cząstki z powierzchnią kolektora następuje w wyniku bezpośredniego zaczepienia, pod wpływem sił grawitacji, bezwładności, dyfuzyjnych lubelektrostatycznych. Odpylanie gazów można realizować metodami suchymi lub mokrymi.Odpylanie suche prowadzone jest w odpylaczach grawitacyjnych (np. w komorach pyłowych), uderzeniowo-inercyjnych, odśrodkowych (np. w cyklonach,multicyklonach, odpylaczach wirowych), filtracyjnych (z filtrami tkaninowym, warstwowymi, włóknistymi, ziarnistymi) oraz elektrofiltrach. Odpylanie mokre polega na wydzieleniu cząstek aerozolowych z zapylonego gazu podczas kontaktu z cieczą. Faza ciekła spełnia tu rolę bezpośredniego kolektora. Strumień cieczy przepływający przez odpylacz (najczęściej tę rolę spełnia woda) niezależnie od tego czy jest w postaci kropel, warstewek, czy strug usprawnia efekt wydzielenia, zwiększając tym samym sprawność odpylania. W skruberach natryskowych, strumieniowych, odśrodkowych, mechanicznych oraz Venturiego bazuje się na natrysku w postaci kropel bądź strug.W skruberach z wypełnieniem odpylenie odbywa się na strugach lub warstewkach cieczy.
Dust removal is an important problem in many technological processes and atmosphere protection. One of the methods of solid particle separation is the wet dedusting. The results of the experimental investigations of dust removal in a scrubber with colliding liquid streams are presented in this paper. Two mechanisms of dust separation are considered. Thanks to the scrubber geometry, aerosol particles are casted off from the rotating air stream to the wet walls of cylindrical apparatus using centrifugal forces. Additionally the particles collides with the water droplets by reason of the inertial forces. The droplets are generated due to the collision of two liquid streams at an angle 180o. The whirling movement of gas and the liquid spraying were used to eliminate silica dust from the air stream. The scrubber construction, experimental set-up, methods of measurement and results are described. The effect of air and liquid flow rates on the aerosol removal effectiveness was studied. It was determined that, the wet dust removal efficiencies ranged from ca. 92% for 1žm particles to above 95% for 10 žm particles. The removal efficiency depends mainly on the water flow rate. The dry separation efficiency depends strongly on the gas flow rate. It was possible to remove 60% of the small particles and ca. 80% of the biggest particles. Efficiency of wet dust removal depends mainly on the size of streams of liquid feeding nozzles, an in smaller degree on gas velocity. High efficiency is a result of collisions of solid particles with water drops moving quickly, which are generated during collision of two streams of liquid flowing out from nozzles placed opposite each other. Additionally centrifugal force was used for imparting aerosol particles radial velocity. Particles which collided with the walls of the device were washed by water. This prevented secondary dusting. Whirling movement of gas stream increased dedusting efficiency, and efficiency of water drops removal in the upper part of the scrubber.
Źródło:
Rocznik Ochrona Środowiska; 2009, Tom 11; 889-898
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effectiveness of Removal of Odorous Compounds from a Poultry Farm in a Water Scrubber with Sand Filling
Autorzy:
Wysocka, Izabela
Boguszewicz, Adam
Powiązania:
https://bibliotekanauki.pl/articles/123866.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
deodorization
barbotage column
scrubber water
absorption of filling
odors
Opis:
Breeding facilities are the source of numerous complaints regarding the odor nuisance. For this reason, numerous attempts are made to reduce the odor nuisance of such objects. One of the methods of deodorizing the gases from breeding facilities might be the sorption of odorants in water scrubbers. This article presents the effectiveness of removing this type of impurities from water scrubbers with suspended sand filling. An increase in deodorization efficiency was observed, compared to the water scrubbers without fill ranging from 55% to 62%, depending on the time of gas contact with the sorbent in the scrubbers.
Źródło:
Journal of Ecological Engineering; 2019, 20, 2; 141-145
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-14 z 14

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies