Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "reservoir pressure" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Underbalanced interventions in gas wells belonging to mature fields
Autorzy:
Tataru, A.
Balazs, S.
Foidas, I.
Powiązania:
https://bibliotekanauki.pl/articles/299050.pdf
Data publikacji:
2017
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
initial reservoir pressure
base production
workover
abandoned
underbalance
live well
coiled tubing
Opis:
The exploitation of natural gas fields from Transylvanian Basin started a century ago. The majority of these fields were discovered and developed in the last century, from the 1920s through the 1980s. So, these reservoirs have almost 100 years of production historical. Even if at their discovery, the initial reservoir pressures were relative high (around 100-150 bar), nowadays these mature gas fields have a very low reservoir pressure. For some of these reservoirs the pressure is 10-20 of initial values. With the rehabilitation projects ongoing, and where the challenge is to maintain or even better to increase by just a little the base production, the greatest challenge is to make certain interventions in depleted reservoirs wells. At the beginning it was not a problem to do workover for these wells because the completion fluids were lost in the reservoir and the reservoir pressures helped the wells to clean up. Now, because of the low reservoir pressures, after the interventions it would take a long time for the wells to be cleaned, or in the worst cases the wells could be abandoned. From time to time, some net pays have to be bypassed because the fluid can be lost in the reservoir. So the best method is to do workovers jobs in these wells underbalance or even with live well, and interventions using snnubing unit or the coiled tubing unit. This paper presents some of the technologies used by Romgaz to accomplish this goal and also some case studies from different types of interventions in these gas wells.
Źródło:
AGH Drilling, Oil, Gas; 2017, 34, 2; 553-567
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Changing well completion in a mature gas well using velocity string
Zmiana sposobu wiercenia otworu na dojrzałym złożu gazowym z wykorzystaniem przewodu o większej prędkości
Autorzy:
Piteiu, M. A.
Sutoiu, F.
Simescu, B.
Costin, N.
Powiązania:
https://bibliotekanauki.pl/articles/300578.pdf
Data publikacji:
2008
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
opróbowanie otworów
gaz ziemny
produkcja
ciśnienie złożowe
well completions
natural gas
production
reservoir pressure
Opis:
In a gas field production decreases over time and can eventually stop producing completely because of liquid loading. As the reservoir pressure in a gas well depletes, there may be insufficient velocity to transport all liquids from the wellbore. In time, these liquids accumulate and impair production. The factors that are causing this problem include declining reservoir pressure, gas velocities and increased water production. One method of restoring a well that is liquid loaded back to flow production is installing a smaller diameter tubing string to run inside the production tubing of a well. Regarding advanced rate of depletion in Romgaz gas fields, reinjection method gives viable solutions to face the problems that appear in the exploitation of the wells with appreciable liquid impurities production.
Z czasem produkcja na złożu gazowym ulega zmniejszeniu aż do całkowitego jej zaprzestania. Ciśnienie złożowe w otworach gazowych zmniejsza się powodując, że brak będzie siły wynoszącej płyny z otworu na zewnątrz. Z czasem płyny te kumulują się, uniemożliwiając dalszą produkcję. Czynnikami odpowiedzialnymi za te utrudnienia są obniżenie wartości ciśnienia złożowego, zmniejszone prędkości przepływu gazu oraz zwiększona produkcja wody. Jedną z metod stosowanych w przypadku otworów z reiniekcją jako sposobem na wymuszenie produkcji jest zastosowanie rur produkcyjnych o mniejszej średnicy wewnątrz rury wydobywczej. Metoda ta - iniekcji - jest skutecznym rozwiązaniem tego problemu w firmie ROMGAZ.
Źródło:
Wiertnictwo, Nafta, Gaz; 2008, 25, 2; 595-601
1507-0042
Pojawia się w:
Wiertnictwo, Nafta, Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zaczyny o obniżonej gęstości stosowane w warunkach występowania komplikacji w otworze wiertniczym
Light weight cement slurries used in condition of complications in the wellbore
Autorzy:
Kremieniewski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/2143419.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
zaczyn lekki
zaczyn cementowy
frakcjonowanie
wypełniacz lekki
stabilność sedymentacyjna
anomalnie niskie ciśnienie
ciśnienie złożowe
lightweight cement slurry
fractionation
light filler
sedimentation stability
anomalously low pressure
reservoir pressure
Opis:
Podczas realizacji otworu wiertniczego mogą się pojawić różnego rodzaju problemy, których efektem są komplikacje wiertnicze. Jednym z takich problematycznych aspektów jest wiercenie w strefach anomalnie wysokiego i anomalnie niskiego ciśnienia złożowego. W przypadku występowania takich stref zachodzi ryzyko wtargnięcia medium złożowego w strukturę cieczy wiertniczej lub ucieczki cieczy wiertniczej w strefę warstw chłonnych. Zjawiska takie mogą zachodzić na skutek zaburzenia równowagi ciśnień w otworze. W celu wyeliminowania tych niebezpiecznych sytuacji stosuje się płuczki i zaczyny cementowe o odpowiednio dobranej gęstości i odpowiednich parametrach reologicznych. W celu uszczelnienia kolumn rur posadowionych w strefie anomalnie niskiego ciśnienia złożowego należy stosować receptury zaczynów o obniżonej gęstości. Zaczyny takie otrzymuje się poprzez wprowadzenie do ich objętości lekkich wypełniaczy. Jednak podczas projektowania takiej receptury zaczynu lekkiego często pojawiają się problemy z uzyskaniem odpowiedniej stabilności sedymentacyjnej. Frakcjonowanie lekkich cząsteczek w zaczynie powoduje występowanie anizotropii w strukturze zarówno płynnego, jak i związanego zaczynu. Przejawia się to znacznymi różnicami w uzyskanych wartościach parametrów (m.in. gęstości, przepuszczalności dla gazu, wytrzymałości na ściskanie, porowatości) w zależności od miejsca pobrania próbki. W celu wyeliminowania tego zjawiska badaniom na etapie projektowania danej receptury poddawane są zarówno dodatki i domieszki, jak też same zaczyny sporządzone przy użyciu tych środków. Zaprojektowanie zaczynu cementowego odpowiedniego do danych warunków geologiczno-technicznych pozwala zapobiec wystąpieniu lub wyeliminować wystąpienie w otworze wiertniczym komplikacji, mogących powstać na przykład na skutek rozwarstwienia zaczynu i uzyskania niejednorodnej gęstości na całej długości uszczelnianego interwału. W niniejszym artykule przedstawione zostały wyniki badań dla 5 receptur zaczynów lekkich. Receptura bazowa to zaczyn zawierający 15% mikrosfery glinokrzemianowej, którego matryca cementowa jest doszczelniona dodatkiem mikrocementu. Natomiast pozostałe receptury to zaczyny, które zawierają 40% mikrosfer glinokrzemianowych. W recepturach przeznaczonych do uszczelniania otworów w rejonie możliwości pojawienia się komplikacji wiertniczych zastosowano dodatkowo aktywator wiązania, który spowodował wzrost parametrów reologicznych. Pozwoliło to wyeliminować frakcjonowanie lekkiego dodatku wypełniającego. Działanie takie było niezbędne ze względu na konieczność zainicjowania i przyspieszenia procesu hydratacji w niskiej temperaturze (30°C), ale również wyeliminowania anizotropii mikrostruktury płaszcza cementowego, który mógł się wytworzyć z niejednorodnego zaczynu cementowego. W celu doszczelnienia matrycy płaszcza cementowego zastosowano dodatek lateksu, a ponadto zaprojektowane zostały zaczyny bez domieszki lateksu. Opracowane receptury zaczynów mogą być stosowane w warunkach temperatury od 30°C do ponad 50°C w rejonie wystąpienia ewentualnych komplikacji wiertniczych związanych z anomalnie niskimi ciśnieniami złożowymi.
Problems of various kinds may arise during the execution of the borehole, resulting in drilling complications. One such problematic aspect is drilling in anomalously high and anomalously low reservoir pressure zones. In the presence of such zones, there is a risk of the formation medium intrusion into the structure of the drilling fluid or the drilling fluid escaping into the thief zone. Such a phenomenon may occur as a result of an imbalance of pressures in the borehole. In order to eliminate this phenomenon, cement scrubbers and slurries with appropriately selected density and rheological parameters are used. In order to seal columns of pipes located in the zone of anomalously low formation pressure, the formulas for reduced density slurries should be used. Such starters are obtained by introducing light fillers into their volume. However, when designing such a light cement slurry formula, problems often arise in obtaining adequate sedimentation stability. The fractionation of light molecules in the cement slurry causes anisotropy in the structure of both the liquid and the bound cement slurry. It is manifested by significant differences in the obtained parameter values (e.g. density, gas permeability, compressive strength, porosity) depending on the place of sample collection. In order to eliminate this phenomenon, both additives and admixtures, as well as the slurries prepared using these agents, are tested at the stage of designing a given formula. Designing a cement slurry suitable for the given geological and technical conditions allows to prevent or eliminate the occurrence of complications in the borehole, which may arise, for example, as a result of slicing of the slurry, and to obtain a non-uniform density along the entire length of the sealed interval. This article presents the research results for 5 light weight cement slurries. The base formula is a cement slurry containing 15% aluminosilicate microsphere, the cement matrix of which is sealed with the addition of microcement. The other formulas, on the other hand, are slurries that contain 40% of aluminosilicate microspheres. In the formulas intended for sealing boreholes in the area of possible drilling complications, a binding activator was additionally used, which caused an increase in rheological parameters. This allowed the elimination of fractionation of the light filler additive. Such action was necessary due to the need to initiate and accelerate the hydration process at a low temperature of 30°C, but also to eliminate the anisotropy of the microstructure of the cement sheath, which could be produced from the inhomogeneous cement slurry. In order to seal the matrix of the cement mantle, the addition of latex was used, but additionally slurries without the admixture of latex were designed. The developed slurry formulas can be used in temperature conditions from 30°C to over 50°C in the area of possible drilling complications related to anomalously low formation pressures.
Źródło:
Nafta-Gaz; 2021, 77, 11; 736-743
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Układ faz węglowodorowych w obszarze złożowym Lubiatów - Międzychód - Grotów (LMG)
Distribution of hydrocarbon phases in the Lubiatów - Międzychód - Grotów (LMG) oil and gas field area
Autorzy:
Słupczyński, K.
Machowski, G.
Papiernik, B.
Semyrka, R.
Powiązania:
https://bibliotekanauki.pl/articles/183912.pdf
Data publikacji:
2008
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
warunki PVT
fazy węglowodorowe
przestrzeń międzyfazowa
kontakt gaz-ropa (GOC)
ciśnienie wgłębne
platforma węglanowa
równowaga statyczna
LMG
hydrocarbon phases
interfacial space
gas-oil contact (GOC)
reservoir pressure
PVT
carbonate platform
stable equilibrium
Opis:
Dla strefy złożowej Lubiatów - Sowia Góra - Międzychód - Grotów (LMG), umiejscowionej w obszarze platformy węglanowej i na jej przedpolu, w poziomie dolomitu głównego Ca2, kryteriami równowagi statycznej zachodzącej w ośrodkach porowo-szczelinowych wypełnionych oddzielnymi fazami węglowodorowymi, wyznaczono fazowe powierzchnie rozdziału kondensatowego gazu ziemnego od nasyconej gazem ropy naftowej. Udowodniono łączność hydrauliczną pomiędzy poszczególnymi komercyjnymi polami zasobów reprezentującymi oddzielne złoża węglowodorów. Wykazano, że wąskie strefy o miąższości poniżej 15 m, o różnej hipsometrii, spełniają tylko rolę semiprzepuszczalnych ograniczeń komercyjnych pól zasobowych. Wyznaczone powierzchnie rozdziału gazu ziemnego i ropy naftowej znacznie rozszerzają powierzchnię akumulacyjną w obszarze występowania platformy węglanowej i jej przedpola.
For the Lubiatów - Sowia Góra - Międzychód - Grotów (LMG) hydrocarbon reservoir zone, situated within the area of the Main Dolomite carbonate platform and its foreland, interfacial surfaces between natural condensate gas and gas-saturated oil was determined applying the criterion of stable equilibrium in porous-fractured media filled with separate hydrocarbon phases. Hydraulic connection between individual hydrocarbon accumulations was proved. It was evidenced that narrow zones with Main Dolomite thickness less than 15 m and different hypsometric positions play the role of semi-permeable boundaries only. The determined surfaces between natural gas and crude oil considerably extend the accumulation zone in the area of the carbonate platform and its foreland.
Źródło:
Geologia / Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie; 2008, 34, 3; 469-487
0138-0974
Pojawia się w:
Geologia / Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of residual stresses for multi-layer circumferential welds of oil and gas pipelines
Autorzy:
Kychma, Andrii
Predko, Rostyslav
Powiązania:
https://bibliotekanauki.pl/articles/329392.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
pipelines
circumferential welds
residual stresses
pressure reservoir
hydraulic testing
rurociąg
naprężenia własne
spoiny spawane
zbiornik ciśnieniowy
badania hydrauliczne
Opis:
The article presents results of investigation of residual stresses for multi-layer circumferential welds of oil and gas pipelines. The research was carried out on a designed and manufactured testing equipment for the experimental determination of the stress state parameters in the zone of multi-layer welded joints of pipe segments with the external diameter of 1020 mm and the wall thicknesses of 9.5 mm, of 14 mm, and of 22 mm which were made of carbon steels of different quality (13G1S, 13G1SU, 17G1S and 17G1SU). Determination of residual stresses in the zone of multi-layered circumferential welds of pipe segments was carried out by means of the method by the electronic speckle-interferometry and by the method of magnetoelasticity. On the basic of analysis of the obtained graphic dependences, the recommendations for engineering practice are suggested.
Źródło:
Diagnostyka; 2019, 20, 4; 11-18
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The method for calculating technological indicators in the development of gas wells while considering the thermobaric and thermodynamic conditions within the “reservoir-well” system
Metoda obliczania wskaźników technologicznych eksploatacji odwiertów gazowych z uwzględnieniem warunków termobarycznych i termodynamicznych w układzie „złoże-odwiert”
Autorzy:
Gadasheva, Elmira V.
Novruzova, Sudaba
Powiązania:
https://bibliotekanauki.pl/articles/31348239.pdf
Data publikacji:
2023
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
gas reservoir
porosity
pressure
temperature
flow rate
gas riser
thermobaric reservoir condition
reservoir deformation
złoże gazu
porowatość
ciśnienie
temperatura
natężenie przepływu
rura wznośna gazu
warunki termobaryczne złoża
deformacja złoża
Opis:
Considering the substantial prevalence of gas fields in the pool of developed fields, their development requires specialized approaches with the primary objective of optimizing the production process. The effectiveness of gas field development hinges on achieving the highest possible gas recovery factor. Achieving a high limit of the ultimate return of gas fields relies on decisions that vary depending on the precision of design estimates carried out at different stages of development and their timely execution. The accuracy of such estimates is, if possible, directly contingent on the thorough consideration of geological, technical, and technological factors when formulating methods for determining field development and operation indicators. Given the above considerations, this article proposes a methodology for determining the technological indicators of gas reservoir development, which enables to anticipate changes in reservoir pressure, temperature, and porosity of the gas reservoir, while accounting for the gas-dynamic interplay within the “reservoir-well” system in the depletion phase. The developed approach makes it possible to reliably ascertain reservoir development metrics by factoring in well conditions, temperature distribution within the reservoir, and reservoir deformation. In addition, it facilitates the necessary assessment for determining optimal well operations in light of reservoir conditions.
Biorąc pod uwagę duży udział złóż gazu w eksploatowanych zasobach węglowodorów, ich zagospodarowanie wymaga zastosowania specjalistycznego podejścia, który ma przede wszystkim umożliwić jak najefektywniejsze przeprowadzenie tego procesu. Efektywna realizacja procesu udostępnienia złóż gazu polega przede wszystkim na osiągnięciu maksymalnego współczynnika wydobycia gazu. Podejmowanie decyzji w zależności od stopnia dokładności szacunków projektowych przeprowadzanych na dowolnym etapie zagospodarowania złoża i ich terminowe wdrażanie umożliwia osiągnięcie wysokich wartości wydobycia gazu. Z kolei zapewnienie dokładności takich szacunków, o ile jest to możliwe, zależy bezpośrednio od tego, czy przy tworzeniu odpowiednich metod określania wskaźników zagospodarowania i eksploatacji złoża uwzględnione zostaną w pełni czynniki geologiczne i techniczno-technologiczne. Biorąc pod uwagę powyższe, w artykule zaproponowano metodę określania technologicznych wskaźników zagospodarowania złóż gazu, która pozwala przewidywać zmiany ciśnienia złożowego, temperatury i porowatości w obrębie złoża gazu, biorąc pod uwagę zależność gazowo-dynamiczną układu „złoże-odwiert” w trybie sczerpywania. Opracowana technika umożliwia wiarygodne określenie wskaźników zagospodarowania złoża, z uwzględnieniem warunków panujących w odwiertach, rozkładu temperatury w złożu i deformacji złoża. Ponadto możliwe jest przeprowadzenie niezbędnej oceny w celu określenia optymalnych reżimów eksploatacji odwiertów, biorąc pod uwagę warunki panujące w złożu.
Źródło:
Nafta-Gaz; 2023, 79, 10; 678-683
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza przyczyn uszkodzenia rozpory słupowej systemu OWS-7
The analysis of double slide OWS-7 trench shoring system destruction
Autorzy:
Kopras, Marek
Powiązania:
https://bibliotekanauki.pl/articles/163024.pdf
Data publikacji:
2019
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
zbiornik retencyjny
obudowa
rozpora słupowa
parcie gruntu
woda gruntowa
awaria
reservoir
housing
column strut
soil pressure
ground water
structural failure
Opis:
Artykuł opisuje wpływ wody gruntowej na parcie gruntu na obudowę wykopów płytowych. Jak pokazano, zakłócenia w pracy pomp odwodnieniowych mogą być przyczyną awarii konstrukcji.
The article talks about the influence of water on the lateral earth pressure on retaining walls, meaning temporary shoring shields. As demonstrated, an interruption in the operation of dehydration pumps can cause a construction disaster.
Źródło:
Przegląd Budowlany; 2019, 90, 9; 67-69
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ zagospodarowania zlewni na jakość osadów dennych w wybranych zbiornikach zaporowych
Influence of land development in the drainage area on bottom sediment quality in some dam reservoirs
Autorzy:
Jancewicz, A.
Dmitruk, U.
Sośnicki, L.
Tomczuk, U.
Bartczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/236854.pdf
Data publikacji:
2012
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
zbiornik zaporowy
osady denne
presja antropogeniczna
metale ciężkie
WWA
pestycydy
polichlorowane bifenyle
dam reservoir
bottom sediments
anthropogenic pressure
heavy metals
PAH
pesticides
PCB
Opis:
Z przeprowadzonej analizy zagospodarowania zlewni zbiorników zaporowych w Nieliszu (zlewnia rolnicza) i Rybniku (zlewnia zurbanizowana) wynika, że warunki środowiskowe i antropogeniczne w zlewniach obydwu zbiorników są istotnie różne, co ma odzwierciedlenie w zanieczyszczeniu osadów dennych. Osady denne skumulowane w analizowanych zbiornikach różniły się pod względem wartości podstawowych wskaźników (substancje organiczne, biogeny, makroelementy), a także zawartości metali ciężkich oraz trwałych związków organicznych. Największe wartości większości analizowanych wskaźników zanieczyszczenia osadów dennych oznaczono w przypadku zbiornika w Rybniku. Wyjątek stanowiły azot ogólny, substancje organiczne, wapń, magnez, rtęć, lindan i DDE. Zanieczyszczenia mające charakter antropogeniczny, takie jak WWA i PCB, występowały w osadach ze zbiornika w Rybniku w ilościach dwukrotnie większych niż w osadach ze zbiornika w Nieliszu. Znaczna kumulacja cynku, kadmu i ołowiu może być wynikiem przemysłowego zagospodarowania zlewni zbiornika rybnickiego. Arsen, miedź i rtęć, których średnie geometryczne stężenia były większe w osadach dennych ze zbiornika w Nieliszu traktowane są jako zanieczyszczenia pochodzenia rolniczego.
Analysis of land development in the drainage areas of the Nielisz dam reservoir (rural drainage area) and Rybnik dam reservoir (urban drainage area) has revealed significant differences in the environmental and anthropogenic conditions between them, which are reflected in the pollution of bottom sediments. The bottom sediments in the two reservoirs differed in the values of main pollution parameters (organic substances, nutrients and macroelements), as well as in the concentrations of heavy metals and durable organic compounds. Except for total nitrogen, organic matter, calcium, magnesium, mercury, lindane and DDE, the highest concentrations of the pollutants being analyzed were measured in the Rybnik dam reservoir. In the Rybnik dam reservoir, bottom-sediment concentrations of anthropogenic pollutants such as PAHs and PCB were twice as high as in the Nielisz dam reservoir. The comparatively high accumulation of zinc, cadmium and lead seems to be attributable to the industrial activities in the drainage area of the Rybnik dam reservoir. Arsenic, copper and mercury, whose geometrical means of concentration were higher in the bottom sediments from the Nielisz dam reservoir, are regarded as pollutants associated with agricultural activities.
Źródło:
Ochrona Środowiska; 2012, 34, 4; 29-34
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integrating new data acquisition to develop tight gas reservoir of a mature field through multilayer fracture stimulations
Autorzy:
Stefanescu, D. P.
Falk, I.
Iturbe, Y.
Powiązania:
https://bibliotekanauki.pl/articles/299062.pdf
Data publikacji:
2015
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
tight gas reservoir
mature field
Mechanical Earth Model
fracture multistage simulation
fracture LGR model
special logging as formation microimager
pressure express
dipole sonic and PLT
Opis:
Laslau Mare field is situated in the central part of the Transylvania Basin, in Romania. This is a mature gas field, composed by multi-layered sandstone reservoirs, grouped in six production packages. The permeability of the reservoirs is decreasing with depth, resulting in tight gas formations in the two deepest reservoirs. One of these tight reservoirs presents a high interest for reserves development in order to accelerate the recovery factor of the field. Compared to the other production packages, which have higher recovery factors (~80%), this package has a current RF of only 65%, with more attractive remaining recoverable gas volumes. The reservoir model was built based on 3D seismic and old log data. After history matching and simulation, a remaining gas in place map was created, in order to visualize the areas of interest for future drilling or workover operations. One new infill well was drilled in 2014, in an area with higher remaining gas in place. Special logging and side- wall coring were executed in this well, in order to get a better characterization of the reservoir properties and to build a geomechanical model for hydraulic frac design. The subject package still has a decent reservoir pressure which keeps an acceptable value of the productivity index of the producer wells. The reservoir pressure recorded after the drilling helped to update the static reservoir pressure in the area; the new points were incorporated in the dynamic model in order to get morę control in the pressure history match. New population of static properties such as: porosity, net to gross and permeability have been included in the dynamic model to generate the forecast production profile for the infill well and neighbor wells. The infill is a dual completion well which means the deeper zone produces through the tubing and the shallower zone through the annulus being separated by a packer. These two zones have two different dynamic models. The production forecasts has been done also based on decline curve analysis DCA, using historical production of the neighbor wells as a reference and the decline rate of the area, in each reservoir. In that order of ideas the infill has two gas production forecasts coming from each methodology, to compare with the real gas production, which allows us evaluating the results in the well. Based on the new data, the frac stages were defined and simulated in the deeper tight reservoir, in order to select the best target layers. The initial plan was to do multistage frac stimulation, but the idea was discarded after evaluating the operational feasibility. Ten frac stages have been evaluated creating a local refmement grid around the well and designing a fracture simulation scenario. The results pointed out one stage as being the best in terms of cumulative production and it was chosen as the only finał target for frac. A PLT log was run in the infill well for the purpose of identifying the risk of water layers and the production contribution of the perforation intervals. This was matched very well with the simulation results. The results and experience gained from this new well are helping with the further planning of the production development strategy of this production package in order to inerease the final recovery factor.
Źródło:
AGH Drilling, Oil, Gas; 2015, 32, 1; 153-173
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the hydraulic characteristics of flushing fluid when gas enters wells drilled from semi-submersible drilling rigs
Analiza charakterystyki hydraulicznej płynu przemywającego, gdy gaz dostaje się do odwiertów, które wykonano z półzanurzalnych platform wiertniczych
Autorzy:
Ibrahimov, Rafiq
Bahshaliyeva, Shirin
Ibrahimov, Zaur
Powiązania:
https://bibliotekanauki.pl/articles/2143206.pdf
Data publikacji:
2022
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
hydraulika wiertnicza
hydrodynamic pressure
well
drilling hydraulic
drilling fluid
parameters
offshore drilling
drill pipe
blow-up prevention
reservoir fluids
resistance coefficients
ciśnienie hydrodynamiczne
odwiert
parametry
płyn wiertniczy
wiertnictwo morskie
rury płuczkowe
profilaktyka przeciwerupcyjna
płyny złożowe
współczynnik oporu przepływu
Opis:
The article considers how in recent years the study of hydraulics and hydrodynamics have been successfully used in the qualitative analysis of complications arising during the drilling of wells. One of the main factors determining the success of well drilling is hydrodynamic pressure. Also a boundary layer forms both on the wall of the casings and on the walls of the well has important means. One potential complication is the appearance of gas when a well is drilled from a semi-submersible drilling rig. The article deals with issues of clarifying the nature and eliminating gas, as well as preventive measures and their consequences. However, in order to take a final decision it is necessary to analyse the nature of the pressure change at the blowout preventer on a semi-submersible drilling rig. A number of works have been devoted to determining hydraulic pressure and hydraulic resistance in the circulation system of wells, on the basis of both stationary and non-stationary processes. Gas was observed in well no. 28 of the Sangachal-Sea field (Caspian Sea, Azerbaijan) at a depth of 3819 m and with a specific gravity of the flushing fluid of 2.25–2.27 g/cm3 . When the blowout preventer was closed, the pressure increased to 10 MPa for 2–3 hours, before decreasing to 2.5 MPa and stabilising. The conclusion from this is that if the flow rate, the angle of deviation of the installation and contact time of the surfaces are constant, the influence of the flushing fluid decreases as the pressure drop increases. As the fluid filtration rate increases, the friction force between the drill pipe and the borehole wall increases. The friction force between the surfaces of the column and the filter cake is inversely proportional to the fillet velocity.
W artykule wskazano w jaki sposób w ostatnich latach badania hydrauliczne i hydrodynamiczne zostały z powodzeniem wykorzystane do analizy jakościowej problemów powstających w procesie wiercenia otworów. Jednym z głównych czynników decydujących o powodzeniu wiercenia otworów jest ciśnienie hydrodynamiczne. Istotne znaczenie ma również tworzenie się warstwy przyściennej, zarówno na ściance rur okładzinowych, jak również na ścianie odwiertu. Jednym z problemów jest pojawienie się gazu podczas wiercenia odwiertu z platform półzanurzalnych. W artykule rozważane są zagadnienia związane z wyjaśnieniem charakteru i eliminacją przypadków pojawienia się gazu, ze środkami zapobiegawczymi i ich konsekwencjami. Jednak do podjęcia ostatecznej decyzji konieczne jest przeanalizowanie charakteru zmiany ciśnienia na głowicy przeciwerupcyjnej (BOP) na platformie półzanurzalnej. Szereg prac poświęcono wyznaczaniu ciśnienia hydrodynamicznego i oporu hydraulicznego w układzie obiegu płynu w odwiercie na podstawie procesów stacjonarnych i niestacjonarnych. W odwiercie nr 28 na polu Sangachal-Sea (Morze Kaspijskie, Azerbejdżan) zaobserwowano gaz na głębokości 3819 m, przy płynie przemywającym o gęstości 2,25–2,27 g/cm3 . Po zamknięciu głowicy przeciwerupcyjnej (BOP) ciśnienie wzrosło do 10 MPa na 2–3 godziny, a następnie spadło do 2,5 MPa i ustabilizowało się. Wynika z tego, że jeżeli natężenie przepływu, kąt odchylenia instalacji od pionu oraz czas kontaktu powierzchni są stałe, to czas płukania odwiertu maleje wraz ze wzrostem „spadku ciśnienia”. Wraz ze wzrostem szybkości filtracji płuczki wzrasta siła tarcia między rurą wiertniczą a ścianą odwiertu. Siła tarcia między powierzchnią kolumny rur a osadem filtracyjnym jest odwrotnie proporcjonalna do prędkości usuwania gazu z odwiertu.
Źródło:
Nafta-Gaz; 2022, 78, 6; 422-425
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies