Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "physical modeling" wg kryterium: Temat


Tytuł:
A movable string sieve - analysis of seed screening
Autorzy:
Kaliniewicz, Z.
Domański, J.
Powiązania:
https://bibliotekanauki.pl/articles/298132.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie
Tematy:
string sieve
modeling
physical properties
Opis:
The conditions of seed movement in a string sieve set into reciprocating motion have been formulated for cereal, vetch, pea, lupine and faba bean seeds. In the analyzed string sieve, seed movement was determined by a combination of the following parameters: angular velocity of the crank, crank radius, seed size, seed’s coefficient of external friction, string diameter and angle of inclination of the separator screen. A string sieve for cleaning and sorting most farm-produced seeds was analyzed. The width of the separating groove was set at 1 mm at the beginning of the screen and 11 mm at the end of the screen, and the strings had the diameter of 4 mm. Our results indicate that seeds cannot be effectively graded in the modeled string sieve. The angular velocity of the crank exceeds the velocity which is applied to power conventional separator buckets, and it could damage the separator. A reduction in the angular velocity of the crank to the recommended level caused seeds to become jammed directly before the screening site. The above problem can be solved by propelling seeds into motion with the use of special sweeping brushes.
Źródło:
Technical Sciences / University of Warmia and Mazury in Olsztyn; 2013, 16(4); 253-264
1505-4675
2083-4527
Pojawia się w:
Technical Sciences / University of Warmia and Mazury in Olsztyn
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A physical model of energetic processes in a diesel marine generator set
Autorzy:
Kniaziewicz, T.
Zacharewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/133961.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
physical model
modeling
diesel engine
diagnostics
model fizyczny
modelowanie
silnik spalinowy
diagnostyka
Opis:
The paper presents a physical model of energy related processes taking place in a diesel marine generator set. The development of a physical model was preceded by an analysis of the design structure of the investigated object and the flow of parameters among the functional modules of the model object. The above was completed by developing of functional and topological models. Only their analysis allowed the development of the proper physical model.
Źródło:
Combustion Engines; 2018, 57, 4; 10-17
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analyses of heat transfer through walls of thermal technical spaces with computer helping
Autorzy:
Janczarek, M. M.
Powiązania:
https://bibliotekanauki.pl/articles/117968.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
heat transfer
technical storages
physical modeling
control process
Opis:
The paper describes research work on methods concerning heat transfers through walls of thermal technical chambers. This paper is focused on the new concept of thermal analysis derived from harmonic character of temperature changes in building environment with aspect on conductive heat transfers through walls.. The paper presents exemplary measurement results taken in Lublin region during various periods throughout a year. The purpose for the research is to point out areas subjected to the highest energy losses caused by building’s construction and geographical orientation of walls in the aspect of daily atmospheric temperature changes emerging on chamber exterior.
Źródło:
Applied Computer Science; 2014, 10, 4; 75-83
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Behavior of helical piles - as a geoenvironmental choice - by frustum confining vessel (FCV)
Autorzy:
Khazaie, J.
Eslami, A.
Powiązania:
https://bibliotekanauki.pl/articles/102327.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
helical pile
environment
geoenvironment
frustum confining vessel (FCV)
physical modeling
bearing capacity
Opis:
Helical piles are environmental friendly and economical deep foundations that due to environmental considerations are excellent additions to the variety of deep foundation alternatives available to the practitioner. Helical piles performance depends on soil properties, the pile geometry and soil-pile interaction. Helical piles can be a proper alternative in sensitive environmental sites if their bearing capacity is sufficient to support applied loads. The failure capacity of helical piles in this study was measured via an experimental research program that carried out by Frustum Confining Vessel (FCV). FCV is a frustum chamber by approximately linear increase in vertical and lateral stresses along depth from top to bottom. Due to special geometry and applied bottom pressure, this apparatus is a proper choice to test small model piles which can simulate field stress conditions. Small scale helical piles are made with either single helix or more helixes and installed in fine grained sand with three various densities. Axial loading tests including compression and tension tests were performed to achieve pile ultimate capacity. Results indicate the helical piles behavior essentially depends on pile geometric characteristics, i.e. helix configuration and soil properties. According to the achievements, axial uplift capacity of helical model piles is about equal to usual steel model piles that have the helixes diameter. Helical pile compression bearing capacity is too sufficient to act as a medium pile, thus it can be substituted other piles in special geoenvironmental conditions. The bearing capacity also depends on spacing ratio, S/D, and helixes diameter.
Źródło:
Advances in Science and Technology. Research Journal; 2016, 10, 31; 8-22
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Block-based physical modeling with applications in musical acoustics
Autorzy:
Rabenstein, R.
Petrausch, S.
Powiązania:
https://bibliotekanauki.pl/articles/907909.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
modelowanie fizyczne
filtr cyfrowy
filtr elektryczny
synteza dźwięku
physical modeling
wave digital filters
sound synthesis
Opis:
Block-based physical modeling is a methodology for modeling physical systems with different subsystems. Each subsystem may be modeled according to a different paradigm. Connecting systems of diverse nature in the discrete-time domain requires a unified interconnection strategy. Such a strategy is provided by the well-known wave digital principle, which had been introduced initially for the design of digital filters. It serves as a starting point for the more general idea of blockbased physical modeling, where arbitrary discrete-time state space representations can communicate via wave variables. An example in musical acoustics shows the application of block-based modeling to multidimensional physical systems.
Źródło:
International Journal of Applied Mathematics and Computer Science; 2008, 18, 3; 295-305
1641-876X
2083-8492
Pojawia się w:
International Journal of Applied Mathematics and Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer Aided Thermal Processes In Technical Spaces
Autorzy:
Janczarek, M.
Bulyandra, O.
Powiązania:
https://bibliotekanauki.pl/articles/117689.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
heat transfer
thermal technical chambers
physical modeling
control process
Opis:
This paper describes research work on methods concerning heat transfers through walls of thermal technical chambers. The paper presents the mathematical and physical analysis of problems in the field of energy savings and material selection in thermal chambers in controlled gaseous environment. The purpose for the research is to point out areas subjected to the highest energy losses caused by building’s construction and geo-graphical orientation of walls in the aspect of daily atmospheric temperature changes emerging on chamber exterior. Thermal problems were solved using computer aided support. The paper presents exemplary measurement results taken in Lublin region during various periods throughout a year.
Źródło:
Applied Computer Science; 2017, 13, 2; 82-93
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental Methods of Validation for Numerical Simulation Results on Steel Flow through Tundish
Autorzy:
Pieprzyca, J.
Warzecha, P.
Merder, T.
Warzecha, M.
Powiązania:
https://bibliotekanauki.pl/articles/355968.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
continuous casting
tundish
physical modelling
numerical modeling
Opis:
The article presents experimental results on the impact of tundish flow regulator influencing the liquid steel flow course. The research was conducted based on the hybrid modelling methods understood as a complementary use of Computational Fluid Dynamics (CFD) methods and physical modelling. Dynamic development of numerical simulation techniques and accessibility to highly advanced and specialized software causes the fact that these techniques are commonly used for solving problems related to liquid flows by using analytical methods. Whereas, physical modelling is an important cognitive tool in the field of empirical identification of these phenomena. This allows for peer review and specification of the researched problems. By exploiting these relationships, a comparison of the obtained results was performed in the form of residence time distribution (RTD) curves and visualization of particular types of liquid steel flow distribution zones in the investigated tundish.
Źródło:
Archives of Metallurgy and Materials; 2016, 61, 4; 2057-2060
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fizyczne i numeryczne modelowanie wielooperacyjnego procesu kucia obudowy przegubu homokinetycznego
Physical and numerical modeling of forging process of constant velocity joint body
Autorzy:
Hawryluk, M.
Zwierzchowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/312630.pdf
Data publikacji:
2010
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
modelowanie matematyczne
modelowanie fizyczne
przegub homokinetyczny
mathematical modeling
physical modeling
CV joint body
Opis:
W artykule zaprezentowano wyniki uzyskane z modelowania fizycznego przy użyciu miękkich materiałów modelowych (syntetyczny wosk filia) dotyczące doboru materiału modelowego do rzeczywistego oraz sposobu płynięcia materiału. W pracy przedstawiono także wyniki modelowania numerycznego procesu kucia przegubów homokinetycznych za pomocą pakietu obliczeniowym sfFormingSFM.8.1 dotyczące, m. in.: rozkładu odkształceń plastycznych, prędkości odkształcenia oraz sił kucia. Do zweryfikowania modelowania numerycznego procesu kucia w oparciu o przemysłowy proces kucia wykorzystano zbudowany przez autorów system pomiarowo-archiwizujący umożliwiający rejestrację i archiwizację sił kucia na poszczególnych operacjach w funkcji i czasu.
In the paper was introduced the results from physical modeling by using soft materials relating to real the as well as flow of material the selection of model material. The article concerns numeric modeling of the multi operating process of forging the CVJB, too. The thermo-mechanical model was built with deformable tools (3D) of process by the commercial program sfFormingSFM.8.1. The first 4 operations of worm forging were analyze. In numerical modeling the schedules of plastic deformations and stress, plastic strain rate was obtained. Additionally, in aim of verification the courses of forging forces from MES were compared with forging forces in real process thanks to special measure-archives system built by authors.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2010, 11, 6
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja właściwości odkształceniowych górotworu w oparciu o numeryczną analizę wstrząsu związanego z wyburzaniem budowli
Identification of physical properties of rock mass based on the numerical analysis of tremor connected with building demolition
Autorzy:
Walaszczyk, J.
Hachaj, S.
Barnat, A.
Powiązania:
https://bibliotekanauki.pl/articles/349310.pdf
Data publikacji:
2008
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
wyburzanie budowli
modelowanie numeryczne
właściwości fizyczne
górotwór
building demolition
numerical modeling
physical properties
rock mass
Opis:
Likwidację (wyburzenia) starych konstrukcji budowlanych coraz częściej przeprowadza się metodą minerską. Wyburzane obiekty są zwykle posadowione pośród innych budowli, których konstrukcje powinny być chronione przed uszkodzeniem. Największym zagrożeniem dla chronionych obiektów są parasejsmiczne drgania wywołane wybuchem materiału kruszącego i upadkiem wyburzanej konstrukcji. Energia niesiona przez falę sejsmiczną jest przekazywana na obiekt chroniony, wprowadzając go w drgania. Parametry (widmo częstotliwościowe, widmowa gęstość mocy, maksymalne wychylenie) rzeczywistego wektora prędkości przekazanego na chroniony obiekt są przedmiotem analizy przy projektowaniu procesu wyburzeniowego. Rzadko znana jest struktura i właściwości fizyczne górotworu, na którym posadowione są chronione budynki, a właściwości te decydują o postaci propagującej fali parasejsmicznej. W łatwy sposób można zidentyfikować warstwę wierzchnią gruntu (i określić jej właściwości mechaniczne), lecz morfologia warstw głębiej zalegających (poniżej fundamentów) na ogół nie jest znana. Niniejsza praca stanowi próbę określenia właściwości fizycznych skał na podstawie porównania rejestrowanego wstrząsu towarzyszącego wyburzaniu rzeczywistej konstrukcji z wynikami uzyskanymi na modelu numerycznym zbudowanym na bazie elementów skończonych.
The following paper deals with the determination of rock physical properties based on comparison of the recorded tremor accompanying the demolition of a real building with the results from the numerical model based on the finite element method.
Źródło:
Górnictwo i Geoinżynieria; 2008, 32, 2; 307-319
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of continuous steel casting conditions on behavior and stability of liquid mold slag during slab casting - physical modeling
Wpływ warunków ciągłego odlewania stali na zachowanie i stabilność ciekłego żużla krystalizatorowego podczas odlewania wlewków płaskich - modelowanie fizyczne
Autorzy:
Bielnicki, M.
Jowsa, J.
Powiązania:
https://bibliotekanauki.pl/articles/263974.pdf
Data publikacji:
2018
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
continuous steel casting
mold
submerged entry nozzle
mold slag
physical modeling
ciągłe odlewanie stali
krystalizator
wylew zanurzeniowy
żużel krystalizatorowy
modelowanie fizyczne
Opis:
This article presents the results of the physical modeling of the continuous casting of steel slabs in a mold. The experiments focused on the assessment of the shape and stability of the liquid mold slag layer, which was reproduced in studies using silicone oil. The experimental tests were carried out for two different geometries of the submerged entry nozzle, two extreme submergence depths of the submerged entry nozzle (0.215 and 0.295 m), and two extreme casting speeds (1.0 and 1.6 m/min) used in industry. For each variant of the experiment, photographic documentation of the oil layer’s behavior was presented and discussed. The research was supplemented with a visualization of the flow structure using a marker for the selected variant of the experiment.
W artykule przedstawiono wyniki modelowania fizycznego ciągłego odlewania stalowych wlewków płaskich w krystalizatorze. Eksperymenty koncentrowały się na ocenie kształtu i stabilności warstwy ciekłego żużla krystalizatorowego, odwzorowanego w badaniach za pomocą oleju silikonowego. Badania modelowe przeprowadzono dla dwóch różnych geometrii wylewu zanurzeniowego, dwóch skrajnych głębokości zanurzenia wylewu (0,215 m i 0,295 m) oraz dwóch skrajnych prędkości odlewania (1,0 m/min i 1,6 m/min) stosowanych w przemyśle. Dla każdego wariantu eksperymentu zaprezentowano i omówiono dokumentację fotograficzną zachowania się warstwy oleju. Badania uzupełniono znacznikową wizualizacją struktury przepływu dla wybranego wariantu eksperymentu.
Źródło:
Metallurgy and Foundry Engineering; 2018, 44, 1; 17-29
1230-2325
2300-8377
Pojawia się w:
Metallurgy and Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of Dual Plug Argon Blowing for Efficient Mixing at Ladle Furnace Station
Autorzy:
Warzecha, Marek
Hutny, A.
Warzecha, P.
Kutyła, Z.
Merder, T.
Powiązania:
https://bibliotekanauki.pl/articles/2049728.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
steelmaking
ladle furnace
numerical modeling
physical modeling
Opis:
The article presents the results of model research concerning the change of technology of argon blowing into liquid steel at the ladle furnace, using the dual plug system. The results of numerical simulations were verified with experimental data carried out on the water model device. The verified model was used to perform numerical simulations to predict the impact of using a new gas injection technology - with different flow rates - on the time to achieve the assumed degree of metal chemical homogenization after alloy addition. Simulation results show that argon blowing metal bath in dual plug mode can effectively reduce mixing time compared to conventional technology with the same gas flow rates. Generally, the use of the dual plug system is beneficial for reducing the bath mixing time, however, the assumed optimal proportion of gas blown through individual plug should be followed. Finally, numerical predictions were used to perform experimental melt under industrial conditions. Industrial verification has clearly confirmed the validity of numerical modeling and showed that also in industrial conditions, a shorter time of chemical homogenization was obtained for the dual plug system.
Źródło:
Archives of Metallurgy and Materials; 2021, 66, 2; 561-572
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical and Physical Modeling of Alloy Behavior Feeding by Pulse-Step Method to Liquid Steel in One Strand Slab Tundish
Autorzy:
Cwudziński, A.
Gajda, B.
Hutny, A.
Jowsa, J.
Powiązania:
https://bibliotekanauki.pl/articles/353009.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tundish
pulse-step alloying method
liquid steel
physical trials
numerical modeling
Opis:
The main purpose of the present work was to validate the numerical model for the pulse-step liquid steel alloying method using a physical simulator that enables the observation and recording of phenomena occurring during the continuous steel casting process. The facility under investigation was a single-nozzle tundish equipped with a dam. To physical trials the glass water model was made on a scale of 2:5. For the mathematical description of turbulence during liquid steel alloying process, the k-ε and k-ω models were employed in the simulations. Based on the computer simulations and physical trials carried out, alloy addition behaviour and mixing curves for different tundish alloy addition feeding positions were obtained. The change in the location of alloy addition feeding to the liquid steel had an effect on the process of alloy addition spread in the liquid steel bulk and on the mixing time.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 4; 2081-2087
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mathematical modeling of air duct heater using the finite difference method
Autorzy:
Sarafraz M., M.
Peyghambarzadeh S., M.
Marahel, A.
Powiązania:
https://bibliotekanauki.pl/articles/779839.pdf
Data publikacji:
2011
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
nagrzewnica kanałowa
modelowanie
zmienne właściwości fizyczne
różnice skończone
logarytm średniej temperatury
duct heater
modeling
variable physical properties
finite differences
log mean temperature difference
Opis:
In this research, mathematical modeling of a duct heater has been performed using energy conservation law, Stefan-Boltzman law in thermal radiation, Fourier’s law in conduction heat transfer, and Newton’s law of cooling in convection heat transfer. The duct was divided to some elements with equal length. Each element has been studied separately and air physical properties in each element have been used based on its temperature. The derived equations have been solved using the finite difference method and consequently air temperature, internal and external temperatures of the wall, internal and external convection heat transfer coeffi cients, and the quantity of heat transferred have been calculated in each element and effects of the variation of heat transfer parameters have been surveyed. The results of modelling presented in this paper can be used for the design and optimization of heat exchangers.
Źródło:
Polish Journal of Chemical Technology; 2011, 13, 4; 47-52
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodika sozdaniâ matematičeskoj modeli ènergetičeskoj sostavlâûŝej himiko-fizičeskih processov, kotorye proishodât v drevesine pri ee nagrevanii do načala fazy plamennogo goreniâ
Methods of Creating a Mathematical Model of an Energy Component of Chemical and Physical Processes that Occur in Wood When It Is Heated Prior To the Flaming Phase
Metodyka opracowania modelu matematycznego składnika energetycznego procesów chemiczno-fizycznych, które zachodzą w drewnie podczas jego nagrzewania do momentu nastąpienia spalania płomieniowego
Autorzy:
Chumachenko, S. N.
Zhartovskyi, S. V.
Titenko, A. N.
Powiązania:
https://bibliotekanauki.pl/articles/373451.pdf
Data publikacji:
2016
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
wood protected against inflammation
flaming phase
flame retardants
mathematical modeling
chemical processes
physical processes
drewno chronione przed zapaleniem
spalanie płomieniowe
antypireny
modelowanie matematyczne
procesy chemiczno-fizyczne
Opis:
Aim: The purpose of this article is to create a method of mathematical modeling of an energy component of chemical and physical processes that occur in wood when it is heated prior to the flaming phase. This method will make it possible to determine the impact of using flame retardants in the surface layers of wooden building constructions on the processes of wood inflammation. Methodology: Using experimental data regarding the development in time of chemical and physical processes (derivatograms and data of gas chromatographic analysis of sample material during thermal degradation) that occur during heating of wood prior to its ignition, approximation formulas were obtained. These formulas describe the relationship between the amount of substance emitted in the thermolysis process. Based on the obtained data, we then obtain dependencies between the desired stored energy which is released during the formation of each substance (as a result of heating wood samples) and the temperature, as well as the accumulated total desired energy. Subsequently the required cumulative energy of all components and their transformations is determined, taking into account the absorption and release of energy generated by the temperature. Introduced is the concept of effective heat capacity of the transformation process of a sample piece of wood (within the temperature range of this study) including all the components and their structural transformations that occur during the heating process. Then a one-dimensional problem is solved of heat spread in an isotropic solid, taking into account a variable, effective heat capacity that depends on temperature. Formulas were obtained for the elementary volume, placed directly on the surface of the wood sample, as well as inside it and in the back. Results: Using the presented methodology we obtain a mathematical model of an energy component of chemical and physical processes that take place in a sample of pine wood (10 mm thick, density 400-550 kg/m3), when it is heated prior to the flaming phase. Conclusions: The presented method presents the ability to predict the required amount of flame retardants (for a variety of fire-retardant impregnating compositions) to be entered into the outer layers of wood (different species, thickness, density, quality of surface treatment, etc.) to ensure the extension of the time period from the heat exposure point until the ignition point.
Cel: Celem pracy jest opracowanie metodyki modelowania matematycznego składnika energetycznego procesów chemiczno-fizycznych, które zachodzą w drewnie podczas jego nagrzewania przed nastąpieniem fazy spalania płomieniowego. Metodyka ta pozwoli określać wpływ zastosowania antypirenów w warstwie powierzchniowej drewnianych obiektów budowlanych na inhibicję procesów zapłonu drewna. Metodologia: Wykorzystując dane eksperymentalne na temat rozwoju w czasie procesów chemiczno-fizycznych (dane z termogramów i analizy chromatografii gazowej degradacji termicznej próbki materiału), które zachodzą podczas nagrzewania drewna do momentu jego zapłonu, otrzymano wzory aproksymacji, opisujące zależności między ilością substancji wydzielających się w procesie termolizy. Na podstawie określonych danych następnie otrzymywane są zależności między nagromadzoną poszukiwaną energią, która wydziela się przy powstawaniu każdej substancji (wskutek nagrzewania próbki drewna) a temperaturą, oraz ogólna wartość wydzielanej zgromadzonej energii. Następnie określa się zgromadzoną poszukiwaną energię wszystkich składników i ich przemiany/transmutacji, z uwzględnieniem pochłaniania i wydzielenia energii wytwarzanej przez temperaturę. Wprowadza się pojęcie poszukiwanej efektywnej pojemności cieplnej procesu transmutacji próbki drewna (w zakresach temperatury objętych badaniem) z uwzględnieniem wszystkich składników i zmian zachodzących w ich strukturze podczas nagrzewania. Rozwiązano jednomiarowe zadanie rozprzestrzeniania ciepła w izotropowym ciele stałym, uwzględniające zmienną, zależną od temperatury pojemność cieplną. Otrzymano równania dla objętości elementarnej, bezpośrednio na powierzchni próbki drewna, w środku próbki i z tyłu. Wyniki: Wykorzystując przedstawioną metodykę, opracowano model matematyczny składnika energetycznego procesów chemicznofizycznych, które zachodzą w drewnie sosny o grubości 10 mm, gęstości 400-550 kg/m3, podczas jego nagrzewania do nastąpienia fazy spalania płomieniowego. Wnioski: Przestawiona metodyka ukazuje możliwość prognozy potrzebnej ilości antypirenów (dla różnych ogniochronnych środków impregnacyjnych), które należy wprowadzić do warstw zewnętrznych drewna (różnego gatunku, grubości, gęstości, jakości obróbki powierzchniowej itd.) w celu wydłużenia czasu od momentu rozpoczęcia oddziaływania cieplnego do momentu zapłonu.
Źródło:
Bezpieczeństwo i Technika Pożarnicza; 2016, 44, 4; 131-137
1895-8443
Pojawia się w:
Bezpieczeństwo i Technika Pożarnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelowanie fizyczne mieszania ciekłej stali gazami obojętnymi w trójwylewowej kadzi pośredniej urządzenia COS
Physical modelling of inert gas stirring of liquid steel in three-outlet tundish of continuous casting machine
Autorzy:
Kania, H.
Pieprzyca, J.
Powiązania:
https://bibliotekanauki.pl/articles/181622.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Metalurgii Żelaza im. Stanisława Staszica
Tematy:
modelowanie fizyczne
COS
kadź pośrednia
kształtki gazo przepuszczalne
physical modeling
continuous casting machine
tundish
gas-permeable fittings
Opis:
Artykuł poświęcony jest zagadnieniu regulacji przepływu stali za pomocą kształtek gazoprzepuszczalnych zabudowanych w trójwylewowej kadzi pośredniej o pojemności nominalnej 10 t. Model kadzi pośredniej do badań symulacyjnych został zaprojektowany i wykonany w skali liniowej 1:2 na podstawie dokumentacji technicznej przemysłowego urządzenia COS. Asymetryczna budowa przemysłowej kadzi pośredniej jest powodem powstawania niekorzystnych warunków hydrodynamicznych przepływu, co skutkuje brakiem jednorodności stali na poszczególnych żyłach. Prowadzone w ramach projektu rozwojowego badania modelowania fizycznego nad optymalizacją przepływu stali w korytowej kadzi pośredniej, mogą przyczynić się do rozwiązania zaistniałego problemu, ponieważ dzięki odpowiedniemu usytuowaniu kształtek gazoprzepuszczalnych, uzyskać można właściwą homogenizację ciekłej stali w kadzi pośredniej zarówno pod względem temperaturowym jak i chemicznym.
This article is dedicated to the issue of steel flow regulation using gas-permeable fittings installed in a three-outlet tundish with nominal capacity of 10 t. The tundish model for simulation investigations was designed and made in line scale of 1:2, based on technical documentation of the industrial continuous casting machine. The asymmetrical design of the industrial tundish is the reason for unfavourable hydrodynamic conditions of fl ow, which results in lack of steel homogeneity in individual strands. The physical modelling research on optimisation of steel flow in a trough tundish carried out as a part of the developmental project may contribute to solving this problem, as the appropriate location of gas-permeable fittings allows obtaining correct homogenisation of liquid steel in a tundish in terms of both temperature and chemical features.
Źródło:
Prace Instytutu Metalurgii Żelaza; 2012, T. 64, nr 2, 2; 8-13
0137-9941
Pojawia się w:
Prace Instytutu Metalurgii Żelaza
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies