Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "performance properties" wg kryterium: Temat


Tytuł:
The Effect of Different Copper Salts on the Mechanical and Ballistic Characteristics of Double Base Rocket Propellants
Autorzy:
Abdel-Ghani, N.
Elbeih, A.
Helal, F.
Powiązania:
https://bibliotekanauki.pl/articles/357974.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
double base rocket propellant
burning rate modifiers
ballistic performance
mechanical properties
Opis:
This paper discusses the enhancement in the ballistic performance of double base rocket propellants (DBRPs) by the addition of different copper salts vs lead salts as burning rate modifiers through stable combustion and the formation of a plateau region in the low pressure region. Compositions based on DBRPs containing different percentages of lead stearate and different types of copper salts were prepared and studied. For comparison, a conventional DBRP was studied. The ignition temperature and heat of combustion were determined experimentally, and the mechanical properties were measured and evaluated. The performance in terms of ballistic characteristics (burning rate, operating pressure) were measured at different throat diameters (8, 8.5, 9, 9.5 mm) and at different temperatures (−20 and 50 °C). Specific impulses were calculated using the ICT thermodynamic code. The experimental data from the proportional study indicate that the compositions containing the studied burning rate modifiers are superior to the original DBRP in respect of ballistic performance and mechanical properties.
Źródło:
Central European Journal of Energetic Materials; 2016, 13, 2; 469-482
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of properties of marine Diesel engines run on two kinds of fuel using performance indicators
Porównanie właściwości silników okrętowych zasilanych dwoma rodzajami paliwa z wykorzystaniem wskaźników efektywności
Autorzy:
Adamkiewicz, A.
Deska, P.
Powiązania:
https://bibliotekanauki.pl/articles/360771.pdf
Data publikacji:
2011
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
wskaźniki efektywności
właściwości
morski silnik Diesla
układ napędowy
gazowiec
key performance indicators
properties
marine diesel engine
ship propulsion system
gas carrier
Opis:
Basing on the evolution of application of different kinds of fuel supplying main engines of gas carriers, this article justifies the need to compare the qualities of these engines. Mass-size, energy and energy-ecological effectiveness indicators have been defined. Properties of self-ignition engines run on one or two kinds of fuel have been considered. Values of key performance indicators have been estimated. On the basis of the identified sets of indicators, comparative analysis of a dual fuel engine with single fuel ones has been carried out.
Posługując się ewolucją zastosowania różnych rodzajów paliw zasilających silniki główne gazowców, w artykule uzasadniono potrzebę konfrontacji cech tych silników. Zdefiniowano wskaźniki efektywności masowo-gabarytowe, energetyczne i energetyczno-ekologiczne. Rozpatrzono cechy silników o zapłonie samoczynnym zasilanych jednym i dwoma rodzajami paliw. Oszacowano wartości kluczowych wskaźników efektywności. W oparciu o zidentyfikowane zbiory wskaźników przeprowadzono analizę porównawczą cech silnika dwupaliwowego z jednopaliwowymi.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2011, 28 (100) z. 1; 5-13
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of Hybrid Yarn with the Combination of Fiber and Filaments and Its Effect on the Denim Fabric Performance
Autorzy:
Babaarslan, Osman
Shahid, Md Abul
Doğan, Fatma B.
Powiązania:
https://bibliotekanauki.pl/articles/24200938.pdf
Data publikacji:
2023
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
dual core-spun yarn
elastane
filament yarn
yarn properties
denim fabric performance
Opis:
Consumer choice and behavior are changing and focusing on comfortable clothing along with fitting. Elastic yarn or fabric is necessary to achieve this comfortableness. By making elastic yarn and using elastic material in fabric production, elastic cloths are produced with proper stretchability and recovery. For that, core-spun yarn was used, but due to a lack of recovery performance, dual core-spun yarn has been developed. Different elastane ratios, linear density, and filaments were used in the dual core-spun yarn according to achieve desired stretchability. In this study, denim fabric performances were evaluated by designing different composite/hybrid dual core-spun yarn with a combination of cotton fiber and filaments. Different elastane linear densities with different filaments, PET/PTT, PTT, and PET, were used, and it was found that using finer elastane in dual core-spun yarn, strength, and unevenness are increased, and elongation decreased. Using PET/PTT filament increases hairiness, and using PTT filament increases elongation. For fabrics, coarser elastane in the dual core-spun yarns has higher stiffness, elasticity, and shrinkage. Fabric with PTT showed higher weight change and stiffness, whereas PET filament-based fabric samples have good strength and low stiffness. In addition, a multiple regression analysis was carried out for yarn and fabric properties, and mathematical models were developed.
Źródło:
Fibres & Textiles in Eastern Europe; 2023, 31, 1; 25--37
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance study of low environmental impact mortars based on mineral additions and cement resistant to sulfate (CRS)
Autorzy:
Belagraa, L.
Bouzid, A.
Powiązania:
https://bibliotekanauki.pl/articles/88980.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
cement resistant to sulphate
CRS
pozzolan
environmental performance mortars
mechanical development
physical-chemical properties
Opis:
The use of cement resistance to sulphate in aggressive environments showed a lot of benefits such us good mechanical development and therefore better durability; however, the consumption for great amount of clinker lead to random hazardous deposits, shortage of natural resources, gas and dust emissions mainly (CO2) causing negative impact on the environment. Recently, technical, economic and environmental benefits by the use of blended cements have been reported and being considered as a research area of great interest in cement production industry. The present research aim is to evaluate the effect of partial replacements of cement resistant to sulfate (CRS) by a pozzolanic addition, on the physical-chemical properties, as an alternative novel composition binder. Furthermore, the behaviour of the mortars based on this new combined blends was investigated in the study program, including chemical composition, density and fineness, consistency, setting time, swelling, shrinkage, absorption and mechanical behaviour. The results obtained showed that the substitution of pozzolan at the optimal ratio of 5% had a positive effect on the resulting cement properties, namely: greater specific surface area, reduced water demand, accelerated process of hydration, better mechanical behaviour and decreased water absorption. Therefore, economic and ecological cement based on mineral addition like pozzolan could be possible as well as advantageous to the formulation of environmental performance mortars.
Źródło:
Mining Science; 2016, 23; 65-76
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance test of network devices
Autorzy:
Bolanowski, M.
Paszkiewicz, A.
Powiązania:
https://bibliotekanauki.pl/articles/106307.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:
network devices
performance test
network traffic
statistical properties
q-additivity of traffic flows
Opis:
Selection of components in contemporary computer networks is extremely important, not only because of the project budget but also because of the network performance. Therefore, it is necessary to perform tests before deploying devices. In this paper the authors show that the performance of test network devices is dependent on the nature of network traffic including its statistical properties. Also a new hybrid model of the system for testing the network device based on the q-additivity of traffic flows was proposed.
Źródło:
Annales Universitatis Mariae Curie-Skłodowska. Sectio AI, Informatica; 2013, 13, 1; 29-36
1732-1360
2083-3628
Pojawia się w:
Annales Universitatis Mariae Curie-Skłodowska. Sectio AI, Informatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczne próby morskie uwzględniające właściwości morskie statku
Numerical Sea Tests Simulation of Seakeeping Properties
Autorzy:
Cepowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/360187.pdf
Data publikacji:
2004
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
właściwości morskie
efektywność operacyjna
kołysania boczne
kryteria stateczności
kryteria operacyjno-ograniczające
wskaźnik efektywności operacyjnej
EXPLO-SHIP 2004
seakeeping properties
seakeeping operability
roll
stability criteria
seakeeping criteria
seakeeping performance index
Opis:
Przedstawiono metodę oceny stateczności statku, umożliwiającą uwzględnienie zachowania się statku na fali. Istotą metody jest ocena zachowania się statku poddanego tzw. numerycznym próbom morskim. W artykule podano przykład metody uwzględniającej właściwości morskie statku i na tej podstawie opracowano wskazówki do zastosowania tych właściwości w kryterium stateczności poprzecznej.
The paper presents a method for the stability assessment taking into account ship behavior in waves. The m the method aims at examining ship seakeeping ability by the numerical sea test simulation in real-life operation scenarios. The article presents an application of the method for seakeeping analysis which served as a basis for stability criterion formulation.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2004, 2 (74); 67-77
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative Analysis of the Bursting Strength of Knitted Sandwich Fabrics
Analiza porównawcza wytrzymałości na rozerwanie dzianin warstwowych
Autorzy:
Ciobanu, A. R.
Ciobanu, L.
Dumitras, C.
Sârghie, B.
Powiązania:
https://bibliotekanauki.pl/articles/231516.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
mechanical properties
weft knitted sandwich fabrics
reinforcing yarns
high performance
natural yarns
właściwości mechaniczne
wątkowe dzianiny warstwowe
przędza wzmacniająca
wysoka wydajność
przędza naturalna
Opis:
This study presents the mechanical properties of weft knitted sandwich fabrics (bursting strength) and the effect of the raw materials used. Two types of fabrics, with and without reinforcing yarns, were analyzed. To determine the influence of the raw material type, a combination of three structure variants were obtained by changing the position in the structure architecture of two types of raw material: Kevlar® and linen yarns. Each of these variants was studied at three levels of density, given by the position of the quality cam, in order to determine the influence of this parameter. Tests were organized in two stages: the first concerned the bursting behavior of single layer fabrics, and the second considered the study of more layers of sandwich fabrics with different orientation. Satisfactory results were obtained after this study regarding the possibility of replacing the high-performance yarns with natural ones.
Praca przedstawia właściwości mechaniczne wątkowych dzianin warstwowych, w tym wpływ stosowanego surowca na wytrzymałość na zerwanie. Dla stwierdzenia wpływu stosowanego materiału wyprodukowano 3 warianty strukturalne zmieniając strukturę warstw wykonanych z Kevlaru i włókien lnianych. Każdy z wariantów był badany przy 3 rożnych wartościach gęstości poprzez zmianę pozycji krzywki w celu określenia wpływu na badane parametry. Testy przeprowadzono w dwóch stopniach. Pierwszy uwzględniał badanie wytrzymałości na zerwanie dzianin jednowarstwowych, drugi uwzględniał udział większej ilości warstw wielowarstwowej struktury dzianiny przy rożnej orientacji. Uzyskano zadowalające wyniki uwzględniające możliwość zastąpienia wysokowytrzymałych przędz poprzez przędze surowców naturalnych.
Źródło:
Fibres & Textiles in Eastern Europe; 2016, 2 (116); 95-101
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effects of Heat Treatment on the Mechanical and Thermal Performance of Fabric Used in Firefighter Protective Clothing
Wpływ obróbki termicznej na właściwości mechaniczne i barierowe materiałów stosowanych w odzieży ochronnej strażaków
Autorzy:
Cui, Z
Ma, C
Lv, N
Powiązania:
https://bibliotekanauki.pl/articles/231712.pdf
Data publikacji:
2015
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
heat treatment
X-fiper® fabric
thermal protective performance
mechanical properties
obróbka cieplna
X-fiper® tkanina
odporność i stabilność termiczna
właściwości mechaniczne
Opis:
With excellent thermal stability and resistance, X-fiper® fabric has been applied in firefighter protective clothing. In this paper, X-fiper® fabric was subjected to heat treatment at 6.5 kW/m2 and 9.7 kW/m2 for durations between 0 to 30 min. Effects of the heat intensity and exposure duration on mechanical properties, thermal protective performance, surface morphology, and structural properties were studied and analysed. The results showed that the intensity of heat flux had significant effects on the tensile strength, elongation at break, and tear strength. The tear strength of X-fiper® fabric was less than 100 N after 5-minute’s exposure at 300 °C. The thermal protective performance, however, did not change considerably. From the scanning electron microscope (SEM) analysis, specimens showed grooves, peel-offs and deposits as a result of heat treatment. The results observed by SEM and FTIR-Raman spectroscopy revealed the mechanisms of changes in mechanical properties and thermal protection.
W odzieży ochronnej strażaków zastosowano tkaninę X-fiper®, która charakteryzuje się doskonałą odpornością i stabilnością termiczną. W prezentowanej pracy tkaninę tę poddano działaniu energii cieplnej 6,5 kW/m2 i 9,7 kW/m2, w czasie od 0 do 30 min. Badano i analizowano wpływ intensywności i czasu trwania ekspozycji cieplnej na właściwości mechaniczne, zdolność ochrony przed efektem cieplnym, morfologię powierzchni i właściwości strukturalne. Wyniki pokazują, że intensywność strumienia ciepła ma znaczący wpływ na wytrzymałość na rozciąganie, wydłużenie przy zerwaniu i wytrzymałość na rozrywanie. Wytrzymałość na rozrywanie tkaniny była mniejsza niż 100N po 5 minutach ekspozycji w temperaturze 300 °C. Jednakże, zdolność ochrony przed efektem cieplnym nie zmieniła się znacząco. Na zdjęciach SEM powierzchni próbek widoczny jest peeling i bruzdy oraz inne zmiany strukturalne. Wyniki obserwacji SEM i spektroskopii FTIR-Ramana pozwalają na określenie mechanizmu zmian właściwości mechanicznych i termicznych próbek.
Źródło:
Fibres & Textiles in Eastern Europe; 2015, 2 (110); 74-78
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The composting of PLA/HNT biodegradable composites as an eco-approach to the sustainability
Autorzy:
Czarnecka-Komorowska, Dorota
Bryll, Katarzyna
Kostecka, Ewelina
Tomasik, Malgorzata
Piesowicz, Elżbieta
Gawdzińska, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2173590.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
polymer composite materials
PMC
biocomposites
polylactic acid
PLA
halloysite
composting process
performance properties
polimerowe materiały kompozytowe
kwas polimlekowy
biokompozyty
proces kompostowania
właściwości użytkowe
haloizyt
Opis:
The article presents the results of the research related to the decomposition of polylactic acid (PLA)/halloysite nanotube (HNTs) biocomposites into a simple organic form. After manufacturing the nanocomposites, the evaluation of the composting process simulation was conducted using the biodegradation method. First, the selected properties of PLA/HNTs biocomposites, such as density, water absorption, and impact strength were tested. Next, the impact of the composting process on the behavior of PLA/HNTs composites was investigated from 30 to 90 days. Finally, the loss of mass of the composites, hardness, and the structural changes of biocomposites under the composting conditions before and after the composting were evaluated using SEM microscopy. The results showed that the PLA modified by HNT particles has biodegradation-friendly properties and therein is fully suitable for organic recycling. Due to this, in the coming years, it may contribute to the replacement of non-biodegradability polymers, i.e. polyolefins and polyesters, and reduction of plastic packaging wastes.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 2; art. no. e136720
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The composting of PLA/HNT biodegradable composites as an eco-approach to the sustainability
Autorzy:
Czarnecka-Komorowska, Dorota
Bryll, Katarzyna
Kostecka, Ewelina
Tomasik, Malgorzata
Piesowicz, Elżbieta
Gawdzińska, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/2090722.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
polymer composite materials
PMC
biocomposites
polylactic acid
PLA
halloysite
composting process
performance properties
polimerowe materiały kompozytowe
kwas polimlekowy
biokompozyty
proces kompostowania
właściwości użytkowe
haloizyt
Opis:
The article presents the results of the research related to the decomposition of polylactic acid (PLA)/halloysite nanotube (HNTs) biocomposites into a simple organic form. After manufacturing the nanocomposites, the evaluation of the composting process simulation was conducted using the biodegradation method. First, the selected properties of PLA/HNTs biocomposites, such as density, water absorption, and impact strength were tested. Next, the impact of the composting process on the behavior of PLA/HNTs composites was investigated from 30 to 90 days. Finally, the loss of mass of the composites, hardness, and the structural changes of biocomposites under the composting conditions before and after the composting were evaluated using SEM microscopy. The results showed that the PLA modified by HNT particles has biodegradation-friendly properties and therein is fully suitable for organic recycling. Due to this, in the coming years, it may contribute to the replacement of non-biodegradability polymers, i.e. polyolefins and polyesters, and reduction of plastic packaging wastes.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2021, 69, 2; e136720, 1--13
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of Mechanical Properties of Woven Fabrics by ANN
Autorzy:
Elkateb, Sherien N.
Powiązania:
https://bibliotekanauki.pl/articles/2171977.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
ANN
artificial neural network
mechanical properties
prediction performance
modelling
woven fabric
Opis:
This study aims to obtain an accurate prediction model of mechanical properties of woven fabric to achieve customer satisfaction. Samples of plain woven fabric were produced from different yarn counts and blend ratios of cotton and polyester of weft yarn at different weft densities. Mechanical properties such as tensile strength, bending stiffness and elongation% in both the warp and weft directions were tested. The prediction model was based on Artificial Neural Networks (ANNs). For each model, thirty-nine samples were used for training and fifteen for testing prediction performance. Findings indicated that the ANN achieved a perfect performance in predicting all properties.
Źródło:
Fibres & Textiles in Eastern Europe; 2022, 4 (151); 54--59
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Certain Ballistic Performance and Thermal Properties Evaluation for Extruded Modified Double-base Propellants
Autorzy:
Fahd, A.
Mostafa, H. E.
Elbasuney, S.
Powiązania:
https://bibliotekanauki.pl/articles/358144.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
solid propellant
modified double-base propellant
combustion
burning rate
ballistic performance
thermal properties
Opis:
The main advantages of modified double-base (MDB) propellants are wide range of burning rates, high energy output, as well as enhanced thrust. This study reports on the effect of potential oxidizers − potassium perchlorate (KP) or ammonium perchlorate (AP), stoichiometric binary mixture of the oxidizer (KP or AP) with metal fuel (Al), and energetic nitramine (HMX) on combustion characteristics of MDB propellants. MDB propellant formulations based on these additives, constituting 10 wt.% of total mass of the MDB formulation, were manufactured by solventless extrusion process. The impact of these additives on ballistic performance particularly the burning rate as well as on the characteristic exhaust velocity of gaseous product (C*), was evaluated using small-scale ballistic evaluation test motor. KP and AP exhibit different effects; KP positively impacts the burning rate, AP positively impacts C*. Stoichiometric binary mixture of AP/Al positively impacts both the burning rate and C*; HMX substantially enhances C*. These energetic additives could alter the combustion mechanism, by thinning the induction zone, allowing the luminous flame zone to be more adjacent to the burning surface. Therefore, the combustion reaction could proceed faster. The developed MDB propellant formulations were found to be more energetic with an increase in calorific value in comparison to reference formulation (using bomb calorimeter); they exhibited similar ignition temperature by means of cook off test. DSC measurements demonstrated similar onset and maximum decomposition temperature of developed MDB propellant formulations to reference DB propellant formulation but with an increase in total heat released (J/g).
Źródło:
Central European Journal of Energetic Materials; 2017, 14, 3; 621-635
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustability of building products versus fire safety
Autorzy:
Fangrat, J.
Powiązania:
https://bibliotekanauki.pl/articles/200506.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
building performance
buildings fire safety
building products
fire properties
Euroclass
wydajność budowy
bezpieczeństwo pożarowe
wyroby budowlane
Euroklasa
Opis:
The combustion process is described and analysed based on the experimental results in the context of building fire safety. Data are obtained by means of five standard methods: ISO 5657 ignitability test, ISO 5657 cone calorimeter, ISO 9705 room corner test, EN ISO 1716 small calorimeter, and EN ISO 1182 small furnace. Various categories of building products were tested: cellulose based products (particle boards, plywoods), solid wood, floor coverings, concrete, ceramics, insulations (thermal and/or acoustic), boards (wall/ceiling), mortars, adhesives, and thin coatings. The studied products exhibited very different fire properties from non-combustible to easily combustible. In order to more effectively differentiate non-combustibles and combustibles within building products, the modified heat of combustion was calculated using all test results according to EN ISO 1716 and EN ISO 1182. The revision of criteria for Euro class A1 and A2 is proposed to obtain more realistic reaction-to-fire evaluation. In conclusion, it is advised to use single limit for heat of combustion for A1 and A2 Euro class. The proposed approach for modified heat of combustion is a convenient tool for the fast and cost-effective initial test method for non-combustibility evaluation and seems to be the proper method for distinguishing between non-combustibles and combustibles within building products. It is a better reflection of the real physical process of combustion than the current one. The third A1 criterion is questionable, regarding time to auto-ignition in EN ISO 1182 cylindrical furnace. The measurement for gross heat of combustion by EN ISO 1716 method is proposed for all Euro classes of building products with different limit values.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2016, 64, 4; 709-717
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wpływu rodzaju ubioru na jego właściwości ochronne
Study on Influence of the Firefighter Clothing Structure on its Protective Performance
Autorzy:
Furmański, P.
Łapka, P.
Powiązania:
https://bibliotekanauki.pl/articles/136286.pdf
Data publikacji:
2016
Wydawca:
Szkoła Główna Służby Pożarniczej
Tematy:
ubranie ochronne
właściwości warstw
symulacja numeryczna
ocena cech ochronnych
firefighters clothing
layers properties
numerical simulation
protective performance
Opis:
W artykule omówiono kryteria oceny właściwości ochronnych ubiorów strażackich oparte o przewidywany stopień oparzenia i wykorzystanie temperatury powierzchniowych warstw skóry. Przedstawiono metody oceny tych właściwości bazujące na pomiarach temperatury przeprowadzanych na manekinach i specjalnie zaprojektowanych stanowiskach pomiarowych wykorzystujących próbki ubiorów ochronnych. Szczególną uwagę zwrócono na metodę opartą o symulację numeryczna procesów wymiany ciepła i wilgoci w ubiorach ochronnych warstwach powietrznych oddzielających jego poszczególne warstwy oraz w skórze. Omówiono zalety i wady zarówno metod eksperymentalnych, jak i teoretycznej oceny właściwości ochronnych ubioru. Krótko streszczono rodzaje materiałów stosowanych na warstwy ubioru ochronnego i ich właściwości cieplne, radiacyjne i dyfuzyjne. Na podstawie symulacji numerycznej różnych sposobów wymiany ciepła w ubiorze ochronnym wykazano, że największą rolę odgrywa w niej przewodzenie ciepła i promieniowanie cieplne. Przeprowadzano symulacje numeryczne przepływu ciepła przez trzy ubiory ochronne wykonane z warstw różnych materiałów. Wykazano, że ubiory te różnią się, przy zadanym obciążeniu cieplnym, zarówno przewidywanym wzrostem temperatury przypowierzchniowych warstw skóry jak stopniem oparzenia. Zbadano również wpływ grubości szczelin powietrznych między warstwami ubioru oraz między wewnętrzną powierzchnią ubioru i skórą wykazując istotny wpływ tej ostatniej szczeliny na przewidywany stopień oparzenia.
Criteria for evaluation of protective properties of firefighters clothing were presented in the paper. They were based on a degree of predicted skin burns and determination of temperature of the skin surface layers. Methods of the skin temperature measurements using mannequins and specially designed experimental stands containing samples of the protective clothing were described. Special attention was directed toward numerical simulation of heat and moisture transfer across layers of the protective clothing as well as via the air spaces separating them and the human skin. Advantages and disadvantages of the experimental and theoretical methods were briefly discussed. Types of textiles used for the separate layers of the protective clothing together with their thermal radiative and diffusive properties were presented. Numerical simulations indicate that heat conduction and thermal radiation play the most important role in heat transfer across the protective clothing. The numerical simulations were also carried out for three kinds of the protective clothing made from layers of different textiles. It was shown that these clothing differ in the predicted skin temperature values and burn degree for the same thermal load applied. Effect of changing thickness of the air spaces between textile layers and the skin on the burn degree was also studied. It was proved that the latter air space exerts significant influence on the predicted burn degree.
Źródło:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej; 2016, 2, 58; 207-230
0239-5223
Pojawia się w:
Zeszyty Naukowe SGSP / Szkoła Główna Służby Pożarniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Sportswear Fabric Properties on the Health and Performance of Athletes
Wpływ właściwości materiałów używanych do produkcji ubiorów sportowych na zdrowie i wydajności sportowców
Autorzy:
Hassan, M.
Qashqary, K.
Hassan, H. A.
Shady, E.
Alansary, M.
Powiązania:
https://bibliotekanauki.pl/articles/232509.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
sportowa tkanina
fizjologiczne reakcje sportowców
wydajność sportowców
właściwości materiałów
przepuszczalność pary wodnej
właściwości ubioru a wydolność organizmu
sportswear fabrics
comfort properties
athletes' physiological responses
performance of athlets
Opis:
The main goal of this work was to study the Influence of sportswear fabric properties on the physiological responses and performance of athletes. The influence of three different types of sportswear fabrics on the physiological response and performance of volunteers in sports conditions was investigated. The fabrics and garments tested were made of 100% cotton, a 65/35 polyester/cotton blend and 100% polyester fibres. Seven volunteer were selected to wear the sportswear during the physical exercise assigned and their physiological responses were tested. The results of the study show a statistically significant effect on the athletes' physiological responses and performance parameters measured for the different types of sportswear tested. The sample with 100% polyester produced the best physiological responses and performance from the athletes. This effect can be related to better moisture management, which reflects the amount of relative water vapour permeability (68%) and lower thermal conductivity. This will enhance the body's temperature regulation leading to increase athletes' cardiorespiratory fitness and performance. The results also show the high correlation between the sportswear fabrics properties and athletes' physiological responses and performance, except the relationship between the end-tidal partial pressure of oxygen (PETO2) and fabric thickness (h), air permeability (AP) and thermal resistance (r), which are not highly correlated. The other correlation values vary between (š0.62 and (š1).
Badano właściwości ubiorów sportowych na fizjologiczną odpowiedź oraz wytrzymałość organizmu. Przebadano trzy rożne rodzaje ubiorów wykonanych z 100% bawełny, mieszanki 65/35 poliester/bawełna oraz 100% poliestru. Wytypowano 7 ochotników, którzy w przygotowanych ubiorach wykonywali zaprogramowane ćwiczenia a następnie poddano ich badaniom. Wyniki opracowano statystycznie i wykazano, że najkorzystniejsze właściwości posiada odzież wykonana ze 100% poliestru. Wynik ten można tłumaczyć lepszymi właściwościami transportu wilgoci wynikającymi z poziomu przepuszczalności pary wodnej i niższą przewodnością termiczną. Właściwości te wpływają na zachowanie się organizmu a zwłaszcza na sprawność układu krążeniowo-oddechowego, a tym samym wydolność organizmu. Wykazano korelację pomiędzy właściwościami ubioru a wydolnością organizmu za wyjątkiem korelacji pomiędzy grubością materiału a wydechowym cieśnieniem parcjalnym tlenu (PETO2) oraz przepuszczalnością powietrza i opornością cieplną.
Źródło:
Fibres & Textiles in Eastern Europe; 2012, 4 (93); 82-88
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies