Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "out-of-plane" wg kryterium: Temat


Wyświetlanie 1-6 z 6
Tytuł:
Numerical and experimental analysis of orthopedic brace for treatment of idiopathic scoliosis
Autorzy:
Grycuk, Sławomir
Mrozek, Piotr
Powiązania:
https://bibliotekanauki.pl/chapters/2215316.pdf
Data publikacji:
2022
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
brace
FEM
ESPI
out of plane displacement
Opis:
The main objective of the work presented in this chapter is to identify the working scheme of the brace’s structure, subsequently enabling identification of the possibilities of potential brace design optimization. This chapter presents the results of numerical simulations concerning a Boston-type orthopedic brace with the use of the finite element method (FEM) in the Ansys Workbench environment. Reverse engineering methodology was employed to develop the geometric model, based on the results of digitization performed by an optical 3D scanner. To experimentally verify the FEM model, a test stand for measurement of the brace’s field of displacements, equipped with a laser electronic speckle pattern interferometer (ESPI), was used. Special attention was paid to representing the loads and boundary conditions of numerical simulations in experimental tests. Ultimately, the relative difference between numerical and experimental results in displacements in the central part of the brace’s front wall did not exceed 0.9%. The force flow trajectories characteristic of the brace’s shell were determined using the experimentally confirmed FEM model, revealing the overall way of its operation. The main areas of the brace carrying loads correcting the spine and sites performing little effort, from the perspective of their participation in the brace’s fundamental therapeutic application, were identified. The conducted analysis is universal in nature and can be adapted to other types of orthopedic braces. The results obtained allow for the proposal of methods for mechanical optimization of the brace’s design.
Źródło:
Advances in biomedical engineering; 15-30
9788367185400
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study on compression properties of semi-reentrant filled tubular structures
Autorzy:
Wu, Dongquan
Li, Dinghe
Zhang, Zhiqiang
Chen, Jianguo
Powiązania:
https://bibliotekanauki.pl/articles/2200883.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
semi-reentrant (SR) structure
tubular fillers
out-of-plane
in-plane compression
Opis:
In this study, a semi-reentrant structure (SR) filled with different tubular structures, includ- ing tube, triangular and rectangle structures were designed. The tubular structures were perfectly assembled into semi-reentrant cells to avoid swaying in the semi-reentrant cell. The geometric relations and relative density for these structures were established. For the out-of-plane and in-plane compressions, SR filled tubular structures exhibited different de- formation patterns compared to those of SR or pure fillers. A constraint effect was found between the filler tubular and container SR. With fillers contained inside the SR structures, the plateau stresses for three conditions were all promoted compared to those of SR. The best out-of-plane compression resistance occurred in the SR filled rectangle which might be caused by larger interaction areas between the SR and rectangular structures. The (specific) energy absorption of the SR filled tube compressed out-of-plane was the largest. The peak and plateau stress of the SR filled triangle was the largest compared to other structures when compressed in plane due to stability of the triangle. It was found that the plateau stress, energy absorption and specific energy absorption of SR filled triangle was the largest, while that of SR filled rectangle was the lowest.
Źródło:
Journal of Theoretical and Applied Mechanics; 2023, 61, 2; 233--244
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of out-of-plane free vibration of single damaged curved beam based on precise algorithm of structural mechanics
Autorzy:
Li, Xiaofei
Pan, Zhouyang
Guo, Hainan
Powiązania:
https://bibliotekanauki.pl/articles/2200899.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
out-of-plane curved beam
damaged
stiffness matrix
free vibration
Opis:
Based on a dynamic discrete model of an out-of-plane curved beam with a constant cur- vature, eigen-properties of the spatial curved beam structure in undamaged and damaged configurations are considered in this paper. In the literature, based on the equivalent sec- tion reduction method, a distributed damage modeling method is proposed. Accoding to Euler-Bernoulli beam theory, the stiffness matrix of shear, bending and torsion coupling is derived. Combined with the lumped mass matrix and the characteristic equation of the multi degree of freedom system, natural frequencies of the undamaged and damaged structures are calculated.
Źródło:
Journal of Theoretical and Applied Mechanics; 2023, 61, 2; 407--414
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance analysis of serpentine springs compliant to out-of-plane oscillation
Autorzy:
Duong, Nguyen Van
Chien, Nguyen Quoc
Hieu, Dang Van
Hoang, Chu Manh
Powiązania:
https://bibliotekanauki.pl/articles/2086964.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
serpentine spring
out-of-plane oscillation
curved spring beam
straight spring beam
mode coupling
Opis:
The performance of two serpentine type springs is comparatively investigated. The first type is composed of straight beams and the second one is composed of circular arcs. Based on comparing calculation results and simulation data, the crab-leg spring model is appropriate for evaluating the stiffness of springs. To obtain the operation mode to be the first mode, the number of turns and the opening angle of springs should be increased. The performance of springs is evaluated via analysis of mode coupling. This study is useful for choosing an appropriate serpentine spring and the stiffness calculation model for applications in microelectroemchanical sensors and actuators.
Źródło:
Journal of Theoretical and Applied Mechanics; 2022, 60, 1; 91--101
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Out-of-plane static crushing of thin-walled honeycomb structures. Numerical and experimental investigation
Autorzy:
Ciepielewski, Radosław
Dybcio, Paweł
Barnat, Wiesław
Powiązania:
https://bibliotekanauki.pl/articles/102078.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
honeycomb
thin-walled structure
static compression test
out-of-plane compression
FEM
LS-DYNA
Alucore
plaster miodu o cienkich ściankach
test kompresji statycznej
kompresja pozasłoneczna
MES
Opis:
Aim of presented study was to compare plateau stress in honeycomb structures under out-of-plane load calculated using Wierzbicki formula with numerical simulations validated using experimental trials. ALUBOND® Alucore honeycomb structure was examined. The results of theoretical, experimental and numerical investigation are reported. Two methods of modeling core behavior were evaluated using simulations. Full core geometry and simplified Y-shaped element were analyzed. Both approaches were compared with experimental out-of-plane compression tests. Aim of the study was to determine the influence of core geometrical parameters on obtained plateau stress value. Various foil thicknesses and cell sizes were studied numerically. The results showed, that initial and final deformation mode strongly depends on the geometry of the honeycomb structure. Force required to crush the core grew with increase of wall thickness, and decreased with increase of cell size. Calculations were performed using an implicit integration scheme implemented in the LS-DYNA software. Research showed the presence of plateau relationship between stress and geometric dimensions and structure response. Good agreement between results obtained by all methods was achieved. Basing on the results, conclusions concerning modeling honeycomb materials were drawn.
Źródło:
Advances in Science and Technology. Research Journal; 2018, 12, 3; 96-105
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the Impact of Weft Density on Fabric Dynamic Thickness under Tensile Forces
Określenie wpływu gęstości wątku na zmianę grubości tkaniny podczas oddziaływania sił rozciągających
Autorzy:
Penava, Željko
Šimić Penava, Diana
Knezić, Željko
Powiązania:
https://bibliotekanauki.pl/articles/234443.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
woven fabric
dynamic thickness
warp density
weft density
tensile force
extension
out-of-plane woven fabric ratio
tkanina
grubość dynamiczna
gęstość osnowy
gęstość wątku
siła rozciągająca
przedłużenie
stosunek tkaniny w płaszczyźnie
Opis:
This paper deals with the impact of fabric density on fabric thickness change when samples are subjected to uniaxial tensile forces in the weft direction. During stretching, fabric thickness changes depending on the value of the tensile force. In an effort to be as precise as possible in measuring fabric dynamic thickness changes and the area on which the tensile force acts, a new measuring apparatus was designed and constructed. This measuring apparatus allows the simultaneous measurement of fabric dynamic thickness, related tensile axial forces and extension. Measurements of the fabric dynamic thickness, breaking force and breaking extension during the stretching process were carried out on five samples of cotton woven fabric with a constant warp density and different weft densities in the same structural plain weave. Based on the experimentally obtained values, the paper presents diagrams of the relationship between dynamic changes in fabric thickness in relation to the tensile force and extension. The research presented in this paper shows that an increase in the tensile force increases fabric thickness for all weft densities. Also, the out-of-plane woven fabric ratio was calculated as a relation between the relative thickness strain and relative axial strain. The characteristic curve shows this ratio.
W artykule określono wpływ gęstości wątku na zmianę grubości tkaniny podczas oddziaływania jednoosiowych sił rozciągających w kierunku wątku. Podczas rozciągania grubość tkaniny zmienia się w zależności od wartości siły rozciągającej. Aby pomiar dynamicznych zmian grubości tkaniny i obszaru, na który działa siła rozciągająca był jak najbardziej precyzyjny zaprojektowano i zbudowano nowy aparat pomiarowy. Zaprezentowane urządzenie pomiarowe umożliwia jednoczesny pomiar grubości dynamicznej tkaniny oraz powiązanych sił osiowych i rozciągania. Pomiary grubości dynamicznej tkaniny, siły zrywającej i rozciągania przy zerwaniu podczas procesu rozciągania przeprowadzono na pięciu próbkach tkanin bawełnianych o stałej gęstości osnowy, różnych gęstościach wątku i tym samym strukturalnym splocie płóciennym. Na podstawie uzyskanych eksperymentalnie wartości w pracy przedstawiono schematy zależności między dynamicznymi zmianami grubości tkaniny w stosunku do siły rozciągającej i rozciągania. Badania przedstawione w artykule pokazały, że wzrost siły rozciągającej zwiększa grubość tkaniny dla wszystkich gęstości wątku. Obliczono również stosunek tkaniny w płaszczyźnie jako stosunek między odkształceniem względnej grubości a względnym odkształceniem osiowym.
Źródło:
Fibres & Textiles in Eastern Europe; 2019, 6 (138); 46-53
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-6 z 6

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies