Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "nonlinear effects" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Analysis of optical-microwave mixing process in electro-optical modulators
Autorzy:
Galwas, B.A.
Szczepaniak, Z.R.
Powiązania:
https://bibliotekanauki.pl/articles/308368.pdf
Data publikacji:
2001
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
electro-optical modulator
nonlinear effects
microwave-optical mixing
Opis:
The principle of operation and the general parameters of the electro-optical Mach-Zehnder modulators are reminded in the paper. With the use of the mathematical relationships describing the transmission of the optical signal through the modulator, the theoretical model of the optical signal transmission with two modulating signals at two frequencies will be presented. The theoretical relationships describing the efficiency of the optical-microwave mixing and frequency multiplying in the two-tone operation will be derived. The analysis and the simulations will be performed for different operating points, where the nonlinearity of the transmission characteristic is specially strong.
Źródło:
Journal of Telecommunications and Information Technology; 2001, 2; 57-63
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nonlinear Influence of Sound on the Vibrational Energy of Molecules in a Relaxing Gas
Autorzy:
Perelomova, A.
Powiązania:
https://bibliotekanauki.pl/articles/177217.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
relaxing gas
non-equilibrium media
nonlinear effects of sound
Opis:
Dynamics of a weakly nonlinear and weakly dispersive flow of a gas where molecular vibrational relaxation takes place is studied. Variations in the vibrational energy in the field of intense sound is considered. These variations are caused by a nonlinear transfer of the acoustic energy into energy of vibrational degrees of freedom in a relaxing gas. The final dynamic equation which describes this is instantaneous, it includes a quadratic nonlinear acoustic source reflecting the nonlinear character of interaction of high-frequency acoustic and non-acoustic motions in a gas. All types of sound, periodic or aperiodic, may serve as an acoustic source. Some conclusions about temporal behavior of the vibrational mode caused by periodic and aperiodic sounds are made.
Źródło:
Archives of Acoustics; 2012, 37, 1; 89-96
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital volume correlation in an environment with intensive salt-and-pepper noise and strong monotonic nonlinear distortion of light intensity
Autorzy:
Tu, P.
Bai, Y.
Xu, W.
Dong, B.
Ye, S.
Yang, Q.
Zhou, Y.
Powiązania:
https://bibliotekanauki.pl/articles/173712.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
digital volume correlation
correlation function
salt-and-pepper noise
nonlinear effects
Opis:
Digital volume correlation is an image-based technique for internal 3D displacement and strain fields measurement or analysis widely used in the field of experimental mechanics. A widely used correlation function (criterion) of digital volume correlation is Pearson correlation function, which suffers from the problem of the acquired data being contaminated by salt-and-pepper noise and monotonic nonlinear distortion of the light intensity. In this work, a 3D correlation function called the Spearman correlation function is used to deal with those interferences. A numerical experiment shows that the performance of Spearman correlation function using integer-pixel registration in an environment with 10% salt-and-pepper noise is better than that of Spearman and Pearson correlation functions using sub-pixel registration in an environment with 1% salt-and-pepper noise. As the light intensity distortion is significant, the error of Pearson correlation function is considerable; meanwhile, the error of Spearman correlation function is small. In conclusion, Spearman correlation function is, in particular, practical and useful in digital volume correlation.
Źródło:
Optica Applicata; 2017, 47, 2; 209-223
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie symptomów nieliniowych w diagnostyce technicznej
The use of nonlinear symptoms in technical diagnostics
Autorzy:
Dąbrowski, Z.
Powiązania:
https://bibliotekanauki.pl/articles/328678.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
efekty nieliniowe
modele symulacyjne
diagnostyka maszyn
nonlinear effects
simulation models
machine diagnostics
Opis:
Podstawowy problem diagnostyczny, którym jest znalezienie zależności pomiędzy obserwowanym sygnałem a parametrami stanu, może być rozwiązany przy użyciu różnego rodzaju modeli diagnostycznych. Najpopularniejszy sposób polegający na opisie dystrybucji energii nie jest możliwy w sytuacjach gdy zmianie postaci widma nie towarzyszy zmiana energii sygnału. W takich przypadkach miarą diagnostyczną mogą być właściwie interpretowane zjawiska nieliniowe. W referacie przedyskutowano różne aspekty tego problemu, szczególnie uwzględniając przypadek gdy system w początkowym okresie życia jest liniowy a w trakcie eksploatacji pojawiają się i zwiększają efekty nieliniowe.
In vibroacoustic diagnostics the basis problem is to find a symptom which can guarantee the possibility of making conclusions about the state of an object with high reliability. Such a symptom can result from the assumption that energy dissipation increases during the wear and tear, and that the energy of parasitic vibroacoustic process is proportional to general dissipation of energy. But when the growth of the vibration level and noise level (in whole noticeable spectrum or in selected bandwidth) is not proportional to the wear, this doesn't mean yet that vibroacoustic process is not sensitive to it. Author discusses a postulate that the intensity of nonlinear effects increases during a machine's operating time, and try to look for a measure defining the deviation from the linear model. For this purpose he uses the signal-model relationship, which assumes that nonlinear phenomena are so weak, that it is possible to accept additive nonlinear "correction" to the linear model. Author analyses the problem of expansion of defects when the initial state of an object is described with sufficient precision by linear model and during wear process the nonlinear effects increase.
Źródło:
Diagnostyka; 2004, 30, T. 1; 130-136
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The model of diagnostic of nonlinear viscoelastomeric damper
Model diagnostyczny nieliniowego lepko-sprężystego tłumika drgań
Autorzy:
Warczek, J.
Powiązania:
https://bibliotekanauki.pl/articles/327230.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
vibration damping
nonlinear effects
diagnosis
diagnostic model
tłumienie drgań
efekty nieliniowe
diagnozowanie
model diagnostyczny
Opis:
Damping of mechanical vibrations is often realized by viscous dampers with nonlinear characteristic. The progressive wear them leads to a deterioration of working conditions of machinery and vehicles. Bad technical condition of the damper also adversely affects the occupants of the means of transport. In many cases, there are no effective methods for determining their condition. The aim of the study was to develop a computational model of the viscous damper takes account of the characteristics such as nonlinearity and asymmetry and its dependence on the parameters of extortion. Taking into account the impact of these factors on the instantaneous value of the force generated by the element enables the use of computational model to determine the technical condition.
Tłumienie drgań mechanicznych jest często realizowane przez tłumiki wiskotyczne o nieliniowych charakterystykach. Stopniowe ich zużywanie się prowadzi do pogorszenia warunków pracy maszyn i pojazdów. Zły stan techniczny tłumika drgań wpływa również niekorzystnie na osoby przebywające w środkach transportu. W wielu przypadkach brak jest skutecznych metod określania ich stanu technicznego. Celem badań było opracowanie modelu obliczeniowego wiskotycznego tłumika drgań uwzględniającego jego cechy takie jak nieliniowość i niesymetryczność charakterystyki oraz jej zależność od parametrów wymuszenia. Uwzględnienie wpływu wymienionych czynników na chwilowe wartości siły generowanej przez taki element umożliwia wykorzystanie modelu obliczeniowego do wyznaczania miar stanu technicznego.
Źródło:
Diagnostyka; 2014, 15, 4; 29-34
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Matrices of the tensor with the internal symmetry [V2][V5]
Macierze tensora o symetrii wewnętrznej [V2][V5]
Autorzy:
Kucharczyk, W.
Górski, P.
Ledzion, R.
Powiązania:
https://bibliotekanauki.pl/articles/296429.pdf
Data publikacji:
2012
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Tematy:
nieliniowy efekt elektrooptyczny
macierze tensora
symetria wewnętrzna
nonlinear electrooptic effects
tensor matrices
tensor of the internal symmetry
Opis:
Matrices of the tensor of the internal symmetry [V2][V5] are presented for those point symmetry classes for which the matrices have not been published yet. Conditions allowing for measurements of nonlinear electrooptic effects are discussed.
Przedstawiono macierze o symetrii wewnętrznej [V2][V5] dla tych 12 nieposiadających środka symetrii klas symetrii, dla których macierze te nie były dotychczas publikowane. Przeanalizowano warunki zwiększające szanse obserwacji nieliniowych efektów elektrooptycznych.
Źródło:
Scientific Bulletin. Physics / Technical University of Łódź; 2012, 33; 73-80
1505-1013
2449-982X
Pojawia się w:
Scientific Bulletin. Physics / Technical University of Łódź
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Performance analysis of optimized non-zero dispersion shifted fiber without amplification and without dispersion compensation for wavelength division multiplexing optical networks
Autorzy:
Priya, R.
Sivanantharaja, A.
Selvendran, S.
Powiązania:
https://bibliotekanauki.pl/articles/174883.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
non-zero dispersion shifted fiber (NZDSF)
repeaterless wavelength division multiplexing (WDM) links
dispersion
nonlinear effects
four wave mixing (FWM)
refractive index profile
bit error rate (BER)
Opis:
In this paper, we have analyzed the performance of our optimized non-zero dispersion shifted fiber with three different test fibers, namely, single mode fiber, conventional non-zero dispersion shifted fiber and dispersion shifted fiber. While comparing the performances of those fibers, our optimized non-zero dispersion shifted fiber has yielded a better quality factor of 5.24 at 2.5 Gbit/s for long haul fiber length of 120 km in the absence of amplification and dispersion compensation. In order to measure the nonlinear impairments of wavelength division multiplexing channel, the quality factor values are measured at the sample channel 193.1 THz for 150 km lengthed fiber with peak input power of 6 dBm. Due to a very large effective area of optimized non-zero dispersion shifted fiber, it delivers a better quality factor of 6.12 compared to the other test fibers. We have also carried out the analysis for higher bitrates and different modulation formats at the transmission end. More phase encoded modulations of carrier-suppressed return-to-zero–differentiated phase shift keying and carrier-suppressed return-to-zero–differential quadrature phase shift keying offered optimum performances for a distance of 120 km at 10 Gbit/s bitrate. By including optical amplifiers, we could achieve a record fiber transmission length of 4000 km at the bitrate of 2.5 Gbit/s which can help the future wavelength division multiplexing optical networks to a great extent.
Źródło:
Optica Applicata; 2015, 45, 4; 473-490
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the possibility of measurements of nonlinear electrooptic effects in 432 symmetry crystals
Analiza możliwości pomiaru nieliniowych efektów elektrooptycznych w kryształach o symetrii 432
Autorzy:
Kucharczyk, W.
Górski, P.
Izdebski, M.
Ledzion, R.
Powiązania:
https://bibliotekanauki.pl/articles/296447.pdf
Data publikacji:
2011
Wydawca:
Politechnika Łódzka. Wydawnictwo Politechniki Łódzkiej
Tematy:
nieliniowy efekt elektrooptyczny
macierz tensora
tensor elektrooptyczny
kryształ o symetrii 432
nonlinear electrooptic effects
matrices of electrooptic tensors
432 symmetry crystals
Opis:
It is shown that despite the fact that in 432 point group crystals the linear electrooptic effect is vetoed by symmetry there are configurations for which the third-order effect may appear. The results obtained indicate that the 432 crystals are promising media for measurements of nonlinear electrooptic effects. Macroscopic description of nonlinear electrooptic phenomena in the crystals is presented and the matrices of tensors representing the effects up to the fifth-order are given.
Pokazano, że mimo eliminacji przez symetrię liniowego efektu elektrooptycznego, w kryształach o symetrii 432 istnieją konfiguracje, w których można spodziewać się wystąpienia efektu trzeciego rzędu. Otrzymane wyniki wskazują, że kryształy o takiej symetrii są obiecującymi materiałami dla pomiarów nieliniowych efektów elektrooptycznych. Przedstawiono makroskopowy opis nieliniowych efektów elektrooptycznych w kryształach o symetrii 432 łącznie z zestawieniem postaci macierzy tensorów opisujących efekty elektrooptyczne do piątego rzędu włącznie.
Źródło:
Scientific Bulletin. Physics / Technical University of Łódź; 2011, 32; 45-52
1505-1013
2449-982X
Pojawia się w:
Scientific Bulletin. Physics / Technical University of Łódź
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Effects Induced in Liver Tissues by Pulsed Focused Ultrasonic Beams from Annular Array Transducer
Autorzy:
Kujawska, T.
Secomski, W.
Krawczyk, K.
Nowicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/176937.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
annular array transducer
pulsed focused nonlinear ultrasound
electronically moved focus
tissue heating
biological effects
tissue necrosis
Opis:
Many therapeutic applications of pulsed focused ultrasound are based on heating of detected lesions which may be localized in tissues at different depths under the skin. In order to concentrate the acoustic energy inside tissues at desired depths a new approach using a planar multi-element annular array transducer with an electronically adjusted time-delay of excitation of its elements, was proposed. The 7-elements annular array transducer with 2.4 MHz center operating frequency and 20 mm outer diameter was produced. All its elements (central disc and 6 rings) had the same radiating area. The main purpose of this study was to investigate thermal fields induced in bovine liver in vitro by pulsed focused ultrasonic beams with various acoustic properties and electronically steered focal plane generated from the annular array transducer used. The measurements were performed for the radiating beams with the 20 mm focal depth. In order to maximize nonlinear effects introducing the important local temperature rise, the measurements have been performed in two-layer media comprising of a water layer, whose thickness was specific for the transducer used and equal to 13 mm, and the second layer of a bovine liver with a thickness of 20 mm. The thickness of the water layer was determined numerically as the axial distance where the amplitude of the second harmonics started to increase rapidly. The measurements of the temperature rise versus time were performed using a thermocouple placed inside the liver at the focus of the beam. The temperature rise induced in the bovine liver in vitro by beams with the average acoustic power of 1W, 2Wand 3Wand duty cycle of 1/5, 1/15 and 1/30, respectively, have been measured. For each beam used the exposure time needed for the local tissue heating to the temperature of 43.C (used in therapies based on ultrasonic enhancement of drug delivery or in therapies involving stimulation of immune system by enhancement of the heat shock proteins expression) and to the temperature of 56.C (used in HIFU therapies) was determined. Two sets of measurements were done for each beam considered. First, the thermocouple measurement of the temperature rise was done and next, the real-time monitoring of dynamics of growth of the necrosis area by using ultrasonic imaging technique, while the sample was exposed to the same acoustic beam. It was found that the necrosis area becomes visible in the ultrasonic image only for beams with the average acoustic power of 3 W, although after cutting the sample the thermo ablated area was visible with the naked eye even for the beams with lower acoustic power. The quantitative analysis of the obtained results allowed to determine the exposure time needed to get the necrosis area visible in the ultrasonic image.
Źródło:
Archives of Acoustics; 2011, 36, 4; 937-944
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A nonlinear analysis method for arch-shaped shell roofs made of cold-formed steel profiles
Autorzy:
Zhdanov, D.
Ulasevich, V.
Powiązania:
https://bibliotekanauki.pl/articles/402655.pdf
Data publikacji:
2016
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
arch-shaped shell roof
cold-formed steel profiles
nonlinear analysis method
action effects model
structural resistance model
szkielet dachu w kształcie łuku
profile stalowe formowane na zimno
metoda analizy nieliniowej
efekty działanie modelu
odporność modelu strukturalnego
Opis:
The paper deals with the problem of static structural analysis of shallow arch-shaped shell roofs assembled from curved cold-formed steel profiles. A nonlinear analysis procedure has been proposed to estimate the stress-strain state of such roof structures. It is based on two interrelated analysis models developed for the purpose – namely, an action effects model used for the static analysis of deformational behaviour of shallow arch-shaped structural systems, and a resistance model, for strength analysis of cold-formed steel profiles.
Źródło:
Budownictwo i Inżynieria Środowiska; 2016, 7, 3; 187-191
2081-3279
Pojawia się w:
Budownictwo i Inżynieria Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies