Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "non-contact technique" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Investigations of material behaviour under monotonic tension using a Digital Image Correlation system
Autorzy:
Szymczak, T.
Powiązania:
https://bibliotekanauki.pl/articles/281605.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
geometrical imperfection
notch
extensometer
DIC
non-contact technique
Opis:
The paper reports behaviour of engineering materials for different kinds of notches, i.e. having U, V shapes. Their variants with respect to dimensions are illustrated in static and fatigue tests. The influence of these types of geometrical imperfections on material fatigue is presented using variations of the Wöhler curve, number of cycles to failure and the fatigue notch factor. Results of experiments conducted by the use of the Digital Image Correlation system called 4M Aramis are illustrated. Courses of tensile characteristics of the 41Cr4 steel, obtained by means of both techniques: extensometer and DIC are compared. They indicated that the DIC technique can be a good tool for determination of mechanical properties. The equivalent strain full-field distributions on specimens tensioned with and without imperfections up to material fracture are presented. The influence of U and V notches on variations of tensile curves is shown.
Źródło:
Journal of Theoretical and Applied Mechanics; 2018, 56, 3; 857-871
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of non-contact geodetic measurement techniques in dam monitoring
Autorzy:
Zaczek-Peplinska, Janina
Kowalska, Maria
Powiązania:
https://bibliotekanauki.pl/articles/2173994.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
inżynieria hydrotechniczna
zapora
monitorowanie
pomiar geodezyjny
metoda bezkontaktowa
hydrotechnical engineering
dam
monitoring
geodetic measurement
non-contact technique
Opis:
The maintenance of dams, including the protection of reservoir and flood embankments, requires regular control measurements and assessment of their technical condition. The choice of measurement methods, especially in terms of their speed and reliability, become crucial especially when the facilities are endangered due to a natural disaster. However, despite the enormous rapid development of modern geodetic measurement techniques, measurements at most dams are still conducted using classical techniques, such as angular-linear or leveling measurements which require interference with the measured structure. In addition, they need to be personally performed by employees or require visual inspections of the structure or in its protection zone. This article presents non-contact geodetic measurement techniques, such as terrestrial laser scanning, remote sensing classification of intensity and thermovision images recorded with various measurement sensors, digital image correlation, digital photogrammetry, or UAV. They are presented and compared in terms of their reliability, efficiency and accuracy of the obtained data, and the possibility of their automation and integration. As surveyors and hydraulic and geotechnical engineers are increasingly turning to modern measurement technologies, the aim of this paper is to help in selecting appropriate and effective monitoring tools ensuring fast and safe measurements crucial for the safety and maintenance of concrete structures. It presents examples of research based on the use of the modern measuring techniques carried out in recent years by employees of the Faculty of Geodesy and Cartography at the Warsaw University of Technology.
Źródło:
Archives of Civil Engineering; 2022, 68, 3; 49--70
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Results of Non-Contact Coordinate Measurement of a Cutting Tool Applied for Mould Machining
Autorzy:
Bazan, Anna
Magdziak, Marek
Jamuła, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/11236770.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
cutting tools
tool wear monitoring
mould machining
measuring technique
non-contact measurements
accuracy of measurements
narzędzia skrawające
zużycie narzędzi
obróbka form
technika pomiarowa
pomiar bezkontaktowy
dokładność pomiaru
Opis:
One of the main problems of machining of moulds is the need for an effective monitoring system of wear of cutting tools. This paper presents the results of coordinate measurements of a cutting tool which were obtained by using the non-contact measuring system based on the ACCURA II coordinate measuring machine equipped with the LineScan laser measuring probe and the Calypso metrology software. Investigations were carried out for several measurement strategies including different measurement resolutions and scanning speeds. The results of the coordinate measurements obtained by using the above-mentioned coordinate measuring system were compared to the reference data measured by means of the InfiniteFocus microscope. The measurement results were analysed by means of two software packages: Focus Inspection and Zeiss Reverse Engineering. The point clouds measured by using the LineScan probe were characterized by the selected deviation statistics equal to 4-6 μm when a good match between measurement points and the reference data was obtained. Moreover, these statistics mainly depend on the measurement resolution. The results of the performed experimental research allowed for drawing conclusions concerning the significance of the effect of the adopted measurement strategies on the results of the non-contact coordinate measurements of the selected cutting tool. The application of the non-contact coordinate measurements to the above-mentioned measurement task may contribute to the development of regeneration methods for cutting tools applied for mould manufacturing.
Źródło:
Archives of Foundry Engineering; 2022, 22, 4; 121--127
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies