Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "municipal solid waste" wg kryterium: Temat


Tytuł:
Method of setting locations for municipal solid waste collection points in protected areas
Autorzy:
Malinowski, M.
Religa, A.
Powiązania:
https://bibliotekanauki.pl/articles/101568.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
municipal solid waste
municipal solid waste collection point
GIS
AHP
Opis:
According to the amendment to the Act on maintaining cleanliness and order in communes, a stationary a municipal solid waste collection point (MSWCP) must be established in each Polish commune or commune union and situated close to the commune center. This point (MSWCP) should exist in the commune (or commune union), which are covered in 100% by protected zone. These objects are a new element in managing of the stream of municipal solid waste in Poland, known in the European countries as “household waste recycling centers” (HWRC). The aim of the work was developing the procedure with the use of tools enabling setting potential locations for MSWCPs in protected areas. The developed method was applied (for verification of the assumptions) in the process of seeking optimal locations for MSWCPs in the communes located in the Świętokrzyski National Park (ŚNP) protection zone. The paper presents the methodology for setting locations for municipal solid waste collection points. A method was developed using the Analytic Hierarchy Process (AHP) and Geographical Information System (GIS). It was possible to designate between 98 and 191 potential locations of MSWCPs in the communes situated in the ŚNP protection zone. The assumed criterion of maximum distance from the commune center eliminated 85% of locations. Optimal locations for MSWCPs in each commune were determined using AHP method. The main results of this research was to establish of MSWCP location for every commune in analyzed protected zone, based on the proposed methodology. The method presented in the paper may be a tool for the environment impact assessment of these investments.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2016, IV/3; 1603-1614
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of morphological composition of wastes deposited on illegal dumping sites located in the area of Olsztyn district
Autorzy:
Ciura, D.
Łukasiewicz, M.
Malinowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/101035.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
municipal solid waste
illegal dumping sites
Opis:
Generated wastes require space and financial outlays on their proper storage and processing, whereas the lack of means usually leads to depositing wastes in places not meant for this purpose. Illegal dumping sites still emerge, despite introducing in Poland the obligatory (common) fee for collection and management of wastes and the obligatory establishing the Selective Waste Collection Points in each district. The aim of the work was conducting a detailed inventory of illegal dumping sites in the area of Olsztyn district (situated in the Silesia province, on the Krakow-Częstochowa Upland) and indicting the morphological composition of the wastes deposited in these places. The paper presents a detailed analysis of the morphological composition of illegal landfill sites situated in the analyzed district. The investigations located 28 illegal dumping sites, despite the fact that a Selective Municipal Waste Collection Point operates in the district area. The analysis of location, area, mass and composition of the wastes was conducted for each illegal landfill, according to the methodology developed for this purpose. Over a half of the illegal dumping sites was situated in the forest and on 4 of them the estimated mass of dumped waste exceeded 1Mg. Debris constitutes the highest proportion (21.8%) of the waste morphological composition. Recyclable wastes, i.e. glass, plastics, paper and cardboard, used electronic and electric equipment dominated in the morphological composition of wastes on small landfills, situated close to buildings (less than 250m) and had the smallest area (below 1m2 ). The share of debris and construction wastes was growing with increasing landfill area.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2017, IV/1; 1301-1315
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the undersize fraction temperature changes during the biostabilization process
Autorzy:
Malinowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/101271.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
municipal solid waste
undersize fraction
biostabilization
Opis:
Mixed municipal solid waste collected from the area of each Polish district (commune) is transferred to Regional Installations for Municipal Solid Waste Treatment. They comprise one or more of the following facilities: installations for mechanical-biological waste treatment (MBT), installations for thermal treatment of municipal solid waste, green waste composting plants and landfill sites. MBT installations have been currently the dominant technology of mixed municipal solid waste treatment in Poland. In these installations mixed waste is subjected to mechanical processes (including: crushing, separation, screening and classification) resulting in the production of the undersize fraction with usual grain size below 80mm and the oversize fraction with grain size over 80mm. Because of the necessity of stabilization and hygenization of the undersize fraction prior to landfilling, it is subjected to the process of biological treatment, e.g. biostabilization. The main aim of the research was to analyze the temperature changes during the biostabilization of the undersized fraction in thermally insulated BKB100 laboratory bioreactor. The research covered a 14-day period of the intensive phase. The analyses were performed in 6 replications. 40.1±2.2kg of waste with density of 519.2±27.5kgˑm-3 and the biodegradable fraction content of 41.9±1.9% was placed in the reactor. The temperature of waste inside the reactor was measured by 9 Pt 1000 temperature sensors. The air for the process was constantly supplied from the outside of the reactor. Flow of the supplied air with temperature of 18.3±3.1°C was regulated depending on the average indication of all temperature sensors. Results of the temperature measurements were averaged and showed using Golden Software Surfer 7. As a result of the conducted research it was found that changes in the temperature inside the bioreactor occurred uniformly throughout its full volume. The time of reaching the temperature of 45°C (the beginning of thermophilic phase) was 25.6±4.0 hours (21 hours at the earliest). During the first period the temperature in the reactor was increasing most intensively in the lower parts of the layer, in the central part of the layer the temperature reached 45°C after 34 hours at the earliest, whereas on average it took 47.7±9.9 hours. The average maximum process temperature was 64.8±3.5°C.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2017, IV/3; 1773-1784
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of Municipal Solid Waste Landfill for Baghdad City
Autorzy:
Takrid, Munaem Nafae
Haydar, Ahmed Al-Najar
Nabeel, Hashim Ameen Al-Tameemi
Huda, Nassar Karkoush
Powiązania:
https://bibliotekanauki.pl/articles/1178769.pdf
Data publikacji:
2017
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Municipal solid waste generation rate
landfill
Opis:
Accumulation of municipal solid waste in residential areas is one of the public health problems in Iraq. In the other hand, accurate and reliable information on solid waste generation rate are very important elements to plan and implement solid waste management system. The volume and surface area required for a landfill to dispose the municipal solid wastes generated in Baghdad city is evaluated in this study. The per capita solid wastes generation rates are measured for a family consists of 10 individuals by using portable balance (Salter, 0 to 130 kg). Probability sampling is used to determine the minimum number of measurements needed to evaluate the mean of per capita solid wastes generation rate with a certain level of precision (a specified error level of 5% is selected corresponds to 95% confidence that the mean value is in accurate estimate of the true value). The results indicate that an area of approximately 1603 m on a side is required for the next 20 years as a sanitary landfill for disposing the municipal solid wastes generated in Baghdad city.
Źródło:
World Scientific News; 2017, 90; 1-10
2392-2192
Pojawia się w:
World Scientific News
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermographic evaluation of CaO additive on the process of waste hygienization
Autorzy:
Famielec, S.
Gliniak, M.
Kapjor, A.
Łukasiewicz, M.
Malinowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/101498.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
CaO
Municipal Solid Waste
hygienization
thermography
Opis:
Municipal Solid Waste (MSW) is the mixture of many waste types, including organic waste (garden and park waste, food and kitchen waste, paper and cardboard etc.). Such waste creates a living environment for various microorganism species, many of which are known as pathogenic. The presence of microorganisms in favorable conditions (pH, organic matter content, carbon content, moisture, appropriate granulation) leads to decomposing of organic matter, which is accompanied by an increase in temperature. Microorganisms in waste pose a serious risk for staff operating at waste treatment plants. Moreover, heat released by their activity may cause a fire in waste storage facilities. Therefore, it is necessary to search for methods of waste stabilization and hygienization. The most commonly applied technology for waste stabilization is its processing in Mechanical Biological Treatment (MBT) plants. Such treatment is capital – and timeconsuming, however. Waste liming can become an alternative method for stabilization and hygienization of waste. Lime addition is one of the oldest method known by humans for hygienization of certain waste materials, such as animal waste. Currently, liming is applied in sewage sludge treatment as one of the initial operations and is necessary for further sludge management processes. The aim of the research was to valuate temperature changes during mixed MSW hygienization process with CaO addition in the amount of several percent by using a thermographic camera. The reaction of CaO with waste is short and lasts no longer than 20 minutes. The maximal temperatures were reached after 65-124 seconds from the time of CaO addition. The most dynamic increase in temperature were observed up to approx. 120th second of the process, with the rate dependent on the initial moisture of the material. The observed pH values indicate that the maximal dose of CaO additive should not exceed 3%. Such a dose is sufficient for waste to reach pH 12, which, according to literature, guarantees the deactivation of microorganisms.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2016, IV/4; 1857-1865
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Motor Fuels and Energy – Producing Fuels Generation Based on the Processing of Municipal Solid Waste Organic Components
Autorzy:
Temirbekova, Marzhan
Wójcik, Waldemar
Stoyak, Vyacheslav V.
Powiązania:
https://bibliotekanauki.pl/articles/1955452.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
municipal solid waste
bioethanol
fermentation
ethanol fermentation
Opis:
Municipal solid waste management and its disposal are considered one of the major challenges facing the urban communities around the world. Effective solid waste treatment involves a variety of approaches, treatment technologies and concepts to ensure the protection of public health and the environment. Waste landfill is the method most commonly used worldwide, despite all the significant environmental, health and economic consequences. Thus, alternative methods such as the municipal solid waste pretreatment, fermentation, ethanol fermentation and anaerobic fermentation have been the focus of heightened attention. Using these methods, an alcohol-containing liquid was obtained from 1.5 kg of the organic fraction of municipal solid waste (OFMSW), which had an ethanol percentage of 97.45%. Consequently, if properly managed and used, municipal solid waste can be a viable source of energy rather than a source of pollution.
Źródło:
Journal of Ecological Engineering; 2021, 22, 7; 73-80
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concepts of energy use of municipal solid waste
Autorzy:
Primus, Arkadiusz
Chmielniak, Tadeusz
Rosik-Dulewska, Czesława
Powiązania:
https://bibliotekanauki.pl/articles/1845411.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
municipal solid waste
hydrogen
fuel cells
cogeneration
waste gasification
Opis:
The introduction highlights the technologies of converting the chemical energy of biomass and municipal waste into various forms of final energy (electricity, heat, cooling, new fuels) as important in the pursuit of a low- -carbon economy, especially for energy and transport sector. The work continues to focus mainly on gasification as a process of energy valorization of the initial form of biomass or waste, which does not imply that other methods of biomass energy use are not considered or used. Furthermore, the article presents a general technological flowchart of gasification with a gas purification process developed by Investeko S.A. in the framework of Lifecogeneration.pl. In addition, selected properties of the municipal waste residual fraction are described, which are of key importance when selecting the technology for its energy recovery. Significant quality parameters were identified, which have a significant impact on the production and quality of syngas, hydrogen production and electricity generation capacity in SOFC cells. On the basis of the research on the waste stream, a preliminary qualitative assessment was made in the context of the possibility of using the waste gasification technology, syngas production with a significant share of hydrogen and in combination with the technology of energy production in oxide-ceramic SOFC cells. The article presents configurations of energy systems with a fuel cell, with particular emphasis on oxide fuel cells and their integration with waste gasification process. An important part of the content of the article is also the environmental protection requirements for the proposed solution.
Źródło:
Archives of Environmental Protection; 2021, 47, 2; 70-80
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metrological Aspects of Controlling the Rotational Movement Parameters of the Auger for Dewatering Solid Waste in a Garbage Truck
Autorzy:
Wójcik, Waldemar
Bereziuk, Oleh V.
Lemeshev, Mykhailo S.
Bohachuk, Volodymyr V.
Polishchuk, Leonid K.
Bezsmertna, Oksana
Smailova, Saule
Kurmagazhanova, Saule
Powiązania:
https://bibliotekanauki.pl/articles/27311851.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
municipal solid waste
dehydration
auger
measuring
digital control
Opis:
In the article, a device for measuring the parameters of the rotational movement of the auger for dewatering solid waste is proposed based on the analysis of signal processing methods and measurement of physical quantities. It can be used in the development of high-performance special vehicles for transporting waste as the main link in the structure of machines for the collection and primary processing of solid waste. The structural scheme of the means and block diagram of the microcontroller control program algorithm for implementation of the device for measuring the parameters of the rotational motion are proposed. The main technical characteristics of the proposed means are given. The results of experimental tests for measuring the parameters of rotational motion are shown. The results of experimental studies, which are given in the work, confirmed the reliability of the measured parameters.
Źródło:
International Journal of Electronics and Telecommunications; 2023, 69, 2; 233--238
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Segregation of waste at source reduces the environmental hazards of municipal solid waste in Patna, India
Autorzy:
Singh, A.
Raj, P.
Powiązania:
https://bibliotekanauki.pl/articles/204624.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
municipal solid waste
Patna
environmental pollution
logistic regression
Opis:
Though Municipal Solid Waste (MSW) is a worldwide problem, the collected wastes are dumped in open dumping at landfilling sites while the uncollected wastes remain strewn on the roadside, many-a-time clogging drainage. Such unsafe and inadequate management of MSW causes spread of bacteria, viruses, particulate matter, dioxins and other harmful pollutants in the surroundings and atmosphere. Hence, due to the repeated exposure of population to these pollutants can lead to serious health problems such as Diarrhea/Dysentery, Acute Respiratory Infection (ARI), and Asthma/Chronic Respiratory Diseases (CRD). Therefore, two-phase study included secondary data on diseases caused due to environmental pollution and primary data on MSW and lack of MSW management from 127 households in urban Patna, India. The random sampling method was used for collection of primary survey data, conducted during 2015–16 in selected areas of Patna. Logistic regression model odds ratios and their 95% confidence intervals were used to show the strength of the associations among segregation of wastes at source, segregation behavior, collection bins in the area, distance of collection bins from a residential area, and transportation of MSW. The ROC is a statistical technique to validate the logistic regression method that predicts the occurrence of an event through the comparison of probability picture of an event occurrence observed by probability and the predicted probability of the same event. The area under the ROC curve is up to 0.889 extent, which reveals that the ‘segregation of waste at source’ has a very strong scope to accomplish sustainable recycling at urban Patna in order to manage waste with the overall accuracy of 92.126%, which proves a better fi t logistic regression model. Hence, this paper concludes that ‘segregation of waste at source’ helps to attain sustainable recycling which would be the most viable approach to manage MSW in Patna and would eventually reduce environmental pollutants for the public health safety.
Źródło:
Archives of Environmental Protection; 2018, 44, 4; 96-110
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Paper Components Effect on Hydraulic Characteristics of Biodegradable Municipal Solid Waste
Autorzy:
Hadinata, Febrian
Susanti, Betty
Soraya, Muthia
Silaban, Aprina Sriwita
Powiązania:
https://bibliotekanauki.pl/articles/1838270.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
biodegradable
density
MSW
municipal solid waste
paper
permeability
Opis:
Indonesian municipal solid waste (MSW) is dominated by biodegradable MSW (organic and paper). Due to the degradation process, the physical and hydraulic characteristics of these components can change. It is important to study the physical and hydraulic characteristics of MSW, because landslides occurred in several landfills in Indonesia after heavy rains. Field observations showed that landslides occur due to reduced paper components in the landfill (due to high recycling activities), and cause high percolation of water into the landfill. In the research, 38 samples consisting of two variants of MSW samples (organic and 80% organic + 20% paper), were prepared under the conditions of optimum moisture content. The organic sample of MSW is leaf, while the paper sample of MSW is newspaper, which were shredded to a diameter of about 1 cm. The tests of moisture content, bulk density (in the mould of permeameter), particle size distribution, and permeability were carried out on both sample variants for 90 days, with a test frequency of once in 5 days. The results showed that there was an increase in the moisture content and density, and a decrease in particle size and permeability in both variants of MSW sample. Organic MSW + paper has lower permeability and higher density than organic MSW. This requires further study, because a high paper recycling ratio can lead to a change in the landfill characteristics.
Źródło:
Journal of Ecological Engineering; 2021, 22, 2; 272-278
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected properties of alternative fuel manufactured from municipal solid waste
Autorzy:
Malinowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/62040.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
alternative fuel
fuel
municipal solid waste
fuel property
Opis:
Successive closing down of filled-up large municipal landfill sites or those which no longer fulfil the legal regulations, compel local governments and enterprises dealing with waste disposal, to undertake activities aimed at designing and construction of new waste management plants. One of these is a municipal solid waste sorting plant where the waste stream is divided into sub-screen and screen fraction. The screen fraction after removing ferrous and non-ferrous metals, glass and other impurities and crushing to an appropriate particle size constitutes an alternative fuel. The most frequently alternative fuel is manufactured from selectively collected plastics, rubber, textiles and waste paper. Alternative fuel is also manufactured from municipal solid waste in mechanical waste treatment plants. Municipal solid waste is characterized by a non-uniform morphological composition (depending on many factors), which may result in variable parameters of the manufactured fuel. If the waste fuel manufactured in this way and supplied to cement plants does not reach certain quality standards, its price is low, or the product is not accepted for energy recovery. The work presents results of analyses of selected properties of alternative fuels generated from solid municipal waste stream with regard to the type of communes from which the waste originated (urban commune area or rural communes). Statistical analysis was conducted using Bayesian Networks. As it results from the investigations, alternative fuel manufactured from municipal solid waste is characterized by high values of variation coefficient for such parameters as: ash content, moisture and calorific value. The content of carbon, sulphur and incineration heat revealed low values of variance coefficient. The analyses have demonstrated that technological values of alternative fuel do not depend on the administrative type of the communes where the waste used for their production was collected.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2013, 2/IV
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Impact of the Amount of Fees for the Collection and Management of Municipal Waste on the Percentage of Selectively Collected Waste
Autorzy:
Petryk, Agnieszka
Malinowski, Mateusz
Dziewulska, Magdalena
Guzdek, Sylwia
Powiązania:
https://bibliotekanauki.pl/articles/123943.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
municipal solid waste
waste management
waste collection
waste management fee
Opis:
The changes in the waste management system that have been introduced in Europe and in the world were aimed at counteracting the emergence of illegal dumping sites and increasing the levels of waste recovery and recycling, so that waste management remains in line with the principles of sustainable development and circular economy. The change introduced in 2013 in the municipal waste management system in Poland concerned the assumption of full responsibility by municipalities for the municipal waste collected from owners of residential properties, as well as the establishment and organization of a charging system for residents for the collection and management of the waste. The purpose of the study was to conduct a comparative analysis of fees paid by residents of 93 selected communes of the Lubelskie Province. The study examined the impact of the amount of fees for the waste collection and management on the share of households declaring selective municipal waste collection, the share of selectively collected waste, and the mass accumulation rate of municipal waste. As a result of the analysis conducted using the data from the years 2013–2016, it was revealed that the amount of fees for the collection and management of waste in households that sorted waste contributed significantly to the increase in the percentage of selectively collected waste. Similarly, the smaller the value of the ratio of rates for sorted and mixed waste, the greater the segregation efficiency. This indicates that in the case of the analyzed region, the lower fee charged for sorting waste was an incentive for residents to sort waste.
Źródło:
Journal of Ecological Engineering; 2019, 20, 10; 46-53
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Air-Flow Rate and Biochar Addition on the Oxygen Concentration in Waste and Emitted Gases During Biostabilization of Undersized Fraction from Municipal Solid Waste
Autorzy:
Malinowski, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/1838279.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
municipal solid waste
biochar
intensive phase
biostabilization
oxygen concentration
Opis:
Mechanical biological treatment of waste is still one of the most popular methods for mixed municipal waste treatment. The result of mechanical processing of waste is sorting out: the undersized fraction from municipal solid waste (UFMSW) with granulation below 80 mm, rich in biodegradable organic waste (mainly including food waste, paper, wood, etc.). UFMSW is treated in biological processes in order to reduce the negative environmental effect of this waste. Unfortunately, the processing is not neutral to the environment. The correct course of the aerobic biostabilization process depends on the activity of microorganisms, the intensity of aeration, and the oxygen content in the processed waste. The aim of this paper was to analyze the effect of air-flow rate and biochar addition on the oxygen concentration in waste and in emitted gases during the intensive phase of UFMSW biostabilization. The study was performed under laboratory conditions. Six different variants of the process (without biochar addition and using 1.5; 3; 5; 10 and 20% of biochar addition) were applied. Subsequent replicates were conducted using an averaged air-flow rate of 0.1, 0.2, and 0.4 m3∙d-1∙kg dm.org-1. As a result of the conducted experiments, it was found that both the air-flow rate and the addition of biochar have a significant effect on the oxygen concentration in the treatment waste, as well as its content in the outlet air. Using the highest air-flow rate resulted in the oxygen content not decreasing below 14%, both in the free spaces between the waste and in the emitted gases, while the addition of biochar significantly reduced the oxygen concentration. In the case of lower air-flow rate values, the oxygen content decreased even below 5%. It was found that a high addition of biochar (10 and 20% by weight) at the lowest air-flow rate resulted in the occurrence of anaerobic zones in waste in the first days of the intensive process (between days 2 and 6 of the process), as well as absence of oxygen in the outlet air (between days 2 and 4 of the process). Despite this, no methane (biogas) emissions were found in any of the conducted experiments.
Źródło:
Journal of Ecological Engineering; 2021, 22, 6; 136-144
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impact of Air-Flow Rate and Biochar Addition on the Oxygen Concentration in Waste and Emitted Gases During Biostabilization of Undersized Fraction from Municipal Solid Waste
Autorzy:
Malinowski, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/1838370.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
municipal solid waste
biochar
intensive phase
biostabilization
oxygen concentration
Opis:
Mechanical biological treatment of waste is still one of the most popular methods for mixed municipal waste treatment. The result of mechanical processing of waste is sorting out: the undersized fraction from municipal solid waste (UFMSW) with granulation below 80 mm, rich in biodegradable organic waste (mainly including food waste, paper, wood, etc.). UFMSW is treated in biological processes in order to reduce the negative environmental effect of this waste. Unfortunately, the processing is not neutral to the environment. The correct course of the aerobic biostabilization process depends on the activity of microorganisms, the intensity of aeration, and the oxygen content in the processed waste. The aim of this paper was to analyze the effect of air-flow rate and biochar addition on the oxygen concentration in waste and in emitted gases during the intensive phase of UFMSW biostabilization. The study was performed under laboratory conditions. Six different variants of the process (without biochar addition and using 1.5; 3; 5; 10 and 20% of biochar addition) were applied. Subsequent replicates were conducted using an averaged air-flow rate of 0.1, 0.2, and 0.4 m3∙d-1∙kg dm.org-1. As a result of the conducted experiments, it was found that both the air-flow rate and the addition of biochar have a significant effect on the oxygen concentration in the treatment waste, as well as its content in the outlet air. Using the highest air-flow rate resulted in the oxygen content not decreasing below 14%, both in the free spaces between the waste and in the emitted gases, while the addition of biochar significantly reduced the oxygen concentration. In the case of lower air-flow rate values, the oxygen content decreased even below 5%. It was found that a high addition of biochar (10 and 20% by weight) at the lowest air-flow rate resulted in the occurrence of anaerobic zones in waste in the first days of the intensive process (between days 2 and 6 of the process), as well as absence of oxygen in the outlet air (between days 2 and 4 of the process). Despite this, no methane (biogas) emissions were found in any of the conducted experiments.
Źródło:
Journal of Ecological Engineering; 2021, 22, 6; 136-144
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of Methane Emissions from Mirash Municipal Solid Waste Sanitary Landfill, Differences between IPPC 2006 and LandGEM Method
Autorzy:
Dimishkovska, Biserka
Berisha, Afrim
Lisichkov, Kiril
Powiązania:
https://bibliotekanauki.pl/articles/124901.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
emissions
methane
municipal solid waste
MSW
sanitary landfill
Mirash
Opis:
This paper deals with the estimation of methane emissions from the Mirash municipal solid waste sanitary landfill. The methane emission was calculated according to two different methodologies, namely, IPCC 2006 and LandGEM. Within the framework of the research, the following parameters were evaluated: the amount of landfilled waste, landfill characteristics, and composition of landfilled waste as well as the climate conditions prevailing in the region. According to the IPCC methodology, the total amount of methane emitted from the Mirash landfill during the period 2006–2017 was 30.57 Giga grams (Gg), while according to the LandGEM methodology, the total amount of methane emitted from the Mirash landfill in the period 2006–2017 was 26.32 Giga grams (Gg). The total mass of CH4 in the Mirash regional landfill for the years 2018–2025 is projected to be 53.74 Gg according to the IPCC method, while according to LandGEM method, the projection points to 50.74 Gg. This study was carried out for the sanitary landfill for solid waste management in Mirash, Prishtina Region, in the Republic of Kosovo, during the year of 2018.
Źródło:
Journal of Ecological Engineering; 2019, 20, 5; 35-41
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The concept of land use development of a municipal solid waste landfill: the Cegłów commune case study
Autorzy:
Kwiatkowska-Malina, J.
Dybowska, S.
Powiązania:
https://bibliotekanauki.pl/articles/101195.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
land use development
municipal solid waste landfill
reclamation
recreation
Opis:
The presence of municipal solid waste landfills is an inevitable spatial phenomenon that expresses the planning properties of the process of land use, economic development and the relationship to the environment. The process of land use is continuous, in which a period of planning, development and management of its operation is followed by a period of decline in the performance of (aging) and the fall of the land. Closing the landfill and reclamation results in the appearance of problem areas, i.e. of degraded areas both on the site and in the area of its influence. The paper presents the concept of development of a closed municipal solid waste landfill in the village Woźbin in the commune Cegłów and adjacent areas. According to the ‘Project of closure and reclamation of municipal solid waste landfill in the village Woźbin, in the commune Cegłów’ after the operation of the landfill as well as the technical and biological reclamation, can be implemented forest restoration direction. The concept of developing the reclaimed municipal landfill and the adjacent land is assumed to introduce the planned forest reclamation and complement the recreational function which will increase the attractiveness of the area and will enable its use in a more economical way aimed at integrating the municipal solid waste site with its surroundings.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2016, IV/1; 1229-1241
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hydrothermal Carbonization Kinetics of Lignocellulosic Municipal Solid Waste
Autorzy:
Putra, Herlian Eriska
Djaenudin, Djaenudin
Damanhuri, Enri
Dewi, Kania
Pasek, Ari Darmawan
Powiązania:
https://bibliotekanauki.pl/articles/1839160.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
activation energy
hydrothermal carbonization
lignocellulose
MSW
municipal solid waste
Opis:
Hydrothermal carbonization (HTC) is known as a thermochemical converting of wet biomass into a coal-like solid fuel (hydrochar). Hydrochar is easily crumbled. Because of hydrophobic properties, hydrochar is difficult to degrade by microorganisms. It has a calorific value comparable to lignite coal. In this study, hydrochar was made via converting the organic fraction of municipal solid waste through HTC at 190, 210, and 230°C for 30 min with feed to water ratio (FWR) 0.1, 0.2, 0.3. The feedstock processed includes food waste, paper, and wood waste, represented as a pseudo-component of the organic fraction of MSW. The high heating value (HHV), FTIR, as well as proximate and ultimate analyses were applied both to feedstock and hydrochar. The results showed that the energy density of hydrochar was elevated with increasing HTC temperature. The energy densification ratio and heating value increased by approximately 1.0–1.32 and 30%, respectively compared to raw feedstock. The lower yields of hydrochar were obtained at higher temperature. The typical char yields for lignocellulosic material range between 62–63 wt% at 190 °C and reduce to 54–57 wt% at 230 °C. Furthermore, a preliminary study of kinetic model for lignocellulose decomposition was conducted. This model was based on the mass loss rate of the lignocellulose compound in HTC of MSW. Three first-order reactions were given to illustrate the hydrochar yield at of 190, 210, and 230°C. The activation energy of lignocellulose decomposition was 76.26 kJ/mol, 51.86 kJ/mol, 12,23 kJ/mol for lignin, cellulose, and hemicellulose decomposition, respectively.
Źródło:
Journal of Ecological Engineering; 2021, 22, 3; 188-198
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emission Assessment at the Štěpánovice Municipal Solid Waste Landfill Focusing on Ch4 Emissions
Autorzy:
Adamcová, D.
Vaverková, M.
Břoušková, E.
Powiązania:
https://bibliotekanauki.pl/articles/123605.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
municipal solid waste landfill
landfill gas
Integrated Register of Pollutants
waste
Opis:
The study was conducted to measure the emission from landfill in the years 2005– 2011. The results are used to diagnose the emissions of CH4. The mean value of CH4 in vol. % in the collection wells ranged from 0 to 2.14 vol. % the mean concentration of CH4 in mg/m3 ranged from 0 to 25 251 mg/m3, the average concentration of CH4 in mg/Nm3 at the measuring and control points ranged from 2.2 to 24.1 mg/Nm3. CH4 emissions from the landfill do not exceed the reporting thresholds the landfill does not meet conditions for being included in the Integrated Register of Pollutants.
Źródło:
Journal of Ecological Engineering; 2016, 17, 3; 9-17
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Feasibility of municipal solid waste (MSW) as energy sources for Saudi Arabia’s future Reverse osmosis (RO) desalination plants
Autorzy:
Agboola, P. O.
Saleh, J.
Powiązania:
https://bibliotekanauki.pl/articles/779384.pdf
Data publikacji:
2016
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
municipal solid waste
reverse osmosis
energy content
waste to energy
water
Opis:
The Kingdom of Saudi Arabia (KSA) generates between 1.4–1.75 kg/person/day of Municipal Solid Waste (MSW) that accounts for over 16 million tons of MSW/year. The solid waste collected from different sources is dumped in landfills, thereby creating environmental concerns. In this paper, the potential of solid waste as an energy source (Waste to Energy (WTE)) for Reverse Osmosis (RO) water purification was evaluated. The KSA is known for its acute fresh water shortages and uses desalination technology in meeting its daily water requirements; a process that is energy intensive. The evaluation of the energy content of MSW shows a potential to produce about 927 MW in 2015, based on a total mass burn, and about 1,692 MW in 2032. The MSW-WTE plants can produce about 1.5% of the targeted 120 GW of energy for 2032. For the R.O system, it will give approximately 16.8% of the daily fresh water needed for total mass burn and 2.4% with the recycling option.
Źródło:
Polish Journal of Chemical Technology; 2016, 18, 4; 82-89
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A MILP Model for the Municipal Solid Waste Selective Collection Routing Problem
Autorzy:
Korcyl, Antoni
Książek, Roger
Gdowska, Katarzyna
Powiązania:
https://bibliotekanauki.pl/articles/375950.pdf
Data publikacji:
2019
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
municipal solid waste collection system
solid waste segregated collection
MILP
rich VRP
Solid Waste Management
Opis:
Nowadays, selective solid waste management in the European Union belongs to important responsibilities of municipalities. In Solid Waste Management (SWM) the main operational task is to set a schedule for solid waste collection and to find optimal routes for garbage trucks, so that the total costs of the solid waste collection service can be minimized, subject to a series of constraints which not only guarantee the fulfillment of the SWM’s obligations but also ensure the desirable quality level of that service. The optimization in garbage truck routing belongs to so called rich Vehicle Routing Problems as it aims to cover the following constraints: pickup nodes (clients) must be visited during their predefined time windows; the number and capacity of depots and specialized sorting units cannot be exceeded; each garbage truck can be assigned to at most one depot; each route should be dedicated to collecting one type of segregated solid waste, and the route must be served by a garbage truck which can collect that type of solid waste; the availability of garbage trucks and their drivers must be respected; each garbage truck must be drained at a specialized sorting unit before going back to the depot. This paper contributes a newly developed Mixed-Integer Programming (MIP) model for the Municipal Solid Waste Selective Collection Routing Problem (MSWSCRP) with time windows, limited heterogeneous fleet, and different types of segregated solid waste to be collected separately. Results obtained for solving small-sized instance of the MSWSCRP are reported.
Źródło:
Decision Making in Manufacturing and Services; 2019, 13, 1-2; 17-35
1896-8325
2300-7087
Pojawia się w:
Decision Making in Manufacturing and Services
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of segregated waste accumulation efficiency in selected suburban communities
Autorzy:
Malinowski, M.
Kopytko, A.M.
Powiązania:
https://bibliotekanauki.pl/articles/61721.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
assessment
waste management
municipal solid waste
segregated waste
accumulation efficiency
suburban community
Opis:
Among solid wastes one may distinguish mixed wastes, segregated wastes (collected selectively) and biodegradable wastes originating from open-air markets, green areas or cemeteries. Mixed wastes have constituted the largest proportion in the stream of municipal solid waste (MSW), both before and after the changes in waste management system in Poland introduced on 1 July 2013. The other group, regarding the collected wastes volume, is so-called segregation. It has been forecasted that in the nearest future the amount of segregated wastes will be successively growing. The article presents the analysis of selectively collected wastes (paper, plastics, glass and metal) indicators from lower administrative units of Liszki and Mogilany communities. The degree of segregated wastes accumulation efficiency was assessed on the basis of conducted computation. The communities selected for the analysis are suburban municipalities, situated in the area of Krakow agglomeration in the immediate vicinity of the main city of the Malopolskie voivodeship. The main aim of the work was an assessment of selective accumulation of municipal solid wastes in suburban communities. Values of quantitative indices, characterizing mixed and segregated municipal solid waste generated by the inhabitants of individual lower administrative units of the studied communities were subjected to a detailed analysis. The data assumed for the investigations cover the period from July 2012 to June 2013. As results from conducted analyses actual indices of wastes accumulation differ from the indices determined on the basis of statistical data and the data stated in the Waste Management Plans, which may evidence a high ecological awareness of the analysed areas inhabitants. The efficiency of selective waste accumulation in the analysed communities was on a similar level and exceeded 20%, i.e. was twice higher than the average for Poland.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2014, IV/3
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy Content Estimation of Municipal Solid Waste by Physical Composition in Al-Diwaniyah City, Iraq
Autorzy:
Janna, Hussein
Abbas, Mukhtar D.
Al-Khuzaie, Marwah M.
Al-Ansari, Nadhir
Powiązania:
https://bibliotekanauki.pl/articles/1955420.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
municipal solid waste
energy content
high heating value model
waste characterization
landfilling
Opis:
This study was undertaken to estimate the energy potential of municipal solid waste via creating a relationship between the high heating value (HHV) and the fractions of physical composition of municipal solid waste MSW (% food, % plastic, % paper, % wood, % textile) into the two scenarios, namely wet MSW (as discarded) and dry (free moisture). The created models were determined based on the results of obtained from the analysis of the components of the Al-Diwaniyah MSW and then from previous studies which involved experimental ultimate analysis (% C, % O, % H, % N, %S) of MSW, supported by the equations and models of previous studies which were used for HHV calculation. SPSS Statistical software was used to prepare the models. For each scenario, the input datasets were 60 cases, taking into account the minimization of the data and the average of HHV that result from equations. Four models were created, two models for each status where R2 was 1.00 and 0.999 for dry and wet situation, respectively. However, the equations of verification process showed that the models which depended on the dry fractions are more accurate. The produced HHV from the dry and wet MSW components in the Al-Diwaniyah City is 8655 KJ/Kg and 6440 KJ/Kg, respectively (as discarded).
Źródło:
Journal of Ecological Engineering; 2021, 22, 7; 11-19
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the use of EWA bioreactor in the process of biodrying of undersize fraction manufactured from mixed municipal solid waste
Autorzy:
Hurka, M.
Malinowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/61276.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
assessment
EWA bioreactor
bioreactor
drying process
biodrying
municipal solid waste
waste treatment
Opis:
The article presents the results of a research on the processing of undersize fraction, extracted from a stream of mixed municipal solid waste (MSW), into alternative fuel, in the process of bio-drying. The analysis was conducted with the use of an innovative EWA (Ecological Waste Apparatus) bioreactor adapted to carrying out aerobic treatment of waste in such processes as: composting, aerobic digestion/stabilization and bio-drying of waste. EWA bioreactors have been designed and manufactured by AGRO-EKO spol. s r.o. from the Czech Republic. The subject matter of the analysis was undersize fraction, with particle dimensions ranging from 0 to 50 mm, manufactured in the process of sorting (mechanical processing) of MSW. The main aim of the research was to assess suitability of the use of EWA bioreactor in the process of alternative fuel production from undersize fraction developed from municipal waste (in the process of accelerated bio-drying). Samples were collected between 2011 and 2012. The undersize fraction and the produced alternative fuel were analysed by AGRO-EKO spol. s r.o. and at the University of Agriculture in Krakow, in accordance with the standards for wastes and solid fuels. It has been concluded that undersize fraction produced from mixed municipal waste might be the energy source for cement plants or commercial power plants. As a result of a 66-hour accelerated process of bio-drying of undersize fraction (the standard time being ca. 7 days), the waste-mass has been lowered by reducing water content (moisture) in undersize fraction by ca. 15 % while increasing its calorific value and the C:N ratio. The process resulted in the increase of non-combustible and non-biodegradable elements. The high C:N ratio and the amount of organic substances at the level of 78 % should enable further aerobic and anaerobic stabilization preceded by substance moisturizing.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2014, IV/1
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odpady komunalne powstające na nieruchomościach niezamieszkałych. Problematyka prawna
Municipal Waste Produced on Uninhabited Properties. Legal Issues
Autorzy:
Dudzik, Sławomir
Rumak, Ewelina
Powiązania:
https://bibliotekanauki.pl/articles/1046795.pdf
Data publikacji:
2019-09-30
Wydawca:
Katolicki Uniwersytet Lubelski Jana Pawła II
Tematy:
odpady komunalne
gospodarka odpadami
nieruchomości niezamieszkałe
municipal solid waste
solid waste management
uninhabited property
Opis:
Celem artykułu jest określenie granic pojęcia prawnego „odpady komunalne” w odniesieniu do odpadów powstających na nieruchomościach niezamieszkałych, tj. poza gospodarstwami domowymi. Wyznaczenie tych granic ma istotne znaczenie dla zadań i kompetencji gmin w zakresie gospodarki odpadami. Determinuje m.in. zakres przedmiotowy aktów prawa miejscowego w sprawie odbieraniu odpadów komunalnych od właścicieli nieruchomości, a w konsekwencji także zakres organizowanych w tej sferze przez organy gminy przetargów. Autorzy opowiadają się za szerokim ujęciem analizowanego pojęcia, uzasadnionym zarówno brzmieniem odnośnych przepisów, jak i wymogami efektywnej gospodarki odpadami, za którą odpowiedzialność ponosi gmina. Zagadnienie stanowiące przedmiot artykułu jest analizowane z uwzględnieniem zarówno polskich, jak i unijnych regulacji prawnych oraz orzecznictwa.
The aim of the article is to define the boundaries of the legal notion of ‘municipal solid waste’ with respect to solid waste produced in uninhabited property, i.e. outside households. Setting of those boundaries has a significant meaning for tasks and competences of municipalities in the area of solid waste management. It determines, inter alia, the material scope of local legal acts concerning collection of solid waste from property owners, and in consequence, also the extent of tenders organised in this field by the municipal authorities. The authors advocate a broad understanding of the analysed notion, justified by the wording of the relevant legal provisions and the effectiveness of the solid waste management for which municipalities are responsible. The subjectmatter of the article is analysed in the light of both the Polish and EU legal regulations and jurisprudence.
Źródło:
Studia Prawnicze KUL; 2019, 3; 69-90
1897-7146
2719-4264
Pojawia się w:
Studia Prawnicze KUL
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Municipal Solid Waste Landfill Leachate Treatment by Phragmites australis, Typha latifolia and Scirpus validus through Constructed Wetlands
Autorzy:
Sial, Taufique Ahmed
Teewno, Abdul Majid
Memon, Sheeraz Ahmed
Mahar, Rasool Bux
Korai, M. Safar
Powiązania:
https://bibliotekanauki.pl/articles/24202906.pdf
Data publikacji:
2023
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
MSW
municipal solid waste
landfill leachate
contamination
CWs
phytoremediation
macrophytes
sustainability
Opis:
A sustainable performance evaluation of pilot-scale was carried through horizontal sub-surface Constructed Wetlands system for treating the leachate from constructed Municipal Solid Waste Landfill at Institute of Environmental Engineering and Management, Mehran University of Engineering and Technology Jamshoro. The CWs were planted with Phragmites australis, Typha latifolia and Scirpus validus with sand and gravel. The leachate had been treated with two different cycles, first cycle was performed in the winter season whereas second cycle in summer, to differentiate the performance with seasonal variation. Chemical parameters of leachate pH, Biological Oxygen Demand (BOD), Chemical Oxygen Demand (COD), Total Suspended Solids TSS, Ammonia-nitrogen (NH3-N), Nitrate-nitrogen (NO3-N), Total Phosphate PO43- (TP) and heavy metals, Lead (Pb) and Copper (Cu) were tested with intervals of certain weeks. The tests result showed that all parameters experienced a considerable reduction in their concentrations. Significant reduction efficiencies were recorded for parameters, BOD with 53–82%, COD with 32–46%, TSS with 59–75%, NH3-N with 90–92%, NO3-N with 85–87%, and TP with 48–64%, and heavy metals Pb and Cu with 28–48% respectively in four weeks of the first cycle by all three plants. Whereas, in the second cycle, the removal efficiencies of BOD 78–93%, COD 63–76%, TSS 52–83%, NH3-N 90–91% and NO3-N 91–92% and heavy metals Pb and Cu with 21–58% respectively in five weeks were observed by all three plants. Along with the experimentation, United Nations Sustainable Development Goals UN SDGs are also highlighted. This study helps achieving tremendous SDGs accompanying treatment of leachate.
Źródło:
Journal of Ecological Engineering; 2023, 24, 6; 303--314
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies