Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "modelowanie numeryczne 3D" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
Subsoil movements forecasting using 3D numerical modeling
Prognozowanie przemieszczeń podłoża gruntowego z wykorzystaniem modelowania numerycznego 3D
Autorzy:
Michalak, Hanna
Przybysz, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/1853641.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
przemieszczenie gruntu
modelowanie numeryczne 3D
kalibracja
osiadanie budynku
posadowienie głębokie
podziemie wielokondygnacyjne
soil displacement
3D numerical modelling
calibration
building subsidence
deep foundation
multi-storey underground
Opis:
The design of new investments with underground floors in the downtown urban fabric calls for determining its impact on existing, often historic, neighboring facilities. The article presents the results of own research on 3D spatial arrangement numerical modeling of this type of investment. The scope of the research includes the analysis of neighboring buildings (including historic buildings), construction of the 3D numerical model, and calibration of the subsoil model taking into account the actual results of geodetic measurements. Own research as well as the completed housing development complex in Poland, downtown Warsaw, including data from project design and implementation documentation serve as the basis for research and analysis. As a result of said research and analysis, it was found that 3D computational models allow mapping of actual impacts within the designed new buildings and neighboring buildings, and as consequence - after appropriate calibration - a good reflection of soil displacements in the area of the planned investment. The knowledge of the anticipated values of soil displacements related to erecting new buildings is necessary at the design and implementation stages to ensure safety in all phases of works of existing buildings.
Projektowanie nowych inwestycji z kondygnacjami podziemnymi w śródmiejskiej tkance miejskiej wymaga określenia jej oddziaływania na istniejące, często zabytkowe, obiekty sąsiednie. W artykule przedstawiono wyniki badań własnych dotyczących modelowania numerycznego w układzie przestrzennym 3D tego rodzaju inwestycji. Zakres badań obejmuje, analizę sąsiedniej zabudowy (w tym zabudowy zabytkowej), budowę modelu numerycznego 3D, kalibrację modelu podłoża gruntowego przy uwzględnieniu rzeczywistych wyników pomiarów geodezyjnych. Podstawę badań i analiz stanowi przykład zrealizowanego zespołu zabudowy mieszkaniowej w śródmieściu Warszawy uwzględniający dane z dokumentacji projektowej i realizacyjnej inwestycji oraz doświadczenia własne. Do modelowania podłoża gruntowego układów „podłoże gruntowe - nowy kompleks budynków A, B i C - zabudowa sąsiednia” przyjęto parametry geotechniczne z dokumentacji technicznej obiektu, fazy prac wynikające z rzeczywistych etapów realizacji inwestycji. Wartości obciążeń od budynków, sposób i miejsca ich przyłożenia określono na podstawie analizy dokumentacji projektowej oraz doświadczeń własnych. Przestrzenny model numeryczny zbudowano w programie ZSoil 2016. Model odwzorowuje obszar o wymiarach 240 × 150 m. Podłoże gruntowe pod budynkami zamodelowano do głębokości 30 m poniżej poziomu terenu z wykorzystaniem modelu podłoża Mohra-Coulomba. W ramach kalibracji modelu podłoża gruntowego prowadzono wielokrotne symulacje komputerowe i analizowano uzyskiwane wyniki w zakresie przemieszczeń, a także integralności modelu. Kalibracja polegała na zwiększaniu wartości modułu odkształcenia pierwotnego gruntu znajdującego się na głębokościach poniżej poziomu rozpoznania w dokumentacji geotechnicznej.
Źródło:
Archives of Civil Engineering; 2021, 67, 1; 367-385
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Risk assessment of open pit lake using in situ observations and advanced numerical modelling - application on Most lake
Ocena ryzyka dla pokopalnianego zbiornika wodnego z wykorzystaniem obserwacji in situ i zaawansowanego modelowania numerycznego - przykład jeziora Most
Autorzy:
Renaud, Vincent
Al Heib, Marwan
Burda, Jan
Powiązania:
https://bibliotekanauki.pl/articles/2175664.pdf
Data publikacji:
2022
Wydawca:
Poltegor-Instytut Instytut Górnictwa Odkrywkowego
Tematy:
mining hazards
mining lake
slope stability
risk assessment
LiDAR
3D numerical modelling
zagrożenia górnicze
jezioro pogórnicze
stateczność skarp
ocena ryzyka
modelowanie numeryczne 3D
Opis:
Almost all post-exploitation open pit mines in the world are shaped as a final reservoir intended to be filled with water. In Europe, the creation of water lakes is the most common way of reclaiming post open pit mines. The safety and the security of mine lakes is one of the mine regions priorities. Several hazards related to mine activities should be assessed. Qualitative and quantitative approaches were suggested based on the existing data. One of the main hazards identified is the slope stability of lake banks. To develop a reliability methodology for assessing the long-term stability of flooded open pit mines, a large-scale numerical model of the lake was carried out and was applied on lake Most, which is one of the largest mining lakes in Europe (Czech Republic). The large-scale numerical model was built, based on site observations, large-scale LiDAR data and geotechnical data. The results highlighted the reliability of the methodology to combine the geometric model with the geological model to create a large-scale numerical model, and to identify local potentially instable zones..
Niemal wszystkie poeksploatacyjne wyrobiska odkrywkowe na świecie są ukształtowane jako wyrobiska końcowe przeznaczone do napełnienia wodą. W Europie tworzenie zbiorników wodnych jest najpowszechniejszym sposobem rekultywacji kopalń odkrywkowych. Bezpieczeństwo i ochrona jezior pokopalnianych jest jednym z priorytetów regionów górniczych. Należy dokonać oceny kilku zagrożeń związanych z działalnością górniczą. Na podstawie istniejących danych zaproponowano podejście jakościowe i ilościowe. Jednym z głównych zidentyfikowanych zagrożeń jest stabilność zboczy wzdłuż brzegów jezior. W celu opracowania metodologii długoterminowej oceny stabilności zalanych kopalń odkrywkowych wykonano wielkoskalowy model numeryczny jeziora i zastosowano go na jeziorze Most, które jest jednym z największych jezior pogórniczych w Europie (Czechy). W oparciu o obserwacje terenowe, wielkoskalowe dane LiDAR oraz dane geotechniczne zbudowano wielkoskalowy model numeryczny. Wyniki podkreśliły wiarygodność metodologii łączenia modelu geometrycznego z modelem geologicznym w celu stworzenia wielkoskalowego modelu numerycznego oraz identyfikacji lokalnych potencjalnie niestabilnych stref.
Źródło:
Górnictwo Odkrywkowe; 2022, 63, 4; 16--22
0043-2075
Pojawia się w:
Górnictwo Odkrywkowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problematyka projektowania i badania regularnych struktur komórkowych wytwarzanych technologiami przyrostowymi
Key Issues of Design and Investigations on Additive Manufactured Regular Cellular Structures
Autorzy:
Janiszewski, J.
Płatek, P.
Dziewit, P.
Sarzyńska, K.
Powiązania:
https://bibliotekanauki.pl/articles/403867.pdf
Data publikacji:
2018
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
materiały komórkowe
energochłonność
druk 3D
modelowanie numeryczne
technika dzielonego pręta Hopkinsona
cellular materials
crashworthiness
3D printing
numerical investigations
Split Hopkinson Pressure Bar
Opis:
Celem niniejszej pracy jest przedstawienie wybranych aspektów związanych z projektowaniem i badaniem energochłonnych regularnych struktur komórkowych typu 2D wykonanych za pomocą addytywnych technik wytwarzania. Zaproponowana przez autorów metodyka badawcza obejmowała wytwarzanie struktur za pomocą dwóch technik druku 3D zróżnicowanych pod względem technologicznym i możliwości wytwórczych. Metoda FDM (ang. Fused Deposition Modelling) pozwoliła na przeanalizowanie procesu deformacji szerokiego spektrum topologii w zakresie obciążenia quasi-statycznego i udarowego. Z kolei metoda LENS (ang. Laser Engineered Net Shaping) umożliwiła wykonanie struktur ze stopu tytanu Ti6Al4V charakteryzującego się wysoką wytrzymałością mechaniczną. W pracy przedstawiono najważniejsze problemy związane z procesem badania regularnych struktur komórkowych w różnych warunkach obciążenia, w szczególności w warunkach dynamicznego odkształcenia z wykorzystaniem techniki dzielonego pręta Hopkinsona (SHPB). Przedstawiono główne zagadnienia związane z budową stanowiska SHPB oraz opisano specyfikę badania struktur komórkowych w klasycznym układzie prętów Hopkinsona i w układzie tzw. bezpośredniego uderzenia. Ponadto, dokonano obszernego omówienia problematyki modelowania numerycznego deformacji struktur komórkowych, ze szczególnym uwzględnieniem definicji założeń koniecznych do poprawnego ich zamodelowania.
The aim of this paper is to present main issues concerning designing and investigation on 2D regular cellular structures produced using additive manufacturing techniques. Proposed by authors experimental methodology was based on two types of technologically different 3D printings methods with various manufacturing capabilities. FDM (Fused Deposition Modelling) technique allowed to analyze wide spectrum of structure topologies under static and impact loading conditions. LENS (Laser Engineered Net Shaping) method enabled to produce high strength structures made of titanium alloy Ti6Al4V. This paper presents the most important issues related to the testing process of the regular cellular structures under various loading conditions, in particular under dynamic deformation using the split Hopkinson pressure bar technique (SHPB). The main issues concerning the construction of SHPB experimental setup were presented as well as the specificity of the research methodology on cellular materials in two different Hopkinson bar systems: classic and so-called direct impact. In addition, the extensive discussions on numerical modelling of cellular structures deformation was made. In particular, the emphasis of assumptions necessary for their correct modelling was defined.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2018, 9, 3 (33); 29-56
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimisation of selected parameters of the shield support base dedicated for the condition of a weak floor
Autorzy:
Rajwa, Sylwester
Bock, Sven
Powiązania:
https://bibliotekanauki.pl/articles/2203341.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
modelowanie numeryczne
eksploatacja węgla
podpora hydrauliczna
numerical modelling
PFC3D
shield support
longwall mining
Opis:
In longwall coal exploitation, problems with the proper functioning of the powered shield support often occur. In many cases, it results from the insufficient load-bearing capacity of the ground (floor) and the inability to achieve the set or yield pressure of the shield support. The improper functioning of the shield support may also result from its construction and the lack of optimisation to work effectively on a weak mine floor. This paper presents an attempt to optimise the operating conditions of the base of two-legged shield support based on the field observations and results of the PFC3D numerical calculation. In the framework of the numerical calculations, the impact of the width of the base and the location of the hydraulic legs on the working conditions of shield support on a weak floor were analysed.
Źródło:
Archives of Mining Sciences; 2022, 67, 3; 509--529
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New open-source ANSYS-SolidWorks-FLAC3D geometry conversion programs
Autorzy:
Bock, S.
Powiązania:
https://bibliotekanauki.pl/articles/91921.pdf
Data publikacji:
2015
Wydawca:
Główny Instytut Górnictwa
Tematy:
numerical modelling
material modelling
mesh design
geometry converter
FDM
FLAC3D
modelowanie numeryczne
modelowanie materiałów
Opis:
Numerical calculations are used increasingly often to obtain a stress-strain state in many engineering problems. A popular program for this type of calculation which makes use of the finite difference method (a continuous method) is Itasca's FLAC3D. However, an important limitation of FLAC3D is the difficulty of geometry creation. This paper presents new open-source programs allowing the preparation of numerical models in a third-party software (ANSYS, SolidWorks) and their conversion to internal FLAC3D geometry files. The converters have been written in BASH-scripting language and published under the terms of the GNU General Public License, which allows the free distribution and/or modification of the software with some limitations.
Źródło:
Journal of Sustainable Mining; 2015, 14, 3; 124-132
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the anhydrite interbeds on a stability of the storage caverns in the Mechelinki salt deposit (Northern Poland)
Wpływ wkładek anhydrytowych na stateczność kawern magazynowych w złożu soli kamiennej Mechelinki (Północna Polska)
Autorzy:
Cała, M.
Cyran, K.
Kowalski, M.
Wilkosz, P.
Powiązania:
https://bibliotekanauki.pl/articles/219251.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
kawerny magazynowe
analiza stateczności
wkładki anhydrytowe
modelowanie numeryczne 3D
storage caverns
stability analysis
anhydrite interbeds
3D numerical modelling
Opis:
This paper presents a complex study of anhydrite interbeds influence on the cavern stability in the Mechelinki salt deposit. The impact of interbeds on the cavern shape and the stress concentrations were also considered. The stability analysis was based on the 3D numerical modelling. Numerical simulations were performed with use of the Finite Difference Method (FDM) and the FLAC3D v. 6.00 software. The numerical model in a cuboidal shape and the following dimensions: length 1400, width 1400, height 1400 m, comprised the part of the Mechelinki salt deposit. Three (K-6, K-8, K-9) caverns were projected inside this model. The mesh of the numerical model contained about 15 million tetrahedral elements. The occurrence of anhydrite interbeds within the rock salt beds had contributed to the reduction in a diameter and irregular shape of the analysed caverns. The results of the 3D numerical modelling had indicated that the contact area between the rock salt beds and the anhydrite interbeds is likely to the occurrence of displacements. Irregularities in a shape of the analysed caverns are prone to the stress concentration. However, the stability of the analysed caverns are not expected to be affected in the assumed operation conditions and time period (9.5 years).
W artykule przedstawiono kompleksowe studium wpływu wkładek anhydrytowych na stateczność kawern magazynowych w złożu soli kamiennej Mechelinki. Rozważany był także wpływ wkładek anhydrytowych na kształt kawern magazynowych i koncentrację naprężeń. Analizę stateczności przeprowadzono z wykorzystaniem metod modelowania numerycznego. W symulacjach numerycznych została zastosowana metoda różnic skończonych i program FLAC3D v. 6.00. W celu wykonania symulacji numerycznych zbudowano model numeryczny analizowanego obszaru. Model numeryczny w kształcie sześcianu i wymiarach 1400 × 1400 × 1400 m obejmował część złoża Mechelinki oraz trzy kawerny magazynowe (K-6, K-8, K-9). Siatka modelu składała się z 15 milionów teraedrycznych elementów. Występowanie wkładek anhydrytowych w obrębie pokładu soli kamiennej przyczyniło się do redukcji średnicy i nieregularności kształtu analizowanych kawern magazynowych. Wyniki modelowania numerycznego 3D wykazały, że strefy kontaktu pomiędzy warstwami soli kamiennej i wkładkami anhydrytowymi są podatne na występowanie przemieszczeń. Ponadto, obszary koncentracji naprężeń są związane z nieregularnością kształtu komór magazynowych. Symulacje numeryczne wykazały, że stateczność analizowanych komór w przyjętych warunkach eksploatacji i analizowanym 9.5-letnim okresie nie zostanie naruszona.
Źródło:
Archives of Mining Sciences; 2018, 63, 4; 1007-1025
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital materials – evaluation of the possibilities of using selected hyperelastic models to describe constitutive relations
Autorzy:
Mańkowski, J.
Lipnicki, J.
Powiązania:
https://bibliotekanauki.pl/articles/265437.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
digital materials
hyperelastic
identification of models
FEM
3D printing
PolyJet Matrix technology
materiały cyfrowe
drukarka 3D
modelowanie numeryczne
Opis:
The authors tried to identify the parameters of numerical models of digital materials, which are a kind of composite resulting from the manufacture of the product in 3D printers. With the arrangement of several heads of the printer, the new material can result from mixing of materials with radically different properties, during the process of producing single layer of the product. The new material has properties dependent on the base materials properties and their proportions. Digital materials tensile characteristics are often non-linear and qualify to be described by hyperelastic materials models. The identification was conducted based on the results of tensile tests models, its various degrees coefficients of the polynomials to various degrees coefficients of the polynomials. The Drucker’s stability criterion was also examined. Fourteen different materials were analyzed.
Źródło:
International Journal of Applied Mechanics and Engineering; 2017, 22, 3; 601-612
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies