Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "micropowder" wg kryterium: Temat


Wyświetlanie 1-3 z 3
Tytuł:
Photochemical Conversion of CO₂ into Methyl Alcohol Using SiC Micropowder under UV Light
Autorzy:
Azzouz, F.
Kaci, S.
Bozetine, I.
Keffous, A.
Trari, M.
Belhousse, S.
Aissiou-Bouanik, S.
Powiązania:
https://bibliotekanauki.pl/articles/1031493.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
SiC micropowder
CO₂ photoreduction
methanol
Opis:
In our study, microparticles SiC powder was investigated as a catalyst for CO₂ photoreduction into methanol under UV light. The photochemical conversion of methanol was studied as function of time of exposition, the concentration and the grain size of the catalyst. The selectivity of the used catalyst to promote methanol formation was noticed. It was noticed also that the grain size and concentration have a great impact on the photochemical conversion of CO₂ to methanol. The best yield of methanol was achieved when a concentration of 0.75 M of SiC powder of 17 μm grain size and an exposure time to UV light of 2 h where assured. Maximum molar concentration of methanol achieved was under UV irradiation of 365 nm. Therefore, the catalytic property of silicon carbide has proved its efficiency in the photochemical conversion of CO₂ into alcohol thus far under UV light.
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 479-483
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combined Effect of CrB2 Micropowder and VN Nanopowder on the Strength and Wear Re-sistance of Fe‒Cu–Ni–Sn Matrix Diamond Composites
Autorzy:
Ratov, Boranbay
Mechnik, Volodymyr
Rucki, Miroslaw
Gevorkyan, Edwin
Kilikevicius, Arturas
Kolodnitskyi, Vasyl
Siemiatkowski, Zbigniew
Umirova, Gulzada
Chałko, Leszek
Józwik, Jerzy
Zhanggirkhanova, Arailym
Chishkala, Vladimir
Korostyshevskyi, Dmytro
Powiązania:
https://bibliotekanauki.pl/articles/2201897.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
diamond composite
electroconsolidation
composite microstructure
adhesion
CrB2
VN nanopowder
micropowder
VN
wear resistance
cutting tools
mining tools
Opis:
The paper presents research results on the enhancement of diamond composites designed for tools application for mining industry, hard rocks cutting, able to withstand harsh conditions under heavy dynamical loads. In the present study, both CrB2 micropowder and VN nanopowder additives were used in proportions up to 5 wt.% and 6 wt.%, respectively, together with the basic matrix composition of 51 wt.% Fe, 32 wt.% Cu, 9 wt.% Ni, and 8 wt.% Sn. Addition of both components, CrB2 and VN, appeared to be ad-vantageous in proportion of 2 wt.% and 4 wt.%, respectively. This composition exhibited the highest relative density of 0.9968, better than that without additives. Similarly, the highest values of compressive strength Rcm and flexural strength Rbm were reached for the composite with the same percentage of CrB2 and VN. Compared to the composite with no addition of CrB2 and VN, Rcm improved by almost 70%, while Rbm by 81%. Additionally, the abovementioned additives enhanced the ability of the matrix to prevent the diamond reinforcement from being torn out of the composite, which is very important under harsh working conditions of the cutting tools. The presence of CrB2 micropowder and VN nanopowder promoted densification of the matrix and adhesion between the diamond grits and the Fe‒Cu–Ni–Sn matrix.
Źródło:
Advances in Science and Technology. Research Journal; 2023, 17, 1; 23--34
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of Weldability of Hot-Dip Galvanized Steel by Anti-Galvanizing Coating with Si-Fe-Al Oxide-Based Micropowder
Autorzy:
So, Seong-Min
Kim, Ki-Yeon
Park, Il-Song
Lee, Seok-Jae
Yoo, Dong-Jin
Kim, Yeon-Won
Oh, Min-Suk
Powiązania:
https://bibliotekanauki.pl/articles/2203718.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
hot-dip galvanizing
anti-galvanizing
oxide micropowder
weldability
Opis:
A Si-Fe-Al ternary oxide-based micropowder coating was used to prevent the formation of a Zn coating on steel during the hot-dip Zn galvanizing process to reduce the welding fume and defects generated during the welding of Zn-galvanized steel. The composition ratio of the oxide powder was optimized and its microstructure and weldability were evaluated. The optimized oxide coating was stable in the hot-dip galvanizing bath at 470°C and effectively inhibited the formation of Zn coating. The Zn residue could be easily removed with simple mechanical impact. The proposed coating reduced Zn fume and prevented the residual Zn from melting in the weld bead during high-temperature welding, thus reducing the number of welding defects. The results indicated that this pretreatment can simplify the manufacturing process and shorten the process time cost-effectively.
Źródło:
Archives of Metallurgy and Materials; 2023, 68, 1; 155--159
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-3 z 3

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies