Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "microcontroller" wg kryterium: Temat


Tytuł:
Implementation of a hardware trojan chip detector model using arduino microcontroller
Autorzy:
Abdulsalam, Kadeejah
Adebisi, John
Durojaiye, Victor
Powiązania:
https://bibliotekanauki.pl/articles/1956027.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Promocji Wiedzy
Tematy:
hardware trojans
chips
logic test
machine learning
microcontroller
trojan sprzętowy
test logiczny
nauczanie maszynowe
mikrokontroler
Opis:
These days, hardware devices and its associated activities are greatly impacted by threats amidst of various technologies. Hardware trojans are malicious modifications made to the circuitry of an integrated circuit, Exploiting such alterations and accessing the level of damage to devices is considered in this work. These trojans, when present in sensitive hardware system deployment, tends to have potential damage and infection to the system. This research builds a hardware trojan detector using machine learning techniques. The work uses a combination of logic testing and power side-channel analysis (SCA) coupled with machine learning for power traces. The model was trained, validated and tested using the acquired data, for 5 epochs. Preliminary logic tests were conducted on target hardware device as well as power SCA. The designed machine learning model was implemented using Arduino microcontroller and result showed that the hardware trojan detector identifies trojan chips with a reliable accuracy. The power consumption readings of the hardware characteristically start at 1035-1040mW and the power time-series data were simulated using DC power measurements mixed with additive white Gaussian noise (AWGN) with different standard deviations. The model achieves accuracy, precision and accurate recall values. Setting the threshold proba-bility for the trojan class less than 0.5 however increases the recall, which is the most important metric for overall accuracy acheivement of over 95 percent after several epochs of training.
Źródło:
Applied Computer Science; 2021, 17, 4; 20-33
1895-3735
Pojawia się w:
Applied Computer Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Estimation of the equality of the beamless sucker-rod oil pumping unit by the value of the consumption current
Oszacowanie wyważenia zespołu pomp żerdziowych bez żurawia na podstawie wartości zużywanego prądu
Autorzy:
Ahmedov, Beyali
Hajiyev, Anar
Mustafayev, Vugar
Powiązania:
https://bibliotekanauki.pl/articles/2143562.pdf
Data publikacji:
2021
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
mechanical drive
sucker rod pump
unit
rocking machine
transforming mechanism
balancing
movable
counterweight
cyclic load
rod suspension point
beam
engine
gearbox
microcontroller
mechaniczny napęd
pompa żerdziowa
zespół
kiwon
mechanizm
przekształcenie
wyważanie
przesuwna przeciwwaga
cykliczne obciążenie
punkt zawieszenia żerdzi
żuraw
silnik
skrzynia biegów
mikrokontroler
Opis:
W artykule przedstawiono wyniki badań eksperymentalnych dotyczących oceny obciążenia i wyważania nowego rozwiązania konstrukcyjnego zespołów pomp żerdziowych bez żurawia. Należy zauważyć, że kluczowym czynnikiem, mającym największy wpływ na średni czas pomiędzy awariami (MTBF), jest właściwe wyważenie zespołu pompowego. Głównym celem urządzenia do wyważania jest akumulacja energii potencjalnej podczas ruchu żerdzi w dół i jej uwolnienie podczas jej ruchu w górę. Udowodniono, że proponowany dodatkowy system wyważania (przesuwna przeciwwaga), który pomaga zmniejszyć nierównomierne obciążenie silnika elektrycznego i pobór mocy zespołu pompowego, zwiększy również wydajność zespołu pompy żerdziowej bez żurawia. Stwierdzono, że straty mocy żerdziowych pomp ssących zależą od stopnia wyważenia przeciwwag. Straty mocy spowodowane niewyważeniem mogą zostać zignorowane, jeżeli współczynnik niewyważenia urządzenia mieści się w zakresie od −5% do +5%. W niniejszym artykule autorzy proponują technikę pozwalającą na wyznaczenie charakterystyk energetycznych napędu elektrycznego zespołu pompowego w warunkach cyklicznie zmieniającego się obciążenia i niedostatecznego wyważenia. Okazało się, że kiedy głowica wyrównywacza przechodzi z ruchu w górę do ruchu w dół i odwrotnie, to występują odcinki z ujemną wartością momentu obrotowego, co wytłumaczono wpływem sił bezwładności poruszających się ciężarów. W skrajnych położeniach korb prowadzi to do wstrząsów w przekładni redukcyjnej, zwiększonego zużycia, a nawet do wyłamania zębów. Ponieważ nie jest możliwe całkowite wyeliminowanie tego zjawiska, należy dążyć do ograniczenia wartości ujemnego momentu obrotowego poprzez prawidłowe wyważenie pompy żerdziowej. We wszystkich przypadkach zmiana trybu pracy nowego rozwiązania konstrukcyjnego zespołu pompowego bez żurawia wymaga przeprowadzenia nowych obliczeń oraz zmiany położenia i masy przesuwnych i obrotowych przeciwwag (z wyważeniem łączonym).
The article presents the results of experimental studies to assess the loading and balancing of a new constructive solution of beamless sucker-rod pumping units. It is noted that the key factor that has the most significant effect on the mean time between failures (MTBF) is the right balancing of the pumping unit. The main purpose of the balancing device is the accumulation of potential energy during the downstroke and its release during the upstroke of the rod. It has been proved that the proposed additional balancing system (movable counterweight) which helps to reduce the uneven load on the electric motor and the power consumption of the pumping unit will also increase the efficiency of the beamless sucker-rod pumping unit. It was found that losses in sucker-rod pumps depend on the degree of balance of the counterweights. If the unbalance coefficient of the equipment is in the range from –5 to +5%, then the power loss due to unbalance can be ignored. In the current article, the authors propose a technique that allows to determine the energy characteristics of the electric drive of the pumping unit under conditions of a cyclically changing load and insufficient balance. It was revealed that when the balancer head passes from the upstroke to the downstroke and vice versa, there are sections with a negative value of the torque, which is explained by the influence of the inertial forces of the moving masses. This leads to shocks in the gearing of the reducer at the extreme positions of the cranks, increased wear and possibly to breakage of the teeth. Since it is not possible to completely eliminate this phenomenon, one should strive to limit the value of the negative torque by the correct balancing of the sucker-rod pump. In all cases, the change in the operating mode of a new constructive solution of beamless pumping unit requires new calculations, and requires changing the position and weights of movable and rotary counterweights (with combined balancing).
Źródło:
Nafta-Gaz; 2021, 77, 9; 571-578
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Generator liczb losowych wykorzystujący mikrokontroler ATMEGA16
Random number generator leverage a microcontroller ATMEGA16
Autorzy:
Ambroziak, D.
Dąbkowski, M.
Redlarski, G.
Powiązania:
https://bibliotekanauki.pl/articles/268752.pdf
Data publikacji:
2012
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
generator liczb losowych
mikrokontroler Atmega16
generatory liczb losowych
random number generator
microcontroller Atmega16
randomness
Opis:
Istotę artykułu stanowi opis rozwiązania problemu dotyczącego syntezy generatorów liczb losowych: fizycznych oraz komputerowych - programowych, bazujących na układach scalonych wykorzystujących moduł mikrokontrolera serii Atmega16. Z tego względu we wstępie przedstawiono genezę, zastosowanie oraz rodzaje generatorów liczb losowych, natomiast w dalszej części artykułu opisano przykładowe generatory liczb quasi-losowych. Następnie zaprezentowano istotę podjętego problemu oraz propozycję jego rozwiązania. Na zakończenie przedstawiono krótkie podsumowanie oraz podano najważniejsze wnioski.
The purpose of this publication is to provide a solution to the problem of synthesis of physical and computer random number generators based on a simple integrated circuit leveraging Atmega16 microcontroller. Article in the introduction presents the origins, application and types of random number generators. Later in this paper are presented examples of pseudorandom numbers generators. Another part of this publication is accurate to look at the problem and its solution method. Article ends with a summary presenting the final conclusions of this work.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2012, 31; 23-26
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The study of Arduino UNO feasibility for DAQ purposes
Studium przydatności platformy Arduino dla celów akwizycji danych
Autorzy:
Barański, Robert
Galewski, Marek A.
Nitkiewicz, Szymon
Powiązania:
https://bibliotekanauki.pl/articles/329446.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
microcontroller
Arduino
ATmega
monitoring
data acquisition
signal analysis
mikrokontroler
pozyskiwanie danych
analiza sygnału
Opis:
Using microcontroller systems becomes a routine in various measurement and control tasks. Their wide availability together with a huge potential of extending their functionality by additional modules allows developing advanced measuring and monitoring systems by non-specialists. However, using popular example codes often leads the user to pass over or not to be aware of the limitations of the system and drawing too farreaching conclusions on the basis of incorrectly performed measurements This paper deals with the problem of choosing the right method for performing measurements using an acquisition system based on the budget Arduino UNO solution. The main assumption was to use the standard, widely available Arduino libraries. The work focuses on the scenario when data should be subject to time and frequency analysis in the later processing. The operating limits of the device were also determined depending on the data transmission method used.
Pomiary wielkości fizycznych z wykorzystaniem układów opartych na mikrokontrolerach stają się standardem. Ich szeroka dostępność wraz z modułami rozszerzającymi ich funkcjonalność daje możliwość budowy zaawansowanych układów pomiarowych i monitorujących przez osoby nie będące specjalistami. Szereg dostępnych przykładów umożliwia szybką budowę systemu pomiarowego. Niejednokrotnie jednak powoduje, iż użytkownik jak i konstruktor nie zdają sobie sprawy z ograniczeń układu i na podstawie pomiarów wyciągają zbyt daleko idące wnioski. Niniejsza praca dotyka problematyki właściwej metody pozyskiwania danych pomiarowych. Na przykładach popularnie wykorzystywanych podejść do akwizycji danych, zobrazowano nie widoczne w pierwszym momencie skutki. W pracy skoncentrowano się na sytuacji, gdy w późniejszej obróbce dane mają podlegać analizom czasowym lub częstotliwościowym. Całość poparto przykładami bazując na układzie Arduino UNO. Założeniem autorów było wykorzystanie standardowo dostępnych bibliotek.
Źródło:
Diagnostyka; 2019, 20, 2; 33-48
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody i narzędzia projektowania aplikacji dla mikrokontrolerów jednoukładowych
Methods and tools to designing applications of one-chip micro-controllers
Autorzy:
Bodjański, M.
Powiązania:
https://bibliotekanauki.pl/articles/234695.pdf
Data publikacji:
2006
Wydawca:
Wojskowy Instytut Techniczny Uzbrojenia
Tematy:
projektowanie oprogramowania
mikrokontroler
programowanie komputera
software design
microcontroller
computer programming
Opis:
W artykule opisano proces projektowania oprogramowania dla systemów z mikrokontrolerami jednoukładowymi. Przedstawiono podstawowe metody i narzędzia tworzenia aplikacji. Porównano jakość kodów wynikowych i efektywność projektowania za pomocą prezentowanych metod.
A process of designing software for systems with one-chip micro-controllers is presented in the paper. The basic methods and tools are described with the quality characteristics of final codes and the designing effectiveness of proposed methods.
Źródło:
Problemy Techniki Uzbrojenia; 2006, R. 35, z. 100; 79-84
1230-3801
Pojawia się w:
Problemy Techniki Uzbrojenia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bezprzewodowy czujnik aktywności fizycznej bazujący na procesorze o niskim poborze mocy
Wireless sensor physical activity based on low-power processor
Autorzy:
Borowiec, R.
Surtel, W.
Powiązania:
https://bibliotekanauki.pl/articles/408533.pdf
Data publikacji:
2015
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
czujnik przyspieszenia
żyroskop
mikrokontroler
acceleration sensor
gyroscope
microcontroller
Opis:
W niniejszym artykule autorzy dokonują przeglądu stanu techniki współcześnie stosowanych urządzeń do pomiaru aktywności fizycznej człowieka. Ponadto przedstawiają autorski projekt zbudowanego bezprzewodowego czujnika aktywności fizycznej będącego odpowiedzią na dostrzeżone niedoskonałości dotychczas stosowanych rozwiązań. W artykule zawarto kryteria wyboru mikrokontrolera oraz akcelerometru, żyroskopu i magnetometru. W celu zaprezentowania działania urządzenia zamieszczono przebiegi czasowe zarejestrowane w stanie statycznym oraz podczas ruchu. Dodatkowo przedstawiono wybrane wartości statystyczne z zarejestrowanych przebiegów czasowych.
In this article the authors review the state of the art modern equipment used to measure the physical activity of man. In addition, they represent a unique project built wireless sensor human activity which is a response to the perceived shortcomings of the prior art. The article includes criteria for selecting the microcontroller and accelerometer, gyroscope and magnetometer. In order to present operation is given waveforms recorded while standing stationary and moving. In addition, presents selected statistical values of the recorded for the timing parameters.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2015, 4; 26-31
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Real-time diagnosis of three-phase induction machine using Arduino-Uno card based on Park’s circle method
Autorzy:
Boudiaf, M.
Cherroun, L.
Benbrika, M.
Powiązania:
https://bibliotekanauki.pl/articles/327572.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
circle of Park method
induction machine
Arduino-Uno microcontroller bard
real time acquisition
diagnoza
usterka
silnik indukcyjny
maszyna wirnikowa
Opis:
The main role of diagnosis is the real-time detection of the different types of faults on the physical system. Induction motors are nowadays used more frequently than any other electric motor in various kinds of electric drives. Incipient fault diagnosis is very important because if the fault is undetected, small motor failure can lead to serious motor failure. The objective of this work is the study and the realization of a diagnosis based on signal processing by the Park method of a wound rotor induction machine (in real-time). We have chosen for the realization of this diagnostic strategy the Arduino-UNO board and the ACS-720 current sensor as a signal acquisition system. The results obtained in practice show that this method of diagnosis is a very powerful and very sensitive technique for signaling and identifying the different types of faults and achieving the desired objectives.
Źródło:
Diagnostyka; 2018, 19, 3; 63-71
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Research and development of an electric traction drive based on a switched reluctance motor
Autorzy:
Buriakovsky, S.
Maslii, A.
Pasko, O.
Denys, I.
Powiązania:
https://bibliotekanauki.pl/articles/375320.pdf
Data publikacji:
2018
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
switched reluctance motor
torque
microcontroller
quadrature encoder
electronic switches
silnik reluktancyjny przełączalny
moment obrotowy
mikrokontroler
procesor sygnałowy
przełączniki elektroniczne
Opis:
In the most developed countries, intensive studies are being carried out to utilize various types of electric machines such as synchronous motors with permanent magnets and traction motors with non-traditional magnetic systems on traction electric drives. Switched Reluctance Motors (SRM) are one of the most simple, reliable, and cost-efficient technology used in manufacture and operation. Its convenient traction performance, combined with the high overload capacity, makes its use promising for both freight and passenger rolling stock. Our research is directed to develop a control system for a four-phase SRM. The procedure of fuzzy-regulator synthesis is presented. A physical model of a switched reluctance drive is created, namely, it is a system of a wheel set and a motor. The efficiency of the control system with different types of speed regulators was checked and their main quality indicators were determined. According to the results of the analysis, it was found that the fuzzy regulator more precisely controls the regulated value.
Źródło:
Transport Problems; 2018, 13, 2; 69-79
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena przydatności modułów nawigacji bezwładnościowej w bezdotykowych pomiarach położenia kątowego członów maszyn roboczych
Autorzy:
Chołodowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/1190007.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
system wsparcia operatora
pozycjonowanie
nawigacja bezwładnościowa
czujnik MEMS
mikrokontroler
operator assistance system
positioning
IMU
MEMS
sensors
microcontroller
Opis:
Advantages of automation in industrial vehicles and work machines are numerous. Even partial automation of work machine’s functions contribute to significant improvement in safety, efficiency and precision. For example, risk of accidental damage of power cables and water or gas pipes planted underground can be reduced by application of excavation control system with digging depth limiter. Industrial vehicles equipped with operator assistance systems, e.g. dozers and graders fitted with blade positioning systems, can be driven at higher speed then conventional ones, while performing the same duties. They are also able to accomplish particular task after smaller number of iterations. What is more, costs of surveyors’ and highly experienced operators’ salaries can be declined. Eventually, machines enriched by operator assistance systems, e.g. excavator having a grade control system onboard, can be involved in very unusual and precise works as slope grading, underwater digging and any works conducted after dusk. On the other hand, purchase and installation costs of operator assistance system are relatively high, especially when compared with prices of small industrial vehicles, e.g. so called mini excavators. Cost of said systems could be reduced in many different ways, for example, if cheaper electronic components, e.g. MEMS sensors, were used. Following article presents a contactless method and system for measurement of industrial vehicle’s bodies angular position. The method engages two Attitude and Heading Reference System (AHRS) modules which shall be attached to different work machine bodies. It was empirically verified using two self-made, inexpensive AHRS modules. Both of them consisted of STM32 F4 microcontroller and a triad of triaxial, MEMS sensors: a gyroscope, an accelerometer and a magnetometer. During tests first of modules was fixed to the frame and the second to the bucket of Avant 218 mini loader. Angular position of bucket with respect to vehicle frame was measured. Industrial grade, electronic GEMAC IS2A60P20-0 inclinometer and an optical instrument were used as reference tolls. Achieved results revealed overall error of examined system which is smaller than 1.05O . Further calculations, based on actual dimensions of IHI 35N3 and Komatsu PC750 LC-6 excavators’ arms, proved that the examined system is applicable for excavator arm bodies angular position identification. The distortion of bucket tip coordinates estimation using presented system was computed. In case of bigger Komatsu PC750 vertical and horizontal distortion equaled, respectively, 350 mm and 195 mm. In case of smaller IHI 35N3 both errors turned out to be at least 2.3 times smaller. Summing up, solution examined within the article fits small industrial vehicles particularly well. That is why an idea of a simple and readily available digging depth control system for mini excavators based on presented solution has been conceived. In order to embody said idea, presented system shall be enriched with two additional AHRS modules and operator-system interface, which would enable necessary adjustments. The system should be provided with dimensions of each body of excavator arm and maximum allowable digging depth. A LED or a sound signal could alert the operator in case of exceeding the established limit.
Źródło:
Interdisciplinary Journal of Engineering Sciences; 2016, 4, 1; 24--37
2300-5874
Pojawia się w:
Interdisciplinary Journal of Engineering Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka analogowych filtrów wielosekcyjnych oparta na magistrali testującej IEEE1149.1
A fault diagnosis of multi-section filters based on the IEEE1149.1 test bus
Autorzy:
Czaja, Z.
Bartosiński, B.
Powiązania:
https://bibliotekanauki.pl/articles/152339.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
magistrala IEEE1149.1
diagnostyka uszkodzeń
mikrokontroler
układ analogowy
IEEE1149.1 test bus
microcontroller
fault diagnosis
analog circuit
Opis:
Przedstawiono nową koncepcję testera JTAG BIST do samo-testowania torów analogowych opartych na wielosekcyjnych filtrach wyższego rzędu w mieszanych sygnałowo mikrosystemach elektronicznych sterowanych mikrokontrolerami i wyposażonych w magistralę testującą IEEE1149.1 (JTAG). Bazuje ona na metodzie diagnostycznej opartej na przekształceniu transformującym próbki odpowiedzi czasowych kolejnych sekcji filtra pobudzonego impulsem prostokątnym na krzywe identyfikacyjne w przestrzeni pomiarowej. Metoda ta pozwala na detekcję i lokalizację pojedynczych uszkodzeń parametrycznych w pierwszej w kolejności uszkodzonej sekcji filtra.
A new solution of the JTAG BIST for self-testing of analog parts based on multi-section higher-order filters in mixed-signal electronic microsystems controlled by microcontrollers and equipped with the IEEE1149.1 bus is presented. It is based on a fault diagnosis method based on transformation of voltage samples of the time responses of the next section of the filter on a square impulse into identification curves placed in a measurement space. The method can be used for fault detection and single soft fault localization of the first faulty section of the filter. Thanks to use of the proposed fault diagnosis method, there is no need for expanding the JTAG BIST by any additional components. It follows from the fact that the square pulse stimulating the tested circuit is set only at the input of the first section of the filter. The ADC SCANSTA476 samples two times the time responses at outputs of all sections. Thanks to this, the JTAG BIST needs only one pin of the BCT8244A, and up to 8 inputs pins connected to the analog multiplexer of the ADC of the SCANSTA476.
Źródło:
Pomiary Automatyka Kontrola; 2014, R. 60, nr 9, 9; 745-748
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mikroprocesorowy system do wyznaczania prądu psofometrycznego pojazdu trakcyjnego
The microcontroller system for the traction vehicle`s psophometric current determination
Autorzy:
Czuchra, W.
Żytka, M.
Ankudowicz, B.
Powiązania:
https://bibliotekanauki.pl/articles/153201.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
kompatybilność elektromagnetyczna
trakcja elektryczna
prąd psofometryczny
mikrokontroler
electromagnetic compatibility
electric traction
psophometric current
microcontroller
Opis:
Badania homologacyjne nowych i modernizowanych pojazdów trakcyjnych wymagają m.in. pomiaru prądu psofometrycznego według PN-EN 50121-3-1. W artykule przedstawiono układ do wyznaczania tej wielkości, zbudowany w oparciu o mikrokontroler. System charakteryzuje się szybkim uzyskaniem wyniku podawanego w sposób ciągły, np. podczas całego przejazdu badanego pojazdu trakcyjnego oraz dodatkowo łatwością obsługi i małymi gabarytami.
Many high power electronic devices working as main drive and auxiliary inverters are being installed in traction vehicles. It requires to pay particular attention to electromagnetic compatibility (EMC) of traction systems. Certification tests for new and modernized traction vehicles require among others the measurement of psophometric current according to PN-EN 50121-3-1. A system used for determination of this value, built on the basis of microcontroller is shown in the article. The task of this device is to measure (record) vehicle’s supply current, its FFT analysis and calculation of psophometric current in frequency range from 50Hz to 5kHz. Determined parameter has been defined and details related to normative measurement conditions have been specified. Individual blocks of presented system have been discussed, including with current measurement converter (Rogowski coil). Description and remarks related to configuration of used microcontroller were presented as well. Possibilities of using program libraries for FFT scope have been provided and results of initial test have been shown. Possibilities of system presented in the article facilitate significantly determining of measured value in heavy conditions of test site. System is characterized by fast result acquiring delivered continuously e.g. during the whole ride of tested vehicle and additional by service easiness and small gauge.
Źródło:
Pomiary Automatyka Kontrola; 2014, R. 60, nr 6, 6; 402-404
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development and optimization of an Automated Irrigation System
Autorzy:
Daniyan, Lanre
Nwachukwu, Ezechi
Daniyan, Ilesanmi
Bonaventure, Okere
Powiązania:
https://bibliotekanauki.pl/articles/384401.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
additive manufacturing
automation
irrigation
intelligent system
microcontroller
produkcja dodatkowa
automatyzacja
nawadnianie
mikrokontroler
Opis:
The deployment of appropriate technologies to enhance modern agricultural practices and improve crop yields is imperative for sustainability. This paper presents the development of a standalone automated irrigation system. The system design features good automation and control, which was achieved using an array of electronic timing system, soil feedback sensor and wireless communication system. Autonomous irrigation events are based on the states of the timing system, the soil feedback system and the wireless communication system. The control and automation of these systems was done using an AVR microcontroller, which was programmed to trigger intelligent and independent farm irrigation operation through a water pump attached to the system. The system also operates remotely via SMS command from mobile device and sends operational status feedback via SMS to preprogrammed mobile user(s). It also sends soil moisture condition to a remote user upon query. The system package was produced using additive manufacturing technique. The power supply system was implemented using solar power system in order to achieve a standalone, autonomous and reliable power supply necessary for an independent operation. The performance evaluation of the developed system show impressive response time, good reliability and excellent stability. Furthermore, the numerical experiment conducted using the Response Surface Methodology (RSM) produced a mathematical model for the optimization of the irrigation process for optimum performance and cost effectiveness.
Źródło:
Journal of Automation Mobile Robotics and Intelligent Systems; 2019, 13, 1; 37-45
1897-8649
2080-2145
Pojawia się w:
Journal of Automation Mobile Robotics and Intelligent Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of Single Sensor Based Maximum Power Point Tracking Techniques for Solar Water Pumping System
Autorzy:
Daoud, A.
Midoun, A.
Powiązania:
https://bibliotekanauki.pl/articles/262773.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Tematy:
MPP
buck converter
microcontroller
motor-pump
tachometer
pressure sensor
Opis:
This paper describes new techniques of maximum power point (MPP) tracking for solar water pumping system. The latter system consists of a PV array, a DC/DC buck converter and a universal motor coupled to a centrifugal pump. A conventional hill climbing method is employed to seek the MPP using the motor-pump rotation speed or the pump outlet pressure information. Experimental results are presented and a comparison with conventional algorithm which requires both voltage and current sensors is provided.
Źródło:
Electrical Power Quality and Utilisation. Journal; 2009, 15, 2; 23-27
1896-4672
Pojawia się w:
Electrical Power Quality and Utilisation. Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved and innovated universal DAQ microcontroller unit
Autorzy:
Dostálek, P.
Pekař, L.
Navrátil, P.
Powiązania:
https://bibliotekanauki.pl/articles/963928.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
data acquisition card
engineering education
microcontroller unit
temperature control
Opis:
This paper is aimed at the description of hardware design, software equipment and the functionality of the second evolution of the intelligent multipurpose input/output microcontroller converter and control unit designed and assembled by the authors. Preceding stages of the unit development are concisely overviewed first, the deficiencies of which give rise to the primary motivation of this contribution. Then separate hardware parts of the novel unit are described in detail including electronic schematic diagrams. The device firmware and software capabilities are introduced as well. The advantages of the unit are highlighted compared to older versions. Its functionality, performance and efficiency are then verified by a laboratory control-related dynamic responses measurement example. In the contrary to previous evolutions, a more compact hardware design, increased A/D and D/A converter resolutions, added USB communication capability, better and more accurate analog circuits with more advanced operation amplifiers, the use of OLED instead of LCD display, the pulse-width modulated signal generated by the microcontroller unit itself can be considered among the most important improvements. Moreover, the direct use of the serial link may reduce noise significantly and makes the device more universal.
Źródło:
International Journal of Electronics and Telecommunications; 2017, 63, 2; 171-180
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Koncepcja programowego systemu do tworzenia interaktywnych symulacyjnych aplikacji
Autorzy:
Dropia, R.
Czeberkus, P.
Timofiejew, A.
Powiązania:
https://bibliotekanauki.pl/articles/93052.pdf
Data publikacji:
2005
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
symulacja
interaktywny generator aplikacji
system Amethys
mikrokontroler
program simulation systems
Interactive application generator
microcontroller projects
Opis:
Conception of program system creating of autonomously working interactive simulation applications is proposed.
Źródło:
Studia Informatica : systems and information technology; 2005, 1(5); 49-57
1731-2264
Pojawia się w:
Studia Informatica : systems and information technology
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies