Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "methane desorption" wg kryterium: Temat


Wyświetlanie 1-13 z 13
Tytuł:
Investigations on methane emission from flooded workings of closed coal mines
Badania emisji metanu ze zlikwidowanych zatopionych kopalń węgla kamiennego
Autorzy:
Krause, E.
Pokryszka, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1342807.pdf
Data publikacji:
2013
Wydawca:
Główny Instytut Górnictwa
Tematy:
methane desorption
flooded mines
closed mines
desorpcja metanu
zatapianie kopalń
likwidacja kopalń
Opis:
The migration of methane towards the surface, within mining areas of closed mines, can be a danger to public safety for many of years after the process of liquidation has been finished. The liberation of methane from undisturbed coal seams, and those destressed through earlier mining has not been fully recognised so far. Knowledge of the effect of the presence of water, along with hydrostatic pressure, on the intensity of methane desorption from destressed seams is necessary in determining the approximate volume of methane inflowing, within a period of time, into a closed mine. Laboratory tests on these relationships have been carried out in accordance with proper research methodology by the National Institute for the Environment and Industrial Hazards (INERIS), France with the Central Mining Institute, Katowice, Poland. The results have facilitated determining the effect of hydrostatic pressure variation of water on the intensity of methane desorption from flooded coal. These results has been practically applied in predicting the emission of methane into closed mines, and in orienting the rules of methane hazard control, both during the process of mine closure, and on the surface of post-mining areas.
Migracja metanu w kierunku powierzchni, w granicach obszarów górniczych zlikwidowanych kopalń, może stanowić zagrożenie dla bezpieczeństwa publicznego przez wiele lat od czasu zakończenia likwidacji. Wydzielanie się metanu z nienaruszonych pokładów węgla i pokładów odprężonych prowadzoną wcześniej eksploatacją, nie jest dotychczas w pełni rozpoznane. Znajomość wpływu obecności wody oraz związanego z nią ciśnienia hydrostatycznego na intensywność desorpcji metanu z pokładów odprężonych, jest niezbędna do określenia szacunkowej ilości metanu dopływającego w przedziale czasu do zlikwidowanej kopalni. Badania laboratoryjne tych zależności przeprowadzone zostały w oparciu o metodykę badawczą opracowaną przez Państwowy Instytut Środowiska i Zagrożeń Przemysłowych (INERIS) we Francji, wspólnie z Głównym Instytutem Górnictwa w Katowicach. Wyniki badań pozwoliły na określenie wpływu zmian ciśnienia hydrostatycznego słupa wody na intensywność desorpcji metanu z węgla, co znalazło praktyczne zastosowanie w prognozowaniu wydzielania się metanu do zlikwidowanych kopalń i pozwoliło na odpowiednie ukierunkowanie profilaktyki zagrożenia metanowego podczas likwidacji kopalni oraz na powierzchni terenów pogórniczych.
Źródło:
Journal of Sustainable Mining; 2013, 12, 2; 40-45
2300-1364
2300-3960
Pojawia się w:
Journal of Sustainable Mining
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New instruments and methods for analysing the coal-methane system
Autorzy:
Skoczylas, N.
Kudasik, M.
Wierzbicki, M.
Murzyn, T.
Powiązania:
https://bibliotekanauki.pl/articles/178335.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
desorption
methane
carbon dioxide
coal
outburst
diffusion
Opis:
The authors of the present paper designed and constructed a prototype of an instrument which enables fully automated determination of the desorbable methane content and effective diffusion coefficient in underground conditions. Due to microprocessor analysis of the recorded data and the application of the mathematical model of the diffusion process, it is possible to automatically determine the amount of methane whose release from a coal sample occurred before the sample was placed within a measuring instrument. It is also possible to carry out follow-up extrapolation of the recorded data so the time duration needed to determine reliable results can be reduced. The instrument was tested and optimized, and a number of copies sufficient for performing underground tests were constructed. The concept of the instrument represents a totally new approach to the observation of gas release from a coal sample. Instead of short-period measurements, virtually the whole process of methane release from coal is registered and analysed. This is possibly due to the use of a grain fraction lower than one mm which is presently applied for the sake of evaluating the methane- bearing capacity and desorption intensity.
Źródło:
Studia Geotechnica et Mechanica; 2015, 37, 1; 85-91
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczanie metanonośności pokładów na podstawie pomiarów wskaźnika intensywności desorpcji na przykładzie wyników z wybranej kopalni węgla kamiennego
Indication of methane volume of beds on the basis of measurements of desorption intensity index illustrated with an example of results from the selected hard coal mine
Autorzy:
Dutka, B.
Skoczylas, N.
Wierzbicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/167646.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
metan
metanonośność
zagrożenia naturalne
desorpcja
methane
methane volume
natural hazards
desorption
Opis:
Oznaczenie metanonośności pokładów węgla kamiennego odbywa się na podstawie badań prowadzonych na próbkach kawałkowych oraz (najczęściej) zwiercinowych. W tym drugim przypadku istnieje Polska Norma określająca sposób oznaczania metanonośności w pokładach węgla kamiennego. Norma obejmuje również wyznaczanie metanonośności przybliżonej na podstawie pomiaru wartości wskaźnika intensywności desorpcji dwuminutowej. W pracy przeanalizowano zależności pomiędzy wartościami wskaźników intensywności desorpcji oraz metanonośnościami dla różnych pokładów kopalni „Zofiówka". Podano wartości współczynników a i b, równań regresji prostych w układzie Mn=&(Δp)+b. Pokazano, jakie różnice występują pomiędzy poszczególnymi pokładami. Różnice te wynikają najprawdopodobniej z różnic w wartościach współczynników dyfuzji dla poszczególnych pokładów. Przedstawione relacje pomiędzy metanonośnością a wskaźnikiem desorpcji służyć mogą do szacowania zawartości metanu w poszczególnych pokładach z mniejszą niepewnością pomiarową w porównaniu z normą.
Determination of methane volume of hard coal seams takes place on the basis of a research conducted on lump samples and (most often) drilling samples. The latter is determined by a Polish Standard which describes the method of designation of methane volume of hard coal beds. The Standard includes also the determination of methane volume approximated on the basis of measurements of the two-minute desorption intensity index value. This paper presents an analysis of relations between the values of desorption intensity indexes and methane volumes for different coal beds in "Zofiówka" coal mine. The values of a and b coefficients of simple regression equations in the system Mn = a(Determination of methane volume of hard coal seams takes place on the basis of a research conducted on lump samples and (most often) drilling samples. The latter is determined by a Polish Standard which describes the method of designation of methane volume of hard coal beds. The Standard includes also the determination of methane volume approximated on the basis of measurements of the two-minute desorption intensity index value. This paper presents an analysis of relations between the values of desorption intensity indexes and methane volumes for different coal beds in "Zofiówka" coal mine. The values of a and b coefficients of simple regression equations in the system Mn = a(Δp) + b were presented. This work presents the differences between particular coal beds. These differences most likely result from the differences in values of diffusion coefficients for particular coal beds. The presented relations between the methane volume and the desorption index may be used for the estimation of methane concentration in particular coal beds with less measurement uncertainty than it would be in the Standard.
Źródło:
Przegląd Górniczy; 2015, 71, 2; 29-34
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of the impact of exploitation structures on pressure distribution and adsorbed methane content in coal seams using dynamic flow models. A case study
Autorzy:
Szott, Wiesław
Miłek, Krzysztof
Łętkowski, Piotr
Gołąbek, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/1402316.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Wydział Geoinżynierii, Górnictwa i Geologii. Instytut Górnictwa
Tematy:
methane drainage
coal seam
exploitation structures
desorption
reservoir simulation
Opis:
One of the most serious difficulties encountered during the estimation of results of various methods of methane drainage from coal seams is the determination of the initial condition of the analysed coal seam prior to commencement of the actual process of methane drainage. It is well known that the exploitation operation in adjacent coal seams, as well as preparatory works in the analysed seam may significantly modify the original state of methane adsorption in that seam, as well as influence the distribution of pore pressure and saturation of its natural fractures with fluids (gas, water). This state is of dynamic nature and depends on a long and complex history of the mining activity in the analysed facility and its surrounding. Detailed specification of the above condition is usually replaced by qualitative and very approximate models, which does not allow for consideration of the process preceding the methane drainage. The subject of the paper is the quantitative evaluation of the initial conditions for a coal seam with the use of dedicated simulation models of the analysed seam along with its broad surroundings. Results of this modelling including modifications of appropriate transport parameters of layers between the seams and their influence on detailed distribution of pore pressures, levels of methane desorption from the coal matrix, directions of reservoir fluids flow (methane, water) and saturation with these fluids in natural fractures of the selected seam, as well as in the pores of overburden and underburden rocks will be thoroughly analysed for determination of spacious and temporal effects of the mining activities in terms of their influence on the selected seam.
Źródło:
Mining Science; 2020, 27; 133-153
2300-9586
2353-5423
Pojawia się w:
Mining Science
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analogowy Rejestrator Emisji Metanu AREM - testy kopalniane
Analogue Methane Emission Recorder AMER - mining tests
Autorzy:
Skoczylas, N.
Kudasik, M.
Wierzbicki, M.
Murzyn, T.
Powiązania:
https://bibliotekanauki.pl/articles/167452.pdf
Data publikacji:
2016
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
metanonośność
współczynnik dyfuzji
wkład węgiel-gaz
desorpcja
metan
methane content
diffusion coefficient
coal-gas system
desorption
methane
Opis:
Opracowany został Analogowy Rejestrator Emisji Metanu AREM. Przyrząd pozwala na wyznaczanie desorbowalnej zawartości metanu w węglu oraz współczynnika dyfuzji. Urządzenie zostało zoptymalizowane pod kątem pracy w warunkach kopalnianych. Wprowadzone zostały poprawki względem prototypu poprawiające niezawodność i łatwość użytkowania. Urządzenie wyposażone zostało w zestaw sit. Opracowana została metodyka pomiarowa. Przeprowadzono testy kopalniane. Wyniki pochodzące z prezentowanego urządzenia wskazują dużą zbieżność z pomiarami przeprowadzanymi metodami stosowanymi obecnie w górnictwie.
Analogue Methane Emission Recorder (AMER) has been developed. The device allows to determine the desorbable methane content of coal and the diffusion coefficient. AREM has been optimized to work in coal mines. Adjustments have been made to improve the reliability and usability of this prototype. The device is equipped with a set of sieves. Measurement methodology has been developed. Mining tests were carried out. The results obtained from the presented device show high similarity to the measurements made by methods currently used in the mining industry.
Źródło:
Przegląd Górniczy; 2016, 72, 4; 56-62
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wyznaczenie desorbowalnej zawartości metanu w węglu oraz efektywnego współczynnika dyfuzji metanu na węglu metodą analogową
Determination of desorbable methane content in coal and effective coefficient of methane diffusion on coal by use of the analog method
Autorzy:
Skoczylas, N.
Kudasik, M.
Wierzbicki, M.
Murzyn, T.
Powiązania:
https://bibliotekanauki.pl/articles/167335.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
metanonośność
współczynnik dyfuzji
wkład węgiel-gaz
desorpcja
metan
volume of methane
diffusion coefficient
coal-gas insert
desorption
methane
Opis:
Opracowana została koncepcja nowej metody oraz urządzenia pomiarowego generującego dodatkowe parametry opisu układu węgiel-gaz. Dzięki prezentowanej metodzie możliwe jest określenie wartości desorbowalnej zawartości metanu w węglu oraz efektywnego współczynnika dyfuzji. Konstrukcja urządzenia pomiarowego pozwala na pracę w warunkach kopalnianych. Diametralne zmniejszenie klasy ziarnowej próbki węgla skutkuje skróceniem czasu obserwacji procesu emisji gazu do jednej doby. Praca zawiera opis konstrukcji przyrządu, prezentację prototypu oraz przykładowe wyniki testów laboratoryjnych.
This paper presents a concept of a new method and measurement device which generates additional parameters of coal-gas system description. Thanks to the presented method, it is possible to determine the desorbable value of methane content in coal and effective coefficient of diffusion. The construction of the measurement device allows to operate under mining conditions. Significant reduction of the size grade of a coal sample results in cutting the time of observation of the gas emission process down to twenty-four hours. This paper includes a description of the device, presentation of the prototype and examples of laboratory tests results.
Źródło:
Przegląd Górniczy; 2015, 71, 2; 66-71
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie adsorpcji azotu, argonu i metanu na wybranym materiale skalnym
Comparison of nitrogen, argon and methane adsorption on a selected shale rock sample
Autorzy:
Dudek, L.
Powiązania:
https://bibliotekanauki.pl/articles/1835449.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
adsorpcja
desorpcja
azot
argon
metan
skała łupkowa
adsorption
desorption
nitrogen
methane
shale rock
Opis:
W artykule przedstawiono teoretyczne podstawy adsorpcji, porównano izotermy adsorpcji azotu, argonu i metanu otrzymane dla materiału łupkowego złoża niekonwencjonalnego. Badania zostały wykonane za pomocą urządzenia TriStar II 3020 firmy Micromeritics w INiG – PIB (azot i argon) oraz 3Flex tej samej firmy w USA (metan). Przedstawiono wartości powierzchni właściwej obliczonej metodą BET dla azotu, argonu i metanu.
Presented are the theoretical basis of adsorption, compared are adsorption isotherms of nitrogen, argon and methane obtained for a shale sample derived from a non-conventional deposit. The tests were carried out using the Micromeritics Tristar II 3020 in the Oil and Gas Institute – National Research Institute (nitrogen and argon) and the Micromeritics 3Flex apparatus in USA (methane). Values of BET surface area obtained from sorption of nitrogen, argon and methane are given.
Źródło:
Nafta-Gaz; 2017, 73, 6; 375-377
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of rock geomechanical parameters on increased longwall absolute methane emission rate forecasting accuracy
Autorzy:
Walentek, Andrzej
Wierzbiński, Krystian
Powiązania:
https://bibliotekanauki.pl/articles/1853828.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
zagrożenie metanowe
modelowanie numeryczne
emisja metanu
methane hazard
methane emission rate forecasting
FDM simulations
numerical modeling
destressing (desorption) zone
Opis:
In longwall absolute methane emission rate forecasting, the range of the destressing zone is determined empirically and is not considered to be dependent on the geomechanical parameters of the rock strata. This simplification regarding destressing zone determination may result in significant differences between the forecast and the actual methane emission rates. During the extraction of coal seams using a system involving longwalls with caving under the conditions of low rock mass geomechanical parameters, the absolute metha-ne emission rate forecasts are typically underestimated in comparison to the actual methane emission rates.In order to examine the influence of the destressing zones on the final forecasting result and to assess the influence of the rock mass geomechanical parameters on the increased accuracy of forecast values, destressing zones were determined for three longwalls with lengths ranging from 186 to 250 m, based on numerical modelling using the finite difference method (FDM). The modelling results confirmed the assumptions concerning the upper destressing zone range adopted for absolute methane emission rate forecasting. As for the remaining parameters, the destressing zones yielded great differences, particularly for floor strata. To inspect the accuracy of the FDM calculation result, an absolute methane emission rate forecasting algorithm was supplemented with the obtained zones. The prepared forecasts, both for longwall methane emission rates as well as the inflow of methane to the longwalls from strata within the destressing zone, were verified via underground methane emission tests. A comparative analysis found that including geomechanical parameters in methane emission rate forecasting can significantly reduce the errors in forecast values.
Źródło:
Archives of Mining Sciences; 2020, 65, 3; 641-664
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative experiment study on nitrogen injection and free desorption of methane-rich bituminous coal under triaxial loading
Eksperymenty i badania porównawcze efektów wstrzykiwania azotu i swobodnej desorpcji na węglu bitumicznym o wysokiej zawartości metanu w warunkach obciążeń trójosiowych
Autorzy:
Zhang, L.
Ye, Z.
Tang, J.
Hao, D.
Zhang, C.
Powiązania:
https://bibliotekanauki.pl/articles/219975.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wstrzykiwanie gazu
metan
tempo wypierania
swobodna desorpcja
gas injection
methane
displacement ratio
free desorption
Opis:
As a kind of associated geological gas, coalbed methane (CBM) is mainly adsorbed in the coal seam. The coal-methane adsorption phenomenon can be described by Langmuir monolayer adsorptio n model, BET multilayer adsorption model and the Theory of Volume Filling of Micropore (TVFM), whereas the binary gas adsorption phenomenon can be described by the extended Langmuir Model. For the CBM in the low permeability coal seam, the amount of gas released by direct drainage is relatively limited, which cannot eliminate the gas explosion and outburst hazards. Gas injection is an effective method to promote methane drainage. In this paper, the free desorption and nitrogen injection displacement experiments are comparatively analyzed, which allows verifying the effectiveness of nitrogen injection’s enhancement to gas drainage. The experiment of injecting nitrogen gas into the coal body shows that the coal fracture can be maintained or expanded by the injected gas pressure so that more methane can be released. The nitrogen injection has a higher time efficiency than that of free desorption as well. The displacement ratio of N2/CH4 is in the range of 1-3. Both the injection pressure and confining pressure affect the displacement ratio. The analysis of the desorbed gas components shows that the relationship between the methane component and gas flooding time is an “inverted S” shape curve, and the appropriate time for the methane collection can be inferred by the time interval of the rapid decline of the curve.
Metan zawarty w złożu węgla występuje w głównej mierze w postaci zaadsorbowanej, jako gaz związany. Zjawisko adsorpcji metanu na węglu opisuje model adsorpcji jednowarstwowej Langmuira, model adsorpcji wielowarstwowej BET oraz teoria objętościowego wypełniania mikroporów. Z kolei procesy desorpcji mieszanin dwóch gazów opisuje rozszerzony model Langmuira. W przypadku metanu zawartego w złożu węgla o niskiej przepuszczalności, ilość gazu uwalnianego poprzez proste odgazowanie jest ograniczona i wciąż nie eliminuje ryzyka wybuchu gazu oraz wyrzutu skał i gazu. Wstrzykiwanie gazów jest jedną ze skutecznych metod odgazowania. W pracy tej przeprowadzono badanie porównawcze rezultatów swobodnej desorpcji gazu oraz wstrzyknięcia do złoża azotu, w celu zademonstrowania skuteczności odgazowania poprzez wprowadzenie azotu. Eksperyment polegający na wstrzykiwaniu azotu do calizny węglowej pokazuje możliwość zachowania lub powiększenia pęknięć w strukturze węgla pod działaniem ciśnienia wstrzykiwanego gazu, co umożliwi uwolnienie większych ilości metanu. Ponadto, wprowadzenie azotu okazuje się rozwiązaniem skuteczniejszym w dłuższym okresie czasu niż swobodna desorpcja. Stosunek wypierającego metan N2 do CH4 wynosi w przybliżeniu 1:3. Zarówno ciśnienie wstrzykiwanego gazu jak i wielkość ciśnienia złożowego mają wpływ na tempo wypierania metanu przez azot. Analiza składników desorbowanego gazu wskazuje, że zależność ilości metanu od czasu wypływu gazu opisywana jest na wykresie krzywą w postaci odwróconej litery S, zaś odpowiedni czas na odzysk metanu odczytujemy jako przedział odpowiadający nagłemu obniżeniu widocznemu na wykresie.
Źródło:
Archives of Mining Sciences; 2017, 62, 4; 911-928
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie wyników modelowania numerycznego stref odprężenia eksploatacyjnego w prognozowaniu emisji metanu z warstw otaczających do ścian zawałowych
Application of the results of numerical modelling of destressing zones in prediction methane emissions from surrounding layers (seams) to longwalls
Autorzy:
Wierzbiński, Krystian
Powiązania:
https://bibliotekanauki.pl/articles/1861208.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
zagrożenie metanowe
prognoza metanowości
symulacje MRS
strefa odprężenia eksploatacyjnego (desorpcji)
methane hazard
methane emission rate prediction
FDM simulations
destressing (desorption) zone
Opis:
Wielopoziomowy charakter eksploatacji pokładów węgla charakterystyczny dla Górnośląskiego Zagłębia Węglowego oraz zaleganie w strefie odprężenia eksploatacyjnego wielu pokładów metanowych skutkuje intensyfikacją zagrożenia metanowego w ścianach z tytułu dopływu metanu desorbującego z pokładów objętych strefą odprężenia eksploatacyjnego. Dla zminimalizowania błędu prognozy metanowości bezwzględnej kluczowego znaczenia nabiera trafne określenie zasięgu strefy odprężenia eksploatacyjnego, uzależnionego od lokalnych warunków górniczo-geologicznych, a w szczególności od parametrów geomechanicznych warstw skalnych. Mając na uwadze fakt, że w aktualnie stosowanej metodzie prognozowania metanowości bezwzględnej ścian zasięg strefy odprężenia eksploatacyjnego nie uwzględnia właściwości warstw skalnych, w artykule w oparciu o Metodę Różnic Skończonych (MRS) - wyznaczone zostały strefy odprężenia eksploatacyjnego dla dwóch ścian o długości 186 m i 250 m. W przypadku zasięgu górnej strefy odprężenia eksploatacyjnego wyniki modelowania potwierdziły założenia przyjmowane do prognozy metanowości bezwzględnej ścian. Dla strefy odprężenia eksploatacyjnego obejmującej warstwy spągowe uzyskano jednak znaczne różnice między zasięgiem określanym metodą empiryczną a metodą modelowania MRS. Po zaimplementowaniu stref MRS do algorytmu prognozowania metanowości bezwzględnej, opracowano prognozy dopływu metanu do ścian z warstw znajdujących się w strefie odprężenia eksploatacyjnego. Przeprowadzenie badań dołowych emisji metanu pozwoliło zweryfikować trafność prognozy uwzględniającej parametry geomechaniczne górotworu.
The multi-level character of coal seams exploitation characteristic for the Upper Silesian Coal Basin and the fact that many methane seams are deposited in the destressing zone results in the intensification of methane hazard in longwalls due to the inflow of desorbing methane from the seams covered by the destressing zone. For minimising the error of forecasting the methane emission, it is crucial to correctly determine the range of the destressing zone, which depends on the local mining and geological conditions, and in particularly on the geomechanical parameters of rock layers. Considering the fact that the currently used methane emission forecasting method does not take into account the properties of rock layers, the destressing zones for two longwalls with a length of 186m and 250m were determined on the basis of the Finite Difference Method (FDM). For the upper destressing zone, the modelling results confirmed the assumptions applied to the prognosis of methane emissions to the longwalls. In case of the bottom layers, significant differences were obtained between the range of destressing zone determined by the empirical method and the FDM. After the implementation of FDM zones into the methane emission prediction algorithm, prognoses of methane inflow to longwalls from layers located in the destressing zone were performed. Underground tests of methane emission allowed to verify the accuracy of the prognosis based on geomechanical parameters of the rock mass.
Źródło:
Przegląd Górniczy; 2020, 76, 8; 1-12
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Graniczny wskaźnik intensywności desorpcji gazu z węgla charakteryzujący stan zagrożenia metanowego oraz wyrzutami metanu i skał
Boundary index of intensity gas desorption from coal characterizing state threat metanew and reproaches of methane and rocks
Autorzy:
Stączek, A.
Simka, A.
Powiązania:
https://bibliotekanauki.pl/articles/340236.pdf
Data publikacji:
2004
Wydawca:
Główny Instytut Górnictwa
Tematy:
desorbometr manometryczny cieczowy
DMC-2
desorpcja gazu z węgla
zagrożenie metanowe
manometric liquid descorbometer
gas desorption from coal
methane hazards
Opis:
W artykule omówiono powszechnie stosowany desorbometr manometryczny cieczowy typu DMC-2 i elektroniczny przyrząd typu "Barbara" do określania szacunkowej zawartości metanu pochodzenia naturalnego w węglu (metanonośności) i wartości wskaźnika intensywności desorpcji gazu z węgla do rozpoznawania i prognozowania (prognoza bieżąca) stanu zagrożenia gazowego i wyrzutami gazów i skał oraz nową metodę określania granicznego wskaźnika intensywności desorpcji gazu z węgla. Stwierdzono, że stan zagrożenia wyrzutami gazów i skał w czole przodka drążonego wyrobiska górniczego oraz możliwość zaistnienia zagrożenia wyrzutowego w przodku można ocenić na podstawie granicznego wskaźnika intensywności desorpcji gazu z węgla, P2 36,9 hPa (Dokumentacja pracy statutowej GIG). Wskaźnik ten bezpośrednio w miejscu badania w drążonym wyrobisku górniczym wyznacza się przyrządem typu "Barbara" w czasie cyklu pomiarowego wynoszącego 240 s, z próbki węglowej umieszczonej w pojemniku przyrządu przy ciśnieniu absolutnym (otoczenia).
In the article discussed often use a manometric liquid descorbmeter type DMC-2 and electronic tool type "Barbara" for definition of largeness of intensity index of gas desorption from coal and estimate contents of methane of natural origin in coal (methanity) for identifying and forecasting activity (current forecast) state threat metanew and reproaches of methane and rocks and new method of definition of boundary intensity index of gas desorption from coal. It said, that state of threat reproaches of methane and rocks in the front of ancestor bored mining and capability to coming into being of this threat, it is possible to evaluate on base of boundary intensity index of gas desorption from coal, P2 36,9 hPa. This index directly in place of research in bored mining by an instrument type "Barbara" is appointed in time of measuring cycle totalling 240 s from coal sample placed in container of instrument at absolute pressure (enclose).
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2004, 3; 123-142
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prognozowanie i kontrolowanie dynamicznych zjawisk metanowych w kopalniach węgla kamiennego na podstawie pomiaru temperatury względnej calizny węglowej
Forecasting and monitoring of dynamie methane phenomena in coal mines based on the relative temperature of unmined coal
Autorzy:
Kajewski, B.
Kobiela, Z.
Powiązania:
https://bibliotekanauki.pl/articles/340587.pdf
Data publikacji:
2011
Wydawca:
Główny Instytut Górnictwa
Tematy:
calizna węglowa
kopalnia węgla kamiennego
temperatura względna
metoda pomiarowa
aparatura pomiarowa
metan
zagrożenie metanowe
zjawiska gazodynamiczne
desorpcja gazu
unmined coal
coal mine
relative temperature
measuring apparatus
measurement method
methane
methane hazard
gasodynamics phenomenas
gas desorption
Opis:
W artykule przedstawiono rezultaty wieloletnich badań autorów nad zmianą temperatury względnej węgla w pokładach pod wpływem desorpcji metanu, prowadzonych w Głównym Instytucie Górnictwa. Pozwoliły one na opracowanie kryteriów, metody i aparatury pomiaru temperatury względnej węgla w strefie okołoprzodkowej pod wpływem desorpcji metanu i zachodzących procesów endotermicznych. Przedstawiono propozycję zastosowania pomiaru temperatury względnej węgla w pokładach nasyconych metanem dla bieżącej oceny stanu zagrożenia metanem oraz zjawiskami gazogeodynamicznymi w strefie okołoprzodkowej. Przedstawiona metoda pomiarowa i aparatura pozwalają szybciej i dokładniej ocenić rzeczywiste zagrożenie metanowe i zagrożenie zjawiskami gazogeodynamicznymi w drążonych wyrobiskach, w pokładach nasyconych metanem.
The paper discusses the method and apparatus for non-contact measurement of temperaturę of the coal mass within prospecting boreholes, with the aim of making a current prognosis of the hazard due to the outburst of methane and rock in driven mine headings, and of determining the buffer zone to protect the heading against unexpected outbursts. The probe to control borehole temperature operates on the basis of non-contact measurement of temperaturę. It is designed to perform continuous measurements of the relative temperature along the walls of the prospecting borehole with the diameter of 50-90 mm, and to determine the outburst hazard zones in the coal headings of the mine workings. The measurement of temperature along the borehole, realised by means of the probe, is aimed at locating the hazard zone (HZ) in respect of the outburst, and at simultancous determining the buffer safety zone (BSZ). The determination of HZ and BSZ zones is of vital importance for safety of mining crews employed at driving the workings in coal seams endangered with outbursts of methane and rock. The HZ zone provides information on the location of oceurrence of the hazard zone in respect of the outburst ahead of the front of the driven working. In turn, the BSZ zone defines the thickness of the stress-relieved and degassed protective coal mass, protecting the heading against a direct contact with the BSZ zone.
Źródło:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa; 2011, 3; 37-48
1643-7608
Pojawia się w:
Prace Naukowe GIG. Górnictwo i Środowisko / Główny Instytut Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metan z pokładów węgla (CBM) – doświadczenia światowe i perspektywy rozwoju w Polsce
Coalbed methane (CBM) – global experience and the prospects of development in Poland
Autorzy:
Słoczyński, T.
Drozd, A.
Powiązania:
https://bibliotekanauki.pl/articles/1835317.pdf
Data publikacji:
2017
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
metan z pokładów węgla
zasoby CBM
produkcja CBM
emisja gazów cieplarnianych
gaz adsorbowany
sekwestracja
desorpcja
coalbed methane (CBM)
CBM geological resources
greenhouse gas emissions
gas adsorbed
sequestration
desorption
Opis:
W artykule przedstawiono rozmieszczenie i wartości udokumentowanych zasobów geologicznych metanu w pokładach węgla (CBM) na świecie oraz dane dotyczące ich wydobycia. Scharakteryzowano warunki występowania akumulacji metanu w pokładach węgla kamiennego. Omówiono korzyści płynące z wykorzystania metanu w procesach technologiczno-produkcyjnych oraz zagrożenia związane z jego wydobyciem.
The paper presents the distribution and value of documented coalbed methane (CBM) geological resources in the world and presents the history of the production of coaldbed gas. Conditions of the CBM accumulations occurrence were characterized. The benefits of using methane in the process of technological production – and the risks associated with its extraction were discussed.
Źródło:
Nafta-Gaz; 2017, 73, 11; 851-856
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-13 z 13

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies