Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "metallic alloy" wg kryterium: Temat


Tytuł:
The structure of clusters in liquid alloys of pseudo-binary PbTe-Bi2Te3 system
Autorzy:
Korolyshyn, A. V.
Olyinyk, Z. M.
Mudry, S. I.
Powiązania:
https://bibliotekanauki.pl/articles/378946.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
metallic alloy
short-range order
melt
thermoelectric material
stop metaliczny
uporządkowanie bliskie
wytop
materiał termoelektryczny
Opis:
Purpose: of this paper is to study the structure of melts of quasi-binary system Bi2Te3-PbTe by means of X-ray diffraction method. The aim of the research was to investigate the short range order in melts comparing it with the structure in solid state. Design/methodology/approach: Analysis of the structural factors, radial distribution functions of atoms and basic structural parameters showed that the structure of melts at temperatures near the liquidus shows microheterogeneity. Findings: On the basis of the analysis of structural factors, functions of the radial distribution of atoms and basic structural parameters, it is shown that in the given concentration the short range order structure of liquid alloys of pseudo-binary PbTe-Bi2Te3 system is microinhomogeneous and is characterized by the presence of associates, whose atomic arrangement is like to the structure of solid compounds, existing in this concentration range. Research limitations/implications: To complete the understanding of short-range order effect on the formation of the physical properties of Pb-Bi-Te alloys, further studies of the thermoelectric properties of these alloys in the liquid state are needed. Practical implications: The promise of the considered direction requires an experimental and theoretical study of the processes of bulk, thin film and nanostructured material. In this case, it is necessary to develop a technology for the synthesis of compounds of Pb-Bi-Te system, obtaining thin films and nanostructures using the vapour phase methods with studying the mechanisms of thermoelectric properties of the material formation and optimization of technological regimes for obtaining effective thermoelectric materials based on compounds of Pb-Te-Bi system. Originality/value: The processes of structure formation of nanosystems with given characteristics are investigated, because among numerous thermoelectric materials, bismuth telluride (Bi2Te3) and its alloys are the most important thermoelectric materials used in state-of-the-art devices near room temperature, and lead telluride (PbTe)-based alloys are extensively used in power supplies for space exploration and generators for use at medium to high temperatures.
Źródło:
Archives of Materials Science and Engineering; 2019, 100, 1/2; 5-12
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of ultrasonic and other atomization methods in metal powder production
Autorzy:
Bałasz, B.
Bielecki, M.
Gulbiński, W.
Słoboda, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/24200641.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
powder metallurgy
metallic alloy
atomization
additive manufacturing
titanium
metalurgia proszków
stop metalowy
atomizacja
wytwarzanie przyrostowe
tytan
Opis:
Purpose The results showed that the UA powder has a finer average particle size with a narrower statistical distribution of particles than those made by the GA method. Because the UA powder has a higher sphericity and lower porosity, Generally, UA offers better-quality powders in terms of properties such as higher tap density, better flowability and low oxygen content. Design/methodology/approach Ultrasonic atomization (UA) with melting raw material by an electric arc. Characterisation of the powders: particle size distribution (PSD), density, and flowability were carried out. Other parameters, such as microstructure, deviation in the chemical composition and powder surface morphology, were also investigated. Findings The results showed that the UA powder has a finer average particle size with a narrower statistical distribution of particles than those made by the GA method. Because the UA powder has a higher sphericity and lower porosity, Generally, UA offers better-quality powders in terms of properties such as higher tap density, better flowability and low oxygen content. Research limitations/implications As an example of semi-industrial scale application of the UA system, the Ti6Al4V and TiAl powders were produced after remelting the wire. The UA system is commercially available for processing any metallic material. Practical implications The test campaign results showed that the Ti6Al4V powder produced by the ultrasonic atomisation has a similar or better quality as those available from large-scale gas atomisation plants. Originality/value The new method of UA powder production was analysed in terms of key powder parameters. The properties of the titanium-based powder produced this way were analysed with a view to future applications.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2023, 116, 1; 11--24
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mechanical Properties and Corrosion Behaviors of Aged Ti-4Mo-4Cr-X (X = Sn, V, Zr) Alloys for Metallic Biomaterials
Autorzy:
Lee, Kwangmin
Lee, Gunhee
Powiązania:
https://bibliotekanauki.pl/articles/355252.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
beta Ti-alloy
metallic biomaterials
aging
potentiodynamic polarization
Opis:
The purpose of this study was to investigate the mechanical properties of beta type aged Ti-4Mo-4Cr-X (X = V, Sn, Zr) quaternary alloy for use as a cardiovascular stent. Titanium (Ti) alloys were fabricated using a vacuum arc remelting furnace process. To homogenize the specimens of each composition and remove the micro segregation, all cast specimens were subjected to homogenization at 850°C for 4 h, which was 100°C higher than the β-transus temperature of 750°C. The tensile strength and elongation of the aged Ti-4Mo-4Cr-X (X = V, Sn, Zr) alloys were increased as compared to the homogenized alloys. In addition, many α/β interface boundaries formed after aging treatment at 450°C, which acted as inhibitors of strain and caused an increase in tensile strength. The elongation of Ti-4Mo-4Cr-X alloys consisting of α + β phases after aging treatment was improved by greater than 30%. Results of a potentiodynamic polarization test showed that the lowest current density of Ti-4Mo-4Cr-4Sn with1.05 × 10-8 A/cm2 was obtained. The present Ti-4Mo-4Cr-X alloys showed better corrosion characteristics as compared to the 316L stainless steel and L605 (Co-Cr alloy) cardiovascular stent alloys.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 4; 1297-1301
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Infulence of recrystallization on damping properties of alloy Fe75Zr4Ti3B17Cu1
Autorzy:
Bocian, M.
Mech, R.
Myszka, W.
Przybylski, M.
Powiązania:
https://bibliotekanauki.pl/articles/348167.pdf
Data publikacji:
2016
Wydawca:
Akademia Wojsk Lądowych imienia generała Tadeusza Kościuszki
Tematy:
experimental mechanics
metallic glass
amorphous alloy
material properties
material science
Opis:
It is expected that damping in amorphous metals change after its recrystallization. For this purpose study of this phenomena was investigated. An alloy Fe75 Z r4Ti3B17Cu1 was manufactured in a very specific conditions to obtain amorphous structure. To confirm structure of the manufactured material basic testing was conducted including XRD, AFM, LFM and SEM with EDS attachment. The study showed that the structure in fact is partially amorphous and partially nanocrystalline. To determine expected change of damping sample in form of rod was tested for bounce height in controlled conditions before and after heat treatment that changed materials structure. Obtained results indicate decrease of damping after heat treatment and therefore confirms initial assumption.
Źródło:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki; 2016, 4; 123-134
1731-8157
Pojawia się w:
Zeszyty Naukowe / Wyższa Szkoła Oficerska Wojsk Lądowych im. gen. T. Kościuszki
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Hafnium and Zirconium to Glass Forming Ability, Thermal Stability, Plasticity Deformation and Crystallization of Ni-Free Pentabasic Ti-Based Bulk Metallic Glasses
Autorzy:
Oak, J.-J.
Kim, Y. H.
Bae, K.-C.
Park, Y. H.
Powiązania:
https://bibliotekanauki.pl/articles/352087.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Ti-based alloy
metallic glass
Ti fiber
glass formability
plastic deformation
Opis:
The newly designed Ti-based bulk metallic glass (BMG) in which case of fracture behavior was observed 1990MPa to compressive strength with a wide plastic deformation around 7% after process of elastic deformation. This phenomenon can be compared with those of Ti-based alloys and other Ti-based BMGs and indicates high potential to be applied in use. It was evaluated the Ti-based BMG for thermal stability that the reduced glass parameters, ΔTx, Trg and γ, are 79K, 0.50 and 0.38, respectively. In addition, it reveals high activation energies for crystallization in which are estimated to Ex1 = 291.77 ±9.71 kJ/mol, Ex2 = 588.77 ±28.88 kJ/mol and Ex3 = 330.26 ±3.61 kJ/mol on kissinger plotting in this study.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 2B; 1081-1087
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Phase Transformation Analysis of the Amorphous Mg72Zn24Ca4 Alloy
Autorzy:
Lelito, J.
Powiązania:
https://bibliotekanauki.pl/articles/947620.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Mg-Zn-Ca alloy
amorphous alloy
metallic glass
crystallization
stop Mg-Zn-Ca
stop amorficzny
szkło metaliczne
krystalizacja
Opis:
The paper presents research of metallic glass based on a Mg72Zn24Ca4 alloy. Metallic glass was prepared using induction melting and further injection on a spinning copper wheel. The X-ray diffractometer and differential scanning calorimeter (DSC) were used to investigate the phase transformation of the amorphous ribbon. The heat released in the crystallization process, during isothermal annealing, based on the differential scanning calorimeter investigation, was determined to be 166.18 Jg-1. The effect of isothermal annealing temperature on the kinetics of the amorphous alloy crystallization process using differential scanning calorimeter was investigated. For this purpose, two isothermal annealing temperatures were selected. The incubation time decreases as the temperature of the isothermal annealing increases from 300 to 252 seconds. The same relationship is visible in the case of duration of the phase transformation, which also decreases as the temperature of the isothermal annealing increases from 360 to 228 seconds. The obtained results show a significant influence of isothermal annealing temperature on the degree of phase transformation.
Źródło:
Archives of Foundry Engineering; 2020, 20, 3; 21-24
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication and Compressive Properties of Open-Cell Ni-Mo-Cr (Hastelloy) Foams Manufactured by Electrostatic Powder Spraying
Autorzy:
Kang, Tae-Hoon
Kim, Kyu-Sik
Lee, Min-Jeong
Yun, Jung-Yeul
Lee, Kee-Ahn
Powiązania:
https://bibliotekanauki.pl/articles/356501.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
metallic foam
electrostatic powder spraying
Ni-Mo-Cr alloy
sintering
compressive property
Opis:
An open-cell Ni-Mo-Cr foam was newly manufactured using electrostatic powder spraying process and its room-temperature compressive properties were investigated in this study. For manufacturing Ni-Mo-Cr foam, Ni-Mo-Cr powders were sprayed on the polyurethane pre-form by electrostatic powder spraying process. And then, Ni-Mo-Cr powder sprayed pre-forms were sintered at 1200°C, 1250°C, and 1300°C, respectively. The relative densities of Ni-Mo-Cr foams were measured at 4 ~ 5%. Room tempera-ture compressive curves of ESP Ni-Mo-Cr foams represented the typical compressive 3-stages (elastic, plateau, densification) of open-cell metallic foam. As a result of observation of deformed specimen, the fracture mode found to be changed from brittle to ductile as sintering temperature increased. Based on these findings, correlations between structural characteristics, microstructure, and compressive deformation behavior were also discussed.
Źródło:
Archives of Metallurgy and Materials; 2020, 65, 3; 1081-1086
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Własności reologiczne mieszaniny żywicy epoksydowej i stopu niskotopliwego
Rheological properties of epoxy resin and a low melting point alloy mixture
Autorzy:
Wierzbicki, Ł.
Orłowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/279098.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
lepkość
żywica epoksydowa
napełniacze metalowe
stop niskotopliwy
stop Wooda
viscosity
epoxy resin
metallic fillers
low melting point alloy
Wood's alloy
Opis:
Głównym celem niniejszego artykułu było przedstawienie lepkości dynamicznej oraz kinematycznej kompozytu żywicy epoksydowej i stopu niskotopliwego, a także określenie wpływu różnych czynników na zmiany lepkości mieszaniny. W pracy przedstawiono wyniki badań lepkości kompozytu. W badaniach wykorzystano jako osnowę kompozytu Epidian 6 oraz stop Wood’a jako napełniacz. Badania lepkości przeprowadzono w różnych temperaturach z zakresu 20÷90°C, za pomocą lepkościomierza Höpplera. Celem eksperymentu było sprawdzenie możliwości wykorzystania napełniacza metalicznego do zmiany lepkości materiałów polimerowych.
The main objective of this article was to present a dynamic and kinematic viscosity of the composite epoxy resin and low-melting alloy, as well as to determine the impact of various factors on the changes in viscosity of the mixture. The paper presents the results of research the viscosity of the composite. The study used as matrix composite Epidian 6 and Wood’s alloy as a filler. Viscosity test was carried out at various temperatures in the range 20 to 90 degrees Celsius, by Hoppler viscosimeter. The aim of the experiment was to verify the possibility of using the filler metal to change the viscosity of the polymer materials.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 6 (174), 6 (174); 588-594
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Surface Characterization of Metallic Fuel Slugs Prepared by Modified Injection Casting
Autorzy:
Mun, S.-U.
Kim, K.-H.
Oh, S.-J.
Park, J.-Y.
Hong, S.-I.
Powiązania:
https://bibliotekanauki.pl/articles/351428.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sodium-cooled fast reactor
metallic fuel slug
U-Zr alloy
surface characterization
injection casting
Opis:
Metallic fuel slugs containing rare-earth (RE) elements have high reactivity with quartz (SiO2) molds, and a reaction layer with a considerable thickness is formed at the surface of metallic fuel slugs. The surface characterization of metallic fuel slugs is essential for safety while operating a fast reactor at elevated temperature. Hence, it is necessary to evaluate the surface characteristics of the fuel slugs so that chemical interaction between fuel slug and cladding can be minimized in the reactor. When the Si element causes a eutectic reaction with the cladding, it deteriorates the metallic fuel slugs. Thus, it is necessary to examine the characteristics of the surface reaction layer to prevent the reaction of the metallic fuel slugs. In this study, we investigated the metallurgical characteristics of the surface reaction layer of fabricated U-10wt.%Zr-Xwt.%RE (X = 0, 5, 10) fuel slugs using injection casting. The results showed that the thickness of the surface reaction layer increased as the RE content of the metallic fuel slugs increased. The surface reaction layer of the metallic fuel slug was mainly formed by RE, Zr and the Si, which diffused in the quartz mold.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 1049-1053
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przewodność cieplna żywicy epoksydowej napełnianej stopem Wooda
Thermal conductivity of epoxy resin filled by Woods alloy
Autorzy:
Wierzbicki, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/278782.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Inżynierii Materiałów Polimerowych i Barwników
Tematy:
przewodność cieplna
żywica epoksydowa
napełniacze metalowe
stop niskotopliwy
stop Wooda
thermal conductivity
epoxy resin
metallic fillers
low melting point alloy
Wood's alloy
Opis:
W niniejszym artykule dokonano oceny wpływu obecności stopu niskotopliwego na przewodność cieplną żywicy epoksydowej. Drugą, nie mniej ważną, kwestią było zbadanie wpływu warunków przeprowadzania badania na wartość uzyskiwanego współczynnika przewodzenia ciepła. Głównym celem eksperymentu było określenie zmian przewodności cieplnej na skutek zmiany stanu fizycznego niskotopliwego napełniacza. W badaniach wykorzystano jako osnowę Epidian 6 i stop Wooda jako napełniacz. Badania przeprowadzono w różnych warunkach temperaturowych, co umożliwiło potwierdzenie założeń eksperymentu.
This article describes the effect of adding low-melting alloy on the thermal conductivity of the epoxy resin. The second, no less important issue was investigate the influence of the research conditions on the value obtained thermal conductivity. The main purpose of this experiment was to determine the thermal conductivity caused by changes in the physical state of the low-melting alloy filler. The study used as base Epidian 6 and Woods alloy as filler. Testing carried out in different temperature conditions, which allowed confirmation of the assumptions of the experiment.
Źródło:
Przetwórstwo Tworzyw; 2016, T. 22, Nr 6 (174), 6 (174); 581-587
1429-0472
Pojawia się w:
Przetwórstwo Tworzyw
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The comparison of the porosity formation in different casted secondary aluminium alloy
Autorzy:
Kuchariková, L.
Tillová, E.
Powiązania:
https://bibliotekanauki.pl/articles/114817.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
secondary aluminium alloy
porosity
sand mould
metallic mould
wtórny stop aluminium
porowatość
forma piaskowa
forma metalowa
Opis:
The porosity formation in secondary aluminium cast alloys are one of the main aspect which can affect the final properties of casts. Whereas these materials are especially used for production the automotive casts such as engine blocks, cylinder head, chassis components and so on, it is need the production of the casts without deleterious defects. The contributions deals with comparison of the porosity formation in secondary AlSi9Cu3 cast alloy when different moulds (the metallic mould and sand mould) for casting were used. The material was gravity casted in the both mould. The differences in microstructure and porosity formation were studied by using light metallography microscopy and image analyser software. The evolution shows that the experimental material casted into the metallic mould had about 98.78% smaller porosity size in comparison to the material casted into the sand mould, therefore it showed better properties.
Źródło:
Zeszyty Naukowe. Quality. Production. Improvement; 2017, 1 (6); 12-19
2544-2813
Pojawia się w:
Zeszyty Naukowe. Quality. Production. Improvement
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ rekrystalizacji na właściwości tłumiące stopu Fe75Zr4Ti3B17Cu1
Influence of recrystallization on damping properties of Fe75Zr4Ti3B17Cu1 alloy
Autorzy:
Bocian, M.
Mech, R.
Myszka, W.
Przybylski, M.
Powiązania:
https://bibliotekanauki.pl/articles/131330.pdf
Data publikacji:
2016
Wydawca:
Uczelnia Jana Wyżykowskiego
Tematy:
mechanika eksperymentalna
szkło metaliczne
stop amorficzny
właściwości materiałowe
inżynieria materiałowa
experimental mechanics
metallic glass
amorphous alloy
material properties
material science
Opis:
Uważa się, że tłumienie w przypadku metali o strukturze amorficznej powinno ulec zmianie po ich rekrystalizacji. W niniejszej pracy przedstawiono wyniki badań tego zagadnienia. Badania przeprowadzono na stopie Fe75Zr4Ti3B17Cu1 wykonanym w taki sposób, aby otrzymać materiał o strukturze amorficznej. W celu określenia oczekiwanej zmiany w tłumieniu badanego materiału, przeprowadzono badania polegające na pomiarze wysokości odbicia, dla próbki przed obróbką termiczną i po takiej obróbce. Otrzymane rezultaty pokazały, że względne tłumienie próbki uległo zmniejszeniu po poddaniu jej obróbce cieplnej, tym samym potwierdzając wstępne założenia.
It is expected that damping in amorphous metals changes after their recrystallization. For this purpose a study of this phenomena was investigated. A Fe75Zr4Ti3B17Cu1 alloy was manufactured in very specific conditions to obtain amorphous structure. To determine expected change of damping, a sample in form of a rod was tested for bounce height in controlled conditions before and after heat treatment that changed the material structure. The obtained results indicate a decrease of damping after heat treatment and therefore confirm the initial assumption.
Źródło:
Zeszyty Naukowe Uczelni Jana Wyżykowskiego. Studia z Nauk Technicznych; 2016, 5; 65-74
2543-6740
Pojawia się w:
Zeszyty Naukowe Uczelni Jana Wyżykowskiego. Studia z Nauk Technicznych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Use of Barium and Calcium Alloys in the Ladle Furnace Treatment of Selected Grades of Continuously Cast Steels
Zastosowanie stopów baru i wapnia w obróbce pozapiecowej wybranych gatunków stali odlewanych w sposób ciągły
Autorzy:
Derda, W.
Lawenda, P.
Pardela, P.
Powiązania:
https://bibliotekanauki.pl/articles/353156.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
continuous casting of steel
non-metallic inclusion modification
calcium-barium alloy
steel castability
ciągłe odlewanie stali
modyfikacja wtrąceń niemetalicznych
stop wapń-bar
stal odlewana
Opis:
The subject of the paper are the results of laboratory and industrial investigations into the use of Si - Ca - Ba alloys for modifying non-metallic inclusions. Based on laboratory tests, the morphology and chemical composition of non-metallic inclusions in carbon steel were examined before and after refining with the use of the above-mentioned alloy as a refining addition. In particular tests, variable additions of the alloy were used at a constant refining time and temperature. Comparison of the process of casting of a sequence of seven heats of the same steel grade using the stopper system in the tundish was made under industrial conditions. In these heats, additions of Si - Ca (three heats) and Si - Ca - Ba (four heats) were introduced as a non-metallic inclusion modifier in the form of core wires during the process in the ladle furnace. For the investigated heats, the contents of total oxygen and calcium were assayed in the finished steel. A significant effect of the simultaneous addition of barium and calcium on steel castability, and thus on the process of continuous casting of the investigated heats, was found.
Przedmiotem opracowania są wyniki badań laboratoryjnych oraz przemysłowych, dotyczących zastosowania stopów Si - Ca - Ba do modyfikacji wtrąceń niemetalicznych. Na podstawie badań laboratoryjnych zbadano morfologię i skład chemiczny wtrąceń niemetalicznych w stali węglowej przed i po rafinacji przy zastosowaniu ww. stopu w charakterze dodatku rafinacyjnego. W poszczególnych próbach zastosowano zmienne dodatki stopu przy stałym czasie i temperaturze rafinacji. W warunkach przemysłowych dokonano porównania przebiegu odlewania sekwencji siedmiu wytopów tego samego gatunku stali z zastosowaniem układu zatyczkowego w kadzi pośredniej. W wytopach tych podczas procesu w piecu kadziowym wprowadzono w charakterze modyfikatora wtrąceń niemetalicznych dodatki Si - Ca (trzy wytopy) oraz Si - Ca - Ba (cztery wytopy) w postaci drutów rdzeniowych. Dla badanych wytopów w gotowej stali oznaczono zawartości tlenu całkowitego oraz wapnia. Stwierdzono istotny wpływ jednoczesnego dodatku baru i wapnia na lejność stali, a tym samym na przebieg ciągłego odlewania badanych wytopów.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 1; 281-288
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza wtrąceń niemetalicznych w odlewach ze stopu AZ91 wykonanych z udziałem złomu obiegowego w procesie wysokociśnieniowego odlewania
Analysis of non-metallic inclusions in AZ91 alloy casts with process foundry return in high-pressure die casting
Autorzy:
Konopka, Z.
Chojnacki, A.
Powiązania:
https://bibliotekanauki.pl/articles/391510.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
odlewanie ciśnieniowe
stop AZ91
wtrącenia niemetaliczne
mikrostruktura
złom obiegowy
high-pressure die casting
alloy AZ91
non-metallic inclusions
microstructure
process foundry return
Opis:
W artykule przedstawiono wyniki badań wpływu udziału złomu obiegowego we wsadzie stopu AZ91 na zmianę struktury odlewów wykonanych metodą wysokociśnieniowego odlewania, ze szczególnym uwzględnieniem tworzenia się wtrąceń niemetalicznych. Na podstawie obserwacji wtrąceń metodą mikroskopii skaningowej określono skład chemiczny tych wtrąceń w wytopach z różnym udziałem złomu obiegowego we wsadzie.
The article presents research results of the process foundry return influence in the AZ91 alloy charge on the change in the structure of castings made by the high-pressure casting method, with special consideration of the formation of non-metallic inclusions. Based on the observations of inclusions by the scanning microscopy method, the chemical composition of the inclusions in melts with different process scrap contents in the charge was determined.
Źródło:
Prace Instytutu Odlewnictwa; 2016, 56, 4; 321-328
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characterization of Ca50Mg20Zn12Cu18 Alloy
Autorzy:
Hrapkowicz, B.
Lesz, S.T.
Powiązania:
https://bibliotekanauki.pl/articles/379850.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
Calcium alloy
implant
metallic glass
Magnesium
Calcium
Zinc
Copper
corrosion
corrosion resistance
stopy wapnia
szkło metaliczne
magnez
wapń
cynk
miedź
korozja
odporność na korozję
Opis:
The Ca50Mg20Zn12Cu18 was assessed with different methods in order to characterize its basic characteristics, and to determine whether the amorphous alloy of such composition would be applicable as an implant material. The XRD analysis was conducted to conclude the structure of the initial material. The Ca50Mg20Zn12Cu18 ingot sample demonstrates crystalline structure containing two main intermetallic phases, however as-cast plates show features of an amorphous material, revealing the characteristic amorphous halo on the x-ray patterns. It was confirmed by the scanning electron microscopy method and fracture images revealing chevron pattern morphology with shell type fracture. Corrosion resistance, was studied using the potentiostatic analysis. The amorphous samples show higher resistance than the crystalline one. Post corrosion surface of the Ca50Mg20Zn12Cu18 alloy exhibits high concentration of magnesium and calcium hydroxides, forming the globular structures in large aggregates of spherical units.
Źródło:
Archives of Foundry Engineering; 2019, 1; 75-82
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies