Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "membrane technology" wg kryterium: Temat


Wyświetlanie 1-9 z 9
Tytuł:
Oczyszczanie ścieków koksowniczych w układzie zintegrowanym łączącym proces koagulacji z ciśnieniowymi technikami membranowymi
Coking wastewater treatment in the integrated system coagulation - pressure membrane techniques
Autorzy:
Mielczarek, K.
Kwarciak-Kozłowska, A.
Bohdziewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/1819445.pdf
Data publikacji:
2011
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
ścieki koksownicze
techniki membranowe
coking wastewater
membrane technology
Opis:
Z uwagi na ograniczone zasoby gazu i ropy naftowej podstawowym surowcem energetycznym w Polsce jest nadal węgiel kamienny, wykorzystywany m.in. do produkcji paliw koksowniczych w procesie pirolizy [1]. Jak wiadomo zakłady koksownicze niekorzystnie oddziaływają na środowisko naturalne między innymi z uwagi na generowanie podprocesowych wód koksowniczych obciążonych trudno biodegradowalnymi (BZT5/ChZT<0,02) substancjami toksycznymi [2]. W ich skład wchodzą między innymi: wielopierścieniowe węglowodory aromatyczne, związki heterocykliczne, oleje, substancje smołowe oraz związki nieorganiczne tj.: cyjanki, siarczki, siarczany, tiosiarczany, amoniak, a także jony metali ciężkich [3]. Z tego też względu ścieki koksownicze przed odprowadzeniem do odbiornika powinny być poddane procesowi oczyszczania. W zależności od rodzaju zanieczyszczeń metody ich oczyszczania powinny być tak dobrane, aby przy jak najniższych nakładach finansowych zapewnić najwyższy stopień usunięcia zanieczyszczeń. Zwiększenie efektywności oczyszczania ścieków wiąże się z rozbudową systemów ich oczyszczania o nowe procesy jednostkowe lub sprowadza się do modyfikacji układów już pracujących. Z uwagi na coraz bardziej złożony skład przemysłowych strumieni odpadowych do ich oczyszczania stosuje się układy zintegrowane kojarzące odpowiednie procesy jednostkowe. Wśród metod fizyczno-chemicznych stosowanych w przypadku ścieków obciążonych zanieczyszczeniami występującymi w postaci koloidów i drobnej zawiesiny bardzo często wykorzystywany jest proces koagulacji. Obiecującym rozwiązaniem w oczyszczaniu ścieków koksowniczych wydaje się być zastosowanie układu zintegrowanego łączącego koagulację z ultrafiltracją i odwróconą osmozą [4÷6]. W pracy omówiono wpływ procesu koagulacji na poprawę efektywności oczyszczania poprocesowych wód koksowniczych w układzie łączącym ciśnieniowe techniki membranowe tj. ultrafiltrację z odwróconą osmozą.Podjęto również próbę określenia możliwości prognozowania wielkości ultrafiltracyjnych strumieni permeatów zarówno w procesie oczyszczania ścieków koksowniczych w układzie łączącym ciśnieniowe procesy membranowe jak i w przypadku kiedy wody poprocesowe były wstępnie podczyszczane metodą koagulacji.
The paper presents results of studies aimed at determining the effectiveness of coking wastewater treatment in two integrated systems. In one system wastewater is treated using combined processes of ultrafiltration and reverse osmosis. In the second system, to increase the efficiency of wastewater treatment, an additional step of treatment is introduced - initial volume coagulation. Low-pressure membrane filtration process was carried out on membrane made of polysulfone 16% by weight. The participation of film-forming polymer in solution and during the evaporation of the solvent from the membrane surface equal to 5 s. The introduction of coking wastewater pretreatment by coagulation method resulted in the removal of such contaminants which are present mainly in the form of colloidal and macromolecular substances and thus provided a more efficient membrane ultrafiltration in the next stage of purification. Treatment of wastewater after the filtration process was performed by low-pressure reversed osmosis on membrane of polyamidetype ADF's Osmonics. Basing on assumptions of relaxation model, describing the changes in permeate flux during membrane filtration system carried out in non-stationary system, attempt to determine the possibilities of predicting the size of ultrafiltration permeate fluxes was made.
Źródło:
Rocznik Ochrona Środowiska; 2011, Tom 13; 1965-1984
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of Hydrocyclones to Improve Membrane Technologies for Urban Wastewater Treatment
Autorzy:
Kassymbekov, Zhuzbay
Akmalaiuly, Kenzhebek
Kassymbekov, Galimzhan
Powiązania:
https://bibliotekanauki.pl/articles/1839644.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
waste water
post-treatments
membrane technology
hydrocyclone
testing
Opis:
The technologies associated with the use of a membrane bioreactor (MBR) are becoming one of the dynamically developing directions in the wastewater disposal system. However, a certain part of the used design of membrane units are exposed to mechanical contamination, which significantly impairs their performance. This is especially noticeable when working at wastewater treatment plants, where the required degree of preliminary cleaning from solid mechanical particles and suspended solids is not provided. The purpose of the work was to improve the process of post-treatment of urban wastewater and protect the membrane element of the installation from clogging with coarse impurities and wear, with an overestimated concentration of suspended solids. The essence of the improved membrane technology of wastewater treatment consists in the preliminary capture of heavy and suspended particles with a size of more than 0.03 microns in a hydrocyclone, followed by water treatment in a chamber of a membrane bioreactor of modern design. The operating conditions of the membranes were determined by the operating modes and parameters of the bioreactor, in particular, by the degree of formation of colloidal compounds in it, which adversely affect the permeability. The density of the initial water varied within 1.059–1.078 g/cm3, and the content of solid particles was up to 0.3 mm. The activated sludge was filtered under vacuum on a Buchner funnel through a thin layer of cotton wool and gauze. During the tests, the indicators for capturing suspended solids were 5.0–9.0 mg/dm3, whereas, when working without a hydrocyclone, they were equal to 27–30 mg/dm3. The maximum performance of the hydrocyclone is provided at an inlet pressure of 225–300 kPa, and the pressure loss in the hydrocyclone chamber is 7.9–9.0 kPa. It was established that additional preparation of waste water for the post-treatment process using a hydrocyclone increases the cleaning capacity of membrane elements by reducing the load of accumulation of coarse impurities on the membrane surface.
Źródło:
Journal of Ecological Engineering; 2021, 22, 4; 148-155
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The performance assessment of reverse osmosis stations at Al-Mahalabea area
Autorzy:
Ahmed, Mohammed F.
Powiązania:
https://bibliotekanauki.pl/articles/118750.pdf
Data publikacji:
2020
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
brackish water
desalination
membrane technology
reverse osmosis
SAW
TOPSIS
Opis:
The present study assesses RO stations at four sites in Al-Mahalabea area – Nineveh governorate, Iraq during the summer of 2013. The performance of RO stations are ranked by two methods: the Simple Additive Weight (SAW) and the Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS). Two groups of samples were collected from feed and permeate water for two periods (at zero time of operation and after ten weeks of operation) with eleven parameters for each sample were analysed. The highest overall rejection R efficiency appeared with the first set of parameters more than 90% (SO4, TDS, NO3, TH, and turbidity), while the second set was the least (Cl, Na, and total alkalinity – TA) ranged between 65 and 85%. It is observed that both the SAW and the TOPSIS methods are accurate to predict the performance efficiency.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2020, 29, 3; 332-342
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regeneration of polymer and ceramic modules with the use of recovered single-phase detergent. Dairy industry case study
Autorzy:
Kowalska, Izabela
Powiązania:
https://bibliotekanauki.pl/articles/2171848.pdf
Data publikacji:
2022
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
dairy industry
membrane separation
dairy wastewater
membrane technology
przemysł mleczarski
separacja membranowa
ścieki mleczarskie
technologia membranowa
Opis:
The effectiveness of recovered washing compositions containing single-phase detergents from cleaning-in-place (CIP) systems as solutions for the regeneration of membrane modules fouled during the filtration of wastewater from the prerinsing of the production line (white water) was assessed. The influence of process parameters (regeneration time, transmembrane pressure, cross-flow velocity, and solution temperature) on relative flux recovery was evaluated. A significantly higher regeneration efficiency of the ceramic and polymeric modules was obtained for the alkaline detergent compared to that of the acid formula. The key process parameters for the regeneration cycle were the contact time of the module with the cleaning detergent and its temperature. The influence of transmembrane pressure and cross-flow velocity on module permeability was negligible. Filtration experiments with white water confirmed that the membrane separation process is suitable for the recovery of milk compounds from dairy effluents.
Źródło:
Environment Protection Engineering; 2022, 48, 4; 85--96
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Alternative Solutions to Optimalisation of the Gassing-up Operation After Tanks Inerting Using Pressure Swing Adsorption (PSA) and Membrane Techniques
Alternatywne rozwiązania dla optymalizacji procesu zagazowania zbiorników ładunkowych po inertowaniu w odniesieniu do PSA (Pressure Swing Adsorption) i technologii membranowej
Autorzy:
Wieczorek, A.
Powiązania:
https://bibliotekanauki.pl/articles/342015.pdf
Data publikacji:
2018
Wydawca:
Uniwersytet Morski w Gdyni. Wydawnictwo Uniwersytetu Morskiego w Gdyni
Tematy:
gas separation
pressure swing adsorption
membrane technology
nitrogenethylene composition
separacja gazów
technologia membranowa
mieszanina azot-etylen
Opis:
The article constitutes the introduction to finding a solution to a problem concerning carrying gassing-up operation in a more efficient way in terms of loosing ethylene cargo. To begin with, the impact of nitrogen presence on ethylene cascade cycle’s technical work and cooling capacity has been described. Further, the results of investigation into methods of nitrogen removing from cargo tanks after gassing-up have been presented. Possibility of pressure swing adsorption (PSA) and membrane techniques use has been analyzed with reference to ethylene carriers.
Artykuł stanowi wprowadzenie do rozwiązania problemu przeprowadzenia operacji gassing-up w sposób bardziej efektywny w odniesieniu do znacznych ilości „traconego” ładunku. W pierwszej kolejności opisano wpływ obecności azotu na pracę obiegu. W dalszej części przeanalizowano dostępne metody usunięcia azotu podczas operacji gassing-up. Opisano metody PSA (Pressure Swing Adsorption) oraz membrany i przeanalizowano je w odniesieniu do etylenowców.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Gdyni; 2018, 105; 136-144
1644-1818
2451-2486
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Gdyni
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Carbon dioxide separation technologies
Technologie separacji dwutlenku węgla
Autorzy:
Czarnota, Robert
Knapik, Ewa
Wojnarowski, Paweł
Janiga, Damian
Stopa, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/219359.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wychwyt CO2
technologia membran
absorpcja
separacja kriogeniczna
CO2 capture
membrane technology
absorption
cryogenic separation
Opis:
CO2 emission from combustion fossil fuels is considered as the primary factor in the global warming. Different methods for separation CO2 from combustion flue gases are extensively used across the world. The aim of this study is to analyze the most important technological solutions of CO2 separation. For this reason chemical absorption, physical absorption, adsorption approach, membrane filtration and cryogenic process were researched. Concluding, selection of the right method for carbon dioxide capture separation is a complex issue and a range of technological and economic factors should be taken into consideration prior to application on the industrial scale.
Emisja CO2 do atmosfery pochodząca ze spalania paliw kopalnych jest uważana za główny czynnik globalnego ocieplenia. Różne metody oddzielania CO2 od gazów spalinowych są szeroko stosowane na ca-łym świecie. Celem niniejszego artykułu jest analiza najważniejszych technologicznych rozwiązań separacji CO2. W tym celu przeanalizowano następujące metody: absorpcja chemiczna, absorpcja fizyczna, adsorpcja, filtracja membranowa i proces kriogeniczny. Podsumowując, wybór właściwej metody separacji dwutlenku węgla pod kątem wychwytu dwutlenku węgla jest złożonym zagadnieniem, a przed zastosowaniem na skalę przemysłową należy wziąć pod uwagę szereg czynników, w tym technologiczne i ekonomiczne.
Źródło:
Archives of Mining Sciences; 2019, 64, 3; 487-498
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermodynamic evaluation of supercritical oxy-type power plant with high-temperature three-end membrane for air separation
Autorzy:
Kotowicz, J.
Balicki, A.
Michalski, S.
Powiązania:
https://bibliotekanauki.pl/articles/240116.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
oxy-combustion
membrane technology
air separation unit
thermodynamic evaluation
oxy-spalanie
technologie membranowe
separator powietrza
ocena termodynamiczna
Opis:
Among the technologies which allow to reduce greenhouse gas emissions, mainly of carbon dioxide, special attention deserves the idea of 'zero-emission' technology based on boilers working in oxy-combustion technology. In the paper a thermodynamic analysis of supercritical power plant fed by lignite was made. Power plant consists of: 600 MW steam power unit with live steam parameters of 650°C/30 MPa and reheated steam parameters of 670°C/6 MPa; circulating fluidized bed boiler working in oxy-combustion technology; air separation unit and installation of the carbon dioxide compression. Air separation unit is based on high temperature membrane working in three-end technology. Models of steam cycle, circulation fluidized bed boiler, air separation unit and carbon capture installation were made using commercial software. After integration of these models the net electricity generation efficiency as a function of the degree of oxygen recovery in high temperature membrane was analyzed.
Źródło:
Archives of Thermodynamics; 2014, 35, 3; 105-116
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A new pilot-scale membrane unit for the study of pro-ecological pressure processes
Nowa pilotowa instalacja do badań proekologicznych ciśnieniowych procesów membranowych
Autorzy:
Kluziński, W.
Gierycz, P.
Powiązania:
https://bibliotekanauki.pl/articles/257316.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
procesy membranowe
aparatura
czyste technologie
technologie czyszczące
membrane processes
apparatus
clean technology
cleaning technology
Opis:
The new, integrated pilot installation for the investigation of pressure membrane processes, concerning wastewaters has been presented. Its process parameters and main process modules (MF, UF, NF and RO) have been fully described and discussed from the point of view of different applications. Results of the influence of different flows on the process modules as well as the primary results of tannery wastewater purification have been given and discussed.
Zaprezentowano nową instalację pilotową zaprojektowaną, wykonaną i uruchomioną przez autorów w celu prowadzenia w skali półtechnicznej badań technologicznych oczyszczania ścieków przemysłowych z zastosowaniem ciśnieniowych procesów membranowych. Opisano zasadnicze parametry techniczne instalacji i możliwości badawcze z wykorzystaniem określonych modułów wyposażonych w elementy membranowe do mikro-, ultra-, nanofiltracji i odwróconej osmozy w różnych układach procesowych. Przeprowadzono badania hydrauliki przepływów w posiadanych elementach membranowych dla wody wodociągowej. Omówiono rezultaty wstępnych badań oczyszczania modelowych ścieków garbarskich przygotowanych z wody wodociągowej i chemikaliów o czystości technicznej. Potwierdzono zdolność instalacji do znacznego obniżenia stężenia tłuszczów, białek i chromu(III) w tych ściekach w warunkach półtechnicznych.
Źródło:
Problemy Eksploatacji; 2008, 2; 83-89
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of a gas turbine used in a high temperature membrane air separation unit
Autorzy:
Kotowicz, J.
Michalski, S.
Powiązania:
https://bibliotekanauki.pl/articles/359807.pdf
Data publikacji:
2012
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
pulverized-fuel boiler
oxy-combustion technology
“four end” membrane separator
Opis:
In this article computational algorithm and exemplary results for a model of an air separation unit (ASU) with “four end” high temperature membrane (HTM) were presented. First, the software environment for building of a "four end" membrane separator model was chosen. Then, a model of an air separation unit was created and preliminary calculations were made on that model. The air separation unit structure consists of a “four end” membrane, heat exchanger, electrical generator, air compressor and expander. Parameter that determines all flows in the ASU model is the oxygen mass flow rate. This mass flow rate is approximately the same as oxygen mass flow rate feeding oxy boiler working in a 460 MW power plant. The most important step of this paper was the integration of a model of pulverized fuel boiler in the oxy-combustion technology and the air separation unit model by sending flue gas from boiler to ASU. The characteristics of ASU such as power and efficiency as a function of the oxygen recovery rate were made. Maximal value of oxygen recovery rate was calculated. The difference between optimal compressor pressure ratio of the autonomic gas turbine and of the air separation unit are presented in this paper.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2012, 31 (103); 128-133
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-9 z 9

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies