Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "membrane process" wg kryterium: Temat


Tytuł:
Application of Fenton Reaction and Nanofiltration for the Recovery of Process Water
Zastosowanie procesu Fentona i nanofiltracji do odzysku wody technologicznej
Autorzy:
Żyłła, Renata
Kos, Lech
Powiązania:
https://bibliotekanauki.pl/articles/234017.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
membrane filtration
Fenton process
textile wastewater
filtracja membranowa
proces Fentona
ścieki tekstylne
Opis:
In this study, the Fenton process and nanofiltration were used to purify wastewater from dyeing with reactive dyes. Ferrous sulfate doses ranging from 100 to 1000 mg/dm3 and hydrogen peroxide doses ranging from 2.5 to 10 cm3/dm3were applied. It was found that in the whole range of ferrous sulfate doses, the degree of decolorisation was very high, reaching 97-99%. Consequently the wastewater from the Fenton process was practically completely decolorised. In the case of COD, with increasing doses of ferrous sulfate, the reduction rate initially increased from 25 to 38% and then decreased to 28%. An increase in the hydrogen peroxide dose resulted in a rise in COD reduction to about 50%. It was found that application of the Fenton reaction before the nanofiltration process improved filtration parameters. A clear reduction in the fouling effect of the membrane in the integrated wastewater treatment process was reported as compared to nanofiltration alone.
W pracy zastosowano proces Fentona i nanofiltrację do oczyszczania ścieków pochodzących z procesów barwienia barwnikami reaktywnymi. Stosowano dawki siarczanu żelazawego w zakresie od 100 do 1000 mg/dm3 i dawki nadtlenku wodoru w zakresie od 2,5 do 10 cm3/dm3. Stwierdzono, że w całym zakresie stosowanych dawek siarczanu żelazawego uzyskany stopień odbarwienia ścieków był bardzo wysoki rzędu 97-99%. Tak więc ścieki po procesie Fentona były praktycznie całkowicie odbarwione. W przypadku ChZT wraz ze zwiększaniem stosowanej dawki siarczanu żelazawego stopień redukcji początkowo wzrósł z 25 do 38%, a następnie obniżył się do poziomu 28%. Zwiększając dawkę nadtlenku wodoru uzyskano wzrost stopnia redukcji ChZT do około 50%. Stwierdzono, że zastosowanie procesu Fentona przed procesem nanofiltracji pozwoliło na poprawę parametrów filtracji. Odnotowano wyraźne zmniejszenie „efektu foulingu” membrany w zintegrowanym procesie oczyszczania ścieków, w porównaniu z samą nanofiltracją.
Źródło:
Fibres & Textiles in Eastern Europe; 2019, 2 (134); 101-106
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Koncepcja wydzielania ditlenku węgla ze spalin w procesie hybrydowym
The capture of carbon dioxide from flue gases in a hybrid process
Autorzy:
Warmuziński, K.
Tańczyk, M.
Jaschik, M.
Janusz-Cygan, A.
Powiązania:
https://bibliotekanauki.pl/articles/283084.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
wydzielanie ditlenku węgla
proces hybrydowy
adsorpcja zmiennociśnieniowa
carbon dioxide capture
hybrid process
pressure swing adsorption
membrane separation
Opis:
Jedną z dróg ograniczania emisji ditlenku węgla jest usuwanie go ze strumieni gazów odlotowych. W niniejszej pracy przedstawiono koncepcję wydzielania CO2 ze spalin w procesie hybrydowym, łączącym adsorpcję zmiennociśnieniową (PSA) i separację membranową. W szczególności omówiono podstawowe założenia obu węzłów separacji, sformułowane na podstawie analizy literatury przedmiotu oraz wyników własnych badań doświadczalnych i symulacji numerycznych. Stwierdzono, że w proponowanym układzie możliwy będzie prawie 100% odzysk ditlenku węgla w strumieniu gazu o stężeniu CO2 wynoszącym powyżej 95% z mieszaniny zawierającej 13,3 % CO2 i 86,7 % N2. Na podstawie przedstawionej w tej pracy koncepcji wydzielania ditlenku węgla ze spalin budowana jest w Instytucie Inżynierii Chemicznej PAN w Gliwicach instalacja demonstracyjna oraz opracowywany jest symulator numeryczny procesu hybrydowego.
Directive 2009/31/WE concerning geological storage of carbon dioxide (the so-called CSS Directive) is yet another step taken by the EU in limiting CO2 emissions. Since free emission quotas are going to be phased out, our energy sector will be compelled to implement the various CO2 abatement options or, alternatively, buy emission permits. The present study describes a technique for the removal of CO2 from flue gases via a hybrid process which combines pressure swing adsorption (PSA) and membrane separation. The scheme of the process is shown in Fig. 1. The procedure for selecting an appropriate adsorbent for the PSA unit is discussed. In Fig. 2 experimental CO2 adsorption isotherms are shown for a temperature of 20C. In Fig. 3 a dependence is presented of the CO2/N2 selectivity coefficient on pressure (Eq. 1) for both zeolite molecular sieves (ZMS) 13X and activated carbons. It is found that, from the standpoint of CO2 separation efficiency, ZMS 13X perform better than the activated carbons studied. In Table 1 the proposed PSA cycle is shown. Based on extensive simulations the efficiency of the PSA unit is assessed. As can be seen from Fig 4, at feed flow rates below 7.5 mn 3/h it is possible to obtain an enriched product that contains over 70 vol. % of CO2, with an almost complete recovery. In addition, experiments were carried out for the separation of a mixture containing 70% of CO2 and 30% of N2, using commercial membrane modules. Figs. 5, 6 and 7 shows, respectively, permeate and retentate CO2 concentrations and the cut ratio as functions of the pressure difference between the feed side and the permeate side of the module (p). It is concluded that the membrane unit can increase the concentration of carbon dioxide from 70% to over 95%, which is quite sufficient in terms of transport and storage. Based on the technique proposed in this study a demonstration installation is currently under construction in the Institute of Chemical Engineering, Polish Academy of Sciences. Also, a versatile numerical simulator for the hybrid CO2 separation is being developed.
Źródło:
Polityka Energetyczna; 2011, 14, 2; 427-439
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nanofiltration as an effective method of NaOH recovery from regenerative solutions
Proces nanofiltracji jako efektywna metoda odzysku NaOH z roztworów poregeneracyjnych
Autorzy:
Urbanowska, Agnieszka
Kabsch-Korbutowicz, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/205095.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
recovery
nanofiltration
NaOH solution
chemical cleaning
pressure-driven membrane process
poprawa
nanofiltracja
roztwór NaOH
czyszczenie chemiczne
proces membranowy napędzany ciśnieniem
Opis:
The objective of this study was to determine the suitability of the nanofiltration (NF) process to recover the regenerating agent (NaOH) from spent solutions contaminated with organic compounds. NaOH recovery from 2 spent regenerant solutions after cleaning ultrafiltration (UF) membranes (polymeric 30 kDa, ceramic 300 kDa) fouled with natural humic water was carried out using 2 types of NF membranes: NP010P (Na2SO4 rejection: 35–75%) and NP030P (Na2SO4 rejection: 80–95%). It has been shown that the use of the NP030P membrane allows for very high separation efficiency of organic compounds (up to 97% of color intensity reduction) from the tested solutions. It was also observed that the effectiveness of the process, in addition to the type of membrane used, also depends on the time of NF process – along with the elapsed time of the process, the hydraulic and separation properties of the tested membranes deteriorated. The obtained results showed that the use of both tested NF membranes allows for the recovery of NaOH to a degree that allows its re-use.
W przeprowadzonych badaniach określono przydatność procesu nanofiltracji (NF) do odzysku czynnika regenerującego (NaOH) z roztworów poregeneracyjnych zanieczyszczonych związkami organicznymi. Uzyskane wyniki pokazały, że użycie obu testowanych membran nanofiltracyjnych (NP010P oraz NP030P) pozwala na odzysk NaOH w stopniu pozwalającym na jego ponowne użycie. Wykazano, że zastosowanie membrany NP030P pozwala na uzyskanie bardzo wysokiej skuteczności separacji związków organicznych (do 97% usunięcia barwy) z testowanych roztworów. Zaobserwowano również, że skuteczność procesu, oprócz rodzaju użytej membrany, zależała także od czasu prowadzenia nanofiltracji – wraz z upływającym czasem procesu pogarszały się właściwości hydrauliczne i separacyjne testowanych membran.
Źródło:
Archives of Environmental Protection; 2019, 45, 2; 31-36
2083-4772
2083-4810
Pojawia się w:
Archives of Environmental Protection
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of diet on lipid peroxidation in liver microsomes, intestine brush border membrane and in blood serum of rats
Autorzy:
Tokarz, A.
Oledzka, R.
Sulinski, A.
Powiązania:
https://bibliotekanauki.pl/articles/1371726.pdf
Data publikacji:
1992
Wydawca:
Instytut Rozrodu Zwierząt i Badań Żywności Polskiej Akademii Nauk w Olsztynie
Tematy:
alpha-tocopherol
beta-carotene
liver microsome
intestine brush border membrane
blood serum
malondialdehyde
natural antioxidant
lipid peroxidation
rat
peroxidation process
diet
fat
liver
microsome
Źródło:
Polish Journal of Food and Nutrition Sciences; 1992, 01, 1
1230-0322
2083-6007
Pojawia się w:
Polish Journal of Food and Nutrition Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of membrane performance in the separation of carbon dioxide
Autorzy:
Tanczyk, M.
Warmuziński, K.
Janusz-Cygan, A.
Jaschik, M.
Powiązania:
https://bibliotekanauki.pl/articles/185597.pdf
Data publikacji:
2011
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
produkcja wodoru
proces hybrydowy
proces membranowy
hydrogen production
hybrid process
pressure swing adsorption
membrane process
Opis:
HY2SEPS was an EU-funded project directed at the reduction of C02 emissions. The principal objective of the project was to develop a hybrid membrane-adsorptive H2/C02 separation technique that would form an integral element of the pre-combustion process. Specific tasks included the derivation of simplified mathematical models for the membrane separation of H2/C02 mixtures. In the present study one of the developed models is discussed in detail, namely that with the countercurrent plug flow of the feed and the permeate. A number of simulations were carried out concerning the separation of binary mixtures that may appear following steam conversion of methane. The numerical results were then compared with the experimental data obtained by FORTH/ICEHT. The estimated fluxes of pure C02, H2, CH4 and N2 are shown alongside those measured experimentally as a function of temperature and C02 partial pressure in Figs 2 - 7. It is concluded that, in general, C02 flux increases monotonically with both temperature and C02 partial pressure. It is also found that the fluxes of hydrogen, methane and nitrogen reach a minimum at a temperature slightly above 323 K. Overall, a good agreement was obtained between the simulations and experiments.
Źródło:
Chemical and Process Engineering; 2011, 32, 4; 291-298
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the most effective operating conditions of membrane bioreactor used to industrial wastewater treatment
Autorzy:
Świerczyńska, A.
Bohdziewicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/208164.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
wastewater treatment
activated sludge process
bioconversion
bioreactors
industrial water treatment
landfill
leachate treatment
water treatment
activated sludge
dairy wastewater
industrial wastewater treatment
membrane bioreactor
municipal landfills
oczyszczalnia ścieków
proces osadu czynnego
biokonwersja
bioreaktory
uzdatnianie wody przemysłowej
uzdatnianie wody
osad czynny
ścieki mleczarskie
oczyszczanie ścieków przemysłowych
bioreaktor membranowy
składowiska odpadów komunalnych
Opis:
The effectiveness of co-treatment of leachates from an old site of municipal landfill with a dairy industry wastewater in a membrane bioreactor has been investigated. The subjects of the study were leachates collected at the municipal landfill in Tychy and dairy wastewaters from Dairy Plant in Bieruń. The determination of the most effective technological parameters of the process, i.e. activated sludge load and its concentration and types of COD fractions in the reactor influent was made. It was shown that the activated sludge load at the level of 0.06 g COD/(gDM·d) was the highest permissible one among all the investigated loads and the process run effectively within the whole investigated range of concentrations of activated sludge in a bioreactor. It was found that in the treated wastewater, the fraction of easily degradable organic compounds was the dominant one.
Źródło:
Environment Protection Engineering; 2015, 41, 1; 41-51
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Usuwanie zanieczyszczeń z wód w hybrydowym reaktorze membranowym przy współudziale procesu MIEX®DOC
Removal of contaminants from water in hybrid membrane reactor in cooperation MIEX®DOC process
Autorzy:
Rajca, M.
Powiązania:
https://bibliotekanauki.pl/articles/127542.pdf
Data publikacji:
2013
Wydawca:
Towarzystwo Chemii i Inżynierii Ekologicznej
Tematy:
proces MIEX DOC
ultrafiltracja
reaktor membranowy
oczyszczanie wód
MIEX DOC process
ultrafiltration
membrane reactor
water treatment
Opis:
Celem pracy było określenie efektywności usuwania zanieczyszczeń organicznych i nieorganicznych z wody w hybrydowym reaktorze membranowym, w którym realizowano proces wymiany jonowej i ultrafiltracji. W badaniach wykorzystano żywicę MIEX® firmy Orica Watercare oraz ultrafiltracyjny moduł kapilarny zanurzeniowy ZeeWeed 1 (ZW 1), pracujący w podciśnieniu, wykonany z polifluorku winylidenu, firmy GE Power&Water. Zastosowanie wielofunkcyjnego reaktora korzystnie wpływało na efektywność usuwania zanieczyszczeń, uzyskując wodę oczyszczoną wysokiej jakości, a w odniesieniu do procesu ultrafiltracji zminimalizowano problem foulingu membrany.
The aim of this study was to determine the effectiveness of removal of organic and inorganic contaminants from water using hybrid membrane reactor in which ion exchange and ultrafiltration processes were performed. MIEX® resin by Orica Watercare and immersed ultrafiltration polyvinylidene fluoride capillary module ZeeWeed 1 (ZW 1) by GE Power&Water operated at negative pressure were used. The application of multifunctional reactor had a positive effect on the removal of contaminants and enabled the production of high quality water. Additionally, in refer to single stage ultrafiltration it minimalized the occurrence of membrane fouling.
Źródło:
Proceedings of ECOpole; 2013, 7, 1; 393-398
1898-617X
2084-4557
Pojawia się w:
Proceedings of ECOpole
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reverse osmosis application in the recycling of zinc from the electroplating shop wastewater
Autorzy:
Porębski, T.
Tomzik, S.
Ratajczak, W.
Talma-Piwowar, M.
Koprowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/779885.pdf
Data publikacji:
2007
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
ścieki pogalwaniczne
odzysk cynku
procesy membranowe
osmoza odwrócona
galvanic wastewater
zinc recovery
membrane process
reverse osmosis
Opis:
The paper reveals the results of the research on the reverse osmosis recovery of zinc from galvanic electroplating. The pilot plant tests were performed in an electroplating shop. Raw washings were concentrated with a spiral wound 2.5x40" module with a composite polymeric membrane. The research tests have proved that the proposed RO process enables successful concentration of the non-ferrous metal in raw washings. The retentate of the RO process has contained about 96% of the metal previously wasted in washings discharged to the environment. The retentate can be recycled to the mother electroplating process. The permeate of the RO process can be recycled to the washing system of the electroplating shop.
Źródło:
Polish Journal of Chemical Technology; 2007, 9, 2; 90-93
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aquapores in lymnaeid snails
Autorzy:
Pienkowska, J.R.
Tomkowiak, E.
Lesicki, A.
Powiązania:
https://bibliotekanauki.pl/articles/83249.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Mikołaja Kopernika. Wydział Biologii i Ochrony Środowiska. Stowarzyszenie Malakologów Polskich
Tematy:
aquapore
lymnaeid snail
Lymnaea stagnalis
Stagnicola palustris
Catascopia occulta
snail
cell membrane
substance transport
physiological process
aquaporin
Źródło:
Folia Malacologica; 2012, 20, 1
1506-7629
Pojawia się w:
Folia Malacologica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Membrane reactor for enzymatic depolymerization – a case study based on protein hydrolysis
Autorzy:
Noworyta, A.
Trusek, A.
Wajsprych, M.
Powiązania:
https://bibliotekanauki.pl/articles/778609.pdf
Data publikacji:
2018
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
enzymatic membrane reactor
membrane selectivity
volume enzyme immobilization
biopolymer
hydrolysis
process efficiency
Opis:
The efficiency of enzymatic depolymerization in a membrane reactor was investigated. The model analysis was performed on bovine serum albumin hydrolysis reaction led by three different enzymes, for which kinetic equations have different forms. Comparing to a classic reactor, the reaction yield turns out to be distinctly higher for all types of kinetics. The effect arises from increasing (thanks to the proper selectivity of the applied membrane) the concentration of reagents in the reaction volume. The investigations indicated the importance of membrane selectivity election, residence time and at non-competitive inhibition the substrate (biopolymer) concentration in feed stream. Presented analysis is helpful in these parameters choice for enzymatic hydrolysis of different biopolymers.
Źródło:
Polish Journal of Chemical Technology; 2018, 20, 4; 44-48
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Accelerated and natural ageing processes change the properties of plasma membrane in Norway spruce (Picea abies (L.) Karst.) seeds during storage
Autorzy:
Nowakowska, J
Rakowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/41613.pdf
Data publikacji:
2002
Wydawca:
Polska Akademia Nauk. Instytut Dendrologii PAN
Tematy:
plasma membrane
Norway spruce
natural aging process
Picea abies
vitality
vigor
storage
seed
Opis:
The present study examines the mechanism of natural and accelerated ageing processes in Norway spruce (Picea abies [L.] Karst.) seeds stored at low temperature for one (control) and eight years. The analyses of vitality, electrolyte leakage, protein composition and activity of the proton-pump ATPase (P-ATPase, EC.3.6.1.35) in plasma membrane of Norway spruce seeds have been investigated. Seeds collected in 1999 from northeastern Poland have been treated with accelerated ageing method and compared to the seeds of the same provenance, collected in 1992 (control). The vigor and the vitality of the Norway spruce seeds depend on the age of seeds. After 6 days of experiment both samples of seeds (artificially aged seeds and control) expressed the same percentage of germination and similar electrolyte leakage. Analysis of protein composition in the extracts showed an increased amount of some low molecular-weight proteins in artificially and naturally aged seeds compared to the control. Our results indicate similar level of P-ATPase activity in natural, artificially aged and control seeds. This suggests that natural ageing process can involve changes in plasma membrane protein composition but does not affect the P-ATPase activity.
Źródło:
Dendrobiology; 2002, 47 Supplement
1641-1307
Pojawia się w:
Dendrobiology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Active Physical Remediation of Acid Mine Drainage: Technologies Review and Perspectives
Autorzy:
Mulopo, Jean
Powiązania:
https://bibliotekanauki.pl/articles/2105273.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
ion-exchange
acid mine drainage
electrochemical
adsorption
membrane process
active physical treatment
Opis:
The successful acid mine drainage (AMD) treatment needs site-specific installation and implementation, as well as the deployment of technology that is compatible with the pollutants contained in the AMD. If key by-products of the AMD can be recovered, the financial sustainability of the AMD remediation method may be greatly improved. Additional research into novel and innovative solutions is necessary to advance in this direction. To accomplish this, it is necessary to have a complete awareness of current remediation technologies that are available and accessible. Active physical treatment methods such as ion exchange, adsorption, electrochemistry, and membrane techniques were examined in this article. Membrane technology excels in terms of ease of use, versatility, and environmental effect but produces brine streams the management of which remains vital for future adoption of the technology. Liquid membranes (LM), Micellar Enhanced Ultra-Filtration (MEUF), and Polyelectrolyte Enhanced Ultra-Filtration (PEUF) are all innovative membrane technologies that may provide some possibilities for metal recovery from chemical sludge and/or brine streams. Electrochemical technologies are considered an attractive alternative for AMD treatment, because they require only electricity as a consumable and can treat AMD to high standards by removing metals via (co)precipitation and sulfate via ionic migration (when an anion-exchange membrane is used in the configuration), while producing significantly less sludge. However, the accepted shortcomings include membrane/electrode fouling produced by (co)precipitates on the active surfaces necessary for the process, a lack of understanding regarding the effective scaling up to industrial scale, and the relatively expensive capital expenditure (CAPEX) required. The removal of heavy metals from AMD effluents by adsorption has a number of technical and environmental benefits, including high efficiency, and environmental friendliness. Despite its benefits, this technique has certain hurdles, such as the production process for low-cost adsorbents.
Źródło:
Journal of Ecological Engineering; 2022, 23, 6; 148--163
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Baza danych procesów membranowych: MemData
Membrane processes database: MemData
Autorzy:
Mitkowski, P. T.
Broniarz-Press, L.
Powiązania:
https://bibliotekanauki.pl/articles/2070942.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
baza danych procesów membranowych
separacja membranowa
projektowanie procesów
membrana polimerowa
membrane database
membrane-based separation
polymeric membrane
process design
Opis:
Zazwyczaj dobór membranowych technik rozdziału dokonywany jest przez inżynierów na podstawie ich doświadczenia i analizy literatury. Jest to spowodowane znikomą wiedzą na temat permcatywności składników, w szczególności w mieszaninach wieloskładnikowych. Aby usprawnić wyszukiwanie stworzono bazę danych procesów membranowych MemData, która zawiera uporządkowane szeroko dostępne dane. W pracy przedstawiono strukturę MemData i przykłady jej zastosowania.
The membrane separation technique is selected by engineers mainly on basis of their experience and literature survey. It is caused by small availability of information on the prediction of component permeabilities in multicom-ponent mixtures. In order to facilitate the search, a membrane database, MemData, was created by collecting and adequate structuring the available data. In this paper the structure of MemData along with illustrative examples of its using are presented.
Źródło:
Inżynieria i Aparatura Chemiczna; 2010, 2; 81-82
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conceptual processes for zeolite membrane based hydroisomerization of light alkanes
Autorzy:
Maloncy, M. L.
Gora, L.
Jansen, J. C.
Maschmeyer, Th.
Powiązania:
https://bibliotekanauki.pl/articles/347005.pdf
Data publikacji:
2003
Wydawca:
Politechnika Bydgoska im. Jana i Jędrzeja Śniadeckich. Wydział Technologii i Inżynierii Chemicznej
Tematy:
zeolite membrane
hydroisomerization
separation
conceptual process
hexane
heptane
Opis:
A zeolite membrane reactor concept for the hydroisomerization of n-hexane was applied experimentally. The results indicate separation selectivities with factors close to 20 for n-, mono- and dibranched components in a gas mixture, as well as nhexane conversions up to equilibrium values. The research octane number calculated for the product stream of the different experiments indicates numbers as high as 85. For the hydroisomerization of C7 alkanes, a concept of two reactors and a zeolite membrane was proposed and an industrial scale process was simulated. A high octane number product containing tribranched, and a part of dibranched, C7 isomers is predicted. Although the product yield was calculated to be only 24% of the process feed, there was an improvement in a research octane number from 57 for the feed to 92 for the product. Both processes show that the application of zeolite membranes in the hydroisomerization of light alkanes can results in a octane number higher, than in the "state of the art" processes. The membrane unit, however, is the main cost driver of the processes, thus, the economical feasibility of industrial scale light alkanes hydroisomerization processes using zeolite membranes is restricted to its further commercial development.
Źródło:
Ars Separatoria Acta; 2003, 2; 18-28
1731-6340
Pojawia się w:
Ars Separatoria Acta
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Komputerowe projektowanie procesów membranowych na przykładzie odwróconej osmozy
Applicability of computer-aided design to reverse osmosis installation
Autorzy:
Majewska-Nowak, K.
Powiązania:
https://bibliotekanauki.pl/articles/236929.pdf
Data publikacji:
2007
Wydawca:
Polskie Zrzeszenie Inżynierów i Techników Sanitarnych
Tematy:
projektowanie komputerowe
proces membranowy
osmoza odwrócona
computer-aided design
membrane process
reverse osmosis
Opis:
Omówiono możliwości projektowania instalacji membranowych przy wykorzystaniu profesjonalnych programów komputerowych. Zwrócono uwagę na duże trudności w opracowywaniu modeli transportu masy podczas filtracji membranowej. W tym celu należy dysponować dokładnym opisem matematycznym hydrodynamiki systemu oraz pełną charakterystyką struktury membrany i składem cieczy zasilającej. Stwierdzono, iż w praktyce dostępne są jedynie modele odwróconej osmozy skonstruowane przy wielu założeniach upraszczających (woda traktowana jest jako ośrodek ciągły, pomiędzy składnikami roztworu nie występują wzajemne oddziaływania, roztwór pozbawiony jest cząstek zawieszonych, nie tworzy się warstwa żelowa przy powierzchni membrany oraz brak jest aktywności biologicznej na granicy faz membrana-roztwór). Na przykładzie programu IMSDesign firmy Hydranautics opisano procedurę postępowania, umożliwiającą symulację działania systemu odwróconej osmozy przy dowolnym układzie modułów membranowych i przy zmiennych parametrach procesowych. Podano zakres niezbędnych parametrów wejściowych, takich jak wymagana wydajność, stopień odzysku i charakterystyka roztworu zasilającego. Podkreślono, że programy komputerowe nie mogą zastąpić badań pilotowych. Podstawową wadą dostępnego oprogramowania jest jego dopasowanie do produktów konkretnej firmy produkującej systemy membranowe oraz nieuwzględnienie w procedurze obliczeniowej zjawiska blokowania membran (fouling).
Analyzed is the problem of whether computer-aided design can be applied to membrane installations. It has been pointed out that the development of predictive models for membrane mass transfer is rather problematic and relies on the mathematical description of the system hydrodynamics, membrane structure and feed water matrix. Only reverse osmosis can be modeled on the basis of the following simplifying assumptions: (1) water is treated as a continuum essentially devoid of the more complex interactions induced by the presence of dispersed particles, (2) the phenomenon of gel layer formation does not appear, and (3) biological activity of the membrane-solution interface can be neglected. Making use of the Hydranautics reverse osmosis software (IMSDesign), a detailed procedure enabling the simulation of a reverse osmosis system under a variable number of membrane modules and process parameters is described. The range of the inputs required (feed water quality, efficiency, conversion) is given. It has also been stressed that computer-aided packages can not be regarded as an alternative to pilot trials. Commercial software packages have the inherent disadvantage that they are applicable only to the supplier's own products. Another major drawback is that the impact of the fouling phenomenon has not been included.
Źródło:
Ochrona Środowiska; 2007, R. 29, nr 2, 2; 21-26
1230-6169
Pojawia się w:
Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies