Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "measurement control" wg kryterium: Temat


Tytuł:
Modernising the control network for determining displacements in hydraulic structures using automatic measurement techniques
Autorzy:
Zaczek-Peplinska, Janina
Saloni, Lech
Powiązania:
https://bibliotekanauki.pl/articles/28411637.pdf
Data publikacji:
2023
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
automatic measurement
control network
dams
engineering geodesy
geodetic displacement measurement
LiDAR
Opis:
Over the last two decades, geodetic surveying has seen significant advancements with terrestrial and unmanned aerial vehicle (UAV) laser scanning, alongside automatic observations being increasingly utilised throughout the construction process. In the context of dam structures, periodic geodetic displacement measurements are a compulsory component of control measurements and safety assessments. In Poland, however, control measurements have largely remained rooted in traditional techniques such as classic linear and angular measurements and precise levelling. These methods are typically carried out within distinct control networks, i.e. without dual-function observation points and targets. Furthermore, network points (pillars, targets) have often not been renewed since their installation several decades ago, and glass discs, used for crown measurements in the baseline method, frequently face damage. Changes in property ownership and modifications in environmental regulations are compounded by these issues, which often impede the proper upkeep of the sight line. The article proposes the adaptation and reconstruction of control networks to incorporate automatic observation techniques, including linear and angular measurements. This approach includes activities aimed at reconstructing and supplementing damaged network structures, modernising the geodetic process of determining structure displacements, and enhancing the accuracy, credibility, and reliability of geodetic displacement measurement results. The article presents the findings of an inventory assessment conducted on the existing control network infrastructure, focusing on the analysis of displacements for structures with diverse constructions and functions - a concrete dam (class I) and a water damming weir with a water intake. Furthermore, it presents practical conclusions regarding the efficient organisation of geodetic control measurements.
Źródło:
Journal of Water and Land Development; 2023, 59; 66--75
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Data Acquisition and Control System Based on Scilab Software Environment
System akwizycji danych i sterowania z wykorzystaniem środowiska programowego Scilab
Autorzy:
Godlewski, Marek
Rogowski, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2134957.pdf
Data publikacji:
2022
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
data acquisition
Scilab
measurement
PID control
akwizycja danych
pomiary
regulacja PID
Opis:
The article presents the data acquisition and control system built using the Scilab software environment which can be an interesting alternative for commercial and very expensive solutions. The system is composed of a National Instruments myDAQ data acquisition device connected to a PC with open-source software for numerical computations Scilab. The proposed system is equipped with Graphical User Interface (GUI) that allows users to process control, visualize and save the acquired data. In addition, the PID control strategy is implemented. Finally, results of laboratory tests verifying the operation of the created system and conclusions are presented.
W artykule zaprezentowano system akwizycji danych i sterowania zbudowany w oparciu o środowisko programowe Scilab, który może stanowić interesującą alternatywę dla komercyjnych i bardzo kosztownych rozwiązań dostępnych na rynku. Układ składa się z karty akwizycji danych myDAQ produkowanej przez National Instruments oraz komputera wyposażonego w oprogramowanie do obliczeń numerycznych Scilab. Stworzono graficzny interfejs użytkownika (GUI), który pozwala na kontrolę procesu, wizualizację i zapis zmierzonych danych. Dodatkowo zrealizowano układ regulacji automatycznej z regulatorem PID. Na koniec pokazano badania laboratoryjne weryfikujące poprawność działania systemu oraz przedstawiono wnioski.
Źródło:
Pomiary Automatyka Robotyka; 2022, 26, 3; 49--55
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnosis of the technical condition of high-tech complexes by probabilistic methods
Autorzy:
Budashko, V.
Sandler, A.
Shevchenko, V.
Powiązania:
https://bibliotekanauki.pl/articles/2086305.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
probabilistic method
diagnosis
high-tech complexes
technical condition
automated measurement and control
diagnostic tool
Opis:
When designing multilevel systems for monitoring the parameters and characteristics of high-tech complexes, it is necessary to effectively control the state of the elements of generating units. Existing control systems for their specification and technical characteristics do not fully meet the monitoring objectives. The capabilities of existing known systems have limitations on the depth of use and compensation for the impact of operational factors. The article proposes and substantiates the feasibility of using the principle of automated measurement and control of load in high-tech complexes based on the probabilistic approach. It is established that the presence of errors in the means of measurement and control leads to specific errors that should be taken when assessing the quality of control, solving management and control tasks. To register the transition of parameters beyond the limit values, a new sensor circuitry based on fiber-optic elements is proposed. The main difference of the proposed diagnostic tool is the invariance to operational destabilizing factors.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2022, 16, 1; 105--111
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kondycja dachu katowickiego Spodka w świetle aktualnych pomiarów sił w dźwigarach linowo-prętowych
Current state of hanging roof above the hall Spodek in Katowice based on the new results of measurement of force in rope girders
Autorzy:
Szydłowski, Rafał
Łabuzek, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/2142038.pdf
Data publikacji:
2022
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
dach wiszący
dźwigar dachowy
konstrukcja wisząca
dźwigar linowy
Katowice
Spodek
hala widowiskowo-sportowa
rozkład sił
pomiar kontrolny
współczynnik bezpieczeństwa
hanging roof
roof girder
hanging structure
line girder
sports and entertainment hall
force distribution
control measurement
safety factor
Opis:
W pracy krótko opisano historię oraz układ konstrukcyjny Hali Widowiskowo-Sportowej Spodek w Katowicach. Nieco więcej uwagi poświęcono konstrukcji dachu oraz technologii jego realizacji. Przedstawiono w szczegółach budowę dachowego dźwigara linowo-prętowego, system naciągu i kontroli sił w linach nośnych. W pracy przedstawiono wyniki pomiarów kontrolnych sił w siedmiu ze 120 dźwigarów dachowych prowadzone od 1971 roku obejmujące również wyniki najnowszych badań przeprowadzonych w 2021 roku. Na podstawie prezentowanych wyników omówiono historię zmiany sił w dźwigarach od oddania obiektu do użytkowania do chwili obecnej oraz poziom bezpieczeństwa konstrukcji dachu w obecnym stanie.
The paper briefly describes the history and construction of the Sports and Entertainment Hall Spodek in Katowice. A little more attention was paid to the roof structure and the technology of its implementation. The structure of the roof rope-rod girder as well as the tensioning and force control system in the lifting tendons are presented in detail. The paper presents the results of control measurements of forces in seven out of 120 roof girders carried out since 1971, including the results of the latest research carried out in 2021. On the basis of the presented results, the history of changes in the forces in the girders from the commissioning of the facility to the present day and the safety level of the roof structure were discussed.
Źródło:
Przegląd Budowlany; 2022, 93, 5-6; 88--92
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Performance of Max-GWMA Control Chart in the Presence of Measurement Errors
Autorzy:
Sharafi, Saeid
Maleki, Mohammad Reza
Salmasnia, Ali
Mansoor, Reihaneh
Powiązania:
https://bibliotekanauki.pl/articles/2201155.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
max-GWMA control chart
average run length
measurement errors
simultaneous monitoring
multiple measurements
Opis:
Recently, simultaneous monitoring of process mean and variability has gained increasing attention. By departing from the accurate measurements assumption, this paper investigates the effect of gauge measurement errors on the performance of the maximum generally weighted moving average (Max-GWMA) chart for simultaneous monitoring of process mean and variability under an additive covariate model. Multiple measurements procedure is employed to compensate for the undesired impact of gauge inaccuracy on detection capability of the MaxGWMA chart. Simulation experiments in terms of average run length (ARL) are conducted to assess the power of the developed chart to detect different out-of-control scenarios. The results confirm that the gauge inaccuracy affects the sensitivity of the Max-GWMA chart. Moreover, the results show that taking multiple measurements per item adequately decreases the adverse effect of measurement errors. Finally, a real-life example is presented to demonstrate how measurement errors increases the false alarm rate of the Max-GWMA chart.
Źródło:
Management and Production Engineering Review; 2022, 13, 4; 26--37
2080-8208
2082-1344
Pojawia się w:
Management and Production Engineering Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Digital Real-Time Rotating Speed Measuring and Fuzzy PID Control Algorithm Design for the Multi-Speed Electronic Let-Off System
Cyfrowy pomiar prędkości obrotowej w czasie rzeczywistym i algorytm rozmytego sterowania PID dla wielobiegowego elektronicznego systemu zwalniania
Autorzy:
Ren, Wen
Wen, Xia
Lai, Sencai
Powiązania:
https://bibliotekanauki.pl/articles/1857697.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
warp knitting machine
digital measurement
real-time measurement
speed measurement
multi-speed system
electronic system
let-off control system
fuzzy control
PI
control algorithm
maszyna dziewiarska
pomiar cyfrowy
pomiar w czasie rzeczywistym
pomiar prędkości
system wielobiegowy
system elektroniczny
system kontroli wypuszczania
sterowanie rozmyte
algorytm sterowania
Opis:
Aiming at the warp knit fabric horizontal strip problem faced by the multi-speed electronic let-off process of warp knitting machines, a design scheme of a fully digital intelligent multi-speed electronic system is proposed. A wide-range digital speed measurement method is proposed which solves the problem that the traditional analog circuit speed measurement method cannot measure the real-time warp beam speed, and also eliminates the problem of the low-speed feedback blind zone. According to the characteristics of the electronic let-off system of warp knitting machines, the hardware structure and software algorithm of the fuzzy PI control system were designed which can adjust the control parameters of the traditional PI controller in real time according to the fuzzy control table, and realise stable multi-speed electronic let-off. The effectiveness of the design method was verified by simulation.
Mając na celu rozwiązanie problemu poziomych pasków dzianiny osnowowej, z którym boryka się wielobiegowy, elektroniczny proces wypuszczania osnowowych maszyn dziewiarskich, zaproponowano schemat projektowy w pełni cyfrowego, inteligentnego, wielobiegowego systemu elektronicznego. Zaproponowano szeroko zakresową cyfrową metodę pomiaru prędkości, która rozwiązuje problem polegający na tym, że tradycyjna metoda pomiaru prędkości obwodu analogowego nie może mierzyć prędkości wiązki odkształcenia w czasie rzeczywistym, a także eliminuje problem martwej strefy sprzężenia zwrotnego przy niskiej prędkości. Zgodnie z charakterystyką elektronicznego systemu wypuszczania maszyn dziewiarskich osnowowych zaprojektowano strukturę sprzętową i algorytm programowy systemu sterowania rozmytego PI, który może dostosowywać parametry sterowania tradycyjnego regulatora PI w czasie rzeczywistym zgodnie z rozmytą tabelą sterowania i zrealizować stabilne elektroniczne wyzwalanie z wieloma prędkościami. Skuteczność metody projektowania zweryfikowano za pomocą symulacji.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 4 (148); 48-55
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kluczowe wskaźniki wyników w kontroli zarządczej przedsiębiorstw
Key performance indicators in the management control of enterprises
Autorzy:
Krzeszowski, Wojciech Dawid
Powiązania:
https://bibliotekanauki.pl/articles/1621765.pdf
Data publikacji:
2021
Wydawca:
Wydawnictwo Uniwersytetu Ekonomicznego we Wrocławiu
Tematy:
kluczowe wskaźniki wyników (KPI)
kluczowe wskaźniki efektywności
kluczowe wskaźniki dokonań
kontrola zarządcza
pomiar wyników
Key Performance Indicators (KPIs)
management control
performance measurement
Opis:
Istotnym elementem kontroli zarządczej są kluczowe wskaźniki wyników (KPI). Cele artykułu to analiza miejsca KPI w kontroli zarządczej i wytycznych ich konstruowania oraz zaprezentowanie przykładowych wskaźników KPI w przedsiębiorstwie X. Osiągnięto je dzięki studium literatury, jej krytycznej analizie, praktycznym doświadczeniom autora oraz egzemplifikacji problematyki KPI w kontroli menedżerskiej. Przy definiowaniu KPI należy uwzględnić zależność między nimi a strategią i strukturą organizacyjną, warto kierować się wzrostem wartości przedsiębiorstwa, należy też powiązać cele firmy z zadaniami pracowników. Wykorzystywanie wskaźników KPI może powodować ogólną koncentrację na jednym określonym zestawie mierników i pominięcie innych mogących mieć znaczenie w realizacji strategii przedsiębiorstwa. Uzupełniono literaturę o ukazanie pomiaru i oceny wyników jako jednego z podstawowych zadań zarządzania przedsiębiorstwem konstytuujących kontrolę zarządczą, wytyczne dotyczące wyznaczania KPI, egzemplifikację problematyki KPI w kontroli zarządczej.
Key Performance Indicators (KPIs) are an important element of management control. The aim of the article is to consider the place of KPIs in management control and to propose guidelines for their construction as well as to exemplify this issue in X organisation. The goal was achieved throught the study of the literature, its critical analysis, the author’s practical experience and the exemplification of KPI issues in managerial control. Defining KPIs: the dependence between them and the strategy and organizational structure should be taken into account, it is worth being guided by the growth of the company’s value, the tasks for employees should be related to the goals of the company. From a practical point of view, it should be remembered that the use of KPIs may also have its “dark sides”, namely it may cause a general focus on one specific set of measures, ignoring others that may also be important in the implementation of the company’s strategy. The literature was supplemented with: showing the measurement and evaluation of company performance as one of the basic tasks of company management, constituting management control, guidelines for defining KPIs, exemplifying the issue of KPIs in management control.
Źródło:
Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu; 2021, 65, 3; 67-82
1899-3192
Pojawia się w:
Prace Naukowe Uniwersytetu Ekonomicznego we Wrocławiu
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transformatorowy piec elektryczny
Transformer electric furnace
Autorzy:
Goryca, Zbigniew
Stachurski, Jerzy
Powiązania:
https://bibliotekanauki.pl/articles/1857487.pdf
Data publikacji:
2021
Wydawca:
Wydawnictwo Druk-Art
Tematy:
piec elektryczny
pomiary
sterowanie
electric furnace
measurement
control
Opis:
W pracy pokazano konstrukcję i pomiary nowoczesnego pieca elektrycznego przeznaczonego do ogrzewania domu jednorodzinnego. Niewielkie wymiary, wysoka sprawność i brak emisji szkodliwych związków chemicznych to główne zalety tego pieca. Dodatkowym atutem jest cicha praca i niezwykle wysoka trwałość pieca związana z brakiem elementów ruchomych, z niezawodnym elektronicznym sterowaniem oraz wymiennikiem ciepła wykonanym ze stali nierdzewnej. Wyniki przeprowadzonych pomiarów pokazują bardzo wysoką sprawność pieca i współczynnik mocy bliski jedynce.
The work shows the construction and measurements of a modern electric furnace for heating a single-family house. Small dimensions, high efficiency and no emission of harmful chemicals are the main advantages of this furnace. An additional advantage is the quiet operation and extremely high durability of the furnace due to the lack of moving parts, with electronic control and a heat exchanger made of stainless steel. The results of the measurements performed show the high efficiency of the furnace and the power factor close to one.
Źródło:
Napędy i Sterowanie; 2021, 23, 3; 62-64
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ temperatury na wyniki badań kontrolnych realizowanych w ramach pomiarów nośności nawierzchni drogowych przy użyciu ugięciomierza TSD
Influence of temperature on results of control tests carried out within the framework of load capacity measurements of road pavements with the use of TSD deflectometer
Autorzy:
Sudyka, Jacek
Harasim, Przemysław
Graczyk, Mirosław
Mechowski, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/2064108.pdf
Data publikacji:
2021
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
ugięciomierz TSD
pomiar
kontrola danych
nośność
nawierzchnia drogowa
temperatura
TSD deflectometer
measurement
data control
load capacity
road pavement
temperature
Opis:
Nośność konstrukcji nawierzchni drogowych jest traktowana jako kluczowy element planowania utrzymania i procesu decyzyjnego na poziomie sieci. Biorąc pod uwagę ugięcia jako bezpośredni wskaźnik nośności nawierzchni, można precyzyjnie oraz skutecznie ocenić zarówno odcinki, jak i całą sieć drogową. Do prawidłowej oceny tego parametru niezbędna jest efektywna metoda pomiarowa oraz zapewnienie możliwie najwyższej jakości danych. Wykonanie pomiaru ugięć na poziomie sieci jest możliwe dzięki zastosowaniu ugięciomierza Traffic Speed Deflectometer (TSD), który jest najnowocześniejszym urządzeniem diagnostycznym na świecie, natomiast utrzymanie jakości danych powinno następować poprzez wdrażanie odpowiednich procedur kontrolno-pomiarowych. W artykule przedstawiono jedną z najczęściej stosowanych metod kontroli własnej pomiarów ugięć z wykorzystaniem ugięciomierza TSD oraz związany z tą metodą problem oceny wyników kontroli w kontekście różnic rejestrowanych wartości temperatur nawierzchni. Stwierdzono, że temperatura nawierzchni powinna być uwzględniona w procesie kontroli zapewnienia jakości pomiarów ugięć tym urządzeniem.
Bearing capacity of the pavement structures is important part of the modern Pavement Management Systems (PMS). Thus bearing capacity has to be considered as key element of maintenance planning as well as decision-making process at the network level. Considering deflection as a direct indication of pavement bearing capacity, it is possible to precisely and effectively assess individual sections or entire road network. Nowadays, such measurements are possible on the network level thanks to Traffic Speed Deflectometer (TSD) which is a state-of-the-art diagnostic device in the world. This paper presents one of the most commonly used methods for self-inspection of deflection measurements using TSD deflectometer and the related problem of evaluating the results of the inspection in the context of differences in recorded pavement temperature values.
Źródło:
Builder; 2021, 25, 11; 35--37
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Conformity of finished forming sieves for paper industry
Autorzy:
Nada, Bojić
Nikolić, Ružica
Manojlović, Goran
Powiązania:
https://bibliotekanauki.pl/articles/111694.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
forming sieve
quality control system
conformity
measurement
zarządzanie jakością
system kontroli jakości
sito formujące
Opis:
The sieves' manufacturers that want to be competitive at the market must have the implemented quality control system. Different methods, based on taking the sample, which is a representative of the total quantity of the forming sieves production, are applied for evaluation of the sieve's conformity. The basic characteristics of this type of the quality function are control, measuring and testing of the forming sieves' properties at the end of the manufacturing process. The objective is to detect and separate the products that deviate from the set criteria, to remain in the factory, then to be repaired if possible or discarded in the opposite case and thus to prevent delivery of the defective sieves to the paper manufacturers.
Źródło:
Production Engineering Archives; 2019, 24; 29-32
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Derivation of Motor Mean Phase Currents in PMSM Drives Operating with Low Switching-to-Fundamental Frequency Ratio
Autorzy:
Jarzebowicz, Leszek
Powiązania:
https://bibliotekanauki.pl/articles/1193701.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
electric drives
high-speed drives
current control
current measurement
Permanent Magnet Synchronous Drives
Digital Signal Processing
Opis:
Pulse width modulation (PWM) of inverter output voltage causes the waveforms of motor phase currents to consist of distinctive ripples. In order to provide suitable feedback for the motor current controllers, the mean value must be extracted from the currents’ waveforms in every PWM cycle. A common solution to derive the mean phase currents is to sample their value at the midpoint of a symmetrical PWM cycle. Using an assumption of linear current changes in steady PWM subintervals, this midpoint sample corresponds to the mean current in the PWM cycle. This way no hardware filtering or high-rate current sampling is required. Nevertheless, the assumption of linear current changes has been recently reported as over simplistic in permanent magnet synchronous motor (PMSM) drives operating with low switching-to-fundamental frequency ratio (SFFR). This, in turn, causes substantial errors in the representation of the mean phase currents by the midpoint sample. This paper proposes a solution for deriving mean phase currents in low SFFR PMSM drives, which does not rely on the linear current change assumption. The method is based on sampling the currents at the start point of a PWM cycle and correcting the sampled value using a model-based formula that reproduces the current waveforms. Effectiveness of the method is verified by simulation for an exemplary setup of high-speed PMSM drive. The results show that the proposed method decreases the error of determining the mean phase currents approximately 10 times when compared to the classical midpoint sampling technique.
Źródło:
Power Electronics and Drives; 2019, 4, 39; 95-102
2451-0262
2543-4292
Pojawia się w:
Power Electronics and Drives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dydaktyczny robot manipulacyjny
Educational manipulation robot
Autorzy:
Sokoliński, Krystian
Jakubiec, Beata
Powiązania:
https://bibliotekanauki.pl/articles/314275.pdf
Data publikacji:
2019
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
manipulator
sterowanie
system pomiarowy
control system
measurement system
Opis:
W artykule przedstawiono realizację projektu małego przegubowego robota dydaktycznego o pięciu stopniach swobody. Opisano elementy części konstrukcji mechanicznej oraz układ sterowania zrealizowany na bazie środowiska LabVIEW i platformy Arduino. Poza sterowaniem oraz prostym programowaniem ruchów manipulatora za pomocą stworzonego interfejsu graficznego wykonano system pomiarowy. Umożliwia on rejestrację oraz wizualizację podstawowych parametrów serwonapędów robota. Opracowany układ pozwala na przystępne zaprezentowanie budowy i działania robota manipulacyjnego w toku realizacji zajęć dydaktycznych na kierunku automatyka i robotyka.
The article presents a project of the small articulated, educational robot with five degrees of freedom. There were described elements of the mechanical part of the structure and the control system based on LabVIEW and the Arduino platform. Apart of steerage and simple programming of manipulators movements, a measuring system was created using the created graphical interface. It allows you to register and visualize the basic parameters of the robot servo drives. The system consists of two basic components: the subsystem of current acquisition and servo voltages, the data processing subsystem. The developed system allows for an easy presentation of the construction and operation of the manipulator in the course of teaching in the field of automation and robotics.
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2019, 20, 1-2; 336-339
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena niepewności punktów charakterystyki z dwu pomiarów kontrolnych
Estimation uncertainties of points of function from two control measurements
Autorzy:
Warsza, Zygmunt Lech
Puchalski, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/267312.pdf
Data publikacji:
2019
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
estymacja
niepewności punktów charakterystyki
punkty kontrolne
dopuszczalny maksymalny błąd pomiaru
pomiary pośrednie
macierz kowariancji
współczynnik korelacji
indirect measurements
permissible maximum measurement error
uncertainty estimation
values of the characteristic
control points
covariance matrix
correlation coefficient
Opis:
Omówiono szacowanie niepewności punktów funkcji opisującej badaną charakterystykę na podstawie wyników pomiarów w dwu punktach kontrolnych. Zastosowano dwie metody I i II. Metodą I estymuje się składowe niepewności typu B na podstawie wartości dopuszczalnych maksymalnych błędów aparatury stosowanej do pomiarów w punktach kontrolowanych tej charakterystyki. Przy stabilnych warunkach pomiaru kilku wartości i pomijalnej niepewności typu A, należy dla wyników przyjąć współczynnik korelacji równy 1. Metodą statystyczną II, na podstawie pomiarów w punktach kontrolnych estymuje się składowe niepewności typu A oraz niepewności złożone dla punktów badanej funkcji i korelację pomiędzy ich wynikami. Korzysta z równania wiążącego macierze kowariancji w pomiarach pośrednich wieloparametrowych wg Suplementu 2 Przewodnika GUM. Wyznaczono też niepewności względne i bezwzględne dla sumy i różnicy wartości dwu punktów i podano przykłady obliczeń. Przy ograniczonej liczbie i czasie wykonywania pomiarów, metodą tą można wyznaczaniu niepewności funkcji opisującej badaną charakterystykę i wykorzystać ja w monitoringu, kontroli i diagnostyce różnych obiektów.
The estimation of the uncertainty of points of the function describing the tested characteristics based on measurement results at two control points is discussed. Two methods were used. By method I, the type B uncertainty component is estimated from the permissible values of the maximum error of the apparatus used for measurements at the controlled points of this tested characteristic. With stable measurement conditions and negligible uncertainty of type A of measurements, a correlation coefficient equal to 1 should be assumed for results of several points measured by the same insturment. The method II is statistical It is based on measurement data at control points and is used for estimation of type A and combined uncertainties of the function values of the points being tested. Correlation coefficient between their results are also estimated. Used for that is the equation binding the covariance matrices in indirect multiparameter measurements according to the Supplement 2 of the GUM Guide. Relative and absolute uncertainties for the sum and difference of values of two points were also determined and few examples of calculations were given. With a limited number and duration of measurements, this method can be used in the monitoring, automatic control and diagnosis of various objects.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2019, 66; 101-108
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of quality air in the engine room on the crew
Autorzy:
Panaitescu, M.
Panaitescu, F. V.
Dumitrescu, M. V.
Panaitescu, V. N.
Powiązania:
https://bibliotekanauki.pl/articles/116017.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
engine room
air quality
main engine
real-time biometric measurement
biometric measurement
health parameters
electronic bracelet
emission control area (ECA)
Opis:
A The novelty of this study consists in the fact that, at the same time as the monitoring and acquisition of data of the air quality (from inside and outside), a monitoring and acquisition of data of the real-time biometric measurements of subjects exposed directly to the needle will be made. Medium by means of a bracelet attached to the subject's arm. This bracelet is designed to perform biometric measurements without creating discomfort to the subjects analyzed in the activities in which they are involved. This measurement is carried out with 9 different sensors for: pulse, oxygen in the blood, air flow (breathing), body temperature, electrocardiogram, galvanic skin response, blood pressure, the patient's position/movement, and the status of muscle (electromyography sensor). The data thus obtained will be focused on a PC and subsequently analyzed. The results of monitoring the health parameters of the subjects analyzed find application in the maritime field, to ships, especially in the engine room, where the air suffers quality transformations. The crew's return to the workplace may decrease due to the degradation of the air quality in the premises.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2019, 13, 2; 409-414
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tool control the concentration of carbon dioxide in the flue gas boilers based on the optical absorption method
Narzędzie kontroli stężenia dwutlenku węgla w spalinach kotłów pracujące na podstawie metody absorpcji optycznej
Autorzy:
Vasilevskyi, Oleksandr
Dudatiev, Ihor
Ovchynnykov, Kostyantyn
Powiązania:
https://bibliotekanauki.pl/articles/408298.pdf
Data publikacji:
2019
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
vehicle control
optical measuring transducer
concentration of carbon dioxide absorption spectrum
uncertainty of measurement
reliability of control
sterowanie pojazdem
optyczny przetwornik pomiarowy
stężenie widma absorpcji dwutlenku węgla
niepewność pomiaru
niezawodność sterowania
Opis:
The methodology for controlling the concentration of carbon dioxide in flue gases from boilers is an optical absorption method with improved metrological characteristics. Studies done in the article, provided the new, scientifically-based theoretical and practical results that are essential for improving the accuracy at the required speed process, control the carbon dioxide concentration in dual gas boilers based on the optical absorption method with compensation effect on the factors optical converter.
Metodologia kontroli stężenia dwutlenku węgla w spalinach kotłów wykorzystuje zjawisko absorpcji optycznej przy ulepszonych charakterystykach metrologicznych. Zaprezentowane w artykule badania dostarczyły nowych wyników, opartych na podstawach naukowych i praktycznych, które są niezbędne do poprawy dokładności przy wymaganej szybkości przebiegu procesu kontroli stężenia dwutlenku węgla w podwójnych kotłach gazowych odbywającej się na podstawie metody absorpcji optycznej z kompensacją czynników w przetworniku optycznym.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2019, 9, 3; 30-34
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies