Temat: magnetic particles - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Overview of recent results from the WEGA stellarator
Autorzy:: Otte, M.
Laqua, H. P.
Chlechowitz, E.
Marsen, S.
Preinhaelter, J.
Stange, T.
Rodatos, A.
Urban, J.
Zhang, D.
Powiązania:: https://bibliotekanauki.pl/articles/147486.pdf
Data publikacji:: 2012
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: magnetic confinement
supra-thermal particles
electron Bernstein waves
Opis:: Repeated magnetic flux surface measurements confirmed the existence of closed and nested flux surfaces, but also revealed the existence of magnetic error fields. The simultaneous application of two radio frequency systems for plasma heating operating at 28 GHz and 2.45 GHz, respectively, allowed to reach otherwise non-accessible plasma regimes in WEGA due to synergetic effects. These regimes are characterized by over-dense plasmas at 0.5 T operation by means of electron Bernstein wave heating and the existence of supra-thermal electrons associated with soft X-ray and gamma-rays. The thermal electron diffusion coefficient was determined in the electron Bernstein wave heated plasma regime. Additionally, results from turbulence studies in low density plasmas in the vicinity of magnetic islands are presented.
Źródło:: Nukleonika; 2012, 57, 2; 171-175
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of shear rate’s variations
Autorzy:: Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/246160.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
rheometer
slide journal bearings
Opis:: The purpose of this study is to determine the effect of changes in the concentration of magnetic particles in ferrooil to change its physical properties, in particular the dynamic viscosity in a constant external magnetic field in terms of changes in shear rate and changes in the intensity of that field. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate -plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. The applied adapter enable to obtain almost homogeneous distribution of magnetic field strength. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for shear rate’s changes from 0 to 1000 1/s as regards changes an external magnetic field intensity 0–700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8% and the tested ferrofluid was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. The paper presents, in the form of graphs, the changes of ferro-oil’s dynamic viscosity as a function of shear rate and concentration of magnetic particles in the aspect of external magnetic field’s intensity changes. The results of research were also subjected to analysis. The obtained characteristics of ferro-oil’s viscosity show clear evidence of non-Newtonian properties of the liquids. There is observed progression of these properties with increasing of magnetic particles concentration. This fact indicates the essential effect of the addition mentioned particles to the change of the ferro-oil’s viscosity characteristics.
Źródło:: Journal of KONES; 2013, 20, 3; 139-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of temperature changes
Autorzy:: Czaban, A.
Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/247080.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
temperature changes
external magnetic field
Opis:: There is presented an effect of the changes of the concentration of magnetic particles included in the ferro-oil on its dynamic viscosity in the presence of external magnetic field in this paper. The study was conducted in the context of temperature’s changes. The authors assume that the concentration of magnetic particles in ferro-oil can significantly affects its basic physical properties as dynamic viscosity, as well as the operational properties of journal sliding bearings ferro-oil’s lubricated. The equally significant as the above mentioned properties may affect the external environmental conditions of operation, especially temperature changes. In this context, an important technique’s issue appears to determine the principles of selection of optimal concentration of above mentioned particles according to the existing environmental conditions of its operation, or the expectations laid against the operation of the devices. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate-to-plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for four selected temperature range of 60º, 70º, 80º and 90ºC as regards changes an external magnetic field intensity 0-700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8%.
Źródło:: Journal of KONES; 2013, 20, 2; 55-60
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Eksperymentalna metoda wyznaczenia współczynników podatności magnetycznej χ ferroolejów o różnym stężeniu cząstek magnetycznych
Experimental method of determining the magnetic susceptibility coefficient χ for ferro-oils with different concentrations of magnetic particles
Autorzy:: Frycz, M.
Anioł, P.
Powiązania:: https://bibliotekanauki.pl/articles/187774.pdf
Data publikacji:: 2014
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferroolej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
Opis:: W niniejszym artykule została zaprezentowana budowa stanowiska badawczego do eksperymentalnego wyznaczenia współczynników podatności magnetycznej χ ferroolejów o różnym stężeniu cząstek magnetycznych oraz została przedstawiona analiza wyników pozyskanych tą metodą. Zewnętrzne, jednorodne, stałe pole magnetyczne uzyskano za pomocą dwóch płytek stałych magnesów umieszczonych równolegle, a zmiany wartości pola zadawano poprzez możliwość kontrolowanego przemieszczania tych magnesów względem siebie. Pomiędzy magnesami umieszczona została próbka badanego oleju, a wartości natężenia pola magnetycznego pomierzono z użyciem miernika indukcji pola magnetycznego Smart Magnetic Sensor SMS 102. Badaniom poddano ferrooleje o wybranych stężeniach cząstek magnetycznych, tj.: 8%, 6%, 4% oraz 2% objętościowo.
This paper presents the construction of an experimental test bench to determine the magnetic susceptibility coefficients χ of ferro oils with different concentrations of magnetic particles, and also the analysis of the results that were obtained by this method. The outer, homogeneous, constant magnetic field was obtained by means of the two plates of permanent magnets arranged in parallel, and changes the field value were carried out by the possibility of controlled movement of the magnets relative to each other. Samples of lubricants were placed between the magnets, and the magnetic field strength was measured by using the magnetic induction SMS Smart Magnetic Sensor 102. Ferro oils with selected concentrations of magnetic particles of 8%, 6%, 4%, and 2% were studied.
Źródło:: Tribologia; 2014, 3; 29-38
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Impact of magnetic particles concentration in ferrooil on its magnetic susceptibility coefficient χ
Autorzy:: Frycz, M.
Anioł, A.
Powiązania:: https://bibliotekanauki.pl/articles/241625.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
magnetic particles concentration
magnetic susceptibility coefficient
Opis:: The purpose of this article is to determine the effect of the concentration of magnetic particles in ferro-oil on the value of its magnetic susceptibility coefficient χ. Determination of the flow and operating parameters of slide journal bearings lubricated with ferro-oils requires, inter alia, designation the first magnetization N and the magnetic induction B vector components, dependent on the magnetic propertis of the lubricant. The fundamental problem lies in the inability to make direct accurate measurement of magnetic induction in the lubricating gap of slide bearing and its solution is to determine it on the analytical and numerical way. A key issue for the accuracy of such solutions is to obtain reasonably accurate values of magnetic susceptibility χ. This article attempts to determine these values and estimate their relationship with the concentration of magnetic particles concentration in ferro-oil being potential lubricant above-mentioned bearings. In this paper, the authors present the characteristic of experimental test benches to determine the coefficients of the magnetic susceptibility. They present method of determining this value from obtained measurement data and analyse the impact of the magnetic particles concentration in ferro-oil on its magnetic susceptibility values. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 2%, 4%, 6% and 8% and the tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant.
Źródło:: Journal of KONES; 2014, 21, 4; 111-117
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Models of viscosity characteristics η=η(b) of ferro-oil with different concentration of magnetic particles in the presence of external magnetic field
Autorzy:: Frycz, M.
Czaban, A.
Powiązania:: https://bibliotekanauki.pl/articles/244776.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
external magnetic field
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles in the presence of an external magnetic field interaction. These characteristics are defined in the context of magnetic induction changes. These rheological tests were performed on a Physica MCR 301 rheometer. It was used a measuring system ‘plate to plate’ type which was armed with magneto-rheological research system MRD 180/1T. The tests were performed for the selected temperature of the medium i.e. 90°C, the shear rate θ changes were carried from 0 to 1000 1/s. Changes of the magnetic field intensity value were ranged from 0 to 500 mT. The selected concentrations of magnetic particles in a ferro-oil were 1%, 2%, 4%, 6% and 8% and the tested ferro-oil was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. Analyses of the results, identify and matching characteristic were calculated using STATISTICA software. It has been proposed three categories of functions mapping the waveforms of the results obtained experimentally: the exponential function, logarithmic with basis of the normal and the polynomial function.
Źródło:: Journal of KONES; 2014, 21, 4; 119-126
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Nanokompozyt poly(ε-kaprolakton)/tlenki żelaza dla zastosowań medycznych
Poly(ε-caprolactone)/iron oxides nanocomposite for medical applications
Autorzy:: Świętek, M.
Gwizdała, J.
Tokarz, W.
Menaszek, E.
Błażewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/285834.pdf
Data publikacji:: 2014
Wydawca:: Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:: magnetyczne nanokompozyty
polimery
magnetyt
cząstki magnetyczne
magnetic nanocomposites
polymer
magnetite
magnetic particles
Opis:: Nanokompozyty polimerowe stanowią szeroką grupę materiałów znajdujących zastosowanie zarówno w wielu gałęziach przemysłu, jak i w medycynie. Fenomen nanokompozytów związany jest z łatwością modyfikacji ich cech materiałowych będących pochodną właściwości zarówno samego polimeru, jak i zastosowanego nanododatku. Pozwala to na projektowanie oraz wytwarzanie materiałów o określonej charakterystyce, adresowanych do konkretnych potrzeb. Celem niniejszej pracy było otrzymanie oraz charakterystyka polimerowych nanokompozytów o właściwościach magnetycznych. Jako osnowę polimerową wykorzystano biozgodny i bioresorbowalny poli(ε-kaprolakton), do którego wprowadzono cząstki magnetytu znajdujące się w dyspersji nanometrycznej. Do przygotowania materiałów zastosowano prostą metodę odlewania filmu/odparowania rozpuszczalnika. W celu zbadania wpływu zawartości nanododatku na właściwości nanokompozytu przygotowano serię materiałów różniących się od siebie ilością wprowadzonych do matrycy polimerowej cząstek magnetycznych (0; 0,5; 1 oraz 2%). Charakterystyka nanokompozytów obejmowała badania własności magnetycznych i powierzchniowych materiałów oraz ocenę ich degradacji oraz biozgodności. Pętle histerezy wprowadzonego do matrycy polimerowej nanododatku oraz otrzymanych nanokompozytów wykazywały przebieg typowy dla multidomenowych materiałów ferrimagnetycznych. Zaobserwowano, że istnieje korelacja pomiędzy wartością namagnesowania nasycenia oraz remanencją, a zawartością cząstek magnetycznych w nanokompozycie. Na podstawie obserwacji mikroskopowych stwierdzono, że część wprowadzonych cząstek magnetycznych ulega aglomeracji, reszta zaś pozostaje w dyspersji nanometrycznej. Wytworzone materiały nie wykazały toksycznego wpływu na komórki (Normal Human Osteoblast), co pozwala sądzić, że otrzymane nanokompozyty mogłyby zostać wykorzystane w medycynie.
Polymer nanocomposites are a wide group of materials which have applications in many branches of industry as well as in medicine. The phenomenon of nanocomposites is associated with simplicity of modification of their features, which are derived from properties of both the polymer matrix and the nanoadditive. This property enables to design and fabricate materials with strictly defined characteristics, addressed to specific needs. The aim of the presented studies was fabrication and characterization of polymer nanocomposites with magnetic properties. As a polymer matrix, a biocompatible and bioresorbable poly(ε-caprolactone) was used. Magnetite powder with nanometer-sized grain fraction was introduced into the polymer matrix as a magnetic nanoadditive. As a fabrication method casting film/solvent evaporation was applied. In order to examine how amount of magnetic nanoadditive influences the properties of nanocomposites, the series of materials with various concentrations of magnetic particles was prepared (0, 0.5, 1 and 2%). Characterization of materials included magnetic and surface properties investigations as well as evaluation of degradability, and biocompatibility of the fabricated materials. Magnetic hysteresis loops of both the nanoadditive itself and the nanocomposite demonstrate curves typical for multi-domain ferromagnetic materials. Existence of the correlation between the values of magnetic saturation and remanence, and the content of magnetic particles has been observed. Microscopic evaluations have shown that small part of magnetic particles has tendency to agglomerate but the rest remains in nanometric dispersion. For the fabricated materials no cytotoxic influence on the cells was observed (Normal Human Osteoblast). This suggests that obtained nanocomposites could find application in medicine.
Źródło:: Engineering of Biomaterials; 2014, 17, 127; 22-32
1429-7248
Pojawia się w:: Engineering of Biomaterials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Effect Of Heat-Treatment On Microstructure And Magnetic Properties Of Nanocrystallized Mn-Zn Ferrite Powders
Wpływ obróbki cieplnej na mikrostrukturę i właściwości magnetyczne nanokrystalicznych proszków ferrytu Mn-Zn
Autorzy:: Lee, W. H.
Hong, C. S.
Chang, S. Y.
Powiązania:: https://bibliotekanauki.pl/articles/351552.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: high energy ball milling
nanosized particles
crystallite size
magnetic properties
frezowanie kulowe
nanocząstki
wielkości krystalitów
właściwości magnetyczne
Opis:: The initial ferrite powders were subjected to high energy ball milling at 300rpm for 3h, and subsequently heat-treated at 573-1273K for 1h. Based on the observation of microstructure and measurement of magnetic properties, the heat-treatment effect was investigated. The size of initial powders was approximately 70μm. After milling, the powders with approximately 230nm in size were obtained, which were composed of the nano-sized particles of approximately 15nm in size. The milled powders became larger to approximately 550nm after heat-treatment at 973K. In addition, the size of particles increased to approximately 120nm with increasing temperature up to 973K. The coercivity of initial powders was almost unchanged after milling, whereas the saturation magnetization increased. As the heat-treatment temperature increased, the saturation magnetization gradually increased and the maximum coercivity was obtained at 773K.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 2B; 1347-1350
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Haemocompatibility and cytotoxic studies of non-metallic composite materials modified with magnetic nano and microparticles
Autorzy:: Szymonowicz, M.
Rybak, Z.
Fraczek-Szczypta, A.
Paluch, D.
Rusak, A.
Nowicka, K.
Blazewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/306490.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: nanokompozyty
cząstki magnetyczne
hemoliza
żywotność komórkowa
koagulacja
nanocomposite
magnetic particles
polysulfone
haemolysis
cell viability
coagulation systems
Opis:: Purpose: Preventing the formation of blood clots on the surface of biomaterials and investigation of the reasons of their formation are the leading topics of the research and development of biomaterials for implants placed into the bloodstream. Biocompatibility and stability of a material in body fluids and direct effect on blood cell counts components are related both to the structure and physico-chemical state of an implant surface. The aim of this study was to determine haemocompatibility and cytotoxicity of polysulfone-based samples containing nano and micro particles of magnetite (Fe3O4). Methods: The polysulfone-based samples modified with nanometric and micrometric magnetite particles were examined. Physicochemical properties of the composites were determined by testing their wettability and surface roughness. The action of haemolytic, activation of coagulation system and cytotoxicity of composites was evaluated. Results: Wettability and roughness of materials were correlated with nanoparticles and microparticles content. In the tests of plasma coagulation system shortening of activated partial thromboplastin time for polysulfone with nano magnetite and with micro magnetite particles was observed in comparison with pure polysulfone. Prothrombine time and thrombine time values as well as fibrinogen concentration were unchanged. Haemolysis values were normal. Morphology and viability of cells were normal. Conclusions: Composites made from polysulfone modified with nanoparticles and microparticles of magnetite cause neither haemolytic nor cytotoxic reaction. These composites evoke plasma endogenous system activation.
Źródło:: Acta of Bioengineering and Biomechanics; 2015, 17, 3; 49-58
1509-409X
2450-6303
Pojawia się w:: Acta of Bioengineering and Biomechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Hydrodynamic and hydromagnetic stability of two superposed elastico – viscous fluids of different permeability with dust in porous medium
Autorzy:: Singh, M.
Mehta, C. B.
Powiązania:: https://bibliotekanauki.pl/articles/266188.pdf
Data publikacji:: 2015
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: Rayleigh-Taylor instability
magnetic field
suspended particles
Walters' B fluid
different permeability and porous medium
pole magnetyczne
materiały porowate
lepkość płynu
Opis:: Rayleigh-Taylor instability of two superposed Walters’ B has elastico-viscous fluids in a uniform magnetic field through a porous medium with different permeability been studied to include the suspended (dust) particles effect. Using normal mode technique a dispersion relation has been derived. The stability analysis has been carried out. The magnetic field stabilizes the unstable configuration for the wave number band K > K* in chich the system is unstable in the absence of the magnetic field. It is also found that for a potential stable arrangement for Walters B’ elastico-viscous fluids of different permeabilities in the presence of suspended particles through a porous medium the system is stable, whereas in the potentially unstable case instability of the system occurs.
Źródło:: International Journal of Applied Mechanics and Engineering; 2015, 20, 2; 407-416
1734-4492
2353-9003
Pojawia się w:: International Journal of Applied Mechanics and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Stability of superposed fluids through magnetic field with suspended particles of different permeability saturated through porous layer
Autorzy:: Singh, M.
Powiązania:: https://bibliotekanauki.pl/articles/265428.pdf
Data publikacji:: 2015
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: porous medium
suspended particles
Rivlin-Ericksen fluid
magnetic field
porowatość
pole magnetyczne
ciecz Rivlina-Ericksena
Opis:: The instability of plane interface between two superposed Rivlin-Ericksen elastico-viscous fluids saturated through a porous medium has been studied to include the suspended (dust) particles effect. Following the linearized stability theory and normal mode analysis the dispersion relation is obtained. For stationary convection, the Rivlin-Ericksen elastico-viscous fluid behaves like Newtonian fluids. It found that for a potentially stable arrangement the Rivlin-Ericksen elastico-viscous fluid of different permeabilities in the presence of suspended particles in a porous medium is stable, whereas in a potentially unstable case instability of the system occurs. In the presence of a magnetic field for a potentially stable arrangement the system is always stable and for the potentially unstable arrangement, the magnetic field succeeds in stabilizing certain wave-number band which was unstable in the absence of the magnetic field.
Źródło:: International Journal of Applied Mechanics and Engineering; 2015, 20, 4; 889-898
1734-4492
2353-9003
Pojawia się w:: International Journal of Applied Mechanics and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Effect of hall currents on thermal instability of dusty couple stress fluid
Autorzy:: Aggarwal, A. K.
Verma, A.
Powiązania:: https://bibliotekanauki.pl/articles/240229.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: couple-stress fluid
dust particles
hall currents
stationary convection
oscillatory modes
magnetic field
ziarna pyłu
konwekcja
pole magnetyczne
Opis:: In this paper, effect of Hall currents on the thermal instability of couple-stress fluid permeated with dust particles has been considered. Following the linearized stability theory and normal mode analysis, the dispersion relation is obtained. For the case of stationary convection, dust particles and Hall currents are found to have destabilizing effect while couple stresses have stabilizing effect on the system. Magnetic field induced by Hall currents has stabilizing/destabilizing effect under certain conditions. It is found that due to the presence of Hall currents (hence magnetic field), oscillatory modes are produced which were non-existent in their absence.
Źródło:: Archives of Thermodynamics; 2016, 37, 3; 3-18
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 1
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243457.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles at context of temperature changes. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver.9.1. There has been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Moreover, the waveform parameters of functions have been determined and their assessed quality has been done also. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters like temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 2; 113-120
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 2
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243733.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine and describe the viscosity characteristics of the ferro-oils at context of temperature changes depend on different concentrations of magnetic particles. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. In Part I of the paper there was determined and described four mathematical-physical models of fittings of the viscosity characteristics: exponential, fourth-degree polynomial and two homographic models – second- and third-degree. In present Part II of the paper above mentioned models have been developed. That has been done their depending on parameter of concentrations of magnetic particles ϕ in ferro-oil. There have been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Pennzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver. 9.1. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters such as temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 3; 127-134
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: The influence of temperature on coefficient of magnetic susceptibility χ of ferro-oils with different concentrations of magnetic particles
Wpływ temperatury na współczynnik podatności magnetycznej χ ferro-olejów o różnym stężeniu cząstek magnetycznych
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/188357.pdf
Data publikacji:: 2016
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
slide journal bearings lubrication
ferrr-olej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
smarowanie poprzecznych łożysk ślizgowych
Opis:: In this paper, the authors presented research concerning the determination of the relation between magnetic susceptibility coefficient χ of ferro-oil and temperature changes. The tests were conducted on the ferro-oil samples of various, chosen magnetic particles concentrations: 1%, 2%, 4%, 6%, and 8%. In accordance with the conclusions resulting from Curie-Weiss equation, the values of magnetic susceptibility χ depend on the physicochemical features of considered material, including the magnitude and amount (concentration) of magnetic particles and physical properties of its environment, i.e. the kind and direction of magnetic field and also on the operating temperature, which is the main subject of conducted tests in this paper. This article presents the structure of the bench used for experimental designation of magnetic susceptibility coefficient in relation to temperature changes of tested ferro-oil. Moreover, the authors demonstrated a method enabling the determination of these values from obtained measurement data, conducted the analysis of obtained results and presented the conclusions.
W niniejszym artykule zostały przedstawione badania dotyczące określenia zależności współczynnika podatności magnetycznej χ ferro-oleju od zmian temperatury. Badaniom poddane zostały próbki ferro-olejów o różnych, wybranych stężeniach cząstek magnetycznych: 1%, 2%, 4%, 6% i 8%. Zgodnie z wnioskami wynikającymi z równania Curie-Weissa wartości podatności magnetycznej χ zależą głównie od własnych cech fizykochemicznych rozpatrywanego materiału, w tym od wielkości i ilości (stężenia) cząstek magnetycznych oraz od fizycznych właściwości jego otoczenia, tj.: rodzaju i kierunku pola magnetycznego, jak również od temperatury pracy, która stanowi zasadniczy temat podjętych badań. W artykule zaprezentowana została budowa stanowiska do eksperymentalnego wyznaczenia współczynnika podatności magnetycznej w kontekście zmian temperatury badanego ferro-oleju. Ponadto zaprezentowana została metoda umożliwiająca wyznaczenie tych wartości z pozyskanych danych pomiarowych oraz dokonano analizy uzyskanych wyników zakończonej wnioskami.
Źródło:: Tribologia; 2016, 269, 5; 21-30
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "magnetic particles" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język