Temat: magnetic particles - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Effect of hall currents on thermal instability of dusty couple stress fluid
Autorzy:: Aggarwal, A. K.
Verma, A.
Powiązania:: https://bibliotekanauki.pl/articles/240229.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: couple-stress fluid
dust particles
hall currents
stationary convection
oscillatory modes
magnetic field
ziarna pyłu
konwekcja
pole magnetyczne
Opis:: In this paper, effect of Hall currents on the thermal instability of couple-stress fluid permeated with dust particles has been considered. Following the linearized stability theory and normal mode analysis, the dispersion relation is obtained. For the case of stationary convection, dust particles and Hall currents are found to have destabilizing effect while couple stresses have stabilizing effect on the system. Magnetic field induced by Hall currents has stabilizing/destabilizing effect under certain conditions. It is found that due to the presence of Hall currents (hence magnetic field), oscillatory modes are produced which were non-existent in their absence.
Źródło:: Archives of Thermodynamics; 2016, 37, 3; 3-18
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Kinetic energy partitions in electron–ion PIC simulations of ABC fields
Autorzy:: Chen, Qiang
Powiązania:: https://bibliotekanauki.pl/articles/2202567.pdf
Data publikacji:: 2023
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: acceleration of particles
magnetic reconnection
relativisitc processes
simulations
Opis:: We explore the kinetic energy partitions between electrons and ions in the 2-D magnetostatic equilibria called Arnold–Beltrami–Childress (ABC) fields, using particle-in-cell (PIC) numerical simulations. We cover a wider range of ion–electron temperature combinations and get different results compared to previous studies of the Harris-layer-type magnetic reconnection simulations. We find that the initial ion–electron enthalpy ratio is an important indicator. The particle species that dominates the total enthalpy will also dominate the kinetic energy gains and the momentum distribution peaks, but the other species have higher nonthermal energy fractions because both species show similar maximum energies.
Źródło:: Nukleonika; 2023, 68, 1; 25--28
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of temperature changes
Autorzy:: Czaban, A.
Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/247080.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
temperature changes
external magnetic field
Opis:: There is presented an effect of the changes of the concentration of magnetic particles included in the ferro-oil on its dynamic viscosity in the presence of external magnetic field in this paper. The study was conducted in the context of temperature’s changes. The authors assume that the concentration of magnetic particles in ferro-oil can significantly affects its basic physical properties as dynamic viscosity, as well as the operational properties of journal sliding bearings ferro-oil’s lubricated. The equally significant as the above mentioned properties may affect the external environmental conditions of operation, especially temperature changes. In this context, an important technique’s issue appears to determine the principles of selection of optimal concentration of above mentioned particles according to the existing environmental conditions of its operation, or the expectations laid against the operation of the devices. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate-to-plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for four selected temperature range of 60º, 70º, 80º and 90ºC as regards changes an external magnetic field intensity 0-700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8%.
Źródło:: Journal of KONES; 2013, 20, 2; 55-60
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Application of magnetic separation and reverse anionic flotation to concentrate fine particles of iron ore with high sulfur content
Autorzy:: Dehghani, Fahimeh
Khosravi, Rasoul
Pazoki, Amir
Kebe, Moustapha
Jahanian, Reza
Siavoshi, Hossein
Ghosh, Tathagata
Powiązania:: https://bibliotekanauki.pl/articles/2146898.pdf
Data publikacji:: 2022
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: iron ore
fine particles
magnetic separation
reverse anionic flotation
sulfur
Opis:: The sulfur content in iron ore causes technical problems in the process of sintering iron ore in steel and alloys, and environmental problems in discharging the tailing. The major challenge in the iron ore processing plant is handling the finer particles. The key objectives of this research included the concentration of Band Narges Mine iron ore (< 150 μm) as well as the reduction of the sulfur content to achieve a marketable product. First, the mineralogical characterization of iron ore was established, which showed that Fe3O4, SiO2, and CaO were the predominant minerals in the ore body. Moreover, magnetite particles with a size of < 150 μm were mainly locked into the associated gangue mineral. Second, metallurgical experiments were conducted, including magnetic separation and froth flotation. To increase the iron grade and recovery and decrease the sulfur content, two separate process flowsheets were tested, three steps of magnetic separation with a magnetic field strength of 2000 G were used in the first process flowsheets, followed by regrinding to < 74 μm and application of a three-stage reverse flotation. The overall iron grade and recovery were 76.38% and 67.9%, respectively, from this flowsheet. A five-stage successive reverse flotation followed by three stages of magnetic separation at 1000 G was carried out in the second flowsheet. The final recovery and grade of iron for this flowsheet were 77.15% and 64.3%, respectively. The ultimate content of sulfur was estimated at 0.74%.
Źródło:: Physicochemical Problems of Mineral Processing; 2022, 58, 3; art. no. 145420
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of shear rate’s variations
Autorzy:: Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/246160.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
rheometer
slide journal bearings
Opis:: The purpose of this study is to determine the effect of changes in the concentration of magnetic particles in ferrooil to change its physical properties, in particular the dynamic viscosity in a constant external magnetic field in terms of changes in shear rate and changes in the intensity of that field. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate -plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. The applied adapter enable to obtain almost homogeneous distribution of magnetic field strength. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for shear rate’s changes from 0 to 1000 1/s as regards changes an external magnetic field intensity 0–700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8% and the tested ferrofluid was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. The paper presents, in the form of graphs, the changes of ferro-oil’s dynamic viscosity as a function of shear rate and concentration of magnetic particles in the aspect of external magnetic field’s intensity changes. The results of research were also subjected to analysis. The obtained characteristics of ferro-oil’s viscosity show clear evidence of non-Newtonian properties of the liquids. There is observed progression of these properties with increasing of magnetic particles concentration. This fact indicates the essential effect of the addition mentioned particles to the change of the ferro-oil’s viscosity characteristics.
Źródło:: Journal of KONES; 2013, 20, 3; 139-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Eksperymentalna metoda wyznaczenia współczynników podatności magnetycznej χ ferroolejów o różnym stężeniu cząstek magnetycznych
Experimental method of determining the magnetic susceptibility coefficient χ for ferro-oils with different concentrations of magnetic particles
Autorzy:: Frycz, M.
Anioł, P.
Powiązania:: https://bibliotekanauki.pl/articles/187774.pdf
Data publikacji:: 2014
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferroolej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
Opis:: W niniejszym artykule została zaprezentowana budowa stanowiska badawczego do eksperymentalnego wyznaczenia współczynników podatności magnetycznej χ ferroolejów o różnym stężeniu cząstek magnetycznych oraz została przedstawiona analiza wyników pozyskanych tą metodą. Zewnętrzne, jednorodne, stałe pole magnetyczne uzyskano za pomocą dwóch płytek stałych magnesów umieszczonych równolegle, a zmiany wartości pola zadawano poprzez możliwość kontrolowanego przemieszczania tych magnesów względem siebie. Pomiędzy magnesami umieszczona została próbka badanego oleju, a wartości natężenia pola magnetycznego pomierzono z użyciem miernika indukcji pola magnetycznego Smart Magnetic Sensor SMS 102. Badaniom poddano ferrooleje o wybranych stężeniach cząstek magnetycznych, tj.: 8%, 6%, 4% oraz 2% objętościowo.
This paper presents the construction of an experimental test bench to determine the magnetic susceptibility coefficients χ of ferro oils with different concentrations of magnetic particles, and also the analysis of the results that were obtained by this method. The outer, homogeneous, constant magnetic field was obtained by means of the two plates of permanent magnets arranged in parallel, and changes the field value were carried out by the possibility of controlled movement of the magnets relative to each other. Samples of lubricants were placed between the magnets, and the magnetic field strength was measured by using the magnetic induction SMS Smart Magnetic Sensor 102. Ferro oils with selected concentrations of magnetic particles of 8%, 6%, 4%, and 2% were studied.
Źródło:: Tribologia; 2014, 3; 29-38
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Impact of magnetic particles concentration in ferrooil on its magnetic susceptibility coefficient χ
Autorzy:: Frycz, M.
Anioł, A.
Powiązania:: https://bibliotekanauki.pl/articles/241625.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
magnetic particles concentration
magnetic susceptibility coefficient
Opis:: The purpose of this article is to determine the effect of the concentration of magnetic particles in ferro-oil on the value of its magnetic susceptibility coefficient χ. Determination of the flow and operating parameters of slide journal bearings lubricated with ferro-oils requires, inter alia, designation the first magnetization N and the magnetic induction B vector components, dependent on the magnetic propertis of the lubricant. The fundamental problem lies in the inability to make direct accurate measurement of magnetic induction in the lubricating gap of slide bearing and its solution is to determine it on the analytical and numerical way. A key issue for the accuracy of such solutions is to obtain reasonably accurate values of magnetic susceptibility χ. This article attempts to determine these values and estimate their relationship with the concentration of magnetic particles concentration in ferro-oil being potential lubricant above-mentioned bearings. In this paper, the authors present the characteristic of experimental test benches to determine the coefficients of the magnetic susceptibility. They present method of determining this value from obtained measurement data and analyse the impact of the magnetic particles concentration in ferro-oil on its magnetic susceptibility values. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 2%, 4%, 6% and 8% and the tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant.
Źródło:: Journal of KONES; 2014, 21, 4; 111-117
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Influence of magnetic particles concentration in ferro-oil on values of friction force and coefficient of friction of slide journal bearing
Autorzy:: Frycz, M.
Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/243124.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
friction force
friction coefficient
lepkość dynamiczna
stężenie cząstek magnetycznych
siła tarcia
współczynnik tarcia
Opis:: This article has been focused on the analysis of changes in friction force as well as coefficient of friction of slide journal bearing in terms of the concentration of magnetic particles in the lubricating ferro-oil. There has been present an analytical and numerical calculation model based on experimentally determined physical quantities describing the dependence of ferro-oil’s viscosity on fundamental parameters such as temperature, pressure or external magnetic field in the paper. Numerical calculations of the dimensionless friction force as well as the dimensionless friction coefficient were performed by solving the Reynold’s type equation using the finite difference method using Mathcad 15 and own calculation procedures. The obtained results has been presented in the form of a series of graphs that take into account: the influence of external magnetic field, corrections related to the influence of pressure changes, corrections related to the influence of temperature changes and finally corrections related to non-Newtonian ferro-oil properties. An analysis of the obtained characteristics has been made so the observations and conclusions were drawn regarding optimum magnetic particle content in the ferro-oil lubricating the sliding journal bearing.
Źródło:: Journal of KONES; 2017, 24, 1; 143-150
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Models of viscosity characteristics η=η(b) of ferro-oil with different concentration of magnetic particles in the presence of external magnetic field
Autorzy:: Frycz, M.
Czaban, A.
Powiązania:: https://bibliotekanauki.pl/articles/244776.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
external magnetic field
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles in the presence of an external magnetic field interaction. These characteristics are defined in the context of magnetic induction changes. These rheological tests were performed on a Physica MCR 301 rheometer. It was used a measuring system ‘plate to plate’ type which was armed with magneto-rheological research system MRD 180/1T. The tests were performed for the selected temperature of the medium i.e. 90°C, the shear rate θ changes were carried from 0 to 1000 1/s. Changes of the magnetic field intensity value were ranged from 0 to 500 mT. The selected concentrations of magnetic particles in a ferro-oil were 1%, 2%, 4%, 6% and 8% and the tested ferro-oil was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. Analyses of the results, identify and matching characteristic were calculated using STATISTICA software. It has been proposed three categories of functions mapping the waveforms of the results obtained experimentally: the exponential function, logarithmic with basis of the normal and the polynomial function.
Źródło:: Journal of KONES; 2014, 21, 4; 119-126
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Researching and modeling of the dynamic viscosity of the ferro-oils with the different concentrations of magnetic particles in the aspect of pressure changes
Badania i modelowanie lepkości dynamicznej ferro-olejów o różnym stężeniu cząstek magnetycznych w aspekcie zmian ciśnienia
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/190936.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic particles concentration
pressure changes
models of viscosity
ferro-olej
stężenie cząstek magnetycznych
zmiany ciśnienia
modele lepkości
Opis:: In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The research was conducted on the Thermo Scientific Haake Mars III rheometer in the configuration with a pressure chamber. The applied configuration allowed the author to conduct research on the change of viscosity for the selected pressure values p in range from 0 to 100 bars. The research was conducted for three selected temperature values, including t = 30°C, 60°C, and 90°C, as well as selected shear rates of 200 and 600s-1. The chosen concentration values of the magnetic particles were nCS = 1%, 2%, 4%, 6%, and 8%. The viscous characteristics gathered as a result of the research have been analysed with the aim of identifying the nature of the correlations and to create mathematical-physical models of changes in the dynamic viscosity of the ferrooils due to the change in pressure in terms of concentrations of the magnetic particles. Analysis, identification, and adaptation of the characteristics were conducted using the StatSoft STATISTICA ver. 9 software. Selected mathematical adaptations of the acquired results were submitted through the enhanced analysis. In addition, parameters of the course of functions were designated and their qualitative assessments were made.
W artykule zaprezentowane zostały wyniki eksperymentalnych badań wyznaczania lepkości dynamicznej ferro-olejów o różnym stężeniu cząstek magnetycznych w aspekcie zmian ciśnienia. Badania zostały przeprowadzone na reometrze Thermo Scientific Haake Mars III w konfiguracji z tzw. komorą ciśnieniową. Zastosowana konfiguracja pozwalała na prowadzenie badań zmian lepkości dla wybranych wartości ciśnienia p z zakresu od 0 do 100 bar. Badania przeprowadzono dla trzech wybranych wartości temperatur dla t = 30°C, 60°C oraz 90°C i wybranych prędkości ścinania: 200 oraz 600 s-1. Przyjęte wartości stężenia cząstek magnetycznych wynosiły nCS = 1%, 2%, 4%, 6% i 8%. Uzyskane w wyniku badań charakterystyki lepkościowe poddane zostały analizie zmierzającej do identyfikacji charakteru zależności i wykreowanie matematyczno-fizycznych modeli zmian lepkości dynamicznej ferro-olejów od zmian ciśnienia w aspekcie stężenia cząstek magnetycznych. Analizy, identyfikacji i dopasowania charakterystyk dokonano przy wykorzystaniu oprogramowania StatSoft STATISTICA wer. 9. Pogłębionej analizie poddano wyselekcjonowane dopasowania matematyczne uzyskanych wyników doświadczalnych. Wyznaczono ponadto parametry przebiegu funkcji i dokonano ich oceny jakościowej.
Źródło:: Tribologia; 2017, 272, 2; 39-48
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 1
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243457.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles at context of temperature changes. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver.9.1. There has been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Moreover, the waveform parameters of functions have been determined and their assessed quality has been done also. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters like temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 2; 113-120
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 2
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243733.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine and describe the viscosity characteristics of the ferro-oils at context of temperature changes depend on different concentrations of magnetic particles. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. In Part I of the paper there was determined and described four mathematical-physical models of fittings of the viscosity characteristics: exponential, fourth-degree polynomial and two homographic models – second- and third-degree. In present Part II of the paper above mentioned models have been developed. That has been done their depending on parameter of concentrations of magnetic particles ϕ in ferro-oil. There have been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Pennzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver. 9.1. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters such as temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 3; 127-134
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: The influence of temperature on coefficient of magnetic susceptibility χ of ferro-oils with different concentrations of magnetic particles
Wpływ temperatury na współczynnik podatności magnetycznej χ ferro-olejów o różnym stężeniu cząstek magnetycznych
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/188357.pdf
Data publikacji:: 2016
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
slide journal bearings lubrication
ferrr-olej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
smarowanie poprzecznych łożysk ślizgowych
Opis:: In this paper, the authors presented research concerning the determination of the relation between magnetic susceptibility coefficient χ of ferro-oil and temperature changes. The tests were conducted on the ferro-oil samples of various, chosen magnetic particles concentrations: 1%, 2%, 4%, 6%, and 8%. In accordance with the conclusions resulting from Curie-Weiss equation, the values of magnetic susceptibility χ depend on the physicochemical features of considered material, including the magnitude and amount (concentration) of magnetic particles and physical properties of its environment, i.e. the kind and direction of magnetic field and also on the operating temperature, which is the main subject of conducted tests in this paper. This article presents the structure of the bench used for experimental designation of magnetic susceptibility coefficient in relation to temperature changes of tested ferro-oil. Moreover, the authors demonstrated a method enabling the determination of these values from obtained measurement data, conducted the analysis of obtained results and presented the conclusions.
W niniejszym artykule zostały przedstawione badania dotyczące określenia zależności współczynnika podatności magnetycznej χ ferro-oleju od zmian temperatury. Badaniom poddane zostały próbki ferro-olejów o różnych, wybranych stężeniach cząstek magnetycznych: 1%, 2%, 4%, 6% i 8%. Zgodnie z wnioskami wynikającymi z równania Curie-Weissa wartości podatności magnetycznej χ zależą głównie od własnych cech fizykochemicznych rozpatrywanego materiału, w tym od wielkości i ilości (stężenia) cząstek magnetycznych oraz od fizycznych właściwości jego otoczenia, tj.: rodzaju i kierunku pola magnetycznego, jak również od temperatury pracy, która stanowi zasadniczy temat podjętych badań. W artykule zaprezentowana została budowa stanowiska do eksperymentalnego wyznaczenia współczynnika podatności magnetycznej w kontekście zmian temperatury badanego ferro-oleju. Ponadto zaprezentowana została metoda umożliwiająca wyznaczenie tych wartości z pozyskanych danych pomiarowych oraz dokonano analizy uzyskanych wyników zakończonej wnioskami.
Źródło:: Tribologia; 2016, 269, 5; 21-30
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Implantation of superabsorbent polymer by magnetic iron oxide particles
Autorzy:: Grzesiak, Maciej
Szajnecki, Łukasz
Powiązania:: https://bibliotekanauki.pl/articles/2079886.pdf
Data publikacji:: 2019
Wydawca:: Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:: superabsorbents
hydrogels
magnetic particles
swelling properties
Opis:: The aim of this research was to optimise methods of magnetic particles of iron oxides implantation into superabsorbent polymer based on partially neutralized acrylic acid (SAc/AAc) crosslinked with ethylene glycol dimethacrylate (EGDMA). The structure of the obtained materials was confirmed by infrared spectroscopic analysis (FT-IR/ATR). The quality of implantation process was evaluated on the basis of microscopy images. Swelling properties of the obtained implanted materials were also determined.
Źródło:: Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia; 2019, 74, 2; 101-113
2083-358X
Pojawia się w:: Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Materiał magnetyczny w części nierozpuszczalnej soli wysadu Góra (otwór G-40) – najnowsze wyniki i ich odniesienie do wcześniejszych prac
Magnetic particles in the insoluble material from Góra Salt Dome (G-40) – the latest results and their reference to previous works
Autorzy:: Jaworska, Joanna
Borowczyk, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/2192071.pdf
Data publikacji:: 2018
Wydawca:: Polskie Stowarzyszenie Górnictwa Solnego
Tematy:: sole cechsztyńskie
rezyduum
składnik magnetyczny
antropogeniczny czy pozaziemski materiał
Zechstein salt
residuum
magnetic particles
anthropogenic or extraterrestrial material
Opis:: W celu zbadania pochodzenia materiału magnetycznego w próbkach soli cechsztyńskich przeanalizowano dostępny, siedmiometrowy fragment rdzenia G-40, z głębokości 510- 528 m p.p.t., pozyskanego z wysadu Góra (ryc. 1). Szczególną uwagę poświęcono wykluczeniu możliwości udziału materiału pochodzenia antropogenicznego wśród materii magnetycznej stanowiącej składniki rezyduum z rozpuszczenia soli. Łącznie rozpuszczono 96,874 kg soli cechsztyńskiej uzyskując po osuszeniu 1069,8 g suchej pozostałości. Średnia zawartość rezyduum dla przebadanych fragmentów rdzenia wyniosła 1,12%. Wśród materiału magnetycznego zebrano jedynie nieregularne, blaszkowate ziarna o rozmiarach od 150 do ok. 400 μm (ryc. 2). Przebadane ziarna magnetyczne zawierają 52,7-84,2 % tlenku żelaza Fe2O3, ok. 0,3-3,04% tlenku glinu, a także krzemionkę, sód, wapń lub mangan. W 2 próbkach odnotowano obecność cynku oraz w pojedynczych molibdenu, wolframu, a także fosforu. Ponieważ każdy etap pracy przygotowawczej, a także późniejszej, laboratoryjnej odbywał się ze szczególną dbałością o zachowanie sterylności próbek, należy wykluczyć możliwość udziału – przedostania się do analizowanego materiału składników pochodzenia antropogenicznego. Zatem pochodzenie kosmiczne materiału magnetycznego o kształtach nieregularnych jest bardzo prawdopodobne. W badanym materiale nie stwierdzono obecności żadnej formy kulistej – sferuli. Tym samym obecność form kulistych – sferulek w większych ilościach (zob. praca L. Mazura 1973, tab. 1), może budzić wątpliwości.
Near 97 kg of salt samples from borehole G-40 from Góra Salt Dome (fig. 1) was obtained and dissolved. There was analysed insoluble material, which was characterized by high magnetisation. All analyzed salt samples come from 2-nd Zechstein (Late Permian) cyclothem Stassfurt, from deep 510-528 m b.g.l. The collected material (15 grains) are representing only one type form - irregular particles, plates form of size 150 to over 400 μm (see fig. 2). There was not noted any regular, spherical form – spherules. This material was analysed using the SEM - EDS. The chemical composition of particles ranges from 52,7 to 84,2 % iron oxide and 0,3-3,04 % aluminium oxide. In none of the samples was noted Ni. Irregular particles have rough surface and sharp edges. The origin of this material can be extraterrestrial. Highly probably that this particles are cosmic dust, micrometeorites or small shattered fragments of bigger meteorite body. The possibility of participation of anthropogenic material as accidental contamination of analyzed samples has been rather excluded.
Źródło:: Przegląd Solny; 2018, 14; 70--76
2300-9349
Pojawia się w:: Przegląd Solny
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "magnetic particles" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język