Temat: magnetic particles - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Implantation of superabsorbent polymer by magnetic iron oxide particles
Autorzy:: Grzesiak, Maciej
Szajnecki, Łukasz
Powiązania:: https://bibliotekanauki.pl/articles/2079886.pdf
Data publikacji:: 2019
Wydawca:: Uniwersytet Marii Curie-Skłodowskiej. Wydawnictwo Uniwersytetu Marii Curie-Skłodowskiej
Tematy:: superabsorbents
hydrogels
magnetic particles
swelling properties
Opis:: The aim of this research was to optimise methods of magnetic particles of iron oxides implantation into superabsorbent polymer based on partially neutralized acrylic acid (SAc/AAc) crosslinked with ethylene glycol dimethacrylate (EGDMA). The structure of the obtained materials was confirmed by infrared spectroscopic analysis (FT-IR/ATR). The quality of implantation process was evaluated on the basis of microscopy images. Swelling properties of the obtained implanted materials were also determined.
Źródło:: Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia; 2019, 74, 2; 101-113
2083-358X
Pojawia się w:: Annales Universitatis Mariae Curie-Skłodowska, sectio AA – Chemia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Impact of magnetic particles concentration in ferrooil on its magnetic susceptibility coefficient χ
Autorzy:: Frycz, M.
Anioł, A.
Powiązania:: https://bibliotekanauki.pl/articles/241625.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
magnetic particles concentration
magnetic susceptibility coefficient
Opis:: The purpose of this article is to determine the effect of the concentration of magnetic particles in ferro-oil on the value of its magnetic susceptibility coefficient χ. Determination of the flow and operating parameters of slide journal bearings lubricated with ferro-oils requires, inter alia, designation the first magnetization N and the magnetic induction B vector components, dependent on the magnetic propertis of the lubricant. The fundamental problem lies in the inability to make direct accurate measurement of magnetic induction in the lubricating gap of slide bearing and its solution is to determine it on the analytical and numerical way. A key issue for the accuracy of such solutions is to obtain reasonably accurate values of magnetic susceptibility χ. This article attempts to determine these values and estimate their relationship with the concentration of magnetic particles concentration in ferro-oil being potential lubricant above-mentioned bearings. In this paper, the authors present the characteristic of experimental test benches to determine the coefficients of the magnetic susceptibility. They present method of determining this value from obtained measurement data and analyse the impact of the magnetic particles concentration in ferro-oil on its magnetic susceptibility values. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 2%, 4%, 6% and 8% and the tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant.
Źródło:: Journal of KONES; 2014, 21, 4; 111-117
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 2
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243733.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine and describe the viscosity characteristics of the ferro-oils at context of temperature changes depend on different concentrations of magnetic particles. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. In Part I of the paper there was determined and described four mathematical-physical models of fittings of the viscosity characteristics: exponential, fourth-degree polynomial and two homographic models – second- and third-degree. In present Part II of the paper above mentioned models have been developed. That has been done their depending on parameter of concentrations of magnetic particles ϕ in ferro-oil. There have been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Pennzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver. 9.1. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters such as temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 3; 127-134
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: The ferro-oils viscosity depended simultaneously on the temperature and magnetic oil particles concentration η = η(t,ϕ). Part 1
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/243457.pdf
Data publikacji:: 2016
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles at context of temperature changes. These characteristics were determined for the following test conditions: atmospheric pressure, constant shear rate and absent of an external magnetic field. Tests were performed for selected concentrations of magnetic particles in ferro-oil ranging: 1%, 2%, 4%, 6% and 8%. Tested ferro-oil was product from Unterensingen FerroTec Company (Germany) which is a mixture of colloidal mineral engine oil LongLife Gold Penzzoil class SAE 15W-40 with addition of Fe3O4 magnetic particles and a surfactant. Analysis of the results, identifying and fitting of characteristics has been made by means of software StatSoft STATISTICA ver.9.1. There has been also undertaken comparison of the accuracy of estimation of reached results by selected mathematical models as well as these results have been rated according to their compliance with theoretical assumptions. Moreover, the waveform parameters of functions have been determined and their assessed quality has been done also. The obtained characteristics going to be used by author in his future work to build mathematical models of viscosity changes of ferro-oils in the aspect of changes of parameters like temperature, pressure, shear rate and the value of the external magnetic field. The determined parameters of physical properties will be used in analytical and numerical studies of flow and operating parameters of slide journal bearings lubricated with ferro-oils.
Źródło:: Journal of KONES; 2016, 23, 2; 113-120
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Vorticity transport analysis in magnetic viscoelastic fluid
Autorzy:: Kumar, P.
Mohan, H.
Hoshoudy, G.
Powiązania:: https://bibliotekanauki.pl/articles/281534.pdf
Data publikacji:: 2016
Wydawca:: Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:: Rivlin-Ericksen viscoelastic fluid
suspended magnetic particles
vorticity
Opis:: Results of investigation on the transport of vorticity in Rivlin-Ericksen viscoelastic fluid in the presence of suspended magnetic particles is presented here. Equations governing the transport of vorticity in Rivlin-Ericksen viscoelastic fluid in the presence of suspended magnetic particles are obtained from the equations of magnetic fluid flow. From these equations it follows that the transport of solid vorticity is coupled with the transport of fluid vorticity. Further, we find that because of thermokinetic process, fluid vorticity may exist in the absence of solid vorticity, but when fluid vorticity is zero, then solid vorticity is necessarily zero. A two-dimensional case is also studied and found that the fluid vorticity is indirectly influenced by the temperature and the magnetic field gradient.
Źródło:: Journal of Theoretical and Applied Mechanics; 2016, 54, 1; 127-133
1429-2955
Pojawia się w:: Journal of Theoretical and Applied Mechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Models of viscosity characteristics η=η(b) of ferro-oil with different concentration of magnetic particles in the presence of external magnetic field
Autorzy:: Frycz, M.
Czaban, A.
Powiązania:: https://bibliotekanauki.pl/articles/244776.pdf
Data publikacji:: 2014
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
external magnetic field
Opis:: The purpose of this article is to determine, identify and describe the viscosity characteristics of the ferro-oil with different concentrations of magnetic particles in the presence of an external magnetic field interaction. These characteristics are defined in the context of magnetic induction changes. These rheological tests were performed on a Physica MCR 301 rheometer. It was used a measuring system ‘plate to plate’ type which was armed with magneto-rheological research system MRD 180/1T. The tests were performed for the selected temperature of the medium i.e. 90°C, the shear rate θ changes were carried from 0 to 1000 1/s. Changes of the magnetic field intensity value were ranged from 0 to 500 mT. The selected concentrations of magnetic particles in a ferro-oil were 1%, 2%, 4%, 6% and 8% and the tested ferro-oil was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. Analyses of the results, identify and matching characteristic were calculated using STATISTICA software. It has been proposed three categories of functions mapping the waveforms of the results obtained experimentally: the exponential function, logarithmic with basis of the normal and the polynomial function.
Źródło:: Journal of KONES; 2014, 21, 4; 119-126
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Fully coupled multi-physics modeling of the multi-type magnetic particles dynamic behavior in low intensity magnetic separator
Autorzy:: Wang, Feiwang
Zhao, Hongming
Dai, Huixin
Du, Wuxing
Powiązania:: https://bibliotekanauki.pl/articles/109730.pdf
Data publikacji:: 2019
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: multi-physics model
low-intensity magnetic separator
magnetic particles
dynamic behaviour
Opis:: Studying the dynamic behavior of magnetic particle suspensions in the low intensity magnetic separator has important implications for various mineral beneficiation processes. A new approach for fully coupled multi-physics modeling of the dynamic behavior of multi-type magnetic particles (MTMPs) is developed in the study. In this model, the particle tracing module is employed to identify and determine individual particle trajectories in the fluid and magnetic field, which are modelled through the COMSOL Multiphysics. The results show that the different arrangements of the permanent magnet assembly and the volume percentage of interlocked particles affect the dynamic behavior of MTMPs and the efficiency of the separation. The model is compared with experiments and the particle capture theory and the correctness of the solution obtained from COMSOL is demonstrated. The model gives new possibilities to control, optimise, and develop the process of LIMS.
Źródło:: Physicochemical Problems of Mineral Processing; 2019, 55, 1; 163-172
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Nanokompozyt poly(ε-kaprolakton)/tlenki żelaza dla zastosowań medycznych
Poly(ε-caprolactone)/iron oxides nanocomposite for medical applications
Autorzy:: Świętek, M.
Gwizdała, J.
Tokarz, W.
Menaszek, E.
Błażewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/285834.pdf
Data publikacji:: 2014
Wydawca:: Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Polskie Towarzystwo Biominerałów
Tematy:: magnetyczne nanokompozyty
polimery
magnetyt
cząstki magnetyczne
magnetic nanocomposites
polymer
magnetite
magnetic particles
Opis:: Nanokompozyty polimerowe stanowią szeroką grupę materiałów znajdujących zastosowanie zarówno w wielu gałęziach przemysłu, jak i w medycynie. Fenomen nanokompozytów związany jest z łatwością modyfikacji ich cech materiałowych będących pochodną właściwości zarówno samego polimeru, jak i zastosowanego nanododatku. Pozwala to na projektowanie oraz wytwarzanie materiałów o określonej charakterystyce, adresowanych do konkretnych potrzeb. Celem niniejszej pracy było otrzymanie oraz charakterystyka polimerowych nanokompozytów o właściwościach magnetycznych. Jako osnowę polimerową wykorzystano biozgodny i bioresorbowalny poli(ε-kaprolakton), do którego wprowadzono cząstki magnetytu znajdujące się w dyspersji nanometrycznej. Do przygotowania materiałów zastosowano prostą metodę odlewania filmu/odparowania rozpuszczalnika. W celu zbadania wpływu zawartości nanododatku na właściwości nanokompozytu przygotowano serię materiałów różniących się od siebie ilością wprowadzonych do matrycy polimerowej cząstek magnetycznych (0; 0,5; 1 oraz 2%). Charakterystyka nanokompozytów obejmowała badania własności magnetycznych i powierzchniowych materiałów oraz ocenę ich degradacji oraz biozgodności. Pętle histerezy wprowadzonego do matrycy polimerowej nanododatku oraz otrzymanych nanokompozytów wykazywały przebieg typowy dla multidomenowych materiałów ferrimagnetycznych. Zaobserwowano, że istnieje korelacja pomiędzy wartością namagnesowania nasycenia oraz remanencją, a zawartością cząstek magnetycznych w nanokompozycie. Na podstawie obserwacji mikroskopowych stwierdzono, że część wprowadzonych cząstek magnetycznych ulega aglomeracji, reszta zaś pozostaje w dyspersji nanometrycznej. Wytworzone materiały nie wykazały toksycznego wpływu na komórki (Normal Human Osteoblast), co pozwala sądzić, że otrzymane nanokompozyty mogłyby zostać wykorzystane w medycynie.
Polymer nanocomposites are a wide group of materials which have applications in many branches of industry as well as in medicine. The phenomenon of nanocomposites is associated with simplicity of modification of their features, which are derived from properties of both the polymer matrix and the nanoadditive. This property enables to design and fabricate materials with strictly defined characteristics, addressed to specific needs. The aim of the presented studies was fabrication and characterization of polymer nanocomposites with magnetic properties. As a polymer matrix, a biocompatible and bioresorbable poly(ε-caprolactone) was used. Magnetite powder with nanometer-sized grain fraction was introduced into the polymer matrix as a magnetic nanoadditive. As a fabrication method casting film/solvent evaporation was applied. In order to examine how amount of magnetic nanoadditive influences the properties of nanocomposites, the series of materials with various concentrations of magnetic particles was prepared (0, 0.5, 1 and 2%). Characterization of materials included magnetic and surface properties investigations as well as evaluation of degradability, and biocompatibility of the fabricated materials. Magnetic hysteresis loops of both the nanoadditive itself and the nanocomposite demonstrate curves typical for multi-domain ferromagnetic materials. Existence of the correlation between the values of magnetic saturation and remanence, and the content of magnetic particles has been observed. Microscopic evaluations have shown that small part of magnetic particles has tendency to agglomerate but the rest remains in nanometric dispersion. For the fabricated materials no cytotoxic influence on the cells was observed (Normal Human Osteoblast). This suggests that obtained nanocomposites could find application in medicine.
Źródło:: Engineering of Biomaterials; 2014, 17, 127; 22-32
1429-7248
Pojawia się w:: Engineering of Biomaterials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of temperature changes
Autorzy:: Czaban, A.
Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/247080.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
temperature changes
external magnetic field
Opis:: There is presented an effect of the changes of the concentration of magnetic particles included in the ferro-oil on its dynamic viscosity in the presence of external magnetic field in this paper. The study was conducted in the context of temperature’s changes. The authors assume that the concentration of magnetic particles in ferro-oil can significantly affects its basic physical properties as dynamic viscosity, as well as the operational properties of journal sliding bearings ferro-oil’s lubricated. The equally significant as the above mentioned properties may affect the external environmental conditions of operation, especially temperature changes. In this context, an important technique’s issue appears to determine the principles of selection of optimal concentration of above mentioned particles according to the existing environmental conditions of its operation, or the expectations laid against the operation of the devices. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate-to-plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for four selected temperature range of 60º, 70º, 80º and 90ºC as regards changes an external magnetic field intensity 0-700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8%.
Źródło:: Journal of KONES; 2013, 20, 2; 55-60
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Effect of the magnetic particles concentration on the ferro-oil’s dynamic viscosity in presence of an external magnetic field in the aspect of shear rate’s variations
Autorzy:: Frycz, M.
Horak, W.
Powiązania:: https://bibliotekanauki.pl/articles/246160.pdf
Data publikacji:: 2013
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
rheometer
slide journal bearings
Opis:: The purpose of this study is to determine the effect of changes in the concentration of magnetic particles in ferrooil to change its physical properties, in particular the dynamic viscosity in a constant external magnetic field in terms of changes in shear rate and changes in the intensity of that field. Rheological studies were carried out on Physica MCR 301 rheometer in the “plate -plate” measurement system with an adapter to magneto-rheological studies MRD 180/1T. The applied adapter enable to obtain almost homogeneous distribution of magnetic field strength. Thermal stabilization was carried out by a water jacket in a closed chamber and controlling the nature of the magnetic field was conducted by current’s changes. Tests were performed for shear rate’s changes from 0 to 1000 1/s as regards changes an external magnetic field intensity 0–700 mT. The selected concentrations of magnetic particles in a ferro-oil were 1, 2, 4, 6 and 8% and the tested ferrofluid was product of FerroTec of Unterensingen (Germany), which is a mixture of colloidal mineral motor oil Penzzoil’s LongLife Gold's SAE 15W-40 with Fe3O4 magnetic particles and the surfactant. The paper presents, in the form of graphs, the changes of ferro-oil’s dynamic viscosity as a function of shear rate and concentration of magnetic particles in the aspect of external magnetic field’s intensity changes. The results of research were also subjected to analysis. The obtained characteristics of ferro-oil’s viscosity show clear evidence of non-Newtonian properties of the liquids. There is observed progression of these properties with increasing of magnetic particles concentration. This fact indicates the essential effect of the addition mentioned particles to the change of the ferro-oil’s viscosity characteristics.
Źródło:: Journal of KONES; 2013, 20, 3; 139-144
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: Eksperymentalna metoda wyznaczenia współczynników podatności magnetycznej χ ferroolejów o różnym stężeniu cząstek magnetycznych
Experimental method of determining the magnetic susceptibility coefficient χ for ferro-oils with different concentrations of magnetic particles
Autorzy:: Frycz, M.
Anioł, P.
Powiązania:: https://bibliotekanauki.pl/articles/187774.pdf
Data publikacji:: 2014
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferroolej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
Opis:: W niniejszym artykule została zaprezentowana budowa stanowiska badawczego do eksperymentalnego wyznaczenia współczynników podatności magnetycznej χ ferroolejów o różnym stężeniu cząstek magnetycznych oraz została przedstawiona analiza wyników pozyskanych tą metodą. Zewnętrzne, jednorodne, stałe pole magnetyczne uzyskano za pomocą dwóch płytek stałych magnesów umieszczonych równolegle, a zmiany wartości pola zadawano poprzez możliwość kontrolowanego przemieszczania tych magnesów względem siebie. Pomiędzy magnesami umieszczona została próbka badanego oleju, a wartości natężenia pola magnetycznego pomierzono z użyciem miernika indukcji pola magnetycznego Smart Magnetic Sensor SMS 102. Badaniom poddano ferrooleje o wybranych stężeniach cząstek magnetycznych, tj.: 8%, 6%, 4% oraz 2% objętościowo.
This paper presents the construction of an experimental test bench to determine the magnetic susceptibility coefficients χ of ferro oils with different concentrations of magnetic particles, and also the analysis of the results that were obtained by this method. The outer, homogeneous, constant magnetic field was obtained by means of the two plates of permanent magnets arranged in parallel, and changes the field value were carried out by the possibility of controlled movement of the magnets relative to each other. Samples of lubricants were placed between the magnets, and the magnetic field strength was measured by using the magnetic induction SMS Smart Magnetic Sensor 102. Ferro oils with selected concentrations of magnetic particles of 8%, 6%, 4%, and 2% were studied.
Źródło:: Tribologia; 2014, 3; 29-38
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Haemocompatibility and cytotoxic studies of non-metallic composite materials modified with magnetic nano and microparticles
Autorzy:: Szymonowicz, M.
Rybak, Z.
Fraczek-Szczypta, A.
Paluch, D.
Rusak, A.
Nowicka, K.
Blazewicz, M.
Powiązania:: https://bibliotekanauki.pl/articles/306490.pdf
Data publikacji:: 2015
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: nanokompozyty
cząstki magnetyczne
hemoliza
żywotność komórkowa
koagulacja
nanocomposite
magnetic particles
polysulfone
haemolysis
cell viability
coagulation systems
Opis:: Purpose: Preventing the formation of blood clots on the surface of biomaterials and investigation of the reasons of their formation are the leading topics of the research and development of biomaterials for implants placed into the bloodstream. Biocompatibility and stability of a material in body fluids and direct effect on blood cell counts components are related both to the structure and physico-chemical state of an implant surface. The aim of this study was to determine haemocompatibility and cytotoxicity of polysulfone-based samples containing nano and micro particles of magnetite (Fe3O4). Methods: The polysulfone-based samples modified with nanometric and micrometric magnetite particles were examined. Physicochemical properties of the composites were determined by testing their wettability and surface roughness. The action of haemolytic, activation of coagulation system and cytotoxicity of composites was evaluated. Results: Wettability and roughness of materials were correlated with nanoparticles and microparticles content. In the tests of plasma coagulation system shortening of activated partial thromboplastin time for polysulfone with nano magnetite and with micro magnetite particles was observed in comparison with pure polysulfone. Prothrombine time and thrombine time values as well as fibrinogen concentration were unchanged. Haemolysis values were normal. Morphology and viability of cells were normal. Conclusions: Composites made from polysulfone modified with nanoparticles and microparticles of magnetite cause neither haemolytic nor cytotoxic reaction. These composites evoke plasma endogenous system activation.
Źródło:: Acta of Bioengineering and Biomechanics; 2015, 17, 3; 49-58
1509-409X
2450-6303
Pojawia się w:: Acta of Bioengineering and Biomechanics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Simple guide for the fluorescent suspensions pre-selection in MPI depends on ambient light conditions and surface roughness
Przewodnik doboru MPI zawiesin fluorescencyjnych w zależności od warunków oświetlenia i chropowatości powierzchni
Autorzy:: Yaremenko, Y.
Powiązania:: https://bibliotekanauki.pl/articles/107830.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: magnetic-particles inspection
contrast of magnetic inks indications
fluorescence of indications
badania magnetyczno-proszkowe
kontrast wskazań magnetycznych zawiesin
fluorescencyjne wskazania
Opis:: Taking into consideration the rising expectations and demands of various industries, the constant requirement arise of customizing existent solutions or developing new products for the need of nondestructive testing and evaluation. Following the philosophy to provide personnel and environment friendly test media, as core requirement for each new development, we engineer our new solutions taking into account different process conditions and safety regulations. In case of magnetic particles inspection, we propose variety of fluorescent suspensions tailored to maximize contrast of indications depends on surface roughness and ambient lighting conditions. In current paper, we would like to illustrate how external light conditions contribute to fluorescent indications appearance on different examination surfaces, and how detection media cope with these variables, maximizing contrast of indications and making interpretation process easier.
Biorąc pod uwagę rosnące oczekiwania i wymagania różnych branż, pojawia się stały wymóg przed dostosowywaniem istniejących rozwiązań lub opracowywaniem nowych produktów na potrzeby nieniszczących testów i oceny. Zgodnie z tą filozofią, jako podstawowego wymogu, w celu dostarczenia środków przyjaznych dla operatorów i środowiska badań, opracowujemy nowe rozwiązania uwzględniające różne warunki procesu i przepisy bezpieczeństwa. W przypadku użycia metody MPI (Magnetic Particle Inspection) proponujemy stosowanie różnorodnych zawiesin fluorescencyjnych by uzyskać maksymalizację kontrastu wskazań zależnych od chropowatości powierzchni i warunków oświetlenia otoczenia. W bieżącym artykule chcemy zilustrować, jak zewnętrzne warunki świetlne wpływają na wygląd wskaźników fluorescencyjnych na różnych powierzchniach badanych oraz jak media reagują na te zmienne, zwiększając kontrast wskazań i ułatwiając interpretację.
Źródło:: Badania Nieniszczące i Diagnostyka; 2017, 4; 3-6
2451-4462
2543-7755
Pojawia się w:: Badania Nieniszczące i Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Materiał magnetyczny w części nierozpuszczalnej soli wysadu Góra (otwór G-40) – najnowsze wyniki i ich odniesienie do wcześniejszych prac
Magnetic particles in the insoluble material from Góra Salt Dome (G-40) – the latest results and their reference to previous works
Autorzy:: Jaworska, Joanna
Borowczyk, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/2192071.pdf
Data publikacji:: 2018
Wydawca:: Polskie Stowarzyszenie Górnictwa Solnego
Tematy:: sole cechsztyńskie
rezyduum
składnik magnetyczny
antropogeniczny czy pozaziemski materiał
Zechstein salt
residuum
magnetic particles
anthropogenic or extraterrestrial material
Opis:: W celu zbadania pochodzenia materiału magnetycznego w próbkach soli cechsztyńskich przeanalizowano dostępny, siedmiometrowy fragment rdzenia G-40, z głębokości 510- 528 m p.p.t., pozyskanego z wysadu Góra (ryc. 1). Szczególną uwagę poświęcono wykluczeniu możliwości udziału materiału pochodzenia antropogenicznego wśród materii magnetycznej stanowiącej składniki rezyduum z rozpuszczenia soli. Łącznie rozpuszczono 96,874 kg soli cechsztyńskiej uzyskując po osuszeniu 1069,8 g suchej pozostałości. Średnia zawartość rezyduum dla przebadanych fragmentów rdzenia wyniosła 1,12%. Wśród materiału magnetycznego zebrano jedynie nieregularne, blaszkowate ziarna o rozmiarach od 150 do ok. 400 μm (ryc. 2). Przebadane ziarna magnetyczne zawierają 52,7-84,2 % tlenku żelaza Fe2O3, ok. 0,3-3,04% tlenku glinu, a także krzemionkę, sód, wapń lub mangan. W 2 próbkach odnotowano obecność cynku oraz w pojedynczych molibdenu, wolframu, a także fosforu. Ponieważ każdy etap pracy przygotowawczej, a także późniejszej, laboratoryjnej odbywał się ze szczególną dbałością o zachowanie sterylności próbek, należy wykluczyć możliwość udziału – przedostania się do analizowanego materiału składników pochodzenia antropogenicznego. Zatem pochodzenie kosmiczne materiału magnetycznego o kształtach nieregularnych jest bardzo prawdopodobne. W badanym materiale nie stwierdzono obecności żadnej formy kulistej – sferuli. Tym samym obecność form kulistych – sferulek w większych ilościach (zob. praca L. Mazura 1973, tab. 1), może budzić wątpliwości.
Near 97 kg of salt samples from borehole G-40 from Góra Salt Dome (fig. 1) was obtained and dissolved. There was analysed insoluble material, which was characterized by high magnetisation. All analyzed salt samples come from 2-nd Zechstein (Late Permian) cyclothem Stassfurt, from deep 510-528 m b.g.l. The collected material (15 grains) are representing only one type form - irregular particles, plates form of size 150 to over 400 μm (see fig. 2). There was not noted any regular, spherical form – spherules. This material was analysed using the SEM - EDS. The chemical composition of particles ranges from 52,7 to 84,2 % iron oxide and 0,3-3,04 % aluminium oxide. In none of the samples was noted Ni. Irregular particles have rough surface and sharp edges. The origin of this material can be extraterrestrial. Highly probably that this particles are cosmic dust, micrometeorites or small shattered fragments of bigger meteorite body. The possibility of participation of anthropogenic material as accidental contamination of analyzed samples has been rather excluded.
Źródło:: Przegląd Solny; 2018, 14; 70--76
2300-9349
Pojawia się w:: Przegląd Solny
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: Researching and modeling of the dynamic viscosity of the ferro-oils with the different concentrations of magnetic particles in the aspect of pressure changes
Badania i modelowanie lepkości dynamicznej ferro-olejów o różnym stężeniu cząstek magnetycznych w aspekcie zmian ciśnienia
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/190936.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic particles concentration
pressure changes
models of viscosity
ferro-olej
stężenie cząstek magnetycznych
zmiany ciśnienia
modele lepkości
Opis:: In this article, the results of the experimental research of determining the dynamic viscosity of the ferro-oils with different concentration of the magnetic particles in terms of pressure change are presented. The research was conducted on the Thermo Scientific Haake Mars III rheometer in the configuration with a pressure chamber. The applied configuration allowed the author to conduct research on the change of viscosity for the selected pressure values p in range from 0 to 100 bars. The research was conducted for three selected temperature values, including t = 30°C, 60°C, and 90°C, as well as selected shear rates of 200 and 600s-1. The chosen concentration values of the magnetic particles were nCS = 1%, 2%, 4%, 6%, and 8%. The viscous characteristics gathered as a result of the research have been analysed with the aim of identifying the nature of the correlations and to create mathematical-physical models of changes in the dynamic viscosity of the ferrooils due to the change in pressure in terms of concentrations of the magnetic particles. Analysis, identification, and adaptation of the characteristics were conducted using the StatSoft STATISTICA ver. 9 software. Selected mathematical adaptations of the acquired results were submitted through the enhanced analysis. In addition, parameters of the course of functions were designated and their qualitative assessments were made.
W artykule zaprezentowane zostały wyniki eksperymentalnych badań wyznaczania lepkości dynamicznej ferro-olejów o różnym stężeniu cząstek magnetycznych w aspekcie zmian ciśnienia. Badania zostały przeprowadzone na reometrze Thermo Scientific Haake Mars III w konfiguracji z tzw. komorą ciśnieniową. Zastosowana konfiguracja pozwalała na prowadzenie badań zmian lepkości dla wybranych wartości ciśnienia p z zakresu od 0 do 100 bar. Badania przeprowadzono dla trzech wybranych wartości temperatur dla t = 30°C, 60°C oraz 90°C i wybranych prędkości ścinania: 200 oraz 600 s-1. Przyjęte wartości stężenia cząstek magnetycznych wynosiły nCS = 1%, 2%, 4%, 6% i 8%. Uzyskane w wyniku badań charakterystyki lepkościowe poddane zostały analizie zmierzającej do identyfikacji charakteru zależności i wykreowanie matematyczno-fizycznych modeli zmian lepkości dynamicznej ferro-olejów od zmian ciśnienia w aspekcie stężenia cząstek magnetycznych. Analizy, identyfikacji i dopasowania charakterystyk dokonano przy wykorzystaniu oprogramowania StatSoft STATISTICA wer. 9. Pogłębionej analizie poddano wyselekcjonowane dopasowania matematyczne uzyskanych wyników doświadczalnych. Wyznaczono ponadto parametry przebiegu funkcji i dokonano ich oceny jakościowej.
Źródło:: Tribologia; 2017, 272, 2; 39-48
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 16.

Tytuł:: The influence of temperature on coefficient of magnetic susceptibility χ of ferro-oils with different concentrations of magnetic particles
Wpływ temperatury na współczynnik podatności magnetycznej χ ferro-olejów o różnym stężeniu cząstek magnetycznych
Autorzy:: Frycz, M.
Powiązania:: https://bibliotekanauki.pl/articles/188357.pdf
Data publikacji:: 2016
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: ferro-oil
magnetic susceptibility coefficient
magnetic particles concentration
slide journal bearings lubrication
ferrr-olej
współczynnik podatności magnetycznej
stężenie cząstek magnetycznych
smarowanie poprzecznych łożysk ślizgowych
Opis:: In this paper, the authors presented research concerning the determination of the relation between magnetic susceptibility coefficient χ of ferro-oil and temperature changes. The tests were conducted on the ferro-oil samples of various, chosen magnetic particles concentrations: 1%, 2%, 4%, 6%, and 8%. In accordance with the conclusions resulting from Curie-Weiss equation, the values of magnetic susceptibility χ depend on the physicochemical features of considered material, including the magnitude and amount (concentration) of magnetic particles and physical properties of its environment, i.e. the kind and direction of magnetic field and also on the operating temperature, which is the main subject of conducted tests in this paper. This article presents the structure of the bench used for experimental designation of magnetic susceptibility coefficient in relation to temperature changes of tested ferro-oil. Moreover, the authors demonstrated a method enabling the determination of these values from obtained measurement data, conducted the analysis of obtained results and presented the conclusions.
W niniejszym artykule zostały przedstawione badania dotyczące określenia zależności współczynnika podatności magnetycznej χ ferro-oleju od zmian temperatury. Badaniom poddane zostały próbki ferro-olejów o różnych, wybranych stężeniach cząstek magnetycznych: 1%, 2%, 4%, 6% i 8%. Zgodnie z wnioskami wynikającymi z równania Curie-Weissa wartości podatności magnetycznej χ zależą głównie od własnych cech fizykochemicznych rozpatrywanego materiału, w tym od wielkości i ilości (stężenia) cząstek magnetycznych oraz od fizycznych właściwości jego otoczenia, tj.: rodzaju i kierunku pola magnetycznego, jak również od temperatury pracy, która stanowi zasadniczy temat podjętych badań. W artykule zaprezentowana została budowa stanowiska do eksperymentalnego wyznaczenia współczynnika podatności magnetycznej w kontekście zmian temperatury badanego ferro-oleju. Ponadto zaprezentowana została metoda umożliwiająca wyznaczenie tych wartości z pozyskanych danych pomiarowych oraz dokonano analizy uzyskanych wyników zakończonej wnioskami.
Źródło:: Tribologia; 2016, 269, 5; 21-30
0208-7774
Pojawia się w:: Tribologia
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 17.

Tytuł:: Influence of magnetic particles concentration in ferro-oil on values of friction force and coefficient of friction of slide journal bearing
Autorzy:: Frycz, M.
Miszczak, A.
Powiązania:: https://bibliotekanauki.pl/articles/243124.pdf
Data publikacji:: 2017
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: ferro-oil
dynamic viscosity
magnetic particles concentration
friction force
friction coefficient
lepkość dynamiczna
stężenie cząstek magnetycznych
siła tarcia
współczynnik tarcia
Opis:: This article has been focused on the analysis of changes in friction force as well as coefficient of friction of slide journal bearing in terms of the concentration of magnetic particles in the lubricating ferro-oil. There has been present an analytical and numerical calculation model based on experimentally determined physical quantities describing the dependence of ferro-oil’s viscosity on fundamental parameters such as temperature, pressure or external magnetic field in the paper. Numerical calculations of the dimensionless friction force as well as the dimensionless friction coefficient were performed by solving the Reynold’s type equation using the finite difference method using Mathcad 15 and own calculation procedures. The obtained results has been presented in the form of a series of graphs that take into account: the influence of external magnetic field, corrections related to the influence of pressure changes, corrections related to the influence of temperature changes and finally corrections related to non-Newtonian ferro-oil properties. An analysis of the obtained characteristics has been made so the observations and conclusions were drawn regarding optimum magnetic particle content in the ferro-oil lubricating the sliding journal bearing.
Źródło:: Journal of KONES; 2017, 24, 1; 143-150
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 18.

Tytuł:: Ultraviolet irradiation hazard aspects and proactive ways of its impact reduction on personnel performing penetrant or magnetic particles testing
Aspekty zagrożenia napromieniowaniem UV oraz aktywne sposoby redukcji jego oddziaływania na personel wykonujący badania penetracyjne lub magnetyczne
Autorzy:: Yaremenko, Y.
Powiązania:: https://bibliotekanauki.pl/articles/107925.pdf
Data publikacji:: 2017
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: fluorescent penetrant testing
magnetic-particles inspection
UV irradiation
personnel safety
fluorescencyjne testy penetracyjne
badania magnetyczno-proszkowe
promieniowanie UV
bezpieczeństwo personelu
Opis:: Ultraviolet (UV) irradiation is a part of interpretation process in fluorescent sub-methods of penetrant testing (PT) and magnetic particles inspection (MPI). Therefore exposure to UV and its hazard consequences should be considered by Health and Safety Executives inherently with test media hazards. UV filtered spectacles, masks and clothing which covers exposed parts of the body are essential part of protective measures for operators. Alongside with the operator, the risk of exposure for surrounding personnel is always existent. Therefore, comprehensive approach to protective measures is needed, and UV basics, UV harmful impact and types of artificial sources should be studied more thoroughly. This work analyzes hazard aspects of UV irradiation, compares UV irradiation influence emitted from different UV sources and offers to consider UV LED sources as proactive measure of UV exposure reduction on personnel.
Promieniowanie ultrafioletowe (UV) jest stałym elementem w procesie interpretacji wyników badań penetracyjnych (PT) oraz magnetycznoproszkowych (MP). Dlatego konieczne jest rozważenie skutków zagrożeń spowodowanych ekspozycją na promienie UV przez służby BHP. Okulary, maski i odzież, która obejmuje odsłonięte części ciała, są istotną częścią środków ochronnych dla operatorów. Ryzyko narażenia personelu uczestniczącego w badaniach istnieje zawsze. Dlatego kompleksowe podejście do środków ochronnych UV jest potrzebne, a szkodliwe oddziaływanie i rodzaje sztucznych źródeł promieniowania powinny być zbadane bardziej dokładnie. Ta praca analizuje aspekty zagrożenia napromieniowania UV, porównuje wpływ promieniowania ultrafioletowego emitowanego z różnych źródeł promieniowania UV i oferuje do rozważenia UV LED jako źródła aktywnego środka redukcji narażenia pracowników na promieniowanie UV.
Źródło:: Badania Nieniszczące i Diagnostyka; 2017, 1-2; 3-5
2451-4462
2543-7755
Pojawia się w:: Badania Nieniszczące i Diagnostyka
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 19.

Tytuł:: Studies of a mixing process induced by a rotating magnetic field with the application of magnetic particles
Autorzy:: Rakoczy, Rafał
Kordas, Marian
Markowska-Szczupak, Agata
Konopacki, Maciej
Augustyniak, Adrian
Jabłońska, Joanna
Paszkiewicz, Oliwia
Dubrowska, Kamila
Story, Grzegorz
Story, Anna
Ziętarska, Katarzyna
Sołoducha, Dawid
Borowski, Tomasz
Roszak, Marta
Grygorcewicz, Bartłomiej
Dołęgowska, Barbara
Powiązania:: https://bibliotekanauki.pl/articles/2086782.pdf
Data publikacji:: 2021
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: mixing process
alternating magnetic field
magnetic particles
mixing time
Navier–Stokes equation
proces mieszania
zmienne pole magnetyczne
cząstki magnetyczne
czas mieszania
równanie Naviera-Stokesa
Opis:: We demonstrate in this study that a rotating magnetic field (RMF) and spinning magnetic particles using this kind of magnetic field give rise to a motion mechanism capable of triggering mixing effect in liquids. In this experimental work two mixing mechanisms were used, magnetohydrodynamics due to the Lorentz force and mixing due to magnetic particles under the action of RMF, acted upon by the Kelvin force. To evidence these mechanisms, we report mixing time measured during the neutralization process (weak acid-strong base) under the action of RMF with and without magnetic particles. The efficiency of the mixing process was enhanced by a maximum of 6.5% and 12.8% owing to the application of RMF and the synergistic effect of magnetic field and magnetic particles, respectively
Źródło:: Chemical and Process Engineering; 2021, 42, 2; 157--172
0208-6425
2300-1925
Pojawia się w:: Chemical and Process Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 20.

Tytuł:: Kinetic energy partitions in electron–ion PIC simulations of ABC fields
Autorzy:: Chen, Qiang
Powiązania:: https://bibliotekanauki.pl/articles/2202567.pdf
Data publikacji:: 2023
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: acceleration of particles
magnetic reconnection
relativisitc processes
simulations
Opis:: We explore the kinetic energy partitions between electrons and ions in the 2-D magnetostatic equilibria called Arnold–Beltrami–Childress (ABC) fields, using particle-in-cell (PIC) numerical simulations. We cover a wider range of ion–electron temperature combinations and get different results compared to previous studies of the Harris-layer-type magnetic reconnection simulations. We find that the initial ion–electron enthalpy ratio is an important indicator. The particle species that dominates the total enthalpy will also dominate the kinetic energy gains and the momentum distribution peaks, but the other species have higher nonthermal energy fractions because both species show similar maximum energies.
Źródło:: Nukleonika; 2023, 68, 1; 25--28
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 21.

Tytuł:: Overview of recent results from the WEGA stellarator
Autorzy:: Otte, M.
Laqua, H. P.
Chlechowitz, E.
Marsen, S.
Preinhaelter, J.
Stange, T.
Rodatos, A.
Urban, J.
Zhang, D.
Powiązania:: https://bibliotekanauki.pl/articles/147486.pdf
Data publikacji:: 2012
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: magnetic confinement
supra-thermal particles
electron Bernstein waves
Opis:: Repeated magnetic flux surface measurements confirmed the existence of closed and nested flux surfaces, but also revealed the existence of magnetic error fields. The simultaneous application of two radio frequency systems for plasma heating operating at 28 GHz and 2.45 GHz, respectively, allowed to reach otherwise non-accessible plasma regimes in WEGA due to synergetic effects. These regimes are characterized by over-dense plasmas at 0.5 T operation by means of electron Bernstein wave heating and the existence of supra-thermal electrons associated with soft X-ray and gamma-rays. The thermal electron diffusion coefficient was determined in the electron Bernstein wave heated plasma regime. Additionally, results from turbulence studies in low density plasmas in the vicinity of magnetic islands are presented.
Źródło:: Nukleonika; 2012, 57, 2; 171-175
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 22.

Tytuł:: The Magnetic Moments of Single-Domain and its Mathematics Formation
Autorzy:: Mezher, Sabah Jameel
Powiązania:: https://bibliotekanauki.pl/articles/1192618.pdf
Data publikacji:: 2016
Wydawca:: Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:: Magnetic Moments
Single domain
uniaxial particles
rock magnetism
palaeomagnetism
magnetic materials
diverse phenomena
Opis:: We now demonstrate that such "uniaxial" particles can allow several quantiﬁable stable (or metastable) orientations of the magnetic moment within the same particle. A new model is presented with quantitative predictions veriﬁed by experiments. The results have important implications for rock magnetism, palaeomagnetism, and magnetic materials research. Firstly, the new model quantitatively accounts for several previously unexplained diverse phenomena exhibited by such single-domain (SD) particles. Including the acquisition of gyroremanences, tiled-impressed anisotropy, and transverse components of reminisce in individual particles. These phenomena are theoretically impossible in idealized uniaxial single domain particles, and could now be used to quantify the deviation of real particles from ideal behavior. Secondly, deﬂections of the natural remanence vector and computations of the ancient field vector and paleointensity are not only controlled by the shape and distribution of the particles, but also by the possible stable orientations of the moments within single-domain particles. The model is also relevant to other single-domain particle morphologies.
Źródło:: World Scientific News; 2016, 60; 92-102
2392-2192
Pojawia się w:: World Scientific News
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 23.

Tytuł:: Study on condition prediction and influencing factors of manganese carbonate recovery by high gradient pulse magnetic separation
Autorzy:: Wang, Zhenggang
Nie, Guanghua
Tang, Yun
Piao, Haishan
Chen, Jian
Powiązania:: https://bibliotekanauki.pl/articles/24085829.pdf
Data publikacji:: 2023
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: mineral particles
impulse
volume susceptibility
magnetic field strength
DLVO theory
Opis:: Manganese carbonate ore belongs to weakly magnetic minerals, and its co-associated minerals are mainly non-magnetic minerals, which can be separated from gangue minerals at high magnetic field intensity. However, manganese grade and recovery of magnetic separation concentrate of manganese carbonate ore are low in actual production. Therefore, the influences of manganese carbonate particle size, magnetic field intensity, volume susceptibility, pulse stroke, pH, and other factors were studied. The optimal test conditions for manganese carbonate ore recovery by high-gradient magnetic separation were predicted through the calculation results. The results show that the particle radius of manganese carbonate is 0.020 mm, the pulse impulse time is 200 r/min, and the magnetic field intensity is 0.9 T. The optimum condition test was carried out with Qianbei manganese carbonate ore as the material. The test results show that the optimum conditions are the particle radius of 0.074-0.019 mm, pulse impulse time of 200 r/min, and magnetic field intensity of 1.2 T. The reason for the deviation is that the actual ore has a fine distribution particle size, many associative bodies, complex composition, and serious agglomeration, resulting in variable particle volume susceptibility. The capture yield increases with the increase of magnetic field intensity and volume susceptibility but decreases with the increase of pulse. The lower the surface potential of manganese carbonate, the higher the recovery of manganese carbonate. The grade of manganese concentrate was 19.06% and the recovery was 76.85%. Mixed manganese concentrate with a grade of 18.04% and recovery of 87.14% was obtained by adding drugs and changing the grinding method.
Źródło:: Physicochemical Problems of Mineral Processing; 2023, 59, 3; art. no. 168668
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 24.

Tytuł:: On thermal instability of Kuvshiniski fluid with suspended particles saturated in a porous medium in the presence of a magnetic field
Autorzy:: Singh, M.
Powiązania:: https://bibliotekanauki.pl/articles/265476.pdf
Data publikacji:: 2017
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: thermal convection
Kuvshiniski fluid
suspended particles
magnetic field
porous medium
Opis:: The thermal instability of a Kuvshiniski viscoelastic fluid is considered to include the effects of a uniform horizontal magnetic field, suspended particles saturated in a porous medium. The analysis is carried out within the framework of the linear stability theory and normal mode technique. For the case of stationary convection, the Kuvshiniski viscoelastic fluid behaves like a Newtonian fluid and the magnetic field has a stabilizing effect, whereas medium permeability and suspended particles are found to have a destabilizing effect on the system, oscillatory modes are introduced in the system, in the absence of these the principle of exchange of stabilities is valid. Graphs in each case have been plotted by giving numerical values to the parameters, depicting the stability characteristics. Sufficient conditions for the avoidance of overstability are also obtained.
Źródło:: International Journal of Applied Mechanics and Engineering; 2017, 22, 4; 981-994
1734-4492
2353-9003
Pojawia się w:: International Journal of Applied Mechanics and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 25.

Tytuł:: Application of magnetic separation and reverse anionic flotation to concentrate fine particles of iron ore with high sulfur content
Autorzy:: Dehghani, Fahimeh
Khosravi, Rasoul
Pazoki, Amir
Kebe, Moustapha
Jahanian, Reza
Siavoshi, Hossein
Ghosh, Tathagata
Powiązania:: https://bibliotekanauki.pl/articles/2146898.pdf
Data publikacji:: 2022
Wydawca:: Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:: iron ore
fine particles
magnetic separation
reverse anionic flotation
sulfur
Opis:: The sulfur content in iron ore causes technical problems in the process of sintering iron ore in steel and alloys, and environmental problems in discharging the tailing. The major challenge in the iron ore processing plant is handling the finer particles. The key objectives of this research included the concentration of Band Narges Mine iron ore (< 150 μm) as well as the reduction of the sulfur content to achieve a marketable product. First, the mineralogical characterization of iron ore was established, which showed that Fe3O4, SiO2, and CaO were the predominant minerals in the ore body. Moreover, magnetite particles with a size of < 150 μm were mainly locked into the associated gangue mineral. Second, metallurgical experiments were conducted, including magnetic separation and froth flotation. To increase the iron grade and recovery and decrease the sulfur content, two separate process flowsheets were tested, three steps of magnetic separation with a magnetic field strength of 2000 G were used in the first process flowsheets, followed by regrinding to < 74 μm and application of a three-stage reverse flotation. The overall iron grade and recovery were 76.38% and 67.9%, respectively, from this flowsheet. A five-stage successive reverse flotation followed by three stages of magnetic separation at 1000 G was carried out in the second flowsheet. The final recovery and grade of iron for this flowsheet were 77.15% and 64.3%, respectively. The ultimate content of sulfur was estimated at 0.74%.
Źródło:: Physicochemical Problems of Mineral Processing; 2022, 58, 3; art. no. 145420
1643-1049
2084-4735
Pojawia się w:: Physicochemical Problems of Mineral Processing
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 26.

Tytuł:: Stability of superposed fluids through magnetic field with suspended particles of different permeability saturated through porous layer
Autorzy:: Singh, M.
Powiązania:: https://bibliotekanauki.pl/articles/265428.pdf
Data publikacji:: 2015
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: porous medium
suspended particles
Rivlin-Ericksen fluid
magnetic field
porowatość
pole magnetyczne
ciecz Rivlina-Ericksena
Opis:: The instability of plane interface between two superposed Rivlin-Ericksen elastico-viscous fluids saturated through a porous medium has been studied to include the suspended (dust) particles effect. Following the linearized stability theory and normal mode analysis the dispersion relation is obtained. For stationary convection, the Rivlin-Ericksen elastico-viscous fluid behaves like Newtonian fluids. It found that for a potentially stable arrangement the Rivlin-Ericksen elastico-viscous fluid of different permeabilities in the presence of suspended particles in a porous medium is stable, whereas in a potentially unstable case instability of the system occurs. In the presence of a magnetic field for a potentially stable arrangement the system is always stable and for the potentially unstable arrangement, the magnetic field succeeds in stabilizing certain wave-number band which was unstable in the absence of the magnetic field.
Źródło:: International Journal of Applied Mechanics and Engineering; 2015, 20, 4; 889-898
1734-4492
2353-9003
Pojawia się w:: International Journal of Applied Mechanics and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 27.

Tytuł:: Effect Of Heat-Treatment On Microstructure And Magnetic Properties Of Nanocrystallized Mn-Zn Ferrite Powders
Wpływ obróbki cieplnej na mikrostrukturę i właściwości magnetyczne nanokrystalicznych proszków ferrytu Mn-Zn
Autorzy:: Lee, W. H.
Hong, C. S.
Chang, S. Y.
Powiązania:: https://bibliotekanauki.pl/articles/351552.pdf
Data publikacji:: 2015
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: high energy ball milling
nanosized particles
crystallite size
magnetic properties
frezowanie kulowe
nanocząstki
wielkości krystalitów
właściwości magnetyczne
Opis:: The initial ferrite powders were subjected to high energy ball milling at 300rpm for 3h, and subsequently heat-treated at 573-1273K for 1h. Based on the observation of microstructure and measurement of magnetic properties, the heat-treatment effect was investigated. The size of initial powders was approximately 70μm. After milling, the powders with approximately 230nm in size were obtained, which were composed of the nano-sized particles of approximately 15nm in size. The milled powders became larger to approximately 550nm after heat-treatment at 973K. In addition, the size of particles increased to approximately 120nm with increasing temperature up to 973K. The coercivity of initial powders was almost unchanged after milling, whereas the saturation magnetization increased. As the heat-treatment temperature increased, the saturation magnetization gradually increased and the maximum coercivity was obtained at 773K.
Źródło:: Archives of Metallurgy and Materials; 2015, 60, 2B; 1347-1350
1733-3490
Pojawia się w:: Archives of Metallurgy and Materials
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 28.

Tytuł:: Effect of hall currents on thermal instability of dusty couple stress fluid
Autorzy:: Aggarwal, A. K.
Verma, A.
Powiązania:: https://bibliotekanauki.pl/articles/240229.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: couple-stress fluid
dust particles
hall currents
stationary convection
oscillatory modes
magnetic field
ziarna pyłu
konwekcja
pole magnetyczne
Opis:: In this paper, effect of Hall currents on the thermal instability of couple-stress fluid permeated with dust particles has been considered. Following the linearized stability theory and normal mode analysis, the dispersion relation is obtained. For the case of stationary convection, dust particles and Hall currents are found to have destabilizing effect while couple stresses have stabilizing effect on the system. Magnetic field induced by Hall currents has stabilizing/destabilizing effect under certain conditions. It is found that due to the presence of Hall currents (hence magnetic field), oscillatory modes are produced which were non-existent in their absence.
Źródło:: Archives of Thermodynamics; 2016, 37, 3; 3-18
1231-0956
2083-6023
Pojawia się w:: Archives of Thermodynamics
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 29.

Tytuł:: On a couple-stress Rivlin-Ericksen ferromagnetic fluid heated from below with varying gravity, rotation, magnetic field and suspended particles flowing through a porous medium
Autorzy:: Rahul
Sharma, Naveen
Powiązania:: https://bibliotekanauki.pl/articles/2174204.pdf
Data publikacji:: 2022
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: niestabilność termiczna
pole magnetyczne
płyn ferromagnetyczny
naprężenie
thermal instability
magnetic field
couple-stress fluid
ferromagnetic fluid
suspended particles
Opis:: The thermal instability of a couple-stress Rivlin-Ericksen ferromagnetic fluid with varying gravity field, suspended particles, rotation and magnetic field flowing through a porous medium is investigated. The dispersion relation has been developed and solved analytically using the normal mode approach and linear stability theory. The effect of suspended particles, rotation, couple stress, permeability and magnetic field on the fluid layer has been investigated. For stationary conventions, it is found that suspended particles always have a destabilizing effect for λ>0 and a stabilizing effect for λ<0 and couple-stress, magnetic field and permeability of the medium have a stabilizing effect on the thermal instability under certain conditions. In the absence of the rotation couple-stress has a stabilizing effect if λ >0 and a destabilizing effect if λ<0. Rotation has a stabilizing effect if λ >0 and a destabilizing effect if λ<0. In the absence of rotation permeability has a stabilizing effect if λ<0 and a destabilizing effect if λ>0. Magnetisation always has a stabilizing effect ( λ>0 or λ<0).
Źródło:: International Journal of Applied Mechanics and Engineering; 2022, 27, 2; 177--198
1734-4492
2353-9003
Pojawia się w:: International Journal of Applied Mechanics and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 30.

Tytuł:: Hydrodynamic and hydromagnetic stability of two superposed elastico – viscous fluids of different permeability with dust in porous medium
Autorzy:: Singh, M.
Mehta, C. B.
Powiązania:: https://bibliotekanauki.pl/articles/266188.pdf
Data publikacji:: 2015
Wydawca:: Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:: Rayleigh-Taylor instability
magnetic field
suspended particles
Walters' B fluid
different permeability and porous medium
pole magnetyczne
materiały porowate
lepkość płynu
Opis:: Rayleigh-Taylor instability of two superposed Walters’ B has elastico-viscous fluids in a uniform magnetic field through a porous medium with different permeability been studied to include the suspended (dust) particles effect. Using normal mode technique a dispersion relation has been derived. The stability analysis has been carried out. The magnetic field stabilizes the unstable configuration for the wave number band K > K* in chich the system is unstable in the absence of the magnetic field. It is also found that for a potential stable arrangement for Walters B’ elastico-viscous fluids of different permeabilities in the presence of suspended particles through a porous medium the system is stable, whereas in the potentially unstable case instability of the system occurs.
Źródło:: International Journal of Applied Mechanics and Engineering; 2015, 20, 2; 407-416
1734-4492
2353-9003
Pojawia się w:: International Journal of Applied Mechanics and Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "magnetic particles" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język