Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "komfort termiczny" wg kryterium: Temat


Wyświetlanie 1-23 z 23
Tytuł:
Thermal comfort assessment of a flood – affected building microclimate
Autorzy:
Wiśniewska, M.
Powiązania:
https://bibliotekanauki.pl/articles/96778.pdf
Data publikacji:
2018
Wydawca:
Fundacja Ekonomistów Środowiska i Zasobów Naturalnych
Tematy:
flood
microclimate
thermal comfort
powódź
mikroklimat
komfort termiczny
Opis:
In 2010, Plock Country, which is located in Poland, was affected by two flood waves that covered approx. 7 hectares of land located in two communes. This paper presents one of the single-family homes affected by the flooding. The aim of the work is to evaluate the building’s microclimate, in terms of its thermal comfort, on the basis of a conducted survey. The studies involved measurements of the basic microclimate parameters, including temperature, relative air humidity and temperature on the internal surface of the partition walls. On the basis of the survey results, analyses were made of the variability of the microclimate parameters as well as of the dependencies between these parameters inside the building.
Źródło:
Ekonomia i Środowisko; 2018, 3; 127-141
0867-8898
Pojawia się w:
Ekonomia i Środowisko
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The analysis of thermal comfort in the school and the wedding house
Analiza komfortu cieplnego w szkole i domu weselnym
Autorzy:
Zender-Świercz, E.
Jędrzejczyk, O.
Kaczorowska, K.
Powiązania:
https://bibliotekanauki.pl/articles/402185.pdf
Data publikacji:
2018
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
thermal comfort
air conditioning
simulation
komfort termiczny
klimatyzacja
symulacje
Opis:
The environment, where people are staying, should provide thermal comfort. It means that the equilibrium of the amount of heat produced in the human body and the amount of heat lost to the environment should be kept. To achieve the suitable conditions of air there the air conditioning, ventilation and heating systems are used. These systems regulate the air parameters and maintain them at the desired level. Designers locate, most commonly, the supply units of air conditioning systems in the ceiling in the central part of the room or near the windows without taking into account the specificity of the premises. However, such an approach may contribute to the lack of thermal comfort. The sensation of air is a very subjective indicator that depends on many variables. The authors of the article made an attempt to analyze the influence of the type of air conditioning system and location of air supply units on the thermal comfort in rooms of different use.
Środowisko, w którym przebywa człowiek powinno zapewniać odczuwanie komfortu. tzn. powinna być zachowana równowaga pomiędzy ilością ciepła wytwarzanego w ciele człowieka a ilością ciepła traconego do otoczenia. Aby uzyskać taki stan powietrza w pomieszczeniach, stosuje się różne systemy wentylacji, klimatyzacji i ogrzewania. Układy te regulują parametry powietrza i utrzymują je na żądanym poziomie. Projektanci lokalizują elementy nawiewne instalacji klimatyzacji najczęściej w suficie w centralnej części pomieszczenia lub przy oknach bez uwzględniania specyfiki pomieszczenia. Jednak takie spojrzenie na instalację może przyczynić się do braku warunków komfortu cieplnego. Postrzeganie stanu powietrza jest bardzo subiektywnym wskaźnikiem zależnym od wielu zmiennych. W artykule podjęto próbę analizy wpływu rodzaju instalacji klimatyzacji oraz rozmieszczenia elementów nawiewnych w pomieszczeniach o różnym przeznaczeniu.
Źródło:
Structure and Environment; 2018, 10, 1; 75-81
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Comfort Properties of Bamboo/Silk Fabrics
Komfort termiczny i właściwości tkanin bambusowo-jedwabnych
Autorzy:
Geethanjali, T.
Prakash, C.
Ramesh Babu, V.
Jebastin Rajwin, A.
Powiązania:
https://bibliotekanauki.pl/articles/1419797.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
bamboo
comfort
knitted fabric
thermal comfort
silk
bambus
komfort
dzianina
komfort termiczny
jedwab
Opis:
The thermal resistance of fabrics containing silk showed a higher value in comparison with lyocell-rich blends. The water vapour permeability, absorbency and wickability of lyocell and lyocell-rich blends were found to be superior as compared to 100% silk fabrics. With respect to aesthetic comfort properties, the drape of the lyocell rich fabrics was good in comparison with 100% silk fabrics.
W badaniu stwierdzono, że tkaniny zawierające jedwab mają wyższą wartość oporu cieplnego w porównaniu z mieszankami bogatymi w Lyocell. Stwierdzono również, że przepuszczalność pary wodnej, nasiąkliwość i podatność na skręcanie Lyocell i mieszanek bogatych w Lyocell były lepsze w porównaniu ze 100% tkaninami jedwabnymi. Pod względem komfortu estetycznego, tkanin bogatych w Lyocell wypadły lepiej, w porównaniu z tkaninami 100% jedwabnymi.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 2 (146); 36-40
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Comfort Properties of Bi-Layer Knitted Fabrics
Właściwości termiczne dzianin dwuwarstwowych
Autorzy:
Udaya Krithika, S. M.
Prakash, C.
Sampath, M. B.
Senthil Kumar, M.
Powiązania:
https://bibliotekanauki.pl/articles/232802.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
bi-layer knitted fabric
polyester
comfort
thermal comfort
dzianina dwuwarstwowa
poliester
komfort
komfort termiczny
Opis:
Transmission of sensible and insensible perspiration is an important factor for fabric comfort. Improvement in the thermal comfort properties of knitted fabrics results in the achievement of fabric comfort. In this research, the thermal comfort properties of six bi-layer knitted fabrics were studied. The bi-layer knitted fabrics were made with different combinations of yarn in the inner layer and outer layer. The yarn combinations selected were polyester staple yarn-polyester staple yarn, polyester staple yarn-cotton, cotton-cotton, polypropylene-cotton, micro denier polyester-cotton, and micro denier polyester- micro denier polyester for the inner and outer layers, respectively. To find the thermal comfort properties of the six bi-layer knitted fabrics, an objective fabric test was carried out. The results showed that the bi-layer fabrics made from micro denier polyester, both in the inner and outer layers, exhibit better thermal comfort properties, thereby providing a higher level of comfort; hence, they are preferred for active sportswear. The water vapour permeability, air permeability, thermal resistance and thermal conductivity of the bi-layer knitted fabric made up of micro denier polyester as the outer and inner layer were found to be higher when compared to the other bi-layer structures. The results were discussed together with one – way ANOVA test results at a 0.05 significance level.
Przenoszenie wyczuwalnego i niewyczuwalnego potu jest ważnym czynnikiem zapewniającym komfort użytkowania wyrobu. Poprawa właściwości komfortu termicznego dzianin skutkuje uzyskaniem komfortu użytkowania wyrobu. W pracy zbadano właściwości komfortu termicznego sześciu dwuwarstwowych dzianin. Dzianiny dwuwarstwowe zostały wykonane z różnych kombinacji przędzy w warstwie wewnętrznej i zewnętrznej. Wybrane kombinacje przędzy to: przędza cięta poliestrowo-poliestrowa, przędza odcinkowa poliestrowo-bawełniana, bawełniano-bawełniana, polipropylenowo-bawełniana, mikro denierowy poliester-bawełna i mikro denierowy poliester-poliester odpowiednio dla warstwy wewnętrznej i zewnętrznej. Aby określić właściwości komfortu termicznego sześciu dwuwarstwowych dzianin, przeprowadzono obiektywne testy wyrobów. Wyniki pokazały, że dwuwarstwowe dzianiny wykonane z poliestru mikro denierowego, zarówno w warstwie wewnętrznej, jak i zewnętrznej, wykazują lepsze właściwości komfortu termicznego, zapewniając w ten sposób wyższy poziom komfortu; dlatego są preferowane w produkcji aktywnej odzieży sportowej. Stwierdzono, że przepuszczalność pary wodnej, przepuszczalność powietrza, opór cieplny i przewodność cieplna dzianiny dwuwarstwowej wykonanej z poliestru mikro denierowego jako warstwy zewnętrznej i wewnętrznej są wyższe w porównaniu z innymi strukturami dwuwarstwowymi. Wyniki przeanalizowano za pomoca testu ANOVA na poziomie istotności 0,05.
Źródło:
Fibres & Textiles in Eastern Europe; 2020, 5 (143); 50-55
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Jak zmniejszyć dyskomfort pracy w szczelnej odzieży ochronnej
Reducing discomfort of work in hermetic protective clothing
Autorzy:
Bartkowiak, G.
Błażejewski, D
Powiązania:
https://bibliotekanauki.pl/articles/179530.pdf
Data publikacji:
2003
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
odzież ochronna
komfort termiczny
materiały ochronne
protective clothing
thermal comfort
protective materials
Opis:
Szczelna (barierowa) odzież ochronna jest bardzo często źródłem obciążenia cieplnego jej użytkownika, gdyż utrudnia odprowadzanie potu i wymianę ciepła oraz pary wodnej między ciałem i otoczeniem. Dyskomfort pracy w szczelnej odzieży ochronnej można w znacznym stopniu ograniczyć poprzez stosowanie pod nią odpowiedniej odzieży podbarierowej. Najlepsze właściwości pod względem kształtowania korzystnego mikroklimatu przy skórze użytkownika wykazuje odzież podbarierowa, wykonana z dwuwarstwowej dzianiny poliestrowo-wiskozowej.
Hermetic (barrier) protective clothing often puts a considerable thermal strain on the user`s body. This is due to the limited possibility of eliminating secreted sweat and heat generated by the body. It is possible to reduce the discomfort associated with work in hermetic protective clothing by using specially designed underbarrier clothing (undergarments) worn under hermetic protective clothing. Underbarrier clothing made of two-layer polyester/viscose knitting material has the best properties regarding shaping a proper microclimate near the user`s skin.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2003, 2; 23-24
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperatura jako istotny składnik środowiska pracy – wybrane aspekty
Temperature as an important factor in the work environment - selected aspects
Autorzy:
Piechowicz, B.
Stawarczyk, K.
Stawarczyk, M.
Piechowicz, I.
Powiązania:
https://bibliotekanauki.pl/articles/180193.pdf
Data publikacji:
2013
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
praca
temperatura
komfort termiczny
stres termiczny
wydajność
toksyczność
work
temperature
thermal comfort
thermal stress
performance
toxicity
Opis:
Fakt, że człowiek należy do organizmów stałocieplnych nie oznacza, że temperatura w miejscu przebywania nie wpływa na funkcjonowanie ludzkiego organizmu. Jest to ważne zwłaszcza w miejscu pracy, gdyż nieodpowiednie warunki termiczne mogą wpłynąć nie tylko na jej efektywność, ale również na bezpieczeństwo, a zwłaszcza na liczbę i następstwa wypadków przy pracy.
The fact that humans belong to warm-blooded organisms does not mean that the temperature in the place of their stay has no impact on the functioning on human body. This is important in particular. At the working site, where inappropriate thermal conditions may impact not only the effectiveness of work but also its safety and, in particular, the number and consequences of accidents at work.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2013, 7; 8-11
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of Thermal Comfort Properties of Different Kinds of Polyester Knitted Fabrics
Badanie właściwości komfortu termicznego różnych rodzajów dzianin poliestrowych
Autorzy:
Mohapatra, Shradhanjali
Vidya, T.
Kumar, D. Vasanth
Rajwin, A. Jebastin
Babu, V. Ramesh
Prakash, C.
Shah, B. Anas
Roy, Reetuparna
Powiązania:
https://bibliotekanauki.pl/articles/2056314.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
comfort
knitted fabric
microdenier polyester
polyester
single jersey
thermal comfort
komfort
dzianina
poliester microdenier
poliester
komfort termiczny
Opis:
This research focused on the thermal comfort behaviour of polyester with respect to the type of yarn (spun, micro denier, continuous filament and hollow), linear density of the yarn (111 and 166 dtex), and the loop length of knitted fabric (0.25, 0.27 and 0.29 cm).The air permeability of continuous filament yarn fabric and micro denier yarn knitted fabrics was noted to be higher than that of spun yarn knitted fabrics. 111 dtex micro denier yarn fabric has the highest air permeability and 111 dtex spun yarn fabric the lowest air permeability value among all the other fabric samples. Comparatively, coarser spun yarn fabric has lower air permeability characteristics than finer microdenier fabric.The water permeability of the fabric shows a significant difference between the spun yarn, continuous filament yarn and Micro denier yarn knitted fabrics and between the linear density of the yarn. The water vapour permeability of spun yarn of 166 dtex single jersey fabric is higher, while the water vapour permeability of continuous filament yarn fabric of 166 dtex is lower. The thermal conductivity value is high for continuous filament polyester fabric of 100 D and low for microdenier polyester fabric of 166 dtex. Based on the statistical analysis, it is clearly shown that there are significant differences between the three different polyester yarn fabrics of two different denier of the same fabric. Furthermore, the count and different polyester yarn affect the comfort properties of single jersey fabrics.
Badania koncentrowały się na zachowaniu komfortu cieplnego poliestru w odniesieniu do rodzaju przędzy, gęstości liniowej przędzy (111 dtex i 166 dtex) oraz długości pętelki dzianiny (0,25 cm, 0,27 cm oraz 0,29 cm). Zbadano właściwości wytworzonych dzianin takie jak: przepuszczalność powietrza, wody, pary wodnej oraz przewodność cieplną, a wyniki poddano analizie statystycznej.
Źródło:
Fibres & Textiles in Eastern Europe; 2021, 5 (149); 50--55
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal comfort assessment in the modern passenger car under actual operational conditions
Autorzy:
Dębska, Luiza
Krawczyk, Natalia
Powiązania:
https://bibliotekanauki.pl/articles/23966925.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
rzeczywiste warunki eksploatacyjne
komfort termiczny
samochód osobowy
thermal comfort
passenger car
actual operating conditions
Opis:
People’s ever-increasing needs encourage designers of various vehicles to search for solutions that will provide the most comfortable internal environment conditions. Currently, partly due to the COVID-19 threat, many people use their individual cars to travel to work, college, shops, trips, and holidays. Proper internal air parameters that need to be maintained in vehicles are critical in the sum-mer. The article discusses the thermal comfort of four passengers of a modern car produced in 2017to verify if contemporary production technology can successfully meet the thermal needs of people under actual conditions in the Polish climate. For this purpose, five temperature values were tested:20oC, 22oC, 24oC, 26oC, and 28oC for the car located in the shade and sun. In addition, the Testo 400meter was used to control and measure the internal parameters, and questionnaires were used to find out about the thermal impressions of the respondents. The research was carried out in July when the air temperature in Poland was high
Źródło:
Production Engineering Archives; 2023, 29, 2; 140--146
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie manekinów termicznych do badania komfortu cieplnego człowieka
The use of thermal manikins to study human thermal comfort
Autorzy:
Marszałek, A.
Powiązania:
https://bibliotekanauki.pl/articles/179885.pdf
Data publikacji:
2002
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
odzież ochronna
środki ochrony indywidualnej
komfort termiczny
manekin termiczny
protective clothing
personal protective equipment
thermal comfort
thermal manikin
Opis:
W artykule omówiono podstawowe rodzaje manekinów termicznych i przykładowe ich zastosowania m.in. w sporcie i rekreacji, do badania palności odzieży, do oceny klimatu pomieszczeń, w tym także w pojazdach. Wskazano kierunki rozwoju konstrukcji manekinów termicznych, w najnowszej generacji istnieje możliwość matematycznego modelowania komfortu cieplnego człowieka w różnych warunkach środowiska.
Basic kinds of thermal manikins and their hypothetical applications are presented; for instance in sport and recreation, for studying flammability of clothing, for assessing indoor climate, including that in vehicles. Directions in the development of the construction of manikins are presented. In their latest generation, it is possible to mathematically model human thermal comfort in different environmental conditions.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2002, 10; 26-29
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal comfort in intelligent buildings
Komfort cieplny w budynkach inteligentnych
Autorzy:
Majewski, G.
Telejko, M.
Powiązania:
https://bibliotekanauki.pl/articles/402098.pdf
Data publikacji:
2016
Wydawca:
Politechnika Świętokrzyska w Kielcach. Wydawnictwo PŚw
Tematy:
smart building
thermal comfort
indoor air quality
inteligentny budynek
komfort termiczny
jakość powietrza w pomieszczeniach
Opis:
The paper presents the issue of thermal comfort conditions with regard to intelligent buildings. First the principles of thermal comfort are discussed, namely the parameters affecting the human perception of the best indoor air conditions. Among the mentioned parameters indoor temperature seems to be especially vital for humans. In the second part the test results of temperature changes in the Energis building are presented together with the discussion.
Źródło:
Structure and Environment; 2016, 8, 1; 25-30
2081-1500
Pojawia się w:
Structure and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Sensations of Surgeons During Work in Surgical Gowns
Autorzy:
Zwolińska, M.
Bogdan, A.
Powiązania:
https://bibliotekanauki.pl/articles/90288.pdf
Data publikacji:
2013
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
thermal sensation
thermal comfort
surgical gowns
odzież robocza
personel służby zdrowia
komfort termiczny
ubranie chirurgiczne
Opis:
Standards for surgical procedures and medical clothing, designed for use in the operating theatre, have been gradually developed with the progress in science and technology. Standard No. EN 13795:2011, determining the requirements concerning materials for production of surgical gowns, was introduced in 2003. It concerns, e.g., resistance to microbial penetration. Little attention is given to thermal comfort, even though it is well known that thermal discomfort can have an adverse effect on the quality and efficiency of work. During a real-life test and laboratory tests, 2 male surgeons and 8 male volunteers were asked to describe their subjective sensations before and after work. The results of the real-life test and the laboratory tests are comparable. They show a clear lack of thermal comfort when medical clothing designed for the operating theatre is used.
Źródło:
International Journal of Occupational Safety and Ergonomics; 2013, 19, 3; 443-453
1080-3548
Pojawia się w:
International Journal of Occupational Safety and Ergonomics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Termoizolacyjność obuwia przeznaczonego do pracy w niskiej temperaturze
Autorzy:
Andrzejewska, A.
Kamińska, W.
Powiązania:
https://bibliotekanauki.pl/articles/181457.pdf
Data publikacji:
2000
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
środki ochrony indywidualnej
obuwie ochronne
komfort termiczny
termoizolacyjność
personal protective equipment
protective footwear
thermal comfort
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2000, 4; 23-25
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wytrząśnij z siebie dreszcze: komfort termiczny w strefach buforowych
Shake your shakes off: thermal comfort in buffer zones
Autorzy:
Lechowska, W.
Powiązania:
https://bibliotekanauki.pl/articles/293976.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
strefa buforowa
komfort termiczny
bilans energetyczny
odczuwanie temperatury
buffer zone
thermal comfort
energy balance
thermic sensation
Opis:
W niniejszym artykule zaprezentowano metodę umożliwiającą ocenę komfortu termicznego w pomieszczeniach funkcjonujących jako termiczne strefy buforowe. Zaproponowano scenariusz gry oraz prototyp pozwalający na symulowanie zmian warunków termicznych w budynku, zachodzących pod wpływem informacji wprowadzanych do modelu przez gracza. Zaprojektowany algorytm umożliwia różne działania gracza, takie jak definiowanie kształtu i wielkości budynku, ustawianie jednego bądź wielu graczy, dla których budynek musiałby być zoptymalizowany pod kątem różnych potrzeb, a także określanie aktywności fizycznej wpływającej na metabolizm mieszkańca – tym samym na odczuwanie przez niego temperatury. Pozwala on również na prowadzenie symulacji różnych pór dnia i roku. Symulacje w programie Design Builder Energy Plus prowadzone na prototypowym modelu budynku skupiają się na zmianach czasu, przestrzeni oraz energii w teoretycznym budynku, zlokalizowanym we Wrocławiu. Ich głównym celem było określenie najlepszych ustawień dla strefy buforowej, tak aby możliwe było przebywanie w niej w najcieplejsze i najchłodniejsze dni w roku bez potrzeby dodatkowego chłodzenia czy ogrzewania tego pomieszczenia. W artykule przedstawiono proponowane ulepszenia dla strefy oraz kryteria oceny komfortu termicznego i zadowolenia użytkowników pomieszczenia.
This article presents a methodology for assessing thermal comfort in building’s adjacent spaces, which may function as buffer zones. The game scenario and prototype model were proposed as the result of the research project. This prototype allows conducting simulations of the changes introduced by the player to the building’s model and consequences in the building’s thermal conditions. The created game algorithm includes the player’s actions, such as defining geometry, volume and openings in the building’s model; setting preferences (one or a multi player, members of the family) and describing the activity (metabolic rate). The algorithm also includes loops with additional changes, namely time of day and seasons, construction and insulation materials, small heat gains sources, virtual partitions, etc. Prototype analyses, conducted in Design Builder Energy Plus program, were focused on altering time, material, spatial, and energy settings in a theoretical building, located in Wrocław. The main aim of these simulations was to define best settings for the buffer zone, so that it will be possible to spend time there in the hottest week in summer and the coldest in winter. The project description also includes projected improvements and evaluation criteria for satisfying thermal comfort and happiness of the inhabitants.
Źródło:
Architectus; 2017, 4 (52); 33-48
1429-7507
2084-5227
Pojawia się w:
Architectus
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal Comfort Properties of a Bi-layer Knitted Fabric Structure for Volleyball Sportswear
Komfort cieplny dwuwarstwowych dzianin przeznaczonych na odzież sportową dla siatkarzy
Autorzy:
Suganthi, T.
Senthilkumar, P.
Dipika, V.
Powiązania:
https://bibliotekanauki.pl/articles/232128.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
bi-layer
performance
sports wear
thermal comfort
subjective analysis
wydajność
odzież sportowa
komfort termiczny
analiza subiektywna
Opis:
The thermal comfort properties of different knitted fabric structures made from modal, polypropylene and micro denier polyester were studied for volleyball sportswear. Eleven knitted fabrics were produced, in which three samples were single jersey, two plated and six bi-layer knitted structures. The air permeability, water vapour permeability, thermal conductivity, wicking and drying ability of bi-layer knitted fabric made up of polypropylene as the inner layer and modal as the outer layer with one tuck point of repeat were found to be higher as compared to other bi-layer, plated and single jersey structures. Both theobjective and subjective results show that bi-layer knitted fabric with polypropylene as the inner layer and modal as the outer layer with one tuck point of repeat is mostly suitablefor sportswear. The results are discussed together with multivariate ANOVA test results ata 95% significance level.
Badano komfort cieplny różnych struktur dzianin wykonanych z włókien modalnych, polipropylenowych i mikrowłókien poliestrowych przeznaczonych na odzież sportową dla siatkarzy. Wytworzono jedenaście rodzajów dzianin, spośród których trzy miały splot lewo-prawy, dwie były platerowane, a sześć miało strukturę dwuwarstwową. Przepuszczalność powietrza i pary wodnej, przewodnictwo cieplne, zwilżalność („wicking”) i zdolność suszenia dwuwarstwowej dzianiny wykonanej z polipropylenowej warstwy wewnętrznej i zewnętrznej warstwy wykonanej z włókien modalnych okazały się najlepsze. Wyniki zostały poddane analizie statystycznej ANOVA przy 95% poziomie istotności.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 1 (121); 75-80
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania właściwości termoizolacyjnych tkanin odzieżowych
Measurements of thermal insulation properties of fabrics
Autorzy:
Matusiak, M.
Powiązania:
https://bibliotekanauki.pl/articles/152636.pdf
Data publikacji:
2010
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
komfort termiczny
opór termiczny
tkaniny
pomiary
Permetest
Alambeta
Thermo Labo II
thermal comfort
thermal resistance
woven fabrics
measurement
Thermo-Labo II
Opis:
Istnieje wiele metod i przyrządów do oceny termoizolacyjności materiałów włókienniczych. W referacie przedstawiono wyniki badań za pomocą: "modelu skóry", Alambety, Thermo Labo II i Permetesu właściwości termoizolacyjnych tkanin odzieżowych o programowo zróżnicowanej strukturze. Omówiono zasady działania poszczególnych przyrządów oraz przeprowadzono analizę porównawczą wyników otrzymywanych za pomocą ww. przyrządów pomiarowych.
Thermal comfort is an outcome of many factors connected with the human body, climatic conditions of environment and clothing, which is a barrier protecting the human organism against a negative influence of external factors. The influence of the clothing on the heat exchange between the human body and surroundings is very complicated. It depends on many factors such as: air temperature, air movement and humidity. No less important role is played by the raw material as well as the micro- and macrostructure of clothing. There are a lot of properties characterizing the thermal insulation of fabrics. Thermal resistance, water-vapor resistance and air permeability are considered as the most important comfort-related properties of fabrics. Thermal insulation properties of textiles can be assessed by different measurement devices. Sweating guarded - hot plate test (Fig. 1) is commonly known and applied in practice. The method is standardized in Polish Standard [1]. Other devices: Alambeta (Fig. 2), Thermo Labo II and Permetest (Fig. 3) are relatively new and their application is not widespread up till now. In the presented work the measurement of fabrics was taken by means of the sweating guarded hot plate test, Alambeta, Thermo Labo II and Permetest. The woven fabrics of the intentionally changed structure were an object of the investigation. The comparison of the results obtained from the used testing devices was performed in order to assess the agreement between the readings from all instruments (Figs. 4-6).
Źródło:
Pomiary Automatyka Kontrola; 2010, R. 56, nr 8, 8; 901-904
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of the Bamboo/Cotton Fibre Blend Proportion on the Thermal Comfort Properties of Single Jersey Knitted Fabrics
Wpływ proporcji mieszanki bambus/bawełna na komfort cieplny dzianin
Autorzy:
Kadapalayam Chinnasamy, K.
Chidambaram, P.
Powiązania:
https://bibliotekanauki.pl/articles/234304.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Biopolimerów i Włókien Chemicznych
Tematy:
regenerated bamboo
blend ratio
cotton
linear density
thermal comfort
knitted fabrics
zregenerowany bambus
stosunek mieszanki
bawełna
gęstość liniowa
komfort termiczny
dzianiny
Opis:
The main aim was to find out the influence of the blend ratio and linear density on the thermal comfort properties of regenerated bamboo cotton blended single jersey knitted fabrics. An increase in the regenerated bamboo fibre ratio in the fabric influences the thermal comfort properties. Knitted fabrics prepared from regenerated bamboo blended yarns have lesser thickness and inferior mass per square meter than cotton fabrics. The proportion of regenerated bamboo fibre increases in the yarn as the value of thermal conductivity decreases in knitted fabrics. Water vapour permeability and air permeability confirm a similar increase as the proportion of regenerated bamboo fibre increases. 100% regenerated bamboo fabrics have superior air permeability values compared with regenerated bamboo/cotton blended fabrics. The statistical investigation also showed that the results are significant for the thermal comfort properties of regenerated bamboo cotton knitted fabrics.
Głównym celem pracy było poznanie wpływu współczynnika mieszania i gęstości liniowej przędz składowych na komfort cieplny dzianin bambusowo-bawełnianych. Zbadano właściwości komfortu cieplnego dzianin wykonanych w 100% z bawełny, w 100% z regenerowanego bambusa i dzianin mieszanych bambus/bawełna. Stwierdzono, że dzianina bambusowa ma najwyższą przepuszczalność powietrza i względną przepuszczalność pary wodnej. Powyższe wskaźniki są za to najniższe w przypadku wyrobów wykonanych z bawełny. Dzianiny bambusowe mają za to niższe od dzianin bawełnianych przewodnictwo cieplne. Zwiększenie stosunku zregenerowanego włókna bambusowego w wyrobie wpływa na jego komfort termiczny. Dzianiny bambusowe mają lepszą przepuszczalność powietrza w porównaniu z wyrobami mieszanymi bambus/bawełna.
Źródło:
Fibres & Textiles in Eastern Europe; 2017, 6 (126); 53-57
1230-3666
2300-7354
Pojawia się w:
Fibres & Textiles in Eastern Europe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Underground Spaces: a Step Towards Sustainable Development in Khuzestan Province, Iran
Wykorzystanie podziemi: krok w kierunku zrównoważonego rozwoju w prowincji Chuzestan w Iranie
Autorzy:
Ghaedi, Sohrab
Powiązania:
https://bibliotekanauki.pl/articles/1840980.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Komitet Człowiek i Środowisko PAN
Tematy:
underground space
temperature fluctuation
soil depth temperature
comfort thermal
Khuzestan province
podziemia
zmiany temperatury
temperatura głębi ziemi
komfort termiczny
prowincja Khuzestan
Opis:
Reducing the consumption of fossil fuels using underground spaces has a significant impact on the economic, social and environmental dimensions of sustainable development. In this study, the soil layers temperature and thermal comfort in these layers were investigated to make the underground spaces in Khuzestan province. The average summer temperature in the central of Province is about 38°C, which is far from the comfort of the temperature. The surface annual temperature fluctuation in the Province varies from 23.5 in the north of the province to 28.5 °C in the southeast. Investigating the temperature fluctuation in the soil layers shows that it decreases with increasing depth, so that at a depth of 10 meters, the temperature fluctuation is approximately zero and it is equal to the annual average temperature. Therefore to 10 m depth, temperature fluctuation decreases by increasing the depth. The use of underground spaces in the Province can be taken in coping with heat and extreme sunlight, reducing energy and controlling dust and has positive effect on economic, social and environmental dimensions of sustainable development.
Zmniejszenie zużycia paliw kopalnych z wykorzystaniem przestrzeni podziemnych ma znaczący wpływ na wymiar gospodarczy, społeczny i środowiskowy zrównoważonego rozwoju. W tym badaniu zbadano temperaturę i komfort cieplny warstw gleby w tych warstwach, aby stworzyć podziemne przestrzenie w prowincji Chuzestan. Średnia temperatura latem w centralnej części prowincji wynosi około 38 ° C, co jest dalekie od komfortowej temperatury. Roczne wahania temperatury powierzchniowej w prowincji wahają się od 23,5 °C na północy prowincji do 28,5 °C na południowym wschodzie. Badanie wahań temperatury w warstwach gleby wykazało, że zmniejsza się ona wraz ze wzrostem głębokości, tak że na głębokości 10 metrów wahania temperatury są w przybliżeniu zerowe i są równe średniej temperaturze rocznej. Dlatego do głębokości 10 m wraz z rosnącą głębokością zmniejszają się wahania temperatury. Wykorzystanie przestrzeni podziemnych w tej prowincji może być wykorzystane do walki z upałem i ekstremalnym nasłonecznieniem, ograniczania zużycia energii i kontrolowania zapylenia oraz ma pozytywny wpływ na wymiar ekonomiczny, społeczny i środowiskowy zrównoważonego rozwoju.
Źródło:
Problemy Ekorozwoju; 2021, 16, 1; 193-200
1895-6912
Pojawia się w:
Problemy Ekorozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the use of sorption and evaporative cooling as part of the preparation of ventilation air for Polish climatic conditions
Autorzy:
Rzążewski, Mikołaj
Grzebielec, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/2195739.pdf
Data publikacji:
2021
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
DEC
SDEC
sorption cooling system
evaporative cooling
solar cooling
alternative ways of cooling
ventilation air
thermal comfort
system chłodzenia sorpcyjnego
chłodzenie wyparne
chłodzenie słoneczne
alternatywne sposoby chłodzenia
powietrze wentylacyjne
komfort termiczny
Opis:
In this paper, the possibility of use of a DEC type air conditioning system, using solar energy, in Polish climatic conditions Polish, as an alternative to traditional systems based on compressor refrigeration equipment, was analyzed. At the beginning of the work, attention was paid to how important it is for users to maintain thermal comfort conditions and how these conditions can be determined. It also shows why the DEC system can be a good solution for the cases under consideration. In the next part of the paper, the analyzed system is described, presenting the individual processes of humid air transformation taking place in it, in which devices these processes can take place and how they were modeled in further calculations. Modeling the operation of the DEC system was based mainly on determining the efficiency of individual devices, i.e. the effectiveness of the processes taking place in them and the use of a psychometric graph. Similarly, the method of calculating the useful heat that can be obtained from solar collectors under known conditions is presented. For this purpose, meteorological data and the theory of similarity in heat transfer were used. In the next part of the work, an example of a calculation cycle was presented, along with the next steps of applying to the psychometric graph points corresponding to the states of moist air at individual points of the DEC system. On the basis of such calculation cycles, performed for different values of outdoor air parameters, the relationships of the obtained cooling power, the power supplied for adsorber regeneration, EER, temperature and relative humidity of the supply air to rooms, from the temperature and relative humidity of the outside air. Next, the calculation process for determining the useful heat obtained from solar collectors is presented. On the basis of several such processes, the average conditions of heat collection from the collector were determined, on the basis of which the amount of energy obtained from solar radiation was determined on the scale of the entire summer period. On the basis of this analysis, surpluses and shortages of energy obtained from collectors on individual days of the considered period were determined. In conclusion, it was stated that despite the fairly good cooperation of the system with solar collectors and its simple construction, the DEC system cannot be an alternative to compressor refrigeration equipment. This is mainly due to the unfavorable level of relative humidity in Polish climatic conditions, which does not allow the device to achieve the appropriate temperature of the air supplied to the rooms.
Źródło:
Modern Engineering; 2021, 1; 22--35
2450-5501
Pojawia się w:
Modern Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ temperatury środowiska zewnętrznego na sprawność działania człowieka
The influence of thermal stress on mans physical performance
Autorzy:
Sudoł-Szopińska, I.
Łuczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/180482.pdf
Data publikacji:
2006
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
stres termiczny
komfort cieplny
thermal stress
thermal comfort
Opis:
Stres termiczny, będący integralnym elementem pracy w wielu sytuacjach życia zawodowego i pozazawodowego, ma istotny wpływ na sprawność i bezpieczeństwo działania człowieka. W artykule przedstawiono procesy fizjologiczne oraz sprawności i funkcje poznawcze, których poziom ulega istotnemu obniżeniu w warunkach stresu termicznego, jak również czynniki indywidualne i środowiskowe mające znaczenie w relacji stres termiczny - sprawność człowieka. Szczególną sytuacją, zwłaszcza w sezonie letnim, narażenia na mikroklimat gorący jest stosowanie kasku ochronnego, np. motocyklowego, który mimo niepodważalnej roli w zakresie ochrony głowy przed urazami mechanicznymi, może mieć niekorzystny wpływ na szereg procesów poznawczych motocyklisty, z uwagi na tworzące się w przestrzeni pod kaskiem gorące środowisko. W artykule omówiono więc także szczególną rolę głowy w procesie wymiany ciepła między człowiekiem i otoczeniem, podkreślając przy tym znaczenie badań nad wpływem różnych elementów odzieży ochronnej, w tym kasków, m.in. systemów ich chłodzenia, na komfort i bezpieczeństwo człowieka w warunkach stresu termicznego.
Thermal stress, an integral element of work in both professional and non-professional life, has a vital influence on man's physical performance and safety. This article presents physiological as well as cognitive functions and capacities, which decrease considerably under thermal stress, as well as individual and physiological factors, which play a significant role in the relationship between thermal stress and human performance. The use of a protective helmet (for instance, a motorcycle helmet) brings about exposure to a hot microclimate, especially in summer. Admittedly, its role in protecting the head against mechanical trauma is unquestionable; nonetheless due to the hot microclimate generated in the space under the motorcyclists helmet, it can have a negative influence on a number of cognitive processes. The article also discusses the special role the head plays in the process of heat exchange between man and the environment. It emphasizes the significance of research on the impact of various elements of protective clothing (including helmets) and, e. g., their cooling systems on comfort and safety of man under thermal stress.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2006, 7/8; 16-19
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena komfortu biofizycznego kreowanego przez tekstylia z zastosowaniem pocącej się, zaizolowanej cieplnie płyty i manekina termicznego
Assessment of biophysical comfort created by textiles using sweeting, thermally insulated hot plate and thermal manikin
Autorzy:
Komisarczyk, A.
Sroka, K.
Krucińska, I.
Powiązania:
https://bibliotekanauki.pl/articles/268234.pdf
Data publikacji:
2018
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
komfort biofizyczny
Manekin termiczny
"model skóry"
biophysical comfort
thermal manikin
hot–plate
Opis:
Uwzględniając obecny rozwój inżynierii materiałowej, również w obszarze włókiennictwa, dostępność zróżnicowanych pod względem właściwości pakietów odzieżowych oraz rozwijające się zapotrzebowanie na odzież specjalnego przeznaczenia, pojawia się konieczność oceny komfortu biofizycznego kreowanego przez te wyroby. Ocena taka jest prowadzona na różnych etapach projektowania i produkcji. Niniejsza publikacja prezentuje porównanie wartości oporu cieplnego dla tkanin oraz izolacyjności cieplnej odzieży wytworzonej z tych tkanin. Tkaniny badano stosując metodykę zapisaną w normie PN-EN ISO 11092:2014-11, z wykorzystaniem metody pocącej się zaizolowanej cieplnie płyty, zaś ocenę izolacyjności cieplnej prowadzono w oparciu o normę PN-EN ISO 15831:2006 z zastosowaniem manekina termicznego NEWTON.
Taking into account the current development of materials engineering, also in the field of textile industry, the availability of clothing packages with different properties in terms of properties and the growing demand for special-purpose clothing, there is a need to assess the biophysical comfort created by these products. This assessment is carried out at various stages of design and production. This publication presents a comparison of thermal resistance values for fabrics and thermal insulation of clothing made from these fabrics. The fabrics were tested using the methodology described in the PN-EN ISO 11092: 2014-11 standard, using the method of a heat-insulated thermal plate, and the assessment of thermal insulation was based on the PN-EN ISO 15831: 2006 standard using the NEWTON thermal manikin. Presented tests were done using three woven fabrics, differentiated by surface mass and the male shirts made from these wovens. Obtained results independently on similarities between measurements shows no correlation. It is assumed that the reason for the lack of correlation is the varied adaptation of the samples to the measurement system that occurs in both tests. This work is the introduction to further research.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2018, 59; 93-96
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Termiczny model stopy - próba aplikacji w badaniach obuwia ochronnego
Thermal foot model - an attempt of applications in studies of protective footwear
Autorzy:
Irzmańska, E.
Powiązania:
https://bibliotekanauki.pl/articles/155866.pdf
Data publikacji:
2012
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
termiczny model stopy
obuwie ochronne
komfort użytkowania
thermal foot model
protective footwear
usage comfort
Opis:
Artykuł prezentuje opis dotychczas stosowanych metod w ocenie komfortu użytkowania obuwia ochronnego z uwzględnieniem modelu sztucznej stopy. Opisano postęp jaki dokonał się od lat 30-tych 20 wieku w zakresie poziomu technicznego ich konstrukcji na podstawie danych literaturowych. Podkreślono zalety wykonywania badań komfortu użytkowania z wykorzystaniem termicznego modelu stopy oraz zwrócono uwagę, że wyniki mogą być szeroko wykorzystywane zarówno w badaniach naukowych jak i przez producentów obuwia do szybkiej jego weryfikacji na etapie projektowania. W publikacji wskazano kierunki technicznego rozwoju modeli ii aplikacji badawczych.
Description of existing methods in evaluation of protective footwear comfort including the thermal foot model is presented in the paper. The progress made throughout the 30-ties XX century in the technical level of their design on the basis of literature data is described. Starting with the first model developed in Primasens in the 80-ties the models currently under development are overvieved. The paper broadly describes the first study in the protective shoe conducted at Lund University since 1999. Advantages of comfort testing using a thermal foot model of the rate were emphasized and it was noted that the results can be widely used in both research and footwear manufacture to assess fast the microclimate parameters in the shoe at the stage of the design. Future directions in terms of their technical development and research opportunities are also identified in the paper. Seven years lasting the standardization work concerning to attempts to include to the series ISO standards the insulating protective footwear properties study and methods of their determination by means of the thermal foot model are also presented.
Źródło:
Pomiary Automatyka Kontrola; 2012, R. 58, nr 12, 12; 1076-1081
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of the Ansys Fluent program for modelling environmental phenomena in a living room
Autorzy:
Kosiń, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2174974.pdf
Data publikacji:
2021
Wydawca:
Politechnika Częstochowska
Tematy:
modelowanie numeryczne
CFD
rozkład termiczny
rozkład wilgotności
komfort cieplny
rozkład temperatury
numerical modeling
thermal distribution
humidity distribution
thermal comfort
temperature distribution
Opis:
The article presents a three-dimensional numerical analysis of heat and humidity parameters carried out for a living room in a multi-family building. The aim of the analysis was to compare alternative heating methods with the existing one. Two cases were included in the analysis: case I - the existing state, case II - the existing state with an additional panel heater. In order to verify the numerical analysis for case I, the temperature and relative humidity were measured. During the heating period, the thermal conditions in the room did not favor the comfort of users, especially in one part of the room. The study may be a tool for future research related to the implementation of the climatic conditions of rooms with similar structural and functional features.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2021, 10, 2; 53--59
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of human thermal comfort and heat stress in an outdoor urban setting in summer under arid climatic conditions
Autorzy:
Abdel-Ghany, A. M.
Al-Helal, I. M.
Shady, M. R.
Powiązania:
https://bibliotekanauki.pl/articles/950038.pdf
Data publikacji:
2014
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
arid regions
sensory perception
thermal comfort
climatic conditions
effective temperature
human thermal comfort
solar-radiation fluxes
thermal stress
heat stress
suchy klimat
percepcja sensoryczna
komfort cieplny
warunki klimatyczne
temperatura efektywna
komfort cieplny człowieka
strumienie promieniowania słonecznego
stres termiczny
stres cieplny
Opis:
Thermal sensation and heat stress potential were evaluated in summer in an outdoor arid environment. Such evaluation had never been made in arid regions. Various scales: the temperaturehumidity index (THI), physiological effective temperature (PET), universal thermal climatic index (UTCI) and standard effective temperature (SET*) were used for the evaluation. RayMan software model was used to estimate the PET and SET* and the UTCI-calculator was used for UTCI. The required air dry and wet bulb temperatures (Td, Tw), solar radiation flux (S0) and wind speed (V) were measured in summer (April 29–July 15). The results showed that: Persons are exposed to strong heat stress and would feel very hot most of the day time; and they are safe from heat stress risk and would feel comfortable most of the night time. Heat stress levels can be determined using the PET or UTCI scales; both are valid for arid environment and their results are almost similar; however, the THI cannot be used. SET* index specifically describes the thermal sensations and discomfort conditions along with summer days at any activity under arid conditions.
Źródło:
Environment Protection Engineering; 2014, 40, 3; 139-150
0324-8828
Pojawia się w:
Environment Protection Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-23 z 23

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies