Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "knock onset" wg kryterium: Temat


Wyświetlanie 1-2 z 2
Tytuł:
Multidimensional simulation of combustion and knock onset in gas engines
Autorzy:
Tatschl, R.
Priesching, P.
Schneider, J.
Powiązania:
https://bibliotekanauki.pl/articles/245656.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
gas engines
simulation
combustion
efficiency
knock onset
Opis:
Natural gas fuelled internal combustion engines enable efficient energy conversion with relatively low environmental impact. Depending on the specific application, the available fuel quality, and the emission regulations to be fulfilled, different types of gas-engine combustion systems are in use. The major performance and hence efficiency limiting factors in gas fuelled engines are related to the lower ignitability of natural gas at part load and the appearance of abnormal combustion (knock) at high load conditions. This article provides an overview of the multidimensional CFD simulation workflow for the investigation and assessment of flame propagation and knock onset characteristics in different types of natural gas fuelled internal combustion engines. The most common approaches for simulating flame propagation/combustion under engine conditions are presented together with selected models for describing the pre-flame reactions finally leading to knock onset in the unburned in-cylinder charge ahead of the flame. Based on selected application examples, the models’ performance and capabilities with respect to reflecting the essential characteristics of flame propagation and knock onset are presented.
Źródło:
Journal of KONES; 2018, 25, 2; 379-389
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of knock suppression characteristics in a boosted methane : gasoline blended fuelled SI engine
Autorzy:
Yang, Z.
Miganakallu, N.
Rao, S.
Harsulkar, J.
Naber, J.
Lonari, Y.
Szwaja, S.
Powiązania:
https://bibliotekanauki.pl/articles/244629.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
knock
methane
gasoline
E10
blend fuel
knock onset prediction
simulation
Opis:
Natural gas has a higher knock suppression effect than gasoline which makes it possible to operate at higher compression ratio and higher loads resulting in increased thermal efficiency in a spark ignition engine However, using port fuel injected natural gas instead of gasoline reduces the volumetric efficiency from the standpoints of the charge displacement of the gaseous fuel and the charge cooling that occurs from liquid fuels. This article investigates the combustion and engine performance characteristics by utilizing experimental and simulation methods varying the natural gas-gasoline blending ratio at constant engine speed, load, and knock level. The experimental tests were conducted on a single cylinder prototype spark ignited engine equipped with two fuel systems: (i) a Direct Injection system for gasoline and (ii) a Port Fuel Injection (PFI) system for compressed natural gas. For the fuels, gasoline with 10% ethanol by volume (commercially known as E10) with a research octane number of 91.7 is used for gasoline via the DI system, while methane is injected through PFI system. The knock suppression tests were conducted at 1500 rpm, 12 bar net indicated mean effective pressure wherein the engine was boosted using compressed air. At 60% of blending methane with E10 gasoline, the results show high knock suppression. The net indicated specific fuel consumption is 7% lower, but the volumetric efficiency is 7% lower compared to E10 gasoline only condition. A knock prediction model was calibrated in the 1-D simulation software GT-Power by Gamma Technologies. The calibration was conducted by correlating the simulated engine knock onset with the experimental results. The simulation results show its capability to predict knock onset at various fuel blending ratios.
Źródło:
Journal of KONES; 2018, 25, 3; 517-525
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies