Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

English (EN)·Polski (PL)·Yкраїнський (UK)
Przejdź do strony domowej biblioteki Centralna Biblioteka Wojskowa Link otwiera się w nowym oknie Logo biblioteki Prolib Integro - strona głównaCentralna Biblioteka Wojskowa

Wyszukujesz frazę "iron foundry" wg kryterium: Temat

  Lista filtrów
Wyrównaj
Wyświetlanie 1-15 z 28
Tytuł:
The Effect of Reclaim Primary Quality on Moulding Sand Parameters and Quality of Ductile Iron Casting Surface Layer
Autorzy:
Kamińska, Jadwiga
Angrecki, M.
Puzio, S.
Stachowicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/2134210.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry industry
furfuryl resin
reclaim
self-hardening moulding sand
surface quality
ductile iron
przemysł odlewniczy
żywica furfurylowa
masa formierska
masa samoutwardzalna
jakość powierzchni
odlew z żeliwa sferoidalnego
Opis:
The aim of the research was to determine the effect of the primary quality of reclaim from dry mechanical reclamation on the strength properties and service life of moulding sands based on this reclaim. Another aim was to establish the effect of the quality of reclaim, sulphur content - in particular, on the surface quality and thickness of the deformed surface layer in ductile iron castings. The research has revealed differences in the strength parameters and service life (mouldability) of sands based on the tested reclaims, depending on the type of the furfuryl resin used, including resins whose synthesis was done as part of the Żywfur project. Examinations of the structure of the surface layer of test castings poured in moulds made of loose self-hardening sands containing the addition of reclaim have confirmed the occurrence of degenerated spheroidal graphite in this part of the casting. It should be noted here that when massive castings with a long solidification time are made, the graphite degeneration effect can be more visible and the layer with the changed structure can increase in thickness. The research has clearly shown that it is necessary to control the parameters of the reclaim, including sulphur content which is transferred from the hardener and accumulates on the grains. This phenomenon has a negative impact not only on the sand strength and technological properties but also on the surface layer of castings.
Źródło:
Archives of Foundry Engineering; 2022, 22, 2; 83--88
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer Simulation of Cast Iron Flow in Castability Trials
Autorzy:
Popielarski, P.
Hajkowski, J.
Sika, R.
Ignaszak, Z.
Powiązania:
https://bibliotekanauki.pl/articles/355454.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
application of information technology to the foundry industry
castings defects
cast iron
castability trial
Opis:
The paper includes validation studies of the flow module of the NovaFlow&Solid simulation code. Experiments of ductile iron and gray iron casting in a spiral test of castability were carried out. Casting experiments were then carried out in industrial conditions in the Ferrex Foundry in Poznań and the results are the castability spiral length and local cast iron rate during mould cavity pouring. Simulation tests using NovaFlow&Solid Control Volume code were made. The technological castability test was used to determine thermal-physical data through simplified inversion problem. Influence of physical parameters in the database of simulation code on the spiral length obtained as the result of simulation was analyzed. It was found that critical fraction of capillary flow CLF down has the biggest impact on cast iron castability in the simulation code. The simulations resulted in defining parameters of gray iron GJL 250 and ductile iron GJS-400-15. For the parameters set, the length of castability spiral in simulations was in accordance with casting experiments.
Źródło:
Archives of Metallurgy and Materials; 2019, 64, 4; 1433-1439
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza bezpieczeństwa pracy w odlewni żeliwa na przykładzie wybranej odlewni żeliwa
Safety analysis of the job in iron foundry on the example of a selected iron foundry
Autorzy:
Wieliczka, B.
Powiązania:
https://bibliotekanauki.pl/articles/109043.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
bezpieczeństwo i higiena pracy
odlewania żeliwa
zalewacz piecowy
ocena ryzyka zawodowego
środki zapobiegawcze
Occupational Health and Safety
iron foundry
pourer
risk assessment
preventive measures
Opis:
Zdrowie i życie ludzkie jest najcenniejszą rzeczą jaką człowiek posiada, priorytet o który należy dbać nieustannie. W procesie produkcyjnym człowiek jest najistotniejszym elementem, jego bezpieczeństwo powinno być najważniejsze dla pracodawcy. Poprawa warunków środowiska pracy, które stwarzają zagrożenie dla pracownika powinny być cały czas minimalizowane tak aby nie stanowiły żadnego zagrożenia. W przypadku niemożności niwelizacji czynników szkodliwych, uciążliwych i niebezpiecznych do granicy minimalnej, z pomocą przychodzą środki ochrony indywidualnej. Środki te mają za zadanie chronić pracownika w sposób komfortowy co wynika z ich kompatybilności. Aby móc wykonać powyżej opisane działania, pierwszym krokiem jest identyfikacja zagrożeń występujących w przedsiębiorstwie wraz z przeprowadzeniem oceny ryzyka zawodowego. Podstawowym celem tego artykułu jest przedstawienie analizy bezpieczeństwa pracy w odlewni żeliwa na stanowisku zalewacza piecowego w oparciu o ocenę ryzyka zawodowego.
Health and human life is the most valuable thing a person has, a priority to be constantly looked after. In the production process, man is the most important element, its safety should be the most important for the employer. Improvement of working environment conditions that pose a threat to the employee should be minimized so as not to pose any threat. If it is not possible to eliminate harmful, arduous and dangerous factors up to the minimum limit, personal protection measures help. These measures are designed to protect the employee in a comfortable manner, which results from their compatibility. In order to be able to perform the above described activities, the first step is to identify hazards occurring in the enterprise along with carrying out a risk assessment. The main purpose of this article is to present an analysis of work safety in a cast iron foundry on a furnace pouring stand based on a risk assessment.
Źródło:
Archiwum Wiedzy Inżynierskiej; 2018, 3, 2; 26-29
2544-2449
Pojawia się w:
Archiwum Wiedzy Inżynierskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computer Catalog and Semantic Search of Data in the Domain of Cast Iron Processing
Autorzy:
Rojek, G.
Regulski, K.
Wilk-Kołodziejczyk, D.
Kluska-Nawarecka, S.
Wawrzaszek, T.
Powiązania:
https://bibliotekanauki.pl/articles/381770.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
application of information technologies
foundry
semantic search
ontology
cast iron processing
zastosowanie technologii informacyjnych
odlewnictwo
obróbka żeliwa
Opis:
The aim of this study is to design and implement a computer system, which will allow the semantic cataloging and data retrieval in the field of cast iron processing. The intention is to let the system architecture allow for consideration of data on various processing techniques based on the information available or searched by a potential user. This is achieved by separating the system code from the knowledge of the processing operations or from the chemical composition of the material being processed. This is made possible by the creation and subsequent use of formal knowledge representation in the form of ontology. So, any use of the system is associated with the use of ontologies, either as an aid for the cataloging of new data, or as an indication of restrictions imposed on the data which draw user attention. The use of formal knowledge representation also allows consideration of semantic meaning, a consequence of which may be, for example, returning all elements in subclasses of the searched process class or material grade.
Źródło:
Archives of Foundry Engineering; 2017, 17, 2; 79-84
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnosis of Missed Ductile Iron Melts with Process Modelling
Autorzy:
Perzyk, M.
Werlaty, M.
Powiązania:
https://bibliotekanauki.pl/articles/382916.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
quality management
information technology
foundry industry
process fault diagnosis
ductile iron melting
data driven model
zarządzanie jakością
technologia informacyjna
przemysł odlewniczy
diagnostyka uszkodzeń
topienie żeliwa
Opis:
The paper presents an application of advanced data-driven (soft) models in finding the most probable particular causes of missed ductile iron melts. The proposed methodology was tested using real foundry data set containing 1020 records with contents of 9 chemical elements in the iron as the process input variables and the ductile iron grade as the output. This dependent variable was of discrete (nominal) type with four possible values: ‘400/18’, ‘500/07’, ‘500/07 special’ and ‘non-classified’, i.e. the missed melt. Several types of classification models were built and tested: MLP-type Artificial Neural Network, Support Vector Machine and two versions of Classification Trees. The best accuracy of predictions was achieved by one of the Classification Tree model, which was then used in the simulations leading to conversion of the missed melts to the expected grades. Two strategies of changing the input values (chemical composition) were tried: content of a single element at a time and simultaneous changes of a selected pair of elements. It was found that in the vast majority of the missed melts the changes of single elements concentrations have led to the change from the non-classified iron to its expected grade. In the case of the three remaining melts the simultaneous changes of pairs of the elements’ concentrations appeared to be successful and that those cases were in agreement with foundry staff expertise. It is concluded that utilizing an advanced data-driven process model can significantly facilitate diagnosis of defective products and out-of-control foundry processes.
Źródło:
Archives of Foundry Engineering; 2017, 17, 4; 123-126
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Features of Cast Iron Smelting in Induction Crucible Furnaces
Autorzy:
Grachev, V.
Powiązania:
https://bibliotekanauki.pl/articles/381609.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative foundry materials
heat treatment
cast iron smelting
electric induction furnace
crucible
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
obróbka cieplna
hutnictwo żeliwa
piec indukcyjny
tygiel
Opis:
The article describes the trend towards increased use of induction crucible furnaces for cast iron smelting. The use of gas cupola’s duplex process – induction crucible furnace – has been proved the effective direction of scientific and technical advance in the foundry industry. Gas cupolas and induction furnaces are used for cast iron smelting at the Penza Compressor Plant where in the 1960s the author developed and introduced gas cupolas for the first time in the world. In the article, the author represents the findings of the investigation on thermodynamics of crucible reduction of silicon, which is pivotal when choosing the technological mode for cast iron smelting in induction furnaces. The author proposes a new reaction crucible diagram with due account of both partial pressure and activity of the components involved into the process. For the first time ever, the electrochemical mechanism of a crucible reaction has been studied and the correctness of the proposed diagram has been confirmed.
Źródło:
Archives of Foundry Engineering; 2017, 17, 3; 45-50
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination of Electrical Resistance of Carburizers Used for Cast Iron Production
Autorzy:
Książek, D.
Koza, M.
Bieroński, M.
Krasa, O.
Kuś, R.
Powiązania:
https://bibliotekanauki.pl/articles/381730.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cast iron
foundry material
carburizer
electrical resistance
żeliwo
materiał odlewniczy
nawęglacz
opór elektryczny
Opis:
The publication presents the results of examination of selected carburizers used for cast iron production with respect to their electric resistance. Both the synthetic graphite carburizers and petroleum coke (petcoke) carburizers of various chemical composition were compared. The relationships between electrical resistance of tested carburizers and their quality were found. The graphite carburizers exhibited much better conductivity than the petcoke ones. Resistance characteristics were different for the different types of carburizers. The measurements were performed according to the authors’ own method based on recording the electric current flow through the compressed samples. The samples of the specified diameter were put under pressure of the gradually increased value (10, 20, 50, 60, and finally 70 bar), each time the corresponding value of electric resistance being measured with a gauge of high accuracy, equal to 0.1μΩ. The higher pressure values resulted in the lower values of resistance. The relation between both the thermal conductance and the electrical conductance (or the resistance) is well known and mentioned in the professional literature. The results were analysed and presented both in tabular and, additionally, in graphic form.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 65-68
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of Ferritic Nodular Cast Iron Containing About 5-6% Aluminium
Autorzy:
Soiński, M. S.
Kordas, P.
Skurka, K.
Jakubus, A.
Powiązania:
https://bibliotekanauki.pl/articles/379726.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technology
innovative foundry material
metallography
Al-alloyed cast iron
spheroidization
graphite precipitates
innowacyjna technologia odlewnicza
innowacyjny materiał odlewniczy
metalografia
żeliwo stopowe
sferoidyzacja
wydzielenia grafitu
Opis:
The work presents results of investigations concerning the production of cast iron containing about 5-6% aluminium, with the ferritic matrix in the as-cast state and nodular or vermicular graphite precipitates. The examined cast iron came from six melts produced under the laboratory conditions. It contained aluminium in the amount of 5.15% to 6.02% (carbon in the amount of 2.41% to 2.87%, silicon in the amount of 4.50% to 5.30%, and manganese in the amount of 0.12% to 0.14%). After its treatment with cerium mixture and graphitization with ferrosilicon (75% Si), only nodular and vermicular graphite precipitates were achieved in the examined cast iron. Moreover, it is possible to achieve the alloy of pure ferritic matrix, even after the spheroidizing treatment, when both the aluminium and the silicon occur in cast iron in amounts of about 5.2÷5.3%.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 141-146
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methodology of Fault Diagnosis in Ductile Iron Melting Process
Autorzy:
Perzyk, M.
Kozlowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/382169.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
quality management
information technology
foundry industry
process fault diagnosis
ductile iron
data driven model
zarządzanie jakością
technologia informatyczna
przemysł odlewniczy
diagnostyka uszkodzeń
żeliwo ADI
model danych
Opis:
Statistical Process Control (SPC) based on the Shewhart’s type control charts, is widely used in contemporary manufacturing industry, including many foundries. The main steps include process monitoring, detection the out-of-control signals, identification and removal of their causes. Finding the root causes of the process faults is often a difficult task and can be supported by various tools, including data-driven mathematical models. In the present paper a novel approach to statistical control of ductile iron melting process is proposed. It is aimed at development of methodologies suitable for effective finding the causes of the out-of-control signals in the process outputs, defined as ultimate tensile strength (Rm) and elongation (A5), based mainly on chemical composition of the alloy. The methodologies are tested and presented using several real foundry data sets. First, correlations between standard abnormal output patterns (i.e. out-of-control signals) and corresponding inputs patterns are found, basing on the detection of similar patterns and similar shapes of the run charts of the chemical elements contents. It was found that in a significant number of cases there was no clear indication of the correlation, which can be attributed either to the complex, simultaneous action of several chemical elements or to the causes related to other process variables, including melting, inoculation, spheroidization and pouring parameters as well as the human errors. A conception of the methodology based on simulation of the process using advanced input - output regression modelling is presented. The preliminary tests have showed that it can be a useful tool in the process control and is worth further development. The results obtained in the present study may not only be applied to the ductile iron process but they can be also utilized in statistical quality control of a wide range of different discrete processes.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 101-108
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Trends in the Production of Castings in the World and in Poland in the XXI Century
Autorzy:
Soiński, M. S.
Kordas, P.
Skurka, K.
Powiązania:
https://bibliotekanauki.pl/articles/381362.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry production
cast iron
cast steel
aluminium alloys
non-ferrous alloys
produkty odlewnicze
żeliwo
staliwo
stopy aluminium
stopy metali nieżelaznych
Opis:
The paper presents data concerning the total production of castings over the 2000-2014 period, both on a global scale, and in Poland. The basic types of casting alloys were taken into account. Changes in the production volume and structure over the period of the analysed 15 years were pointed out with respect to countries leading in foundry production. The topmost position in the world foundry industry is held by China for several years (with almost 45% share in the foundry market), the second place is taken by India (with almost 9% share). A distinct reduction in the shares of the once significant producers of castings, such as USA, Japan, Germany, Russia, Italy, or France, was observed over the 2000-2014 period. Poland had a share of 1.16% in 2000, and of 1.02% in 2014. Comparing the detailed data concerning the years 2000 and 2014, one can see that the fractions of castings made of ductile iron, cast steel, aluminium alloys, or magnesium alloys increase on a global scale, while such alloys as grey cast iron or malleable are in decline.
Źródło:
Archives of Foundry Engineering; 2016, 16, 2; 5-10
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure of Foundry Production in the World and in Poland over the 1974-2013 Period
Autorzy:
Soiński, M. S.
Skurka, K.
Jakubus, A.
Kordas, P.
Powiązania:
https://bibliotekanauki.pl/articles/381277.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
foundry production
cast iron
cast steel
aluminium alloy
nonferrous alloy
produkcja odlewnicza
żeliwo
staliwo
stop aluminium
stop nieżelazny
Opis:
The paper presents data illustrating the total production of castings in the world and in Poland over the 1974-2013 period. The fractions of basic casting alloys in the total amount of material used for the production of metal castings during the considered period of time were found. It was noticed that the fraction of grey cast iron castings in the total amount of the produced castings decreased significantly over the past 40 years, both on a global scale (from about 65-75% to about 45%) and in Poland (from about 75-80% to about 45-55%). The fraction of SG iron increased considerably, up to about 25% in the world, and up to about 12-16% in Poland. The fraction of malleable became almost negligible (about 1%). The fraction of cast steel took different course in Poland and in the world: it stabilised on a global scale at about 10% in recent years, but dropped down to the level of about 4-7% in Poland. The use of aluminium alloys for the production of casting grew dynamically; their fraction in the total production of casting rose from somewhat less than 4% to almost 15% on a global scale. As far as Poland is considered, this growth was ever more intensive: from about 6-8% to about 25-30% in the 1989-2013 period (the detailed data for the previous period of time are lacking).
Źródło:
Archives of Foundry Engineering; 2015, 15, 2 spec.; 69-76
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Cooling Rate on Microstructure of Thin-Walled Vermicular Graphite Iron Castings
Autorzy:
Górny, M.
Kawalec, M.
Sikora, G.
Powiązania:
https://bibliotekanauki.pl/articles/380738.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
innovative foundry technologies
innovative materials
vermicular graphite cast iron
cooling rate
thermal analysis
microstructure
innowacyjne technologie odlewnicze
materiały innowacyjne
żeliwo grafitowe wermikularne
chłodzenie
analiza termiczna
mikrostruktura
Opis:
This article addresses the effect of cooling rate and of titanium additions on the microstructure of thin-walled vermicular graphite iron (TWCI) castings as determined by changing molding media, section size and Ferro Titanium. The research work was carried out on TWCI castings and reference castings of 2-5 mm and 13-mm wall thickness, respectively. Various molding materials were employed (silica sand and insulating sand ‘‘LDASC’’) to achieve different cooling rates. Thermal analysis was implemented for determinations of the actual cooling rates at the onset of solidification. This study shows that the cooling rates exhibited in the TWCI castings varies widely (70- 14oC/s) when the wall thickness is changed from 2 to 5 mm. In turn, this is accompanied by a significant variation in the vermicular graphite fraction. The resultant cooling rates were effectively reduced by applying an insulating sand in order to obtain the desired vermicular graphite shape. In addition, good agreement was found between the theoretical predictions of the solidification process and the experimental outcome. Ti additions in combination with LDASC sand molds were highly effective in promoting the development of over 80 % vermicular graphite in castings with wall thicknesses of 2 and 3 mm as evidenced by quantitative metallographic analyses.
Źródło:
Archives of Foundry Engineering; 2014, 14, 1 spec.; 139-142
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problem z wadami gazowymi w odlewni żeliwa
Problem with Castings Gas Defects in Iron Foundry
Autorzy:
Kołodziej, R.
Kostrzewski, Ł.
Szajnar, J.
Powiązania:
https://bibliotekanauki.pl/articles/379736.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
żeliwo sferoidalne
wada gazowa
pęcherz zewnętrzny
odlewnia żeliwa
ductile cast iron
gas defect
external bladder
iron foundry
Opis:
Przedstawione w artykule zagadnienia dotykają problemu wad gazowych występujących w Odlewni Żeliwa. Obejmują one genezę nakłuć oraz pęcherzy zewnętrznych pojawiających się na odlewach z żeliwa EN-GJS-400-15. Pokazano w jaki sposób w warunkach przemysłowych odlewni dokonano analizy pochodzenia tych wad. Przedstawiono wyniki badań próbek pobranych z problematycznych odlewów oraz metody ich badań. Wskazano również w jaką niezbędną aparaturę pomiarową należy zaopatrzyć Odlewnię aby w przyszłości na etapie przygotowania procesu, można było prognozować i redukować występowanie nakłuć oraz pęcherzy zewnętrznych.
Presented paper concerns the issues of gas defects occurring during casting manufacturing in a foundry. These include the origin of pinholes and external bladders that appear on the external surface of EN-GJS-400-15 grade cast iron castings. The paper shows how, in industrial conditions, such defects are analyzed. Examinations results for samples taken from the problematic castings were shown together with applied methods description. It was also indicated, what kind of measuring equipment is necessary to predict and reduce the occurrence of gas defects in the future production.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3 spec.; 75-78
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Synergy of practical knowledge of molding sands reclamation in heavy casting foundry of iron alloys
Autorzy:
Ignaszak, Z.
Prunier, J. B.
Powiązania:
https://bibliotekanauki.pl/articles/379704.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
furan molding sand
dry mechanical reclamation
iron alloy foundry
heavy casting
lifetime
furan sand
thermo mechanical database
masa formierska furanowa
sucha regeneracja mechaniczna
stop żelaza
odlew ciężki
trwałość
baza danych termomechaniczna
Opis:
The paper summarizes research realized by the author in laboratory and industrial conditions (foundries of cast steel and cast iron, castings up to 50 tons) on the effects of the chemically hardened molding sands regeneration using hard/soft rubbing in the dry reclamation. A reference was simultaneously made to advisability of application of the thermal regeneration in conditions, where chromite amount in the circulating (reclaimed) molding sand goes as high as above ten percent. An advisability of connecting standard and specialized methods of examination of the reclaimed sands and molding sands made using it was pointed out. A way of application of studies with the Hot Distortion Plus® method modified by the author for validation of modeling of the thermo-dynamic phenomena in the mold was shown.
Źródło:
Archives of Foundry Engineering; 2013, 13, 3; 30-36
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza stanu naprężeń w konstrukcjach odlewu korpusu, pokrywy i klina zasuw klinowych do gazu
Analysis of the state of stress in cast bodies, covers and wedges of the wedge gate valves used in gas networks
Autorzy:
Gwiżdż, A.
Żuczek, R.
Nowak, M.
Powiązania:
https://bibliotekanauki.pl/articles/391680.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Odlewnictwa
Tematy:
komputerowe wspomaganie produkcji odlewniczej
symulacja rozkładu naprężeń
armatura żeliwna
computer-aided foundry production
simulation of stress distribution
cast iron fittings
Opis:
Przeprowadzono analizę numeryczną rozkładu naprężeń eksploatacyjnych w zasuwach miękko uszczelnionych do sieci gazowych z rur PE odlewanych z żeliwa sferoidalnego EN-GJS-400-15. Analiza przeprowadzona została z wykorzystaniem systemu ANSYS, na podstawie danych i dokumentacji dotyczącej rzeczywistych warunków próby, przeprowadzanych w Fabryce Armatur JAFAR SA. Zastosowanie oprogramowania ANSYS pozwoliło na zintegrowanie analiz numerycznych opracowanej konstrukcji wirtualnej, obciążanej ciśnieniem próby, z reakcją rzeczywistej konstrukcji w trakcie prób laboratoryjnych prowadzonych na stanowisku do analizy szczelności, wraz z możliwością weryfikacji wyników wirtualnych i rzeczywistych. W niniejszej publikacji przedstawiono wyniki analizy dla zaworów DN50 i DN150. Wyniki tej analizy wykorzystane będą do weryfikacji konstrukcji odlewów wchodzących w skład modeli zasuw klinowych, poprzez poprawki wymiarowe konstrukcji.
Numerical analysis was carried out to establish the operating stress distribution in soft-sealed gate valves cast from ductile iron EN-GJS-400-15 for the gas network of PE pipes. The analysis was carried out with ANSYS software, based on data and documentation of actual test conditions used at the JAFAR SA Fittings Factory. The use of ANSYS software allowed integration between the results of numerical analysis of the developed virtual structure loaded with test pressure and the response of real structure obtained during laboratory tests carried out on a stand for pressure leak testing, with further possibility of a verification of the results, both virtual and real. This publication presents the results of the analysis carried out on DN50 and DN150 gate valves. Through dimensional corrections introduced to the design, the results of this analysis will be used in verification of castings operating as components in models of the wedge gate valves.
Źródło:
Prace Instytutu Odlewnictwa; 2012, 52, 4; 127-153
1899-2439
Pojawia się w:
Prace Instytutu Odlewnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Wyświetlanie 1-15 z 28

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies