Temat: innovative casting materials - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Investment Casting of AZ91 Magnesium Open-Cell Foams
Autorzy:: Kapłon, Honorata
Dmitruk, Anna
Naplocha, Krzysztof
Powiązania:: https://bibliotekanauki.pl/articles/27314112.pdf
Data publikacji:: 2023
Wydawca:: Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:: innovative foundry technologies
innovative materials
metal foams
investment casting
magnesium alloy
Innowacyjne technologie odlewnicze
innowacyjne materiały
pianki metalowe
stopy magnezu
Opis:: The process of investment casting of AZ91 magnesium alloy open-cell porosity foams was analysed. A basic investment casting technique was modified to enable the manufacturing of magnesium foams of chosen porosities in a safe and effective way. Various casting parameters (mould temperature, metal pouring temperature, pressure during metal pouring and solidifying) were calculated and analysed to assure complete mould filling and to minimize surface reactions with mould material. The foams manufactured with this method have been tested for their mechanical strength and collapsing behaviour. The AZ91 foams acquired in this research turned out to have very high open porosity level (>80%) and performed with Young’s modulus of ~30 MPa on average. Their collapsing mechanism has turned out to be mostly brittle. Magnesium alloy foams of such morphology may find their application in fields requiring lightweight materials of high strength to density ratio or of high energy absorption properties, as well as in biomedical implants due to magnesium’s high biocompatibility and its mechanical properties similar to bone tissue.
Źródło:: Archives of Foundry Engineering; 2023, 23, 1; 11--16
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Selection of materials and development of technology for the production of elements used in conditions of extreme tribological wear
Autorzy:: Wilk-Kołodziejczyk, D.
Pirowski, Z.
Grudzień-Rakoczy, M.
Bitka, A.
Chrzan, T.
Powiązania:: https://bibliotekanauki.pl/articles/2079807.pdf
Data publikacji:: 2021
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting technologies
wear
selection of materials
conditions of extreme
shell mold
innowacyjne technologie odlewnicze
zużycie tribologiczne
dobór materiałów
warunki ekstremalne
Opis:: Work was done as a part of the project " New generation haulage system of highly productive longwall systems" aiming to develop and implement a new longwall shearer system called KOMTRACK. The widely used EICOTRACK feed system developed forty years ago is not adapted to modern longwall shearers' power. Within the project, an innovative, flexible feed system with a modular structure was created with the possibility of continuous adjustment to the carbon wall's unevenness. Newly-developed three cast steels variants have been initially selected to fabricate this system's elements. The material's final selection was realized based on the tensile tests, Charpy impact tests, Brinell hardness surveys, and wear resistance measurements. Results analysis allowed to select cast steel marked as "2", which fulfilled all requirements and was used in further casting trials.
Źródło:: Archives of Foundry Engineering; 2021, 21, 4; 47-54
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The Influence of Various Matrixes on the Strength Properties of Moulding Sands with Thermally Hardened Hydrated Sodium Silicate for the Ablation Casting Process
Autorzy:: Major-Gabryś, Katarzyna
Puzio, Sabina
Bryłka, Agata
Kamińska, Jadwiga
Powiązania:: https://bibliotekanauki.pl/articles/2056023.pdf
Data publikacji:: 2021
Wydawca:: Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:: innovative foundry technologies and materials
moulding sand
ablation casting
water glass
thermal curing
innowacyjne technologie
materiały odlewnicze
piasek formierski
odlewanie ablacyjne
szkło wodne
utwardzanie termiczne
Opis:: The essence of ablation casting technology consists in pouring castings into single-use moulds made from the mixture of sand and a water-soluble binder. After pouring the mould with liquid metal yet while the casting is still solidifying, the mould destruction (washing out, erosion) takes place using a stream of cooling medium, which in this case is water. This paper focuses on the selection of moulding sands with hydrated sodium silicate for moulds used in ablation casting. The research is based on the use of water glass 145 and 150 as binders. As part of the research, loose moulding mixtures based on two silica sands from different sand mines with different content of binders were prepared. The review of literature data and the results of own studies have shown that moulding sand with hydrated sodium silicate hardened by dehydration is characterized by sufficient strength properties to be used in the ablation casting process. Our own research also confirmed the possibility of using these sand mixtures in terms of both casting surface quality and sand reclamation. The results presented in this paper prove that both sand grains and types of binder tested may be used as components in moulding sands devoted to ablation casting.
Źródło:: Journal of Casting & Materials Engineering; 2021, 5, 2; 31--35
2543-9901
Pojawia się w:: Journal of Casting & Materials Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Using of Technology Semisolid Squeeze Casting by Different Initial States of Material
Autorzy:: Martinec, D.
Pastirčák, R.
Kantoríková, E.
Powiązania:: https://bibliotekanauki.pl/articles/379567.pdf
Data publikacji:: 2020
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
solidification process
squeeze casting
aluminium alloy
crystallisation under pressures
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
proces krzepnięcia
wyciskanie
stop aluminium
krystalizacja pod ciśnieniem
Opis:: The paper deals with the effect of heating of various prepared batch materials into semisolid state with subsequent solidification of the cast under pressure. The investigated material was a subeutectic aluminium alloy AlSi7Mg0.3. The heating temperature to the semisolid was chosen at 50% liquid phase. The used material was prepared in a variety of ways: heat treatment, inoculation and by squeeze casting. Also the influence of the initial state of material on inheritance of mechanical properties and microstructure was observed. The pressure was 100 MPa. Effect on the resulting casting structure, alpha phase distribution and eutectic silicon was observed. By using semisolid squeeze casting process the mechanical properties and microstructures of the casts has changed. The final microstructure of the casts is very similar to the microstructure that can be reached by technology of thixocasting. The mechanical properties by using semisolid squeeze casting has been increased except the heat treated material.
Źródło:: Archives of Foundry Engineering; 2020, 20, 1; 117-121
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Lead-Free Casting Brasses. Investigations of the Corrosion Resistance and Shaping of Microstructure and Properties
Autorzy:: Kozana, J.
Garbacz-Klempka, A.
Piękoś, M.
Powiązania:: https://bibliotekanauki.pl/articles/379921.pdf
Data publikacji:: 2019
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
lead-free casting brasses
mechanical properties
microstructure
environmental protection
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewy mosiężne bezołowiowe
właściwości mechaniczne
mikrostruktura
ochrona środowiska
Opis:: The ecological factor is very important in shaping properties of alloys. It leads to a limitation or elimination, from the surroundings, of harmful elements from the heavy metals group. The so-called eco-brasses group comprises common lead-free brasses containing 10 to 40% of zinc and arsenic brasses of a high dezincification resistance. Among standardized alloys, CW511L alloy ( acc. to EN standard) or MS-60 alloy (acc. to DIN) can be mentioned. Investigations were performed on two different kinds of metal charges: ingots cast by gravity and the ones obtained in the semi-continuous casting technology with using crystallizers. The casting quality was analysed on the basis of the microstructure images and mechanical properties. The investigations also concerned increasing the corrosion resistance of lead-free alloys. This resistance was determined by the dezincification tendency of alloys after the introduction of alloying additions, i.e. aluminium, arsenic and tin. The investigations focused on the fact that not only alloying additions but also the production methods of charge materials are essential for the quality of produced castings. The introduced additions of aluminium and tin in amounts: 0÷1.2 wt% decreased the dezincification tendency, while arsenic, already in the amount of 0.033 wt%, significantly stopped corrosion, limiting the dezincification process of lead-free CuZn37 brass. At higher arsenic contents, corrosion occurs only within the thin surface layer of the casting (20 μ).
Źródło:: Archives of Foundry Engineering; 2019, 2; 113-118
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: New Use of Instruments for More Accurate Wax Pattern Blade Segment Production
Autorzy:: Herman, A.
Kubelková, I.
Vrátný, O.
Powiązania:: https://bibliotekanauki.pl/articles/381106.pdf
Data publikacji:: 2019
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: foundry industry
application of information technology
innovative foundry technologies
innovative materials
Investment casting
gas turbines
infrared thermography
simulation
przemysł odlewniczy
zastosowanie technologii informatycznej
innowacyjne technologie odlewnicze
innowacyjne materiały
turbiny gazowe
symulacja
Opis:: Precision casting is currently motivated by high demand especially for castings for the aerospace, automotive and gas turbine industries. High demands on precision of this parts pressure foundries to search for the new tools which can help them to improve the production. One of these tools is the numerical simulation of injection process, whereas such software especially for investment casting wax injection, process does not exist yet and for this case must be the existing software, for alloys or plastic, modified. This paper focuses on the use of numerical simulations to predict the behavior of injected models of gas turbine blades segments. The properties of wax mixtures, which were imported into the Cadmould simulation software as a material model, were found. The results of the simulations were verified using the results of 3D scanning measurements of wax models. As a supporting technology for verifying the results was used the Infrared Thermography.
Źródło:: Archives of Foundry Engineering; 2019, 2; 101-106
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Influence of Modification in Centrifugal Casting on Microstructure and Mechanical Properties of Silicon Bronzes
Autorzy:: Garbacz-Klempka, A.
Kozana, J.
Piękoś, M.
Papaj, P.
Perek-Nowak, M.
Powiązania:: https://bibliotekanauki.pl/articles/379593.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
CuSi alloys
centrifugal casting
microstructure
mechanical properties
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
stop Cu-Si
odlewanie odśrodkowe
mikrostruktura
właściwości mechaniczne
Opis:: Silicon bronzes are characterised by good mechanical properties and by high corrosion and mechanical wear resistance. The process of sleeve casting by means of the centrifugal casting with the horizontal axis of the mould rotation was analysed. The assessment of the influence of modification and centrifugal casting parameters on the microstructure and mechanical properties of alloys was carried out in the hereby work. Zirconium was applied as a modifier. Speed of rotation of the mould was the variable parameter of the centrifugal casting. The investigation results were summarised on the basis of the microstructure analysis and mechanical properties determination: UTS, proof stress, A10 and BHN. The experiment aimed at finding the information in which way the modification together with changing the pouring parameters influence the mechanical properties of the CuSi3Zn3FeMn alloy.
Źródło:: Archives of Foundry Engineering; 2018, 18, 3; 11-18
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: The Microstructure and Properties of the Bimetallic AZ91/AlSi17 Joint Produced by Compound Casting
Autorzy:: Mola, R.
Bucki, T.
Powiązania:: https://bibliotekanauki.pl/articles/381472.pdf
Data publikacji:: 2018
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
casting process
microstructure
mechanical properties
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
proces odlewania
mikrostruktura
właściwości mechaniczne
Opis:: Bimetallic AZ91/AlSi17 samples were produced by compound casting. The casting process involved pouring the AZ91 magnesium alloy heated to 650ºC onto a solid AlSi17 aluminum alloy insert placed in a steel mould. Prior to casting, the mould with the insert inside was heated to about 370ºC. The bonding zone formed between AZ91 and AlSi17 had a thickness of about 200 μm; it was characterized by a non-homogeneous microstructure. Two different areas were distinguished in this zone: the area adjacent to the AZ91 and the area close to the AlSi17. In the area closest to the AZ91 alloy, a eutectic composed of an Mg17Al12 intermetallic phase and a solid solution of Al in Mg was observed. In bonding zone at a certain distance from the AZ91 alloy an Mg2Si phase co-occurred with the eutectic. In the area adjacent to the AlSi17 alloy, the structure consisted of Al3Mg2, Mg17Al12 and Mg2Si. The fine Mg2Si phase particles were distributed over the entire Mg-Al intermetallic phase matrix. The microhardness of the bonding zone was much higher than those of the materials joined; the microhardness values were in the range 203-298 HV. The shear strength of the AZ91/AlSi17 joint varied from 32.5 to 36 MPa.
Źródło:: Archives of Foundry Engineering; 2018, 18, 1; 71-76
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Analysis of Crystallization Process of Intensive Cooled AlSi20CuNiCoMg Alloy
Autorzy:: Władysiak, R.
Kozuń, A.
Dębowska, K.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/379541.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative foundry technologies
innovative foundry materials
casting die cooling
water mist
silumin
innowacyjne technologie odlewnicze
innowacyjne materiały odlewnicze
odlewanie kokilowe
mgła wodna
Opis:: The work is a continuation of research concerning the influence of intensive cooling of permanent mold in order to increase the casting efficiency of aluminium alloys using the multipoint water mist cooling system. The paper presents results of investigation of crystallization process and microstructure of multicomponent synthetic hypereutectic alloy AlSi20CuNiCoMg. The study was conducted for unmodified silumin on the research station allowing the cooling of the special permanent sampler using a program of computer control. Furthermore the study used a thermal imaging camera to analyze the solidification process of multicomponent alloy. The study demonstrated that the use of mold cooled with water mist stream allows in wide range to form the microstructure of hypereutectic multicomponent silumin. It leads to higher homogeneity of microstructure and refinement of crystallizing phases of casting.
Źródło:: Archives of Foundry Engineering; 2017, 17, 2; 137-144
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Application of Modified Cores for Grain Refinement in Castings of Aircraft Turbine Blades
Autorzy:: Binczyk, F.
Cwajna, J.
Gradoń, P.
Powiązania:: https://bibliotekanauki.pl/articles/382651.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
Nickel alloy IN-713C
surface modification
turbine blades
macrostructure
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
Stop niklu IN-713C
modyfikacja powierzchni
łopatki turbinowe
makrostruktura
Opis:: Paper presents the results of research on modified surface grain refinement method used in investment casting of hollow, thin-walled parts made of nickel based superalloys. In the current technology, the refining inoculant is applied to the surface of the wax pattern and then, it is transferred to the ceramic mould surface during dewaxing. Because of its chemical activity the inoculant may react with the liquid metal which can cause defects on the external surface of the cast part. The method proposed in the paper aims to reduce the risk of external surface defects by applying the grain refiner only to the ceramic core which shapes the internal surface of the hollow casting. In case of thin-walled parts the grain refinement effect is visible throughout the thickness of the walls. The method is meant to be used when internal surface finish is less important, like for example, aircraft engine turbine blades, where the hollowing of the cast is mainly used to lower the weight and aid in cooling during operation.
Źródło:: Archives of Foundry Engineering; 2017, 17, 3; 19-22
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 11.

Tytuł:: ATD and DSC Analysis of IN-713C and ZhS6U-VI Superalloys
Autorzy:: Binczyk, F.
Cwajna, J.
Gradoń, P.
Powiązania:: https://bibliotekanauki.pl/articles/381895.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative casting materials
innovative casting technologies
Nickel superalloys
ATD method
DSC method
solidification parameters
innowacyjne materiały odlewnicze
innowacyjne technologie odlewnicze
stopy niklu
metoda ATD
metoda DSC
parametry krzepnięcia
Opis:: Paper presents the results of ATD and DSC analysis of two superalloys used in casting of aircraft engine parts. The main aim of the research was to obtain the solidification parameters, especially Tsol and Tliq, knowledge of which is important for proper selection of casting and heat treatment parameters. Assessment of the metallurgical quality (presence of impurities) of the feed ingots is also a very important step in production of castings. It was found that some of the feed ingots delivered by the superalloy producers are contaminated by oxides located in shrinkage defects. The ATD analysis allows for quite precise interpretation of first stages of solidification at which solid phases with low values of latent heat of solidification are formed from the liquid. Using DSC analysis it is possible to measure precisely the heat values accompanying the phase changes during cooling and heating which, with knowledge of phase composition, permits to calculate the enthalpy of formation of specific phases like γ or γ′.
Źródło:: Archives of Foundry Engineering; 2017, 17, 1; 13-16
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 12.

Tytuł:: Effect of Alloy Additions on the Structure and Mechanical Properties of the AlSi7Mg0.3 Alloy
Autorzy:: Pisarek, B. P.
Rapiejko, C.
Szymczak, T.
Pacyniak, T.
Powiązania:: https://bibliotekanauki.pl/articles/380373.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innowacyjne technologie odlewnicze
materiały odlewnicze
odlew precyzyjny
stopy aluminium
dodatki stopowe
SDAS
indeks jakości
innovative casting technologies
innovative materials
precision investment casting
aluminium alloys
alloy additions
quality index
Opis:: The study presents the results of the investigations of the effect of Cu, Ni, Cr, V, Mo and W alloy additions on the microstructure and mechanical properties of the AlSi7Mg0.3 alloy. The examinations were performed within a project the aim of which is to elaborate an experimental and industrial technology of producing elements of machines and devices complex in their construction, made of aluminium alloys by the method of precision investment casting. It was demonstrated that a proper combination of alloy additions causes the crystallization of complex intermetallic phases in the silumin, shortens the SDAS and improves the strength properties: Rm, Rp0.2,HB hardness. Elevating these properties reduces At, which, in consequence, lowers the quality index Q of the alloy of the obtained casts. Experimental casts were made in ceramic moulds preliminarily heated to 160 °C, into which the AlSi7Mg0.3 alloy with the additions was cast, followed by its cooling at ambient temperature. With the purpose of increasing the value of the quality index Q, it is recommended that the process of alloy cooling in the ceramic mould be intensified and/or a thermal treatment of the casts be performed (ageing) (T6).
Źródło:: Archives of Foundry Engineering; 2017, 17, 1; 137-142
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 13.

Tytuł:: Method and Apparatus for Assessing the Properties of Slags
Autorzy:: Biernat, S.
Bydałek, A. W.
Wołczyński, W.
Holtzer, M.
Powiązania:: https://bibliotekanauki.pl/articles/381284.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: environmental protection
innovative materials
innovative casting technologies
laboratory station
slags
ochrona środowiska
innowacyjne materiały odlewnicze
technologie innowacyjne
stanowisko laboratoryjne
żużle
Opis:: A special Slag-Prop Cu database has been developed to archive data from laboratory and industrial tests related to post-reduction slags. In order to enrich the data areas, it was decided to design a system for measuring the temperature of the liquid slag and its viscosity. Objectives of research work are to gather information on the properties of post-slags such as the temperature of liquid slag and its viscosity. The discussed issues are especially important in the foundry practice. Designed research stand and using of database applications can greatly facilitate the work of metallurgists, foundrymen, technologists and scientists. The viscosity measurement was developed and presented earlier. The author's analytical methodology was supplemented by a thyristor measuring system (described in the article). The system temperature measurement can be performed simultaneously in 3 ways to reduce the measurement error. Measurement of the voltage mV - using the Seebeck effect can be measured throughout the entire range of thermocouple resistance, up to 1300 °C. Direct temperature measurement ⁰C - measurement only below 1000 ⁰C. Additional measurement - the measurement can also be read from the pyrometer set above the bath. The temperature and the reading frequency depend on the device itself. The principle of measurement is that in a molten metal / slag crucible, we put a N-type thermocouple. The thermocouples are hung by means of a tripod above the crucible and placed in a crucible. The thermocouple is connected to a compensating line dedicated to this type of thermocouple. The cable is in turn connected to a special multimeter that has the ability to connect to a computer and upload results. Temperature measurement can be performed simultaneously in 3 ways to reduce the measurement error. The Sn-Pb alloy has been subjected to testing for proper operation of the device. In this foot should be observed the supercooling of the liquid, which initiates the crystallization process and in which latent heat begins to exude raising the temperature until the coagulation temperature is reached.
Źródło:: Archives of Foundry Engineering; 2017, 17, 3; 13-18
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 14.

Tytuł:: Studies of Binding Kinetics and Choice of Self-Hardening Moulding and Core Sands Used for Casting Massive Parts for Wind Power Industry under the Conditions of Krakodlew Foundry
Autorzy:: Rączka, M.
Isendorf, B.
Powiązania:: https://bibliotekanauki.pl/articles/382470.pdf
Data publikacji:: 2017
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: wind energy
innovative materials
innovative casting technologies
environmental protection
ductile iron
moulding sand
energia wiatrowa
innowacyjne materiały
innowacyjna technologia odlewania
ochrona środowiska
żeliwo
masy formierskie
Opis:: In highly developed countries, a significant progress in the use of alternative and clean energy sources has recently been observed. The European Union has implemented a programme to build wind turbines. It is estimated that in the coming years, thanks to the support in tax and credit, the global energy will develop very intensively. Many components of the wind turbines are castings. The basic material used for these castings is ductile iron, which in this particular case must meet high requirements imposed by the operating conditions of wind turbines. Anticipating an increase in customer demand for this type of castings, Krakodlew SA has decided to modernize its foundry using the ability to obtain external financing. The ductile iron manufacturing technology is now being developed and adapted to the specific conditions of the foundry plant, including the melting process yielding cast material with the required chemical composition, the technology of moulding, and the conditions for possible secondary metallurgy, spheroidizing treatment and graphitizing inoculation. The fulfilment of the imposed conditions for the casting production demands the use of advanced casting technologies introduced to the manufacturing process. The development of technology to launch the production of ductile iron castings for the wind power industry was supported by The National Centre for Research and Development (NCBiR). This article presents part of research on the binding kinetics of furan resin sands and choice of their composition for moulds and cores to make heavy castings used as components of equipment for the wind power industry.
Źródło:: Archives of Foundry Engineering; 2017, 17, 2; 222-226
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 15.

Tytuł:: 3DP Technology for the Manufacture of Molds for Pressure Casting
Autorzy:: Skorulski, G.
Powiązania:: https://bibliotekanauki.pl/articles/383141.pdf
Data publikacji:: 2016
Wydawca:: Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:: innovative materials
innovative casting technologies
rapid prototyping
ceramic mold
pressure casting
materiały innowacyjne
innowacyjne technologie odlewnicze
prototypy
formy ceramiczne
odlewanie ciśnieniowe
Opis:: The paper presents the use of rapid prototyping technology of three dimensional printing (3DP) to make a prototype shell casting mold. In the first step, for identification purposes, a mold was prepared to enable different alloys to be cast. All molds being cast were designed in a universal CAD environment and printed with the zp151 composite material (Calcium sulfate hemihydrate) with a zb63 binder (2-pyrrolidone). It is designated to be used to prepare colourful models presenting prototypes or casting models and molds. The usefulness of 3DP technology for use with copper alloys, aluminum and zinc was analyzed. The strength of the mold during casting was assumed as a characteristic comparative feature in the material resistance to high temperature, the quality of the resulting casting and its surface roughness. Casting tests were carried out in vacuum – pressure casting. The casting programs applied, significantly increased the quality of castings and enabled precise mold submergence. Significant improvement was noted in the quality compared to the same castings obtained by gravity casting.
Źródło:: Archives of Foundry Engineering; 2016, 16, 3; 99-102
1897-3310
2299-2944
Pojawia się w:: Archives of Foundry Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "innovative casting materials" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język