Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "ignition delay" wg kryterium: Temat


Tytuł:
The effect of injection pressure and strategy in a Jaguar V6 diesel engine
Autorzy:
Abdullah, N. R.
Mamat, R.
Rounce, P.
Wyszynski, M. L.
Tsolakis, A.
Xu, H. M.
Tian, G.
Powiązania:
https://bibliotekanauki.pl/articles/242414.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion
emissions
injection strategies
premixed combustion
ignition delay
Opis:
In recent years, the improvement of engine performance and emissions has become an extremely important concern. This study focuses on the injection strategy based on the injection pressure (IP) and duration between pilot injection and the main injection (dMI) using a multi cylinder common rail multiple injections diesel engine. The study was designed to produce improvements in fuel mixing via the injection strategy, to reduce the main ignition delay. This would contribute to a minimum amount of fuel burnt in the premixed combustion phase, leading to a reduction in emissions. Recent evidence shows that premixed combustion is significant in the controlling of emissions of nitrogen oxides (NOx) and soot. Six different IPs combined with a short and long dMI were compared in the attempt to improve engine performance and emissions. The engine performance was measured in terms of brake specific fuel consumption, ignition delay, heat release and peak in-cylinder pressure and emissions, specifically nitrogen oxides (NOx), total unburned hydrocarbons (THC), carbon monoxide (CO) and smoke emissions for each engine test condition. The evidence from this study shows that the effect of IP is more dominant than dMI in terms of peak cylinder pressure, heat release, brake specific fuel consumption and emissions. However, the dMI shows a strong effect at a higher engine speed.
Źródło:
Journal of KONES; 2009, 16, 2; 9-22
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of camelina oil ester additive to diesel fuel on self - ignition angle in agricultural engine
Autorzy:
Orliński, P.
Powiązania:
https://bibliotekanauki.pl/articles/241585.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
camelina oil ester
self-ignition delay angle
diesel engine
Opis:
The article presents the results of investigations referring to self-ignition delay angle determined experimentally and through simulations. It was done using charged agricultural Perkins 1104C-E44T engine powered by pure diesel fuel (ON) and fuel mixtures, such as: diesel fuel with 10% camelina oil ester additive (L10) and diesel fuel with 15% camelina oil ester additive (L15). Camelina oil ester was used to show that it can also be used as an additive plant to diesel fuel (according to the plans of the European Union). Similarly to on a large scale used ester of rapeseed oil. The main aim of the above mentioned research was to show the influence of the fuels on the change of self-ignition delay angle for different rotational velocity conditions of the engine and for maximum volumetric dose of ignited fuel. The research was performed using a dynamometer test stand equipped with measurement system of fast-changeable needle lift of injector and the pressures of working substance. Before starting the investigations, selected physicochemical properties of researched fuels were determined that significantly influence that parameter of the combustion process. At the end of the article the conclusion of experiments and simulations results referring to selfignition delay angle are analysed.
Źródło:
Journal of KONES; 2013, 20, 2; 323-328
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of Some Inorganic Nitrate Salts on the Ignition Delay Time of DMAZ-IRFNA and DMAZ-WFNA Bi-propellants
Autorzy:
Pakdehi, S. G.
Shirzadi, B.
Powiązania:
https://bibliotekanauki.pl/articles/358187.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Przemysłu Organicznego
Tematy:
DMAZ
liquid oxidizers
ignition delay time
inorganic nitrate salts
specific impulse
Opis:
Dimethylaminoethyl azide (DMAZ) is a good replacement for the hydrazine group in the space industry. However, it has a relatively long ignition delay time with the liquid oxidizer, white fuming nitric acid (WFNA), and is nonhypergolic with inhibited red fuming nitric acid (IRFNA). In this article, the ignition delay times of DMAZ-WFNA and DMAZ-IRFNA bi-propellants were reduced by the addition of some inorganic nitrate salts, such as NH4NO3, KNO3, NaNO3, AgNO3 and LiNO3, to the liquid oxidizers. The results showed that WFNA containing 0.1 wt.%, 0.3 wt.% and 0.5 wt.% of LiNO3 reduced the ignition delay time of DMAZ-WFNA from 88 ms to 18 ms, 14 ms and 8 ms, respectively. The same percentages of LiNO3 caused the nonhypergolic DMAZ-IRFNA bi-propellant to have ignition delay times of 42 ms, 34 ms and 22 ms, respectively. Moreover, calculations indicated that the addition of LiNO3 to both oxidizers did not have a significant affect on the specific impulse of the bi-propellants. Consequently LiNO3 could be an appropriate additive for the reduction of the ignition delay times of DMAZ-WFNA and DMAZ-IRFNA bi-propellants.
Źródło:
Central European Journal of Energetic Materials; 2018, 15, 1; 162-174
1733-7178
Pojawia się w:
Central European Journal of Energetic Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of exhaust gas recirculation on the ignition delay in supercharged compression ignition test engine
Autorzy:
Tutak, W.
Powiązania:
https://bibliotekanauki.pl/articles/410893.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
opóźnienie zapłonu
spalanie
modelowanie matematyczne
silnik
ignition delay
combustion
mathematical modelling
engine
Opis:
The results of analysis of thermal cycle of the test engine are presented in the paper. The study focused on determining the ignition delay in compression ignition engine. The correlations available in literature, Hardenberg and Hase, Wolfer and Watson and Assanis were used to determine ignition delay. With the increase of the EGR the ignition delay has increased. It turned out that very often it is necessary to determine own ignition delay correlation.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2012, 1, 2; 57-62
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Niepowtarzalność opóźnienia samozapłonu paliwa w silniku o zapłonie samoczynnym
Unrepeatability of fuel self-ignition delay in diesel engine
Autorzy:
Lotko, W.
Powiązania:
https://bibliotekanauki.pl/articles/263624.pdf
Data publikacji:
2008
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
opóźnienie
pompa wtryskowa
samozapłon
silnik o zapłonie samoczynnym
delay
diesel engine
injection pump
self-ignition delay
Opis:
Artykuł przedstawia wyniki badań realizowanych z wykorzystaniem silnika AD3.152 zasilanego olejem napędowym (ON) oraz mieszaninami paliwowymi, takimi jak: olej napędowy - eter etylo-tert-butylowy (EETB), a także: olej napadowy - odwodniony etanol (ET) - estry metylowe nienasyconych kwasów tłuszczowych (FAMIZ). Głównym celem artykułu było przeprowadzenie oceny zmian wartości wskaźnika niepowtarzalności kąta opóźnienia samozapłonu w badanym silniku zasilanym wyżej wymienionymi mieszaninami paliwowymi.
The paper presents test results carried out with using of AD3.I52 diesel engine fuelled with diesel oil and two other kinds of fuel blends: diesel - ethyl tertiary butyl ether (EETB) and diesel-anhydrous ethanol with addition of fatty acid methyl ester. The main aim of this paper was to describe selected problems of fuel self-ignition unrepeatablity phenomenon of tested diesel engine fuelled with the above mentioned fuel blends.
Źródło:
Archiwum Motoryzacji; 2008, 3-4; 195-209
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of heat release in a reciprocating engine powered by a regular fuel with pyrolysis oil addition
Autorzy:
Chwist, Mariusz
Powiązania:
https://bibliotekanauki.pl/articles/2097669.pdf
Data publikacji:
2022
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
pyrolysis oil
butanol
ignition delay
surrogates
Ansys Chemkin-Pro
olej pirolityczny
opóźnienie zapłonu
surogat
Opis:
The article presents a comparative analysis of heat release rate in a spark-ignition engine powered by various fuels as follows: butanol, gasoline, a mixture of butanol with tire pyrolysis oil (TPO), and mixtures of butanol with oil from biomass pyrolysis (BPO). Selected combustion phases were analyzed. Additionally, ignition delay calculations were performed in the ANSYS Chemkin Pro program for the surrogates of the tested fuels. Popular surrogates quoted in numerous publications were used as substitute fuels. The paper presents an original surrogate of oil from tire pyrolysis.
Źródło:
Combustion Engines; 2022, 61, 3; 104--112
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quick-Acting Electric Blasting Caps
Szybkodziałające elektryczne spłonki pobudzające
Autorzy:
Nita, M.
Warchoł, R.
Powiązania:
https://bibliotekanauki.pl/articles/403568.pdf
Data publikacji:
2018
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
armament
combat means
electric blasting caps
ignition delay
detonation
uzbrojenie
środki bojowe
elektryczne spłonki pobudzające
detonacja
Opis:
The paper presents the constructions of new, fast-acting electric initiating blasting caps of WN-1 and WN-1A types, developed at the Military Institute of Armament Technology in Zielonka (Poland). These blasting caps have been characterized in terms of the materials used for their production and the applied explosives. The investigation results of selected blasting caps and their most important characteristics are given. Among others, dependence between a response time of a blasting cap and a supply voltage was presented as well as influence of extreme temperatures on its reliability and response time was given. The investigations of the blasting caps for initiation of blasting explosives were performed and the results confirming their usefulness are presented.
W artykule zaprezentowano konstrukcje nowych, szybkodziałających elektrycznych spłonek pobudzających typu WN-1 i WN-1A, opracowanych i wykonywanych w Wojskowym Instytucie Technicznym Uzbrojenia w Zielonce. Spłonki te scharakteryzowano pod względem użytych do ich wykonania materiałów konstrukcyjnych i wybuchowych. Zaprezentowano wyniki wybranych badań spłonek oraz ich najistotniejsze charakterystyki. Przedstawiono między innymi zależności czasu zadziałania spłonek od napięcia zasilania, jak również wpływ skrajnych temperatur na niezawodność i czas zadziałania. Wykonano i zaprezentowano wyniki badań potwierdzających przydatność spłonek do pobudzania ładunków kruszących materiałów wybuchowych.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2018, 9, 2 (32); 111-120
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control-oriented analysis of a lean-burn light-duty natural gas research engine with scavenged pre-chamber ignition
Autorzy:
Hänggi, Severin
Hilfiker, Thomas
Soltic, Patric
Hutter, Richard
Onder, Christopher
Powiązania:
https://bibliotekanauki.pl/articles/134244.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
gas engine control
prechamber ignition
ignition delay control
extremum seeking
sterowanie silnikiem gazowym
zapłon komory wstępnej
kontrola opóźnienia zapłonu
poszukiwanie ekstremum
Opis:
Natural gas is well-suited as a fuel in the transport sector. Due to its excellent combustion characteristics, engines operating with compressed natural gas (CNG) reach high efficiency, especially if operated at lean conditions. However, CNG engine research mainly focusses on stoichiometric conditions in order to use a three-way catalytic converter for the exhaust gas after treatment system. With the objective to explore the potential of CNG engines operated at lean conditions, a turbo-charged CNG engine with high compression ratio is developed and optimized for lean operation. In order to increase the ignition energy, the CNG engine is equipped with scavenged pre-chambers. A specific control structure is developed, which allows to operate the engine at a pre-defined (lean) air-to-fuel ratio. Further functionalities such as the combustion placement control and algorithms to estimate the conditions inside of the prechamber are implemented. The first part of this paper describes this engine control structure, which is specifically developed for the lean-burn CNG engine. In the second part, the effects of pre-chamber scavenging on engine performance criteria such as the combustion stability, engine efficiency or engine emissions are analyzed. With the objective to use pre-chamber scavenging to improve engine performance, a scavenging feedback control strategy is proposed. In order to control the ignition delay, this strategy adapts the amount of CNG injected into the prechamber with a linear controller or an extremum seeking algorithm depending on the air-to-fuel ratio of the main chamber.
Źródło:
Combustion Engines; 2019, 58, 1; 42-53
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of glycerol doping on ignition delay times and laminar burning velocities of gasoline and diesel fuel
Autorzy:
Jach, A.
Cieślak, I.
Teodorczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/133258.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
glycerol
ignition delay time
laminar burning velocities
Cantera
gasoline
diesel
gliceryna
czas opóźnienia zapłonu
prędkość laminowania
benzyna
Opis:
Glycerol is a major by-product of biodiesel production. Per one tone of produced biodiesel, one hundred kilograms of glycerol is produced. Production of glycerol is increasing due to increase of demand for biodiesel. One of methods of glycerol utilization is combustion. Recent experimental studies with use of a diesel engine and a constant volume combustion chamber show that utilization of glycerol as a fuel results in lower NOx emissions in exhaust gases. It combusts slower than light fuel oil, what is explained by higher viscosity and density of glycerol. Glycerol has low cetane number, so to make combustion in a diesel engine possible at least one of the following conditions need to be fulfilled: a pilot injection, high temperature or high compression ratio. The aim of the paper is to compare glycerol to diesel and to assess influence of glycerol doping on gasoline and diesel fuel in dependence of pressure, temperature and equivalence ratio. The subject of this study is analysis of basic properties of flammable mixtures, such as ignition delay times and laminar burning velocities of primary reference fuels (diesel: n-heptane and gasoline: iso-octane). Calculations are performed with use of Cantera tool in Matlab and Python environments. Analyses of influence of glycerol on ignition delay times of n-heptane/air and iso-octane/air mixtures covered wide range of conditions: temperatures from 600 to 1600 K, pressure 10-200 bar, equivalence ratio 0.3 to 14, molar fraction of glycerol in fuel 0-1 in air. Simulations of LBV in air cover temperatures: 300 K and 500 K, pressures: 10, 40, 100, 200 bar and equivalence ratio from 0.3 to 1.9. Physicochemical properties of gasoline, diesel and glycerol are compared.
Źródło:
Combustion Engines; 2017, 56, 2; 167-175
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the possibilities of adapting a constant volume combustion chamber for research on ignition of hypergolic propellants under low and high-pressure conditions
Autorzy:
Krzesicki, M.
Boruc, Ł.
Kapusta, Ł. J.
Powiązania:
https://bibliotekanauki.pl/articles/133317.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
hypergolic ignition
hypergolic propellant
ignition delay
drop test
constant volume combustion chamber
zapłon hipergoliczny
opóźnienie zapłonu
komora spalania o stałej objętości
Opis:
In this study, the adaptation possibilities of a constant volume combustion chamber (CVCC) for research on the ignition of hypergolic propellants are presented. The application of hypergolic bipropellants and crucial parameters regarding their ignition behaviour are discussed. The initial studies on ignition delay measurements presented here does not cover the whole range of conditions present in practical systems where hypergolic ignition occurs. In the study, a need for an evaluation of the influence of pressure on the ignition delay was indicated as the reason to conduct research on hypergolic ignition in low and high-pressure environments. Moreover, the study reviews the state-of-the-art experimental methods of investigating the ignition under atmospheric, low and high-pressure conditions, including those utilizing a constant volume combustion chamber. The drop test was pointed out as the most commonly used method; this makes it advantageous in terms of comparing the results with those obtained by other researchers. Therefore, the drop test was selected as a method to be used in a CVCC. The test rig developed here was designed based on a CVCC initially designed for diesel sprays’ visualization in high-pressure conditions. All the required modifications, especially the design of the oxidizer dosing unit, are presented in the study.
Źródło:
Combustion Engines; 2018, 57, 2; 9-13
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of division of initial dose on combustion parameters of a dual fuel CI engine
Wpływ podziału dawki inicjującej na parametry spalania dwupaliwowego silnika o zapłonie samoczynnym
Autorzy:
Stelmasiak, Z.
Powiązania:
https://bibliotekanauki.pl/articles/133457.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
dose divided
gas
combustion parameters
heat release
ignition delay
podział dawki paliwa
gaz
parametry spalania
wywiązywanie ciepła
opóźnienie zapłonu
Opis:
Worsening of economic and environmental parameters of a dual fuel engine at partial engine loads results from protracted combustion of leaned gas-air mixture. This leads to reduction of overall efficiency and growth of CO and THC emissions. Such problems are difficult to solve in traction engines due to their frequent operation at partial loads and rapid changes of engine load and rotational speed. Negative effects of leaning of gaseous mixture can be partially diminished through division of initial dose and activation of combustion of gaseous mixture through delayed injection of additional portion of liquid fuel. In the paper are presented test results of experimental SB3.1 engine run on CNG with divided dose of the Diesel oil. There were analyzed overall efficiency and selected parameters of combustion process. Division of the dose influenced advantageously on parameters of the engine. The overall efficiency increased, while maximal pressure pmax, heat release rate (dQ/dα)max, and pressure growth rate (dp/dα)max decreased. The engine with divided dose operated more smoothly with less noise.
Pogorszenie parametrów ekonomiczno-ekologicznych silnika dwupaliwowego przy częściowych obciążeniach wynika z przewlekłego spalania zubożonej mieszaniny gaz-powietrze . Prowadzi to do zmniejszenia sprawności ogólnej silnika i wzrostu emisji CO i THC. Problemy te są trudne do rozwiązania w silnikach trakcyjnych z uwagi na częstą pracę przy częściowych obciążeniach oraz szybkie zmiany w czasie obciążenia i prędkości obrotowej. Negatywne skutki zubożenia mieszaniny gazowej można częściowo zmniejszyć przez podział dawki inicjującej i aktywizację spalania mieszaniny gazowej poprzez opóźniony wtrysk dodatkowej porcji paliwa ciekłego. W pracy przedstawiono wyniki badań silnika badawczego SB3.1 zasilanego CNG i dzieloną dawką oleju napędowego. Analizie poddano sprawność ogólną i wybrane parametry spalania. Podział dawki korzystnie wpłynął na parametry silnika. Sprawność silnika wzrosła, natomiast zmniejszeniu uległy ciśnienie maksymalne pmax, szybkość wydzielania ciepła (dQ/dα)max, szybkość przyrostu ciśnienia (dp/dα)max. Silnik z dzieloną dawką pracował bardziej równomiernie i wykazywał mniejszą hałaśliwość.
Źródło:
Combustion Engines; 2013, 52, 3; 12-24
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Combustion stability of dual fuel engine powered by diesel-ethanol fuels
Autorzy:
Nowak, Łukasz
Tutak, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/133775.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
combustion stability
heat release
dual fuel
ignition delay
combustion phases
stabilność spalania
wydzielanie ciepła
gazodiesel
opóźnienie zapłonu
fazy spalania
Opis:
The paper presents result of combustion stability assessment of dual fuel engine. The authors analyzed results of co-combustion of diesel fuel with alcohol in terms of combustion stability. The comparative analysis of both the operational parameters of the engine and the IMEP, as the parameters determining the stability of the combustion process, were carried out. It was analyzed, among others values of the COVIMEP coefficient, the spread of the maximum pressure value, the angle of the position of maximum pressure and the probability density distribution of the IMEP. The experimental investigation was conducted on 1-cylinder air cooled compression ignition engine. The test engine operated with constant rpm equal to 1500 rpm and constant angle of start of diesel fuel injection. The engine was operated with ethanol up to 50% of its energy fraction. The influence of ethanol on ignition delay time spread and end of combustion process was evaluated. It turns out that the share of ethanol does not adversely affect the stability of ignition.
Źródło:
Combustion Engines; 2019, 58, 3; 155-161
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ dodatku benzyny na właściwości samozapłonowe oleju napędowego
The effect of adding gasoline to diesel fuel on its self-ignition properties
Autorzy:
Jaworski, A.
Kuszewski, H.
Lejda, K.
Ustrzycki, A.
Woś, P.
Powiązania:
https://bibliotekanauki.pl/articles/132908.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
olej napędowy
wtrysk paliwa
pochodna liczba cetanowa
okres opóźnienia samozapłonu
diesel fuel
fuel injection
derived cetane number
self-ignition delay period
Opis:
Celem badań, których wyniki zamieszczono w niniejszym artykule jest określenie wpływu wybranych udziałów objętościowych benzyny silnikowej w oleju napędowym na właściwości samozapłonowe tak przygotowanego paliwa. Jako miara skłonności paliwa do samozapłonu wykorzystana została pochodna liczba cetanowa. Pomiaru pochodnej liczby cetanowej (DCN), a także okresu opóźnienia samozapłonu, dokonano przy użyciu aparatu umożliwiającego spalanie w komorze o stałej objętości. Wyniki oznaczeń porównano z wymaganiami legislacyjnymi i normatywnymi, jakim podlega olej napędowy.
The aim of the researches presented in this paper was to determine the effect of some volume fractions of gasoline in the diesel fuel on the self-ignition properties for such prepared fuel. As a measure of the susceptibility of fuel to self-ignition derived cetane number was used. The measurement of derived cetane number (DCN) and self-ignition delay period, was made with a device enabling combustion in constant volume chamber. The results were compared with the legislative and standard requirements for diesel fuel.
Źródło:
Combustion Engines; 2013, 52, 3; 612-617
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Self-Ignition Delay and Control Parameters of Diesel Engines for Different Vehicle Feeding Systems and Different Fuels
Autorzy:
Lotko, Wincenty
Powiązania:
https://bibliotekanauki.pl/articles/2024151.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
self-ignition delay
combustion process
fuel injection process
diesel engine
renewable fuels
opóźnienie samozapłonu
proces spalania
proces wtrysku paliwa
silnik wysokoprężny
paliwa odnawialne
Opis:
The phenomena accompanying the self-ignition period have been the subject of extensive research in this area. They are usually carried out in constant volume pressure chambers or in reactors with constant air flow. Such tests are considered to be basic. The conditions in these tests are definitely different from those in compression ignition engines. Therefore, the comparison of the auto-ignition delay periods from test setups to those obtained from real engines raises a number of doubts. Because the self-ignition delay period determines the combustion process, a theoretical analysis was conducted, pertaining to a number of factors that have an impact on this process which determines the operational aspects of the engine, and thus its economics and ecology. The research object was a single-cylinder engine from AVL LIST GmbH in Graz, Austria. The engine is equipped with a Common Rail injection system. The test setup meets the following standards: Directive 1999/96/EC of the European Parliament and the Council of 13th December 1999, Regulation (EC) No 715/2007 of the European Parliament and the Council of 20th June 2007, as well as Commission Regulation (EC) No 692 /2008 of 18th July 2008. The analysis of the operational aspects of the self-ignition delay period was based on the results of tests on the AVL 5402 engine fueled with hydrocarbon fuels: diesel and synthetic oil. The engine was also fed with vegetable fuel – rapeseed oil. The obtained material from the tests warns the user of CI engines against the effects of their failure if the engine control parameters and the quality of fuel for its supply are not maintained as recommended by the manufacturers. The material contained in the publication is used for scientific analysis, and, which is worth emphasizing, is of a utilitarian nature.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 1; 245-254
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie quasi hipergolicznego zapłonu paliw węglowodorowych z nadtlenkiem wodoru klasy HTP
Research of the quasi-hypergolic ignition of the hydrocarbon fuels in the highly concentrated hydrogen perixide of HTP class
Autorzy:
Florczuk, W.
Powiązania:
https://bibliotekanauki.pl/articles/213091.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Lotnictwa
Tematy:
samozapłon
nadtlenek wodoru
czas opóźnienia samozapłonu
samozapłonowe ekologiczne materiały pędne
silniki rakietowe
autoignition
hydrogen peroxide
auto ignition delay time
hypergolic green propellants
rocket engines
Opis:
Artykuł ten przedstawia omówienie obecnie badanych mieszanin hipergolicznych typu „green”, będących potencjalną alternatywą dla układów złożonych z hydrazyny i jej pochodnych w połączeniu z utleniaczami typu N2O4, WFNA, czy RFNA. Przedstawione wyniki badań wykazują, że większość związków chemicznych posiadające cechy samozapłonowe z nadtlenkiem wodoru klasy HTP charakteryzuje się czasem opóźnienia samozapłonu w przedziale od 10-30 ms, a niektóre z nich nawet 9 ms. W artykule zawarto również opis metod badawczych określania czasu opóźnienia samozapłonu mieszanin hipergolicznych. Dodatkowo przedstawiono opis stanowiska badawczego wykonanego w ramach projektu PULCHER z FP7 SPACE.
This article describes the survey of the presently tested green hypergolic propellants that could be used as an alternatives for highly toxic mixtures such as hydrazine and its methyl derivatives with NTO, WFNA or RFNA. Presented research results clearly demonstrate that the autoignition delays for most of them being hypergolic with HTP(High Test Peroxide) are in the range of 10-30ms. Some of these propellants promoted with hydride compounds of light transition metals exhibit AID on the level of 9 ms. In the comparison to the MMH/NTO with AID equal to 3 ms the new hypergolic green propellants seems very attractive with their performances for the new space applications. Description of the methods to test hypergolic propellants are also included. Additionally the test stand designed and manufactured in the frame of project PULCHER FP7 SPACE is demonstrated.
Źródło:
Prace Instytutu Lotnictwa; 2014, 1 (234) March 2014; 41-50
0509-6669
2300-5408
Pojawia się w:
Prace Instytutu Lotnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies