Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "heat load" wg kryterium: Temat


Tytuł:
Determination of suitableprotected production areas: Lower Euphrates basin case
Autorzy:
Saltuk, B.
Mikail, N.
Atilgan, A.
Tanriverdi, C.
Powiązania:
https://bibliotekanauki.pl/articles/101400.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
climatization
greenhouses
heat load
Lower Euphrates basin
Opis:
As a result of the increase in the world population and the decrease in agricultural land, the need for food increases every day. Nowadays, breeding studies are carried out to increase the yield of plants to get more products from the same area. Furthermore, controlled production areas are created by optimizing climatic conditions and the continuity of production is ensured. It is called greenhouse, where production can be carried out throughout the year and the indoor temperature and humidity conditions can be controlled. Nowadays, greenhouses are now functioning as an industrial enterprise. However, greenhouses need to comply with the principles of quality production, efficient income growth and physical environmental protection. Almost all of the plant production in greenhouses in Turkey is done in the Mediterranean region, but in the Southeastern Anatolia Region, it is done in a very limited greenhouse area. The increase of protected agricultural areas in the Mediterranean region and the fact that the production volume cannot reach a certain limit makes it necessary to investigate alternative protected production areas. In this study, climate conditions of Antalya province and climate data of four provinces of the Lower Euphrates basin are compared with each other and statistically compared. As a result of, differences have been found between Antalya province and the provinces in the Lower Euphrates basin in terms of minimum, maximum, and average temperatures. However, there is no difference between the provinces in the basin except for Gaziantep in terms of climatic conditions. Therefore, it has been determined that Gaziantep province is not suitable for greenhouse cultivation. However, it has been concluded that if greenhouse cultivation is performed in this province, it is appropriate to perform cultivation in the areas where alternative energy sources can be used. It has been concluded that in the case that heating costs are reduced using alternative energy sources, Şanlıurfa and Kilis provinces are climatologically suitable for greenhouse cultivation and Adıyaman province is partially suitable for it.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2017, II/2; 701-714
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Equivalent Heat Load Test on Hot Aircraft Engine Components
Autorzy:
Mróz, Marek
Orłowicz, A. W.
Tupaj, Mirosław
Lenik, Magdalena
Powiązania:
https://bibliotekanauki.pl/articles/27314117.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
heat load
heat barrier
aircraft engine components
obciążenie cieplne
bariera cieplna
elementy silnika samolotu
Opis:
The paper presents the assumptions and methodology for investigating equivalent heat load testing of hot aircraft engine components. The basic heat loads occurring in an aircraft engine during aircraft flight are characterised. Diagrams of the proposed heat loads are presented, together with the number of cycles, and a test bench is characterised and shown to enable equivalent heat load testing of aircraft engine components.
Źródło:
Archives of Foundry Engineering; 2023, 23, 1; 34--36
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Influence and Impact of Bioclimatic Indicators on the Evolution of Biosociety. A Geoarchaeological approach
Autorzy:
Malaperdas, George
Powiązania:
https://bibliotekanauki.pl/articles/1076724.pdf
Data publikacji:
2019
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Archaeology
Aspect
Bioclimatic Indexes
GIS
Geoarchaeology
Heat Load Index
Humidity
Solar Radiation
TWI
Wind Intensity
Opis:
The present paper attempts to attribute the role of bioclimatic indexes and their importance in the development and evolution of cultures. With the aid of GIS, a case study is presented aiming to point out the use of GIS is the study of bioclimatic indexes in theoretical study fields, such as, in this case, in Archaeology and more specifically, in the field of Geoarchaeology. Geoarchaeology is not a discipline, but an interdisciplinary approach, which has everything to gain by taking geomorphological methods and techniques into account (Fouache et al., 2010). Τhe study area is the Prefecture of Messenia, located in south west Greece. The Prefecture of Messenia is one of the best documented areas of mainland Greece. It has been both extensively surveyed and excavated. The archaeological finds are numerous, dating from prehistory to the modern times. Thus, a vast amount of information has helped historians, archaeologists and other scientists to recreate the past.
Źródło:
World News of Natural Sciences; 2019, 24; 183-198
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczne modelowanie mostków cieplnych a projektowe zapotrzebowanie na ciepło w lokalu mieszkalnym
Numerical modelling of thermal bridges versus design heat load in flat
Autorzy:
Werner-Juszczuk, A. J.
Powiązania:
https://bibliotekanauki.pl/articles/404304.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Symulacji Komputerowej
Tematy:
MEB
liniowy współczynnik przenikania ciepła
projektowe obciążenie cieplne
BEM
linear thermal transmittance
design heat load
Opis:
Przedstawiono obliczenia projektowego obciążenia cieplnego w lokalu mieszkalnym w budynku wielorodzinnym w trzech wariantach: z uwzględnieniem przybliżonych wartości współczynników przenikania ciepła liniowych mostków cieplnych wg PN-EN ISO 14683:2008, z uwzględnieniem wartości z katalogu mostków cieplnych oraz przy wykorzystaniu obliczeń numerycznych wykonanych przy użyciu autorskiego programu komputerowego, bazującego na algorytmie metody elementów brzegowych (MEB). Określono wpływ poszczególnych metod na całkowite projektowe straty ciepła w lokalu mieszkalnym.
The results of calculation of design heat load in flat in residential building are presented. Calculation was performed allowing of approximate values of linear thermal transmittance determined with PN-EN ISO 14683:2008, allowing of values from catalogue of thermal bridges and values determined with the use of authoring computer program, basing on boundary element method (BEM) algorithm. The effect of each method on overall design heat loses in flat was determined.
Źródło:
Symulacja w Badaniach i Rozwoju; 2015, 6, 1; 45-56
2081-6154
Pojawia się w:
Symulacja w Badaniach i Rozwoju
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Calorimetric studies of the energy deposition on a material surface by plasma jets generated with QSPA and MPC devices
Autorzy:
Chuvilo, A. A.
Garkusha, I. E.
Makhlaj, V. A.
Petrov, Y. V.
Powiązania:
https://bibliotekanauki.pl/articles/147706.pdf
Data publikacji:
2012
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
quasi steady-state plasma accelerator (QSPA)
energy density
heat load
plasma streams
plasma-surface interaction
Opis:
Studies of the energy deposition by plasma jets incident on a material surface are of topical interest for both the fusion and plasma technology applications. In this paper the results are reported of a comparative study of plasma energy deposition on different material surfaces exposed to plasma jets of various duration and energy density, generated using the QSPA Kh-50 and the MPC devices. The spatial distribution of plasma energy density and the heat load on the surface were measured with a movable calorimeter. The measurements demonstrate that in the case of an exposure to QSPA plasma jets the absorbed heat load is approximately equal to 55-60% of the energy in the incident plasma jet. In the case of plasma jets generated using the MPC device the heat load on the target surface and was practically the same as for the QSPA jets, and additional shielding effects were found to be negligible due to the short duration of plasma jets.
Źródło:
Nukleonika; 2012, 57, 1; 49-53
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of Window Roller Blinds on Energy Consumption in Residential Buildings in Serbia
Autorzy:
Djoković, Jelena M.
Nikolić, Ružica R.
Bokůvka, Otakar
Pastorková, Jana
Powiązania:
https://bibliotekanauki.pl/articles/27323565.pdf
Data publikacji:
2023
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
exterior window blinds
heat load
cooling load
lighting
energy efficiency
rolety zewnętrzne
obciążenie cieplne
obciążenie chłodnicze
oświetlenie
efektywność energetyczna
Opis:
Roller blinds are devices that are retracted and wrapped in a box above the window opening and are used to protect against the solar radiation. Those are the well-known devices with distinct advantages over the fixed external dimming elements. The influence of external blinds on the internal thermal environment in climatic conditions in the Republic of Serbia, the city of Kragujevac, was considered in this research. An external blind was installed in the test room and its influence on the internal temperature was compared with the internal temperature of the room without the blind. Real-time monitoring was carried out in February and August 2023. The results presented in this paper show that the blind reduces the temperature in summer by 3.57ºC and increases it in winter by 1.76ºC. The cooling load can be reduced by about 20%, and the heat load by about 15%.
Źródło:
System Safety : Human - Technical Facility - Environment; 2023, 5, 1; 75-82
2657-5450
Pojawia się w:
System Safety : Human - Technical Facility - Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena wybranych środowiskowych uwarunkowań organizacji pracy ratowników górniczych
Evaluation of selected environmental conditions of work organization of mine rescue workers
Autorzy:
Marszałek, A.
Bartkowiak, G.
Dąbrowska, A.
Krzemińska, S.
Powiązania:
https://bibliotekanauki.pl/articles/202793.pdf
Data publikacji:
2017
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
środowisko gorące
ratownik górniczy
odzież ochronna
obciążenie cieplne
hot environment
rescue miner
protective clothing
heat load
Opis:
Do podstawowych zagrożeń, związanych z pracą ratownika górniczego poza zagrożeniem wybuchem metanu, należą wysoka temperatura i wilgotność powietrza otoczenia, duża masa przenoszonego sprzętu. W artykule przedstawiono wyniki badań przeprowadzonych w warunkach laboratoryjnych dla dwóch wariantów stosowanego przez ratowników ubioru, aparatu ratowniczego i dwóch poziomów temperatury otoczenia. Porównano czas trwania badań do osiągnięcia limitów fizjologicznych temperatury wewnętrznej, częstości skurczów serca, bądź zakończenia badań z powodów subiektywnych. Przedstawiono różnice w intensywności pocenia, gromadzenia potu w odzieży, akumulacji ciepła i subiektywnych ocen wrażeń cielnych przy dwóch poziomach temperatury otoczenia.
High levels of air temperature and humidity, the large mass of the transferred equipment are basic risks beyond the risk of explosion of methane of work-related mining rescuers. The article presents results of a research study conducted in the laboratory for two variants of clothing developed for mining rescuers and one kind of respiratory protective device at two levels of ambient temperature and moderate physical work intensity. A duration of the exercise to achieve the physiological limits of the internal temperature, heart rate or completion of the study because of subjective reasons was compared between studies conducted at two levels of air temperature. Differences in the intensity of sweating, level of sweat accumulated in clothing, heat accumulation and subjective ratings of the thermal state at mentioned variants of environment conditions were also described.
Źródło:
Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie; 2017, 73; 197-211
0239-9415
Pojawia się w:
Zeszyty Naukowe Politechniki Poznańskiej. Organizacja i Zarządzanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zimne środowisko - sposoby zabezpieczenia organizmu człowieka przed oddziaływaniem zimna
A cold environment - its specificity and ways of protecting the human body against the adverse effects of the cold
Autorzy:
Marszałek, A.
Powiązania:
https://bibliotekanauki.pl/articles/181319.pdf
Data publikacji:
2011
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
odzież ochronna
obciążenie cieplne
równowaga cieplna
wychłodzenie organizmu
izolacyjność
protective clothing
heat load
thermal equilibrum
hypothermia
insulation
Opis:
W artykule przedstawiono zasady oceny obciążenia cieplnego człowieka w zimnym środowisku dotyczące zarówno wychłodzenia ogólnego, jak i lokalnego. Opisano też czynniki wpływające na zróżnicowanie wymagań pracowników odnośnie ciepłochronności odzieży ochronnej. Wyszczególniono czynniki pozwalające zachować równowagę cieplną w zimnym środowisku.
This article presents the principles of assessing thermal load in a cold environment. It also discusses why different workers require different thermal insulation of protective clothing. Elements that help to maintain thermal balance in a cold environment are listed.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2011, 10; 18-21
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rozwiązywanie belek o zmiennej sztywności metodą różnic skończonych
Solution of beams of changeable rigidity with use of finite-difference method
Autorzy:
Buczkowski, W.
Powiązania:
https://bibliotekanauki.pl/articles/40704.pdf
Data publikacji:
2009
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
belki o zmiennej sztywnosci
metoda roznic skonczonych
obciazenie cieplne
obliczenia
beam rigidity
computation
finite difference method
heat load
Źródło:
Acta Scientiarum Polonorum. Architectura; 2009, 08, 3-4
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza energochłonności oraz kosztów ogrzewania budynku jednorodzinnego w świetle zmieniających się wymagań prawnych
Analysis of energy consumption and the cost of heating in single-family building in the light of changing legal requirements
Autorzy:
Wichowski, P.
Banaszek, S.
Powiązania:
https://bibliotekanauki.pl/articles/40323.pdf
Data publikacji:
2015
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
domy jednorodzinne
energochlonnosc
wspolczynnik przenikania ciepla
obciazenie cieplne
zapotrzebowanie na cieplo
ogrzewanie
koszty
single-family house
energy consumption
heat transfer coefficient
heat load
heat demand
heating
cost
Opis:
W artykule przedstawiono historię (od 1946 roku do chwili obecnej) przepisów prawnych związanych z ochroną cieplną budynków. Na przykładzie wybranego domu jednorodzinnego wykonano obliczenia obciążenia cieplnego oraz sezonowego zapotrzebowania na ciepło w okresach obowiązywania zmieniających się wymagań dotyczących izolacyjności termicznej przegród budowlanych i energochłonności budynku. Następnie oszacowano koszty ogrzewania analizowanego obiektu spełniającego te wymagania dla poszczególnych okresów. W analizie uwzględnione zostały koszty ogrzewania przy wykorzystaniu węgla, gazu ziemnego, ciepła sieciowego oraz oleju opałowego. Praca kończy się podsumowaniem i wnioskami wyciągniętymi z uzyskanych wyników obliczeń i przeprowadzonej ich analizy.
The article presents the history (since 1946 to present) of legal provisions related to the thermal protection of buildings. On example of a selected one-family house was made calculations of heat load and seasonal heat demand during the periods still changing demands related to thermal insulation of building dividing wall and energy consumption. Then the heating costs for analysed object in individual period were estimated. The analysis included heating costs for the heat which is received from combustion coal, natural gas, heating network and fuel oil. The article ends with a summary and conclusions draw from the calculation results and analysis performed of these results.
Źródło:
Acta Scientiarum Polonorum. Architectura; 2015, 14, 3
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of irradiance and ambient temperature on roof coating temperature and heat flux transferred to interior of building
Autorzy:
Zapałowicz, Z.
Powiązania:
https://bibliotekanauki.pl/articles/95360.pdf
Data publikacji:
2017
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
roof coating material
heat load of building
energy balance
flat roof
materiał pokrycia dachowego
obciążenie cieplne budynku
bilans energetyczny
dach płaski
Opis:
The following article presents an analysis of the influence of the irradiance and ambient temperature on the roof coating temperature. The roof coating temperature depends mainly on the optical properties of the coating material. Those properties are the reflectivity and emissivity. The roof surface temperature determines the heat flux through the roof into the interior of the building. Proper material selection for the coating of the roof can significantly decrease the surface temperature, and as a result, decrease the heat flux into the space just below the roof. During the calculations, the model of the heat exchange derived by the author for the flat roof was used. The paper includes results of heat calculations for two coating materials with different reflectivity coefficients. The calculations were made for the specific weather conditions.
Źródło:
Journal of Mechanical and Energy Engineering; 2017, 1, 1; 107-112
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Istota zagrożenia obciążeniem termicznym : przegląd i analiza obowiązujących przepisów oraz opracowań w zakresie identyfikacji i kwalifikacji zagrożenia klimatycznego pracowników podziemnych zakładów górniczych
The essence of heat load hazard : review and analysis of valid regulations and literature in the realm of identification and qualification of climatic hazard of miners in underground mines
Autorzy:
Słota, Z.
Powiązania:
https://bibliotekanauki.pl/articles/186181.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technik Innowacyjnych EMAG
Tematy:
zagrożenia obciążeniem termicznym
podziemne kopalnie węgla
zagrożenia klimatyczne
bezpieczeństwo pracy
przepisy prawne
heat load hazards
climatic hazards
safety of work
legal regulations
Opis:
W artykule przedstawiono bilans cieplny organizmu człowieka w formie odpowiednich równań i grafik, następnie wyjaśniono istotę obciążenia termicznego oraz przedstawiono czynniki kształtujące warunki klimatyczne w kopalniach głębokich, a także wymieniono najistotniejsze wskaźniki mikroklimatu i warunków klimatycznych. W dalszej jego części dokonano przeglądu i analizy obowiązujących przepisów w zakresie identyfikacji i kwalifikacji zagrożenia klimatycznego. Przedstawiono stan prawny obowiązujący w tym zakresie w Polsce oraz na świecie, między innymi w Republice Federalnej Niemiec, krajach byłego ZSRR, Bułgarii, Belgii, Holandii, Francji, USA, Kanadzie, Australii i Republice Czeskiej.
The article presents the heat balance of a human body in the form of suitable equations and graphics. Then the essence of heat load is explained along with the factors which shape climatic conditions in deep underground mines. The most important microclimatic indexes and climate conditions were listed. In the further part of the article the author reviewed and analyzed valid regulations in the realm of identification and qualification of the climatic hazard, i.e. legal regulations in Poland and other countries, such as Germany, countries of the former Soviet Union, Bulgaria, Belgium, Holland, France, USA, Canada, Australia, and the Czech Republic. In the summary it was pointed out that the 1st stage of the research project had resulted in the publication of both an electronic and paper document, with 80 pages and over 400 references listed, to be used in the next stages of the project.
Źródło:
Mechanizacja i Automatyzacja Górnictwa; 2013, R. 51, nr 2, 2; 15-20
0208-7448
Pojawia się w:
Mechanizacja i Automatyzacja Górnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the accuracy of the approximate method used to estimate the heating power demand for single-family houses
Ocena dokładności metody orientacyjnej służącej do szacowania zapotrzebowania na moc do ogrzewania budynków mieszkalnych jednorodzinnych
Autorzy:
Szul, T.
Powiązania:
https://bibliotekanauki.pl/articles/337659.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
single-family residential buildings
demand for heating power
design heat load
budynki mieszkalne jednorodzinne
zapotrzebowanie na moc do ogrzewania
projektowe obciążenie cieplne
Opis:
Total design heat load as well as the approximate method based on the thermal characteristics of the building were determined in accordance with the PN-EN 12831 standard for 84 randomly selected single-family residential buildings located in rural areas. Calculations were carried out to assess the accuracy of the approximate method for estimating the heating power demand for single-family houses, as compared to the detailed method, and allowed to determine the Mean Absolute Error (MAE) which is 1.1 kW and the Mean Absolute Percentage Error MAPE which is approx. 10% for the analyzed group of buildings. The resulting error values form grounds to the declaration that in absence of construction documentation the approximate method provides good results when estimating the demand for power for heating buildings.
Dla 84 losowo wybranych budynków mieszkalnych jednorodzinnych, znajdujących się na obszarach wiejskich, wyznaczono całkowite projektowe obciążenie cieplne zgodnie z normą PN-EN 12831, a także metodą orientacyjną bazującą na charakterystyce cieplnej budynku. Przeprowadzone obliczenia mające na celu ocenę dokładności metody orientacyjnej, służącej do szacowania zapotrzebowania na moc do ogrzewania budynków mieszkalnych jednorodzinnych w porównaniu z metodą szczegółową, pozwoliły określić wartości średniego błędu bezwzględnego MAE, który wynosi 1,1 kW oraz średniego bezwzględnego błędu procentowego MAPE, który dla analizowanej grupy budynków wynosi ok. 10%. Otrzymane wartości błędów dają podstawę do twierdzenia, że w przypadku braku dokumentacji budowlanej metoda orientacyjna daje dobre rezultaty przy szacowaniu zapotrzebowania na moc do ogrzewania budynków.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2018, 63, 1; 126-129
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza pracy statycznej zbiornika prostopadłościennego poddanego działaniu temperatury
Analisys of static work rectangular tank under load of temperature
Autorzy:
Buczkowski, W.
Czajka, S.
Pawlak, T.
Powiązania:
https://bibliotekanauki.pl/articles/40096.pdf
Data publikacji:
2006
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
metoda roznic skonczonych
momenty zginajace
obciazenia hydrostatyczne
obciazenie cieplne
obliczenia
praca statyczna
zbiorniki otwarte
zbiorniki prostopadloscienne
bending moment
computation
cuboidal tank
finite difference method
heat load
hydrostatic load
open tank
static work
Źródło:
Acta Scientiarum Polonorum. Architectura; 2006, 05, 2
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ różnej grubości i konstrukcji ścian na pracę statyczną monolitycznych zbiorników prostopadłościennych
The influence of the different thickness and the construction of walls on the static works perpendicular monolithic tanks
Autorzy:
Buczkowski, W.
Szymczak-Graczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/40184.pdf
Data publikacji:
2008
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
grubosc sciany
konstrukcje scian
metoda roznic skonczonych
obciazenie cieplne
obliczenia
praca statyczna
zbiorniki prostopadloscienne
computation
cuboidal tank
finite difference method
heat load
static work
wall construction
wall thickness
Źródło:
Acta Scientiarum Polonorum. Architectura; 2008, 07, 3
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of the heat load in the piston of turbo diesel engine - continuation
Modelowanie obciążeń cieplnych tłoka doładowanego silnika ZS - kontynuacja
Autorzy:
Gustof, P.
Hornik, A.
Jędrusik, D.
Powiązania:
https://bibliotekanauki.pl/articles/374585.pdf
Data publikacji:
2007
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
silnik z zapłonem samoczynnym
obciążenie cieplne silnika
COSMOS/M
metoda warunków brzegowych
metoda elementów skończonych
turbo diesel engine
heat load in engine
boundary conditions method
finite elements method
Opis:
In this study the mathematical description of characteristic surfaces of the heat exchange of the piston and temperature distribution of the turbo diesel engine at the beginning phase its work was presented. The computations were performed by means of the two-zone combustion model, the boundary conditions of III kind and the finite elements method (MES) by using of COSMOS/M program.
W niniejszym artykule przedstawiono matematyczny opis charakterystycznych powierzchni wymiany ciepła tłoka oraz rozkład ich temperatury dla doładowanego silnika, z zapłonem samoczynnym w początkowej fazie jego pracy. Obliczenia numeryczne zostały przeprowadzone przy zastosowaniu dwustrefowego modelu procesu spalania [1], warunków brzegowych III rodzaju oraz metody elementów skończonych (MES), za pomocą programu COSMOS/M.
Źródło:
Transport Problems; 2007, 2, 4; 81-86
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena poprawności doboru mocy grzejników w instalacjach z gazowymi źródłami ciepła w budynkach jednorodzinnych
Assessment of the correctness of power of radiators in systems with gas heat sources in residential buildings
Autorzy:
Szul, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/882864.pdf
Data publikacji:
2019-09-05
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
domy jednorodzinne
projektowanie
obciazenie cieplne
kotly gazowe
grzejniki plytowe stalowe
grzejniki czlonowe aluminiowe
potrzeby cieplne
design heat load building's premises
gas boilers
steel panel radiators
aluminium radiator heaters
thermal needs of buildings
Opis:
W pracy opisano badania wykonane na grupie 57 budynków jednorodzinnych, w których dokonano konwersji źródła cie-pła na gazowe wraz z wymianą grzejników. Badania miały na celu sprawdzenie dostosowania mocy zainstalowanych grzejników do potrzeb cieplnych obiektów. W celu określenia popytu na ciepło dla każdego z budynków wykonano obliczenia zapotrzebowania na moc do ogrzewania, obliczono moc grzejników w zależności od rodzaju zastosowanego kotła gazowego (zwykły lub kondensacyjny), a następnie porównano z mocą grzejników, które były zainstalowane w poszczególnych budynkach. Pozwoliło to na ocenę poprawności doboru mocy grzejników w zależności od temperatur zasilania grzejników w poszczególnych instalacjach. Na podstawie przeprowadzonych obliczeń stwierdzono, że grzejniki były stosunkowo dobrze dobrane w budynkach z instalacjami, gdzie źródłem ciepła były kotły gazowe zwykłe (z zamkniętą lub otwartą komorą spalania), natomiast w przypadku budynków, w których zainstalowano kotły gazowe kondensacyjne, sto-pień dopasowania wynosił 0,6, a zatem grzejniki były niedowymiarowane, tzn. że powierzchnia oddawania ciepła jest zbyt mała i niedostosowana do potrzeb cieplnych budynków oraz parametrów pracy instalacji grzewczej.
The study describes tests carried out on a group of 57 single-family residential buildings in which the heat source was converted into gas with the replacement of radiators. The tests were aimed at checking the adaptation of the installed heaters' capacity to the needs of thermal of buildings. In order to determine the demand for heat, for each building calcu-lations were made for the demand for heating power, the power of the heaters was calculated depending on the type of gas boiler used (ordinary or condensing) and then compared with the power of radiators that are installed in individual buildings. This allowed to assess the correctness of the power selection of radiators depending on the supply temperatures of radiators in individual installations. Based on the calculations performed, it was found that radiators are relatively well selected in buildings with installations where the heat source is ordinary gas boilers (with closed or open combus-tion chamber), while for buildings in which gas condensing boilers are installed, the degree of fit is 0.6 and thus the radi-ators are too small - the heat dissipation surface is not adapted to the thermal needs of buildings and the parameters of the heating installation.
Źródło:
Technika Rolnicza Ogrodnicza Leśna; 2019, 3; 23-27
1732-1719
2719-4221
Pojawia się w:
Technika Rolnicza Ogrodnicza Leśna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical investigations of effect of indoor air quality on thermal comfort in residential buildings
Autorzy:
Krzaczek, M.
Tejchman, J
Powiązania:
https://bibliotekanauki.pl/articles/231320.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
budynek mieszkalny
jakość powietrza wewnętrznego
stężenie CO2
komfort cieplny
CFD
strefa oddychania osobista
obciążenie cieplne
wentylacja naturalna
residential building
indoor air quality
CO2 concentration
thermal comfort
personal breathing zone
heat load
natural ventilation
Opis:
The influence of the CO2 concentration in a local air zone in naturally ventilated residential houses on the residents’ behaviour was numerically investigated. A numerical two-dimensional CFD model of the indoor zone based on experiments performed by the authors was used. Different resident locations in the fluid domain and different inlet velocities imposed by wind were considered in simulations. The overall thermal comfort and IAQ indices were also calculated. The investigations results show that in contrast to the overall air quality, the local CO2 was strongly dependent upon the resident location, fresh air inlet velocity and ventilation system type.
Źródło:
Archives of Civil Engineering; 2014, 60, 1; 91-121
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Plyty prostokatne o skokowo zmiennej grubosci obciazone temperatura
Rectangle plates with leap variable thickness expanding temperature load
Autorzy:
Szymczak-Graczyk, A.
Powiązania:
https://bibliotekanauki.pl/articles/40670.pdf
Data publikacji:
2007
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
badania modelowe
praca statyczna
grubosc zmienna skokowo
analiza numeryczna
plyty prostokatne
metoda roznic skonczonych
obciazenie cieplne
konstrukcje inzynierskie
engineering construction
finite difference method
heat load
leap variable thickness
model research
numerical analysis
rectangular plate
static work
Źródło:
Acta Scientiarum Polonorum. Architectura; 2007, 06, 4; 33-43
1644-0633
Pojawia się w:
Acta Scientiarum Polonorum. Architectura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Friction heating and stress-strain state of ventilated disc brakes
Autorzy:
Holenko, Kostyantyn
Dykha, Oleksandr
Babak, Oleg
Posonskiy, Sergiy
Powiązania:
https://bibliotekanauki.pl/articles/2204250.pdf
Data publikacji:
2023
Wydawca:
Fundacja Centrum Badań Socjologicznych
Tematy:
brake discs
thermal load
stress-strain state
safety
stress
heat flow
Opis:
This paper describes the study of ventilated car disc brakes stress-strain conditions and friction under the pressure using the ANSYS environment. Such influencing factors are taken into account in the course of research as angular speed value, the pressure of the pads on the disk, the nature of the load application, convection, thermal expansion, etc. Computer modelling of the stress field and the transient thermal field in the area of contact between the pads and the disk is provided by the method of sequential thermostructural communication of the intermediate states of the brake model directly in the ANSYS Coupled Field Transient environment. Besides, the ANSYS calculations were also performed based on the primitive assembly model of two steel blocks (the discrepancy was less than 3%) to determine the identity of the theoretical knowledge about the heating of bodies as a result of the work to overcome frictional forces. Finally, a high level of calculation results convergence by analytical formulas and computer modelling was established. Since this approach justified itself, its principles were taken as a basis in the calculations of ventilated disc brakes of cars, which significantly facilitates their application, knowing the area of the active part of the disc (the rest of the boundary conditions are typical and correspond to the normal operating modes of the vehicle).
Źródło:
Journal of Sustainable Development of Transport and Logistics; 2023, 8, 1; 43--52
2520-2979
Pojawia się w:
Journal of Sustainable Development of Transport and Logistics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the Possibility of Introducing a Cogeneration System in the Biogas Development Process by the Example of the Wastewater Treatment Plant Located in Rybnik Orzepowice
Ocena możliwości wprowadzenia układu kogeneracji w procesie zagospodarowania biogazu na przykładzie oczyszczalni ścieków w Rybniku Orzepowicach
Autorzy:
Karwot, Janusz
Bondaruk, Jan
Zawartka, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/1811646.pdf
Data publikacji:
2020
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
biogas
cogeneration
heat
electricity
COD load
BZT5 load
biogaz
kogeneracja
ciepło
energia elektryczna
ładunek ChZT
ładunek BZT5
Opis:
The paper presents and discusses the 6-year effects of the operation of a biogas-fired cogeneration system which operates at the Rybnik Orzepowice sewage treatment plant. The qualitative composition of biogas, average daily amount of biogas produced, total demand of the sewage treatment plant for electricity and the amount of electricity obtained from biogas were presented. Regarding the average daily biogas production for the years 2013–2018, it can be stated that it remains at the level of 2,809 m3/d (±33%). The average daily total electricity consumption for 2013-2018 remains at 8,846 kWh/d (-13.8%; +20.6%). The average daily amount of electricity produced from biogas for the years 2013-2018 remains at the level of 3,892 kWh/d (-38.7%; +10.1%). Electricity generated from biogas allows us to cover the demand of the treatment plant at 44% (minimum 39%, maximum 50%). In the analysed period, biogas consumption by individual facilities was: cogeneration unit approx. 65%, boilers: 10%, flare: 25%. Based on the operational data, it was calculated that: the unit indicator for biogas extraction from sewage, on average is 0,1584 mn3/m3 (min. 0,0937 mn3/m3, max.: 0,2291 mn3/m3), the unit indicator for biogas extraction in relation to for COD load an average of 0.22 m3of biogas/kg COD (min. 0.09 m3of biogas/kg COD, max. 0.47 m3of biogas/kg COD), the unit ratio of biogas extraction in relation to the BZT5 load was on average 0.61 m3biogas/kg BZT5 (min. 0.28 m3biogas/kg BZT5, max. 1.20 m3biogas/kg BZT5).
W artykule przedstawiono i omówiono 6-cio letnie efekty pracy układu kogeneracyjnego zasilanego biogazem, który pracuje w Oczyszczalni Ścieków Rybnik Orzepowice. Zaprezentowano skład jakościowy biogazu, średniodobową ilość wytwarzanego biogazu, całkowite zapotrzebowanie oczyszczalni na energię elektryczną oraz ilość energii elektrycznej uzyskiwanej z biogazu. Średniodobowa produkcji biogazu, za lata 2013-2018 można stwierdzić, że utrzymuje się ona na poziomie 2,809 m3/d (±33%). Średniodobowe całkowite zużycie energii elektrycznej za lata 2013–2018, utrzymuje się on poziomie 8,846 kWh/d (-13,8%; +20,6%). Średniodobowa ilość produkowanej energii, energii elektrycznej z biogazu za lata 2013–2018 utrzymuje się on poziomie 3,892 kWh/d (-38,7%; +10,1%). Energia elektryczna wytwarzana z biogazu pozwala na pokrycie zapotrzebowania oczyszczalni na poziomie 44% (minimalnie 39%, maksymalnie 50%). W analizowanym okresie zużycie biogazu przez poszczególne obiekty wynosiło: jednostka kogeneracyjna ok. 65%, kotły: 10%, pochodnia: 25%. Na podstawie danych eksploatacyjnych obliczono, że: jednostkowy wskaźnik pozyskania biogazu ze ścieków, średnio wynosi 0,1584 mn3/m3 (min. 0,0937 mn3/m3, max.: 0,2291 mn3/m3), jednostkowy wskaźnik pozyskania biogazu w odniesieniu do ładunku ChZT średnio wynosił 0,22 m3 biogazu/kg ChZT (min. 0,09 m3 biogazu/kg ChZT, max. 0,47 m3 biogazu/kg ChZT), jednostkowy wskaźnik pozyskania biogazu w odniesieniu do ładunku BZT5 średnio wynosił 0,61 m3 biogazu/kg BZT5 (min. 0,28 m3 biogazu/kg BZT5 w, max. 1,20 m3 biogazu/kg BZT5).
Źródło:
Rocznik Ochrona Środowiska; 2020, Tom 22, cz. 2; 1116-1131
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Enhancing the Strength of Al/Mg Dissimilar Friction Stir Lap Welded Joint by Zn Filler Addition Combined with an Appropriate Heat Input
Autorzy:
Zhao, Huaxia
Gong, Peng
Ji, Shude
Gong, Xue
Powiązania:
https://bibliotekanauki.pl/articles/2048795.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
friction stir lap welding
Al/Mg dissimilar alloys
Zn filler
heat input
tensile shear load
Opis:
7075-T6 Al and AZ31B Mg dissimilar alloys were friction stir lap welded with or without a Zn filler, and the effect of heat input on the joint quality was systematically studied. The experimental and finite element simulation results displayed that the formation characteristics and microstructures of the joint with or without the Zn filler were significantly affected by the heat input. The tensile shear load of joint with or without the Zn filler increased first and then decreased with the decrease of the welding speed from 200 to 50 mm/min. Moreover, the peak temperature in the stir zone was significantly decreased by the Zn filler addition, and the high temperature zone narrowed along the plate thickness direction. These changes of heat input made that longer mixing region boundary length and larger effective lap width were attained as the Zn filler was used. In addition, due to the replacement of Al-Mg intermetallic compounds (IMCs) by Al-Mg-Zn and Mg-Zn IMCs which were less harmful to the joint, the tensile shear load of the joint with the Zn filler was obviously enhanced compared to that of the joint without the Zn filler at each welding speed. The maximum tensile shear load of 7.2 kN was obtained at the welding speed of 100 mm/min.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 1; 137-146
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Free vibrations of the column taking into account compressive and thermal load
Autorzy:
Uzny, Sebastian
Kutrowski, Łukasz
Skrzypczak, Tomasz
Powiązania:
https://bibliotekanauki.pl/articles/127746.pdf
Data publikacji:
2019
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
free vibrations
Euler’s load
heat source
column
drgania swobodne
obciążenie Eulera
źródło ciepła
słup
Opis:
Free vibrations of slender systems are the subject of many scientific and research works. In this work, the boundary problem of free vibrations of a compressed column, which is additionally heat loaded, is considered. The issue of heat flow in the column is solved using the Finite Element Method. Averaged distribution of material properties is obtained in individual segments of the column in subsequent heating times. The mathematical model of free vibrations takes into account the thermal expansion of the material and the effect of changing the Young's modulus resulting from the effect of heat load. The boundary problem of the free vibrations of the considered system is limited to the linear range (the linear component of natural frequency is considered). The influence of the heat source exposure time on the course of characteristic curves (on the plane: load – natural frequency) is determined. The results are presented for various column diameters.
Źródło:
Vibrations in Physical Systems; 2019, 30, 2; 1-8
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metodyka wyznaczania strat cieplnych i obciążeń termicznych w falownikach trakcyjnych
Metodology for determination of the a heart losses and thermal loads in traction invertes
Autorzy:
Biliński, J.
Łagosz, M.
Powiązania:
https://bibliotekanauki.pl/articles/249906.pdf
Data publikacji:
2016
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
falownik trakcyjny
obciążenie termiczne
straty cieplne
trakcyjny układ napędowy
traction inverter
thermal load
heat loss
traction drive system
Opis:
W artykule przedstawiono zasady określania strat ciepła w przetwornicach trakcyjnych metodą TLV i symulację prób zmian temperatury w przetwornicy trakcyjnej podczas teoretycznego przejazdu pociągu. Przejazd teoretyczny składał się z cyklu rozruchu, jazdy, hamowania i zatrzymywania. Wyniki przedstawiono na wykresach dla różnych parametrów modelu cieplnego. Przeprowadzone modelowanie potwierdziło poprawność zastosowanej metody ustalenia strat cieplnych i obciążeń termicznych przekształtnika trakcyjnego. Przedstawione wyniki wskazują, jak ważna jest znajomość zjawisk towarzyszących. Pozwala ona dobrać prędkość, przy której napęd osiąga optymalną efektywność. Nowoczesne metody symulacji pozwalają na uzyskiwanie efektów w relatywnie krótkim czasie.
This paper presents the principles for determination of heat losses in traction inverters using TLV method and a sample simulation of temperature variation in the traction inverter during the theoretical test run of the train. The theoretical test run consisted of start-up, driving, braking and stopping cycles. The results are shown in the graphs with particular parameters of the thermal model. Modeling confirmed the correct methodology applied to determine the heat losses and thermal loads in the solid state traction power inverter. The paper shows selected aspects of losses of traction drive systems, indicates how important is awareness of accompanying phenomena. This knowledge allows recommending operational speed at which the drive is achieving maximum efficiency. Modern simulation methods can produce results in a relatively short time and at a high confidence level, assuming proper selection of the initial parameters of the system, modeling methods and ability to interpret the results.
Źródło:
TTS Technika Transportu Szynowego; 2016, 12; 24-27
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numeryczna analiza wymiany ciepła w cylindrze dwusuwowego silnika okrętowego
Numerical analysis of heat transfer in cylinder of a marine two-stroke engine
Autorzy:
Wolff, A.
Powiązania:
https://bibliotekanauki.pl/articles/133843.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silniki okrętowe
wymiana ciepła
konwekcja
obciążenia cieplne tulei cylindrowej
marine engines
heat transfer
convection
thermal load of cylinder liner
Opis:
W artykule przedstawiono analizę procesu wymiany ciepła w cylindrze dwusuwowego silnika okrętowego o długim skoku tłoka. Wykorzystano obliczenia termodynamiczno-przepływowe CFD cyklu pracy silnika w dotyczące komory spalania oraz w objętości pod tłokiem, które udostępnił ośrodek konstrukcyjny silników okrętowych „Wärtsilä” w Szwajcarii. Opracowano program komputerowy do wyznaczania uśrednionych w cyklu pracy silnika rozkładów współczynnika przejmowania ciepła, temperatury gazu i gęstości strumienia ciepła wzdłuż tworzącej cylindra. W artykule przedstawiono porównanie wspomnianych rozkładów uzyskanych z użyciem obliczeń CFD oraz formuł empirycznych Woschniego, względnie Bulatiego. Opracowane metody obliczeń mogą być wykorzystane do wyznaczania maksymalnych wartości temperatur i ich gradientów, a w konsekwencji naprężeń termicznych i odkształceń elementów komory spalania silnika, a w szczególności tulei cylindrowej.
In the paper an analysis of the heat transfer in cylinder of a long-stroke marine engine was presented. For this purpose CFD results of thermal and flow processes during engine cycle in combustion chamber and under piston were applied. They were made available to the author by the marine engine designing centre ”Wärtsilä” in Switzerland. A special computer program was developed for calculation of engine cycle averaged distributions of heat transfer coefficient, gas temperature and heat flux along the cylinder liner. In the paper an appropriate comparison between these distributions obtained by the use of CFD results and based on empirical equations of Woschni or Bulaty was presented. The developed calculation methods can be utilized for evaluation of maximal temperatures and their gradients, and thus thermal stresses and deformations of combustion chamber parts of an engine, in particular of the cylinder liner.
Źródło:
Combustion Engines; 2015, 54, 3; 849-857
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies