Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "heat exchange" wg kryterium: Temat


Tytuł:
Sezonowy przebieg wskaźnika wykorzystania wody (WUE) w lesie sosnowym
Seasonal Water Use Efficiency (WUE) Index Course in Pine Forest
Autorzy:
Ziemblińska, K.
Urbaniak, M.
Danielewska, A.
Baran, M.
Juszczak, R.
Chojnicki, B. H.
Olejnik, J.
Powiązania:
https://bibliotekanauki.pl/articles/1819204.pdf
Data publikacji:
2013
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
wykorzystanie wody
lasy sosnowe
flux measurements
carbon
exchange
canopy
heat
Opis:
Assessment of the ecosystem productivity in relation to the amount of water used for such kind of processes have already been investigated for the different ecosystem types by many researchers. Water Use Efficiency (WUE) parameter shows seasonal variation due to changing weather conditions, which determine processes of photosynthesis, respiration and evapotranspiration, and because of biological factors variability. The analysis of the WUE dynamics in the forest ecosystem in Tuczno research station over the hydrological year 2012 were presented in the paper. WUE was calculated based on the daily CO2 and H CO2 O fluxes measured by means of the eddy covariance system (EC) installed over the forest canopy. The fluxes were quality checked in relation to the wind direction, friction velocity values and stationary. The data series used in this investigation were not gap-filled. By using the net value of both fluxes, a good indicator which describe the behavior of the ecosystem as the whole, was obtained. Among a number of weather condition factors, that affect the value of the tested indicator (WUE), mainly photosynthetic photon flux density (PPFD) and the air temperature were evaluated. Separate analysis has been done for daily courses of both CO2 and H2 O fluxes, as well as for WUE for each month of the analyzed period. The highest values of H2 O fluxes (FH) were observed in May and June (0.25 and 0.3 kg m-2s-1) and the lowest in the period from September to December (0.02–0.05 kg m-2s-1). The daily courses of water vapor fluxes revealed dependence to the measured PPFD fluxes, which determines in turn the intensity of the evapotranspiration process. The time courses of the daily 30-min average carbon dioxide fluxes (FC) were also highly variable in each month, similarly to the variances of the FH fluxes. The lowest values of the net F COC were measured in the period from October to December (net CO2 fluxes did not exceed 0.55g m-2 s-1), while in the period from April to July the net ecosystem productivity was the biggest (1.5–2.0 m-2s-1),). WUE reached its minimum in May (7 g [CO2] kg-1), [H2O]), what indicates that the evapotranspiration of the ecosystem was the least effective from the point of view of COCOD absorption from the atmosphere (the ecosystem had a high productivity but it lost a great amount of water at the same time). In contrary, higher WUE values were observed in the colder period of the year, when the amount of available radiant energy was limited. WUE reached its peak in September (nearly 45 g of [CO2] kg-1), [H2O] ) which reveals, that in autumn the decline of evapotranspiration rates were higher than rates of the net CO2 exchange decrease. It also highlights the high adaptability of Scots pine (main species in studied forest ecosystem – 99%), to described conditions. The designated water use efficiency (WUE) parameter, may be used as a good indicator of the current condition of the ecosystem.
Źródło:
Rocznik Ochrona Środowiska; 2013, Tom 15, cz. 3; 2780-2798
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wymiana ciepła między wodą w basenach do kontrolowanego chowu ryb ciepłolubnych a otoczeniem
The heat exchange between water in pools for the controlled breeding of warmth-like fish and surroundings
Autorzy:
Żelazny, H.
Powiązania:
https://bibliotekanauki.pl/articles/290961.pdf
Data publikacji:
2007
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
ryba
chów kontrolowany
basen
wymiana ciepła
fish
pool
heat exchange
breeding
Opis:
Celem pracy była ocena skali zjawiska wymiany ciepła drogą przewodzenia oraz ciepła suchego przenoszonego na skutek konwekcji i radiacji miedzy wodą w basenach do kontrolowanego chowu ryb ciepłolubnych a otoczeniem w istniejących obiektach fermowych. Strumienie ciepła określono metodą obliczeniową na podstawie pomiarów temperatury wody basenowej oraz parametrów powietrza wewnętrznego w czterech pomieszczeniach produkcyjnych. W trzech słabo ogrzewanych wnętrzach stwierdzono niewielkie straty ciepła z basenów na skutek przenikania przez ściany zbiorników, a w dwóch przypadkach straty konwekcyjnego ciepła suchego z powierzchni wody. W budynku o znacznie podwyższonej temperaturze powietrza strumień ciepła suchego i strumień ciepła przewodzenia przepływały w kierunku odwrotnym, to jest od otoczenia do basenów.
The aim of work was the opinion about phenomenon scale of the heat exchange by conduction and the dry heat transferred in result of convection and radiation between water in pools for the controlled breeding of fish and the surrounding in existing breeding objects. Streams of warmth was determined by the computational method on the basis of measurements of pool water temperature and parameters of internal air in four production rooms. There were affirmed that in three faintly heating rooms were small losses of the heat from pools as a result of the penetration through walls of reservoirs and in two cases there were losses of the convective dry heat from the surface of water. In the building with considerably increased air temperature the streams of dry heat and conduction run in opposite direction, from surroundings to pools.
Źródło:
Inżynieria Rolnicza; 2007, R. 11, nr 9 (97), 9 (97); 289-295
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Lingwistyczny model procesów zachodzących w szklarni
Linguistic model of processes taking place in a greenhouse
Autorzy:
Wachowicz, E.
Powiązania:
https://bibliotekanauki.pl/articles/287522.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
modelowanie lingwistyczne
szklarnia
wymiana ciepła
wymiana masy
linguistic modelling
greenhouse
heat exchange
mass exchange
Opis:
W pracy omówiono lingwistyczny model procesów wymiany ciepła i masy zachodzących w szklarni. Model ten może być praktycznie wykorzystany podczas predykcyjnego lub adaptacyjnego sterowania mikroklimatem w szklarni. Komputerowe symulacje przebiegu procesów przeprowadzono z wykorzystaniem pakietu programowego MATLAB.
The paper presents linguistic model of heat exchange and mass transfer processes taking place in a greenhouse. This model may be used in practice during predictive or adaptive control of greenhouse microclimate. Computer simulations of the processes were performed using the MATLAB software package.
Źródło:
Inżynieria Rolnicza; 2006, R. 10, nr 12(87), 12(87); 527-536
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zbiory rozmyte w sterowaniu mikroklimatem w budynkach rolniczych
Application of fuzzy sets in microclimate control in agricultural buildings
Autorzy:
Wachowicz, E.
Powiązania:
https://bibliotekanauki.pl/articles/286467.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
budynek rolniczy
szklarnia
wymiana ciepła
wymiana masy
modelowanie lingwistyczne
sterowanie mikroklimatem
agricultural buildings
greenhouse
heat exchange
mass exchange
linguistic modelling
microclimate control
Opis:
W artykule przedstawiono możliwości wykorzystania zbiorów rozmytych do modelowania procesów inżynierii rolniczej oraz sterowania mikroklimatem w specjalistycznych budynkach rolniczych. Opisano przykładowo lingwistyczny model procesów wymiany ciepła i masy oraz system adaptacyjnego sterowania mikroklimatem w szklarni.
The article presents possibilities of application of fuzzy sets in modelling agricultural engineering processes and microclimate control in specialistic agricultural buildings. An exemplary linguistic model of heat and mass exchange processes and a microclimate adaptive control system in a greenhouse were described.
Źródło:
Inżynieria Rolnicza; 2011, R. 15, nr 6, 6; 265-270
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improvement of energy efficiency and environmental safety of thermal energy through the implementation of contact energy exchange processes
Autorzy:
Varlamov, G. B.
Romanova, K. A.
Nazarova, I.
Daschenko, O.
Kapustiansky, A.
Powiązania:
https://bibliotekanauki.pl/articles/240126.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
thermal efficiency
heat generator
energy consumption
contact hydrogen
contact energy exchange
sprawność cieplna
generator ciepła
zużycie energii
Opis:
Energy efficiency improvement and ecological safety of heat power plants are urgent problems, which require scientifically grounded approaches and solutions. These problems can be solved partly within the presented heat-and-power cycles by including contact energy exchange equipment in the circuits of existing installations. A significant positive effectis obtained in the contact energy exchange installations, such as gas-steam installation ‘Aquarius’ and the contact hydrogen heat generator that also can use hydrogen as a fuel. In these plants, the efficiency increases approximately by 10–12% in comparison with traditional installations, and the concentration of toxic substances, such as nitrogen oxides and carbon monoxide in flue gas can be reduced to 30 mg/m3 and to 5 mg/m3, respectively. Moreover, the plants additionally ‘generate’ the clean water, which can be used for technical purposes.
Źródło:
Archives of Thermodynamics; 2017, 38, 4; 127--137
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cooling and heating of the fluid in the cylindrical volume
Autorzy:
Tkachenko, Stanislav
Vlasenko, Olha
Rezydent, Nataliia
Stepanov, Dmytro
Stepanova, Nataliia
Powiązania:
https://bibliotekanauki.pl/articles/2142869.pdf
Data publikacji:
2022
Wydawca:
Centrum Badań i Innowacji Pro-Akademia
Tematy:
non-stationary heat exchange
regular thermal mode
cooling rate
heating rate
heat transfer coefficient
uneven temperatures distribution coefficient
niestacjonarna wymiana ciepła
zwykły tryb termiczny
szybkość chłodzenia
szybkość ogrzewania
współczynnik przenikania ciepła
współczynnik rozkładu temperatur
Opis:
Experimental studies of the non-stationary heat exchange in the system «environment I – body II» have been carried out. It is established that in the body II, which consists of the fluid and thin-walled metal envelope, the characteristic features of the regular thermal mode occur, i.e., cooling (heating) rate of the body II- m = const; heat transfer coefficient between the water (environment I) and body II is practically stable α1 = const; uneven temperatures distribution coefficient in the body II ψ = const. This new notion of the heat transfer regularities in the body II is planned to apply for further development of the experimental-calculation method for the forecasting of the heat exchange intensity in the compound fluid media with limited information regarding thermophysical and rheological properties.
Źródło:
Acta Innovations; 2022, 42; 15-26
2300-5599
Pojawia się w:
Acta Innovations
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of rime icing and its effects on aerodynamic characteristics of an airfoil
Autorzy:
Sznajder, J.
Powiązania:
https://bibliotekanauki.pl/articles/243475.pdf
Data publikacji:
2018
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
computational fluid dynamics
aerodynamics
two-phase flow
simulation of ice accretion
heat exchange
aircraft engineering
transport
vehicle
Opis:
A mathematical model for simulation of icing dedicated to simulation of ice accretion and its effects on aircraft aerodynamic characteristics in conditions of rime icing is presented. Pure rime icing occurs at lower temperatures than glaze icing and results in higher roughness of the surface of deposited ice. The model accounts for increased surface roughness, in terms of equivalent sand grain roughness, caused by deposited rime ice, which influences generation and dispersion of heat in the boundary layer. Increase of surface roughness is determined by analytical models created upon experimental data obtained in icing wind tunnels. Increased generation of heat is a result of increased tangential stress on the surface and is quantified in the temperature recovery factor determined numerically by a CFD solver. Effects of surface roughness on the intensity of forced convection are quantified by application of Colburn analogy between heat and momentum transfer in the boundary layer, which allows assessment of heat transfer coefficient for known friction coefficient, determined by CFD. The computational method includes determination of the surface distribution of mass of captured water in icing conditions. The model of freezing of captured water accounts for generation of heat due to latent heat of captured water droplets, temperature recovery in boundary layer and kinetic energy of captured droplets. The sinks of heat include forced convection, heating of super cooled droplets, conduction of heat through the ice layer and sublimation. The mathematical model is implemented as user-defined function module in ANSYS Fluent solver. The results include effects of deposited ice, including increased surface roughness on aerodynamic characteristics of an airfoil.
Źródło:
Journal of KONES; 2018, 25, 3; 437-443
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A simplified model of parasitic radiation in IR bolometer camera
Autorzy:
Strąkowski, R.
Więcek, B.
Powiązania:
https://bibliotekanauki.pl/articles/973071.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
radiation model
configuration factor
uncooled camera
residual non uniformity
heat exchange
Opis:
This article presents the impact of thermal radiation of the internal elements of the camera on temperature and its distribution on the bolometers of the Focal Plane Array. In order to estimate the effect of this component, a simplified radiation heat transfer model was created for the detector, the object and the camera housing. The model is based on the known term of radiation configuration factors. It was also suggested to use a radiation screen to isolate the detector from the influence of the camera housing. Finally, results of numerical simulations for different camera work conditions are presented.
Źródło:
Measurement Automation Monitoring; 2017, 63, 3; 94-97
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie wymiany ciepła podczas wrzenia w przepływie FC-72 w minikanałach przy użyciu termowizji i termografii ciekłokrystalicznej
A study of flow boiling FC-72 in minichannel by using infrared thermography and liquid crystal thermography
Autorzy:
Strąk, K.
Piasecka, M.
Powiązania:
https://bibliotekanauki.pl/articles/253536.pdf
Data publikacji:
2015
Wydawca:
Instytut Naukowo-Wydawniczy TTS
Tematy:
wymiana ciepła
termografia ciekłokrystaliczna
termowizja
przejmowanie ciepła
płyn FC-72
heat exchange
liquid crystal thermography
thermography
heat transfer
FC-72 fluid
Opis:
W artykule wyznaczono współczynnik przejmowania ciepła w badaniach wymiany ciepła podczas przepływu płynu chłodniczego FC-72 przez dwa pionowe, równoległe minikanały ogrzewane asymetrycznie. Temperaturę powierzchni grzejnej i płyty szklanej każdego z kanałów mierzono odpowiednio za pomocą dwóch bezkontaktowych metod pomiaru: termowizji (IRT) i termografii ciekłokrystalicznej (LCT). Na podstawie dostępnej literatury zaprezentowano zastosowanie obu bezstykowych metod pomiaru powierzchni temperatury w badaniach wymiany ciepła. W pracy omówiono stanowisko pomiarowe oraz pokazano uzyskane wyniki pomiarów temperatury powierzchni w formie: termogramów metod: IRT i LCT. Przedstawiono i omówiono uzyskane zależności współczynnika przejmowania ciepła w funkcji długości minikanału podczas zwiększania strumienia ciepła. Zastosowanie obu bezkontaktowych metod pomiaru temperatury pozwoliło na uzyskanie pełniejszych danych pomiarowych, dokładne wyznaczenie ilości ciepła generowanego z folii grzejnej do płyty szklanej, a w efekcie otrzymania bardziej wiarygodnych wartości lokalnego współczynnika przejmowania ciepła.
The article presented calculate heat transfer coefficient on FC-72 flow boiling heat transfer in two parallel asymmetrically heated vertical minichannels. The temperature of the heated foil and glass plate of each channel was measured by applying two methods: infrared thermography (IRT) and liquid crystal thermography (LCT). Based on the available literature demonstrates the use of both the contactless methods for measuring the surface temperature in the study heat transfer. The paper discusses the workstation and the results of the measurements are shown in graphical form as thermographs method: IRT and LCT. Presented and discussed obtained depending on the heat transfer coefficient as a function of the length of minichannel while increasing heat flux. The use of both contactless of taking measurements in the temperature field methods made it possible to obtain a more complete measurement data, accurate determination of the amount of heat generated from the heating foil to a glass plate, and as a result obtain a more reliable value of the local heat transfer coefficient.
Źródło:
TTS Technika Transportu Szynowego; 2015, 12; 1449-1453, CD
1232-3829
2543-5728
Pojawia się w:
TTS Technika Transportu Szynowego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of the calculation results of heat exchange between a single-family building and the ground obtained with the quasi-stationary and 3-d transient models. Part 1: continuous heating mode
Porównanie wyników obliczeń wymiany ciepła jednorodzinnego budynku mieszkalnego z gruntem uzyskanych za pomocą metody quasi-stacjonarnej oraz modelu niestacjonarnego trójwymiarowego. Część I: ogrzewanie ciągłe
Autorzy:
Staszczuk, A.
Powiązania:
https://bibliotekanauki.pl/articles/395987.pdf
Data publikacji:
2012
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
heat transfer via the ground
heat exchange
continuous heating
quasi-stationary calculations
single-family building
wymiana ciepła
wymiana ciepła z gruntem
ogrzewanie ciągłe
obliczenia quasi-stacjonarne
budynek jednorodzinny
Opis:
The paper provides comparative results of calculations of heat exchange between ground and typical residential buildings using simplified (quasi-stationary) and more accurate (transient, three-dimensional) methods. Such characteristics as building’s geometry, basement hollow and construction of ground touching assemblies were considered including continous heating mode. The calculations with simplified methods were conducted in accordance with currently valid norm: PN-EN ISO 13370:2008. Thermal performance of buildings. Heat transfer via the ground. Calculation methods. Comparative estimates concerning transient, 3D, heat flow were performed with computer software WUFI®plus. The differences of heat exchange obtained using more exact and simplified methods have been specified as a result of the analysis.
W artykule przedstawiono porównanie wyników obliczeń wymiany ciepła typowego budynku mieszkalnego z gruntem z zastosowaniem metody quasi-stacjonarnej i metody uwzględniającej w pełni niestacjonarny, trójwymiarowy przepływ ciepła w gruncie. Celem analizy obliczeniowej było określenie wpływu wybranych czynników takich jak: geometria budynku, poziom zagłębienia budynku w gruncie oraz konstrukcja przegród stykających się z gruntem na dokładność obliczeń wymiany ciepła za pomocą metod quasi-stacjonarnych uwzględniając ciągły tryb ogrzewania budynku. Obliczenia z zastosowaniem metody uproszczonej przeprowadzono zgodnie z aktualnie obowiązującą normą: PN-EN ISO 13370:2008. W celu przeprowadzenia szczegółowych obliczeń numerycznych opracowano model wymiany ciepła budynku z termicznym sprzężeniem z gruntem, oparty na metodzie bilansów elementarnych i stanowiący integralną część programu komputerowego “WUFI®plus”. Rezultatem analizy porównawczej są różnice w wymianie ciepła określonej z zastosowaniem obu metod obliczeniowych.
Źródło:
Civil and Environmental Engineering Reports; 2012, 8; 77-87
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiz i modelirovanie teploobmennykh ustrojjstv v kontaktnykh apparatakh
Analysis and simulation of heat exchange devices in the contact devices
Autorzy:
Spinov, V.
Powiązania:
https://bibliotekanauki.pl/articles/77965.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
heat exchange
contact
mass transfer
heat transfer
contact device
energy efficiency
mathematical model
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2014, 16, 5
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical Analysis of the Impact of the Cooling Cycle Length in Vegetable Cold Stores on the Heat Exchange with Soil
Autorzy:
Sokołowski, Paweł
Nawalany, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/124309.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
vegetable cold store
heat exchange
technological interruption
soil temperature
Opis:
The paper includes an analysis of the impact of the cooling cycle length in vegetable cold stores on the heat exchange with soil. The scope involves the analysis of indoor and outdoor air temperature as well as soil temperature under the cold store and in its vicinity, specification and adaptation of the cold store-soil heat exchange model, model validation by comparison of the calculation results with experimental studies, choice of calculation variants, calculations for the used variants in non-stationary conditions, and a comparative analysis of the cold store-soil heat exchange for the used variants and of the soil temperature at selected solutions. The paper used the results of the field tests conducted in a vegetable cold store located in southern Poland. The building was used to store carrots from 1 October to 30 June. Four calculation variants were used for the in-depth study of the impact of selected factors on the heat exchange between the cold store and the soil. The calculations were performed based on the elementary balances method, using WUFI®plus software. The calculation model validation was based on the field measurements of indoor and outdoor air temperature as well as soil temperature in 5 measurement lines at the depth of 0.05, 0.50, 1.00 and 1.50 m. The obtained validation results showed a very good correlation between the measured and calculated data, in addition to an absence of significant differences. The calculation results for the 4 calculation variants showed significant differences in the heat exchange with soil.
Źródło:
Journal of Ecological Engineering; 2019, 20, 9; 162-170
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Feasibility of using heat-recovery exchangers in livestock buildings at a site at a specific altitude with a specific average outdoor air temperature
Autorzy:
Sleger, V.
Neuberger, P.
Polak, M.
Powiązania:
https://bibliotekanauki.pl/articles/62353.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Stowarzyszenie Infrastruktura i Ekologia Terenów Wiejskich PAN
Tematy:
feasibility
heat-recovery exchanger
livestock building
outdoor air temperature
climate condition
Czech Republic
agriculture
air temperature
weather station
ventilation
air exchange
heat exchanger
Opis:
The installation of an energy-saving facility must be preceded by analysis of its financial effectiveness. Among methods enabling such evaluation is the basic net profit calculation method. For this, the annual consumption of electricity for ventilation or of thermal energy for heating must be determined. The calculation formula uses the sum of energies for temperatures within the range from the calculation temperature for the area in question to the long-term average of the maximum temperature at the site, or to the temperature at which the heating power is zero. It is necessary to know the summary time of occurrence of a given temperature during a year. The site data can only be assessed based on long-term meteorological information. In fact, data used by current national standards to describe climatic conditions in the Czech Republic are from the years 1901 to 1950. The dependence of the average yearly temperature on altitude is shown in Fig. 1 for the 1961 1990 and 1991 2000 periods. It is evident that the average temperatures for the latter period are nearly 0.6 K higher than those for the former period, irrespective of the altitude. In this paper the climatic conditions are assessed based on daily data measured throughout the period from 1 January 1991 to 31 December 2000. Weather stations were selected so as to achieve a uniform coverage and continuity of measurement at each site (as far as possible). All the stations lie in the Czech Republic between 48.8° and 50.8° north latitude at altitudes from 158 m to 1324 m. It was the objective of this examination, based on the meteorological data collected to calculate the average number of days and hours during which the temperature during the year is lower than a specific limiting level, in dependence on the average yearly temperature of the site. Fig. 3 shows the average number of days in a year during which a temperature lower than a selected limiting level occurs, as calculated for the 1991 2000 period. The results are presented for 4 areas with average yearly temperatures of 6 °C 7 °C, 7 °C 8 °C, 8 °C 9 °C, and 9 °C 10 °C, respectively. The graphs enables us to ascertain the number of days during which a heating facility is in operation if the facility is activated by outdoor air temperature decrease to below a specific limiting level. If a typical daily temperature wave is considered, the method makes it possible to estimate the number of hours during which the air temperature is lower than the limiting level chosen. The difference between the data for various limiting levels allows us, for an area with a specific average yearly temperature to ascertain the time of occurrence of outdoor temperature within various ranges. The results of calculations are shown in Fig. 4 and Table 1. The method applied enables underlying data to be prepared for the assessment of energy demands for air heating at a given site and for estimation of the energy savings that could be achieved by installing economical air heating facilities in livestock buildings.
Źródło:
Infrastruktura i Ekologia Terenów Wiejskich; 2009, 07
1732-5587
Pojawia się w:
Infrastruktura i Ekologia Terenów Wiejskich
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Models of dynamic contact of a 2D thermoelastic bar
Autorzy:
Shillor, Meir
Powiązania:
https://bibliotekanauki.pl/articles/1839665.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
2D bar
dynamic contact
Barber’s heat exchange condition
debonding
humidity diffusion
Opis:
This work is based on a part of the plenary lecture I gave in the PCM-CMM-2019 conference in Krakow, Poland. It presents a new mathematical model for a thermoelastic 2D bar and proposes three problems for the processes of: (i) dynamic contact of the bar with an obstacle below it; (ii) vibrations of the right end between two stops; and (iii) debonding of two bars because of vibrations, humidity and thermal effects. The models are new and questions of existence of weak solutions, analysis of the solutions, effective numerical methods and simulations, as well as possible control, are unresolved yet.
Źródło:
Journal of Theoretical and Applied Mechanics; 2020, 58, 2; 295-305
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Recent sea surface temperature trends and future scenarios for the Mediterranean Sea
Autorzy:
Shaltout, M.
Omstedt, A.
Powiązania:
https://bibliotekanauki.pl/articles/49032.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
Mediterranean Sea
sea surface temperature
temporal distribution
spatial distribution
climate change
heat exchange
cloud cover
variation coefficient
Źródło:
Oceanologia; 2014, 56, 3
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies