Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "hazard index" wg kryterium: Temat


Tytuł:
Natural radioactivity in building materials in Iran
Autorzy:
Mehdizadeh, S.
Faghihi, R.
Sina, S.
Powiązania:
https://bibliotekanauki.pl/articles/147658.pdf
Data publikacji:
2011
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
gamma spectroscopy
absorbed dose rate
annual effective dose
hazard index
Opis:
This work presents a comprehensive study of natural radioactivity in building materials used in Iran. For this purpose, 177 samples of five types of building material, i.e. cement, gypsum, cement blocks, gravel and brick, were gathered from different regions of the country and analyzed by gamma spectroscopy to quantify radioactivity concentrations using a high purity germanium (HPGe) detector and a spectroscopy system. According to the results of this investigation, cement samples had maximum values of the mean Ra-226 and Th-232 concentrations, 39.6 and 28.9 Bq/kg, respectively, while the lowest value for mean concentration of these two radionuclides were found in gypsum samples 8.1 and 2.2 Bq/kg, respectively. The highest (851.4 Bq/kg) and lowest (116.2 Bq/kg) value of K-40 mean concentration were found in brick and gypsum samples, respectively. The absorbed dose rate and the annual effective dose were also calculated from the radioactivity content of the radionuclides. The results show that the maximum values of dose rate and annual effective dose equivalent were 53.72 nGy/h and 0.37 mSv/y in brick samples. The radium equivalent activities Req calculated were below the permissible level of 370 Bq/kg for all building materials. The values of hazard indexes were below the recommended levels, therefore, it is concluded that the buildings constructed from such materials are safe for the inhabitants. The results of this study are consistent with the results of other investigations in different parts of the world.
Źródło:
Nukleonika; 2011, 56, 4; 363-368
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Bioindication of megalopolis park ecosystems under aerotechnogenic loading
Autorzy:
Miroshnyk, N.
Grabovska, T.
Mazura, M.
Teslenko, I.
Powiązania:
https://bibliotekanauki.pl/articles/2106656.pdf
Data publikacji:
2022
Wydawca:
Instytut Badawczy Leśnictwa
Tematy:
air pollution
green infrastructure
hazard index
pollen indication
traffic
Ukraine
Opis:
This study focuses on the influence of motor transport on various indicators of park ecosystems and Taraxacum officinale Web., as well as on their applicability to the bioindication of the urban environments in the largest megalopolis of Ukraine, namely, Kyiv. Our investigations were carried out in 14 park ecosystems exposed to different levels of aerotechnogenic loading: low pollution level in Pushcha-Vodytsya (park) and outskirts, average pollution level alongseven roads with medium traffic and high pollution level along eight highways. Pollen indication, integration and statistical methods were used to identify the most sensitive indicators of the impact of air pollutants. The aim is to assess the impact of vehicle emissions on the state of park ecosystems in the metropolis using bioindication and GIS technologies. The effects of air pollution on green infrastructure at the level of cells, organisms, groups and ecosystems in time and space are revealed. Under the influence of aerotechnogenic pollution, there is a deterioration of trees, their drying, defoliation of crowns and deterioration of integral indicators of park ecosystems. Using QGIS (Free open source geographic information system, version 3.12.3 „București”, May 15, 2020), we have created maps for the spread of air pollutants. The highest levels of air pollution and damage to parks were concentrated in the central part of the city with dense buildings and near heavy traffic roads. The average daily maximum allowable concentration (MAC) of phytotoxicants exceeded 1.5 MACa.d. and depended on the terrain and directions of the prevailing winds. We registered degradation of the megalopolis ecological state by 19.3% for 7 years.
Źródło:
Folia Forestalia Polonica. Series A . Forestry; 2022, 64, 1; 15-37
0071-6677
Pojawia się w:
Folia Forestalia Polonica. Series A . Forestry
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena narażenia środowiskowego na Cr, Cu, Pb, Ni oraz Zn obecne w pyłach miejskich
Evaluation of environmental exposure to Cr, Cu, Pb, Ni and Zn present in urban dusts
Autorzy:
Trojanowska, M.
Świetlik, R.
Powiązania:
https://bibliotekanauki.pl/articles/372656.pdf
Data publikacji:
2017
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
ryzyko zdrowotne
metale ciężkie
indeks zagrożenia
health risk
heavy metals
hazard index
Opis:
W pracy dokonano oceny narażenia środowiskowego mieszkańców miast na metale ciężkie, obecne w pyłach miejskich. Badania skoncentrowano na całożyciowym narażeniu osoby dorosłej oraz dziecka na Cr, Pb, Ni, Cu i Zn. W ocenie ryzyka zdrowotnego uwzględniono narażenie drogą pokarmową, inhalacyjną i dermalną. Szacowanie zagrożeń przeprowadzono w oparciu o metodę zalecaną przez Amerykańską Agencję Ochrony Środowiska (US EPA). Wyznaczone wartości indeksów zagrożenia, charakteryzujących ryzyko zdrowotne wykazały, że największe zagrożenie występuje na skutek przypadkowego wprowadzania substancji toksycznych drogą pokarmową. W mniejszym stopniu o zagrożeniu decyduje wnikanie metali przez skórę człowieka, natomiast w najmniejszym wnikanie drogą inhalacyjną. Zgodnie z przyjętym scenariuszem narażenia mieszkańca bardziej zagrożoną populacją są dzieci, dla których uzyskano większe wartości indeksów zagrożenia.
The paper assesses the environmental exposure of urban dwellers to heavy metals present in urban dusts. The research was focused on lifelong exposure of an adult and a child to chromium, lead, nickel, copper and zinc. The assessment of health hazard included exposure by digestion, inhalation and skin contact. The hazard estimation was carried out using a method recommended by the American Environmental Protection Agency (US EPA). The determined hazard index values characterizing a health risk have shown that the highest hazard results from accidental unintentional intake of toxic substances. Skin penetration by metals is much less hazardous, whereas inhalation is least hazardous. According to the accepted scenario of human exposure, children are most at risk compared to other populations considered. The hazard index values obtained for them were the highest.
Źródło:
Zeszyty Naukowe. Inżynieria Środowiska / Uniwersytet Zielonogórski; 2017, 167 (47); 88-100
1895-7323
Pojawia się w:
Zeszyty Naukowe. Inżynieria Środowiska / Uniwersytet Zielonogórski
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena ryzyka zdrowotnego ogrodów działkowych Wrocławia
Health risk assessment for allotment gardens in Wrocław
Autorzy:
Kubicz, J.
Powiązania:
https://bibliotekanauki.pl/articles/96547.pdf
Data publikacji:
2014
Wydawca:
Fundacja Ekonomistów Środowiska i Zasobów Naturalnych
Tematy:
ryzyko zdrowotne człowieka
metale ciężkie
wskaźnik ryzyka
ogrody działkowe
human health risk
heavy metals
hazard index
allotment gardens
Opis:
Ogrody pracownicze lub rodzinne, zwane potocznie działkami lub ogrodami działkowymi, są bardzo popularnym miejscem wypoczynku i rekreacji mieszkańców miast. Niejednokrotnie wykorzystywane są także w amatorskiej uprawie warzyw i owoców. Z uwagi na spełniane funkcje powinny być zlokalizowane na obszarach wolnych od zanieczyszczeń powietrza, gleb oraz wód gruntowych. Niestety, w większości polskich aglomeracji ogrody działkowe są rozmieszczone w okolicach zakładów przemysłowych, tras komunikacyjnych oraz na terenach poddanych rekultywacji, gdzie często obserwuje się zanieczyszczenie metalami ciężkimi i innymi substancjami.
The paper assesses the human health risk for users of allotment gardens in Wrocław. The assessment is made on the basis of heavy metals (Cd, Cu, Zn) hazard. It takes the two main routes of exposure into account: accidental ingestion of contaminated soil and dermal contact with contaminated soil. Attention was focused on recreational scenario of hazard. The methods used have been recommended by the US Environmental Protection Agency. Results of the analysis show the highest value of the hazard index can be observed for children, in the allotment gardens located in Wroclaw – Grabiszyn, in the area of environmental impact of Hutmen factory.
Źródło:
Ekonomia i Środowisko; 2014, 1; 154-163
0867-8898
Pojawia się w:
Ekonomia i Środowisko
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technology for increasing the level of environmental safety of iron ore mines with use of emulsion explosives
Autorzy:
Khomenko, Oleh
Kononenko, Maksym
Myronova, Inna
Kovalenko, Ihor
Cabana, Edgar Caceres
Dychkovskyi, Roman
Powiązania:
https://bibliotekanauki.pl/articles/27324386.pdf
Data publikacji:
2023
Wydawca:
Instytut Techniki Górniczej KOMAG
Tematy:
source of emission
concentration
environmentally hazardous substances
physicochemical analysis
emulsion explosives
environmental hazard index
emisja
koncentracja
zagrożenia środowiskowe
Opis:
Laboratory and industrial studies have established the total impact of environmentally hazardous substances, taking into account the distance from the source of emissions and the specific consumption of explosives. With the help of physicochemical analysis and biological testing, the dependence of the change in the conditional indicator of damage to bioindicators with an increase in the distance from the source of emission and the specific annual consumption of explosives was revealed. A methodology for calculating the environmental assessment of the state of atmospheric air around the mine ventilation shaft has been developed. The exponential dependence of the influence of surface concentrations of environmentally hazardous substances on the damage of bioindicators at the cellular and organismic levels has been established, which makes it possible to assess the state of atmospheric air at industrial sites of iron ore mines. The proposed technology of sand drilling, which involves the use of emulsion explosives in mining ore deposits in chamber development systems will reduce emissions of environmentally hazardous substances into the atmosphere and increase the level of environmental safety of iron ore mines.
Źródło:
Mining Machines; 2023, 41, 1; 48--57
2719-3306
Pojawia się w:
Mining Machines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Human Health Risk Assessment of Heavy Metals Bound on Particulate Matter
Ocena ryzyka dla zdrowia ludzkiego w odniesieniu do metali ciężkich związanych z materią cząstek stałych
Autorzy:
Zmijkova, D.
Koliba, M.
Raclavsky, K.
Powiązania:
https://bibliotekanauki.pl/articles/318520.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
zanieczyszczenie powietrza
pył zawieszony PM10
metale ciężkie
wielkość zagrożenia
indeks zagrożeń
air pollution
particulate matter PM10
heavy metals
hazard quotient
hazard index
cancer risk
pollution load index
Opis:
The samples of particulate matter (PM10) were collected at five sampling sites of various character situated in the Moravian-Silesian Region (Czech Republic). Concentrations of heavy metals bound to particulate matter were determined by the method of ICP – optical emission spectroscopy. The contamination of heavy metals was expressed as the pollution load index – PLI. Human health risk assessment was performed by U.S. EPA method – using the hazard quotient – HQ, hazard index – HI, and excess lifetime cancer risk – ELCR. The pollution and resulting carcinogenic risks increase during the winter season. The potential non-carcinogenic risks are not significant.
Próbki pyłu zawieszonego (PM10) zebrano w pięciu miejscach o różnym charakterze w regionie Morawskośląskim (Republika Czeska). Stężenie metali ciężkich związanych z cząstkami stałymi oznaczano metodą ICP - optycznej spektroskopii emisyjnej. Zanieczyszczenie metalami ciężkimi zostało wyrażone jako wskaźnik obciążenia zanieczyszczeniem - PLI. Ocenę ryzyka dla zdrowia ludzkiego przeprowadzono metodą US EPA - z wykorzystaniem ilorazu zagrożenia - HQ, wskaźnika zagrożenia - HI i zwiększenia ryzyka wystąpienia raka w całym okresie życia - ELCR. Zanieczyszczenie i związane z tym ryzyko rako-twórczości zwiększa się w sezonie zimowym. Potencjalne zagrożenie nierakotwórcze nie jest znaczące.
Źródło:
Inżynieria Mineralna; 2018, R. 19, nr 1, 1; 93-98
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of Environmental Issues of Mining Enterprises Basing on Integral Environmental Hazard Index
Analiza wpływu na środowisko przedsiębiorstwa górniczego w oparciu o Zintegrowany Indeks Niebezpieczeństwa
Autorzy:
Khokhryakov, A. V.
Fadeichev, A.
Tseytlin, E.
Powiązania:
https://bibliotekanauki.pl/articles/317856.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
environmental hazard
environmental safety
integral environmental hazard index of mining
mining
environmental safety assessment
zagrożenia środowiskowe
bezpieczeństwo środowiska
Zintegrowany Indeks Środowiskowy dla Górnictwa
ocena bezpieczeństwa środowiskowego
Opis:
In comparison with other industrial complexes, mining enterprises generate the most multifold negative impact on all environmental components: atmosphere, hydrosphere, lithosphere. In the current context of resource limitation, the objective assessment of the level of environmental safety of different technology concepts and organizational decisions, mining enterprises is a vital need. Today, there are three different approaches to environmental safety assessment of industrial enterprises. The main disadvantages of these approaches are complication in specific environmental consideration of mining enterprises; difficulty of top environmental target selection, subjectivity of enterprises ranking by level of environmental safety. It was proposed a new approach of environmental safety and negative impact assessment (with help of integral environmental hazard index of mining) in the light of specific features of mining. It is based on complex affine environmental, technology and geological factors. This approach is admitting to rank mining enterprises in negative impact descending order, define top environmental targets for mining enterprises and the most effective every environmental action.
W porównaniu z innymi gałęziami przemysłu, przedsiębiorstwa górnicze generują najbardziej negatywny wpływ na wszystkie komponenty środowiska: atmosferę, hydrosferę, litosferę. W obecnej sytuacji ubożenia zasobów, istnieje potrzeba oceny poziomu bezpieczeństwa środowiskowego dla różnych technologii. Obecnie istnieją trzy sposoby oceny bezpieczeństwa środowiskowego przedsiębiorstw przemysłowych. Główne wady tych rozwiązań to skomplikowane rozwiązania technologiczne przedsiębiorstw górniczych, trudności w wyborze rozwiązania docelowego, subiektywność rankingu rozwiązań. Zaproponowano nowe podejście do oceny bezpieczeństwa środowiskowego i oceny skutków dla środowiska za pomocą integralnego wskaźnika zagrożenia środowiska w górnictwie. Jest on oparty na złożonych czynnikach środowiskowych, technologicznych i geologicznych. Takie podejście pozwala ocenę przedsiębiorstw górniczych pod katem malejącego negatywnego wpływu na środowisko i wskazanie najbardziej skutecznych działanie.
Źródło:
Inżynieria Mineralna; 2014, R. 15, nr 1, 1; 283-285
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie metod DSC i DTA do szacowania parametrów bezpieczeństwa materiałów wysokoenergetycznych na przykładzie soli amonowej dinitroaminy
Application of DSC and DTA Methods for Estimation of Safety Parameters of High Energetic Materials Such as Dinitroamine Ammonium Salt
Autorzy:
Gołofit, T.
Książczak, A.
Powiązania:
https://bibliotekanauki.pl/articles/403508.pdf
Data publikacji:
2011
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
bezpieczeństwo
sól amonowa dinitroaminy
parametry zagrożenia i ryzyka
safety
ammonium dinitramide
hazard and risk index
Opis:
Metody DSC i DTA pozwalają przy zastosowaniu równań empirycznych wykorzystujących dane kinetyczne na zaklasyfikowanie substancji do potencjalnie niebezpiecznych lub bezpiecznych. Wykorzystanie reguły 100 oraz temperatury ADT24 pozwala określić maksymalną bezpieczną temperaturę prowadzenia procesów technologicznych. Materiały wysokoenergetyczne z punktu widzenia bezpieczeństwa można zaklasyfikować przy użyciu: potencjału Koenena, indeksu termicznego ryzyka, indeksu zagrozenia reakcją, indeksu chwilowej gęstości mocy oraz parametru zagrożenia wybuchem. Wykonano analizy DSC i DTA soli amonowej dinitroaminy (ADN), wyznaczono parametry kinetyczne i na ich podstawie oszacowano bezpieczeństwo użytkowania i warunki bezpieczne prowadzenia procesów technologicznych. Maksymalna, bezpieczna temperatura prowadzenia procesów technologicznych z wykorzystaniem ADN-u jest niższa od 351 K. Sól amonowa dinitroaminy została zaklasyfikowana do grupy związków niestabilnych, potencjalnie niebezpiecznych, zdolnych do wybuchu, do grupy związków wysokiego ryzyka. Uzyskane wysokie parametry indeksów niebezpieczeństwa wskazują na to, że ADN wymaga szczególnej ostrożności w procesach technologicznych oraz przy wykorzystywaniu w formach użytkowych.
DSC and DTA methods, combined with empirical equations based on kinetic data, allow one to classify a substance as potentially harmful or safe. Utilizing the "100 degree rule" and ADT24 temperature enables one to determine the highest safe temperature at which a technological process can be carried out. High energetic materials can be classified from the safety standpoint by using: Koenen potential, Thermal risk index, Reaction hazard index, Instantaneous Power Density and Explosion Potential. DSC and DTA analysis of dinitroamine salt (ADN) were performed. On the basis of the results usage safety and safe conditions of technological process were estimated. The highest safe temperature of the technological process with using ADN is 351 K. ADN was classified to the group of the unstable compounds, potentially dangerous, able to explode and to the group of the high risk substances. The obtained high values of safety parameters indicate that ADN requires great caution when it is used in operational moulds and in technological processes.
Źródło:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa; 2011, 2, 3 (5); 31-42
2081-5891
Pojawia się w:
Problemy Mechatroniki : uzbrojenie, lotnictwo, inżynieria bezpieczeństwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Safe working conditions in hot mine environment – the analysis of different indices
Bezpieczne warunki pracy w gorącym środowisku kopalni – analiza różnych wskaźników
Autorzy:
Drenda, J.
Pach, G.
Różański, Z.
Wrona, P.
Sułkowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/218716.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
górnictwo podziemne
zagrożenie cieplne
wskaźniki mikroklimatu
underground mining
thermal hazard
microclimate index
Opis:
The article presents the discussion and practical examples relating to the interpretation of the notion of safe working areas in hot environment based on various indices (American Effective Temperature (ATE), climate equivalent temperature (tzk) and the Silesian temperature (TS)). The first, theoretical part includes an analysis of the allowable dry bulb temperatures in line with the threshold values for the specified indices in case of various relative humidity and airflow velocity values. Also, the variability of the studied allowable working areas was exhibited for hypothetical extreme cases (such as an airflow of 0 m/s or the relative humidity of φ = 0%) as well as for actual conditions registered in headings. The second part consisted in the analysis of the allowable full-time working conditions for two selected cases of driving roadways. The analysis was conducted for two indices applied in the first part and complemented with an appraisal considering the dry bulb temperature (ts) and the wet kata thermometer units (Kw). It has been exhibited that while regulating the airflow and the dry bulb temperature in the heading, significant differences in the interpretations (ranges) of safe working areas occur depending on the index that is being used. The conducted works indicate that by applying air cooling in the heading (decreasing the psychrometric temperatures considering the thermodynamic process corresponding to sensible air cooling) or by increasing the airflow, the requirements of the microclimate indices are fulfilled in the following order: ATE, tzk, TS.
W artykule przedstawiono dyskusję oraz przykłady praktyczne dotyczące interpretacji obszarów pracy bezpiecznej w środowisku gorącym według różnych wskaźników (Amerykańska temperatura efektywna ATE, temperatura zastępcza klimatu tzk, temperatura śląska TS). W pierwszej, teoretycznej części dokonano analizy dopuszczalnych wartości temperatury suchej według wartości granicznych dla wymienionych wskaźników dla różnych przypadków wilgotności względnej i prędkości powietrza. Wykazano także zmienność badanych obszarów pracy dopuszczalnej dla hipotetycznych przypadków skrajnych (np. prędkość powietrza w = 0 m/s lub wilgotność względna φ = 0%) jak i rzeczywistych, odnotowanych w wyrobiskach górniczych. W drugiej części przeprowadzono analizę warunków pracy dopuszczalnej w pełnym wymiarze godzin dla dwóch wybranych przykładów, dotyczących drążonych wyrobisk korytarzowych. Analizę prowadzono dla wskaźników zastosowanych w części pierwszej i uzupełniono je o ocenę według temperatury suchej (ts) i katastopni wilgotnych (Kw). Przedstawiono, że przy regulacji zarówno prędkości powietrza jak i temperatury suchej w wyrobisku występują znaczne różnice w interpretacji (zakresie) obszarów pracy bezpiecznej w zależności od wykorzystanego wskaźnika. Z przeprowadzonych prac wynika, że stosując w wyrobisku schładzanie powietrza (zmniejszanie temperatur psychrometrycznych według przemiany termodynamicznej odpowiadającej chłodzeniu jawnemu powietrza) lub zwiększanie prędkości powietrza wymagania stawiane przez wskaźniki mikroklimatu spełniane są w następującej kolejności ATE, tzk, TS.
Źródło:
Archives of Mining Sciences; 2018, 63, 1; 111-124
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ujemne i zawyżone wartości wskaźnika Grahama
Negative and overestimated values of Graham’s index
Autorzy:
Słowik, S.
Świerczek, L.
Powiązania:
https://bibliotekanauki.pl/articles/164676.pdf
Data publikacji:
2014
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
górnictwo
zagrożenie pożarowe
profilaktyka
wskaźnik Grahama
wskaźnik ubytku tlenu
mining
fire hazard
prevention
Graham’s index
oxygen loss index
Opis:
W artykule przedstawiono analizę występowania w praktyce kopalnianej ujemnych wartości wskaźnika Grahama oraz anormalnie dużych w odniesieniu do rzeczywistego poziomu zagrożenia pożarowego. Wykorzystano do tego próbę składającą się z 1962 analiz chemicznych próbek powietrza pobranych ze zrobów ścian zawałowych oraz zza tam izolacyjnych. Stwierdzono, że główną przyczyną tych wartości jest sposób wyznaczania wskaźnika Grahama. Przeprowadzono analizę wskaźnika i wykazano, że przy wartości mianownika do 0,1 wskaźnik Grahama nie sprawdza się (zawyża zagrożenie pożarowe). Odniesiono się do kryterium wskaźnika ubytku tlenu mówiącego o 1 % progu (–ΔO2 < 1 %) poniżej którego wskaźnik Grahama wykazuje duże wahania nie pozwalające na prawidłową interpretację [6]. Ustalono, że to kryterium w obecnie stosowanych sposobach przewietrzania nie znajduje zastosowania. Przeanalizowano zmodyfikowaną wersję wskaźnika Grahama przyjmując, że do jego wyznaczania wykorzystany zostanie stosunek różnicy CO do różnicy tlenu. Wykazano, że nie wyeliminuje to występowania nietypowych przypadków. Dodatkowo pojawia się wtedy pytanie, czy kryteria stosowane dla wskaźnika Grahama można bezpośrednio przenieść na zmodyfikowany wskaźnik.
This paper presents the analysis of Graham’s index negative values as well as the overestimated values present in mining practice, in relation to the real level of fire hazard. The research was done by a test consisting of 1962 chemical analyses of air samples obtained from the gobs in longwall with caving and from behind the stoppings. It was stated that the presence of such values of the Graham’s index is caused by the way it is determined. Consequently, the analysis of the index showed by the denominator up to 0,1, the index fails (it overestimates the fire hazard). The authors refer to the criterion of oxygen loss index which defines a 1% threshold (–ΔO2 < 1%) below which the Graham’s index demonstrates high fluctuations precluding from proper interpretation [6]. It was determined that this criterion in the currently applied methods of ventilation does not suit the requirements. Assuming that for the determination of it, the ratio of CO difference to oxygen difference will be used, the Graham’s index was analyzed but in a modified version. It was shown that it will not eliminate the occurrence of atypical cases. Moreover, a question occurs whether the criteria determined for the Graham’s index can be directly transcribed on the modified index.
Źródło:
Przegląd Górniczy; 2014, 70, 12; 98-105
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Two stage assessment of thermal hazard in an underground mine
Dwustopniowa ocena zagrożenia cieplnego w podziemnej kopalni
Autorzy:
Drenda, J.
Sułkowski, J.
Pach, G.
Różański, Z.
Wrona, P.
Powiązania:
https://bibliotekanauki.pl/articles/220180.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
wskaźnik klimatu
wskaźnik cieplny
zagrożenie cieplne
bezpieczeństwo klimatyczne człowieka
climate index
thermal index
thermal hazard
climatic safety of a human
Opis:
The results of research into the application of selected thermal indices of men’s work and climate indices in a two stage assessment of climatic work conditions in underground mines have been presented in this article. The difference between these two kinds of indices was pointed out during the project entitled “The recruiting requirements for miners working in hot underground mine environments”. The project was coordinated by The Institute of Mining Technologies at Silesian University of Technology. It was a part of a Polish strategic project: “Improvement of safety in mines” being financed by the National Centre of Research and Development. Climate indices are based only on physical parameters of air and their measurements. Thermal indices include additional factors which are strictly connected with work, e.g. thermal resistance of clothing, kind of work etc. Special emphasis has been put on the following indices - substitute Silesian temperature (TS) which is considered as the climatic index, and the thermal discomfort index (δ) which belongs to the thermal indices group. The possibility of the two stage application of these indices has been taken into consideration (preliminary and detailed estimation). Based on the examples it was proved that by the application of thermal hazard (detailed estimation) it is possible to avoid the use of additional technical solutions which would be necessary to reduce thermal hazard in particular work places according to the climate index. The threshold limit value for TS has been set, based on these results. It was shown that below TS = 24°C it is not necessary to perform detailed estimation.
W artykule przedstawiono wyniki badań nad stosowaniem wybranych wskaźników cieplnych pracy człowieka i wskaźników klimatu w dwustopniowej ocenie klimatycznych warunków pracy w kopalniach podziemnych. Różnicę pomiędzy tymi wskaźnikami wykazano podczas realizacji zadania kierowanego przez Instytut Eksploatacji Złóż Politechniki Śląskiej pt. „Opracowanie zasad zatrudniania pracowników w warunkach zagrożenia klimatycznego w podziemnych zakładach górniczych”. Zadanie było częścią projektu strategicznego „Poprawa bezpieczeństwa pracy w kopalniach” finansowanego przez Narodowe Centrum Badań i Rozwoju. Wskaźniki klimatu oparte są jedynie na pomiarach parametrów fizycznych powietrza, natomiast wskaźniki cieplne dodatkowo uwzględniają inne czynniki związane z wykonywaną pracą, np. rodzaj odzieży oraz ciężkość wykonywanej pracy. Podczas realizacji projektu pod szczególną uwagę wzięto dwa wskaźniki, temperaturę śląską (TS), która należy do grupy wskaźników klimatycznych oraz wskaźnik dyskomfortu cieplnego (δ), należącego do wskaźników cieplnych pracy człowieka. Pod dyskusję poddano możliwość dwustopniowego stosowania tych wskaźników (ocena podstawowa i szczegółowa), a także wykazano na przykładach, że za pomocą stosowania wskaźnika cieplnego (jako oceny szczegółowej) można uniknąć wprowadzania dodatkowych środków technicznych i organizacyjnych by zmniejszyć zagrożenie cieplne w danym miejscu pracy. Na podstawie wyników badań ustalono także graniczną wartość wskaźnika TS = 24°C poniżej, której nie ma konieczności stosowania szczegółowego stopnia oceny zagrożenia klimatycznego.
Źródło:
Archives of Mining Sciences; 2016, 61, 2; 309-322
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of a complex assessment of landslide hazards in mountain regions
Autorzy:
Boyko, K.E.
Powiązania:
https://bibliotekanauki.pl/articles/886584.pdf
Data publikacji:
2017
Wydawca:
Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:
geology
landslide hazard
mountain region
geological structure
GIS analysis
factor analysis
stability index
SINMAP model
Stability Index MAPping zob.SINMAP model
Opis:
Application of a complex assessment of landslide hazards in mountain regions. The main regional factors of occurrence and activation of landslides within the mountain region were examined. As a result of study of recommendations made by experts, geologists, and gap analysis of existing methods of forecasting the landslide process, an algorithm of comprehensive assessment of landslide hazard areas based on the construction of models in a GIS environment was proposed. These models describe the spatial patterns of landslides. All factors determining the tendency of the studies area to the landslide process development were divided into actual factors, reflecting the regional peculiarities of the territory and forming the landslide-prone slopes (static model), as well as triggering factors, initiating the landslide process and determining its activity (dynamic model). The first cartographic model was built, showing the distribution of the deterministic indirect indicator of landslide hazard, i.e. stability index.
Źródło:
Scientific Review Engineering and Environmental Sciences; 2017, 26, 3[77]
1732-9353
Pojawia się w:
Scientific Review Engineering and Environmental Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
On the nonparametric estimation of the conditional hazard estimator in a single functional index
Autorzy:
Gagui, Abdelmalek
Chouaf, Abdelhak
Powiązania:
https://bibliotekanauki.pl/articles/2107053.pdf
Data publikacji:
2022-06-14
Wydawca:
Główny Urząd Statystyczny
Tematy:
single functional index
conditional hazard function
nonparametric estimation
α-mixing dependency
asymptotic normality
functional data
Opis:
This paper deals with the conditional hazard estimator of a real response where the variable is given a functional random variable (i.e it takes values in an infinite-dimensional space). Specifically, we focus on the functional index model. This approach offers a good compromise between nonparametric and parametric models. The principle aim is to prove the asymptotic normality of the proposed estimator under general conditions and in cases where the variables satisfy the strong mixing dependency. This was achieved by means of the kernel estimator method, based on a single-index structure. Finally, a simulation of our methodology shows that it is efficient for large sample sizes.
Źródło:
Statistics in Transition new series; 2022, 23, 2; 89-105
1234-7655
Pojawia się w:
Statistics in Transition new series
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przedział wiarygodności wskaźnika Grahama
Validity range of Graham index
Autorzy:
Słowik, S.
Świerczek, L.
Powiązania:
https://bibliotekanauki.pl/articles/166953.pdf
Data publikacji:
2015
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
górnictwo
zagrożenie pożarowe
profilaktyka
wskaźnik Grahama
przedział wiarygodności
mining
fire hazard
prevention
Graham index
validity range
Opis:
W artykule omówiono właściwości wskaźnika Grahama związane z jego konstrukcją matematyczną, z której wynika, że może on podążać asymptotycznie w kierunku zera i nieskończoności. Następnie w oparciu o próbę złożoną z 2777 analiz chemicznych powietrza pobranego ze zrobów ścianowych i zza tam izolacyjnych wykazano, że dla skrajnych wartości mianownika wskaźnika Grahama obserwujemy rozbieżność pomiędzy rzeczywistym stopniem zagrożenia pożarowego a prognozowanym przez wskaźnik. Zaobserwowano, że w przypadku bardzo niskich wartości mianownika występuje tendencja do zawyżania poziomu zagrożenia przez wskaźnik, natomiast dla bardzo wysokich wartości mianownika obserwuje się tendencję odwrotną. Dlatego przeprowadzono analizę mającą na celu wyznaczenie przedziału wiarygodności wskaźnika Grahama w zależności od wartości jego mianownika. W tym celu wykorzystano odpowiednie narzędzia matematyczne dające dużą pewność co do weryfikowanych hipotez i wyznaczono przedział mianownika, dla którego można przyjąć, że wskaźnik Grahama na poziomie prawdopodobieństwa co najmniej 95% określa prawidłowo stopień zagrożenia pożarowego. Dla przypadków wykraczających poza wyznaczony przedział nie można już mieć takiej pewności. Uzyskane wnioski mogą być bardzo pomocne przy analizie i ocenie zagrożenia pożarowego w kopalniach.
This paper describes the characteristics of Graham index and its mathematical structure which shows that it can asymptotically approach zero and infinity. Based on a sample of 2777 chemical analyzes of air, taken from longwall workings as well as from behind the isolating dams, it has been shown that for the extreme values of Graham index there is a discrepancy between the actual level of fire risk and the one predicted by the indicator. It was observed that at the very low values of the denominator the Graham index overestimates the level of risk and for very high values of the denominator there is an opposite tendency. Therefore, an analysis was conducted to determine the validity range of Graham index, depending on the values of its denominator. For this purpose an appropriate mathematical tools were used that provide high reliability of the verified hypotheses. In the analysis the denominator range was calculated, for which it can be assumed at 95% probability that the rate of Graham index correctly determines the degree of fire hazard. For cases outside of the estimated range there is no certainty. The obtained results can be very helpful in the analysis and assessment of fire hazard risk in coal mines.
Źródło:
Przegląd Górniczy; 2015, 71, 12; 49-61
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Risk Assessment Approaches for Offshore Structures
Autorzy:
Shouman, M.
Ghoneim, N. I.
El-Khatib, M.
Powiązania:
https://bibliotekanauki.pl/articles/1841492.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Morski w Gdyni. Wydział Nawigacyjny
Tematy:
offshore structures
risk assessment
QRA
hazard identification
offshore platform
risk matrix
risk index
formal safety assessment
Opis:
Risk assessment and management was established as a scientific field some 30–40 years ago. Principles and methods were developed for how to conceptualize, assess, and manage risk. These principles and methods still represent largely the foundation of this field today, but many advances have been made, linked to both the theoretical platform and practical models and procedures. The purpose of the thesis is to perform a review of these advances, with a special focus on the fundamental ideas and thinking on which these are based. We have looked for trends in perspectives and approaches, and we reflect on where further development of the risk field is needed and should be encouraged. The present study is written for readers with different types of background, not only for experts on risk. However, there is a conflict between the cost impact and safety aspect. E&P managers as well as government supervisor authorities are constantly faced with decisions to be made regarding of safety. In order to ensure comparability and to set priorities application of QRA is a useful tool to justify choices made with regard to personnel safety, environmental protection, asset damage and business reputation, it is recommended to apply the systematic cause analysis method and develop the risk management models which contains an integral approach toward the health, safety and environmental aspect.
Źródło:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation; 2021, 15, 2; 401-406
2083-6473
2083-6481
Pojawia się w:
TransNav : International Journal on Marine Navigation and Safety of Sea Transportation
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies