Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "hardware system" wg kryterium: Temat


Tytuł:
Horizontal automated storage and retrieval system
Autorzy:
Tutak, J.S.
Wiech, J.
Powiązania:
https://bibliotekanauki.pl/articles/102684.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
automated storage and retrieval
manipulator
hardware system
software system
Opis:
This article describes an innovative automated storage and retrieval system (AS/RS) based on Raspberry Pi. It substantiates the grounds of the undertaken subject and presents an overview of existing automated storage and retrieval solutions. Moreover, the machine is described in terms of type and structure of, following the analysis of the kinematics and dynamics, conducted as a part of the project. The article presents the mechanical design of the machine, describes the choice of structural elements and actuators, and develops the control system with an algorithm using Raspberry Pi. Furthermore, an interface based on a touch-screen display cooperating with a single board computer was designed. One of the key features of the device is its modularity and the individual configurability of the storage module, depending on available storage space where an automated storage and retrieval system is to be installed: vertically - by defining the number of containers in width and height, horizontally - by defining the number of containers in width and depth, horizontally and vertically - by defining the number of containers in width and depth, and modules responsible for storage in height. The final stage of the project consisted in verifying the designed solution in tests on a prototype storage device. More precisely, it was tested on a machine prepared for a particular customer and a chosen configuration, which is a combination of the triune manipulator of vertical storage controlled in an open loop.
Źródło:
Advances in Science and Technology. Research Journal; 2017, 11, 1; 82-95
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System diagnostyki aktywności ruchowej z zastosowaniem systemu Android
Diagnosis of physical activity system by using Android
Autorzy:
Tutak, J. S.
Wyłupek, A.
Powiązania:
https://bibliotekanauki.pl/articles/136076.pdf
Data publikacji:
2017
Wydawca:
Wyższa Szkoła Techniczno-Ekonomiczna w Szczecinie
Tematy:
diagnostyka
mechatronika
system Android
mechatronics
hardware system
software system
Android
EMG measurements
Opis:
Wstęp i cel: Celem projektu było zbudowanie systemu do diagnozy aktywności ruchowej osób z wykorzystaniem urządzenia wyposażonego w system Android. Przeprowadzona diagnoza nie jest jedynie oparta o wskazania z czujników na pokładzie telefonu. Wraz z nią współpracuje układ odpowiedzialny za pomiar aktywności mięśni. Materiał i metody: Aplikacja dla systemu Android napisana została w języku Java. System uruchamia ją za pomocą maszyny wirtualnej Dalvik. Aplikacja została przygotowana w środowisku Android- Studio przy pomocy powyższego języka. W artykule omówiono sposób działania systemu z uwzględnieniem pomiaru sygnałów EMG z zastosowaniem zewnętrznego urządzenia Neurobit Optima. Wyniki: Wynikiem pracy jest w pełni funkcjonalny prototyp. Przeprowadzono szczegółowe testy potwierdzające poprawność działania opracowanego systemu. Wniosek: Opisany system jest nowatorski z pozytywnymi opiniami przyszłych użytkowników.
Introduction and aim: The article presents the issues of the system to the diagnosis the physical activity of people using the Android-based device. The main goal of the project was to create a system responsible for the measurement of activity the muscles and physical movement parameters. Material and methods: The project has been designed and implemented based on software Android - Studio and Neurobit Optima for EMG measurements. Results: The result of work is fully functional prototype assist device. Conclusion: The method described is innovative with positive test and opinion of future users.
Źródło:
Problemy Nauk Stosowanych; 2017, 6; 163-172
2300-6110
Pojawia się w:
Problemy Nauk Stosowanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Systemy rozwiązań obiektów przemysłowych jako wzór rozwiązań dla budynków użyteczności publicznej. Część 1. Systemowość rozwiązań obiektów przemysłowych
Systems as solutions of industrial buildings
Autorzy:
Goncikowski, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/1848264.pdf
Data publikacji:
2021
Wydawca:
PWB MEDIA Zdziebłowski
Tematy:
architektura
obiekt przemysłowy
systemowość
hardware system
software system
architecture
industrial building
system
Opis:
Jedną z cech typologicznych architektury współczesnych obiektów przemysłowych jest wielopoziomowa systemowość rozwiązań. Pod tym względem budynki przemysłowe określane są jako zbiór lub system systemów. Systemy współczesnych obiektów przemysłowych można podzielić na hardware systems: systemy fizyczne oraz software systems: systemy logiczne. Wśród systemów fizycznych można wyróżnić: system przegród wewnętrznych, instalacji, obsługi procesów, konstrukcji, wnętrza, elewacji. Wśród systemów logicznych, czyli strategii logicznych złożenia i działania systemów fizycznych: elastyczność, adaptacyjność, modułowość oraz typizację, koordynację i integracyjność, systemy organizacji procesów oraz transportu. Pomiędzy systemami logicznymi współczesnych obiektów przemysłowych charakterystycznie wyróżniają się: adaptacyjność i elastyczność obiektów oraz integracyjność złożonych systemów fizycznych budynków. Silnie obecna jest typizacja i modularność rozwiązań oraz - w różnym stopniu – systemowa prefabrykacja. Budynki przemysłowe charakteryzuje obecność zaawansowanych systemów sterowania, automatyki, łączności sieciowej. Obecne i rozwijane w budynkach przemysłowych rozwiązania systemów fizycznych oraz logicznych – sprzyjające elastyczności i adaptacyjności obiektów, oraz rozwiązania w zakresie koordynacji – integracyjności systemów są wzorem dla obiektów użyteczności publicznej. W zakresie systemów fizycznych budynki użyteczności publicznej czerpią z obiektów przemysłowych rozwiązania systemów konstrukcyjnych, rozwiązania materiałowe, rozwiązania systemów energetycznych, a w przyszłości mogą stać się wzorem zautomatyzowanego budynku połączonego z globalną siecią i internetem rzeczy.
An important feature of the architecture of modern industrial facilities is the characteristic systematic nature. Industrial buildings are referred to as a set or system of systems. Systems of modern industrial facilities can be categorized as: harware systems and software systems. Among hardware systems are: internal partitions, service, utilities, structure, interior, envelope. Software systems are the way the harware systems are combined: flexibility, adaptability, modularity, coordination and integration, process organization systems, transport organization. Among the software systems of modern industrial facilities adaptability and flexibility of objects as well as integration and advanced coordination of complex physical systems of buildings stand out in a characteristic way. Typization and modularity of solutions as well as, to varying degrees, prefabrication are present in a strong way. Industrial buildings are characterized by the presence of control and automation systems. It can be hypothesized that solutions present and developed in industrial buildings favoring the flexibility and adaptability of objects as well as coordination solutions - systems integrity will be a model for other types of facilities, e.g. public use buildings.
Źródło:
Builder; 2021, 25, 7; 90-95
1896-0642
Pojawia się w:
Builder
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System wspomagający funkcjonowanie osób starszych i niepełnosprawnych
Mockup of supporting system for functioning of elderly and disabled people
Autorzy:
Tutak, J. S.
Woś, T.
Powiązania:
https://bibliotekanauki.pl/articles/135758.pdf
Data publikacji:
2016
Wydawca:
Wyższa Szkoła Techniczno-Ekonomiczna w Szczecinie
Tematy:
osoby starsze
niepełnosprawni
mechatronika
sterowanie gestem
oprogramowanie systemu
Arduino IDE
elderly people
disabled people
mechatronics
hardware system
software system
Opis:
Wstęp i cel: Celem realizowanego projektu jest opracowanie systemu wspomagającego funkcjonowanie osób starszych i niepełnosprawnych cierpiących z powodu dysfunkcji ruchowych. W artykule opisano pierwszy etap projektu, w którym system zapewnia możliwość wspomagania dwóch czynności: zaświecanie i gaszenie światła oraz zasłanianie i odsłanianie rolet okiennych. Do każdej z tych czynności zastosowano sterowanie gestem. Materiał i metody: W pracy wykorzystano platformę programistyczną Arduino LEONARDO, sensor ruchu Microsoft Kinect, komputer klasy PC oraz elementy wykonawcze systemu takie jak przekaźnik, serwomechanizm czy buzzer. W artykule omówiono sposób działania systemu oraz oprogramowanie na płytkę Arduino odpowiedzialną za sterowanie elementami wykonawczymi i odczyt informacji z czujników. Dodatkowo przedstawione zostały najważniejsze elementy oprogramowania umożliwiające komunikacje pomiędzy sensorem Kinect a płytką Arduino. Wyniki: Wynikiem pracy jest w pełni funkcjonalny prototyp/makieta systemu. Wniosek: Opisany system jest nowatorski z pozytywnymi opiniami przyszłych użytkowników.
Introduction and aim: The article presents the issues of supporting system for elderly and disabled people. The article describes the first phase of the project, in which the system provides the ability to support two steps. For each of these activities is used to control gesture. Material and methods: The project has been designed and implemented based on software platform Arduino Leonardo, motion sensor Microsoft Kinect, PC computer system and actuators such as relays, servo or buzzer. In addition, have been presented the main elements of hardware / software system enables communication between the sensor Kinect and Arduino plate. Results: The result of work is fully functional prototype assist device. Conclusion: The method described is innovative with positive test and opinion of future users.
Źródło:
Problemy Nauk Stosowanych; 2016, 4; 157-164
2300-6110
Pojawia się w:
Problemy Nauk Stosowanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hardware implementation of parametric algorithm for asynchronously gathered measurement data based on the FPGA technology
Autorzy:
Janowski, T.
Szworski, K.
Zając, R.
Powiązania:
https://bibliotekanauki.pl/articles/332532.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
hardware implementation
FPGA technology
hydroacoustic system
Opis:
The hydroacoustic system based on DOA estimation utilizes passive antenna composed of many hydrophones. The samples of the arriving acoustic signal must be gathered synchronously from each hydrophone. This enables to take advantage of parametric processing signals methods. These methods make possible determination of the amplitude and the phase relationship among particular hydrophones. The newest complex systems made up of many sub modules uses network solutions. In the case of Ethernet network some standards (e.g. Precision Time Protocol) are defined to enable synchronization of the data (samples) gathered from many hydrophones by the clock synchronization. When the antenna consists of few hydrophones then the special concentrator connected point-to-point to hydrophones can be utilized. This article discusses the issue related to PTP as well as concentrator based on FPGA technology, which uses simple UDP protocol. In the case of concentrator the synchronous method of the I/Q detection which not requires synchronous samples acquisition is also presented.
Źródło:
Hydroacoustics; 2009, 12; 83-90
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identifikacija agrobiologicheskogo sostojanija selskokhozjajjstvennykh ugodijj putem izmerenija ehlektroprovodnykh svojjstv gruntovojj sredi
Authentication of agrobiological state of agricultural lands by measuring of properties of ground environment
Autorzy:
Brovariec, A.
Powiązania:
https://bibliotekanauki.pl/articles/77143.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
agricultural land
monitoring
technical system
information system
compensation system
technological progress
special hardware
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2014, 16, 3
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The performance comparison of the DMA subsystem of the Zynq SoC in bare metal and Linux applications
Autorzy:
Fularz, M.
Pieczyński, D.
Kraft, M.
Powiązania:
https://bibliotekanauki.pl/articles/114367.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
FPGA
image processing
hardware accelerator
smart camera
operating system
Opis:
The paper presents results of comparison of the direct memory access (DMA) performance in a Zynq SoC based system working in a bare metal configuration and running the Linux operating system (OS). The overhead introduced by the driver and software components of the Linux OS is evaluated and analyzed. The evaluation is performed on a real life video processing usage scenario involving transfers of significant portions of data to- and from the memory.
Źródło:
Measurement Automation Monitoring; 2017, 63, 5; 189-191
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Large Data Stream Processing : Embedded Systems Design Challenges
Autorzy:
Handzlik, A.
Jabłonski, A.
Powiązania:
https://bibliotekanauki.pl/articles/226898.pdf
Data publikacji:
2010
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
reconfigurable hardware
system on chip
digital signal processing
embedded systems
Opis:
The following paper describes an application of reconfigurable hardware architectures for processing of huge data streams. Radar, sonar and high speed internet networks are typical sources of data that require extreme computing power and resources to enable real time acquisition, processing and management. An approach to monitoring of real time multi-gigabit internet network has been described as a practical application of FPGA based board, designed for fast data processing.
Źródło:
International Journal of Electronics and Telecommunications; 2010, 56, 2; 107-110
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New hardware engine for new operating systems
Autorzy:
Ahmadi, N.
Kaveh, M.
Powiązania:
https://bibliotekanauki.pl/articles/11375.pdf
Data publikacji:
2013
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
hardware engine
new system
operating system
genetic algorithm
chromosome
genetic diversity
problem solution
Opis:
Genetic algorithm is a soft computing method that works on set of solutions. These solutions are called chromosome and the best one is the absolute solution of the problem. The main problem of this algorithm is that after passing through some generations, it may be produced some chromosomes that had been produced in some generations ago that causes reducing the convergence speed. From another respective, most of the genetic algorithms are implemented in software and less works have been done on hardware implementation. Our work implements genetic algorithm in hardware that doesn’t produce chromosome that have been produced in previous generations. In this work, most of genetic operators are implemented without producing iterative chromosomes and genetic diversity is preserved. Genetic diversity causes that not only don’t this algorithm converge to local optimum but also reaching to global optimum. Without any doubts, proposed approach is so faster than software implementations. Evaluation results also show the proposed approach is faster than hardware ones.
Źródło:
International Letters of Natural Sciences; 2013, 05
2300-9675
Pojawia się w:
International Letters of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Control software for a reconfigurable control system for a set of testing devices
Oprogramowanie sterujące rekonfigurowalnego systemu sterowania zestawu urządzeń testujących
Autorzy:
Neska, M.
Majcher, A.
Przybylski, J.
Powiązania:
https://bibliotekanauki.pl/articles/258370.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Eksploatacji - Państwowy Instytut Badawczy
Tematy:
control system
testing device
hardware structure
procedure
PLC
system sterowania
urządzenie testujące
struktura sprzętowa
procedura
sterownik PLC
Opis:
The article presents the PLC control software for a reconfigurable control system, implemented in a series of testing devices, executing durability tests of electronically secured documents. A general methodology of design of a reconfigurable control system is shown. The objective of tasks undertaken was to develop a structure of the software system, and a method of selection of procedures for a PLC programme, to create a full PLC software for each testing device, and the objective was to develop a structure of the user interface for a series of devices. In the article, apparatus for documenting durability testing, using applications of a developed reconfigurable control system are presented, and an example of the configuration of the control system of one of the devices is discussed.
W artykule przedstawiono oprogramowanie sterujące rekonfigurowalnego systemu sterowania zestawem urządzeń realizujących badania trwałości dokumentów z zabezpieczeniem elektronicznym. Przytoczono ogólną metodykę projektowania rekonfigurowalnego systemu sterowania. Przedstawiono strukturę oprogramowania systemu oraz metodę doboru procedur programu przy tworzeniu pełnego oprogramowania sterownika PLC dla poszczególnych urządzeń testujących. Opisano strukturę interfejsu użytkownika typoszeregu urządzeń. Zaprezentowano urządzenia do badania trwałości dokumentów, w których zastosowano aplikacje opracowanego rekonfigurowalnego systemu sterowania oraz omówiono przykładowy proces konfiguracji systemu sterowania jednego z urządzeń.
Źródło:
Problemy Eksploatacji; 2013, 2; 57-68
1232-9312
Pojawia się w:
Problemy Eksploatacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fuzzy-logic kontroller upravleniya rezhimami raboty vetroehlektricheskojj ustanovki
Fuzzy-logic controller of management mode of operation wind power installation
Autorzy:
Sirotjuk, S.
Sirotjuk, V.
Galchak, V.
Powiązania:
https://bibliotekanauki.pl/articles/76618.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
fuzzy logic controller
wind power installation
wind turbine
software
hardware
intelligent system
control system
agricultural purpose
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 4
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hardware configuration of the Unitronics M90 controllers
Konfiguracja sprzetowa sterownikow Unitronics serii M90
Autorzy:
Szreder, M.
Powiązania:
https://bibliotekanauki.pl/articles/791904.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
automation system
hardware configuration
Unitronics M90 controller
programming tool
automated control process
microchip system
universal device
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A Low Power and High Performance Hardware Design for Automatic Epilepsy Seizure Detection
Autorzy:
Rafiammal, S. Syed
Najumnissa, D.
Anuradha, G.
Mohideen, S. Kaja
Jawahar, P. K.
Mutalib, Syed Abdul
Powiązania:
https://bibliotekanauki.pl/articles/963923.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
epilepsy detection
system on chip
implementation
Quadrature Linear Discriminant Analysis
hardware design
seizure detection
Opis:
An application specific integrated design using Quadrature Linear Discriminant Analysis is proposed for automatic detection of normal and epilepsy seizure signals from EEG recordings in epilepsy patients. Five statistical parameters are extracted to form the feature vector for training of the classifier. The statistical parameters are Standardised Moment, Co-efficient of Variance, Range, Root Mean Square Value and Energy. The Intellectual Property Core performs the process of filtering, segmentation, extraction of statistical features and classification of epilepsy seizure and normal signals. The design is implemented in Zynq 7000 Zc706 SoC with average accuracy of 99%, Specificity of 100%, F1 score of 0.99, Sensitivity of 98% and Precision of 100 % with error rate of 0.0013/hr., which is approximately zero false detection.
Źródło:
International Journal of Electronics and Telecommunications; 2019, 65, 4; 707-712
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies