Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "granular materials" wg kryterium: Temat


Tytuł:
A comprehensive constitutive equation for granular materials
Autorzy:
Gudehus, G.
Powiązania:
https://bibliotekanauki.pl/articles/1954568.pdf
Data publikacji:
2000
Wydawca:
Politechnika Gdańska
Tematy:
constitutive equation of soil
critical state
deformation
granular materials
stability analysis
Opis:
constitutive equation is proposed for describing changes of states of granular materials, which are sufficiently characterised by the void ratio and the stress tensor. It may be considered as an extension of the Critical State concept. It is based on recently published hypoplastic equations and covers a wide range of densities, pressures and deformations. A factorial decomposition allows a rather easy separation and determination of material parameters. Two factors depend on a relative void ratio so that it remains within lower and upper bounds. The bounding void ratios decrease monotonously from maximal values to zero with increasing pressure. The same reduction of the void ratio is proposed for an isotropic compression starting from a suspension. Thus a granulate hardness is defined, and a stiffness factor can be determined. Four material parameters can be estimated from classification tests and determined from the asymptotic behaviour in element tests. Four further parameters are determined by calibration; they are rather constant for wide groups of materials. Strength and stiffness values can be derived and used for the analysis of deformations, stability, and flow. The viscous behaviour is modelled by a rate dependent factor with one further parameter. Limitations and possible extensions of this comprehensive approach are also outlined.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2000, 4, 3; 319-342
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A method for determining sieve holes blocking degree
Autorzy:
Lawinska, K. E.
Wodzinski, P.
Modrzewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/110150.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
screen
sieving
screen blocking coefficient
granular materials
Opis:
The aim of this paper is to describe the process of sieve holes blocking. A series of tests and their results revealed a dependence describing the value of an average screen blocking coefficient as a function of two main factors affecting the process. These parameters are the toss indicator and the content of difficult-to-screen particles in the feed. The experiments presented in the paper showed that description in mathematical terms of the sieve holes blocking process is complex and difficult. A third degree polynomial function with two variables enables determination of the value of an average screen blocking coefficient in the processes of screening for specific arrangements: screen–particle–toss indicator–content of difficult-to-screen particles.
Źródło:
Physicochemical Problems of Mineral Processing; 2015, 51, 1; 15-22
1643-1049
2084-4735
Pojawia się w:
Physicochemical Problems of Mineral Processing
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Adaptacja funkcji Bessela do opisu stanu zmieszania jednorodnej mieszaniny ziarnistej
Adaptation of the Bessel function to the description of the condition of mixing homogeneous grain mixture
Autorzy:
Rut, J.
Powiązania:
https://bibliotekanauki.pl/articles/228358.pdf
Data publikacji:
2012
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
funkcja Bessela
jednorodna mieszanina ziarnista
mieszanie materiałów ziarnistych
analiza wariancji
Bessel function
homogeneous grain mixture
mixing granular materials
analysis of variance
Opis:
W artykule przedstawiono sposób wykorzystania funkcji Bessela do opisu stanu zmieszania jednorodnej mieszaniny ziarnistej. W badaniach wykorzystano jeden układ ziarnisty składający się z ziaren kukurydzy różniący się barwą i wilgotnością. Do oceny miary rozproszenia trasera na powierzchni badanych przekrojów poprzecznych mieszalnika zastosowano metodę analizy wariancji.
In the article a way of using the Bessel function for the description of state of mixing homogeneous grain mixture is presented. In research consisting used a grain system the corn, of different colour and humidity. The method of variance analysis was used to the estimation on the surface of dispersing the tracer of examined cross sections of the agitator.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2012, 1; 47-49
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of kinetics of multicomponent, heterogeneous granular mixtures – Laminar and turbulent flow approach
Autorzy:
Królczyk, J. B.
Powiązania:
https://bibliotekanauki.pl/articles/184979.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mixing
granular materials
kinetics
turbulent stage
laminar stage
mieszanie
materiał sypki
kinetyka
etap burzliwy
etap laminarny
Opis:
Mixing of granular materials is unquestionably important. Mixing solids is common in industrial applications and frequently represents a critical stage of the processes. The effect of mixing determines the quality of the products. Achieving a gas or liquid mixture ideally homogeneous in terms of composition in the case of dissolving components is not that difficult, while in case of granular materials that usually differ in sizes and densities, obtaining a homogenous mixture is practically impossible. The aim of the paper is to present the kinetics of mixing of a multicomponent, nonhomogeneous granular mixture. For the first time in mixing of granular materials, a reference has been made to the terminology used in kinematics of fluid mixtures to determine the state of the mixture: turbulent or laminar. By means of statistical analysis the mixing process was divided into two stages. The initial phase of the process was called the stage of turbulent changes, due to large differences in the quality of the observed mixtures; the final step of the process was called the stage of laminar, stable changes, where further mixing did not result in a significant improvement in quality. The research was conducted in industrial conditions in a two-tonne mixer.
Źródło:
Chemical and Process Engineering; 2016, 37, 2; 161-173
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of pressure evolution in granular materials in converging bins during filling and emptying processes
Autorzy:
Sielamowicz, I.
Mróz, Z.
Powiązania:
https://bibliotekanauki.pl/articles/1955766.pdf
Data publikacji:
2003
Wydawca:
Politechnika Gdańska
Tematy:
granular materials
pressure
elastic and elasto-plastic model
filling
empting
Opis:
A simplified analysis of deformation and stress states in converging hoppers during filling and discharge of granular material is presented. In particular we discuss a method for solving the set of differential equations governing the flow of granular material in a plane wedge hopper. The equilibrium conditions and stress-strain relations are satisfied for the planar slice elements assuming the dependence of displacement and stress on the Cartesian coordinate z. The transient flow of an icompressible, cohesionless granular material in a two-dimensional converging hopper is considered. We assume the material to be in elastic or elasto-plastic states within the hopper satisfying the Coulomb yield condition and the non-associated flow rule. The paper presents a detailed analysis of the evolution of pressure acting on the hopper wall during the filling and emptying processes when the initial active state of pressure is transformed into a passive state. Analytical and numerical analyses are presented. It is shown that at the initial stage of the emptying process a considerable switch overpressure develops, exceeding the steady-state passive pressure several times.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2003, 7, 4; 643-666
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie temperatury i wilgotności w złożu jednorodnej mieszaniny ziarnistej
Research temperature and humidity in the layer homogeneous grain mixture
Autorzy:
Rut, J.
Powiązania:
https://bibliotekanauki.pl/articles/228553.pdf
Data publikacji:
2013
Wydawca:
Wyższa Szkoła Menedżerska w Warszawie
Tematy:
materiały ziarniste
mieszanie materiałów ziarnistych
pszenica
wilgotność
temperatura
wyróżniki jakościowe
granular materials
mixing of granular materials
wheat
humidity
temperature
quality differentiators
Opis:
W artykule przedstawiono wyniki badań dotyczące wyznaczania rozkładu temperatury i wilgotności w złożu jednorodnej mieszaniny ziarnistej, w różnych udziałach procentowych. Dokonano oceny analizy wyróżników jakościowych ziarna. Badania wykonano na ziarnie pszenicy. Do uzyskania jednorodnej mieszaniny ziarnistej wykorzystano metodę mieszania materiałów w przesypie przy użyciu laboratoryjnego mieszalnika przesypowego.
The article presents a research of temperature and humidity distribution in the layer homogeneous mixture granular, in various percentage proportions and analysis of grain quality parameters. Research were made on wheat grain. To obtain a homogeneous mixture of granular materials used the method of mixing using laboratory flow agitator.
Źródło:
Postępy Techniki Przetwórstwa Spożywczego; 2013, 1; 27-31
0867-793X
2719-3691
Pojawia się w:
Postępy Techniki Przetwórstwa Spożywczego
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative analysis of the acoustic properties of granular materials determined with the use of impedance tube
Autorzy:
Kosała, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/24202011.pdf
Data publikacji:
2022
Wydawca:
Politechnika Poznańska. Instytut Mechaniki Stosowanej
Tematy:
granular materials
sound absorption coefficient
sound transmission loss
materiały ziarniste
współczynnik pochłaniania dźwięków
strata transmisji dźwięku
Opis:
The results of acoustic property tests for six types of granular materials: perlite, vermiculite, active coconut carbon, rubber granulates, pumice and wood chips, which can be used in noise protection structures, are shown in the article. The characteristics of the normal incidence sound absorption coefficient and the normal incidence sound transmission loss for material specimens with seven thicknesses in the range of 10-100 mm were determined based on the results of experimental tests carried out with the use of an impedance tube. The relationships between the first resonant absorption frequencies and the thicknesses of material specimens were determined. Single-number indices for the tested materials, in the form of the weighted sound absorption coefficients, were determined. Subsequently, dependencies of these indices on the surface mass of the tested materials were determined. The research showed that three materials, perlite, vermiculite and active coconut carbon, were distinguished among the examined granules with the best sound-absorbing and sound-insulating properties. Active coconut carbon had the best sound-insulating properties among the granular materials tested.
Źródło:
Vibrations in Physical Systems; 2022, 33, 3; art. no. 2022321
0860-6897
Pojawia się w:
Vibrations in Physical Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Computational domain discretization for CFD analysis of flow in a granular packed bed
Autorzy:
Sosnowski, Marcin
Gnatowska, Renata
Sobczyk, Jacek
Wodziak, Waldemar
Powiązania:
https://bibliotekanauki.pl/articles/281600.pdf
Data publikacji:
2019
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
granular materials
computational domain
discretization
CFD
Opis:
The paper reports results of an analysis concerning the infuence of a computational domain discretization method on the numerical stability of a model as well as the calculation error. The topology of a packed bed of a granular material consisting of granules contacting tangentially in one point makes the modeling of heat and mass transfer due to the fluid flow in such a domain a chalenging task. Therefore, the contribution of this paper constitutes a summary of discretization methods with discussion and guidelines allowing one to effectively select the most favourable method dedicated to discretization of the domain. The validation using Particle Image Velocimetry and evaluation of the impact of inflow velocity on the experimental and numerical research results are also presented in the paper.
Źródło:
Journal of Theoretical and Applied Mechanics; 2019, 57, 4; 833-842
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concept of an adaptive-tuned particles impact damper
Autorzy:
Żurawski, Mateusz
Zalewski, Robert
Chiliński, Bogumił Daniel
Powiązania:
https://bibliotekanauki.pl/articles/2055066.pdf
Data publikacji:
2020
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
particles impact damper
adaptive-passive damping
smart materials
granular materials
Opis:
The most popular devices for attenuation of mechanical vibrations are dampers or shock absorbers. Two main energy dissipation strategies can be generally distinguished: passive and active (semi-active). Passive vibration isolation methods are the most commonly used, mainly because of their simplicity and low maintenance costs. Among passive vibration attenuation techniques, also Particle Impact Dampers (PID) are involved. Classical PID solutions have some certain limitations. This paper aims at presenting the new concept of an adaptive tuned PID damper that can pretend to be placed among semi-active energy dissipation methods.
Źródło:
Journal of Theoretical and Applied Mechanics; 2020, 58, 3; 811-816
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of liquefaction potential for loose minefill slopes
Autorzy:
Kudella, P.
Powiązania:
https://bibliotekanauki.pl/articles/1954561.pdf
Data publikacji:
2022-02-07
Wydawca:
Politechnika Gdańska
Tematy:
liquefaction
granular materials
hypoplasticity
instability
failure
Opis:
Uncompacted embankments of certain fine sands exhibit a spontaneous liquefaction potential, which cannot be evaluated basing on undrained shear strength alone. A novel procedure for stability analysis has been developed, basing on Hill's stability criterion and a hypoplastic constitutive law. With given relative densities, assumed initial stress states and variations of perturbation directions, stability or instability of slope sections can be assessed. Catastrophic landslides observed in the past could thus be explained.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2000, 4, 3; 439-451
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evolution of shear localisation in earth pressure problems of a retaining wall
Autorzy:
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/1986988.pdf
Data publikacji:
2002
Wydawca:
Politechnika Gdańska
Tematy:
earth pressure
granular materials
finite element method
hypoplasticity
polar continuum
retaining wall
shear localization
Opis:
The paper deals with numerical investigations of the evolution of shear localisation in granular bodies for earth pressure problems of a retaining wall in conditions of plane strain. The passive and active failure of a retaining wall in sand is discussed. The calculations are carried out with a rigid and very rough retaining wall undergoing horizontal translation, rotation around the top and rotation around the bottom. The behaviour of dry sand is numerically modelled with a finite element method using a hypoplastic constitutive relation within a polar (Cosserat) continuum. The constitutive relation is obtained through extension by polar quantities, viz. rotations, curvatures and couple stresses, using the mean grain diameter as a characteristic length. During FE-calculations, the attention is laid on the influence of different wall movements on shear localisation. In addition, the effects of the initial void ratio, distribution of the initial void ratio and mean grain diameter, pressure level and size of the sand body and retaining wall is investigated in the case of a passive wall translation. The FE-results are compared with corresponding experimental results of laboratory model tests.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2002, 6, 3; 387-410
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fe-analysis of patterning of shear zones in granular bodies for earth pressure problems of a retaining wall
Autorzy:
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/241166.pdf
Data publikacji:
2004
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
earth pressure
granular materials
finite element method
hypoplasticity
polar continuum
retaining wall
shear localization
Opis:
The evolution of shear zones in granular bodies for earth pressure problems of a retaining wall in conditions of plane strain was analyzed. The passive and active failure of a retaining wall was discussed. The calculations were carried out with a rigid and very rough retaining wall undergoing horizontal translation, rotation around the top and rotation around the bottom. The behaviour of dry sand was numerically modelled with a finite element method using a hypoplastic constitutive relation with polar extensions. Attention was paid to the influence of different wall movements on shear localization. The initial void ratio was assumed to be non-uniformly distributed. The geometry of calculated shear zones was compared with corresponding experimental results of laboratory model tests.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2004, 51, 4; 317-348
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FE-modelling of behaviour of granular anchors in rock and soils
Autorzy:
Wehr, J.
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/1954551.pdf
Data publikacji:
2000
Wydawca:
Politechnika Gdańska
Tematy:
anchor
finite element method
granular materials
hypoplasticity
polar continuum
Opis:
The paper is concerned with granular anchors in rock and soils. Model tests and numerical calculations were performed. The effect of different parameters on the behaviour of anchors was investigated: anchor length, anchor diameter, initial density and mean grain diameter of the granular material, anchor roughness and stiffness of the borehole wall. The experiments were modelled with a finite element method and a polar hypoplastic constitutive relation. The relation can capture the salient properties of granular materials during shearing. A satisfactory agreement between experiments and numerical calculations was obtained. Advantages and limitations of granular anchors in rock and soils were outlined.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2000, 4, 3; 517-526
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Introduction to hypoplasticity (GeoMath1)
Autorzy:
Kolymbas, D.
Powiązania:
https://bibliotekanauki.pl/articles/1954567.pdf
Data publikacji:
2000
Wydawca:
Politechnika Gdańska
Tematy:
granular materials
yield
hysteresis
dilatancy
constitutive equation
Opis:
Rational mechanics offers a tool to objectively describe the mechanical behaviour of granular materials by means of non-linear tensorial functions. This new framework is called hypoplasticity and is characterized by the simplicity of the mathematical formulations. The stress dependency of incremental stiffness, yield, loading-unloading hysteresis and dilatancy-contractancy are included. One of the features of hypoplasticity is that yield is a natural outcome of the theory and needs not be calibrated a priori. Also loss of uniqueness and localization of deformation are realistically predicted by hypoplasticity.
Źródło:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk; 2000, 4, 3; 343-366
1428-6394
Pojawia się w:
TASK Quarterly. Scientific Bulletin of Academic Computer Centre in Gdansk
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigations of shear localization in granular bodies within an anisotropic micro-polar hypoplasticity
Autorzy:
Tejchman, J.
Powiązania:
https://bibliotekanauki.pl/articles/241368.pdf
Data publikacji:
2005
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
bedding plane
granular materials
hypoplasticity
micropolar theory
shear zone
texturial anisotropy
Opis:
The paper focuses on the numerical analysis of the effect of texturial anisotropy on shear localization in cohesionless granular materials. For simulation of the mechanical behaviour of a granular material during a monotonous deformation path, a hypoplastic constitutive model was used. To take into account a characteristic length of micro-structure, the constitutive model was extended by micro-polar terms. To take into account texturial effects, the granular hardness was modified. The calculations were carried out with a sand specimen during plane strain compression under constant lateral pressure. A stochastic and uniform distribution of the initial void ratio in the granular specimen was assumed. In addition, shear localization for two different uniform initial void ratios was investigated.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2005, 52, 4; 351-371
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies