Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "geometrical method" wg kryterium: Temat


Tytuł:
Multi-Channel System for Sound Creation in Open Areas
Autorzy:
Gołaś, A.
Suder-Dębska, K.
Powiązania:
https://bibliotekanauki.pl/articles/176685.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sound creation system
open area
spatial impression
noise
geometrical method
inverse image source method
Opis:
There are typically two systems in use for sound reinforcement in open areas: the central, “wall of sound” system with speakers localized at the sides of the stage, and the zone system, in which additional speakers are introduced to obtain a uniform sound pressure level throughout the area of listening. In the past two decades the line array systems gained great popularity. The main purpose of their use is to obtain a uniformly distributed sound level throughout the listening area in order to achieve good speech intelligibility. The present paper aims to present an alternative and original method of sound reinforcement in open areas which is in contrast to the above solutions. This new method allows achieving a uniformly distributed sound pressure and good speech intelligibility in the area of interest, and also allows to gain spatial sound impression that accompanies sound reproduction in concert halls. Another advantage of the proposed system is the reduction of the sound level outside the area of interest, i.e. reduction of the noise level outside the area of listening.
Źródło:
Archives of Acoustics; 2012, 37, 3; 323-329
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sensitivity Analysis of Acoustic Field Parameters on a Change of Boundary Conditions in a Room
Autorzy:
Suder-Dębska, K.
Czajka, I.
Czechowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/177639.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
sensitivity analysis
acoustic parameter
geometrical method
sound absorption coefficient
noise of power machines
Opis:
The area of environmental protection concern minimises the impact that technical objects have on the environment. Usually the most effective way of protecting the environment is to influence the source of the problem. For this reason studies are conducted to modify the construction of machines, power machines in particular, so as to minimise their impact on the environment. In the case of environmental protection from noise it is most convenient to carry out measurements in an anechoic chamber. Unfortunately, this is possible only in very limited circumstances. In all other cases measurements are performed using an engineering method or the survey method, both of which are described in the standards and by taking into account the so-called environmental corrections. The obtained results are burdened with greater error than those of measurements in an anechoic chamber. Therefore, it would seem advantageous to develop a method of obtaining similar and reliable results as those in an anechoic chamber, but in a reverberant field. The authors decided to use numerical modelling for this purpose. The main objective of this work is a comprehensive analysis of the numerical model of a laboratory designed for acoustic tests of selected power machines. The geometry of a room comprising an area of analysis is easy to design. The main difficulty in modelling the phenomena occurring in the analysed area can be the lack of knowing the boundary conditions. Therefore, the authors made an attempt to analyse the sensitivity of various acoustic parameters in a room in order to change these boundary conditions depending on the sound absorption coefficient.
Źródło:
Archives of Acoustics; 2014, 39, 3; 343-350
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Acoustic Panels Inspired by Nature
Autorzy:
Borkowski, Bartłomiej
Suder-Dębska, Katarzyna
Wiciak, Jerzy
Szlachta, Anna Maria
Powiązania:
https://bibliotekanauki.pl/articles/1953507.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
acoustic panel
absorption
reflection
design process
lava cave
glacier cave
geometrical method
3D modelling
concept design
Opis:
The article presents the approach to the design process of acoustic panels based on the scientific research. This approach is based on combining the technical and the design competences to develop the innovative product value for the concept of acoustic panels. The article presents the concepts of two new acoustic panels – an absorbing and scattering panel and a panel reflecting sound waves. The first part of the article presents the starting point for the presented project – the acoustic research and the inspiration for both types of presented solutions. Next, the materials possible to use were discussed, which could reproduce the natural acoustic properties of the lava and glacier caves. The next part presents consecutive stages of the product development in a modern form, ensuring the expected acoustic properties. The last part of the article presents a fully functional solution and proposes further research and development directions.
Źródło:
Archives of Acoustics; 2021, 46, 1; 135-146
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Labyrinth screw pump theory
Teorija labirintno-vintovykh nasosov
Autorzy:
Andrenko, P.
Lebedev, A.
Powiązania:
https://bibliotekanauki.pl/articles/76818.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
screw pump
working process
flow characteristics
design method
physical model
geometrical dimension
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2014, 16, 6
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Droppers’ stiffness influence on dynamic interaction between the pantograph and railway catenary
Autorzy:
Bryja, Danuta
Hyliński (Popiołek), Adam
Powiązania:
https://bibliotekanauki.pl/articles/215741.pdf
Data publikacji:
2019
Wydawca:
Instytut Kolejnictwa
Tematy:
railway catenary
pantographs
droppers’ slackening
geometrical non-linearity
vibration simulation
validation of simulation method
Opis:
Droppers connecting the contact wire and messenger wire of the railway catenary are characterized by zero or negligible compressive stiffness, hence they become slack under compression that is similar to bars’ buckling. The paper presents a numerical analysis of the influence of droppers slackening phenomenon on the dynamic interaction between the pantograph and catenary. The analysis is based on a simulation method presented by the authors in previous papers, in which the catenary is modelled as a complex cable system. In this paper, the simulation method is modified by introducing the residual compressive stiffness of droppers that is assumed as a given percent of tensile stiffness. Modification leads to geometrically non-linear equations of motion of the pantograph-catenary system. Two different algorithms for solving the problem of non-linearity are proposed, in both of them the Newmark numerical integration method is applied. Results of dynamic response simulations performed for different values of residual compressive stiffness of droppers are presented and compared. It is shown that the contact wire does not cooperate with the messenger wire in a large area around the pantograph when the compressive stiffness of droppers is assumed zero. As a result, the pantograph moving at high speed induces severe vibrations of the catenary. It is also shown that droppers should be designed to have the residual compressive stiffness equal to at least one percent of their tensile stiffness. This is sufficient to ensure an appropriate cooperation between messenger wire and contact wire, which is demonstrated by simulation results fulfilling requirements given in the standard PN-EN 50318: 2002.
Źródło:
Problemy Kolejnictwa; 2019, 183; 89-98
0552-2145
2544-9451
Pojawia się w:
Problemy Kolejnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Integration of experimental and computational methods for identifying geometric, thermal and diffusive properties of biomaterials
Autorzy:
Weres, J.
Kujawa, S.
Olek, W.
Czajkowski, L.
Powiązania:
https://bibliotekanauki.pl/articles/25176.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
experimental method
computational method
identification
geometrical property
thermal property
diffusive property
biomaterial
heat transport
water transport
agro-food product
forest product
Źródło:
International Agrophysics; 2016, 30, 2
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometrical and optical analysis of small-sized parabolic trough collector using ray tracing tool SolTrace
Autorzy:
Singh, Raman Kumar
Chandra, Prakash
Powiązania:
https://bibliotekanauki.pl/articles/27312206.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
parabolic trough collector
SolTrace
Monte Carlo ray tracing method
nonuniform heat flux distribution
optical analysis
geometrical analysis
Opis:
The present work is aimed at geometrical optimization and optical analysis of a small-sized parabolic trough collector (PTC). Improving the performance of parabolic trough collectors can greatly justify the use of solar energy. An optimized curvature geometry, the location of the absorber tube, and the heat flux distribution along the circumference of the absorber tube are major features in the geometric optimization and optical modelling of parabolic trough collectors. Rim angle, aperture width, the diameter of the absorber tube, receiver position, and the optimum value of heat flux are the major parameters considered in this work for geometrical and optical analysis. The Monte Carlo ray tracing method has been adopted for analysis. The non-uniform heat flux distribution profile obtained from optical analysis of the proposed parabolic trough collector has been compared with the profile available in the literature, and good agreement has been obtained, which proves the feasibility and reliability of the model and method used for this study. An experimental new small-sized parabolic trough collector has been fabricated for the optimized rim angle of 90 deg after a successful laser light feasibility test. The effect of the absorber tube position along the optical axis on the heat flux profile was analysed and found to be substantial. Furthermore, the sensitivity analysis of the parabolic trough collector using the software applied has been discussed separately.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 35--61
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zastosowanie analizy składowych głównych w badaniu wpływu nawilżania nasion łubinu żółtego odmiany Radames na ich wielkość
Application of an analysis of main components in a research of the influence of moistening of yellow lupin seeds of radames variety on their size
Autorzy:
Kamińska, A.
Andrejko, D.
Powiązania:
https://bibliotekanauki.pl/articles/290721.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
metoda składowych głównych
analiza regresji
łubin
wymiary geometryczne
nasiona
principal components method
regression analysis
lupine
geometrical dimensions
seeds
Opis:
W pracy zastosowano wielowymiarową metodę statystyczną - analizę składowych głównych (PCA) w celu nadania znaczenia pojęciu "wielkość" nasiona. Wyodrębniono jeden czynnik generujący jednocześnie wszystkie trzy wymiary geometryczne nasiona (długość, szerokość i grubość). Zależność funkcyjną między wilgotnością a otrzymaną składową główną opisano równaniem regresji.
A multidimensional statistic method: principal component analysis (PCA) was applied in the study to give significance to the motion - seed size. One factor which at the same time generates all three geometrical dimensions of a seed (length, width and thickness) was separated. Functional relation between moistness and obtained principal component was described with a regression equation.
Źródło:
Inżynieria Rolnicza; 2006, R. 10, nr 7(82), 7(82); 241-246
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metoda relaksacji dynamicznej w analizie zginanych elementów żelbetowych
Dynamic relaxation method in analysis of reinforced concrete bent elements
Autorzy:
Szcześniak, A.
Stolarski, A.
Powiązania:
https://bibliotekanauki.pl/articles/209238.pdf
Data publikacji:
2015
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
elementy żelbetowe
nieliniowość fizyczna
nieliniowość geometryczna
metoda relaksacji dynamicznej
metoda długości łuku
reinforced concrete elements
physical nonlinearity
geometrical nonlinearity
dynamic relaxation method
arc-length method
Opis:
W pracy przedstawiono metodę analizy nieliniowego zachowania elementów żelbetowych poddanych działaniu krótkotrwałego obciążenia statycznego. Przeprowadzono rozważania w zakresie modelowania procesów odkształcania elementu żelbetowego. Metodę analizy wytężenia układu konstrukcyjnego opracowano z wykorzystaniem metody różnic skończonych. Do rozwiązania układów nieliniowych równań równowagi zastosowano metodę relaksacji dynamicznej, która po wprowadzeniu tłumienia krytycznego pozwala na opis statycznego zachowania elementu konstrukcyjnego. W celu zwiększenia skuteczności metody w zakresie analizy pokrytycznej, w procedurze obliczeniowej uwzględniono parametr długości łuku na ścieżce równowagi.
The paper presents a method for the analysis of nonlinear behaviour of reinforced concrete bent elements subjected to short-term static load. The considerations in the range of modelling of deformation processes of reinforced concrete element were carried out. The method of structure effort analysis was developed using the finite difference method. The Dynamic Relaxation Method, which — after introduction of critical damping — allows for description of the static behaviour of a structural element, was used to solve the system of nonlinear equilibrium equations. In order to increase the method effectiveness in the range of the post-critical analysis, the Arc Length Parameter on the equilibrium path was introduced into the computational procedure.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2015, 64, 4; 223-239
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of quadrilateral discontinuity size on the energy absorption of structural steel profiles
Wpływ wielkości czworobocznych nieciągłości na pochłanianie energii w stalowych profilach strukturalnych
Autorzy:
Estrada, Q.
Szwedowicz, D.
Majewski, T.
Martinez, E.
Rodriguez-Mendez, A.
Powiązania:
https://bibliotekanauki.pl/articles/301235.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
thin-walled structure
geometrical discontinuities
finite element method
energy performance
struktury cienkościenne
nieciągłości geometryczne
metoda elementów skończonych
pochłanianie energii
Opis:
In this paper the effect of discontinuity size on energy absorption performance of steel square profiles is reported. The analysis consists of finite element simulations and experimental results of the compression strength of steel profiles with discontinuities. The discontinuities were placed at the mid span of the profiles in two walls opposite to each other. Square, rectangular and diamond initiators were evaluated at different scales. The numerical results determined the size intervals that present a good energy absorption performance in each case. Energy absorption capabilities were increased up to 12.54% with respect to a structure without discontinuities. Additionally, the peak load value (Pmax) was decreased 25.97% with the implementation of a diamond initiator. For structures with discontinuities with major axis close to the profile width, a buckling effect was observed. Finally, it was observed that the size of the initiators contributes to reduce the peak load (Pmax) value.
W pracy przedstawiono analizę wpływu rozmiaru nieciągłości na pochłanianie energii przez stalowe profile o przekroju kwadratowym. Analiza przedstawia wyniki symulacji elementami skończonymi próby ściskania profili stalowych z nieciągłościami oraz porównanie z danymi eksperymentalnymi. Nieciągłości zostały usytuowane w środku profilu w dwóch przeciwległych ścianach. W pracy zostały przebadane nieciągłości o formach kwadratowych, prostokątnych i rombowych dla różnych wymiarów. Stwierdzono wzrost o 12,54% możliwości pochłaniania energii w porównaniu dla struktur bez nieciągłości. Dodatkowo, w przypadku nieciągłości rombowych stwierdzono spadek wartości siły maksymalnej (Pmax) o 25,97%. Zaobserwowano występowanie efektu wyboczenia dla nieciągłości rombowej gdy wymiar jej osi zbliża się do szerokości profilu. Zaobserwowano, ze rozmiar nieciągłości wpływa na redukcje wartości maksymalnego obciążenia oraz w tym samym czasie na obniżenie pochłanianej energii.
Źródło:
Eksploatacja i Niezawodność; 2016, 18, 2; 186-193
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis Of Die Design For The Stamping Of A Bathtub
Analiza projektu narzędzi dla procesu tłoczenia wanny
Autorzy:
Hojny, M.
Woźniak, D.
Głowacki, M.
Żaba, K.
Nowosielski, M.
Kwiatkowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/356251.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
deep drawing
bathtub
restraining force
geometrical drawbead
finite element method
tłoczenie głębokie
wanna
siła ograniczająca
model geometryczny
metoda elementów skończonych
Opis:
The paper presents example results of numerical and photogrammetric analysis leading to identify the causes of cracking and wrinkling during bathtub W1200 production. The verification of tools for the stamping of bathtub W1200 was performed using finite element method and photogrammetric system ATOS Triple Scan. A series of industrial tests was conducted to identify the model parameters. The major and minor strain distributions obtained from the finite element simulations were used in conjunction with the forming limit diagram to predict the onset of fracture. In addition, the effects of blank holder pressure and friction on the occurrence of fracture and wrinkling were investigated.
W artykule przedstawiono przykładowe wyniki analiz numerycznych i fotogrametrycznych mających na celu identyfikację przyczyn powstawania fałdowania i pękania wanny serii W1200 w trakcie cyklu produkcyjnego. Weryfikacja narzędzi przeznaczonych do tłoczenia wanny W1200 została przeprowadzona przy użyciu metody elementów skończonych oraz precyzyjnego systemu fotogrametrycznego ATOS Triple Scan. W trakcie prac badawczych przeprowadzono cykl procesów nadzorowanych procesu produkcyjnego mającego na celu identyfikację parametrów modelu numerycznego. Odkształcenia duże i małe wyznaczone na podstawie symulacji numerycznych w połączeniu z krzywą odkształceń granicznych (KOG) pozwoliły na identyfikację krytycznych rejonów wytłoczki narażonych na fałdowanie i pękanie. Dodatkowo w trakcie przeprowadzonych prac przeanalizowano wpływ warunków tarcia oraz nacisku w kontekście powstawania fałdowania i pękania wytłoczki.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2A; 661-666
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of compound curves adapted to the satellite measurements
Autorzy:
Koc, W.
Powiązania:
https://bibliotekanauki.pl/articles/223637.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
railway track
satellite measurements
geometrical system
compound curves
design method
tor kolejowy
pomiary satelitarne
układ geometryczny
krzywe złożone
metoda projektowania
Opis:
The paper deals with a novelty related to the design of a region for an alternative railway track direction adequate for mobile satellite measurements. The new approach may become particularly useful in the design of the existing track axis control when the determination of both the main track directions becomes impossible. The only solution in that case is to apply to the geometrical system two circular arcs of a different radius, namely, to take advantage of compound curves. In the presented method the design of a new system is carried out by the use of the local system of coordinates. The solution of the design problem is aided by mathematical recording and is based on the determination of some universal equations describing the entire geometrical system. This procedure takes place sequentially involving consecutive parts of the system. The method has been illustrated by an appropriate calculation example.
Źródło:
Archives of Transport; 2015, 34, 2; 37-49
0866-9546
2300-8830
Pojawia się w:
Archives of Transport
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie cech strukturalnych i geometrycznych podczas sortowania wytrzymałościowego tarcicy konstrukcyjnej metodą wizualną
Testing structural and geometric strengths while visual sorting of structural timber
Autorzy:
Wdowiak, A.
Powiązania:
https://bibliotekanauki.pl/articles/162619.pdf
Data publikacji:
2017
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
tarcica
sortowanie
klasyfikacja wytrzymałościowa
metoda wizualna
właściwości geometryczne
właściwości strukturalne
sawn timber
sorting
strength classification
visual method
geometrical characteristics
structural characteristics
Opis:
W artykule zaprezentowano analizę cech strukturalnych i geometrycznych podczas sortowania wytrzymałościowego tarcicy konstrukcyjnej metodą wizualną. Skoncentrowano się na zagadnieniach dotyczących zasad klasyfikacji tarcicy konstrukcyjnej iglastej. Ponadto omówiono wymagania wilgotnościowe, wymiarowe, jakościowe tarcicy i sposoby jej oznakowania. Znacząco przytoczono metody badania niektórych wad strukturalnych i wad obróbki drewna.
The article presents the analysis of structural and geometrical features while visual sorting of structural sawn timber. Significant emphasis was placed on classification rules for coniferous timber. In addition, moisture, dimension, quality and marking requirements were discussed. Defect testing methods were also thoroughly described in this article.
Źródło:
Przegląd Budowlany; 2017, 88, 12; 42-46
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technological quality of teeth of a cylindrical gears grinded with use of profile dividing method
Jakość technologiczna uzębień kół zębatych walcowych szlifowanych metodą kształtowo-podziałową
Autorzy:
Płonka, S.
Jędrzejczyk, D.
Zyzak, P.
Powiązania:
https://bibliotekanauki.pl/articles/175894.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
grinding of cylindrical gears
profile dividing grinding method
manufacturing accuracy
geometrical accuracy
surface layer
szlifowanie kół zębatych
metoda kształtowo-podziałowa
dokładność wykonania
dokładność geometryczna
warstwa wierzchnia
Opis:
The study presents investigation results of technological quality of teeth of a cylindrical gears made of 18CrMo4 steel, carburized, quenched and tempered, and grinded with use of profile dividing method on grinding machine of Höfler Rapid 900 type. It have been included investigation results of geometrical accuracy and selected properties of surface layer of the teeth after hobbing operation, thermal-chemical treatment and grinding operation.
W pracy przedstawiono analizę wyników badań jakości technologicznej uzębień kół zębatych walcowych ze stali 18CrMo4 nawęglanych, hartowanych i odpuszczanych oraz szlifowanych metodą kształtowo-podziałową na szlifierce Rapid 900 firmy Höfler. Wykonano badania dokładności geometrycznej i wybranych właściwości warstwy wierzchniej zębów obrobionych frezowaniem obwiedniowym oraz obrobionych cieplno-chemicznie i szlifowanych.
Źródło:
Advances in Manufacturing Science and Technology; 2018, 42, 1-4; 5-20
0137-4478
Pojawia się w:
Advances in Manufacturing Science and Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An initially deformed flat frame finite element
Autorzy:
Zamorowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/230223.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
deformacja początkowa
rama płaska
nieliniowość geometryczna
przemieszczenie duże
obrót duży
obrót mały
metoda elementów skończonych
initial deformation
flat frame
geometrical nonlinearity
large displacements
large rotation
small rotation
finite element method
Opis:
The paper presents the author’s non-linear FEM solution of an initially stressless deformed flat frame element, in which the nodes are situated along the axis of the bar initially straight. It has been assumed that each node may sustain arbitrary displacements and rotation. The solution takes into account the effect of shear, the geometrical non-linearity with large displacements (Green-Lagrange’s strain tensor) and moderate rotations (i.e. such ones which allow a linear-elastic behaviour of the material) and alternative small rotations when the second Piola-Kirchhoff stress tensor is applied. This solution is based on [1], concerning beams without any initial bow imperfections. The convergence of the obtained results at different numbers of nodes and Gauss points in the element was tested basing on the example of circular arcs with a central angle of 120º-180º. The analysis concerned elements with two, three, five, seven, nine and eleven nodes, for the same number of points of numerical integration and also with one more or less. Moreover, the effect of distributing the load on the convergence of the results was analyzed.
Źródło:
Archives of Civil Engineering; 2013, 59, 3; 381-400
1230-2945
Pojawia się w:
Archives of Civil Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies