Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "gas distribution" wg kryterium: Temat


Tytuł:
Analiza sygnału świetlnego odbitego od powierzchni w diagnostyce obiektów technicznych
Analysis of light signal reflected of a surface in technical system diagnostics
Autorzy:
Bogdan, M.
Błachnio, J.
Powiązania:
https://bibliotekanauki.pl/articles/327688.pdf
Data publikacji:
2006
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
łopatka
turbina gazowa
rozkład widmowy RGB
stal 2H13
akwizycja obrazów
przegrzanie struktury
gas turbine scoop
RGB spectrum distribution
steel 2H13
image analysis
structure overheating
Opis:
W artykule przedstawiono warunki badań dotyczące oddziaływania obciążeń cieplnych o wysokiej temperaturze na próbki ze stali 2H13. Starano się powiązać temperaturę wygrzewania (zmianę barwy badanych powierzchni) ze zmianami mikrostruktury warstwy wierzchniej badanych próbek. Zatem z punktu widzenia diagnostyki obiektów technicznych, w sposób bezinwazyjny starano się uzyskać ważną informację diagnostyczną, która w praktyce może posłużyć do oceny zmian mikrostruktury lub też stanu przegrzania materiału w eksploatacji elementów maszyn.
In this article, main emphasis was put on determining the influence of high temperature on steel 2H13 samples. Attempted was linking the high temperature of heating with change of tested surface color and changes in microstructure of sample's surface layer. In terms of technical system diagnostics, in a non-invasive manner obtaining important diagnostic information was attempted, which in practice can be used for evaluation of microstructure changes as well as the state of overheating in machine elements operation.
Źródło:
Diagnostyka; 2006, 2(38); 177-185
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wykorzystanie teorii zbiorów rozmytych do wyznaczania dostaw gazu ziemnego z sieci niskiego ciśnienia
Application of fuzzy logic theory to determine gas delivery in low-pressure distribution networks
Autorzy:
Słomiński, P.
Nowakowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/156736.pdf
Data publikacji:
2006
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
teoria zbiorów rozmytych
wyznaczanie dostaw gazu ziemnego
sieci niskiego ciśnienia
fuzzy logic theory
determine gas delivery
distribution networks
Opis:
Opisano koncepcję wykorzystania teorii zbiorów rozmytych do szacowania ilości gazu dostarczanych odbiorcom przyłączonym do sieci niskiego ciśnienia. Cechy systemów dystrybucyjnych gazu powodują, że nie jest możliwe pozyskanie pełnej informacji o ilościach odebranych przez tych odbiorców. Zaproponowany sterownik rozmyty umożliwia pozyskanie dokładniejszych danych o wartości rocznych dostaw i w związku z tym może być przydatnym narzędziem także do monitorowania strat gazu.
The concept of using fuzzy logic theory to estimate natural gas quantity delivered to consumers connected to the low pressure network has been presented. Features of natural gas distributing systems make the whole information about consumer gas consumption is not available. The proposed fuzzy logic driver enables us to achieve more accurate data about one-year delivery and it can be also a useful tool of gas losses monitoring.
Źródło:
Pomiary Automatyka Kontrola; 2006, R. 52, nr 2, 2; 17-20
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Distribution and origin of gaseous hydrocarbons and carbon dioxide in the Quaternary sediments at Starunia palaeontological site and vicinity (Carpathian region, Ukraine)
Autorzy:
Kotarba, M. J.
Sechman, H.
Dzieniewicz, M.
Powiązania:
https://bibliotekanauki.pl/articles/191503.pdf
Data publikacji:
2009
Wydawca:
Polskie Towarzystwo Geologiczne
Tematy:
near-surface geochemical survey
depth gas distribution
stable carbon isotopes
gaseous hydrocarbon origin
carbon dioxide origin
Quaternary sediments
woolly rhinoceros
Starunia palaeontological site
Ukrainian Carpathians
Opis:
Near-surface gases were investigated in Starunia, where remains of mammoth and woolly rhinoceroses were discovered at the beginning of the 20th century. Samples were collected at 30 measurement sites, from 0.8, 1.6, 2.4, 3.2 and 4.0 m depths and analysed for their molecular and isotopic compositions. Most of the methane and all higher gaseous hydrocarbons accumulated within the near-surface zone are of thermogenic origin. The distribution of thermogenic methane and higher gaseous hydrocarbons in Quaternary sediments is variable and, generally, increases with depth. Microbial methane or a mixture of microbial and thermogenic methane also occurs at the near-surface zone. The presence of hydrogen and alkenes in the near-surface gases also suggests a contribution from recent, microbial processes. Helium of crustal origin migrated through the Rinne Fault and other tectonic zones located in the study area, and was subsequently dispersed during migration through the lithologically diversified Pleistocene and Holocene sediments. The high variability of the carbon dioxide concentration and stable carbon isotope composition at various depths in the near-surface zone is caused by its polygenetic origin (thermogenic, microbial, and oxidation of hydrocarbons and Quaternary organic matter), and also by its dissolution in water and oil during migration through lithologically diversified Pleistocene and Holocene sediments. Zones of thermogenic methane occurrence within Pleistocene sediments, dominated by muds saturated with bitumen and brines, provide the most favourable environment for preservation of large extinct mammals. It is likely that during the Pleistocene winters, when thick ice and snow covered the tundra lake and swamp, zones of outflow of brines, oils, helium, and thermogenic gaseous hydrocarbons had a higher temperature, which could have resulted in melting and cracking of the ice cover and drowning of large mammals. The most favourable conditions for preservation of large, extinct mammals probably still exists in the vicinity of sampling probe sites Nos 21, 22, 23 and 36. Zones of dominance of microbial methane concentrations are less favourable sites for preservation of extinct mammals, because this methane was generated within recent swamps and also within recent descending meteoric waters which infiltrated into Pleistocene and Holocene sediments. Older Pleistocene microbial gases have already escaped to the atmosphere.
Źródło:
Annales Societatis Geologorum Poloniae; 2009, 79, No 3; 403-419
0208-9068
Pojawia się w:
Annales Societatis Geologorum Poloniae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Heksafluorek siarki w badaniach skuteczności wychwytu substancji chemicznych na stanowiskach pracy
Investigation of capture efficiency of chemical substances in workplaces using sulfur hexafluoride
Autorzy:
Jankowski, T.
Powiązania:
https://bibliotekanauki.pl/articles/2071559.pdf
Data publikacji:
2011
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
znacznik gazowy
sześciofluorek siarki
wyciąg laboratoryjny
wentylacja
rozkład prędkości powietrza
rozkład stężeń
tracer gas
hexafluoride
fume cupboard
ventilation
air velocity distribution
concentration distribution
Opis:
W pracy opracowano metodę badania współdziałania wentylacji nawiewno-wyciągowej z użyciem SF6 jako znacznika. Rozpatrzono wpływ charakterystyk przepływowych wewnątrz wyciągu i w jego otoczeniu na emisję zanieczyszczeń powietrza. Wyniki potwierdzają możliwość zastosowania zaproponowanej metodyki do wspomagania projektowania oraz sprawdzania skuteczności wyciągów.
The paper demonstrates the application of tracer gas method (SF6) for testing the cooperation of supply-exhaust ventilation system. An influence of flow characteristics inside the fume cupboards and its surroundings on the air pollutants emission was investigated. The results confirm the possibility of using the proposed method for design and evaluation of the efficiency of fume cupboards.
Źródło:
Inżynieria i Aparatura Chemiczna; 2011, 5; 46-47
0368-0827
Pojawia się w:
Inżynieria i Aparatura Chemiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
LNG szansą rozwoju rynku gazu ziemnego - możliwości działań przedsiębiorstw dystrybucyjnych
LNG - chance for development of gas market
Autorzy:
Wielgus, G.
Powiązania:
https://bibliotekanauki.pl/articles/299400.pdf
Data publikacji:
2011
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
dystrybucja gazu ziemnego
technologia LNG
efektywność przedsięwzięć rozwojowych
zwiększenie efektywności działalności inwestycyjnej
grupa docelowa rynku LNG
ciągłość dostaw paliwa gazowego
zwiększenie wykorzystania zasobów
prefazyfikacja
gas distribution
LNG technology
Opis:
Artykuł wskazuje możliwości wykorzystania technologii LNG w działaniach firm zajmujących się dystrybucją gazu ziemnego. Odnosząc się do kluczowych aspektów efektywności ekonomicznej związanych z budową i eksploatacja infrastruktury gazowej wskazane są także obecne główne ograniczenia rozwoju tego obszaru rynku. Związane są one z podażą paliwa gazowego w postaci skroplonej i niekorzystnymi wysokimi nakładami na budowę stacji regazyfikacji. W perspektywie kilkuletniej, po rozpoczęciu funkcjonowania terminalu LNG w Świnoujściu, należy spodziewać się eliminacji tych ograniczeń. Autor wskazuje w artykule także główne determinanty pozwalające ustalić grupę docelową potencjalnych klientów. Bazując na analizie sytuacji rynkowej, stworzenie systemu dystrybucji przy wykorzystaniu technologii LNG, pozwoli przedsiębiorstwom sektora dystrybucji gazu ziemnego nie tylko na zwiększenie przychodów. Inne istotne korzyści związane będą z: zwiększeniem efektywności majątku sieciowego, poprawą wykorzystania zasobów przedsiębiorstw, usprawnieniem działalności inwestycyjnej i eksploatacyjnej oraz z zapewnieniem ciągłości dostaw paliwa gazowego. Rezerwy urządzeń kriogenicznych można wykorzystywać dla zapewnienia niezawodności dostaw w przypadkach awarii i remontów infrastruktury sieciowej.
The paper presents opportunities of LNG technology usage in gas distribution companies. Key aspects of construction and use of gas infrastructure and development's limitations are described. The author shows ways for determination of potential buyers' target groups.
Źródło:
Wiertnictwo, Nafta, Gaz; 2011, 28, 1-2; 453-457
1507-0042
Pojawia się w:
Wiertnictwo, Nafta, Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Warunki przepływu spalin w kominie a kwasowy punkt rosy
Flow conditions in the chimney and acid dew point
Autorzy:
Gawron, M.
Przybyła, K.
Lipnicki, Z.
Powiązania:
https://bibliotekanauki.pl/articles/371914.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
przepływ spalin
rozkład temperatury
kwasowy punkt rosy
exhaust gas flow
temperature distribution
acid dew point
Opis:
W artykule przedstawiono termodynamiczny model przepływu spalin przez komin. Na podstawie bilansu ciepła przepływających spalin przedstawiono rozkład temperatury spalin wzdłuż wysokości komina. Podano warunki przepływu spalin, przy których występuje kwasowy punkt rosy.
The article presents methods for the simulation of static low-pressure gas network is characterized by rapid changes in pressure and velocity. Presented nonlinear algebraic mathematical models for calculating the relationship between pressure drop, the gas flow stream, geometric dimensions of pipes and pipeline gas properties.
Źródło:
Zeszyty Naukowe. Inżynieria Środowiska / Uniwersytet Zielonogórski; 2011, 144 (24); 48-59
1895-7323
Pojawia się w:
Zeszyty Naukowe. Inżynieria Środowiska / Uniwersytet Zielonogórski
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An analysis of variability in demand for natural gas at rural households
Analiza zmiennosci zapotrzebowania wiejskich gospodarstw na gaz ziemny
Autorzy:
Trojanowska, M.
Lipczynska, D.
Powiązania:
https://bibliotekanauki.pl/articles/792576.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
natural gas
gas consumption
distribution
rural household
variability analysis
statistical analysis
cluster analysis
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2014, 14, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
CFD prediction of gas-liquid flow in an aerated stirred vessel using the population balance model
Autorzy:
Kálal, Z.
Jahoda, M.
Fořt, I.
Powiązania:
https://bibliotekanauki.pl/articles/185765.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
CFD
mixing tank
gas-liquid
drag correction
bubble size distribution
zbiornik mieszający
gaz-ciecz
korekta przeciągania
rozkład wielkości pęcherzyków
Opis:
The main topic of this study is the experimental measurement and mathematical modelling of global gas hold-up and bubble size distribution in an aerated stirred vessel using the population balance method. The air-water system consisted of a mixing tank of diameter T= 0.29 m, which was equipped with a six-bladed Rushton turbine. Calculations were performed with CFD software CFX 14.5. Turbulent quantities were predicted using the standard k-ε turbulence model. Coalescence and breakup of bubbles were modelled using the homogeneous MUSIG method with 24 bubble size groups. To achieve a better prediction of the turbulent quantities, simulations were performed with much finer meshes than those that have been adopted so far for bubble size distribution modelling. Several different drag coefficient correlations were implemented in the solver, and their influence on the results was studied. Turbulent drag correction to reduce the bubble slip velocity proved to be essential to achieve agreement of the simulated gas distribution with experiments. To model the disintegration of bubbles, the widely adopted breakup model by Luo & Svendsen was used. However, its applicability was questioned.
Źródło:
Chemical and Process Engineering; 2014, 35, 1; 55-73
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technical and economic comparison of gas-supply systems in residential areas
Techniczne i ekonomiczne porównanie systemów przemysłu gazowego na obszarach mieszkalnych
Autorzy:
Predun, K. M.
Rybachov, S. H.
Ahonina, A. V.
Powiązania:
https://bibliotekanauki.pl/articles/2068328.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
tereny mieszkaniowe
gazociąg
dystrybucja gazu
system gazowniczy
koszt
residential areas
gas pipeline
gas distribution
gas supply system
cost
Opis:
The results of studies of gas-distribution systems in rural residential areas are outlined. Construction costs of street gas pipelines and gas-control units are taken as comparing criteria. The economically viable option is substantiated.
W artykule przedstawiono wyniki badań systemów dystrybucji gazu w wiejskich obszarach mieszkalnych. Jako kryteria porównawcze przyjęto koszty budowy ulicznych gazociągów i bloków kontrolnych. Opcja ta jest uzasadniona z ekonomicznego punktu widzenia.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2014, 20 (170); 219--222
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mining waste dumps – modern monitoring of thermal and gas activities
Zwałowiska odpadów wydobywczych – nowoczesne metody monitoringu termiczno-gazowego
Autorzy:
Wasilewski, S.
Skotniczny, P.
Powiązania:
https://bibliotekanauki.pl/articles/216043.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
mining waste dump
remote measurement
temperature distribution
thermographic image
aircraft
fire detection
thermal activity
gas activity
zwałowisko odpadów wydobywczych
zdalny pomiar
rozkład temperatur
termografia
pokład samolotu
pożar zwałowiska
monitoring termiczno gazowy
Opis:
Mining waste dumps are permanently incorporated in the landscape of the mining areas and exert an impact on the environment in many ways. The presence in the massif of a dump of carbonaceous substances often leads to the formation of fire hazards.Monitoring the activity of a newly created coal waste dump or of one under fire plays an extremely important role in fire prevention activity. Under the current regulations it must be carried out both during the exploitation process and for many years after wards. Monitoring a dump is targeted, among others, at detecting thermal and gas anomalies already at the initial stage of development and to undertake preventive measures to eliminate and minimize the impact and load of a dump for the environment and the health and life of humans. In the article selected results of a research project (Raport 2011) are shown; a method of monitoring fire hazards at dump wastes was proposed, which includes thermal scanning and thermal-gas monitoring by a borehole method aimed at fixed points in the dump. Monitoring the large area of a dump requires exploration of the thermal state of a significant area hence the accepted scanning of the area is with a precision thermal imaging camera during an air raid. Then at selected sites of the dump, long-term in-field studies were conducted using the wireless data collection system from scattered test holes, made of perforated pipes and equipped with temperature and gas probes (CO, CO2, O 2). At the same time the changes of environmental conditions and changes in atmospheric state parameters were observed around the dump, the so-called wind rose, based on data recorded by the weather station.
Zwałowiska odpadów wydobywczych wpisują się na trwałe w krajobraz terenów górniczych i oddziaływają na środowisko naturalne w wielu aspektach. Obecność w masywie zwałowiska substancji węglowych prowadzi często do powstawania zagrożeń pożarowych. Niezwykle ważną rolę w profilaktyce przeciwpożarowej odgrywa monitoring aktywności zwałowiska odpadów węglowych nowo powstałych i zapożarowanych. Zgodnie z obowiązującymi przepisami musi on być prowadzony zarówno w czasie eksploatacji jak i przez wiele lat po jej zakończeniu. Monitoring zwałowiska ma na celu m.in. wykrycie anomalii termicznych i gazowych już w początkowym stadium rozwoju i podjęcie działań profilaktycznych w celu usunięcia i minimalizacji wpływu oraz obciążenia zwałowiska dla środowiska oraz zdrowia i życia ludzi. W artykule przedstawiającym wybrane wyniki projektu badawczego (Raport 2011) zaproponowano metodę monitoringu zagrożeń pożarowych zwałowiska odpadów powęglowych, która obejmuje skaning termiczny oraz monitoring termiczno-gazowy metodą otworową w ustalonych punktach zwałowiska. Monitoring rozległego zwałowiska wymaga rozpoznania stanu termicznego znacznego obszaru, stąd przyjęto skanowanie terenu za pomocą precyzyjnej kamery termowizyjnej w czasie przelotu lotniczego. Następnie w wyznaczonych miejscach zwałowiska prowadzono długookresowe badania poligonowe z wykorzystaniem bezprzewodowego systemu zbierania danych z rozproszonych otworów badawczych, wykonanych z rur perforowanych i wyposażonych w sondy z czujnikami temperatury i gazów (CO, CO2, O2). Równocześnie obserwowano zmienne warunki otoczenia i zmiany parametrów stanu atmosfery, tzw. róży wiatrów, wokół zwałowiska na podstawie danych zarejestrowanych przez stację pogodową.
Źródło:
Gospodarka Surowcami Mineralnymi; 2015, 31, 1; 155-181
0860-0953
Pojawia się w:
Gospodarka Surowcami Mineralnymi
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the mechanism of gas bubble break-up in liquids during the self-aspirating impeller operation
Autorzy:
Stelmach, J.
Kuncewicz, Cz.
Musoski, R.
Powiązania:
https://bibliotekanauki.pl/articles/185320.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
self-aspirating impeller
PIV
gas bubble size distribution
energy dissipation rate
gas bubble sizes
pęcherzyk gazu
rozpraszanie energii
Opis:
Feasibility of a model of gas bubble break-up and coalescence in an air-lift column enabling determination of bubble size distributions in a mixer with a self-aspirating impeller has been attempted in this paper. According to velocity measurements made by the PIV method with a self-aspirating impeller and Smagorinski’s model, the spatial distribution of turbulent energy dissipation rate close to the impeller was determined. This allowed to positively verify the dependence of gas bubble velocity used in the model, in relation to turbulent energy dissipation rate. Furthermore, the range of the eddy sizes capable of breaking up the gas bubbles was determined. The verified model was found to be greatly useful, but because of the simplifying assumptions some discrepancies of experimental and model results were observed.
Źródło:
Chemical and Process Engineering; 2016, 37, 3; 441-457
0208-6425
2300-1925
Pojawia się w:
Chemical and Process Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reducing wear of piston rings using zero flow nitriding
Autorzy:
Kowalska, J.
Wróblewski, E.
Powiązania:
https://bibliotekanauki.pl/articles/243715.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
piston rings
controlled gas nitriding
nitrided layer
diffusion zone
hardness distribution
Opis:
This article presents new method of controlled gas nitriding called ZeroFlow, which is used for nitriding of internal combustion engine parts. Increasing efficiency of internal combustion engines means that engines are working under high thermal and mechanical loads, which is the unfavourable phenomenon – especially for elements of engine power train such as crankshaft or piston rings. Due to the high temperature and pressure in cylinder during combustion, piston rings are working under limit loads, which mean that lengthened fatigue life and wear resistant are of critical importance. Heat treatment is the most common way used for improving tribological properties of piston rings; one of the methods of heat treatment using in automotive industry, which meets with growing interest, is nitriding, especially controlled gas nitriding. The main aim of nitriding is to obtain layer with higher surface hardness, improved fatigue life and corrosion resistance, increased wear resistant and antigallic properties. According to that, this layer increase durability of nitrided parts, and as a result – durability of machines and vehicles. Steel nitriding using the ZeroFlow method allows precise forming of nitrided layers with respect to the phase structure, zone thicknesses and hardness distribution, which means that the ZeroFlow nitriding enable maintenance of full control over the kinetics of the nitrided layer growth. Kinetics of nitrided layer growth allows developing the especially dedicated process with specific parameters, which ensure obtaining on piston rings nitrided layer with strictly defined, required properties.
Źródło:
Journal of KONES; 2016, 23, 2; 193-199
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Temperature Distribution Measurements in the Gyál MSW Landfil
Pomiary rozkładu temperatury na składowisku odpadów Gyál (Węgry)
Autorzy:
Magyar, T.
Faitli, J.
Powiązania:
https://bibliotekanauki.pl/articles/318943.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Przeróbki Kopalin
Tematy:
stałe odpady komunalne
rozkład temperatury
wytwarzanie ciepła rozkładu
odciek
gaz wysypiskowy
municipal solid waste
temperature distribution
decomposition heat generation
leachate
landfill gas
Opis:
Mixed municipal solid waste (MSW) landfills can serve as energy sources, because the temperature inside of them is high for a long time period. There are many mechanical, chemical and biological processes taking place simultaneously. Probably, there are aerobic and anaerobic biological decomposition taking place simultaneously because the average temperature can be higher than 40ºC for decades. The inside operation of the heterogeneous MSW landfills is a really complex phenomenon. For the better knowledge about the operation of MSW landfills as bioreactors more measured data is necessary. For this reason a temperature, leachate and landfill gas monitoring system was installed into the Gyál (Hungary) MSW landfill. One hundred temperature sensors were installed into ten 16 m depth monitoring wells. Since two years temperature data has been red weekly. This data base is now available for analysis. The temperature monitoring wells were drilled into four different landfill sections. The deposition time of the waste is different in the different landfill sections. Exponential temperature increase can be observed at the young waste section and almost constant or decreasing temperature tendency at the older ones. Characterising temperature – time functions were determined by simple curve fitting. The vertical temperature distribution in the monitoring wells was also analysed.
Zmieszane stałe odpady komunalne (MSW) zdeponowane na składowisku mogą służyć jako źródło energii, ponieważ temperatura wewnątrz składowisku utrzymuje się przez dłuższy czas na wysokim poziomie. W składowisku zachodzi jednozcesnie wiele procesów mechanicznych, chemicznych i biologicznych. Procesy rokładu biologicznego tlenowe i beztlenowe mogą zachodzić równocześnie gdyż średnia temperatura może być wyższa niż 40°C przez dziesiątki lat. Zjawiska zachodzace wewnątrz skladowisk odpadów zmieszanych są bardzo złożone. W artykule przedstawiono wyniki badań nad funkcjonowaniem składowiska odpadów komunalnych Gyál (Węgry). Zainstoalowano system monitoringu temperatury, odcieków i gazu wysypiskowego. Sto czujników temperatury zainstalowano w dziesięciu studiach o głębokości 16 m rozlokowanych w czterech sekacjach składowiska. Monitoring prowadzono w ciągu dwóch lat zbierając dane raz na tydzień. Uzyskana baza danych została poddana analizie. Czas składowania jest różnych dla różnych sekcji składowiska. Obserwuje się gwałtowny wzrost temperatury na początku składowania, przedstawiono krzywe zmiany temperatury w czasie a także zmiany temperatury z głębkokością studzienek.
Źródło:
Inżynieria Mineralna; 2016, R. 17, nr 2, 2; 183-190
1640-4920
Pojawia się w:
Inżynieria Mineralna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selecting Parameters for Bending of Tubes Made of the X70 Steel by Numerical Modelling
Autorzy:
Junak, G.
Cieśla, M.
Tomczak, J.
Powiązania:
https://bibliotekanauki.pl/articles/356269.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
tube bending
numerical modelling
X70 steel
gas distribution pipelines
Opis:
This paper addresses numerical analyses of the bending process for tubes made of the X70 steel used in gas distribution pipe-lines. The calculations performed under the research involved simulation of processes of tube bending with local induction heating. The purpose of these calculations was to establish process parameters making it possible to develop pipe bends of geometric features conforming with requirements of the applicable standards. While performing the calculations, an analysis was conducted to determine the probability of occurrence of folding and fractures according to the Cockcroft-Latham criterion.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 2339-2342
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
3D Model Study of Radial Distribution of Powder Holdup in the Descending Packed Bed of Metallurgical Shaft Furnaces
Autorzy:
Panic, B.
Powiązania:
https://bibliotekanauki.pl/articles/353435.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
blast furnace
system descending packed bed–gas-powder
radial distribution of powder
Opis:
The principle of work of many metallurgical shaft furnaces is based on the flow of reaction gas through the descending packed bed composed of metallurgical materials. Hot gases flow up the shaft furnace through the column of materials, give their heat to the descending charge materials. At the same time due to their reducing nature they interact chemically, causing the reduction of oxides inside the charge. In real conditions, during the course of the process, the powder is generated, the source of which is the batch materials or it is introduced into the as part of the process procedure. The powder in the form of thin slurry is carried by the stream of flowing gas. Such multiphase flow might considerably affect the permeability of the charge due to the local holdup of powder. The holdup of solid phase in packed beds of metallurgical shaft furnaces leads to radial changes in bed porosity. Radial changes in bed porosity uneven gas flow along the radius of the reactor and negatively affect the course and efficiency of the process. The article describes the model studies on radial distribution of carbon powder holdup in the packed bed composed of metallurgical materials. The powder was divided into fractions – "static" and "dynamic". Large diversity of carbon powder distribution was observed in the function of the radius of reactor in relation to the bed type, apparent velocity of gas carrying powder and the level of bed height.
Źródło:
Archives of Metallurgy and Materials; 2018, 63, 2; 999-1002
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies