Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "fuel production" wg kryterium: Temat


Tytuł:
Methane hydrate technologies in Ukraine: research and prospects
Autorzy:
Zhuk, H.
Pyatnichko, O.
Krushnevich, V.
Fedorenko, D.
Klymenko, V.
Powiązania:
https://bibliotekanauki.pl/articles/298701.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
methane hydrate
transport of natural gas
methane production
alternative fuel sources
carbon dioxide capture and storage
hydrate test stand
Ukraine
Opis:
Abstract Methane production from natural gas hydrates will enable the reduction of a great part of natural gas import deliveries and to give up them completely in the future. Gas hydrate technologies compared with existing ones, also gives the possibility to transport gas, divide gas and liquid mixtures, concentrate water solutions, utilize and store СО2, etc. with greater efficiency. However, methane production technologies have not developed industrially and their study was performed with the help of experimental units and in separate gas hydrates deposits in the mode of tests and elaborations. The prospects of the hydrate technologies development in the Ukraine were determined: transportation of natural gas in the form of hydrates, long-term storage of natural gas in hydrate state, natural gas production from its hydrate deposits. Positive international experience in terms of the development of hydrate technology is studied. In order to study formation and dissociation hydrates of carbon dioxide and natural gas components, Gas Institute have made hydrate stand facility. The express method of determining thermodynamic and kinetic parameters of hydrate transformation was tested. Natural gas hydrates as well as carbon dioxide hydrates were produced with the help of the express method. It was determined that the composition of original natural gas and gas of hydrates decomposition is of great difference – it means that “selective” hydrates formation of natural gas formation is performed.A set of experiments was also performed to study the process of methane replacement with the help of carbon dioxide. According to the gaseous phase analysis, 14% increase of methane content was fixed. This fact proves its replacement in hydrates with the help of carbon dioxide.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 4; 811-818
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problem wpływu wanadu i arsenu na proces klinkieryzacji oraz właściwości cementów
The problem of impact vanadium and arsenic in clinkering process and cement properties
Autorzy:
Zapolski, P.
Powiązania:
https://bibliotekanauki.pl/articles/392408.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
produkcja cementu
wypał klinkieru
paliwo alternatywne
metal ciężki
wanad
arsen
właściwości cementu
cement production
clinker burning
alternative fuel
heavy metal
vanadium
arsenic
cement properties
Opis:
Stosowanie paliw alternatywnych wytwarzanych z odpadów powoduje wprowadzanie do pieca obrotowego m.in. metali ciężkich, co może spowodować otrzymanie klinkieru o właściwościach, które mogą mieć wpływ na niespełnienie przez cement oczekiwanych wymagań jakościowych. Celem badań było określenie zmian, jakie mogły nastąpić w procesie klinkieryzacji i przeniesienia tych nowych właściwości na cement. Badania zrealizowano w dwóch etapach: badania zawartości wolnego wapna, XRD z metodą Ritvelda, na mikroskopie optycznym, SEM oraz w drugim etapie badania normowe cementów. Próbki do badań otrzymano z mąki piecowej z jednej polskiej cementowni bez dodatków oraz z dodatkiem 1% tlenku wanadu i dodatkiem 1% tlenku arsenu.
The use of alternative fuels produced from waste results in the introduction of the rotary kiln, among others, heavy metals which may produce clinker with properties which might affect the cement did not fulfill the quality requirements expected. The aim of the study was performed to determine the changes that may occur in the process of clinkering and transfer these new properties on the cement. The study was performed in two stages: the study of free lime, Ritvelda XRD method for optical microscope, SEM, and in the second stage of the standard tests of cement. The test specimens were obtained from furnace flour from one Polish cement plant without additives and with the addition of 1% vanadium oxide and 1% arsenic oxide.
Źródło:
Prace Instytutu Ceramiki i Materiałów Budowlanych; 2016, R. 9, nr 25, 25; 63-74
1899-3230
Pojawia się w:
Prace Instytutu Ceramiki i Materiałów Budowlanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena potencjału produkcji i termicznej destrukcji paliw z odpadów w warunkach Śląska
Assessment the potential of production and thermal destruction of fuels from waste in Silesia
Autorzy:
Wojtacha-Rychter, K.
Białecka, B.
Powiązania:
https://bibliotekanauki.pl/articles/112775.pdf
Data publikacji:
2014
Wydawca:
STE GROUP
Tematy:
odpady komunalne
produkcja energii
analiza korelacji
paliwo z odpadów
akty prawne
municipal wastes
energy production
correlation analysis
fuel from waste
regulations
Opis:
Celem artykułu było określenie potencjału ilościowego i energetyczny odpadów komunalnych w województwie śląskim do produkcji paliw dla elektrowni i elektrociepłowni zawodowych. Szczególną uwagę zwrócono na aspekty finansowe, prawne i technologiczne zarówno systemu gospodarki odpadami w Polsce oraz rozwój technologii spalania odpadów w procesie produkcji energii elektrycznej i ciepła. Przeprowadzona analiza korelacji wykazała silną dodatnią zależność między ilością wytwarzanych odpadów a procesem urbanizacji.
The purpose of the article was to assess the quantity and energy potential of municipal solid waste in the province of Silesia for production of fuels for power plant. Special attention was paid to the financial, legal and technological aspects of both the waste management system in Poland and the development of technology of waste incineration in processes of electricity and heat production. The analysis of correlation showed a strong positive correlation between the amount of waste generated and the process of urbanization.
Źródło:
Systemy Wspomagania w Inżynierii Produkcji; 2014, 3 (9); 237-248
2391-9361
Pojawia się w:
Systemy Wspomagania w Inżynierii Produkcji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elektroutlenianie odpadowego syntetycznego oleju silnikowego w wodnym roztworze H2SO4
Electrooxidation of used synthetic engine oil in aqueous solution of H2SO4
Autorzy:
Włodarczyk, P. P.
Włodarczyk, B.
Powiązania:
https://bibliotekanauki.pl/articles/401421.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
elektroutlenianie
odpadowy olej silnikowy
wytwarzanie energii elektrycznej
paliwo
ogniwa paliwowe
odnawialne źródła energii
inżynieria środowiska
electrooxidation
used synthetic engine oil
electricity production
fuel
fuel cell
renewable energy sources
environmental engineering
Opis:
W pracy przedstawiono badania nad możliwością wykorzystania odpadowego syntetycznego oleju silnikowego do bezpośredniego wytwarzania energii elektrycznej. Pomiary przeprowadzono w zakresie temperatur 293–333 K. Obejmowały one elektroutlenianie emulsji odpadowego (zużytego) syntetycznego oleju silnikowego na elektrodzie platynowej w wodnym roztworze H2SO4. Do wytworzenia emulsji wykorzystano niejonowy środek powierzchniowo czynny Syntanol DS-10. Maksymalna uzyskana gęstość prądu wyniosła 22 mA/cm2 (dla temp. 333 K). Wykazano więc, że istnieje możliwość bezpośredniego wytwarzania prądu elektrycznego z odpadowego syntetycznego oleju silnikowego, a więc zasilania nim ogniw paliwowych.
The paper presents possibility of using used synthetic engine oil to direct electricity production. The measurements conducted in the temperature range 293–333 K. Were measured electrooxidation of used synthetic engine oil emulsion on a smooth platinum electrode in an aqueous solution of H2SO4. The emulsion prepared on the basis of a nonionic surfactant Syntanol DS-10. The maximum current density reached the level of 22 mA/cm2 (temp. 333 K). Measurements shows possibility of direct electricity production from used synthetic engine oil emulsion, so powering fuel cell of this oil.
Źródło:
Inżynieria Ekologiczna; 2017, 18, 1; 65-70
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ogniwo paliwowe zasilane emulsją oleju rzepakowego
Fuel cell powered with canola oil emulsion
Autorzy:
Włodarczyk, P. P.
Włodarczyk, B.
Powiązania:
https://bibliotekanauki.pl/articles/399713.pdf
Data publikacji:
2017
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
ogniwa paliwowe
elektroutlenianie
olej rzepakowy
wytwarzanie energii elektrycznej
odnawialne źródła energii
inżynieria środowiska
fuel cell
electrooxidation
canola oil
electricity production
renewable energy sources
environmental engineering
Opis:
W pracy przedstawiono badania nad możliwością wykorzystania oleju rzepakowego jako substancji czynnej do zasilania ogniwa paliwowego. W tym celu zbudowano testowe ogniwo paliwowe. Ogniwo zasilano emulsją oleju rzepakowego. Jako detergent zastosowano Syntanol DS-10. Wykorzystano anodę z katalizatorem platynowym oraz katodę z katalizatorem Ni-Co. Pomiary przeprowadzono w temperaturze 293–333K. Maksymalna uzyskana gęstość prądu wynosiła 2 mA/cm2, natomiast maksymalna moc ogniwa 21 mW (dla temp. 333K). Wykazano, więc możliwość bezpośredniego dostarczania oleju rzepakowego (w formie emulsji) na anodę. Uzyskana moc ogniwa była stosunkowo niska, jednak istnieje możliwość zbudowania ogniwa paliwowego zasilanego olejem rzepakowym.
The paper presents possibility of using canola oil as an active substance to fuel cell powering. A prototype fuel cell was built for this purpose. The cell was powered with canola oil emulsion. Syntanol DS-10 was utilized as a detergent. The mesh electrode with Pt catalyst served as an anode, whereas the mesh electrode with Ni-Co catalyst was used as a cathode. The measurements were conducted in the temperature range of 293–333K. The maximum current density reached the level of 2 mA/cm2, while the maximum power reached the level of 21 mW (at temp. 333K). Therefore, it was shown that canola oil (in emulsion form) the can be delivery directly to the anode. Although the obtained power is low, it is possible to build a fuel cell powered with canola oil.
Źródło:
Inżynieria Ekologiczna; 2017, 18, 4; 155-160
2081-139X
2392-0629
Pojawia się w:
Inżynieria Ekologiczna
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of the impact of the type of camelina oil used for production of biofuels on the fractional composition of CSME
Określenie wpływu rodzaju użytego oleju rzepakowego do produkcji biopaliw na skład frakcyjny CSME
Autorzy:
Wcislo, G.
Pracuch, B.
Powiązania:
https://bibliotekanauki.pl/articles/792893.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
biodiesel production
biodiesel fuel
biofuel
gold of pleasure oil
diesel engine
fractional composition
distillation
temperature
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2014, 14, 4
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of biodiesel fuel and bioethanol production and consumption in Latvia
Stosowanie biopaliwa oraz produkcja i konsumpcja bioetanolu w Łotwie
Autorzy:
Viesturs, D.
Melece, L.
Kopiks, N.
Powiązania:
https://bibliotekanauki.pl/articles/337637.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
biodiesel fuel
bioethanol
production
consumption
Latvia
Opis:
The article provides an analysis of the biofuel production and consumption development in Latvia. The biofuel production developed due to the state subsidies which were paid for the produced amount till the year 2010. The present capacities can ensure fulfilment of the norms set by the EU Directive for the consumption of biofuel; there is a competitive production unit with a modern technology and a great production output. However, in the field of consumption, the state considerably lags behind the norms mentioned. Therefore measures should be continued to promote biofuel consumption.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2014, 59, 4; 111-113
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibility of the steam production increase in the selected smoke tube exhaust gas boiler under the low load of the electronically controlled low speed marine prime mover
Autorzy:
Tuński, T.
Powiązania:
https://bibliotekanauki.pl/articles/359604.pdf
Data publikacji:
2014
Wydawca:
Akademia Morska w Szczecinie. Wydawnictwo AMSz
Tematy:
fuel common rail
steam production
low load
ambient conditions
Opis:
Modern marine Diesel prime movers are equipped with so called ‘common rail’ as a part installed in the fuel injection system. This kind of design, gives a possibility to control fuel injection process in ways which were not available to carry out on conventionally designed engines. During the ship operation with a reduced speed and reduced load of the main engine, especially under the “Super Slow Steaming” conditions the waste heat recovery process in exhaust gas boiler is being disturbed. In the article, there is presented a possibility to increase the steam production of the waste heat boiler by interference in the fuel injection pattern for the engine. For the selected system “low speed main engine – smoke tube exhaust gas boiler” the test session has been carried out under the real ambient and operational condition of the ship to verify described possibility. Obtained results have been presented.
Źródło:
Zeszyty Naukowe Akademii Morskiej w Szczecinie; 2014, 38 (110); 96-100
1733-8670
2392-0378
Pojawia się w:
Zeszyty Naukowe Akademii Morskiej w Szczecinie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geoinformation technology for spatial inventory of greenhouse gas emissions: electricity and heat generation in Poland
Autorzy:
Topylko, P.
Lesiv, R.
Bun, R.
Zahorski, Z.
Horabik, J.
Powiązania:
https://bibliotekanauki.pl/articles/411189.pdf
Data publikacji:
2013
Wydawca:
Polska Akademia Nauk. Oddział w Lublinie PAN
Tematy:
modeling
geoinformation technology
greenhouse gas emissions
electricity production
combined heat and power production
fossil fuel
Opis:
One of the main features of energy production in Poland is high dependence on consumption of coal and lignite, which results in significant emissions of greenhouse gases (GHGs) to the atmosphere. This article presents the geo- information technology and spatial analysis of GHG emissions from fossil fuel burned by power and combined power and heat plants. These plants are considered as emission sources of a point type. As input data, official regional statistics about consumption of fossil fuel for electricity and heat production are used. In addition, main characteristics of power and power/ heat plants are collected from official web-sites. Based on the developed model, numerical experiments have been carried out for the territory of Poland. The results of spatial modeling are presented in the form of thematic maps.
Źródło:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes; 2013, 2, 2; 51-58
2084-5715
Pojawia się w:
ECONTECHMOD : An International Quarterly Journal on Economics of Technology and Modelling Processes
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Production of fuel wood chips as an example of supply chain reorganisation resulting from socioeconomic changes in Poland
Autorzy:
Szewczyk, Katarzyna
Polowy, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/342744.pdf
Data publikacji:
2020
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Technologii Drewna
Tematy:
supply chain
fuel wood chips
production
costs
Opis:
An analysis was made of the production of fuel wood chips and associated logistics operations in the Wejherowo Forest District in the years 2000-2017. Detailed observations of the fuel chip harvesting process and an analysis of the supply chain were made in the context of socioeconomic changes. In addition, the total cost of production was calculated and the price of 1 m3 of fuel chips in the years 2009-2017 was analysed. As a result of socioeconomic changes, seven variants of the forest fuel chip supply chain were observed in the years analysed. The unit production cost of forest fuel chips was 25 USD per m3. The average price of 1 m3 of forest fuel chips in the analysed period was 30 USD.
Źródło:
Drewno. Prace Naukowe. Doniesienia. Komunikaty; 2020, 62, 205; 141-154
1644-3985
Pojawia się w:
Drewno. Prace Naukowe. Doniesienia. Komunikaty
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Optimization and performance evaluation of microbial fuel cell by varying agar concentration using different salts in salt bridge medium
Autorzy:
Singh, K.
Dharmendra, -
Powiązania:
https://bibliotekanauki.pl/articles/1818503.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
agar
energy production
microbial fuel cell
salt bridge
wastewater
produkcja energii
mikrobiologiczne ogniwo paliwowe
most solny
ścieki
Opis:
Purpose: Comparative study of various agar-agar (C14H24O9) percentage and different salts concentration in the salt bridge is carried out to check the efficiency of microbial fuel cell. Design/methodology/approach: Dual chambered microbial fuel cell was used for the overall experiments. Anode and cathode chambers were made of 500 ml plastic jar. Salt bridge was fabricated with agar-agar technical and 3 M NaCl in a PVC pipe of 2 cm long. Chemical Oxygen Demand, pH and electrical conductivity of wastewater were examined. Oxygen was supplied in the cathode chamber using the aquarium pump. Voltage (open circuit voltage) was observed using digital multimeter. Graphite rods were used as anode and cathode electrodes. Findings: Salt bridge was constructed of 3 M NaCl with 5, 7.5, 10 and 12 percent variation of agar amounts in MFC. The maximum outputs were observed 301, 306, 325 and 337.25 mV with the variation of agar 5, 7.5, 10 and 12 percentages respectively as well as chemical oxygen demand (COD) removal efficiency was observed 47.92, 56.25, 52.08 and 64.58 percentages respectively. The optimum agar concentration was found to be 12 percent and a maximum voltage of 337.25 mV and COD removal of 64.58 percent was achieved. After the optimization of agar percentage two salts i.e., Sodium chloride and potassium chloride were analysed. This study also reveals that the NaCl salt bridge is more efficient than KCl salt bridge for the same agar concentration. The maximum voltage for NaCl and KCl were 319 and 312 mV respectively. Research limitations/implications: The amount of electricity production is low and field scale implementation is difficult using microbial fuel cell. The research is still on progress in this field. Originality/value: here is very little research with salt bridge and MFC. Comparative study of different mole of salt is available but agar variation is not yet studied.
Źródło:
Archives of Materials Science and Engineering; 2020, 101, 2; 79--84
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza technicznych i technologicznych parametrów produkcji rzepaku ozimego
Analysis of technical and technological parameters of winter rape production
Autorzy:
Šařec, O.
Šařec, P.
Dobek, T.
Powiązania:
https://bibliotekanauki.pl/articles/286625.pdf
Data publikacji:
2006
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
efektywność ekonomiczna
koszty produkcji
nakłady pracy
rzepak ozimy
technologia tradycyjna
technologia uproszczona
zużycie paliwa
economical effectiveness
production costs
work expenses
winter rape
traditional technology
simplified technology
fuel consumption
Opis:
Celem badań było określenie, które ze stosowanych technologii, z uwzględnieniem regionu produkcji, są technicznie i ekonomicznie najbardziej przydatne. Badania prowadzone były w latach 2001 - 2004. Obejmowały one liczbę roślin które przezimowały, uzyskane plony, zużycie paliwa, nakłady pracy, koszty produkcji (materiałów, surowców i eksploatacji maszyn). Do oceny technologii przyjęto dwie grupy z podziałem na podgrupy. Pierwsza grupa to technologie z tradycyjnym przygotowaniem roli oraz z nawożeniem obornikiem i bez nawożenia obornikiem, druga grupa to technologie z płytkim przygotowaniem roli do siewu czyli technologia uproszczona bez nawożenia obornika i z obornikiem oraz uproszczona z nawożeniem pod redlicę wykonanym przy siewie. Z przeprowadzonych badań wynika, że różnice w kosztach, nakładach pracy i plonowaniu przy produkcji rzepaku ozimego w badanych technologiach tradycyjnych i uproszczonych nie były istotne.
The objective of the research was to establish, which of the applied technologies, taking into consideration the production region, are the best suited both technically and economically. The research was done in the years 2001-2004. It covered a number of plants that had overwintered, the obtained yield, fuel consumption, manpower expense, production costs (materials, raw materials and machinery operation). To assess the technology two groups were created, split into sub-groups. The first group included technologies with traditional preparation of the ploughland, with and without manure fertilization, the second group were the technologies with shallow preparation of the ploughland for the sowing, that is, simplified technology with and without manure fertilization, as well as simplified technology with fertilization under the coulter done during the seeding. The research has shown that the differences in costs, work expense and yield regarding winter rape production in the examined traditional and simplified technologies were not significant.
Źródło:
Inżynieria Rolnicza; 2006, R. 10, nr 4(79), 4(79); 263-271
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energia a rolnictwo (kryzys energetyczny - efektywność - rolnictwo)
Energy and agriculture (energy crisis - effectivity - agriculture)
Autorzy:
Roszkowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/291274.pdf
Data publikacji:
2008
Wydawca:
Polskie Towarzystwo Inżynierii Rolniczej
Tematy:
kryzys energetyczny
produkcja rolnicza
biomasa
paliwo
energia cieplna
energia elektryczna
wskaźniki efektywności
EroEI
NEV
FES
energy crisis
agricultural production
biomass
fuel
heat energy
electric energy
coefficients effectivity
Opis:
Kryzys energetyczny. Wskaźniki efektywności energetycznej ERoEI, efektywności netto NEV, efektywności zastępowania FES. Czynniki ograniczające i uwarunkowania wykorzystania biomasy rolniczej jako źródła energii - efektywność, ekologia, powierzchnie uprawy. Prognozy ilościowe w krajach UE 27 i RP. Energetyczne perspektywy biomasy, węgla, wodoru i energii jądrowej.
The energy crisis. Coefficients {indicators} of the energy-effectivity of ERoEI, effectivities net of NEV, the effectivity of the supersession FES. Factors restrictive and conditionings of the utilization of the agricultural biomass as sources of energy - the effectivity, the ecology, surfaces {areas} of the tillage. Quantitative prognoses in countries EU 27 and Republic of Poland. Energy-perspectives of the biomass, the coal, the hydrogen and the nuclear energy.
Źródło:
Inżynieria Rolnicza; 2008, R. 12, nr 4(102), 4(102); 25-35
1429-7264
Pojawia się w:
Inżynieria Rolnicza
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Odchodzenie wsi od rolnictwa a inżynieria rolnicza
Process of departing from the agriculture on rural areas and the role of agricultural engineering
Autorzy:
Roszkowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/238761.pdf
Data publikacji:
2009
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
produkcja rolnicza
obszar wiejski
funkcja pozarolnicza
surowce energetyczne
rolnictwo ekologiczne
efektywność energetyczna
technika rolna
inżynieria rolnicza
rural area
agricultural production
non-agricultural function
fuel
organic farming
energy effectiveness
agrarian technology
agricultural engineering
Opis:
Przedstawiono przemiany na wsi, w rolnictwie i produkcji rolnej, intensywność i ekstensywność wytwarzania żywności, formy organizacyjne, tradycyjne i współczesne funkcjonowanie obszarów wiejskich, rozbieżność funkcji obszarów wiejskich i rolnictwa. Omówiono dezagraryzację, czynniki warunkujące przemiany w rolnictwie, zmiany w celach i zadaniach techniki rolnej i inżynierii rolniczej, wielofunkcyjny rozwój wsi a globalizację produkcji rolnej.
Paper discussed the following questions connected with contemporary development of the countryside. Transformations on the rural areas, in agriculture and agricultural production. Intensive and extensive rates of food production, organizational forms. Traditional and nowadays functioning forms of the rural areas. Divergent functions of rural areas and farming. Factors affecting the transformations in farming. Changes in goals and objectives of agrarian technology and agricultural engineering. Multifunctional development of rural areas against the globalization of agricultural production.
Źródło:
Problemy Inżynierii Rolniczej; 2009, R. 17, nr 1, 1; 23-34
1231-0093
Pojawia się w:
Problemy Inżynierii Rolniczej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dizelnoe biotoplivo s zhirosoderzhashhikh otkhodov pticevodstva
Biodiesel with fat - containing poultry waste
Autorzy:
Mushtryk, M.
Sukhenko, J.
Powiązania:
https://bibliotekanauki.pl/articles/76318.pdf
Data publikacji:
2014
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
esterification
biofuel
production technology
biodiesel fuel
waste
poultry processing plant
methyl ester
chicken
free fatty acid
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2014, 16, 3
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies