Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "footing" wg kryterium: Temat


Tytuł:
Size Effects in Problems of Footings on Sand within Micro-Polar Hypoplasticity
Autorzy:
Tejchman, J.
Górski, J.
Powiązania:
https://bibliotekanauki.pl/articles/241079.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
footing
micro-polar hypoplasticity
sand
shear localization
size effect
stratified sampling
void ratio
Opis:
Numerical FE investigations of size effects in problems of footings on sand were performed. Micro-polar hypoplastic constitutive model was used to describe a mechanical behaviour of a cohesionless granular material during a monotonic deformation path. The FE analyses were carried out with three different footing widths. In deterministic calculations, a uniform distribution of initial void ratio was used. In statistical calculations, initial void ratios took the form of random spatial fields described by a truncated Gaussian random distribution. In order to reduce the number of stochastic realizations without sacrificing the accuracy of the calculations, a stratified sampling method was applied. The numerical results were compared with corresponding laboratory tests by Tatsuoka et al (1997). The numerical results show that the bearing capacity of footings decreases with increasing specimen size. If the initial void ratio is stochastically distributed, the mean bearing capacity of footings may be larger than the deterministic value. The statistical size effect is smaller than the deterministic one.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2008, 55, 3-4; 95-124
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza MES-MKEB nieliniowego problemu współdziałania ławy fundamentowej z podłożem gruntowym
The FEM-CBEM analysis of nonlinear interaction problem of continuous footing and subsoil
Autorzy:
Fedczuk, P.
Powiązania:
https://bibliotekanauki.pl/articles/348845.pdf
Data publikacji:
2010
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
metoda elementów skończonych
metoda kontaktowych elementów brzegowych
układ "ława fundamentowa-podłoże gruntowe"
finite elements method
contact boundary element method
system "continuous footing-subsoil"
Opis:
Niniejsza praca prezentuje koncepcję zastosowania kombinowanej metody (składającej się z metody elementów skończonych MES i kontaktowych elementów brzegowych MKEB) do analizy trójwymiarowego problemu współdziałania układu "ława fundamentowa-podłoże gruntowe". Zawiera ona elementarne podstawy teoretyczne, uwzględniające sformułowanie globalnego równania równowagi i prezentację sposobu rozwiązania tej relacji (wykorzystującego technikę przyrostowo-iteracyjną, opartą na metodzie Raphsona-Newtona). Zostały zamieszczone wyniki obliczeń dla przykładu układu "ława fundamentowa-podłoże gruntowe" (z użyciem sprężysto-plastycznego modelu gruntu Modified Cam-Clay).
The following paper presents the concept of using a combined method (consisting of finite element method FEM and contact boundary element method CBEM) to analyze the 3-D interaction problem of system "continuous footing-subsoil". It comprises elementary theoretical basis, considering formulation of global equation of equilibrium and presentation of the method of solution this relation (using a step-iterative technique based upon the Raphson-Newton method). Calulation results for specific example of system "continuous footing-subsoil" (with using elasto-plastic soil model Modified Cam-Clay) was presented.
Źródło:
Górnictwo i Geoinżynieria; 2010, 34, 2; 231-238
1732-6702
Pojawia się w:
Górnictwo i Geoinżynieria
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Osiadania stóp fundamentowych na piaskach
Settlements of pad footings on sands
Autorzy:
Dołżyk, K.
Powiązania:
https://bibliotekanauki.pl/articles/403037.pdf
Data publikacji:
2010
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
stopy fundamentowe
piaski
osiadania stóp
pad footings
sands
pad footing settlement
Opis:
W pracy przedstawiono zagadnienie osiadań stóp fundamentowych na piaskach. Wartości osiadań oszacowano stosując wzory otrzymane z teorii sprężystości, przyjmując wartości modułu sprężystości z normy PN-81/B-03020 i otrzymane teoretycznie. Dla piasków kwarcowych moduł sprężystości zależy od wskaźnika porowatości (stopnia zagęszczenia) i poziomu naprężeń. Norma PN-81/B-03020 nie uwzględnia zależności modułu sprężystości od poziomu naprężeń (wielkości stopy). Otrzymane osiadania stóp odpowiadające wartościom teoretycznym modułu sprężystości są znacząco niższe od wartości odpowiadających wartościom normowym modułów dla dużych stóp fundamentowych posadowionych na średnich i grubych piaskach w stanie luźnym oraz średnio zagęszczonym. Stosując inżynierskie sposoby obliczeń osiadań stóp bardziej realne wartości otrzymamy określając moduły sprężystości piasków teoretycznie niż stosując wartości normowe.
This paper aim to present the problem of pad footing settlement on sands. Using the empirical procedure, the settlement of pad footing is a function of Young's modulus. In this paper two values of Young's modulus are used, one value is taken from PN-81/B-03020 and the other one is obtained from theoretical equation. The value of Young's modulus obtained from the theoretical equation is a function of void ratio (e) and the level of stress (size of foundation). The value of Young's modulus shown in PN-81/B-03020 is a function of density index (ID), but is independent of stress level. This paper shows that settlement of pad footing on sand is much less if theoretical value of Young's modulus is used in calculation, especially for a big pad footing on loose or medium compacted coarse and medium sands. So, if theoretical value of Young's modulus is used, the calculated value of pad footing settlement is more realistic.
Źródło:
Budownictwo i Inżynieria Środowiska; 2010, 1, 4; 269-273
2081-3279
Pojawia się w:
Budownictwo i Inżynieria Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Определение внутренних усилий в фундаментных плитах с выпуклой подошвой под колонны при действии внецентренной нагрузки
Autorzy:
Gricuk, M. S.
Hulboj, R.
Powiązania:
https://bibliotekanauki.pl/articles/2068390.pdf
Data publikacji:
2010
Wydawca:
Politechnika Częstochowska
Tematy:
stopa fundamentowa
podstawa piramidalna
fundament
spot footing
pyramidal base
foundation
Opis:
В cтaтьe дано определениe внутpeнниx yсилий в расчётных сечениях плитных фундаментов с пирамидальной подошвой при действии внецентренной нагрузки.
Przedstawiono obliczanie sił wewnętrznych w przekrojach obliczeniowych stóp fundamentowych o podstawie piramidalnej przy działaniu mimośrodowego obciążenia. Stwierdzono, że w stopach fundamentowych o podstawie piramidalnej siły wewnętrzne są 30 ÷ 50% mniejsze niż w stopach o podstawie płaskiej.
Źródło:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo; 2010, 16 (166); 121-125
0860-7214
Pojawia się w:
Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nadpłata podatku powstała w wyniku orzeczenia Trybunału Konstytucyjnego
Overpayment as a result of a judgment of the Constitutional Tribunal
Autorzy:
Szymczak, Aneta
Powiązania:
https://bibliotekanauki.pl/articles/692936.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet im. Adama Mickiewicza w Poznaniu
Tematy:
overpayment
overpayment made as a result of a judgment delivered by the Constitutional Tribunal
lack of legal footing for tax payment
effects of the judgment of the Polish Constitutional Tribunal
nadpłata
nadpłata powstała w wyniku orzeczenia Trybunału Konstytucyjnego
zwrot podatku
skutki wyroków Trybunału Konstytucyjnego
brak podstawy prawnej
Opis:
The paper concerns the concept of overpayment made as a result of a judgment delivered by the Constitutional Tribunal in reference to Article 72 and 74 of the Tax Ordinance Act. Although the doctrine and the judicature of administrative courts view overpayment under Article 74 as stemming from Article 72 of the Tax Ordinance Act, there are certain distinct features of the two. Taking into consideration the potential effects of the judgment of the Polish Constitutional Tribunal, a tax paid when the legal footing of this tax was in existence is considered as being due at the date of payment. A distinction is made between overpayment stemming from article 74 and overpayment stemming from article 72. The latter features a lack of legal footing for tax payment. This distinction also has further implications and consequences.
Artykuł poświęcony jest analizie pojęcia „nadpłata powstała w wyniku orzeczenia Trybunału Konstytucyjnego”, w tym w szczególności różnicy między nadpłatą z art. 72 Ordynacji podatkowej (o.p.) i nadpłatą z art. 74 o.p. Brak rozróżnienia istoty obu nadpłat powoduje poważne trudności w określeniu ich skutków, co widoczne jest obecnie w orzecznictwie sądów administracyjnych. Ponieważ brak definicji „nadpłaty powstałej w wyniku orzeczenia TK”, próba wskazania jej natury prawnej wymaga przede wszystkim uwzględnienia skutków wyroków Trybunału Konstytucyjnego, określonych w art. 190 ust. 1, 3 i 4 Konstytucji RP. Z powołanych przepisów Konstytucji wynika, że w polskim porządku prawnym wyroki Trybunału mają charakter konstytutywny i działają ex nunc, a więc wywołują skutek na przyszłość. Oznacza to, że do chwili ogłoszenia przepis uznany za niekonstytucyjny obowiązywał w systemie prawa i wywierał skutki prawne. W konsekwencji wynika z tego, że podatek uiszczony na podstawie przepisu, którego zgodność z Konstytucją zakwestionował Trybunał, był w momencie zapłaty podatkiem należnym. Nie można zatem uznać, że – tak jak w wypadku nadpłaty z art. 72 o.p. – mamy do czynienia ze świadczeniem nienależnym, uiszczonym bez podstawy prawnej. Wręcz przeciwnie: podstawa taka istniała, korzystała z domniemania konstytucyjności i nie odpadła z mocą wsteczną. Artykuł 74 o.p., który w zakresie pełnionych funkcji stanowi realizację art. 190 ust. 4 Konstytucji RP na gruncie Ordynacji podatkowej, stanowi podstawę odrębnego roszczenia o zwrot uiszczonego podatku.
Źródło:
Ruch Prawniczy, Ekonomiczny i Socjologiczny; 2013, 75, 4; 107-119
0035-9629
2543-9170
Pojawia się w:
Ruch Prawniczy, Ekonomiczny i Socjologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of various transmission line models on lightning overvoltages in insulation coordination studies
Porównanie modeli linii przesyłowych stosowanych do wykonywania analiz przepięciowych w systemach elektroenergetycznych
Autorzy:
Oramus, P.
Florkowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/266738.pdf
Data publikacji:
2014
Wydawca:
Politechnika Gdańska. Wydział Elektrotechniki i Automatyki
Tematy:
GIS substation
lightning overvoltages
tower footing
resistance
transmission line model
modele linii przesyłowych
przepięcia atmosferyczne
rezystancja uziemienia słupów
rozdzielnica GIS
Opis:
Lightning overvoltages occurring in electrical power systems are especially dangerous for devices installed in network. Lightning transients may cause damages of devices installed in power system. Therefore, analysis of lightning overvoltages in electrical power systems is important to ensure reliability of power supply. For this purpose, development of mathematical models is necessary, however mathematical complexity can lead to slightly different results. In this paper, both various overhead transmission lines models as well as exemplary insulation coordination analysis performed in HV power system have been presented. Simulation results performed for various models of overhead lines implemented in EMTP/ATP software have been presented and compared in this paper.
Przepięcia atmosferyczne są szczególnie niebezpiecznie dla urządzeń zainstalowanych w sieciach elektroenergetycznych. Z tego powodu, zdeterminowanie poziomu przewidywanych przepięć atmosferycznych jest istotne z punktu widzenia koordynacji izolacji. Do tego celu, konieczne jest opracowanie modeli matematycznych poszczególnych elementów sieci elektroenergetycznej. Jednakże, w zależności od sposobu modelowania, wyniki symulacji mogą się różnić pomiędzy sobą. Artykuł zawiera zestawienie trzech modeli matematycznych linii przesyłowych, mogących posłużyć do przeprowadzania symulacji przepięć atmosferycznych. W artykule przedstawiono wyniki symulacji przepięć atmosferycznych przeprowadzonych dla przykładowego systemu z wykorzystaniem różnych modeli linii przesyłowych.
Źródło:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej; 2014, 40; 81-84
1425-5766
2353-1290
Pojawia się w:
Zeszyty Naukowe Wydziału Elektrotechniki i Automatyki Politechniki Gdańskiej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nośność na przebicie krępych płyt żelbetowych – badania i analiza metodą S-T
Punching shear behavior of thick reinforced concrete slabs according to Strut-and-Tie model
Autorzy:
Urban, T.
Krakowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/391037.pdf
Data publikacji:
2014
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
metoda kratownicowa (strut-and-tie)
przebicie osiowe
smukłość ścinania
fundament
efekt skali
Strut-and-tie model
punching shear
shear slenderness
footing
size effect
Opis:
W pracy przedstawiono próbę analizy nośności na przebicie płyt krępych za pomocą metody kratownicowej (strut-and-tie, S-T). Procedura obliczeniowa została porównana z wynikami własnych badań eksperymentalnych. Zakres analizy obejmuje wyłącznie elementy bez zbrojenia poprzecznego obciążone osiowo symetrycznie.
The punching shear behavior of thick reinforced concrete slabs was analyzed in this paper by using strut-and-tie model (S-T). Calculating procedures were compared to our own experimental test results. The analyzed elements were subjected to symmetric loading and without shear reinforcement.
Źródło:
Budownictwo i Architektura; 2014, 13, 3; 183-191
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reliability analysis of bearing capacity of square footing on soil with strength anisotropy due to layered microstructure
Autorzy:
Kawa, M.
Powiązania:
https://bibliotekanauki.pl/articles/178907.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
layered microstructure
square footing
strength anisotropy
reliability analysis
probability of failure
factor of safety
Opis:
The paper deals with reliability analysis of square footing on soil with strength anisotropy. The strength of the soil has been described with identified anisotropic strength criterion dedicated to geomaterials with layered microstructure. The analysis assumes dip angle α and azimuth angle β which define direction of lamination of the structure to be random variables with given probability density functions. Bearing capacity being a function of these variables is approximated based on results of deterministic simulations obtained for variety of orientations. The weighted regression method by Kaymaz and McMahon within the framework of Response Surface Method is used for the approximation. As a result of analysis, global factor of safety that corresponds to assumed value of probability of failure is determined. The value of the safety factor denotes the ratio between the value of the design load and the mean value of bearing capacity which is needed to reduce the probability of failure to the acceptable level. The procedure of calculating the factor has been presented for two different cases. In the first case, no information about lamination direction of the soil has been provided and thus all the orientations are assumed to be equally probable (uniform distribution). In the second case, statistical information including mean, variance and assumed probability distribution for both α and β angle is known. For the latter case, using results obtained for few different values of mean of angle α, also the influence of strength anisotropy on the value of global factor of safety is shown.
Źródło:
Studia Geotechnica et Mechanica; 2015, 37, 4; 19-28
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Random analysis of bearing capacity of square footing using the LAS procedure
Autorzy:
Kawa, M.
Puła, W.
Suska, M.
Powiązania:
https://bibliotekanauki.pl/articles/178223.pdf
Data publikacji:
2016
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
LAS procedure
Local Average Subdivision
random fields theory
square footing
reliability analysis
Opis:
In the present paper, a three-dimensional problem of bearing capacity of square footing on random soil medium is analyzed. The random fields of strength parameters c and φ are generated using LAS procedure (Local Average Subdivision, Fenton and Vanmarcke 1990). The procedure used is re-implemented by the authors in Mathematica environment in order to combine it with commercial program. Since the procedure is still tested the random filed has been assumed as one-dimensional: the strength properties of soil are random in vertical direction only. Individual realizations of bearing capacity boundary-problem with strength parameters of medium defined the above procedure are solved using FLAC3D Software. The analysis is performed for two qualitatively different cases, namely for the purely cohesive and cohesive-frictional soils. For the latter case the friction angle and cohesion have been assumed as independent random variables. For these two cases the random square footing bearing capacity results have been obtained for the range of fluctuation scales from 0.5 m to 10 m. Each time 1000 Monte Carlo realizations have been performed. The obtained results allow not only the mean and variance but also the probability density function to be estimated. An example of application of this function for reliability calculation has been presented in the final part of the paper.
Źródło:
Studia Geotechnica et Mechanica; 2016, 38, 3; 3-13
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effective width rule in the analysis of footing on reinforced sand slope
Autorzy:
Abdi, Abdelmadjid
Abbeche, Khelifa
Athmania, Djamel
Bouassida, Mounir
Powiązania:
https://bibliotekanauki.pl/articles/178217.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
bearing capacity
eccentricity
footing
geogrid
model test
slope
Opis:
This paper presents the results obtained from an experimental programme and numerical investigations conducted on model tests of strip footing resting on reinforced and unreinforced sand slopes. The study focused on the determination of ultimate bearing capacity of strip footing subjected to eccentric load located either towards or opposite to the slope facing. Strip footing models were tested under different eccentricities of vertical load. The obtained results from tests conducted on unreinforced sand slope showed that the increase in eccentricity of applied load towards the slope facing decreases the ultimate bearing capacity of footing. Predictions of the ultimate bearing capacity obtained by the effective width rule are in good agreement with those proposed from the consideration of total width of footing subjected to eccentric load. The ultimate bearing capacity of an eccentrically loaded footing on a reinforced sand slope can be derived from that of axially loaded footing resting on horizontal sand ground when adopting the effective width rule and the coefficient of reduction due to the slope. When increasing the distance between the footing border to the slope crest, for unreinforced and reinforced ground slope by geogrids, the ultimate bearing capacity of footing is no more affected by the slope ground.
Źródło:
Studia Geotechnica et Mechanica; 2019, 41, 1; 42-55
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental bearing capacity of eccentrically loaded foundation near a slope
Autorzy:
Mansouri, Tarek
Abbeche, Khelifa
Powiązania:
https://bibliotekanauki.pl/articles/178276.pdf
Data publikacji:
2019
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
square footing
bearing capacity
slope
relative density
eccentric load
Opis:
Based on the response of small-scale model square footing, the present paper shows the results of an experimental bearing capacity of eccentrically loaded square footing, near a slope sand bed. To reach this aim, a steel model square footing of (150 mm × 150 mm) and a varied sand relative density of 30%, 50% and 70% are used. The bearing capacity-settlement relationship of footing located at the edge of a slope and the effect of various parameters such as eccentricity (e) and dimensions report (b/B) were studied. Test results indicate that ultimate bearing capacity decreases with increasing load eccentricity to the core boundary of footing and that as far as the footing is distant from the crest, the bearing capacity increases. Furthermore, the results also prove that there is a clear proportional relation between relative densities –bearing capacity. The model test provides qualitative information on parameters influencing the bearing capacity of square footing. These tests can be used to check the bearing capacity estimated by the conventional methods.
Źródło:
Studia Geotechnica et Mechanica; 2019, 41, 1; 33-41
0137-6365
2083-831X
Pojawia się w:
Studia Geotechnica et Mechanica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Story of the Nearest Relative: Shifts in Footing in Dramaturgical Replayings
Autorzy:
Morriss, Lisa
Smith, Greg
Powiązania:
https://bibliotekanauki.pl/articles/623365.pdf
Data publikacji:
2019
Wydawca:
Uniwersytet Łódzki. Wydawnictwo Uniwersytetu Łódzkiego
Tematy:
Conversational Interaction
Goffman
Dramaturgical Replaying
Footing
Opis:
This discussion assesses the utility of Goffman’s thinking about conversational interaction for illuminating features of a research interview between one of the two authors (LM) and a fellow social work professional. We use this case to explore aspects of Goffman’s contribution to the sociological understanding of spoken interaction. While many of his ideas offer rich sources of guidance for interactionist and qualitative researchers, the value of Goffman’s (1974) concept of “dramaturgical replaying” has been overlooked. We trace the leading themes of Goffman’s thinking about conversational interaction and show how they can provide an analysis of the story of the “Nearest Relative” that is attentive to its live, improvised enactment. Goffman’s approach to storytelling is shown to be distinct from but complementary to conversation analytic approaches to storytelling.
Źródło:
Qualitative Sociology Review; 2019, 15, 2; 74-88
1733-8077
Pojawia się w:
Qualitative Sociology Review
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical study of ultimate bearing capacity of rectangular footing on layered sand
Autorzy:
Panwar, V.
Dutta, R. K.
Powiązania:
https://bibliotekanauki.pl/articles/952456.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
rectangular footing
finite element analysis
bearing capacity
layered sandstone
analiza elementów skończonych
nośność podłoża
Opis:
Purpose: The purpose of this study is to investigate the ultimate bearing capacity of the rectangular footing resting over layered sand using finite element method. Design/methodology/approach: Finite element analysis was used to investigate the dimensionless ultimate bearing capacity of the rectangular footing resting on a limited thickness of upper dense sand layer overlying limitless thickness of lower loose sand layer. The friction angle of the upper dense sand layer was varied from 41° to 46° whereas for the lower loose sand layer it was varied from 31° to 36°. Findings: The results reveal that the dimensionless ultimate bearing capacity was found to increase up to an H/W ratio of about 1.75 beyond which the increase was marginal. The results further reveal that the dimensionless ultimate bearing capacity was the maximum for the upper dense and lower loose sand friction angles of 46° and 36°, while it was the lowest for the upper dense and lower loose sands corresponding to the friction angle of 41° and 31°. For H/W = 0.5 and 2, the dimensionless bearing capacity decreases with the increase in the L/W ratio from 0.5 to 6 beyond which the dimensionless ultimate bearing capacity remains constant for all combinations of parameters. The results were presented in nondimensional manner and compared with the previous studies available in literature. Research limitations/implications: The analysis is performed using a ABAQUS 2017 software. The limitation of this study is that only finite element analysis is performed without conducting any experiments in the laboratory. Further the study is conducted only for the vertical loading. Practical implications: This proposed numerical study can be used to predict the ultimate bearing capacity of the rectangular footing resting on layered sand. Originality/value: The present study gives idea about the ultimate bearing capacity of rectangular footing when placed on layered sand (dense sand over loose sand) as well as the effect of thickness of top dense sand layer on the ultimate bearing capacity. The findings could be used to calculate the ultimate bearing capacity of the rectangular footing on layered sand.
Źródło:
Journal of Achievements in Materials and Manufacturing Engineering; 2020, 101, 1; 15-26
1734-8412
Pojawia się w:
Journal of Achievements in Materials and Manufacturing Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A study of bearing capacity of skirted octagonal footings resting on different sands
Autorzy:
Thakur, A.
Dutta, R.K.
Powiązania:
https://bibliotekanauki.pl/articles/2175811.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Komputerowej Nauki o Materiałach i Inżynierii Powierzchni w Gliwicach
Tematy:
bearing capacity
sands
octagonal footing
singly skirted (SS)
doubly skirted (DS)
nośność
piaski
stopa fundamentowa ośmiokątna
Opis:
Purpose: After a thorough study of literature it is concluded that the studies related to unskirted/skirted octagonal footings on sand have not yet been investigated. Thus, this paper presents a numerical analysis to assess the ultimate bearing capacity of the unskirted, unskirted-embedded, singly and doubly skirted octagonal footings resting on different sands (S1, S2, and S3). The length of skirt and depth of the embedded footing were varied from 0.0B to 1.5B. Design/methodology/approach: The numerical square and octagonal footing with singly and doubly skirted footing models were developed using Plaxis 3D software. Findings: The results of the doubly skirted octagonal footings ultimate bearing capacity were marginally higher in comparison to the singly skirted footing at all normalised skirt depths as well as for all sands up to a Ds/B ratio 0.25 beyond which the increase in the ultimate bearing capacity in case of doubly skirted footing was appreciable. Research limitations/implications: The results presented in this paper were based on numerical analysis. However, for the actual footings the soil placement and compaction, details of skirt construction and the stress level will be different from the numerical analysis. Further investigations using full-scale numerical models simulating field size footings were recommended to generalize the results. Originality/value: No such study on singly and doubly skirted octagonal shaped footings were conducted so far. Hence, an attempt was made in this article to predict the bearing capacity of those footings using Plaxis 3D.
Źródło:
Archives of Materials Science and Engineering; 2021, 107, 1; 21--31
1897-2764
Pojawia się w:
Archives of Materials Science and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of Seismic Bearing Capacity of a Strip Footing Resting on Reinforced Earth Bed using Pseudo-Static Analysis
Autorzy:
Jaiswal, Sagar
Chauchan, Vinay Bhusan
Powiązania:
https://bibliotekanauki.pl/articles/2051717.pdf
Data publikacji:
2021
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
reinforced earth
bearing capacity
strip footing
finite element method
pseudo-static analysis
wzmocnienie podłoża
nośność
ława fundamentowa
metoda elementów skończonych
analiza pseudostatyczna
Opis:
The use of geosynthetic reinforcement to enhance the ultimate load-bearing capacity and reduce the anticipated settlement of the shallow foundation has gained sufficient attention in the geotechnical field. The improved performance of the shallow foundation is achieved by providing one or more layers of geosynthetics below the foundation. The full wraparound technique proved to be efficient for the confinement of soil mass and reduction in settlement of foundation however lacks the literature to ascertain the performances of such footing under dynamic loading. In view of the above, the present study examines the effect of geosynthetic layers having a finite length with full wraparound ends as a reinforcement layer, placed horizontally at a suitable depth below the foundation using the finite element modeling (FEM) and evaluates the ultimate load-bearing capacity of a strip footing resting on loose and dense coarse-grained earth beds under seismic loading and further compared to those of footing resting on unreinforced earth bed. Moreover, the effect of horizontal seismic acceleration coefficient (kh) on the ultimate load-bearing capacity has been investigated by varying kh from 0.1 to 0.6 at an interval of 0.1, for both reinforced and unreinforced earth bed having loose and dense soil strata. Furthermore, this study demonstrates that by adopting the new practice of using the geosynthetic reinforcement with the full wraparound ends in foundations, it is possible to support relatively heavier structures under static as well as dynamic loading without allowing large footing settlements. From the outcomes of the present study, it is noted that the ultimate load-bearing capacity of footing resting on loose and dense sand bed found to be improved by 60% and 18% for soils having friction angle of 25° and 40°, respectively compared to respective unreinforced earth beds under static condition.
Źródło:
Civil and Environmental Engineering Reports; 2021, 31, 2; 117-137
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies