Temat: flue gas - Katalog OPAC zbiorów

Skocz do pozycji: 1.

Tytuł:: Computer simulation of the genetic controller for the EB flue gas treatment process
Autorzy:: Moroz, Z.
Boużyk, J.
Sowiński, M.
Chmielewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/147569.pdf
Data publikacji:: 2001
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: genetic algorithm controller
flue gas
Opis:: The use of the computer genetic algorithm (GA) for driving a controller device for the industrial flue gas purification systems employing the electron beam irradiation, has been studied. As the mathematical model of the installation the properly trained artificial neural net (ANN) was used. Various cost functions and optimising strategies of the genetic code were tested. These computer simulations proved, that ANN + GA controller can be sufficiently precise and fast to be applied in real installations.
Źródło:: Nukleonika; 2001, 46, 3; 107-115
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 2.

Tytuł:: Functioning of the flue gas treatment system in Polish municipal waste incineration plants
Autorzy:: Czerwińska, Justyna
Wielgosiński, Grzegorz
Powiązania:: https://bibliotekanauki.pl/articles/118747.pdf
Data publikacji:: 2020
Wydawca:: Szkoła Główna Gospodarstwa Wiejskiego w Warszawie. Wydawnictwo Szkoły Głównej Gospodarstwa Wiejskiego w Warszawie
Tematy:: flue gas treatment
waste incineration plant
dioxins
Opis:: All municipal waste incineration plants operating in Poland are discussed and their flue gas treatment systems are described in detail in the article. A comparison of performance indicators, i.e. the amount of raw materials consumed particularly in flue gas treatment systems, is presented. The article also summarizes the results of emission measurements for eight incineration plants in the years 2016–2019.
Źródło:: Scientific Review Engineering and Environmental Sciences; 2020, 29, 1; 108-119
1732-9353
Pojawia się w:: Scientific Review Engineering and Environmental Sciences
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 3.

Tytuł:: The impact of unevenness and instability of flue gas temperature on the technical condition of gas turbine blades
Autorzy:: Błachnio, J.
Kułaszka, A.
Perczyński, J.
Powiązania:: https://bibliotekanauki.pl/articles/243064.pdf
Data publikacji:: 2018
Wydawca:: Instytut Techniczny Wojsk Lotniczych
Tematy:: flue gas temperature
gas turbine
blade
diagnostics
technical condition
Opis:: Gas turbines are used in the power sector, aviation, pump houses, and other technical systems. Such a broad range of application is associated with favourable indicators: high power, rather low weight per unit of power, significant efficiency, as well as high durability. All of these indicators greatly depend on the combustion chamber flue gas temperature. It is important for the flue gas temperature to be uniform around the turbine perimeter and stable over time. This condition is extremely important also in the case of frequent temperature variations associated, e.g. with a variable operating range of a manoeuvre aircraft turbojet engine. The paper analyses the causes for the unevenness and instability of combustion chamber flue gas temperature. The impact of the fuel quality, the technical condition of the fuel supply system, as well as the operating conditions of the combustion chamber-turbine assembly was shown. The issues regarding the presence of various types of damage to turbine elements, their blades in particular, were defined. The main cause behind the damage is the unevenness and instability of flue gas temperature, resulting in the presence of overheating, creeping, thermal fatigue, high-temperature corrosion of blade material. The forms of that damage, especially the first turbine stages, were presented. Blade material microstructure test results showed increased layer thickness, grain-size, and especially, adverse modification of the strengthening γ' phase in the temperature function. It was concluded periodic diagnostics of turbine blades with the optical method enables the non-invasive evaluation of their technical condition and drawing conclusions in terms of their durability.
Źródło:: Journal of KONES; 2018, 25, 2; 45-51
1231-4005
2354-0133
Pojawia się w:: Journal of KONES
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 4.

Tytuł:: Proposal of a Method for Measuring Gas Flow in a Heating Furnace: A Simulation Study
Autorzy:: Pástor, Marcel
Durdán, Milan
Kačur, Ján
Laciak, Marek
Flegner, Patrik
Powiązania:: https://bibliotekanauki.pl/articles/2023997.pdf
Data publikacji:: 2021
Wydawca:: Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:: modeling
simulation
flue gas
burners
gas flows
volume zones
Opis:: Metallurgy, as one of the oldest industries, is currently experiencing a technological boom in an effort to increase production efficiency with the least possible impact on the environment. Modeling methods make it possible to design and simulate a technological process or technological equipment for conditions that take into account the above-mentioned aspects. For this reason, the article focuses on the use of simulation modeling using accessible computer technologies in order to improve the operation of heating aggregates with the metal-bearing batch, such as a continuous heating furnace. The paper describes the methodology for modeling the flow of flue gases in the working space of a gas heating furnace, which results in their enthalpy representation. A simulation study was performed for a gas-fired furnace used to heat gates. Three case studies were simulated with set values of on and off burners and fuel flow to them. The effect of these parameters on the total amount of recirculated flue gas was investigated. The results showed that the fuel flow regulation to the burners at the material inlet into the furnace had a higher effect on the overall recirculation than the switching on and off the burners on the furnace's outlet side. The results pointed to critical points on the inner shell of the furnace, which could be the most critically thermally stressed, for example, in the places of the collision of opposing flue gas flows.
Źródło:: Advances in Science and Technology. Research Journal; 2021, 15, 2; 1-12
2299-8624
Pojawia się w:: Advances in Science and Technology. Research Journal
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 5.

Tytuł:: Analiza niesprawności urządzeń odsiarczania
Analysis of failure of suspension devices
Autorzy:: Ciecieląg, J.
Wiśniewski, M.
Powiązania:: https://bibliotekanauki.pl/articles/314904.pdf
Data publikacji:: 2018
Wydawca:: Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:: odsiarczanie spalin
absorber
pompa
flue gas desulphurization
pump
Opis:: W artykule omówiony został zarys problemów eksploatacyjnych instalacji odsiarczania spalin metodą mokrą w elektrowni węglowej na węgiel kamienny.
The article discusses the operational problems of the flue gas desulphurisation installation in a coal-fired power plant for hard coal.
Źródło:: Autobusy : technika, eksploatacja, systemy transportowe; 2018, 19, 12; 706-714
1509-5878
2450-7725
Pojawia się w:: Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 6.

Tytuł:: Application of ionizing radiation to environment protection
Autorzy:: Chmielewski, A.
Powiązania:: https://bibliotekanauki.pl/articles/147932.pdf
Data publikacji:: 2005
Wydawca:: Instytut Chemii i Techniki Jądrowej
Tematy:: electron accelerator
gamma rays
flue gas
wastewater
sludge
Opis:: Radiation technology may contribute to the environmental protection to a great extent. Electron beam industrial installations for flue gases containing SOx and NOx treatment have been already built in China and Poland. The same technology for high sulphur and high humidity off-gases (low quality lignite) has been successfully tested in an industrial pilot plant in Bulgaria. Pilot plant tests performed in Japan have illustrated that by applying electron beam for municipal waste incinerator off-gases treatment the concentration of dioxins can be reduced by 80%, other persistent organic pollutants can be depredated as well. The positive results of electron beam wastewater treatment are the basis for a full-scale industrial plant being built in the South Korea. A pilot gamma plant for sludge irradiation producing a high grade organic fertilizer is in operation in India. All these achievements are reported in this paper.
Źródło:: Nukleonika; 2005, 50,suppl.3; 17-24
0029-5922
1508-5791
Pojawia się w:: Nukleonika
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 7.

Tytuł:: Use of Metal Oxide-Modified Aerated Concrete for Cleaning Flue Gases from Carbon Monoxide
Autorzy:: Ivanenko, Olena
Gomelya, Nikolai
Shabliy, Tetyana
Trypolskyi, Andrii
Nosachova, Yuliia
Leleka, Serhii
Trus, Inna
Strizhak, Peter
Powiązania:: https://bibliotekanauki.pl/articles/1838428.pdf
Data publikacji:: 2021
Wydawca:: Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:: carbon monoxide
flue gas
purification
catalyst
oxidation
conversion
Opis:: The necessity of development of technical solutions that will allow to reduce carbon monoxide emissions of flue gases of industrial productions is substantiated. It is shown that the most rational design solution to the problem of carbon monoxide pollution during the firing of electrode blanks is the use of aerated concrete blocks with a catalyst, which can be quickly and conveniently located directly on the carbon material of the “green” electrodes pouring in the subfloor space of the firing furnaces. Modified by oxides of Mn4+, Fe2+, Fe3+, Cu2+, Cr3+ -catalysts based on aerated concrete were obtained. It is shown that in an empty reactor in the temperature range 200–400 °С the degree of conversion of carbon monoxide in the absence of a catalyst is zero. It is established that on the investigated catalysts based on aerated concrete 100% oxidation of carbon monoxide is achieved at a temperature of 390 °C in the case of using a mixture of catalyst powders 30% CuO + 70% MnO2, 40% CuO + 60% MnO2, 50% Fe (FexCr1-x) 2O4 + 50% MnO2; 50% Fe3O4 + 50 % MnO2. It is determined that the addition of ferrite catalyst powder in aerated concrete in a mixture or without manganese dioxide does not critically affect the mechanical properties of the products.
Źródło:: Journal of Ecological Engineering; 2021, 22, 5; 104-113
2299-8993
Pojawia się w:: Journal of Ecological Engineering
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 8.

Tytuł:: Radiocarbon ¹⁴C method as useful tool for flue gas monitoring application: review
Autorzy:: Stachów, M.
Powiązania:: https://bibliotekanauki.pl/articles/403087.pdf
Data publikacji:: 2016
Wydawca:: Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:: flue gas
monitoring
14C
radiocarbon
spaliny
monitorowanie
radiowęgiel
Opis:: Cosmic-ray research which started just after the second world war in 1947, encouraged widespread use of radioactive particles in many areas of science and technology, starting from astronomy, chemistry, archaeology, biology, botany, medicine and lately ending with environmental studies. Method based on measurements of the radioactive elements remains in various samples (solid, liquid and gaseous) can be very useful tool for ecological and environmental analytical measurements. The ¹⁴C liquid scintillating counting method was used for simplified determination of the biomass content in flue gas from combustion processes or in the finished bio-product. Review of the latest results and progress in this research area shows the growth of interest from industrial sector in normalised method for biomass content determination.
Źródło:: Budownictwo i Inżynieria Środowiska; 2016, 7, 4; 247-251
2081-3279
Pojawia się w:: Budownictwo i Inżynieria Środowiska
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 9.

Tytuł:: Study on optimization simulation of SCR denitration system for marine diesel engine
Autorzy:: Du, J.
Li, R. N.
Wu, X.
Zhang, Y.
Powiązania:: https://bibliotekanauki.pl/articles/259646.pdf
Data publikacji:: 2018
Wydawca:: Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:: marine diesel engine
SCR system
flue gas
flow deflector
Opis:: With the rapid development of shipbuilding industry exhaust world is also very harmful one kind of environmental issues, and the ship marine diesel engine exhaust gas is mainly produced, so in recent years it has developed a diesel engine SCR system. SCR system can control emissions of nitrogen oxides in the exhaust of vessel, furthermore air pollution can be reduced. The main goal of article was using fluent software to correct SCR system selection and flue gas flow under different size best deflector arrangement is simulated. Next goal is further optimize the structure of the SCR system.
Źródło:: Polish Maritime Research; 2018, S 3; 13-21
1233-2585
Pojawia się w:: Polish Maritime Research
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Skocz do pozycji: 10.

Tytuł:: Flue gas desulfurization by mechanically and thermally activated sodium bicarbonate
Autorzy:: Walawska, B.
Szymanek, A.
Pajdak, A.
Nowak, M.
Powiązania:: https://bibliotekanauki.pl/articles/778987.pdf
Data publikacji:: 2014
Wydawca:: Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:: flue gas desulfurization
sodium bicarbonate
surface area
conversion rate
Opis:: This paper presents the results of study on structural parameters (particle size, surface area, pore volume) and the sorption ability of mechanically and thermally activated sodium bicarbonate. The sorption ability of the modified sorbent was evaluated by: partial and overall SO₂ removal efficiency, conversion rate, normalized stoichiometric ratio (NSR). Sodium bicarbonate was mechanically activated by various grinding techniques, using three types of mills: fluid bed opposed jet mill, fine impact mill and electromagnetic mill, differing in grinding technology. Grounded sorbent was thermally activated, what caused a signifi cant development of surface area. During the studiem of SO₂ sorption, a model gas with a temperature of 300°C, of composition: sulfur dioxide at a concentrationof 6292 mg/m_n³ oxygen, carbon dioxide and nitrogen as a carrier gas, was used. The Best development of surface area and the highest SO₂ removal efficiency was obtained for the sorbent treated by electromagnetic grinding, with simultaneous high conversion rate.
Źródło:: Polish Journal of Chemical Technology; 2014, 16, 3; 56-62
1509-8117
1899-4741
Pojawia się w:: Polish Journal of Chemical Technology
Dostawca treści:: Biblioteka Nauki

Artykuł

Zmień widok

na półce

Informacja

Wyszukujesz frazę "flue gas" wg kryterium: Temat

Źródło danych

Dostawca treści

Kolekcja

Rok wydania

Wydawca

Temat

Autor

Typ dokumentu

Język