Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "finish turning process" wg kryterium: Temat


Wyświetlanie 1-2 z 2
Tytuł:
The influence of changing of treatment condition on surface roughness parameter during turning process by wiper insert
Autorzy:
Labuda, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/243562.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
finish turning process
surface roughness parameter
cutting parameters
stainless steel
Opis:
One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process. The technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment, the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. It is crucial to find a suitable solution which will meet the requirements as well as the work conditions of a given machine part. The article presents the results of influence of change of cutting parameters on surface roughness parameter during turning process of stainless steel. A shaft made of 304L stainless steel was used for the research. The chemical composition of steel was measured by Solaris-ccd plus optical spectrometer. The cutting process was carried out on a universal CDS 6250 BX-1000 centre lathes. Measurement of surface roughness was carried out by T8000 profilometer. The turning process was conducted by a cutting tool with Wiper insert. During the turning, the following machining parameters were used: cutting speed Vc [m/min], feed f [mm/rev], cutting depth ap [mm] and additionally changed nose radius r [mm], and tool cutting edge angle ϰr [º]. The results of measurements of Ra parameter underwent statistic analysis. The calculations were conducted by Statistica software.
Źródło:
Journal of KONES; 2019, 26, 1; 81-88
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of cutting parameters on surface topography during turning marine pump shafts
Autorzy:
Labuda, Wojciech
Powiązania:
https://bibliotekanauki.pl/articles/241917.pdf
Data publikacji:
2019
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
finish turning process
surface topography
cutting parameters
stainless steel
Opis:
One of the greatest problems of modern production techniques is the achievement of an appropriate quality at minimal costs and accompanied by the production efficiency increase. Therefore, while designing the production process. The technology used should have a considerable influence on the durability and reliability of machine parts to be produced. During finish treatment, the final dimensions as well as functional properties are imparted to a given element by application of proper treatment type. The engineer has a range of production techniques to choose for the proper surface layer formation. Conventional turning machines belong to the basic equipment of ships, because in sea conditions, they enable the execution of a spare part or carrying out the necessary operations in the process of their regeneration. The use of modern cutting tools makes it possible to obtain a surface with low values of surface roughness parameters. The use of new generation cutting inserts on conventional lathes can cause problems for operators. The lack of the ability to ensure proper of treatment condition and setting errors of cutting tools contribute to the damage of the cutting insert or the surface of the workpiece. The article presents the results of influence of different cutting parameters on surface topography during turning process of stainless steel. A shaft made of 304L stainless steel was used for the research. The cutting process was carried out on a universal TUM 25B x 500 centre lathes. During the turning the following machining parameters were used: cutting speed Vc [m/min], feed f [mm/rev] and depth of cut ap [mm].The turning process was conducted by a cutting tool with CCGT 09T302 UM, CCGT 09T304 UM and CCGT 09T308 UM inserts. Measurement of surface topography was carried out by T8000 profilometer.
Źródło:
Journal of KONES; 2019, 26, 4; 141-148
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-2 z 2

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies