Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "excitation" wg kryterium: Temat


Tytuł:
Analysis of scaffolding harmonic excitation
Autorzy:
Bęc, Jarosław
Błazik-Borowa, Ewa
Szer, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/2204503.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
scaffolding
harmonic excitation
dynamic analysis
direct integration
rusztowanie
wzbudzenie harmoniczne
analiza dynamiczna
integracja bezpośrednia
Opis:
Scaffolding is equipment usually used at construction sites. A scaffolding structure is lightweight and made of elements used many times. The characteristics of scaffolding make it susceptible to dynamic actions present at the structure or occurring nearby. A scaffolding structure of medium size was subjected to analysis in this paper. The structure FEM model was loaded with single force harmonic excitation with various frequencies ranging from 1 Hz to 12 Hz applied in one of many selected points on the scaffolding façade. In the first step, natural frequencies and mode shapes of the analyzed structure were calculated. Then the full dynamic analysis was carried out to obtain maximum displacements of selected control points. The relation of excitation force frequency and location to the amplitudes of generated displacement was observed. It was found that low excitation frequencies close to the natural frequencies of the structure produced vibrations ranging to large areas of the scaffolding surface. Higher excitation frequencies are usually less propagated at the scaffolding but still may produce some discomfort to the structure users in the vicinity of the excitation force location. Scaffolding is equipment usually used at construction sites. A scaffolding structure is lightweight and made of elements used many times. The characteristics of scaffolding make it susceptible to dynamic actions present at the structure or occurring nearby. A scaffolding structure of medium size was subjected to analysis in this paper. The structure FEM model was loaded with single force harmonic excitation with various frequencies ranging from 1 Hz to 12 Hz applied in one of many selected points on the scaffolding façade. In the first step, natural frequencies and mode shapes of the analyzed structure were calculated. Then the full dynamic analysis was carried out to obtain maximum displacements of selected control points. The relation of excitation force frequency and location to the amplitudes of generated displacement was observed. It was found that low excitation frequencies close to the natural frequencies of the structure produced vibrations ranging to large areas of the scaffolding surface. Higher excitation frequencies are usually less propagated at the scaffolding but still may produce some discomfort to the structure users in the vicinity of the excitation force location.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2023, 71, 1; art. no. e144577
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the ITSG-GRACE daily models in the determination of polar motion excitation function
Autorzy:
Partyka, Aleksander
Nastula, Jolanta
Śliwińska, Justyna
Kur, Tomasz
Wińska, Małgorzata
Powiązania:
https://bibliotekanauki.pl/articles/27314474.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Centrum Badań Kosmicznych PAN
Tematy:
GRACE
hydrological angular momentum
Earth rotation
polar motion excitation
Opis:
The main aim of this study is to evaluate the usefulness of Institute of Geodesy at Graz University of Technology (ITSG) daily gravity field models in the determination of hydrological angular momentum (HAM) at nonseasonal time scales. We compared the equatorial components (χ1 and χ2) of HAM calculated with the ITSG daily gravity field models (ITSG-Gravity Recovery and Climate Experiment [ITSG-GRACE] 2016 and ITSG-GRACE 2018) with HAM and sea-level angular momentum (SLAM) from hydrological land surface discharge model (LSDM) and the hydrological signal in the polar motion excitation (known as geodetic residuals [GAO]). Data from ITSG have a daily temporal resolution and allow us to determine oscillations with higher frequencies than the more commonly used monthly data. We limited our study to the period between 2004 and 2011 because of the gaps in GRACE observations before and after this period. We evaluated HAM obtained from ITSG GRACE models in spectral and time domains and determined the amplitude spectra of the analyzed series in the spectral range from 2 to 120 days. Our analyses confirm the existence of a sub-monthly signal in the HAM series determined from ITSG daily data. We observed a similar signal in LSDM-based HAM, but with notably weaker amplitudes. We also observed common peaks around 14 days in the amplitude spectra for the GAO- and ITSG-based series, which may be related to the Earth’s tides. ITSG daily gravity field models can be useful to determine the equatorial components of HAM at nonseasonal time scales.
Źródło:
Artificial Satellites. Journal of Planetary Geodesy; 2023, 58, 3; 105--121
2083-6104
Pojawia się w:
Artificial Satellites. Journal of Planetary Geodesy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Impulse Excitation in a Watertight Steel Circular Cylindrical Shell and Influence of Structural Configuration on Underwater Radiated Noise
Autorzy:
Wu, Chen-I
Too, Gee-Pinn
Wu, Bo-Hsien
Powiązania:
https://bibliotekanauki.pl/articles/31339791.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
impulse excitation
influence of structural configuration
FEM analysis
underwater noise radiation characteristics
Opis:
This study used experimental measurements and the finite-element method (FEM) simulations to investigate transient underwater radiated noise induced by the impulse excitation of water surrounding a watertight steel-structured circular cylindrical shell submerged in the 176 × 8 × 4 m towing tank. The excitation was caused by dropping an iron block onto a structural bracket in the shell to generate structural vibration. The experimental results were found to be consistent with the FEM results, with the difference between the experimental and simulated sound pressure levels being less than 3 dB. Moreover, it was determined that the structural vibration also generated airborne noise in the cylindrical shell, but this contributed much less than the impulse excitation to the induction of underwater radiated noise. Finally, analysis of the sound field of the underwater noise radiation showed that it was influenced by the wall thickness of the watertight steel cylindrical shell and that of the reinforced bracket seat structure. In particular, the structural reinforcement position proved to be the diffusion breakpoint of the underwater sound radiation. This demonstrates that compared with the studied structure, a thicker and more complex reinforced structure will transmit less or incomplete sound radiation into water.
Źródło:
Archives of Acoustics; 2023, 48, 4; 509-521
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Prediction of laminar-to-turbulent transition in a separated boundary layer subjected to an external acoustic forcing
Autorzy:
Kubacki, S.
Rarata, Z.
Drózdz, A.
Gnatowska, R.
Sokolenko, V.
Elsner, W.
Powiązania:
https://bibliotekanauki.pl/articles/38697107.pdf
Data publikacji:
2023
Wydawca:
Instytut Podstawowych Problemów Techniki PAN
Tematy:
laminar-to-turbulent transition
separated boundary layer
acoustic excitation
algebraic intermittency model
Opis:
The new Reynolds-averaged Navier–Stokes (RANS)-based method has been developed for taking into account, in an approximate manner, the effect of external acoustic forcing on laminar-to-turbulent transition in a separated boundary layer. Experimental studies [33] report an increase of the turbulent shear stress within the separated boundary layer under the influence of acoustic forcing. Enhancement of flow disturbances in a reversed flow region was also reported in our experiment. Experimental findings stimulated the development of a reduced-order aero-acoustic strategy. The effect of acoustic forcing was incorporated into the modelling framework of an algebraic intermittency model. The model component was tuned based on our experimental data and validated on reference experiments. The results show the feasibility of the proposed model to simulate flow over a flat plate and the NACA0018 profile.
Źródło:
Archives of Mechanics; 2023, 75, 5; 591-616
0373-2029
Pojawia się w:
Archives of Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Transient Processes Associated with Turning an Antenna On and Off
Autorzy:
Witenberg, Anna
Powiązania:
https://bibliotekanauki.pl/articles/27311952.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
effective light meter
pulse excitation
transient processes in antenna
Opis:
The paper discusses the phenomena accompanying switching the sinusoidal excitation of an antenna on and off when the antenna is excited by a train of sinusoids containing several to several hundred periods. Transient phenomena are presented against the background of the resonant properties of the antenna. The processes of turning the antenna on and off take place under different conditions and therefore are different. When the antenna is switched on, the transient processes are determined by the antenna properties and the excitation properties. When the antenna is switched off, excitation is no longer present, and the properties of the antenna determine the transient process. We define a new measure of time: the effective light meter.
Źródło:
International Journal of Electronics and Telecommunications; 2023, 69, 4; 675--681
2300-1933
Pojawia się w:
International Journal of Electronics and Telecommunications
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A novel base strain sensitivity measurement system with steady harmonic excitation
Autorzy:
Ye, Chuwei
Powiązania:
https://bibliotekanauki.pl/articles/2173901.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
base strain sensitivity
piezoelectric accelerometer
steady harmonic excitation
calibration
Opis:
Considering the low accuracy and low efficiency of the traditional calibration method for base strain sensitivity of accelerometers, a novel base strain sensitivity calibration system with steady harmonic excitation is proposed. The required cantilever beam for calibration is driven by an electromagnetic exciter to generate a base strain varying in a steady harmonic pattern. By applying a Wheatstone bridge circuit, the generated strain with low distortion can be measured. The measurement system with a compensation function can automatically calibrate the base strain sensitivity. The amplitude linearity and frequency response characteristics of the base strain sensitivity in two accelerometers are obtained experimentally, and the uncertainty in the results is 2% ( = 2).
Źródło:
Metrology and Measurement Systems; 2022, 29, 4; 751--762
0860-8229
Pojawia się w:
Metrology and Measurement Systems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Development of dynamic load factors for human walking excitation for floor vibration design
Autorzy:
Nguyen, Huu Anh Tuan
Lythgo, Noel
Gad, Emad
Wilson, John
Haritos, Nicholas
Powiązania:
https://bibliotekanauki.pl/articles/2174209.pdf
Data publikacji:
2022
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
podłoga
płyta żelbetowa
wibracja podłogi
walking excitation
step frequency
dynamic load factor
floor vibration
design guide
Opis:
This paper discusses the derivation of a set of dynamic load factors for calculation of walking response on the basis of measurements made during a biomechanics research carried out with young adults. Firstly, a quite large number of experimental data on single footstep force were collected. The single footstep forces were then superimposed to generate the force time history for a continuous walk. This was followed by the transformation of the resultant force to the frequency domain from which the dynamic load factors for the first ten harmonics of a pacing rate can be extracted. A statistical analysis was employed on the dynamic load factors to acquire their design values in terms of the 90-th or 95-th percentile. The waking force function recommended by various design guides and that developed in the paper were then used in a comprehensive finite element model to predict the vibration level of a building floor. Current design guides on floor vibration normally suggest using four harmonics in the walking force whereas load factors for ten harmonics were developed in this paper. The acceleration response of the floor was found to increase by 5-33% when walking harmonics beyond the fourth harmonic were considered. The inclusion of higher harmonics would therefore lead to a more conservative estimation of the floor response.
Źródło:
International Journal of Applied Mechanics and Engineering; 2022, 27, 3; 103--114
1734-4492
2353-9003
Pojawia się w:
International Journal of Applied Mechanics and Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy Analysis of Cavitation Bubbles Under Dual-Frequency Acoustic Excitation
Autorzy:
Lv, Liang
Hu, Kai
Liu, Fei
Li, Yawei
Cui, Bing
Powiązania:
https://bibliotekanauki.pl/articles/31339947.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
dual-frequency acoustic excitation
power
sonoluminescence
sonochemistry
Opis:
Cavitation has been widely used in wastewater degradation, material synthesis and biomedical field under dual-frequency acoustic excitation. The applications of cavitation are closely related to the power (i.e. the rate of internal energy accumulation) during bubble collapse. The Keller–Miksis equation considering liquid viscosity, surface tension and liquid compressibility is used to describe the radial motion of the bubble. The model is built in predicting the power during bubble collapse under dual-frequency acoustic excitation. The influences of parameters (i.e. phase difference, frequency difference, and amplitude ratio) on the power are investigated numerically. With the increase of phase difference, the power can be fluctuated in a wide range at all conditions. Three typical characteristics of the power appear under the effects of frequency difference and amplitude ratio. With the increase of amplitude ratio, if the frequency difference is small, the power has two maximum values; and if the frequency difference is medium, there is a maximum value. Otherwise, the power monotonously decreases. The results can provide theoretical references for the selections of experimental parameters of sonoluminescence and sonochemistry in the dual-frequency acoustic field.
Źródło:
Archives of Acoustics; 2022, 47, 4; 513-518
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Mutually Orthogonal Golay Complementary Sequences in Medical Ultrasound Diagnostics. Experimental Study
Autorzy:
Trots, Ihor
Żołek, Norbert
Tasinkevych, Yuriy
Wójcik, Janusz
Powiązania:
https://bibliotekanauki.pl/articles/31340110.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
coded excitation
mutually orthogonal Golay codes
synthetic aperture
ultrasound imaging
Opis:
The objective of this paper is an experimental study of the most crucial parameters of the received acoustic signals (e.g. signal-to-noise ratio (SNR), side-lobes level (SLL), axial resolution) obtained as a result of simultaneous emission of mutually orthogonal Golay complementary sequences (MOGCS) to demonstrate their feasibility of being used in ultrasound diagnostics. Application of the MOGCS in ultrasound measurements allows the image reconstruction time to be shortened without decreasing the resulting quality of reconstructed images in comparison with regular complementary Golay coded sequences (CGCS). In this paper two sets of 16-bits long MOGCS were implemented in the Verasonics Vantage™ (Verasonics Inc., Kirkland, WA, USA) scanner. Ultrasound data were generated using a perfect reflector, a custom-made nylon wire phantom and tissue mimicking phantom. Parameters of the detected MOGCS echoes like SNR, SLL and axial resolution were determined and compared to that of the standard CGCS and the short two-sine cycles pulse. It was evidenced that applying MOGCS did not compromise the parameters of the separated and compressed echoes in comparison to the other types of transmitted signal – the CGCS and the short pulse. Concretely, both the MOGCS and CGCS yield similar SNR increase in comparison to the short pulse. Almost similar values of the axial resolution estimated at the full width at the half maximum level for all types of the transmitted signals were also obtained. At the same time, using the MOGCS the data acquisition speed can be increased twice in comparison with the CGCS signal.
Źródło:
Archives of Acoustics; 2022, 47, 3; 399-405
0137-5075
Pojawia się w:
Archives of Acoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of road excitation on thermal field characteristics of the water-cooled IWM
Autorzy:
Feng, Jie
Tan, Di
Yuan, Meng
Powiązania:
https://bibliotekanauki.pl/articles/1841132.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
road excitation
in-wheel motor drive system
thermal field characteristics
water-cooled in-wheel motor
ekscytacja drogowa
napęd silnikowy
charakterystyka pola cieplnego
silnik chłodzony wodą
Opis:
The in-wheel motor is installed in wheels, and road excitation acts on the in-wheel motor directly through a wheel, which affects the flow field characteristics of the motor’s liquid cooling system, and affects the thermal field characteristics of the in-wheel motor. Aiming at this problem, the in-wheel motor drive system is taken as the research object in this paper. Firstly, the heat flow coupling analysis model of the in-wheel motor drive system is established by using the heat flow coupling theory. Then the vibration response of in-wheel motor stator and shell under different road excitation obtained from the previous study is taken as the load. Finally, thermal field characteristics of the water-cooled the in-wheel motor under different working conditions are studied, and the influence law of different speed and road grades on the thermal field characteristics is obtained. The results show that under the road excitation, the maximum temperature of each component of the in-wheel motor decreases due to the vibration effect of road excitation on the flow field of the cooling system, and the decrease of the stator and winding is the most obvious. Additionally, the higher the speed, the greater the road roughness coefficient, the greater the temperature drop of each component of the in-wheel motor. However, the thermal field distribution of local parts of the motor is relatively uneven under road excitation, which leads to greater thermal stress of the local parts and increases the risk of motor damage.
Źródło:
Archives of Electrical Engineering; 2021, 70, 3; 689-704
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sensitivity Analysis for Influence Parameters of Rail Corrugation Characteristics in Metro Straight Section
Autorzy:
Wang, Z.
Lei, Z.
Powiązania:
https://bibliotekanauki.pl/articles/2023447.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
sensitivity analysis
metro
rail corrugation
friction self-excitation
stochastic finite element
analiza wrażliwości
pofałdowanie szyn
samowzbudzenie tarcia
stochastyczny element skończony
Opis:
Based on the theory of friction self-excited vibration and the measured data of rail corrugation, the cause of rail corrugation in metro straight section was analyzed. Then, using the stochastic finite element method, the sensitivity of each parameter to rail corrugation was studied by selecting the elastic modulus E1 and density ρ1 of the wheel-rail material, the elastic modulus E2 and density ρ2 of the track slab material, the wheel-rail coefficient of friction f, the fastener vertical stiffness K and vertical damping C, the wheel-rail longitudinal relative slip s as the random parameters. The results show that under the support of Cologne egg fastener track, the characteristic frequency of friction self-excited vibration of wheel-rail system is close to the characteristic frequency of measured corrugation, indicating that the occurrence of rail corrugation is related to the friction self-excited vibration of wheel-rail system under the condition of saturated creep force. The parameter sensitivity analysis illustrates that the influence degree of each random parameter on the real part αi of complex eigenvalue is E1>ρ1>C>E2>ρ2>f>K>s in turn. E1, C and s are positively correlated with the real part αi of complex eigenvalue, while the remaining 5 parameters are negatively correlated with the real part αi of complex eigenvalue. Therefore, appropriate decrease of E1, C and s, and increase of ρ1, E2, ρ2, f and K can play a positive role in the control of rail corrugation.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 4; 110-117
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stochastic P-bifurcation of a 3-DOF airfoil with structural nonlinearity
Autorzy:
Hao, Ying
Du, Xuewen
Hu, Yuda
Wu, Zhiqiang
Powiązania:
https://bibliotekanauki.pl/articles/1839715.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
stochastic P-bifurcation
structural nonlinearity
stochastic parametric excitation
Opis:
In this paper, the stochastic-aeroelastic nonlinear response of a three-degree-of-freedom (3-DOF) structural nonlinear airfoil with a control flap is presented. The critical parameter conditions of stochastic P-bifurcation are solved by using the improved average method, the stochastic average method combined with the singularity theory. The results show that the periodic solution produced by Hopf bifurcation has involved a second bifurcation, the nonlinear critical speed of saddle node bifurcation points is advanced, and the airfoil appears bi-stable. The stochastic singularity analysis shows that the increasing stochastic disturbance intensity will cause a greater probability for a large amplitude stochastic flutter.
Źródło:
Journal of Theoretical and Applied Mechanics; 2021, 59, 2; 307-317
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wielobiegunowa prądnica synchroniczna ze wzbudzeniem hybrydowym
A multipolar synchronous generator with hybrid excitation
Autorzy:
Gawron, Stanisław
Glinka, Tadeusz
Powiązania:
https://bibliotekanauki.pl/articles/1857446.pdf
Data publikacji:
2021
Wydawca:
Wydawnictwo Druk-Art
Tematy:
prądnica synchroniczna
magnesy trwałe
wzbudzenie elektromagnetyczne
synchronous generator
permanent magnets
electromagnetic excitation
Opis:
Wielobiegunowa prądnica synchroniczna ma liczbę par biegunów p = pPM + pEM. Bieguny (2pPM) są wzbudzane magnesami trwałymi, a na biegunach (2pEl) jest umieszczone uzwojenie wzbudzenia. W artykule przedstawiono prądnicę synchroniczną o liczbie par biegunów p = 6, przy czym cztery pary biegunów są wzbudzane magnesami trwałymi przyklejonymi na powierzchni nabiegunników, a dwie pary biegunów są wzbudzane elektromagnetycznie. W ten sposób straty mocy wzbudzenia zmniejszają się o 66%. Sześciofazowe uzwojenie twornika (2 x 3 fazy) umożliwia zwiększenie mocy znamionowej prądnicy o 3,4% i o taką samą wartość zmniejszają się straty mocy w uzwojeniu twornika. Prądnica przy pracy samotnej i zmianach mocy obciążenia ma możliwość stabilizacji napięcia, a przy pracy na sieć elektroenergetyczną umożliwia regulację, w sposób ciągły, mocy biernej. Uzwojenie wzbudzenia ma małą masę miedzi, tym samym straty mocy w uzwojeniu wzbudzenia są małe.
A multi-pole synchronous generator has a number of pole pairs p = pPM + pEM. The poles (2pPM) are excited with permanent magnets, and the field winding is located at the poles (2pEl). The article presents a synchronous generator with the number of pole pairs p = 6, where four pole pairs are excited with permanent magnets glued on the surface of the pole pieces, and two pole pairs are electromagnetically excited. In this way, the excitation power loss is reduced by 66%. The six-phase armature winding (2 x 3 phase) allows the generator’s rated power to increase by 3,4% and the power loss in the armature winding is reduced by the same amount. The generator in the case of off-gird work and changes of load power has the ability to stabilize the voltage, and when working on-grid it allows continuous regulation of reactive power. The excitation winding has a small copper mass, thus the power losses in the field winding are low.
Źródło:
Napędy i Sterowanie; 2021, 23, 4; 28-31
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An electrically-controlled axial-flux permanent magnetgenerator
Generator tarczowy z magnesami trwałymi z elektrycznie kontrolowanym wzbudzeniem
Autorzy:
Paplicki, Piotr
Prajzendanc, Paweł
Wardach, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/1841356.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
axial-flux machine
PM generator
hybrid excitation
flux-control
voltage regulation
maszyna tarczowa
generator z magnesami trwałymi
wzbudzenie hybrydowe
regulacja strumienia
regulacja napięcia
Opis:
The paper presents a design of an axial-flux surface-mounted permanent-magnet generator with flux-regulation capability. Based on three-dimensional finite-element analysis (3D-FEA), theno-load air-gap magnetic flux density, flux-control characteristics, cogging torque and electromagnetic torque of the machine have been predicted. Simulation results of no-load back-EMF waveforms performed at different DC control coil excitationshave been compared with experimental results.
W artykule przedstawiono projekt generatora tarczowego z powierzchniowo mocowanymi magnesami trwałymi z możliwością regulacjistrumienia wzbudzenia. Na podstawie trójwymiarowej analizy polowej metodą elementów skończonych (3D-MES) wyznaczono rozkład indukcji magnetycznej w szczelinie powietrznej, charakterystykę regulacji strumienia, moment zaczepowy oraz moment elektromagnetyczny maszyny. Symulowany przebieg napięcia indukowanego w uzwojeniach stojana w funkcji prądu DC dodatkowegouzwojenia wzbudzeniu maszyny porównano z wynikami eksperymentalnymi.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2020, 10, 4; 65-68
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An electrically-controlled axial-flux permanent magnetgenerator
Generator tarczowy z magnesami trwałymi z elektrycznie kontrolowanym wzbudzeniem
Autorzy:
Paplicki, Piotr
Prajzendanc, Paweł
Wardach, Marcin
Powiązania:
https://bibliotekanauki.pl/articles/1841379.pdf
Data publikacji:
2020
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
axial-flux machine
PM generator
hybrid excitation
flux-control
voltage regulation
maszyna tarczowa
generator z magnesami trwałymi
wzbudzenie hybrydowe
regulacja strumienia
regulacja napięcia
Opis:
The paper presents a design of an axial-flux surface-mounted permanent-magnet generator with flux-regulation capability. Based on three-dimensional finite-element analysis (3D-FEA), theno-load air-gap magnetic flux density, flux-control characteristics, cogging torque and electromagnetic torque of the machine have been predicted. Simulation results of no-load back-EMF waveforms performed at different DC control coil excitationshave been compared with experimental results.
W artykule przedstawiono projekt generatora tarczowego z powierzchniowo mocowanymi magnesami trwałymi z możliwością regulacjistrumienia wzbudzenia. Na podstawie trójwymiarowej analizy polowej metodą elementów skończonych (3D-MES) wyznaczono rozkład indukcji magnetycznej w szczelinie powietrznej, charakterystykę regulacji strumienia, moment zaczepowy oraz moment elektromagnetyczny maszyny. Symulowany przebieg napięcia indukowanego w uzwojeniach stojana w funkcji prądu DC dodatkowegouzwojenia wzbudzeniu maszyny porównano z wynikami eksperymentalnymi.
Źródło:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska; 2020, 10, 4; 65-68
2083-0157
2391-6761
Pojawia się w:
Informatyka, Automatyka, Pomiary w Gospodarce i Ochronie Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies