Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "environment contamination" wg kryterium: Temat


Tytuł:
Accumulation of elements in vegetation spontaneously developing on self-heating waste dumps in the Upper Silesia area (Poland)
Autorzy:
Wojewódka-Przybył, Marta
Stienss, Jacek
Kruszewski, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2201191.pdf
Data publikacji:
2022
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
toxic metals
burning heaps
environment contamination
coal
smelting waste
plant hyperaccumulation
element translocation
Opis:
Accumulation of 34 trace and major elements was analysed in 9 plant species (Tussilago farfara, Arctium tomentosum, Solidago canadensis, Populus L., Eupatorium cannabinum, Verbascum sp., Solanum nigrum, Rumex crispus L., Betula pendula) and one fungus (Schizophyllum commune) collected from coal, PbZn-smelting, and mixed-type waste heaps in Upper Silesia (Poland). The most persistent and extreme enrichment was found in the burnt bark of Betula pendula from Bytom. Enrichment factors in relation to the geometric mean of elevated (PE) and hyperaccumulator (PH) plant contents show extreme values for elements toxic to vegetation, such as Zn (EFPE up to 13, EFPH up to 17), Pb (EFPH up to 4, EFPE up to 161), Tl (EFPE up to 8), Cd (EFmax of 327), Hg (EFPH up to 3), and Ag (maximum EFPE of 14). Elevated are also V (EFPN up to 13), Sc (EFPN up to 14), Ni (EFPN up to 17), Se (EFPN up to 16), Fe (EFPN up to 48), Co (EFPN up to 23), Sb (EFPN up to 31), and Bi (EFPN up to 34). Although the levels of the elements studied were usually below potentially toxic levels, they were often above the normal ones. Furthermore, significant differences in the contents between different plant tissues were observed, as reflected in the translocation factor (TF). Verbascum sp. and S. nigrum accumulate such elements mostly in their above-ground tissues, and may thus be considered useful in phytoextraction of Zn, Pb and other elements. Sl. canadensis and E. cannabinum mostly display the opposite strategy, with element immobilization in their roots. Extreme Zn contents in E. cannabinum, peaking in its roots, suggest it to be a potential Zn phytostabilizer.
Źródło:
Geological Quarterly; 2022, 66, 3; art. no. 30
1641-7291
Pojawia się w:
Geological Quarterly
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An Innovative Process for Efficient Data Evaluation in an Atmospheric Geochemical Survey of Contaminated Soil
Autorzy:
Eskvarekova, Erika
Wittenberger, Gabriel
Senova, Andrea
Bakalar, Tomas
Harcarufka, Rastislav
Powiązania:
https://bibliotekanauki.pl/articles/1838054.pdf
Data publikacji:
2020
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
analyzer
soil contamination
data processing
Windows Power Shell
environment
geochemical survey
analizator
zanieczyszczenie gleby
przetwarzanie danych
środowisko
badania geochemiczne
Opis:
The article focuses on the field of innovative trends for efficient data processing in the conduct of research of organic soil pollution using a soil air analyzer for surveys of soil contamination in situ at industrial enterprises in Slovakia. The content of the article is a discourse of theoretical knowledge from the field of the geological environment; the authors’ own survey to monitor the processing and evaluation of the measured values obtained (e.g., CO2, CH4, NEL, BTEX). Currently, standard data processing procedures using the software that is supplied have basic or limited functionality, and the processing time is several hours, including manual and repetitive tasks. As we present in the article, the new Windows PowerShell tool is being used more efficiently, reducing the data processing time which represents an 86% time saving. There is currently no suitable or faster way of evaluating the measured data in Slovakia and the Czech Republic.
Źródło:
Civil and Environmental Engineering Reports; 2020, 30, 4; 173-187
2080-5187
2450-8594
Pojawia się w:
Civil and Environmental Engineering Reports
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zagrożenia dla środowiska gruntowo-wodnego na podstawie danych z erupcji wstępnej
Analysis of hazard of ground and water environment on the basis of primary blow-out data
Autorzy:
Dubiel, S.
Powiązania:
https://bibliotekanauki.pl/articles/300079.pdf
Data publikacji:
2009
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
erupcje z odwiertów naftowych
przewidywanie warunków złożowych
zanieczyszczenie środowiska gruntowo-wodnego ropą naftową
blow-outs in boreholes
predicted reservoir conditions
contamination of ground and water environment with oil
Opis:
W publikacji podano sposób określania gradientu ciśnienia złożowego oraz ciężaru właściwego płynu złożowego na podstawie danych z erupcji w fazie wstępnej. Zamieszczono odpowiednie materiały graficzne oraz przykłady liczbowe opracowane na podstawie danych przemysłowych. Przeanalizowano rodzaje zanieczyszczeń środowiska gruntowo-wodnego w przypadkach rozwiniętej erupcji ropy naftowej z otworu wiertniczego.
The way of determining reservoir pressure gradient and specific gravity of reservoir fluid on the basis of initial blow-out data are presented in the paper. Graphic materials and figure examples based on industrial data are given. Types of contaminations of ground and water environment in the case of ongoing blow-out.
Źródło:
Wiertnictwo, Nafta, Gaz; 2009, 26, 3; 495-505
1507-0042
Pojawia się w:
Wiertnictwo, Nafta, Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of mathematical modelling methods in the protection of groundwater environment
Zastosowanie metod modelowania matematycznego w ochronie środowiska wód podziemnych
Autorzy:
Ślesicki, M.
Powiązania:
https://bibliotekanauki.pl/articles/292960.pdf
Data publikacji:
2009
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
modelowanie matematyczne
ochrona środowiska
transport zanieczyszczeń
wody podziemne
contamination transport
environment protection
groundwater
mathematical modelling
Opis:
In the projects of protection of soil-water environment there is a need to combine and process large amount of information from various disciplines to estimate parameters of phenomena and to determine the range and time table of necessary undertakings. Due to complex assessment of processes taking place in aquifers, mathematical modeling is the best tool supporting evaluation off pollution in the ground water environment. It is also an effective method of forecasting the risk associated with the harmful impact of objects polluting grounds and grounds waters. Significant application of mathematical modeling is the use for the enlargement of information gathered in the process of recognition and assessment of condition that prevail in soil-water environment. Results of modeling, if appropriately presented, could be an important element of decision support system in environmental management. This paper describes procedures for developing an environmental remediation decision support system by linking CADD and GIS software with the hydro geological flow and transport models.
W projektach ochrony środowiska wód podziemnych konieczne jest stosowanie narzędzi umożliwiających łączenie i przetwarzanie znacznych ilości informacji pochodzących z różnych dziedzin, w celu oszacowania parametrów zjawisk oraz ustalenia zakresu i harmonogramu potrzebnych przedsięwzięć w tym zakresie. Modelowanie matematyczne dzięki kompleksowej ocenie procesów zachodzących w systemach wodonośnych jest najlepszym narzędziem wspomagającym w ocenie stopnia zanieczyszczenia środowiska wodno-gruntowego. Jest ono również skuteczną metodą prognozowania ryzyka, związanego ze szkodliwym oddziaływaniem obiektów zanieczyszczających grunty i wody podziemne. Istotnym zastosowaniem modelowania matematycznego jest jego wykorzystanie do poszerzenia zakresu dostępnej informacji gromadzonej w procesie rozpoznawania i oceny warunków panujących w środowisku gruntowo-wodnym. Wyniki modelowania, w odpowiednim ujęciu, mogą być istotnym składnikiem systemu wspomagania decyzji w zakresie zarządzania ochroną środowiska. W artykule przedstawiono procedurę tworzenia sytemu wspomagania decyzji w ochronie środowiska wód podziemnych bazującą na łącznym wykorzystaniu oprogramowania CADD, GIS oraz hydrogeologicznych modeli przepływu i transportu.
Źródło:
Journal of Water and Land Development; 2009, no. 13b; 31-39
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of average exhaust emissions from a farm tractor operating in a livestock building
Ocena sredniej emisji spalin z ciagnika pracujacego w budynku inwentarskim
Autorzy:
Karbowy, A.
Koniuszy, A.
Sedlak, P.
Powiązania:
https://bibliotekanauki.pl/articles/793309.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
livestock building
microclimate
engine load
exhaust emission
farm tractor
carbon dioxide emission
water vapour
environment
temperature
air contamination
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of heavy metal contamination of soils impacted by a zinc smelter activity
Autorzy:
Diatta, J B
Chudzinska, E.
Wirth, S.
Powiązania:
https://bibliotekanauki.pl/articles/14107.pdf
Data publikacji:
2008
Wydawca:
Uniwersytet Warmińsko-Mazurski w Olsztynie / Polskie Towarzystwo Magnezologiczne im. Prof. Juliana Aleksandrowicza
Tematy:
Miasteczko Slaskie Zinc Smelter zone
metallurgy
geoaccumulation index
cadmium
zinc
lead
metal contamination
soil contamination
copper
soil
environment protection
contamination factor
contamination degree
environment pollution
heavy metal
Opis:
Four metals (Cu, Zn, Pb and Cd) were assayed in soils within the impact zone of the Miasteczko Slaskie Zinc Smelter (southern Poland). The investigated area is afforested and has been subjected for a long time to intensive deposition of metal-bearing dusts. Soil pHKCl varied broadly from very acidic (pHKCl = 3.4) to slightly alkaline (pHKCl = 7.2). Organic carbon (Corg) content fluctuated within a large range, i.e., 5.5 - 66.4 g kg-1, whereas the cation exchange capacity (CEC) was in most cases markedly low (from 1.4 to 5.9 cmol(+)kg-1), with exception for two sites (C and D) exhibiting values of 26.8 and 15.1 cmol(+)kg-1, respectively. Total Zn, Pb and Cd contents exceeded manifold their respective levels in the Earth crust (reference value - RV)) as well as those suggested as background levels for Poland (BLP). The assessment of the contamination of soils by these metals was undertaken on the basis of geoaccumulation indices (lgeo), contamination factors Cl and degrees of contamination (Cdeg). The overall metal contamination represented practically two classes: low contamination for Cu; considerable to extreme contamination (in ascending order) for Zn, Cd, and Pb. The contribution (BLP-based assessment) of each metal to the degree of contamination index varied from 2.14 % (for Cu), via 26.33% (for Zn) to quite equally for Cd and Pb, both representing 35.22% and 36.32, respectively. It is worth pointing out that copper was the sole metal to threaten the least (Figure 1) the soils of the investigated ecosystem.
Źródło:
Journal of Elementology; 2008, 13, 1
1644-2296
Pojawia się w:
Journal of Elementology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania nad wielkością ziaren skrobi w różnych odmianach ziemniaka pod kątem możliwości zmniejszenia zanieczyszczenia środowiska wodnego odpadami produkcyjnymi
Research on size of starch grains in sifferent potato cultivars for the possibility of reduction of environment pollution with wastes from starch production
Autorzy:
Ratuszniak, E.
Kubas, A.
Powiązania:
https://bibliotekanauki.pl/articles/1819627.pdf
Data publikacji:
2010
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
ziarno skrobi
odmiany ziemniaków
środowisko wodne
zanieczyszczenie środowiska
grain starch
potato varieties
aquatic environment
contamination of the environment
Opis:
Przeprowadzone analizy wielkości ziaren skrobi w grupie badanych odmian metodą mikroskopową wykazały, że w skrobi wszystkich przebadanych odmian ziemniaka w latach 2006 i 2007, oraz w próbkach mąki ziemniaczanej, przeważała zdecydowanie frakcja ziaren średnich. 2. W grupie badanych odmian wysokim udziałem ziaren dużych skrobi wyróżniły się odmiany Saturna i Glada, u których w obu latach badań stwierdzono wysoki procentowy udział ziaren średnich i dużych. Ma to szczególne znaczenie w gorzelnictwie i krochmalnictwie, gdzie preferowane są duże ziarna skrobi, gwarantując wysoki uzysk skrobi w przerobie tych odmian. 3. Szczególnie wysoki procentowy udział frakcji ziaren małych stwierdzono w roku 2007 u odmian Syrena i Miłek (40% i 45%). Może to być sygnałem wskazującym na możliwe wysokie straty skrobi w procesie przerobu tych odmian, a tym samym znaczne obciążenie ścieków odpadami. 4. W roku 2007 odnotowano wyraźne różnice w udziale procentowym frakcji ziaren dużych i małych u tych samych odmian w porównaniu do roku 2006. Może to wskazywać na znaczną zmienność środowiskową tej cechy, związaną głównie ze zmianą warunków klimatycznych w poszczególnych latach uprawy. 5. Nowoczesne metody uzyskiwania skrobi pozwalają na wzrost udziału skrobi drobnoziarnistej w otrzymywanym produkcie, co jednak zmienia właściwości uzyskanej skrobi (właściwości cieplne, lepkość). Zwiększenie odzysku ziaren małych jest istotne dla zmniejszenia obciążenia wód odpadami.
The potato industry produces numerous wastes which can pollute water. In a modem starching factory the ratio of starch extraction from potatoes with high starch content is about 90-93%. The remainder of the starch goes into wastes. Starch potato breeding is based primarily on the percentage parameter of starch content and on the starch harvest per hectare. Less attention is paid to the size of starch grains, perhaps due to the lack of a fast and simple method of determination of that attribute. The aim of this paper is to apply microscopic analysis of the size of starch grains in various potato cultivars, its quota in different volume fractions, and an attempt to evaluate the researched cultivars in their capacity as raw material for starch production in relation to the possible water pollution in the production of starch. The research material consisted of tubers of 8 different potato cultivars belonging to different utility groups. The measurement of starch grains was carried out using a NIKON ECLIPSE E 400 microscope, with the aid of a computer analysis of microscope images program - LUCIA G 3.52a. The results were grouped into three fractions of grains - small (up to 20p.m), medium (20-40um) and large (above 40um).Microscopic analyses of the research material allowed to divide starch into size-based fractions and to indicate the differences in the percentage presence of the various fractions in different cultivars of potatoes. There was a marked difference in the percentage presence of small and large sized grains in the same cultivars between the years 2007 and 2006. This could indicate that the feature could have a considerable environmental dependency, depending on the variability of climate in the particular years. Two of the examined cultivars - Saturn and Glada - had particularly high presence of large grains, thus guaranteeing high starch yields in the processing of these particular cultivars. Two of the examined cultivars - Syrena and Miłek - had a high presence of the small grain strata in the year 2007 (40 and 45% respectively). These cultivars could cause high starch loss in the production process as well as add considerable amount of wastes to refuse water. Modern starch extraction techniques allow for an increase of the small grain starch presence in the ready product. The improvement in small grain extraction is important for decreasing of pollution of water with wastes.
Źródło:
Rocznik Ochrona Środowiska; 2010, Tom 12; 409-418
1506-218X
Pojawia się w:
Rocznik Ochrona Środowiska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badanie zanieczyszczenia metalami ciężkimi i radionuklidami zwałowisk odpadów odlewniczych w Ozimku oraz ich wpływu na stan okolicznych gleb
The influence of waste products from steel foundry dump on heavy metals and radionuclides contaminations in local soils
Autorzy:
Bożym, M.
Staszak, D.
Majcherczyk, T.
Powiązania:
https://bibliotekanauki.pl/articles/392416.pdf
Data publikacji:
2009
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
odpad przemysłowy
odlewnictwo żelaza
składowisko odpadów odlewniczych
wpływ na środowisko
metal ciężki
pierwiastek promieniotwórczy
zanieczyszczenie gleby
industrial waste
metallurgy
steel foundry dump
impact on environment
heavy metal
radionuclide
soil contamination
Opis:
Celem pracy było określenie wpływu pylenia z hałd zawierających odpady odlewnicze na zanieczyszczenie okolicznych gleb metalami ciężkimi i radionuklidami. Przedstawiono wyniki badań dwóch składowisk odpadów produkcyjnych byłej Huty "Małapanew" S.A. oraz gleb znajdujących się w różnej odległości od tych składowisk. Próbki odpadów i gleb zbierano w lipcu 2004 r., a następnie poddawano analizom fizykochemicznym. W próbkach oznaczono skład granulometryczny, pH, zawartooeć węgla organicznego i próchnicy, zawartośeć makroelementów (N, P, K, Ca, Mg), metali ciężkich (Zn, Cu, Cd, Pb, Ni i Cr) oraz aktywność radionuklidów w odpadach i glebach. Badane gleby należały do gleb lekkich o odczynie kwaśnym, średnio zasobnych w makroelementy. Odpady składały się głównie z piasków. Zawartość próchnicy i makroelementów (NPK) była relatywnie niższa niż w glebach. Zawartość Mg i Ca przewyższała ich stężenie w glebach. Badane gleby nie były skażone metalami ciężkimi i radionuklidami (z wyjątkiem Cd i 137Cs). Zawartość metali ciężkich, z wyjątkiem Ni i Cr oraz radionuklidów, z wyjątkiem 137Cs i 40K, była zbliżona w odpadzie i glebach. Nie wykazano wpływu odpadów z hałd na zanieczyszczenie metalami ciężkimi i radionuklidami okolicznych gleb.
The aim of this study was to determine the influence of dusting of waste products from steel foundry dump on metals and radionuclides contaminations in local soils. The work presents results of research of two waste products from steel foundry dump of "Małapanew" Co. steel foundry plant and soils situated in different distance from those storage yards. Waste and soils samples was collected in July 2004. In samples granulometric composition, pH, organic carbon and humus content, macronutrients (N, P, K, Ca, Mg), heavy metals (Zn, Cu, Cd, Pb, Ni i Cr) concentrations and radionuclides activity in wastes and soils were analysed. Light, acidic soils were inter-rich in macronutrients. Wastes mainly were consist of sand. Humus and macronutrients (NPK) content was relatively low than in soils, but Mg and Ca content was higher. Analysed soils were not contaminated with heavy metals and radionuclides (except respectively Cd i 137Cs). The heavy metals concentration, except Ni and Cr, and radionuclides activities, except 137Cs i 40K, was on the same level in wastes and soils. The influence of waste products in storage yards on metal and radionuclides contaminations in neighbouring soils was not researched.
Źródło:
Prace Instytutu Szkła, Ceramiki, Materiałów Ogniotrwałych i Budowlanych; 2009, R. 2, nr 4, 4; 107-121
1899-3230
Pojawia się w:
Prace Instytutu Szkła, Ceramiki, Materiałów Ogniotrwałych i Budowlanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Concentrations and profiles of brominated diphenyl ethers (BDEs) in Baltic and Atlantic herring
Autorzy:
Roots, O.
Zitko, V.
Kiviranta, H.
Rantakokko, P.
Ruokojarvi, P.
Powiązania:
https://bibliotekanauki.pl/articles/48918.pdf
Data publikacji:
2009
Wydawca:
Polska Akademia Nauk. Instytut Oceanologii PAN
Tematy:
Atlantic herring
Baltic Sea
Baltic herring
aquatic biota
brominated diphenyl ether
contamination
fish
hazardous substance
herring
marine environment
marine organism
pollution
weight
Opis:
The total concentrations of BDEs in Baltic herring, caught in different years (2002–08) from various areas of the Baltic, and in Atlantic herring (2006) can be reasonably well described by a single concentration vs weight relationship. Samples collected a few years earlier and analysed by others show a slightly different relationship. This indicates that the weight of the fish is an important factor determining the level of contamination and that the contamination apparently did not increase between 1999 and 2008. However, two Baltic herring samples collected in 2007 contained, for reasons unknown, very high concentrations of BDE 209. The BDE profiles (concentrations scaled to a sum of 100) varied a great deal. It is impossible to determine how much of this variation is real and how much is caused by errors in the analyses. The concentration of the BDE 75 was much higher in the Atlantic than in the Baltic herring. Even after taking this into consideration, however, the BDE profile in Atlantic herring is different from the BDE profiles in Baltic herring.
Źródło:
Oceanologia; 2009, 51, 4
0078-3234
Pojawia się w:
Oceanologia
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cost-effective approach to lung cancer risk for a radiological dispersal device (RDD) scenario
Autorzy:
Costa, Karolina P. S.
Lima, Sergio X.
Brum, Tercio
Lima, Zelmo R.
Amorim, Jose C. C.
Healy, Matthew J. F.
Vital, Helio C.
Prah, Matjaž
Andrade, Edson R.
Powiązania:
https://bibliotekanauki.pl/articles/146560.pdf
Data publikacji:
2019
Wydawca:
Instytut Chemii i Techniki Jądrowej
Tematy:
environment
contamination
radiation
cost-effectiveness
risk
Opis:
A release of radioactive material into the environment can lead to hazardous exposure of the population and serious future concerns about health issues such as an increased incidence of cancer. In this context, a practical methodology capable of providing useful basic information from the scenario can be valuable for immediate decisions and future risk assessment. For this work, the simulation of a radiological dispersal device (RDD) filled with americium-241 was considered. The radiation dose simulated by the HotSpot code was used as an input to the epidemiological equations from BEIR V producing the data used to assess the risk of lung cancer development. The methodology could be useful in providing training for responders aimed to the initial support addressed to decision-making for emergency response at the early phase of an RDD scenario. The results from the simulation allow estimating (a) the size of the potentially affected population, (b) the type of protection action considering gender and location of the individuals, (c) the absorbed doses, (d) the matrix of lung cancer incidence predictions over a period of 5 years, and (e) the cost-effectiveness in the initial decision environment.
Źródło:
Nukleonika; 2019, 64, 4; 123-129
0029-5922
1508-5791
Pojawia się w:
Nukleonika
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Endotoxins and beta-glucans as markers of microbiological contamination - characteristics, detection, and environmental exposure
Autorzy:
Lawniczek-Walczyk, A
Gorny, R.L.
Powiązania:
https://bibliotekanauki.pl/articles/49660.pdf
Data publikacji:
2010
Wydawca:
Instytut Medycyny Wsi
Tematy:
environmental exposure
endotoxin
beta-glucan
structure
biological activity
detection
microbiological contamination
environment pollution
hygienic standard
standard
Polish standard
occupational exposure
Źródło:
Annals of Agricultural and Environmental Medicine; 2010, 17, 2; 193-208
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of Dominant Microbial Air Pollutants in Hospital Environments and Nearby Areas in Albania
Autorzy:
Troja, Erjon
Ceci, Ranela
Markaj, Albana
Dhamo, Eltion
Troja, Rozana
Powiązania:
https://bibliotekanauki.pl/articles/1838419.pdf
Data publikacji:
2021
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
microbial contamination
air quality
hospital environment
Tirana
Albania
Opis:
Nowadays, one of the most important and essential aspects of having a healthy and safe life is the air safety and its quality in indoor and outdoor environments. In the air, there are not only chemical pollutants but also biological ones, with specific impacts. Hospital environments are among the most likely to be affected by the microbiological contamination of the air; therefore its quality is particularly important. Pathogenic microorganisms, which may be present in the air, can cause nosocomial infections in hospitalized patients, with compromised immune system or other medical conditions. This paper reflects the evaluation of microbiological air contamination, in different hospital environments and nearby areas, in the city of Tirana. The microbial air quality has been monitored during the period of 2009–2018, performing evaluations every three years, in the same area and the same time of the year. In order to build a database for understanding the impact of developmental changes on the air microbiological loads, results of similar studies conducted earlier, during 2007 and 2008 were also taken into consideration. The above-mentioned period was selected because of the changes in the infrastructure and indoor environments of the monitored area, where many patients have been treated for years. Changes have been made over the years to hospital structures and surroundings, including recreational facilities, clinical service units, as well as main and connecting roads, etc. The obtained results, which were compared over the years, provided a clear view of the changing microbiological air loads, influenced by the improvements of indoor and outdoor areas. The morphological studies of the observed, isolated, purified and identified microorganisms revealed the presence of specific mold loads, with the dominance of the species of Aspergillus genus and those of the group Fungi imperfecti. Over the years, a decrease in the total number was observed (from 103 to 101), together with a smaller number of bacteria (1012), in the monitored environments.
Źródło:
Journal of Ecological Engineering; 2021, 22, 5; 32-38
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exposure assessment of airborne contaminants in the indoor environment of Irish swine farms
Autorzy:
Mc, Donnell P E
Coggins, M.A.
Hogan, V.J.
Fleming, G.T.
Powiązania:
https://bibliotekanauki.pl/articles/51964.pdf
Data publikacji:
2008
Wydawca:
Instytut Medycyny Wsi
Tematy:
carbon dioxide
farm worker
occupational exposure
indoor environment
ammonia
pig farm
Ireland
air contaminant
agricultural worker
air contamination
endotoxin
Źródło:
Annals of Agricultural and Environmental Medicine; 2008, 15, 2
1232-1966
Pojawia się w:
Annals of Agricultural and Environmental Medicine
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exposure assessment of pharmaceutical powders based on an environmental monitoring method: a pilot study
Autorzy:
Demircan Yildirim, Fatma
Ekmekci, Ismail
Powiązania:
https://bibliotekanauki.pl/articles/2087446.pdf
Data publikacji:
2020-12-03
Wydawca:
Instytut Medycyny Pracy im. prof. dra Jerzego Nofera w Łodzi
Tematy:
environmental monitoring
occupational safety in the pharmaceutical industry
risk assessment
working environment measurement
exposure to API
determination of surface contamination
Opis:
BackgroundAbout 8 million healthcare workers in the USA are potentially exposed to hazardous drugs or their toxic metabolites over a long period of time despite the fact that both the Occupational Safety and Health Administration and the European Parliament recommend the monitoring of exposure among workers dealing with substances which have carcinogenic, mutagenic or toxic effects on the reproductive system. The objective of this study is to determine exposure to active pharmaceutical ingredients (APIs) among pharmaceutical industry workers, and to develop a methodology which promotes the accurate monitoring, evaluation and control of exposure to active pharmaceutical ingredients, also in compliance with good manufacturing practice.Material and MethodsThe pilot study was designed in accordance with “Sterile Drug Products Produced by Aseptic Processing – Current Good Manufacturing Practice,” issued by the U.S. Food and Drug Administration. The samples were collected with the swab technique which was recommended in the “Validation of Cleaning Processes (7/93)” guideline. The minimum numbers of locations (NL = 9) and sampling points (NL(T) = 63) were determined according to ISO 14644-1:2015 “Cleanrooms and Associated Controlled Environments” issued by the International Organization for Standardization. The samples were analyzed using an ultra performance liquid chromatography system, with an analytical method which was developed and validated according to “Q7A, Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients” issued by the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use. The low limit of quantification of the employed method (17 ng/ml) enables the determination of exposure at low concentrations.ResultsWhile contamination was detected in 43 (68.3%) of the 63 samples collected, 20 (31.7%) could not be detected. The environmental monitoring results ranged 0–15 000 ng/cm2 and the potential risk of exposure to API was considered to be >2 g.ConclusionsThe results clearly prove and reveal the magnitude of the hazard, both objectively and scientifically, when compared to the research which suggests that 10 ng/cm2 should be considered the prohibitory risk level in quantitative terms.
Źródło:
Medycyna Pracy; 2020, 71, 6; 649-663
0465-5893
2353-1339
Pojawia się w:
Medycyna Pracy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fingerprinting niskolotnych frakcji i produktów naftowych techniką cienkowarstwowej chromatografii cieczowej (TLC) w identyfikacji przecieków procesowych oraz skażenia środowiska
Fingerprint comparison of low-volatile petroleum products by means of Thin Layer Chromatography (TLC) for identification of process leakages and environmental pollution
Autorzy:
Kosińska, J.
Boczkaj, G.
Gudebska, J.
Kamiński, M.
Powiązania:
https://bibliotekanauki.pl/articles/92273.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Przyrodniczo-Humanistyczny w Siedlcach
Tematy:
chromatografia cienkowarstwowa (TLC)
niskolotne produkty naftowe
nieszczelności instalacji procesowych
przecieki do wód procesowych
identyfikacja źródła przecieku
skażenie środowiska naturalnego
identyfikacja źródła skażenia
thin layer chromatography TLC
low volatile petroleum products
identification of pollution source
contamination of natural environment
identification of the source of contamination
Opis:
Podczas eksploatacji instalacji technologicznych może dochodzić do rozszczelnień prowadzących do przecieków, tak, zanieczyszczeń wód procesowych, jak i wzajemnego zanieczyszczania strumieni procesowych. Tego typu zakłócenia mają miejsce przede wszystkim w przypadku wymienników ciepła, gdzie strumienie wsadów lub wód chłodzących odbierają ciepło od strumieni procesowych. Pojawienie się tam nieszczelności prowadzi do zanieczyszczania strumieni procesowych wodą, lub wód procesowych składnikami strumieni procesowych, albo wzajemnej kontaminacji strumieni procesowych. To najczęściej czyni produkt naftowy nieprzydatny użytkowo, albo znacznie utrudnia, lub uniemożliwia recyrkulację wód procesowych. Następuje konieczność zatrzymania odpowiedniej instalacji, znalezienia miejsca nieszczelności i jej usunięcia. W przypadku złożonej konfiguracji instalacji i krzyżowania się wielu strumieni procesowych ustalenie lokalizacji nieszczelności jest niezwykle trudne. Jednocześnie, w przypadku stwierdzenia nieszczelności, konieczne jest szybkie ustalenie jej miejsca. Zastosowanie do tego celu znajdują głównie techniki i metodyki analityki technicznej o niskiej czasochłonności i znacznej prostocie wykonania. Najważniejsza jest identyfikacja źródła zanieczyszczenia, a dokładne określenie stężenia ma znaczenie drugorzędne. W pracy zbadano możliwość zastosowania stosunkowo prostej i szybkiej procedury przygotowania próbki, rozdzielania grup składników techniką cienkowarstwowej chromatografii ciecz owej (TLC), wizualizacji w świetle UV 254 oraz 360 nm i analizy porównawczej cech plamek na płytkach TLC do określenia rodzaju niskolotnego materiału ropopochodnego stanowiącego zanieczyszczenie wód procesowych, lub wyciek z instalacji w rafinerii ropy naftowej. Procedura obejmuje odwadnianie próbek i kilkuetapowe rozwijanie chromatogramów cienkowarstwowych materiału stanowiącego przeciek oraz materiałów podejrzanych o jego istotę, wykonywane raz w kierunku rosnącej oraz po raz drugi - malejącej siły elucyjnej eluentu. Wizualne porównywanie w świetle UV barwy, kształtu, a także wielkości plamek, po dozowaniu i po każdym etapie elucji pozwala na bardzo wysoce prawdopodobną identyfikację źródła przeciek u, lub skażenia środowisk a. W wynik u badań stwierdzono, że metodyka ta pozwala w praktyce na uzyskanie wysokiego stopnia pewności co do identyfikacji zanieczyszczenia i wskazania materiału porównawczego będącego jego źródłem. Skuteczność metodyk i potwierdzono w zastosowaniu do źródła skażenia wód technologicznych w rafinerii ropy naftowej, a także w przypadku skażenia środowiska naturalnego nisko lotnymi produktami naftowymi. Opisano sposób wykonania poszczególnych etapów badania oraz warunki, jakie muszą zostać spełnione aby efektywność identyfikacji była jak najwyższa. W konsekwencji, zaproponowana metodyk a może być także bardzo przydatna dla identyfikacji źródła zanieczyszczenia środowiska naturalnego niskolotnymi naftowymi strumieniami, lub produktami naftowymi, tak wód, jak gleb i osadów dennych, szczególnie jeżeli dysponujemy materiałem porównawczym.
During the operation of the process installations an unsealing can occur leading to both contamination of process waters and cross-contamination of process streams. This type of interference can occur mainly in the heat exchangers, where the batch streams or cooling waters streams withdraw the heat from the process streams. The appearance of leakage leads to the contamination: of process streams by water, or process waters by the proces streams components, or cross-contamination of process streams. Most often, this causes the total unsuitability of the petroleum product, or greatly hinders process waters recirculation or even makes it impossible. As an effect of the leakage it is necessary to stop the work of given installation, find the place responsible for the leakage and repair it. In the case of complex configuration of installation and the crossing of multiple process streams the determination of the leakage location is extremely difficult. Simultaneously, in the case of leakage presence, a quick repair of its source is needed. For this purpose mainly a low time-consuming techniques and methodologies, favorably characterized also by high simplicity, are used. The most important is to identify the source of contamination, while the precise quantification of the contaminant concentration has minor significance. The work relates to the possibility of using a relativel y simple and fast procedure for sample preparation, separation of group components by means of thin-layer liquid chromatography (TLC), visualization in UV light at 254 and 360 nm, and a comparative analysis of spots on TLC plates to determine the type of low volatile petroleum material being a component of process water or a leakage from the oil refinery installation. The proposed procedure includes dehydration of samples and development of multi -step elution of the sample from the leakage, as well as, the samples of materials suspected to be a source of this leakage, carried out towards increasing and then decreasing elution strength of the eluent. The comparison of obtained TLC chromatograms in UV light included the comparison of the shape, size, position, and color of spots after placing all spots of tested samples on TLC plates and after each elution step. This leads to very high degree of certainty with reference to identification of the leakage source or environment pollution source. The results of proposed study allowed for drawing the conclusion that the presented methodology allows for obtaining a high degree of certainty with reference to identification of the pollution (leakage) and indication of material being the source of this pollution. The effectiveness of the methodology was confirmed by applying it to identification procedure of the contamination source of process water in oil refinery, as well as, in the case of environmental pollution by low-volatile petroleum products. The paper also includes the exact description of respective procedure’s steps and the conditions which have to be fulfilled to achieve the highest possible efficiency of the identification. Consequently, the proposed methodology can also be very useful for identifying the source of environmental pollution – both water, soil and sediments pollution (especially if we have comparative material) – by low-volatile petroleum streams or petroleum products.
Źródło:
Camera Separatoria; 2013, 5, 2; 56-69
2083-6392
2299-6265
Pojawia się w:
Camera Separatoria
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies