Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "engine condition" wg kryterium: Temat


Tytuł:
Researches of the dynamic characteristics of the turbine jet engine in flight based on its ground tests
Autorzy:
Golak, K.
Lindstedt, P.
Grądzki, R.
Powiązania:
https://bibliotekanauki.pl/articles/247300.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
jet engine
adjustment
ground tests
engine condition
aircraft engine maintenance
Opis:
Turbine jet engines maintenance (adjustment) actions are performed during standard ground tests, but they are used during the flight. It turns out that the characteristics of the engine determined during the ground tests from the input value "w" introduced by the engine control lever DSS are significantly different from those obtained from disturbance “z" operating in the engine during the aircraft flight. It is noticed, that improvement of the engine control state made by mechanic during aircraft ground tests may cause the deterioration of the engine performance, which is felt by the pilot. The article presents a method that allows determining the basic characteristics of the engine in flight based only on the signals measured during testing ground. This method is based on measurement the major engine signals n – engine rpm, p4 – turbine discharge total pressure, p2 – low pressure compressor inlet, mp – fuel usage, then the designation of synthetic signals y=n/p4 (which describes the engine output), u=mp/p2 (describes engine input) and further their own and cross correlation function. Next, the power spectral density functions of these synthetic signals were calculated. Power spectral density functions is a basis to determine the spectral transfer function HW(jω) (during the ground tests) and HZ(jω) (in flight) which are the basis to determine the characteristics (step response) of the turbine jet engine in flight and during ground tests.
Źródło:
Journal of KONES; 2016, 23, 3; 151-156
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aviation piston engines on-condition maintenance – proposal
Eksploatacja lotniczych silników tłokowych według stanu technicznego – propozycja
Autorzy:
Głowacki, P.
Łukasik, B.
Powiązania:
https://bibliotekanauki.pl/articles/133803.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
on-condition maintenance
piston engine
engine condition monitoring
eksploatacja według stanu technicznego
silnik tłokowy
monitorowanie stanu technicznego silnika
Opis:
The article presents a proposal of the established in the institute of aviation program and tools that are to enable General aviation operators in our country to perform on-condition maintenance of piston engines. Program apart from the existing (strictly supervised) Engine Manual tasks, introduces new mandatory maintenance activities such as: monitoring of engine parameters during cruise and climb, with determination of their diagnostic tolerance limits (never been performed in the maintenance practice), oil spectrographic analysis, also with determination of tolerances and oil particle size monitoring. The article shows results of half year long monitored exploitations of Continental IO-240-B engines installed on Diamond Da20-C1 „Katana” aircraft.
Artykuł prezentuje opracowaną w Instytucie Lotnictwa koncepcję umożliwiającą operatorom lotnictwa ogólnego w Polsce eksploatację lotniczych silników tłokowych według stanu technicznego. Program obsługi, oprócz ściśle monitorowanych obowiązujących już czynności obsługowych wprowadza nowe, jak: zapis i monitorowanie parametrów pracy silnika podczas wznoszenia i lotu poziomego z wyznaczeniem ich granic tolerancji diagnostycznej, analizę spektrograficzną oleju silnikowego z wyznaczeniem dopuszczalnych wielkości zawartości charakterystycznych pierwiastków i monitorowanie wielkości opiłków ferromagnetycznych. W artykule przedstawiono rezultaty nadzorowanej półrocznej eksploatacji silników IO-240-B firmy Continental zainstalowanych na samolotach Diamond Da20-C1 „Katana”.
Źródło:
Combustion Engines; 2015, 54, 3; 52-63
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of diesel engines thermal condition on fuel consumption and smoke of exhaust gases
Autorzy:
Pukalskas, S.
Pikunas, A.
Bureika, G.
Powiązania:
https://bibliotekanauki.pl/articles/245614.pdf
Data publikacji:
2009
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diesel engines fuel consumption
engine's thermal condition
temperature of engine's cooling liquid
smoke in exhaust
Opis:
The number of vehicles in the world is growing rapidly. Therefore, the global consumption of crude oil is increasing and its natural resources are being depleted. It causes the rise of oil fuel cost. Constantly rising energy prices and emironmental concerns have made energy saving the highest priority for transportation operators. The main goal of vehicles' operation is economy. The fuel consumption of the most popular internal combustion engines depends on various factors, and one of the most important of them is thermal condition. Energy or fuel saving is the main way to reduce operational expenses of vehicles. This paper aims to investigate fuel consumption of 1.9 liter volume direct injection diesel engine and to construct a diagram of the dependence of the amount of smoke in exhaust on the temperature of engine's operation. The temperature was fixed in the engine's crankcase, while the temperature of cooling liquid was measured at four points as well as during the engine's bench testing. Unexpected test results are obtained: when the temperature of exhaust gases rises above 70-75 °C, the amount of smoke increases by a few times. Finally, basic conclusions and recommendations are given.
Źródło:
Journal of KONES; 2009, 16, 3; 319-324
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Application of visual test methods loaded elements of rotating machinery flow to assess their condition
Zastosowanie wizyjnych metod badań obciążonych elementów wirnikowych maszyn przepływowych do oceny ich stanu technicznego
Autorzy:
Warczek, J.
Juzuń, M.
Powiązania:
https://bibliotekanauki.pl/articles/198416.pdf
Data publikacji:
2016
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
non-destructive tests
aircraft engine diagnostics
condition of aircraft engine assess
badania nieniszczące
diagnostyka silników lotniczych
oszacowanie stanu technicznego silnika lotniczego
Opis:
The article presents the aims and objectives of the process of non-destructive testing of turbine aircraft engines using visual methods indirect use of endoscopy. Presents brief characteristics of the construction of engines tested, analyzed the diagnostic procedures used in non-destructive testing methods are shown diagnostic equipment used in research. The paper presents examples of the results of diagnostic checks obtained for the test aircraft engine.
W artykule przedstawiono cele i założenia procesu badań nieniszczących lotniczych silników turbinowych przy użyciu metod wizualnych pośrednich, z wykorzystaniem endoskopii. Przedstawiono krótkie charakterystyki budowy badanych silników, przeanalizowano procedury diagnostyczne, wykorzystywane w metodach badań nieniszczących, przedstawiono sprzęt diagnostyczny wykorzystany w badaniach. W artykule przedstawiono przykładowe wyniki sprawdzeń diagnostycznych, uzyskane dla badanego silnika lotniczego.
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2016, 90; 195-204
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Aviation piston engines : flight parameter analysis
Autorzy:
Boguszewicz, P.
Glowacki, P.
Powiązania:
https://bibliotekanauki.pl/articles/245160.pdf
Data publikacji:
2016
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
aviation piston engine
on-condition maintenance
engine flight parameter
Opis:
A program and tools enabling general aviation operators in our country the exploitation of the piston engines oncondition has been developed in the Institute of Aviation. Apart from the existing and strictly supervised engine manuals tasks, the program introduces, among other things, new maintenance mandatory activities like engine parameter monitoring during cruise and climb and a way of assignation diagnostic tolerance limits for them. That has never been performed in the aviation piston engines maintenance practice. In order to improve such analysis a flight data recorder (FDR) EDM 900 has been installed on the DA20- C1 „Katana” aircraft equipped with IO-240-B engine, which will allow elimination of the pilot's read errors and examination of the changes in the parameters during the entire flight. This will enable estimating if at a certain time of the flight a specified engine parameter is not exceeding the permissible values. Parameters from cruise have to be recorded in the similar range of the engine rpm’s. The parameters are oil pressure, oil temperature, cylinder head temperature, EGT, fuel flow, outside air temperature, rpm and altitude. Lower and upper acceptable limit values should be set, in which they can be contained throughout engine life. Engineers should also observe the trend of their changes. This article shows results of the aviation piston engine parameters analysis taken from FDR for ground runs, take-offs and cruise flight phases.
Źródło:
Journal of KONES; 2016, 23, 3; 41-48
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Method of building a model of operational changes for the marine combustion engine describing the impact of the damages of this engine on the characteristics of its operation process
Autorzy:
Landowski, B.
Pająk, M.
Żółtowski, B.
Muślewski, Ł.
Powiązania:
https://bibliotekanauki.pl/articles/258818.pdf
Data publikacji:
2017
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
process of operation
stochastic process
compression ignition engine
condition of object
operating condition
Opis:
This article deals with the modeling of the processes of operating both marine main and auxiliary engines. The paper presents a model of changes in operating conditions of ship’s internal combustion engine. The semi-Markov decision process was used to mathematically describe the process model of the engine. The developed model describes the effect of engine damage on the characteristics of its operation. A change in the input parameters of the model can simulate the influence of internal and external factors on the course of the analyzed process. A simplified calculation example is also presented for illustration purposes. The presented method together with developed algorithms and IT tools can be used to solve a wide range of problems related to the operation of marine main engines and other marine equipment as well as maritime and port facilities. This concerns primarily the economic, risk management and operational security issues of complex technical systems, as well as the readiness and reliability analysis of technical facilities.
Źródło:
Polish Maritime Research; 2017, 4; 67-76
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Przesłanki kompleksowej parametrycznej oceny stanu regulacji turbinowego silnika odrzutowego
Rationale for a comprehensive parametric assessment of turbojet engine adjustment
Autorzy:
Lindstedt, P.
Golak, K.
Powiązania:
https://bibliotekanauki.pl/articles/386695.pdf
Data publikacji:
2011
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
silnik odrzutowy
ocena
stan techniczny
turbojet engine
evaluation
technical condition
Opis:
W artykule przedstawiono podstawy nowej metody oceny stanu technicznego silników odrzutowych Model w postaci czterech transmitancji został zredukowany do jednego kompleksowego modelu o takiej pożądanej właściwości, że jakość działania silnika wyznaczona podczas prób naziemnych będzie też dostarczać wymaganą wiedzę o jego jakości w locie. Model ten wiąże w sposób syntetyczny wejście silnika (sygnały i ) z wyjściem silnika (n i ). Można wyznaczyć teoretyczne wzorcowe modele silnika i ich parametry, a następnie porównywać parametry modelu wzorcowego z parametrami modelu eksperymentu (próby naziemnej) i w ten sposób badać zmiany występujące w silniku podczas jego eksploatacji.
The article presents the basis of a new method of evaluation of technical condition of turbojet engine. The model in the form of four transmittances has been reduced to a single comprehensive model witch that properties, that the operating quality of the engine determined during ground testing will also provide the required knowledge about its quality in flight. This model involves in a synthetic way the engine input (signals and ) with the output of the engine ( and ). The theoretical models of the engine and their parameters can be designated, and then compared with the parameters of the model obtained during the experiment (ground tests) and thus allows to explore the changes occurring in the engine during its operation.
Źródło:
Acta Mechanica et Automatica; 2011, 5, 3; 73-77
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of drive parameters and technical condition on the vibroactivity of devices with single-cylinder internal combustion engines
Wpływ parametrów napędu i stanu technicznego na wibroaktywność urządzeń z jednocylindrowymi silnikami spalinowymi
Autorzy:
Figlus, T.
Wilk, A.
Krajzel, K.
Powiązania:
https://bibliotekanauki.pl/articles/374405.pdf
Data publikacji:
2013
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
noise
combustion engine
technical condition
hałas
silnik spalinowy
stan techniczny
Opis:
The study presents the important issue of the noise emission, generated by single-cylinder internal combustion engine constructions. This type of engine is used in drives of different types of machines and devices, including transport machines. In the study, the measurements and results analysis were conducted, which aim was to estimate the influence of the engine capacity, their power and the change of the technical condition on the generated noise. The researches of exemplary lawnmowers, equipped in this type of drive, showed the reduction of the sound level, together with the increase of the engines capacity and power decrease, and the increase of the noise (a few decibels) caused by the change of the technical condition during the operation.
Artykuł przedstawia ważny problem emisji hałasu generowanego przez urządzenia wyposażone w jednocylindrowe silniki spalinowe. Ten rodzaj silników stosowany jest do napędu różnego typu maszyn i urządzeń, w tym także maszyn transportowych. W artykule przeprowadzono pomiary i analizy wyników, których celem była ocena wpływu objętości skokowej silników spalinowych, ich mocy oraz zmiany stanu technicznego na poziom generowanego hałasu. Badania przykładowych kosiarek do koszenia trawy, wyposażonych w ten typ napędu, wykazały zmniejszanie poziomu dźwięku wraz ze wzrostem objętości skokowej silników i spadkiem ich mocy oraz kilkudecybelowy wzrost hałasu spowodowany zmianą stanu technicznego podczas eksploatacji.
Źródło:
Transport Problems; 2013, 8, 1; 79-85
1896-0596
2300-861X
Pojawia się w:
Transport Problems
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Characteristic load states of a tractor engine under farm operating conditions
Charakterystyczne stany obciazen silnika ciagnikowego eksploatowanego w warunkach gospodarstwa rolnego
Autorzy:
Sedlak, P.
Koniuszy, A.
Stawicki, T.
Powiązania:
https://bibliotekanauki.pl/articles/792306.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
farm tractor
tractor engine
load status
operating condition
combustion engine
U 912 tractor
farm
Lubuskie province
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Internal combustion engine diagnostics using statistically processed Wiebe function
Autorzy:
Famfulik, Jan
Richtar, Michal
Smiraus, Jakub
Muckova, Petra
Sarkan, Branislav
Dresler, Pavel
Powiązania:
https://bibliotekanauki.pl/articles/2038118.pdf
Data publikacji:
2021
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
automotive engineering
engine diagnostics
Wiebe function
parameters estimation
statistics
technical condition
Opis:
The aim of the article is to present the concept of an indirect diagnostic method using the assessment of the variability of the amount of released heat (mass fraction burn) and the heat release rate. The Wiebe function for the assessment of variability has been used. The Wiebe function parameters from the course of the high-pressure indication in the cylinder of internal combustion engine using linear regression have been calculated. From a sufficiently large number of measured samples, the upper and lower limits of the Wiebe function parameters have been statistically determined. Lower and upper limits characterize variability of the heat release process not only in terms of quantity but also in terms of heat release rate. The assessment of variability is thus more complicated than using one integral indicator, typically the mean value of amount of the released heat. The procedure enabling a more accurate estimation of heat generation beginning has been shown. For the combustion process variability assessment of the engine, statistical test of relative frequencies has been used.
Źródło:
Eksploatacja i Niezawodność; 2021, 23, 3; 505-511
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Damages to turbine engine components
Autorzy:
Laskowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/197404.pdf
Data publikacji:
2017
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
turbine engine damage
condition deterioration dent
nick
uszkodzenie silnika turbiny
nacięcie
Opis:
This article defines the typical damage to components of turbine engines, highlighting the differences between them and indicating possible causes. The distinction between various types of defects helps to explain the occurrence and supports personnel in defining the most suitable maintenance action to be performed. The defects described below are common in high-airflow turbine aviation engines on commercial and cargo aircrafts
Źródło:
Zeszyty Naukowe. Transport / Politechnika Śląska; 2017, 94; 111-121
0209-3324
2450-1549
Pojawia się w:
Zeszyty Naukowe. Transport / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza sprawności systemów oczyszczania spalin silników ZI na podstawie okresowych badań technicznych
The analysis of efficiency vehicle’s after treatments systems on the basis of annual technical inspection
Autorzy:
Lewkowicz, R.
Piątkowski, P.
Ściegienka, R.
Powiązania:
https://bibliotekanauki.pl/articles/133859.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
silnik spalinowy
oczyszczanie spalin
stan techniczny
combustion engine
exhaust gas cleaning
technical condition
Opis:
W artykule przedstawiono wyniki analizy literatury oraz badań własnych dotyczących efektywności działania systemów oczyszczania spalin silników ZI. Problem ten przedstawiono poprzez analizę wyników badań okresowych pojazdów przeprowadzonych na Podstawowej Stacji Kontroli Pojazdów. Tematykę tą uzupełniono o analizę danych statystycznych dotyczących struktury i wieku oraz średniego rocznego przebiegu pojazdów. Ponadto, w opracowaniu przedstawiono uzyskane wyniki badań własnych przeprowadzonych w na wybranej grupie pojazdów. Zakres badań i analiz dotyczył określenia efektywności działania oraz stanu technicznego systemów oczyszczania spalin pojazdów użytkowanych przez przeciętnych użytkowników.
The article presents the results of experimental research connected with the efficiency of vehicle after treatment systems powered by spark ignition engines. These issues were presented by the analysis of the results of annual technical inspection elaborated in the station. Statistical data analysis connected with the vehicle age’s structure and average annual travelled distance were presented in this work. Moreover, the experimental research were conducted of the basis of chosen vehicle group with the different technical condition. The scope of the research and analysis was indicated to a catalyst converter efficiency for vehicles used by statistical driver.
Źródło:
Combustion Engines; 2015, 54, 3; 719-725
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Quantitative Indicators of the Instantaneous Speed of a Ship’s Main Engine and its Usability in Assessing the Quality of the Combustion Process
Autorzy:
Chybowski, Leszek
Kazienko, Damian
Powiązania:
https://bibliotekanauki.pl/articles/2064695.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
internal combustion engine
speed measurement
cylinder misfire
quantitative indicators
condition monitoring
instantaneous speed
Opis:
A graph of the changes in an engine’s operating speed can be used to assess the quality of the combustion in its cylinders. In this paper, the authors carried out tests on a Buckau-Wolf R8VD-136 ship engine, which was directly driving the propeller. This engine is owned by the Laboratory of Marine Engine Rooms at the Maritime University of Szczecin. For standard rotational speeds ranging from 200 to 280 rpm, with increments of 20 rpm, the authors measured the changes in the instantaneous speed for the engine’s normal operating conditions (reference graphs) as well as with one of the cylinders being out of operation. A no-combustion situation was successively introduced into each cylinder for each preset rotational speed. The obtained graphs of the instantaneous speed were then used to determine certain quantitative indicators, which the authors believe can provide information about the technical condition of the engine. The analysis concerned the averaged graphs of the speed under the conditions set for five consecutive engine operating cycles. The indicators that were calculated included the maximum difference in the speed over the engine’s full operating cycle, the uniformity of the engine speed and the differential speed area factor, the latter a term that has been proposed by the authors. The values of the individual indicators that were obtained from the reference graphs and the graphs with no combustion in one of the cylinders were compared. All indicators are sensitive to cylinder misfire. Conclusions were then drawn on the usefulness of these indicators in assessing the condition of an engine.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2020, 3, 1; 93--106
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Determination of specific fuel consumption of IC engine in transient conditions
Wyznaczanie jednostkowego zuzycia paliwa silnika spalinowego w warunkach nieustalonych
Autorzy:
Grzelka, J.
Powiązania:
https://bibliotekanauki.pl/articles/792124.pdf
Data publikacji:
2012
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
combustion engine
spark ignition engine
fuel consumption
transient condition
motor vehicle
satellite navigation system
fuel injection system
vertical profile
route
telecommunication
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2012, 12, 1
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
An experimental study of the effects of cylinder lubricating oils on the vibration characteristics of a two-stroke low-speed marine diesel engine
Autorzy:
Wu, Gang
Jiang, Guodong
Chen, Changsheng
Jiang, Guohe
Pu, Xigang
Chen, Biwen
Powiązania:
https://bibliotekanauki.pl/articles/34603764.pdf
Data publikacji:
2023
Wydawca:
Politechnika Gdańska. Wydział Inżynierii Mechanicznej i Okrętownictwa
Tematy:
two-stroke
low-speed marine diesel engine
cylinder lubricating oils
vibration characteristic
condition monitoring
Opis:
Two-stroke, low-speed diesel engines are widely used in large ships due to their good performance and fuel economy. However, there have been few studies of the effects of lubricating oils on the vibration of two-stroke, low-speed diesel engines. In this work, the effects of three different lubricating oils on the vibration characteristics of a low-speed engine are investigated, using the frequency domain, time-frequency domain, fast Fourier transform (FFT) and short-time Fourier transform (STFT) methods. The results show that non-invasive condition monitoring of the wear to a cylinder liner in a low-speed marine engine can be successfully achieved based on vibration signals. Both the FFT and STFT methods are capable of capturing information about combustion in the cylinder online in real time, and the STFT method also provides the ability to visualise the results with more comprehensive information. From the online condition monitoring of vibration signals, cylinder lubricants with medium viscosity and medium alkali content are found to have the best wear protection properties. This result is consistent with those of an elemental analysis of cylinder lubrication properties and an analysis of the data measured from a piston lifted from the cylinder after 300 h of engine operation.
Źródło:
Polish Maritime Research; 2023, 4; 92-101
1233-2585
Pojawia się w:
Polish Maritime Research
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies