Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "energy roof" wg kryterium: Temat


Wyświetlanie 1-10 z 10
Tytuł:
Determination of heat production in deep litter and in energy roof
Określenie produkcji ciepła z głębokiej ściółki i dachu energetycznego na budynku inwentarskim
Autorzy:
Myczko, A.
Karłowski, J.
Aarnink, A.J.A.
Powiązania:
https://bibliotekanauki.pl/articles/336076.pdf
Data publikacji:
2006
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Maszyn Rolniczych
Tematy:
budynek inwentarski
ciepło
produkcja
głęboka ściółka
dach energetyczny
animal building
heat
production
deep litter
energy roof
Opis:
Investigations of the installation for recovery and accumulation of heat generated in the animal building were executed. In the floor under the deep litter a tubular heat exchanger was placed, and on the roof placed was a set of solar collectors consisting of water panels integrated with the elements of the roof. Liquid from "energy roof" was directed to the boreholes where the heat was transferred to the ground deposit. The heat was used in winter season for warming up the production rooms, offices and bathroom. Comparison of heat amount coming from solar radiation with heat transferred to the liquid showed that energy roof prepared in Polish conditions reached the efficiency of 40%, what was 50-80% of performance achieved by original panels delivered by Dutch company R&R Systems b.v. Worse heat transfer was caused by poor quality of the glue used for joining. In the production room there was an effect of reduction of emissions of ammonia and greenhouse gases. The Netherlands experiments confirmed results of calculations by a special computer model. The COP (coefficient of performance) of the heat pump was a little lower than expected (3,2 versus 3,5).
Przeprowadzono badania instalacji do odzysku i kumulacji ciepła, umieszczonej w budynku inwentarskim. W posadzce chlewni, pokrytej głęboką ściółką, umieszczono wężownicę do odzysku ciepła ze ściółki, natomiast na dachu umieszczono wodne kolektory słoneczne -prototyp "dachu energetycznego". Czynnik obiegowy kierowany był do rur zagłębionych w odwiertach geotermicznych, które stanowiły gruntowy magazyn ciepła. Ciepło wykorzystywano w miesiącach jesienno-zimowych do ogrzewania pomieszczeń produkcyjnych, socjalnych i biurowych. Porównanie ilości ciepła pochodzącego od promieniowania słonecznego z ciepłem przejętym przez kolektory pozwala na stwierdzenie, że dach energetyczny wykonany w warunkach polskich pracował ze średnią sprawnością 40%, co stanowiło 50 do 80% wartości uzyskiwanej w oryginalnych panelach holenderskiej firmy R&R Systems. Duży wpływ na gorsze warunki wymiany ciepła miała dokładność przyklejenia paneli wodnych do blachy pokrycia dachowego. W pomieszczeniach produkcyjnych z głęboką ściółką uzyskano efekt obniżenia emisji gazów cieplarnianych oraz amoniaku. W warunkach holenderskich doświadczalnie potwierdzono wyniki uzyskane za pomocą specjalnie opracowanego programu obliczeniowego. Uzyskany współczynnik efektywności COP dla pompy ciepła był równy 3,2 i był mniejszy niż oczekiwany 3,5.
Źródło:
Journal of Research and Applications in Agricultural Engineering; 2006, 51, 1; 5-9
1642-686X
2719-423X
Pojawia się w:
Journal of Research and Applications in Agricultural Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental estimation of thermal emissivity for the roofing paper in blue colour
Autorzy:
Zapałowicz, Zbigniew
Walterowicz, Anna
Powiązania:
https://bibliotekanauki.pl/articles/240669.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
blue roof cover
thermal emissivity of roof
reflectivity of roof
energy balance for roof
dach
pokrywa
emisyjność cieplna
współczynnik odbicia
bilans energetyczny
Opis:
Effective use of energy in various branches of economy is one of world trends in development of power engineering. Relevant energy consumption occurs during exploitation of buildings, so there is still potential to diminish it as far as heating, ventilation, and air conditioning are concerned. Particularly in summer season, the choice of respective roofing colour can play a decisive role for the heat flux transferred to the inside of the object. Decrease of heat flux causes a lower heat burden to the building and lower power consumption by the air conditioning systems. In winter, on the contrary, heat flux transferred to building’s interior should be higher, as a result, demand of energy for heating will be lower. However, calculations of the heat flux require that energy balance must be made for the object. Unfortunately, not all producers of roofing covers inform about the values of reflectivity and thermal emissivity of their products, which is, in turn, necessary for calculations. In the present paper, research methodology elaborated by authors is proposed for determination of thermal emissivity of roofing covers. The paper presents test stand, methodology, and research results for roofing paper in blue colour (as an example) for which the thermal emissivity is an unknown parameter.
Źródło:
Archives of Thermodynamics; 2019, 40, 3; 181-194
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of irradiance and ambient temperature on roof coating temperature and heat flux transferred to interior of building
Autorzy:
Zapałowicz, Z.
Powiązania:
https://bibliotekanauki.pl/articles/95360.pdf
Data publikacji:
2017
Wydawca:
Politechnika Koszalińska. Wydawnictwo Uczelniane
Tematy:
roof coating material
heat load of building
energy balance
flat roof
materiał pokrycia dachowego
obciążenie cieplne budynku
bilans energetyczny
dach płaski
Opis:
The following article presents an analysis of the influence of the irradiance and ambient temperature on the roof coating temperature. The roof coating temperature depends mainly on the optical properties of the coating material. Those properties are the reflectivity and emissivity. The roof surface temperature determines the heat flux through the roof into the interior of the building. Proper material selection for the coating of the roof can significantly decrease the surface temperature, and as a result, decrease the heat flux into the space just below the roof. During the calculations, the model of the heat exchange derived by the author for the flat roof was used. The paper includes results of heat calculations for two coating materials with different reflectivity coefficients. The calculations were made for the specific weather conditions.
Źródło:
Journal of Mechanical and Energy Engineering; 2017, 1, 1; 107-112
2544-0780
2544-1671
Pojawia się w:
Journal of Mechanical and Energy Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of the properties and impact of the shape of a flexible photovoltaic roof tile on the effectiveness of its performance
Autorzy:
Dobrzycki, A.
Kurz, D.
Laska, D.
Powiązania:
https://bibliotekanauki.pl/articles/97279.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
photovoltaic roof tile
BIPV
amorphous cells
energy yield
current–voltage characteristics
photovoltaic module exposure
Opis:
This paper concerns building integrated photovoltaics (BIPV), and in particular, potential advantages resulting from the use of this technology. The possibilities of integration of the BIPV elements in the building structure were presented, with particular consideration of photovoltaic roof covering. In order to demonstrate the legitimacy of using solutions of this type in real conditions, the subject of the analysis was the thin–film photovoltaic module, which constitutes an integral part of the photovoltaic roof tile. During the tests, particular attention was paid to changes in parameters of the tested object, depending on the way it is shaped in relation to the solar radiation, demonstrating in this way, the necessity to strive for the optimal exposure of the BIPV elements in relation to the sun.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 432-443
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Possibilities of improving the thermal protection of residential buildings by the application of over-rafter roof insulation systems
Autorzy:
Respondek, Zbigniew
Powiązania:
https://bibliotekanauki.pl/articles/34670834.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
energy-efficient building
quality of construction works
PIR roof panel
thermal insulation of roof
budynek energooszczędny
jakość robót budowlanych
płyta dachowa PIR
ocieplenie dachu
Opis:
The need to save energy, as well as the constant tightening of regulations regarding thermal protection of buildings force the need to look for solutions increasing the thermal performance of building envelopes. One of the important issues in this regard is the appropriate thermal insulation of usable attics. Currently, two layers of mineral wool are most often used - one between the rafters and the other under the rafters. Recently, an alternative solution has emerged, namely PIR (polyisocyanurate) foam over-rafter roof insulation systems. The aim of the article is to assess the legitimacy of using this new method of roof slope insulation. Appropriate conclusions were formulated on the basis of the technical and economic analysis of PIR foam parameters and other insulation materials, and a case study in which one of the actual implementations of the over-rafter insulation was analyzed. It was found that the use of PIR panels as the external insulation of roof slopes gives benefits primarily in terms of improving the quality of thermal insulation works. The over-rafter system is easier to implement than the classical solution (fewer possibilities of assembly errors), and above all, it minimizes thermal bridges. In addition, PIR has a better thermal conductivity than mineral wool, which reduces the necessary insulation thickness, and the possibility of condensation inside the envelope and cold air infiltration is also limited. The barrier to the use of this solution is currently primarily the high price of PIR roof panels, but as shown, the benefits associated with improving the quality of insulation are taken into account and encourage investors to choose such a solution.
Źródło:
Quality Production Improvement - QPI; 2021, 3, 1; 283-292
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Efficiency of solar roof with transparent cover for heating supply of buildings
Zastosowanie kolektorów z przezroczystą powłoką do ogrzewania budynków
Autorzy:
Voznyak, O.
Shapoval, S.
Pona, O.
Kasynets, M.
Powiązania:
https://bibliotekanauki.pl/articles/2065366.pdf
Data publikacji:
2014
Wydawca:
Politechnika Częstochowska
Tematy:
solar roof
efficiency of solar energy
solar radiation
kolektor słoneczny
efektywność energii solarnej
promieniowanie słoneczne
Opis:
The method of increasing the efficiency of solar energy of solar roof with transparent coatings is considered in this article. The results of studies on the incoming solar radiation of solar roof are described. It is shown that the heat from building roofing material can be effectively used. The dependence between the different orientations of solar roof and its efficiency is established.
W tym artykule rozpatrzono sposób zwiększenia efektywności energii słonecznej z kolektorów z przezroczystą pokrywą. Opisano wyniki badań pochłaniania promieniowania słonecznego przez kolektor. Pokazano, że możliwe jest skuteczne wykorzystanie ciepła od materiałów okrywy budynku. Ustalono zależność pomiędzy różnymi orientacjami kolektora a jego efektywnością.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2014, 2 (14); 117--124
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza parametrów fizykalnych dachów zielonych i ich złączy w świetle nowych wymagań cieplnych
Analysis of physical parameters of green roofs and their partition in light of current thermal requirements
Autorzy:
Pawlaczyk, M.
Pawłowski, K.
Powiązania:
https://bibliotekanauki.pl/articles/2065418.pdf
Data publikacji:
2017
Wydawca:
Politechnika Częstochowska
Tematy:
dachy zielone
budownictwo energooszczędne
nowoczesne materiały termoizolacyjne
green roof
low energy building
modern thermal insulation materials
Opis:
W pracy poruszono tematykę dachów zielonych z wykorzystaniem różnych materiałów termoizolacyjnych. Określono minimalne grubości materiałów termoizolacyjnych konieczne dla spełnienia nowych wymagań cieplnych i zaproponowano prawidłową konstrukcję wybranego złącza. Na podstawie przeprowadzonych obliczeń parametrów fizykalnych można stwierdzić, że zaprojektowanie przegrody dachowej z użyciem nowoczesnych materiałów spełniające wymagania prawne w zakresie budownictwa niskoenergetycznego po 2021 roku jest możliwe.
In this paper was raised up the subject of green roofs using different insulating materials. It was specified the minimum thickness of the insulating materials necessary to fulfillment the new thermal requirements and proposed some correct joints structure. On the basis of physical parameters calculations can be determined, that it is possible, to design a roof barrier with modern materials which meet legal requirements in the construction of low energy after 2021.
Źródło:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym; 2017, 1 (19); 55--60
2299-8535
2544-963X
Pojawia się w:
Budownictwo o Zoptymalizowanym Potencjale Energetycznym
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ podatności obrotowej połączenia rygiel - słup na sztywność połaciową energoaktywnego przekrycia hali ramowo-płatwiowej
The influence of rotational flexibility of beam-column connection on roof plane rigidity of energy-active cover of frame-purlin hall
Autorzy:
Brzezińska, K.
Szychowski, A.
Powiązania:
https://bibliotekanauki.pl/articles/390483.pdf
Data publikacji:
2013
Wydawca:
Politechnika Lubelska. Wydawnictwo Politechniki Lubelskiej
Tematy:
sztywność połaciowa
połączenia podatne
systemy stężeń
przekrycie energoaktywne
roof plane rigidity
semi-rigid connection
bracing systems
energy-active covers
Opis:
W pracy przeanalizowano wpływ podatności obrotowej połączenia rygiel-słup na sztywność połaciową podłużnie stężonego przekrycia ramowo - płatwiowego hali o konstrukcji pełnościennej, przystosowanej do pozyskiwania energii cieplnej z promieniowania słonecznego. W takim przypadku pokrycie dachu stanowi szklana przegroda przezroczysta, wymagająca znacznej sztywności połaciowej przekrycia. Celem analizy było porównanie sztywności połaciowej przekrycia ramowo–płatwiowego z przekryciami strukturalnymi i wiązarowo-płatwiowymi, w zależności od typu stężenia podłużnego oraz sztywności obrotowej połączenia rygiel-słup. Badania przeprowadzono dla trzech schematów stężeń połaciowych i różnych wskaźników sztywności połączenia rygiel-słup (od u=0 –połączenie przegubowe, przez u=0,25; 0,5; 0,75 –połączenie podatne, do u=1 –połączenie sztywne). W przenoszeniu sił poziomych zaobserwowano zjawisko interakcji sztywności ram z węzłami podatnymi (rygiel-słup) z połaciowymi stężeniami podłużnymi, opartymi na stężeniach poprzecznych ścian szczytowych. Największą sztywność połaciową wykazały stężenia „2X” i „K” ze sztywnymi węzłami w narożach ram.
The paper analyses the influence of the rotational flexibility of beam-column connection on the roof plane rigidity of the longitudinally braced frame-purlin cover of the solid wall hall. The cover is adapted to obtain thermal energy from solar radiation. The roof cover is then provided in the form of a transparent glass barrier which requires considerable roof plane rigidity. The analysis aimed to compare the roof plane rigidity of the frame-purlin cover to those of space structures and truss-purlin covers, depending on the type of longitudinal bracing and rotational rigidity of the beam-column connection. The investigations were conducted for three types of roof plane bracing and different rigidity indexes of the beam-column connection (from u=0 – pin connection, through u=0.25; 0.5; 0.75 – semi-rigid connection, to u=1 – rigid connection). In the transfer of horizontal forces, the interaction of the rigidity of frames with flexible nodes (beam-column) with longitudinal roof plane bracings supported by lateral bracings of gable walls was observed. The highest roof plane rigidity was demonstrated by 2X-shaped and K-shaped braces with rigid nodes at frame corners.
Źródło:
Budownictwo i Architektura; 2013, 12, 2; 197-204
1899-0665
Pojawia się w:
Budownictwo i Architektura
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geometrical aspects of an insolation of a multi-side roofs surface
Geometryczne aspekty nasłonecznienia powierzchni dachu wielospadowego
Autorzy:
Koźniewski, E.
Orłowski, M.
Powiązania:
https://bibliotekanauki.pl/articles/119215.pdf
Data publikacji:
2010
Wydawca:
Polskie Towarzystwo Geometrii i Grafiki Inżynierskiej
Tematy:
descriptive geometry
multi-side roof's geometry
solar energy
solar radiation components
geometry of shade and shadows
geometria wykreślna
geometria dachu wielospadowego
energia słoneczna
komponenty promieniowania słonecznego
Opis:
This paper aims at formulation of universal method of evaluating the amount of solar energy that is absorbed by building’s roof which is necessary to determine the optimum value of solar energy depending on roof’s geometry and its location in respect to the four quarters of the globe. The paper presents an interesting application of Monge’s method of appointing shade geometry with a help of AutoCAD software. The concept of direct surface insolation indicator is introduced in order to determine the volume of solar energy.
W pracy podano sposób obliczania wielkości energii słonecznej jakąprzyjmuje dach budynku w celu wyznaczenia wartości optymalnej w zależności od kształtu dachu i usytuowania budynku względem stron świata. Do wyznaczania geometrii części oświetlonej dachu (równoważnie - geometrycznego cienia) zastosowano metodę Monge’a z wykorzystaniem programu AutoCAD. Rozważania ograniczono do „pomiaru” promieniowania bezpośredniego i, w celu określenia wielkości energii słonecznej, wprowadzono pojęcie wskaźnika nasłonecznienia bezpośredniego powierzchni.
Źródło:
Journal Biuletyn of Polish Society for Geometry and Engineering Graphics; 2010, 21; 37-42
1644-9363
Pojawia się w:
Journal Biuletyn of Polish Society for Geometry and Engineering Graphics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Współczesne tendencje przeobrażeń urbanistycznych w małych i średnich miastach na przykładzie budownictwa zielonego
Autorzy:
Pilch, Roman
Powiązania:
https://bibliotekanauki.pl/articles/161382.pdf
Data publikacji:
2019
Wydawca:
Polski Związek Inżynierów i Techników Budownictwa
Tematy:
planowanie przestrzenne
miasto zielone
rozwiązanie modelowe
rozwiązanie prawne
energia odnawialna
dach zielony
działanie proekologiczne
Dolny Śląsk
spatial planning
green city
model solution
legal solution
renewable energy
green roof
proenvironmental performance
Lower Silesia
Opis:
Współczesne budownictwo ekologiczne, którego przykładem jest „zielone budownictwo” rozwija się w sposób synergiczny (współpraca wielu specjalności, np. botanika, chemia, inżynieria budowlana). Nowe technologie budowlane oparte na realizacji zielonych dachów, zielonych elewacji budynków zintegrowane z inżynieryjnymi rozwiązaniami uzbrojenia terenu umożliwiają zagospodarowanie obszarów, uzyskując nową jakość przestrzeni urbanistycznej. Przystosowanie dotąd nieuzbrojonych terenów do możliwości ich zabudowy w małych i średnich miastach determinuje konieczność realizacji proporcjonalnie kosztownych systemów kanalizacji deszczowej. Zabudowa nowych terenów może zostać zbilansowana poprzez przywrócenie w znacznej części nowo urządzonej powierzchni biologicznie czynnej na dachach i ścianach projektowanych budynków dotąd niewykorzystanych na te cele, a powodujących konieczność odprowadzenia wód deszczowych na nich zalegających. W taki sposób można także rewitalizować obszary poprzemysłowe, które uznawano dotąd jako utracone pod względem aktywności biologicznej. W artykule przedstawiono wybrane sposoby rewitalizacji obszarów, w których elementy „zielonego budownictwa” tworzą nową jakość estetyczną przestrzeni i przywrócenie w znacznej części powierzchni biologiczne aktywnych na tych obszarach.
Źródło:
Przegląd Budowlany; 2019, 90, 10; 30-34
0033-2038
Pojawia się w:
Przegląd Budowlany
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-10 z 10

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies