Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "emissivity" wg kryterium: Temat


Tytuł:
Emissivity measurement of black paint using the calorimetric method
Autorzy:
Pelińska-Olko, Ewa
Powiązania:
https://bibliotekanauki.pl/articles/27312234.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
calorimetric method
emissivity
thermosensitive materials
polymers
plastics
Opis:
The paper is of practical importance and describes the construction of a test rig and the measurement method for determining the relative emissivity coefficient of thermosensitive thin polymer coatings. Polymers are high-molecular chemical compounds that produce chains of repeating elements called ‘mers’. The polymers can be natural and artificial. The former ones form the building material for living organisms, the latter – for plastics. In this work, the words plastics and polymers are used as synonyms. Some plastics are thermosensitive materials with specific physical and chemical properties. The calorimetric method mentioned in the title consists of two steps. The first stage, described here, involves very accurately measuring the emissivity of black paint with the highest possible relative emissivity coefficient, which covers the surface of the heater and the inner surface of the chamber. In the second step, the thermosensitive polymer will be placed on the inner surface of the chamber, while black paint with a known emissivity coefficient will remain on the heater. Such a way of determining the properties of thermosensitive polymers will increase the error of the method itself, but at the same time will avoid melting of the polymer coating. During the tests, the results of which are presented in this work, the emissivity coefficient of the black paint was obtained in the range of 0.958–0.965.
Źródło:
Archives of Thermodynamics; 2023, 44, 3; 161--177
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka termowizyjna układów elektronicznych
Thermographic diagnostics of the electronic systems
Autorzy:
Hulewicz, Arkadiusz
Dziarski, Krzysztof
Krawiecki, Zbigniew
Antecki, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/34655809.pdf
Data publikacji:
2022
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
kamera termowizyjna
współczynnik emisyjności
promieniowanie podczerwone
natężenie promieniowania
thermographic camera
emissivity factor
infrared radiation
radiation intensity
Opis:
Tematyka artykułu związana jest z pomiarami termowizyjnymi i ich wykorzystaniem w diagnostyce układów elektronicznych. Dostępność kamer termowizyjnych przyczynia się do wszechstronnego ich zastosowania. Jedną z dziedzin wykorzystujących kamery termowizyjne jest diagnostyka układów elektronicznych. Umożliwia ona odpowiednio wczesne wykrycie przyszłych uszkodzeń objawiających się wzrostem temperatury, a także ocenę właściwego doboru elementów elektronicznych i metod ich chłodzenia. W artykule przedstawiono podstawowe zagadnienia związane z pomiarami termowizyjnymi, omówiono najważniejsze źródła błędów występujące podczas pomiarów termowizyjnych elementów elektronicznych. Przedstawiono stanowisko pomiarowe do termowizyjnej diagnostyki elementów elektronicznych oraz wyniki badań przeprowadzonych na elementach elektronicznych działających w warunkach rzeczywistych.
The subject of the article is related to the thermographic measurements and their use in the diagnostics of the electronic systems. The availability of the thermographic cameras contributes to their versatile use. One of the areas that use the thermographic cameras is the diagnostics of the electronic systems. It enables the early detection of the future damage manifested by an increase in temperature, as well as the assessment of the correct selection of the electronic components and the methods of their cooling. The article presents the basic issues related to the thermographic measurements, discusses the most important sources of errors occurring during the thermographic measurements of the electronic components. The paper presents the measuring station for the thermographic diagnostics of the electronic components and the results of the tests carried out on the electronic components operating in real conditions.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2022, 107; 5-16
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Inverse Solution to the Vertical Plate Cooling by Radiation and Convection in Air
Autorzy:
Hadała, Beata
Malinowski, Zbigniew
Gołdasz, Andrzej
Cebo-Rudnicka, Agnieszka
Powiązania:
https://bibliotekanauki.pl/articles/2134090.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
convection heat transfer
radiation heat transfer
plate emissivity
vertical plate
Opis:
The inverse solution to the heat flux identification during the vertical plate cooling in air has been presented. The developed solution allowed to separate the energy absorbed by the chamber due to radiation from the convection heat losses to air. The uncertainty tests were carried out and the accuracy of the solution has been estimated at a level of 1%-5% depending on the boundary condition model. The inverse solution was obtained for the temperature measurements in the vertical plate. The stainless-steel plate was heated to 950°C and then cooled in the chamber in air only to about 30°C. The identified heat transfer coefficient was compared with the Churchill and Chu model. The solution has allowed to separate the radiation heat losses and to determine the Nusselt number values that stay in good agreement with the Churchill and Chu model for a nearly steady-state air flow for the plate temperature below 100°C.
Źródło:
Archives of Metallurgy and Materials; 2022, 67, 3; 1167--1178
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Managing CO₂ Emission in the Energy Sector and Climate Policy
Zarządzanie emisją CO₂ w energetyce a polityka klimatyczna
Autorzy:
Rabajczyk, Anna
Rabajczyk, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/2060728.pdf
Data publikacji:
2021
Wydawca:
Centrum Naukowo-Badawcze Ochrony Przeciwpożarowej im. Józefa Tuliszkowskiego
Tematy:
emissivity
CO2
power engineering
climate change
emisyjność
energetyka
zmiany klimatu
Opis:
Aim: The article presents information on the issue of CO2 emission (called greenhouse gas) from the energy sector, along with tools enabling the determination of CO2 emissivity used to manage this process and the directions of actions taken to minimize the negative impact on the climate. Introduction: CO2 is one of the substances essential for the functioning of life on Earth. On one hand, it is an important element of the carbon cycle in nature, being the basis for the synthesis of carbohydrates. On the other hand, it belongs to the group of greenhouse gases responsible for the climate change – and for this reason, it must be subject to constant control. Due to this fact, appropriate measures are taken, including changes in law, in the scope of emission, as well as the introduction of modern technological solutions aimed at monitoring and reducing CO2 emission. Activities undertaken in the area of energy, the branch of the economy generating the largest amounts of anthropogenic CO2, accounting for 41% of global emissions of this gas, are of significant importance [1]. The developed tools, allowing to calculate the amount of carbon dioxide emissions, expressed by emission indicators, allow for the assessment of the activities undertaken both in terms of ecology and economy. Methodology: The article was prepared on the basis of a review of selected literature, and reports as well as applicable legal requirements in the field of the discussed subject. Conclusions: The implemented measures aimed at the application of emission indicators in the area of energy allowed for the definition of forecasts and the determination of the directions of activities, in order to reduce the emission of CO2. The gradual implementation of new technological solutions, enabling energy production based on biomass or other renewable energy sources, allows for the reduction of the emission of this gas. However, given the constantly increasing energy demand, it is a slow process which is not sufficient to stop the observed changes. Therefore, it is necessary to take further steps, to develop more reliable and homogeneous tools that would make it possible to compare the results regardless of the place of emission or the type of fuel used. However, it should be noted that it is necessary to cover all stages of the construction and operation of the energy sector with the measures mentioned above, which generate CO2 emission, and not only the combustion process itself.
Cel: Artykuł przedstawia informacje na temat problematyki emisji CO2 (nazywanego gazem cieplarnianym) z obszaru energetyki wraz z narzędziami umożliwiającymi określenie emisyjności CO2 służącej do zarządzania tym procesem oraz kierunki podejmowanych działań celem minimalizacji negatywnego wpływu na klimat. Wprowadzenie: CO2 należy do substancji istotnych dla funkcjonowania życia na Ziemi. Z jednej strony stanowi istotny element obiegu węgla w przyrodzie, będąc podstawą do syntezy węglowodanów. Z drugiej natomiast należy do grupy gazów cieplarnianych, odpowiedzialnych za zmiany klimatyczne – między innymi z tego powodu musi podlegać stałej kontroli. W tym celu podejmowane są odpowiednie działania obejmujące zmiany w prawie, zakresie wielkości emisji, jak i wprowadzania nowoczesnych rozwiązań technologicznych, których celem jest monitoring i redukcja emisji CO2. Istotne znaczenie mają aktywności podejmowane w obszarze energetyki, gałęzi gospodarki generującej największe ilości antropogenicznego CO2, odpowiadającej za 41% globalnej emisji tego gazu [1]. Opracowywane narzędzia, pozwalające na obliczenie wielkości emisji ditlenku węgla, wyrażonej przez wskaźniki emisyjności, pozwalają na ocenę podejmowanych działań zarówno pod względem ekologicznym, jak i ekonomicznym. Metodologia: Artykuł został opracowany na podstawie przeglądu wybranej literatury, raportów i sprawozdań oraz obowiązujących wymagań prawnych z zakresu poruszanej tematyki. Wnioski: Wprowadzone działania mające na celu zastosowanie wskaźników emisyjności w obszarze energetyki pozwoliły na określenie prognoz i wyznaczenie kierunków działań, których efektem jest redukcja emisji CO2. Stopniowa implementacja nowych rozwiązań technologicznych, umożliwiających produkcję energii w oparciu o biomasę czy inne odnawialne źródła energii, pozwala na zmniejszanie wielkości emisji tego gazu. Jest to jednak proces powolny, który przy stale wzrastającym zapotrzebowaniu na energię nie jest wystarczający do tego, aby zatrzymać obserwowane zmiany. Konieczne jest zatem podejmowanie kolejnych działań, opracowanie bardziej wiarygodnych i jednorodnych narzędzi, które pozwoliłyby na porównywanie wyników bez względu na miejsce emisji czy też rodzaj zastosowanego paliwa. Należy jednak zaznaczyć, że niezbędne jest objęcie wspomnianymi działaniami wszystkich etapów budowy i funkcjonowania sektora energetycznego, które generują emisję CO2, a nie jedynie samego procesu spalania.
Źródło:
Safety and Fire Technology; 2021, 58, 2; 6--21
2657-8808
2658-0810
Pojawia się w:
Safety and Fire Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Nowatorskie pokrycia powierzchni ciał czarnych dla zakresu dalekiej podczerwieni
Novelty Surface Coatings for Far Infrared Spectrum Black Body Radiators
Autorzy:
Ligienza, Andrzej
Bieszczad, Grzegorz
Sosnowski, Tomasz
Bartosewicz, Bartosz
Firmanty, Krzysztof
Powiązania:
https://bibliotekanauki.pl/articles/2068669.pdf
Data publikacji:
2021
Wydawca:
Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów
Tematy:
ciało czarne
termowizja
emisyjność
black body
thermography
emissivity
Opis:
Źródła promieniowania ciała doskonale czarnego są powszechnie stosowanymi urządzeniami w dziedzinach związanych z obrazowaniem termicznym i radiometrią. Stanowią najbliższe fizyczne przybliżenie teoretycznego emitera ciała doskonale czarnego wyprowadzonego z prawa Plancka. Większość takich urządzeń jest kosztowna, a informacje o technologii ich wytwarzania, w tym o powierzchni emitera, są ograniczone. Wybrano kilka stosunkowo łatwo dostępnych powłok mających potencjalne zastosowanie w tego typu urządzeniach i zmierzono ich emisyjność. W pracy przedstawiono pomiary, które dostarczają informacji niezbędnych do określenia, czy wśród wybranych istnieją powłoki zdatne do emitowania lub powierzchnie odniesienia.
Black body radiation sources are commonly used devices in areas related to thermal imaging and radiometry. They are the closest physical approximation of theoretical black body emitter derived from the Planck’s law. Majority of such devices are costly with restricted information about their production technology, including their emitter surface. A few relatively easily accessible coatings with potential application in such devices have been chosen and their emissivity measured. The paper presents measurements that provides information necessary to determine whether there are coatings viable for black body emitter or reference surface.
Źródło:
Pomiary Automatyka Robotyka; 2021, 25, 4; 77--82
1427-9126
Pojawia się w:
Pomiary Automatyka Robotyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical and Experimental Investigation of the Influence of External Wall Moisture on Building Temperature Distributions
Autorzy:
Urzędowski, Arkadiusz
Zaburko, Jacek
Gleń, Piotr
Łagód, Grzegorz
Powiązania:
https://bibliotekanauki.pl/articles/2023298.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
CFD
CFX
heat transfer coefficient
wet building materials
thermal imaging
building structural
materials
surface emissivity
Opis:
In this paper, the authors made attempt to analyse the influence of moisture in the external wall of a building on the distribution of the temperature field, using numerical and experimental methods. Studies were carried out in the places of heat leakage occurring in structural joints of a single-family residential building, built in the traditional technology. In this study, the thermal bridge parameters were calculated by determining the values of thermal and moisture identifiers. For this purpose, two three-dimensional models of the building partition were designed based on an existing structure, and the boundary conditions for simulations were determined. The obtained heat flux values made it possible to perform quantitative calculations of heat flux distributions and temperatures of construction joints within the thermal bridge occurrence area. Moreover, the accuracy of the final temperatures obtained after combining the mathematical models with the values determined from thermograms was evaluated. In order to validate the results of numerical simulation, a test model was used taking into account the parameters specified in PL-EN 15026. The analysis aimed to present the handiness of using the simulation at the stage of planning the design and thermomodernisation of buildings in the places particularly exposed to adverse terrain and atmospheric conditions.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 3; 297-308
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Regional Mapping of Land Surface Temperature (LST), Land Surface Emissivity (LSE) and Normalized Difference Vegetation Index (NDVI) of South-South Coastal Settlements of Rivers State in Nigeria
Autorzy:
Nwaerema, Peace
Ajiere, Suzan
Powiązania:
https://bibliotekanauki.pl/articles/1031686.pdf
Data publikacji:
2020
Wydawca:
Przedsiębiorstwo Wydawnictw Naukowych Darwin / Scientific Publishing House DARWIN
Tematy:
Regional
land surface emissivity
land surface temperature
normalized difference vegetation index
population
urbanization
Opis:
This study is the regional mapping of Land Surface temperature (LST), Land Surface Emissivity (LSE) and Normalized Difference Vegetation Index (NDVI) of south-south coastal settlements of Rivers State in Nigeria. The Google Earth Engine (GEE) of satellite remote sensing origin was used in the study. It was observed that land surface area of the south-south coastal settlements of the region hosting a total population of 3,344,706 persons had undergone severe modification and alteration of vegetal cover by increased human activities especially in the central area. Emissivity in the region increased from the center to the rural settlements with values ranging 0.98 to 0.99 and difference of 0.01 indicating that there was increased modification of the regional land surface. Land surface temperature decreased from the regional center to the rural settlements ranging between 22.12 ºC to 35.99 ºC with a difference of 13.87 ºC. However, LST was scattered in different settlement spots especially in the northern region such as Aleto, Finema (south); Rumuolu, Odogwa, Abara, Umuechem, Rumuola, Ambroda (north) among others. The normalized vegetation index showed -0.54358 to 0.409327 having the difference of 0.952907 indicating greater variation in vegetal cover across the region. Thus, NDVI in the region increased from the regional center to the outskirts of the area. Urbanization in the south-south region of Rivers State had extended severely to the rural settlements. Therefore, it is recommended that policy makers and regional planners should protect the area from adverse vegetal lost and heat effects by implementing regional greening practices.
Źródło:
World News of Natural Sciences; 2020, 28; 76-86
2543-5426
Pojawia się w:
World News of Natural Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Visual Effects of Surface Emissivity in Thermal Imaging
Autorzy:
Urzędowski, Arkadiusz
Wójcicka-Migasiuk, Dorota
Buraczyńska, Barbara
Powiązania:
https://bibliotekanauki.pl/articles/102725.pdf
Data publikacji:
2020
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
surface emissivity
thermal imaging
building structural materials
emisyjność powierzchniowa
termowizja
materiały konstrukcyjne budynków
Opis:
The article discusses the impact of surface emissivity on the thermograms, obtained from a thermal imaging camera during the measurements of construction objects. The study was carried out as an analysis of the digital and thermal images for three selected materials types of building finishing such as: wood outside doors, cement-lime plaster and glass façade. The images obtained from the exterior and from the interior of the buildings were compared and analyzed in terms of the spectrum intensity within the range of ambient temperature. The result of the conducted research shows how important it is to use both side images for such details as locks, door knobs and handles to properly assess the optional light reflections, especially on glossy surfaces. The influence of the most significant factors on the surface emissivity, such as direction of emission θ, surface temperature TS, radiation wavelength λ, time τ, was discussed on the basis of the experiment. The measurements were made using a Flir T440bx thermal imaging camera, while for the analysis of thermal images and the generation of graphs, the Flir Tools+ 6.4.18039.1003 software was used. For all tested materials, the emissivity value was estimated using a camera and black insulating tape characterized by a known emissivity value ε = 0.98. The study of materials with different emissivity under the reference conditions helped to identify the influence of material reflectivity on the obtained temperature spectrum values and to correctly perform the research. The temperature ranged between 269–293 K, but in particular measurements, the range was reduced. The thermal images reveals additional unexpected details of insulation discontinuity, the indication of which is necessary for building modernization. The wood door joinery research showed the leakage, which disqualifies them from use in low energy buildings in much more definite way because the temperature range resulting from heat outflow approaches even 15 K. The use of glass wind insulation boards can eliminate the wood door icing, which occurs at a temperature of about 268 K, and at the same time, increase the temperature of the shielded door by about 10 K.
Źródło:
Advances in Science and Technology. Research Journal; 2020, 14, 2; 215-222
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Economic growth and carbon dioxide emissions
Wzrost gospodarczy a emisja dwutlenku węgla
Autorzy:
Famielec, Józefa
Kijanka, Anna
Renata Żaba-Nieroda, Renata
Powiązania:
https://bibliotekanauki.pl/articles/962484.pdf
Data publikacji:
2019
Wydawca:
Główny Urząd Statystyczny
Tematy:
emisyjność PKB
emisje CO2
zanieczyszczenie
wzrost gospodarczy
emissivity of gdp
co2 emissions
pollution
economic growth
Opis:
The emissions of carbon dioxide (CO2) are an objective result of the civilizational development of the world. Ensuring a steady decline in CO2 emissions in the conditions of economic growth and social welfare requires a structural analysis of systemic dependencies. The purpose of the study is to investigate the contribution of different socio- -economic factors to the changes in carbon dioxide emissions. A decomposition analysis is performed to examine the pace of CO2 emission changes in relation to changes in: emissivity of gross domestic product (GDP), productivity of man-hours, number of employees and working time per employee. Statistical data refer to the Polish economy in the period of 1990—2015. The results provided in this paper show that the economic growth in Poland had the most noticeable contribution to CO2 emission changes. The solid growth of economy was accompanied by decreasing emissivity of GDP. The increase in the labour supply, observed in some periods, contributed to the relative growth of that factor in pollutant emission changes. Considering the growing labour productivity, efforts to increase employment should be correlated with decreasing number of working hours per employee.
Emisja dwutlenku węgla (CO2) jest obiektywnym skutkiem rozwoju cywilizacyjnego świata. Zapewnienie stałego spadku emisji CO2 w warunkach wzrostu gospodarczego i dobrobytu społecznego wymaga strukturalnej analizy zależności systemowych. Celem niniejszego opracowania jest zbadanie udziału różnych czynników społeczno- -gospodarczych w kształtowaniu się zmian emisji CO2. Analizę przeprowadzono na podstawie dekompozycji tempa zmian emisji CO2 w odniesieniu do zmian: emisyjności produktu krajowego brutto (PKB), produktywności roboczogodziny, liczby zatrudnionych i czasu pracy jednego zatrudnionego. Wykorzystano dane statystyczne odnoszące się do gospodarki w Polsce. Przyjęto okres badawczy obejmujący lata 1990—2015. Wyniki badań pokazują, że najbardziej znaczący wkład w zmiany emisji CO2 w Polsce miał wzrost gospodarczy. Stałemu wzrostowi gospodarczemu towarzyszył spadek emisyjności PKB. Obserwowany w niektórych okresach wzrost podaży pracy przyczyniał się do wzrostu udziału tego czynnika w zmianach emisji zanieczyszczeń. Biorąc pod uwagę rosnącą produktywność siły roboczej, wysiłkom zmierzającym do zwiększenia wielkości zatrudnienia powinno towarzyszyć zmniejszanie się liczby godzin pracy jednego pracownika.
Źródło:
Wiadomości Statystyczne. The Polish Statistician; 2019, 64, 4; 5-21
0043-518X
Pojawia się w:
Wiadomości Statystyczne. The Polish Statistician
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Experimental estimation of thermal emissivity for the roofing paper in blue colour
Autorzy:
Zapałowicz, Zbigniew
Walterowicz, Anna
Powiązania:
https://bibliotekanauki.pl/articles/240669.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
blue roof cover
thermal emissivity of roof
reflectivity of roof
energy balance for roof
dach
pokrywa
emisyjność cieplna
współczynnik odbicia
bilans energetyczny
Opis:
Effective use of energy in various branches of economy is one of world trends in development of power engineering. Relevant energy consumption occurs during exploitation of buildings, so there is still potential to diminish it as far as heating, ventilation, and air conditioning are concerned. Particularly in summer season, the choice of respective roofing colour can play a decisive role for the heat flux transferred to the inside of the object. Decrease of heat flux causes a lower heat burden to the building and lower power consumption by the air conditioning systems. In winter, on the contrary, heat flux transferred to building’s interior should be higher, as a result, demand of energy for heating will be lower. However, calculations of the heat flux require that energy balance must be made for the object. Unfortunately, not all producers of roofing covers inform about the values of reflectivity and thermal emissivity of their products, which is, in turn, necessary for calculations. In the present paper, research methodology elaborated by authors is proposed for determination of thermal emissivity of roofing covers. The paper presents test stand, methodology, and research results for roofing paper in blue colour (as an example) for which the thermal emissivity is an unknown parameter.
Źródło:
Archives of Thermodynamics; 2019, 40, 3; 181-194
1231-0956
2083-6023
Pojawia się w:
Archives of Thermodynamics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Spatiotemporal evolution of land surface temperature of Lake Oubeira catchment, northeastern Algeria
Przestrzenne i czasowe zmiany temperatury powierzchni ziemi w zlewni jeziora Oubeira w północnowschodniej Algierii
Autorzy:
Rezzag Bara, Chouaib
Djidel, Mohamed
Medjani, Fethi
Labar, Sofiane
Powiązania:
https://bibliotekanauki.pl/articles/292503.pdf
Data publikacji:
2019
Wydawca:
Instytut Technologiczno-Przyrodniczy
Tematy:
emissivity
lake basin
land surface temperature (LST)
normalized different vegetation index (NDVI)
SEBAL
water surface temperature (WST)
emisyjność
model SEBAL
temperatura powierzchni wody (WST)
temperatura powierzchni ziemi (LST)
zlewnia jeziora
znormalizowany różnicowy wskaźnik wegetacji (NDVI)
Opis:
The difficulties of access and detailed measurements of land surface temperature (LST) and water surface temperature (WST) especially in wetlands made the use of remote sensing data as one of the sources and techniques to estimate many climate elements including surface temperature and surface emissivity (ɛ). This study aims to estimate the surface temperature of the wetland of Lake Oubeira located in northeastern Algeria and their spatiotemporal evolution in both land and water. Landsat OLI-TIRS images in two dates (April and September 2016) obtained from the USGS have been used in this work, and forms the basis of a series of operations to obtain the final LST: development of the normalized difference vegetation index (NDVI), conversion of the digital number (DN) of the thermal infrared band (TIR) into spectral radiance as well as the calculation of the effective luminosity temperature of the sensor from the spectral radiation and surface emissivity (ɛ). The results show that the LST varies in space and time (from 16 to 31°C in April and from 24 to 41°C in September). This implies that the absorption of the equilibrium temperature at land cover depends on the optical properties of the surface, which are essentially determined by its water content, colour and morphology. At the same time, the water surface is the lowest land cover temperature, which also has a spatial variation (from 19 to 25°C in April and from 26 to 34.5°C in September) induced by atmospheric temperature, wind direction and speed and the depth of the lake.
Trudności w dostępie do badanych obszarów i w wykonaniu szczegółowych pomiarów temperatury powierzchni ziemi (LST) i wody (WST), szczególnie w środowiskach podmokłych, sprawiają, że dane pozyskane metodą teledetekcji są źródłem informacji do szacowania elementów klimatu takich jak temperatura powierzchni i emisyjność (ɛ). Celem przedstawionych badań było określenie temperatury powierzchni siedlisk podmokłych jeziora Oubeira w północnowschodniej Algierii i jej zmian zarówno na ziemi, jak i w wodzie. W pracy wykorzystano obrazy Landsat OLI-TIRS z dwóch terminów (kwiecień i wrzesień 2016 r.) uzyskane z United States Geological Survey (USGS). Stanowiły one podstawę działań zmierzających do uzyskania końcowej temperatury LST – uzyskanie znormalizowanego różnicowego wskaźnika wegetacji (NDVI), konwersję numeru DN termicznego pasma podczerwieni (TIR) do spektralnej radiancji oraz obliczenie efektywnej temperatury barwowej sensora ze spektralnego promieniowania i emisyjności powierzchniowej (ɛ). Wyniki wskazują, że LST zmienia się w czasie i w przestrzeni (od 16 do 31°C w kwietniu i od 24 do 41°C we wrześniu). Oznacza to, że absorpcja temperatury przez pokrycie powierzchni ziemi zależy od optycznych właściwości powierzchni, które są określone przez zawartość wody, barwę i morfologię. Najniższą temperaturę wykazuje powierzchnia wody. Temperatura wody także ulega zmianom (od 19 do 25°C w kwietniu i od 26 do 34.5°C we wrześniu), wywołanym przez temperaturę powietrza, kierunek i prędkość wiatru oraz głębokość jeziora.
Źródło:
Journal of Water and Land Development; 2019, 43; 151-157
1429-7426
2083-4535
Pojawia się w:
Journal of Water and Land Development
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Study of selected physical, chemical and biological properties of selected materials intended for contact with human body
Autorzy:
Mrówka, Maciej
Machoczek, Tomasz
Jureczko, Paweł
Szymiczek, Małgorzata
Skonieczna, Magdalena
Marcoll, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/778721.pdf
Data publikacji:
2019
Wydawca:
Zachodniopomorski Uniwersytet Technologiczny w Szczecinie. Wydawnictwo Uczelniane ZUT w Szczecinie
Tematy:
absorption
hardness
biocompatibility
structural materials
emissivity
Opis:
The purpose of the conducted study was to analyse new materials intended for contact with the human body in view of their physical, chemical and biological properties. The authors have put to test six commercially available materials, four out of which were composite polyamide 12-based materials, while two were polyurethanes. The examined materials were assessed in terms of the surface. Subsequently, their hardness and biocompatibility were tested. The authors devoted major attention to the tests of absorption and emissivity of water, the pH = 7.4 PBS buffer solution and pH = 4.3 artificial sweat in temperatures of 21°C and 37°C. The results of the tests have confirmed the non-toxicity of all the tested materials and allowed to provide their characteristics in terms of their surface, hardness, as well as absorption and emissivity of various body fluids. Both polyamide 12 and the tested polyurethanes are classified as thermoplastics that may be used in additive technology.
Źródło:
Polish Journal of Chemical Technology; 2019, 21, 1; 1-8
1509-8117
1899-4741
Pojawia się w:
Polish Journal of Chemical Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Testing coatings of reflecting infrared radiation for a target for night shooting
Autorzy:
Swiderski, Waldemar
Hłosta, Paweł
Polak, Grzegorz
Tymiński, Dariusz
Powiązania:
https://bibliotekanauki.pl/articles/114598.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
thermal target
infrared
emissivity
shooting
Opis:
The paper presents the principle of operation of a new night-shooting target. Because this target requires a covering that reflects the infrared radiation flux generated by the reflector from its surface, testing of different variants of the cover and the shape of the target surface has been carried out. Emissivity is a physical parameter characterizing the radiant properties of real bodies. The emissivity coefficient of extruded aluminum sheet samples covered with a layer of green colored aluminum oxide was determined. The aluminum oxide layer was applied using two different technologies being galvanic and anodizing.
Źródło:
Measurement Automation Monitoring; 2019, 65, 2; 41-43
2450-2855
Pojawia się w:
Measurement Automation Monitoring
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Thermal diagnostic systems and their application for analysis of transformer winding
Autorzy:
Sebok, Milan
Kucera, Matej
Korenciak, Daniel
Gutten, Miroslav
Powiązania:
https://bibliotekanauki.pl/articles/328684.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
thermovision
emissivity
radiation
temperature
diagnostics
transformer
termowizja
emisyjność
promieniowanie
temperatura
diagnostyka
transformator
Opis:
This paper is focused application of chosen thermal non-contact and contact methods for quality diagnostics of the transformer windings. In the first part of the paper it examines basic principles and application of non-contact temperature measurement on power transformers by thermovision. The second part is focused on analysis of thermal processes in distribution transformer. In the finally, it is examined experimental measurement on laboratory transformer with task to detect mechanical strength and subsequently short-circuit resistance of its winding. By means of the experimental measurements and following analysis it was showed the practical thermovision and contact thermal measurement by optical detectors for diagnostics of power oil transformers in field mechanical strength of winding material.
Źródło:
Diagnostyka; 2019, 20, 2; 49-55
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Emisyjność dwutlenku węgla przez samochody elektryczne w kontekście strategicznych celów rozwoju elektromobilności w Polsce i Holandii
Emissivity of the operation of electric cars in the context of the strategic goals of the development of electromobility in Poland and the Netherlands
Autorzy:
Brodacki, D.
Polaszczyk, J.
Powiązania:
https://bibliotekanauki.pl/articles/949527.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
elektromobilność
emisyjność
rozwój elektromobilności
Polska
Holandia
electromobility
emissivity
electromobility development
Polska
Netherlands
Opis:
Postęp technologiczny dotarł do miejsca, w którym niezwykle istotnym, a wręcz kluczowym elementem rynku globalnego jest rynek energetyczny. Zrównoważony rozwój i inteligentna, przemyślana dystrybucja zasobów naturalnych determinować będzie dostęp do energii, na którą popyt będzie jedynie wzrastał. Należy więc pochylić się nad podstawowym segmentem każdej gospodarki – transportem. Czy transformacja sektora transportu polegająca na odejściu od pojazdów napędzanych paliwami tradycyjnymi na rzecz samochodów elektrycznych jest prawidłowym kierunkiem rozwoju? W niniejszym artykule autorzy podejmują problematykę związaną z elektromobilnością jako czynnikiem rozwoju gospodarczego, pod kątem istotnych elementów strategii rozwoju elektromobilności Polski i Holandii, to jest w państwie, gdzie proces transformacji jest w zdecydowanie bardziej zaawansowanym stadium. Rozważania oparte są na aktualnych danych dotyczących poziomu wartości współczynnika emisyjności oraz założeniach i metodach realizacji celów ograniczenia emisji CO2 do atmosfery. Podkreślono także rolę niskoemisyjności w transporcie w kontekście kreowania popytu w sektorze, który bezpośrednio kształtować będzie wolumen sprzedaży pojazdów elektrycznych jako najbardziej ekologicznych.
Technical progress has come to the point in which the energy sector has become an extremely important element of the global market. Sustainable development and the intelligent distribution of natural resources will determine access to energy, the demand of which will only rise. A key sector to every economy is of course the transportation market: is the transformation from traditional propulsion by petrol sources to electrical solutions a good direction to pursue? In this article, the authors describe electromobility issues as an economical growth factor. Moreover, there is an attempt to define perspectives and barriers for development in the sector according to actual changes being made in international law. The paper talks about Electromobility Development Strategies in Poland and the Netherlands, where the process has already gone very far. Considerations are being made based on actual data referring to emissivity factor and assumptions, targets and methods to achieve them in order to limit CO2 emission into the atmosphere. The article also underlines the role of low-emissivity in transportation as part of the creation of demand, which will directly influence sales volume in the electrical vehicles market, as in ecological ones.
Źródło:
Polityka Energetyczna; 2018, 21, 1; 99-115
1429-6675
Pojawia się w:
Polityka Energetyczna
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies