Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "electromagnetic analysis" wg kryterium: Temat


Tytuł:
Coupled static and dynamic FE analyses of a nonlinear electromechanical vibration energy harvester
Autorzy:
Kulik, M.
Jagieła, M.
Powiązania:
https://bibliotekanauki.pl/articles/97381.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
energy harvesting
coupled structural–electromagnetic analysis
finite element analysis
Opis:
The paper presents the coupled static and dynamic mechanical–electromagnetic finite element analyses of an electromechanical vibration energy harvesting converter with permanent–magnet excitation. The system consists of a small, milliwatt power range, linear–motion generator connected to a cantilever–beam spring element. The finite element equations derived for the mechanical part of the system according to the 1–D Timoshenko beam theory are coupled strongly with those describing the 2–D distribution of magnetic field in the generator and those associated with the electric circuit. The considered electromechanical coupling allows for prediction of static and dynamic response of the system subjected to action of externally applied force. The static displacement of the moving element is computed via solution of the nonlinear system of equations and is used as an initial solution in dynamic analysis. For computation of the dynamic response of the system the time–stepping procedure based on the Crank– Nicolson discretisation schema is applied. The models are positively validated against the measurements carried out on the laboratory test–stand.
Źródło:
Computer Applications in Electrical Engineering; 2016, 14; 256-267
1508-4248
Pojawia się w:
Computer Applications in Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Coupled dynamic FE analysis of permanent-magnet mechanical vibration energy harvesting converter
Autorzy:
Kulik, M.
Jagieła, M.
Powiązania:
https://bibliotekanauki.pl/articles/377720.pdf
Data publikacji:
2016
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
energy harvesting
coupled structural-electromagnetic analysis
finite element analysis
Opis:
The paper presents a coupled dynamic mechanical-electromagnetic finite element analysis of a vibration energy harvesting converter with permanent-magnet excitation. The system consists of a small, miliwatt power range, linear-motion permanent-magnet generator connected to a cantilever-beam spring element. The finite element equations derived for the mechanical part of the system according to the 1-D Timoshenko beam theory are coupled strongly with equations describing the 2-D distribution of magnetic field in the generator and those associated with the electric circuit. The time-stepping procedure based on the Crank-Nicolson discretisation schema is applied to the obtained system of differential-algebraic equations. The model is shown to provide satisfactory predictions of the system dynamic performance which is confirmed experimentally.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2016, 85; 245-254
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A dual-stator brushless doubly-fed generator for wind power application
Autorzy:
Liu, Hao
Song, Yakai
Bai, Chunlan
He, Guofeng
Yin, Xiaoju
Powiązania:
https://bibliotekanauki.pl/articles/27309959.pdf
Data publikacji:
2023
Wydawca:
Polska Akademia Nauk. Czasopisma i Monografie PAN
Tematy:
doubly-fed machine
dual-stator
electromagnetic analysis
operational characteristics modes
wind power generation
Opis:
A novelty dual-stator brushless doubly-fed generator (DSBDFG) with magnetic-barrier rotor structure is put forward for application in wind power. Compared with a doubly-fed induction generator, the DSBDFG has virtues of high reliability and low maintenance costs because of elimination of brush and sliprings components. Therefore, the proposed structure has tremendous potential as a wind power generator to apply in wind power. According to the operating principle of electric machine, the DSBDFG is studied in wind power application. At first, the topology, the winding connecting, the rotor structure, the power flow chart of different operating models and the variable speed capability of electric machine are discussed and analyzed. Then, a 50 kW DSBDFG is designed. Based on the principal dimension of the design electric machine, the electromagnetic characteristics of the DSBDFG with different running modes are analyzed and calculated to adopt the numerical method. From the result, it meets the requests of electromagnetic consistency and winding connecting in the design electric machine. Meanwhile, it confirms the proposed DSBDFG has the strong ability of speed regulation.
Źródło:
Archives of Electrical Engineering; 2023, 72, 4; 1073--1087
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of errors in on-wafer measurements due to multimode propagation in CB-CPW
Autorzy:
Lewandowski, A.
Wiatr, W.
Powiązania:
https://bibliotekanauki.pl/articles/307779.pdf
Data publikacji:
2005
Wydawca:
Instytut Łączności - Państwowy Instytut Badawczy
Tematy:
on-wafer measurements
multimode propagation
error analysis
conductor-backed coplanar waveguide (CB-CPW)
microstrip-like mode
numerical electromagnetic analysis
on-wafer probe
calibration
de-embedding
monolithic microwave integrated circuit (MMIC)
Opis:
We study for the first time errors in on-wafer scattering parameter measurements caused by the parasitic microstrip-like mode propagation in conductor-backed coplanar waveguide (CB-CPW). We determine upper bound for these errors for typical CPW devices such as a matched load, an open circuit, and a transmission line section. To this end, we develop an electromagnetic-simulations-based multimode three-port model for the transition between an air-coplanar probe and the CB-CPW. Subsequently, we apply this model to examine errors in the device S parameters de-embedded from measurements affected by the parasitic MSL mode. Our analysis demonstrates that the multimode propagation in CB-CPW may significantly deteriorate the S-parameters measured on wafer.
Źródło:
Journal of Telecommunications and Information Technology; 2005, 2; 16-22
1509-4553
1899-8852
Pojawia się w:
Journal of Telecommunications and Information Technology
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of electromagnetic performance of the interior permanent magnet brushless DC motor with stator slot skewed structure based on quasi-3D moving electromagnetic-field circuit coupling calculation
Autorzy:
Gan, Xue-Gui
Fan, Zhen-Nan
Li, Jing-Can
Powiązania:
https://bibliotekanauki.pl/articles/2042795.pdf
Data publikacji:
2022
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
interior permanent magnet brushless DC motor
quasi-three-dimensional electromagnetic-field circuit coupling analysis
stator slot skew
Opis:
This paper takes a 50 kW interior permanent magnet brushless DC motor as an example, and explores the influence of the degree of stator slot skew on the overall motor magnetic density and air gap magnetic density; then reveals the influences of stator slot skewed structure on a series of key electromagnetic properties like no-load back electromotive force (B-EMF), cogging torque, electromagnetic torque, torque fluctuation, electromagnetic loss, input power, output power and operating efficiency. On this basis, a relatively best range of the skew degrees is obtained. The research work in this paper has direct reference value for the further improvement of design and manufacture, operation and maintenance, control and protection of such motors.
Źródło:
Archives of Electrical Engineering; 2022, 71, 1; 159-174
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation of the magnetostrictive actuator transients
Autorzy:
Idziak, P.
Kowalski, K.
Nowak, L.
Barlak, M.
Pochrybniak, C.
Powiązania:
https://bibliotekanauki.pl/articles/377166.pdf
Data publikacji:
2015
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
actuators
magnetostriction
electromagnetic field
transient analysis
Opis:
The paper deals with a magnetostrictive fast-acting actuator applied as a driving device for plasma valve. The actuator is characterized by a relatively small displacement (les then 0.1 mm), but with a very short response time – below 0.1 ms. System is designed for so called “high intensity plasma pulses gun” which is applied in the area of plasma physics and material engineering [1]. A structure with an axisymmetrical actuator energised by discharged pulses of a capacitor has been proposed. The field-circuit mathematical model of the dynamic operation of the actuator has been applied. The model includes: the equation of transient electromagnetic field in a non-linear ferromagnetic material and equation of electric circuit. Using the Borland Delphi 9.0 environment, the computer software has been elaborated. Results of simulation are presented.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2015, 83; 23-30
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analytical solution for certain nonlinear electromagnetic field problems
Autorzy:
Sowa, M.
Spałek, D.
Powiązania:
https://bibliotekanauki.pl/articles/377744.pdf
Data publikacji:
2012
Wydawca:
Politechnika Poznańska. Wydawnictwo Politechniki Poznańskiej
Tematy:
electromagnetic field
analytical solution
nonlinear analysis
Opis:
The paper presents a nonlinear electromagnetic field problem with cylindrical symmetry. A time-sinusoidal boundary condition is applied, which yields non-sinusoidal steady-state fields. The problem is brought forth to test an analytical-numerical method based on the method of small parameter. A distinctive feature of this method is that it requires symbolic calculations to be performed. These allow to reduce the problem to a system of nonlinear equations. In order to check the accuracy of the solution, several error criteria are introduced. Moreover, the power balance of a nonlinear conductive region is verified.
Źródło:
Poznan University of Technology Academic Journals. Electrical Engineering; 2012, 69; 49-56
1897-0737
Pojawia się w:
Poznan University of Technology Academic Journals. Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Masso-stoimostnye zavisimosti prostranstvennykh indukcionnykh preobrazovatelejj s aksialnym shtampopressovannym i vitym magnitoprovodami
Mass value on the spatial induction converter with axially stamp-pressed and twisted magnetic circuits
Autorzy:
Sadovoy, A.
Powiązania:
https://bibliotekanauki.pl/articles/77944.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
target function
electromagnetic processe
material consumption
harmonic analysis
calculation model
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 2
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Sravnitelnyjj analiz materialoemkosti variantov trekhfaznykh prostranstvennykh elektromagnitnykh sistem
The comparing analysis of material consumption of three – phased spatial electromagnetic systems variants
Autorzy:
Plakhtyr, O.
Powiązania:
https://bibliotekanauki.pl/articles/76674.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
magnetic core
magnetic flux
material consumption
spatial analysis
electromagnetic system
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 2
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Improved algorithm for periodic steady-state analysis in nonlinear electromagnetic devices
Autorzy:
Sobczyk, T. J.
Radzik, M.
Powiązania:
https://bibliotekanauki.pl/articles/201260.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electromagnetic devices
steady-state analysis
periodic solutions
analysis in time domain
discrete differential operator
iterative algorithms
Opis:
This paper presents the improved methodology for the direct calculation of steady-state periodic solutions for electromagnetic devices, as described by nonlinear differential equations, in the time domain. A novel differential operator is developed for periodic functions and the iterative algorithm determining periodic steady-state solutions in a selected set of time instants is identified. Its application to steady-state analysis is verified by an elementary example. The modified algorithm reduces the complexity of steady-state analysis, particularly for electromagnetic devices described by high-dimensional nonlinear differential equations.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2019, 67, 5; 863-869
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Structure recognition of conductive materials utilizing FE-algorithms of non-destructive eddy-current testing
Rozpoznawanie struktury materiałów przewodzących przy wykorzystaniu algorytmów defektoskopii wiroprądowej opartych na MES
Autorzy:
Gawrylczyk, K.
Kugler, M.
Powiązania:
https://bibliotekanauki.pl/articles/156974.pdf
Data publikacji:
2007
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
elektromagnetyzm
metoda elementów skończonych
pola elektromagnetyczne
electromagnetism
finite element analysis
electromagnetic fields
Opis:
The paper deals with progress in electromagnetic methods used for structure evaluation of conducting materials. The term "electromagnetic methods" covers the following areas: magneto-inductive methods, magnetic leakage flux probe method, magnetometer principle and eddy-current methods. In 6948 the German visionary Friedrich Förster established his own company and developed highly sensitive measuring devices for magnetic fields at the Kaiser-Wilhelm-Institute. The methods and examples described in this paper relate only to eddy-current method, but the same idea may be applied for other methods, indeed. For the aim of inner structure recognition the sensitivity analysis with finite elements is proposed.
Praca dotyczy postępu w elektromagnetycznych metodach badania struktur przewodzących. Od roku 1948, gdy niemiecki wizjoner Friedrich Förster rozpoczął badania w Instytucie Cesarza Wilhelma w badaniach tych nastąpił wielki rozwój. Metody i przykłady opisane w niniejszej pracy odnoszą się jedynie do wiroprądowych badań materiałów, jednak przedstawiona idea może być łatwo przeniesiona do innych metod elektromagnetycznych. Opiera się ona na analizie układu pomiarowego metodą elementów skończonych, a następnie na przeprowadzeniu zadania odwrotnego umożliwiającego identyfikację struktury wewnętrznej materiału. Efektywne przeprowadzenie takiego zadania wymaga dostarczenia informacji o gradiencie funkcji celu, do czego wykorzystywana jest analiza wrażliwościowa wielkości pola elektromagnetycznego. Metody tej analizy, dobrze poznane i opisane w teorii obwodów elektrycznych, są dopiero rozwijane dla pól elektromagnetycznych. Zadania odwrotne prowadzą zwykle do źle uwarunkowanych, nadokreślonych układów równań. Uzyskane rozwiązanie jest często wynikiem kompromisu możliwej do uzyskania rozdzielczości w stosunku do użytych danych pomiarowych obciążonych błędami. Zastosowanie regularyzacji pozwala uzyskać zbieżność algorytmu nawet w takich przypadkach.
Źródło:
Pomiary Automatyka Kontrola; 2007, R. 53, nr 6, 6; 14-17
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Corona Modeling for the Transient Analysis, Steady State and Corona Loss Performance of Transmission Lines
Autorzy:
Saied, M. M.
Powiązania:
https://bibliotekanauki.pl/articles/262685.pdf
Data publikacji:
2013
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie
Tematy:
corona
power transmission lines
electromagnetic modeling
computer simulation
losses
transient analysis
shunt compensation
optimization
Opis:
This paper addresses the steady state analysis and the electromagnetic transients of overhead power transmission lines exhibiting corona. After a brief survey of the currently available modeling techniques, an alternative approach to the simulation of the corona discharge is presented. It is based on adding voltage-dependent current sources at prespecified nodes within the line’s lumped, ladder-shaped, equivalent circuit including an aduqate number of sections. The characteristics of these current sources can be determined using the usually available corona power loss measurements under power frequency sinusoidal voltage conditions. The line model is used for finding its transient response using time domain techniques. Several voltage excitation waveforms and magnitudes as well as different line’s loading conditions are investigated. As a further application of the suggested approach, the minimizion of the total corona losses of a long shunt compensated line will be considered as an additional criterion in the process of identifying the appropriate rating and location of the compensating coil primarily used for improving the line’s voltage profile.
Źródło:
Electrical Power Quality and Utilisation. Journal; 2013, 16, 2; 11-20
1896-4672
Pojawia się w:
Electrical Power Quality and Utilisation. Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
FE analysis of current displacement phenomena in a squirrel cage motor working at cryogenic temperature
Autorzy:
Barański, M.
Powiązania:
https://bibliotekanauki.pl/articles/950666.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
FE analysis of submerged induction motor
cryogenic temperature
coupled electromagnetic-thermal phenomena
current displacement
Opis:
The paper presents the special software for transient FE analysis of coupled electromagnetic-thermal problems in a squirrel cage submerged motor working at cryogenic temperature. A time-stepping finite element method and transients analysis of an induction motor has been applied. The non-linearity of the magnetic circuit, the movement of the rotor, skewed slots, and the influence of temperature on electric and thermal properties of the materials has been taken into account. Developed on the basis of presented algorithm a computer program used to analyze the phenomenon of current displacement in the rotor bars of high-voltage cage induction motor working in cryogenic conditions. The results of the simulations are presented.
Źródło:
Archives of Electrical Engineering; 2014, 63, 2; 139-147
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fusing the electromagnetic articulograph, high-speed video cameras and a 16-channel microphone array for speech analysis
Autorzy:
Mik, Ł.
Lorenc, A.
Król, D.
Wielgat, R.
Święciński, R.
Jędryka, R.
Powiązania:
https://bibliotekanauki.pl/articles/200263.pdf
Data publikacji:
2018
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electromagnetic articulography
microphone array
vision system
speech analysis
artykulograf elektromagnetyczny
system wizyjny
analiza mowy
Opis:
Electromagnetic articulography (EMA) is one of the instrumental phonetic research methods used for recording and assessing articulatory movements. Usually, articulographic data are analysed together with standard audio recordings. This paper, however, demonstrates how coupling the articulograph with devices providing other types of information may be used in more advanced speech research. A novel measurement system is presented that consists of the AG 500 electromagnetic articulograph, a 16-channel microphone array with a dedicated audio recorder and a video module consisting of 3 high-speed cameras. It is argued that synchronization of all these devices allows for comparative analyses of results obtained with the three components. To complement the description of the system, the article presents innovative data analysis techniques developed by the authors as well as preliminary results of the system’s accuracy.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2018, 66, 3; 257-266
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modal-frequency spectrum of magnetic flux density in air gap of permanent magnet motor
Autorzy:
Witczak, P.
Kubiak, W.
Lefik, M.
Szulakowski, J.
Powiązania:
https://bibliotekanauki.pl/articles/140681.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electromagnetic fields
waves permanent magnet machines
air gap magnetic flux
spectral analysis
finite element method
Opis:
The classic relationships concerning the harmonic content in the air gap field of three-phase machines are presented in form of series of rotating waves. The same approach is applied to modeling of permanent magnet motors with fractional phase windings. All main reasons of non-sinusoidal shape of flux density distribution, namely, magnets’ shape and their placement, slotting, magnetic saturation and eccentricity are also related to their counterparts in modal-frequency spectrum. The Fourier 2D spectrum of time-stepping finite element solution is confronted with results of measurements, with special attention paid to accuracy of both methods.
Źródło:
Archives of Electrical Engineering; 2014, 63, 1; 29-46
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Vozbuzhdenie kolebanijj v prizmaticheskom rezonatore s pomoshh'ju prjamougol'nogo volnovoda
Excitation of oscillations in prismatic cavity by rectangular waveguide
Autorzy:
Potapskijj, P.
Garasimchuk, I.
Panzir, Y.
Powiązania:
https://bibliotekanauki.pl/articles/76427.pdf
Data publikacji:
2015
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
electromagnetic field
pathogenic bacteria
respiratory tract
fungal disease
skin disease
sorting
classification
wool
heating process
theoretical analysis
Źródło:
Motrol. Motoryzacja i Energetyka Rolnictwa; 2015, 17, 5
1730-8658
Pojawia się w:
Motrol. Motoryzacja i Energetyka Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Diagnostyka maszyn wirnikowych oparta na modelu
Model based diagnostics of rotating machinery
Autorzy:
Bednarz, J.
Uhl, T.
Piłat, A.
Powiązania:
https://bibliotekanauki.pl/articles/329072.pdf
Data publikacji:
2007
Wydawca:
Polska Akademia Nauk. Polskie Towarzystwo Diagnostyki Technicznej PAN
Tematy:
analiza modalna
model NARX
diagnostyka
maszyna wirnikowa
wzbudnik elektromagnetyczny
modal analysis
NARX models
rotating machinery diagnostics
electromagnetic exciter
Opis:
Jednym z poważnych uszkodzeń występujących w turbogeneratorach jest zmęczeniowe pękanie łopatek. W pracy przedstawiony jest proponowany algorytm diagnostyczny oparty na metodzie OMA i OMAX oraz modelach NARX umożliwiający detekcję pękania łopatek oraz jego eksperymentalna weryfikacja na stanowisku laboratoryjnym AGH. W pracy zaprezentowano również zastosowanie wzbudnika elektromagnetycznego jako mierzalnego wymuszenia w metodzie OMAX i EMA.
Paper concerns detection and identification of turbine blade cracking by means of the modal analysis method and NARX model based damage detection technique. In the paper there is presented the algorithm of the NARX method and modal model based diagnostic process, method applicability to structural health monitoring of rotating machinery as well as method experimental verification carried out for data measured on the laboratory test stand. The idea of using an electromagnetic exciter as measurable excitation in OMAX method is also presented.
Źródło:
Diagnostyka; 2007, 3(43); 25-34
1641-6414
2449-5220
Pojawia się w:
Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of analysis and evaluation of electromagnetic radiation during tests of electromagnetic compatibility (EMC) of motor vehicles, in particular electrically driven. Part II. Analysis of the electromagnetic radiation of selected electric vehicles (EV)
Metody analizy i oceny promieniowania elektromagnetycznego w badaniach kompatybilności elektromagnetycznej (EMC) pojazdow samochodowych zwłaszcza elektrycznych. Część II. Analiza promieniowania elektromagnetycznego wybranych pojazdów elektrycznych – EV
Autorzy:
Łukjanow, S.
Burliński, R.
Powiązania:
https://bibliotekanauki.pl/articles/263305.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
electric vehicle testing
electromagnetic compatibility of motor vehicles
analysis of EMC tests
electromagnetic radiation of vehicles
EV
EMC
EMR
badania pojazdów elektrycznych
EMC pojazdów samochodowych
analiza badań EMC
promieniowanie elektromagnetyczne pojazdów
Opis:
The article discusses electromagnetic compatibility (EMC) requirements for motor vehicles and their equipment and electromagnetic radiation (EMR) testing methods based on the normative documents that provide grounds for approving specific vehicle types for production and operation (type approval). The normative documents are UN ECE Regulation No 10 and Directive 72/245/EEC. Three groups of methods (line methods, area-related methods, and parameter estimation methods) have been proposed and described for the EMR assessment of vehicles. Based on the EMR tests carried out at PIMOT on a few electric vehicles (EV), the EMR of the vehicles was analysed and assessed with using some of the said methods. The following vehicles were used for the analyses and calculations: OPEL Ampera, RENAULT Fluence, CITROEN C-Zero, and MEGA e-City. The analysis and calculations carried out have revealed a close similarity between the usability of the proposed methods of EMR assessment of motor vehicles. The qualitative optimization of the parameters that can influence the assessment, primarily a reduction in the electromagnetic radiation (EMR) of the vehicle under consideration, will not only result in correct functioning of the vehicle, especially if it is electrically driven, but also will help to avoid possible harmful impact of EMR on vehicle occupants’ health. The work outputs may be utilized and disseminated, especially by the designers and researchers who are involved in work on motor vehicles, in particular EVs, where lots of electronic systems and modules are present.
W artykule zostały omówione wymagania kompatybilności elektromagnetycznej (EMC) dla pojazdów i urządzeń samochodowych oraz metody badań promieniowania elektromagnetycznego (PEM) w oparciu o dokumenty normatywne stanowiące podstawę dopuszczenia do produkcji i ruchu (homologacja) danego pojazdu. Dokumentami tymi są Regulamin nr 10 EKG ONZ oraz Dyrektywa 72/245/ EWG. Dla oceny PEM pojazdów zostały zaproponowane i opisane trzy grupy metod: liniowe, polowe i estymacji parametrów. Na podstawie przeprowadzonych w PIMOT badań kilku samochodów elektrycznych w zakresie PEM przeprowadzono analizę i ocenę wg wybranych metod. Do analizy i obliczeń wykorzystano następujące pojazdy: OPEL Ampera, RENAULT Fluence, CITROEN C-Zero i MEGA e-City. Przeprowadzona analiza i obliczenia wykazały dużą zbieżność przydatności zaproponowanych metod oceny PEM pojazdów samochodowych. Zapewnienie wysokich jakościowo parametrów wpływających na ocenę, w tym przede wszystkim promieniowania elektromagnetycznego (PEM) ma wpływ nie tylko na poprawne działanie pojazdu, szczególnie EV, ale też na zdrowie przebywających wewnątrz: kierowcy i pasażerów. Wyniki pracy mogą być wykorzystane i rozpowszechniane szczególnie przez konstruktorów i badaczy pojazdów samochodowych, zwłaszcza EV, w których występują duże ilości systemów i modułów elektronicznych.
Źródło:
Archiwum Motoryzacji; 2018, 81, 3; 39-64
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania mikronizacji węgla kamiennego w młynie elektromagnetycznym
Micronization studies of hard coal with use of electromagnetic mill
Autorzy:
Micorek, T.
Rejdak, M.
Robak, J.
Różycki, G.
Powiązania:
https://bibliotekanauki.pl/articles/109208.pdf
Data publikacji:
2016
Wydawca:
AXIS MEDIA
Tematy:
mikronizacja
badanie
węgiel kamienny
młyn elektromagnetyczny
analiza regresji wielokrotnej
mielenie
micronization
study
coal
electromagnetic mill
multiple regression analysis
grinding
Opis:
Energetyczne wykorzystanie odpadów może przynieść wiele korzyści środowiskowych przy dodatnim efekcie finansowym. Głównymi wyzwaniami technologicznymi, związanymi z przeróbką odpadów na paliwo, są: odseparowanie frakcji niepalnych oraz wysoko chlorowanych, rozdrobnienie oraz homogenizacja. Wytworzone paliwo powinno charakteryzować się parametrami spełniającymi kryteria ustanowione przez Europejski Komitet Normalizacyjny (CEN). Technologia energetycznego wykorzystania paliwa typu SRF (Solid Recovered Fuel) determinuje wymogi dotyczące właściwości fizykochemicznych oraz użytkowych paliwa, a tym samym decyduje o wyborze technologii jego przygotowania.
The paper presents the results of the test of wet grinding of coal with use of electromagnetic mill. The tests were carried out in a batch system at different initial grain sizes of raw material, various coal concentrations in the feed and the various milling times. Based on the multiple regression analysis of the obtained data, it can be concluded that the efficiency of coal grinding wit use of electromagnetic mill depends on the residence time of the particles in the mill working chamber and a solid phase concentration in the feed directed to the process.
Źródło:
Piece Przemysłowe & Kotły; 2016, 4; 27-33
2082-9833
Pojawia się w:
Piece Przemysłowe & Kotły
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Methods of analysis and evaluation of electromagnetic radiation during tests of electromagnetic compatibility (EMC) of motor vehicles, in particular electrically driven. Part I, Requirements and methods of EMC testing of motor vehicles
Metody analizy i oceny promieniowania elektromagnetycznego w badaniach kompatybilności elektromagnetycznej (EMC) pojazdów samochodowych zwłaszcza elektrycznych. Część I, Wymagania i metody badań EMC pojazdów samochodowych
Autorzy:
Łukjanow, S.
Burliński, R.
Powiązania:
https://bibliotekanauki.pl/articles/1363321.pdf
Data publikacji:
2018
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
electric vehicle (EV) testing
electromagnetic compatibility (EMC) of motor vehicles
analysis of EMC tests
electromagnetic radiation (EMR) of vehicles
badania pojazdów elektrycznych (EV)
EMC pojazdów samochodowych
analiza badań
EMC
promieniowanie elektromagnetyczne pojazdów
Opis:
The article discusses electromagnetic compatibility (EMC) requirements for motor vehicles and their equipment and electromagnetic radiation (EMR) testing methods based on the normative documents that provide grounds for approving specific vehicle types for production and operation (type approval). The normative documents are UN ECE Regulation No 10 and Directive 72/245/EEC. Three groups of methods (line methods, area methods, and parameter estimation methods) have been proposed and described for the EMR assessment of vehicles. Based on the EMR tests carried out at PIMOT on a few electric vehicles (EV), the EMR of the vehicles was analysed and assessed with using some of the said methods. The following vehicles were used for the analyses and calculations: OPEL Ampera, RENAULT Fluence, Citroen C-Zero, and Mega e-City. The analysis and calculations carried out have revealed a close similarity between the proposed methods of EMR assessment of motor vehicles. The qualitative optimization of the parameters that can influence the assessment, primarily a reduction in the electromagnetic radiation (EMR) of the vehicle under consideration, will not only result in correct functioning of the vehicle, especially if it is electrically driven, but also will help to avoid possible harmful impact of EMR on vehicle occupants’ health. The work outputs may be utilized and disseminated, especially by the designers and researchers who are involved in work on motor vehicles, in particular EVs, where lots of electronic systems and modules are present. In consideration of the size if this publication, it had to be divided into two parts. In the first one, the EMC requirements and the relevant motor vehicle test methods have been described. The second one presents an analysis of the electromagnetic radiation of selected electric vehicles.
W artykule zostały omówione wymagania kompatybilności elektromagnetycznej (EMC) dla pojazdów i urządzeń samochodowych oraz metody badań promieniowania elektromagnetycznego (PEM) w oparciu o dokumenty normatywne stanowiące podstawę dopuszczenia do produkcji i ruchu (homologacja) danego pojazdu. Dokumentami tymi są Regulamin nr 10 EKG ONZ oraz Dyrektywa 72/245/EWG. Dla oceny PEM pojazdów zostały zaproponowane i opisane trzy grupy metod: liniowe, polowe i estymacji parametrów. Na podstawie przeprowadzonych w PIMOT badań kilku samochodów elektrycznych w zakresie PEM przeprowadzono analizę i ocenę wg wybranych metod. Do analizy i obliczeń wykorzystano następujące pojazdy: OPEL Ampera, RENAULT Fluence, CITROEN C-Zero i MEGA e-City. Przeprowadzona analiza i obliczenia wykazały dużą zbieżność przydatności zaproponowanych metod oceny PEM pojazdów samochodowych. Zapewnienie wysokich jakościowo parametrów wpływających na ocenę, w tym przede wszystkim promieniowania elektromagnetycznego (PEM) ma wpływ nie tylko na poprawne działanie pojazdu, szczególnie EV, ale też na zdrowie przebywających wewnątrz: kierowcy i pasażerów. Wyniki pracy mogą być wykorzystane i rozpowszechniane szczególnie przez konstruktorów i badaczy pojazdów samochodowych, zwłaszcza EV, w których występują duże ilości systemów i modułów elektronicznych. Ze względu na objętość materiału praca została podzielona na dwie części. W pierwszej części opisano wymagania i metody badań EMC pojazdów samochodowych. W drugiej dokonano analiza promieniowania elektromagnetycznego wybranych pojazdów elektrycznych – EV.
Źródło:
Archiwum Motoryzacji; 2018, 80, 2; 77-94
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Probability of detection analyses of eddy current data for the detection of corrosion
Prawdopodobieństwo detekcji w wykrywaniu korozji metodą prądów wirowych
Autorzy:
Yusa, N.
Tomizawa, T.
Song, H.
Hashizume, H.
Powiązania:
https://bibliotekanauki.pl/articles/107927.pdf
Data publikacji:
2018
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
electromagnetic nondestructive evaluation
uncertainty
statistical analysis
ferromagnetic plate
artificial corrosion
elektromagnetyczne badania nieniszczące
niepewność
analiza statystyczna
płyta ferromagnetyczna
sztuczna korozja
Opis:
This study evaluated the applicability of probability of detection (POD ) analyses to eddy current tests for the detection of corrosions. Forty-three ferromagnetic plates with various corrosions were prepared, and eddy current inspections were performed to gather signals due to the corrosions using an absolute type pancake probe. The probe scanned the surface of the plates two-dimensionally with a constant lift-off to simulate nondestructive inspection of corrosion under insulating coatings. Subsequent POD analyses adopted two models: a conventional one wherein a flaw was characterized using a single parameter, and a multi-parameter model based on the combinational use of numerical simulations and measurements. The analyses demonstrated that the conventional model would overestimate the probability of detecting small corrosions. In contrast, the multi-parameter model characterized POD more reasonably while its confidence interval was comparable to that of the conventional model.
Dokonano oceny przydatności analiz prawdopodobieństwa wykrywania (POD ) do wykrywania korozji na podstawie badań metodą prądów wirowych. Przygotowano czterdzieści trzy płytki ferromagnetyczne z różnym stanem skorodowania. Następnie przeprowadzono inspekcje metodą prądów wirowych i zebrano sygnały uzależnione od korozji za pomocą absolutnych sond typu „pancake coil”. Sonda skanowała powierzchnie płyt w dwóch wymiarach na stałej wysokości nad materiałem, tak by zasymulować nieniszczącą inspekcję korozji w elementach pokrytych powłokami izolacyjnymi. W kolejnych etapach analizy POD przyjęto dwa modele: konwencjonalny, w którym wada była charakteryzowana za pomocą pojedynczego parametru, a także model wieloparametrowy oparty na kombinacyjnym zastosowaniu symulacji numerycznych i pomiarów. Analizy wykazały, że model konwencjonalny prowadził do przeszacowania prawdopodobieństwa wykrycia małych korozji. Natomiast model wieloparametrowy charakteryzował POD bardziej racjonalnie, a jego przedział ufności był podobny jak w przypadku modelu konwencjonalnego.
Źródło:
Badania Nieniszczące i Diagnostyka; 2018, 4; 3-7
2451-4462
2543-7755
Pojawia się w:
Badania Nieniszczące i Diagnostyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analiza zjawiska wypierania prądu w silniku indukcyjnym pracującym w temperaturze kriogenicznej
Analysis of Current Displacement Phenomena in a Squirrel Cage Motor Working at Cryogenic Temperature
Autorzy:
Barański, M.
Powiązania:
https://bibliotekanauki.pl/articles/1368739.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
wysokonapięciowy silnik klatkowy
temperatura kriogeniczna
wypieranie prądu
analiza
FE analysis of submerged induction motor
cryogenic temperature
coupled electromagnetic-thermal phenomena
current displacement
Opis:
The paper presents an algorithm for transient FE analysis of coupled electromagnetic-thermal phenomena in a squirrel cage submerged motor working at cryogenic temperature. The non-linearity of the magnetic circuit, the movement of the rotor, skewed slots, and the influence of temperature on electric and thermal properties of the materials has been taken into account. Developed on the basis of presented algorithm a computer program used to analyze the phenomenon of current displacement in the rotor bars of high-voltage cage induction motor working in cryogenic. The results of the simulations are presented.
W artykule przedstawiono polowy algorytm analizy sprzężonych zjawisk elektromagnetycznych, cieplnych i mechanicznych w silniku indukcyjnym. W rozważaniach uwzględniono skos żłobków, nasycanie się ferromagnetyka oraz wpływ temperatury na właściwości elektryczne, cieplne i magnetyczne materiałów. Opracowany na jego podstawie program obliczeniowy wykorzystano do analizy zjawiska wypierania prądu w prętach uzwojenia klatkowego wysokonapięciowego silnika indukcyjnego pracującego w warunkach kriogenicznych. Przedstawiono wybrane rezultaty badań oraz wynikające z nich wnioski.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2013, 4, 100/2; 9-12
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Problemy eksploatacji silników indukcyjnych z asymetrią elektromagnetyczną – wybrane przypadki
Problems of operation of induction motors with electromagnetic asymmetry - selected cases
Autorzy:
Petryna, J.
Sułowicz, M.
Guziec, K.
Powiązania:
https://bibliotekanauki.pl/articles/1201828.pdf
Data publikacji:
2016
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
asymetria elektromagnetyczna
silnik indukcyjny
analiza widmowa prądu
strumienia
drgań i hałasu
electromagnetic asymmetry
induction motor
spectral analysis of current
flux
vibration and noise
Opis:
The study analyzed several cases of adverse events associated with the operation of induction motors with electromagnetic asymmetry. These phenomena, of various origin, often overlap, making it difficult to diagnose. A high power low speed motor, emitting a specific noise which intensity increased with increasing load, was considered. To explain the reasons for the phenomenon, in addition to the current measurement in the dynamic and steady states, a unipolar flux and mechanical vibrations measurements were applied because the current measurement did not give a completely clear answer as to the cause of the problem. The test results indicated a defect in the rotor cage with a possible simultaneous short circuit insi de the rotor sheet package. In turn, at the testing station two identical 6 kV motors which operation suggested symptoms of internal electromagnetic asymmetry by a specific sound, were subjected to the tests. Similarly, the measurements of current, flux, noise and vibration were carried out. In case of one of the motors the analysis of the filtered start-up current in the form of characteristic modulation pointed to the initial degradation of the cage and/or some short circuit of a portion of the rotor sheet package, what would the soundeffects indicate. In the second case, the shape of the filtered start-up current radically differed from the known standard pattern, typical for the cage defect. The specific changes to the diagnostic signal may indicato a serious problem in the rotor, for example a total degradation of the package due to a wide range short circuits inside.
W pracy przeanalizowano kilka przypadków negatywnych zjawisk towarzyszących eksploatacji silników indukcyjnych z asymetrią elektromagnetyczną. Zjawiska te, rozmaitego pochodzenia, nieraz nakładają się na siebie, utrudniając diagnozę. Rozpatrzono pracę silnika niskoobrotowego dużej mocy, emitującego specyficzny hałas, którego intensywność wzrastała w miarę zwiększania obciążenia. Aby wyjaśnić przyczyny zjawiska, oprócz pomiaru prądu w stanach dynamicznym i stanie ustalonym zastosowano pomiar strumienia unipolarnego oraz drgań mechanicznych, ponieważ sam pomiar prądu nie dawał całkowicie jednoznacznej odpowiedzi co do przyczyn problemu. Wyniki badań wskazały na defekt klatki z możliwym jednoczesnym zwarciem blach pakietu wirnika. Z kolei na stacji prób poddano badaniom 2 jednakowe silniki 6kV, których praca sugerowała także symptomy wewnętrznej asymetrii elektromagnetycznej poprzez specyficzny dźwięk. Tu podobnie dokonano pomiarów prądu, strumienia i drgań. W przypadku jednego z silników analiza odfiltrowanego prądu rozruchowego w postaci charakterystycznych modulacji wskazała na początkową degradację klatki i/lub ewentualne zwarcie części blach pakietu wirnika, na co wskazywałyby efekty akustyczne. W drugim przypadku kształt odfiltrowanego prądu rozruchowego diametralnie odbiegał od znanego wzorca, typowego dla defektu klatki. Specyficzne zmiany sygnału diagnostycznego mogą wskazywać na poważniejszy problem w wirniku, np. całkowitą degradację pakietu spowodowaną zwarciami o szerokim zasięgu.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2016, 1, 109; 161-168
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of the magnetization direction on the static and dynamic parameters of an electromagnetic linear actuator
Badanie wpływu kierunku magnesowania na własności statyczne i dynamiczne liniowego przetwornika elektromechanicznego
Autorzy:
Just, K.
Piskur, P.
Powiązania:
https://bibliotekanauki.pl/articles/210116.pdf
Data publikacji:
2018
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
modelowanie i symulacja
napęd elektromagnetyczny
metoda elementów skończonych
analiza pola elektromagnetycznego
tablica Halbacha
modelling and simulation
electromagnetic actuator
finite element method
field analysis
Halbach array
Opis:
This paper presents a simulation analysis of the impact of magnetization direction on the static and dynamic parameters of an electromagnetic linear actuator. The simulation analysis computations were completed for three different magnetization configurations of permanent magnets (i.e. axial, radial, and a Halbach array). The finite element method (FEM) was applied which provided a good representation of the properties of actual physical objects. The computations enabled an investigation into and an assessment of the impact of the runner magnetization method on the static and dynamic properties of the drive.
W artykule przedstawiono analizę wpływu kierunku magnesowania magnesów trwałych na charakterystyki statyczne oraz dynamiczne liniowego przetwornika elektromechanicznego. Obliczenia symulacyjne przeprowadzono dla trzech różnych konfiguracji kierunku magnesowania magnesów trwałych (osiowej, promieniowej oraz tzw. tablicy Halbacha). W obliczeniach wykorzystano metodę elementów skończonych (MES), której zastosowanie zapewnia dobre odwzorowanie własności rzeczywistego obiektu. Przeprowadzone obliczenia pozwoliły na zbadanie i ocenę wpływu kierunku magnetyzacji biegnika na własności statyczne oraz dynamiczne napędu.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2018, 67, 2; 77-87
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design and analysis of interior composite-rotor bearingless permanent magnet synchronous motors with two layer permanent magnets
Autorzy:
Sun, X.
Su, B.
Chen, L.
Yang, Z.
Li, K.
Powiązania:
https://bibliotekanauki.pl/articles/200490.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
bearingless motor
permanent magnet motor
finite element analysis
cogging torque
static electromagnetic characteristics
silnik z magnesem trwałym
analiza elementów skończonych
moment skręcający
właściwości elektromagnetyczne
silnik bezłożyskowy
Opis:
In this paper, a new type of interior composite-rotor bearingless permanent magnet synchronous motors (BPMSMs) with two layer permanent magnets (PMs) is proposed. In order to reduce the torque ripple of this kind of motors, the sizes of PMs are optimized. Moreover, the magnetic field analysis of the interior composite-rotor BPMSM with two layer PMs is carried out by the finite element method (FEM). The corresponding static electronic magnetic characteristics at no load, including magnetic field, PM flux linkage and inductance, are studied in detail. In addition, electromagnetic torque characteristics and suspension force characteristics are also investigated thoroughly. The results of the analysis and simulation lay a significant foundation for further research on the interior composite-rotor BPMSMs with two layer PMs.
Źródło:
Bulletin of the Polish Academy of Sciences. Technical Sciences; 2017, 65, 6; 833-843
0239-7528
Pojawia się w:
Bulletin of the Polish Academy of Sciences. Technical Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies