Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "electrical method" wg kryterium: Temat


Tytuł:
Study on Sm³⁺ and Er³⁺ co-doped CeO₂-based electrolytes
Autorzy:
Arabacı, A.
Powiązania:
https://bibliotekanauki.pl/articles/1054949.pdf
Data publikacji:
2017-09
Wydawca:
Polska Akademia Nauk. Instytut Fizyki PAN
Tematy:
electrical conductivity
electrolyte material
the cellulose templating (CT) method
co-doped ceria
Opis:
Ceria doped with aliovalent cations, such as rare earth oxides, has been considered as one of the most promising candidate electrolyte materials for intermediate temperature solid oxide fuel cells. In this study, high purity cerium nitrate, samarium nitrate and erbium nitrate salts were used to obtain ceria-based solid solutions Ce_{0.80}Sm_{0.20}O_{1.90} (SDC), Ce_{0.80}Sm_{0.15}Er_{0.05}O_{1.90} (ESDC5), Ce_{0.80}Sm_{0.10}Er_{0.10}O_{1.90} (ESDC10) through the cellulose templating method. Crystal structure and microstructure were characterized by means of X-ray diffraction and scanning electron microscopy, respectively. X-ray diffraction results indicate that a single-phase fluorite structure formed at a relatively low calcination temperature, 500°C. The relative densities of the sintered pellets were higher than 93%. The electrical properties of doped and co-doped ceria electrolytes in the temperature range 300-750°C were analyzed by using electrochemical impedance spectroscopy. The singly doped ceria at 750°C showed the highest ionic conductivity with less activation energy.
Źródło:
Acta Physica Polonica A; 2017, 132, 3; 458-460
0587-4246
1898-794X
Pojawia się w:
Acta Physica Polonica A
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Design of photonic crystal horn antenna for transverse electric modes
Autorzy:
Beiranvand, Ehsan
Danaie, Mohammad
Afsahi, Majid
Powiązania:
https://bibliotekanauki.pl/articles/1835804.pdf
Data publikacji:
2020
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
photonic crystal-based horn antenna
transverse electrical mode
FDTD method
Opis:
In this paper, by modifying defects in a photonic crystal lattice, a two-dimensional photonic crystal horn antenna is designed. The photonic crystal used for this purpose is composed of a hexagonal lattice of circular holes in a dielectric slab. The results of this paper allow us to design a photonic crystal antenna capable of separating TE and TM modes. The designed structure has a very simple design that allows low cost fabrication. The structure is numerically simulated using a finite-difference time-domain (FDTD) method. Its wide bandwidth, its low loss and the ability to transmit waves at a terahertz frequency range are the antenna’s main advantages. The return loss for the frequency range of 180 to 215 THz is from –6.63 to –28.3 dB. Moreover, a 35 THz bandwidth is obtained for this structure.
Źródło:
Optica Applicata; 2020, 50, 3; 401-413
0078-5466
1899-7015
Pojawia się w:
Optica Applicata
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A hybrid method for the optimal reactive power dispatch and the control of voltagesin an electrical energy network
Autorzy:
Benchabira, Aissa
Khiat, Mounir
Powiązania:
https://bibliotekanauki.pl/articles/140740.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrical energy network
interior point method (IPM)
optimal reactive power dispatch (ORPD)
particle swarm optimization (PSO)
Opis:
This paper presents the resolution of the optimal reactive power dispatch (ORPD) problem and the control of voltages in an electrical energy system by using a hybrid algorithm based on the particle swarmoptimization (PSO) method and interior point method (IPM). The IPM is based on the logarithmic barrier (LB-IPM) technique while respecting the non-linear equality and inequality constraints. The particle swarmoptimization-logarithmic barrier-interior point method (PSO-LB-IPM) is used to adjust the control variables, namely the reactive powers, the generator voltages and the load controllers of the transformers, in order to ensure convergence towards a better solution with the probability of reaching the global optimum. The proposed method was first tested and validated on a two-variable mathematical function using MATLAB as a calculation and execution tool, and then it is applied to the ORPD problem to minimize the total active losses in an electrical energy network. To validate the method a testwas carried out on the IEEE electrical energy network of 57 buses.
Źródło:
Archives of Electrical Engineering; 2019, 68, 3; 535-551
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Geophysical investigations of the Carpathian slide slopes
Autorzy:
Bestyński, Z.
Thiel, K.
Powiązania:
https://bibliotekanauki.pl/articles/1182874.pdf
Data publikacji:
2005
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
zbocze osuwiska
strefa poślizgu
metoda sejsmiki refrakcyjnej
metoda elektrooporowa
indeks KFG
współczynnik SMR
landslide slope
slide boundary
seismic refraction method
electrical resistance method
classification index KFG
Slope Mass Rating (SMR)
Opis:
W artykule omówiono zastosowanie metod geofizycznych w badaniu i prognozowaniu stateczności karpackich stoków. Przedstawiono podstawy fizyczne wykorzystania metody sejsmicznej refrakcyjnej i geoelektrycznej elektrooporowej dla rozpoznania geometrii istniejących osuwisk, w szczególności głębokości i przebiegu strefy poślizgu oraz poziomego zasięgu zsuwu. Wskazano na możliwość wykorzystania indeksu KFG geofizycznej klasyfikacji fliszu, po wprowadzeniu wskaźników korygujących zaproponowanych przez Romano, do wstępnej oceny i prognozy stateczności karpackich stoków. Przedstawiono przykłady zastosowania metody sejsmicznej refrakcyjnej i geoelektrycznej elektrooporowej do określenia przebiegu strefy poślizgu i poziomego zasięgu zsuwu osuwisk wykształconych na fliszowych zboczach Karpat. Doświadczenie zdobyte na podstawie badań ponad stu osuwisk, zlokalizowanych głównie na zboczach sztucznych zbiorników wodnych, wykorzystano w badaniu karpackich stoków osuwiskowych metodami geofizycznymi.
Źródło:
Polish Geological Institute Special Papers; 2005, 20; 35--39
1507-9791
Pojawia się w:
Polish Geological Institute Special Papers
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Evaluation of the Mechanical Properties of Gray Cast Iron Using Electrical Resistivity Measurement
Autorzy:
Bieroński, M.
Krasa, O.
Koza, M.
Książek, D.
Kuś, R.
Powiązania:
https://bibliotekanauki.pl/articles/380834.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
resistance
grey cast iron
tensile strength
NDT method
electrical resistivity
odporność
żeliwo szare
wytrzymałość na rozciąganie
metoda NDT
Opis:
In this paper an attempt to determine the relationship between the electrical resistivity and the tensile strength and hardness of cast iron of carbon equivalent in the range from 3.93% to 4.48%. Tests were performed on the gray cast iron for 12 different melts with different chemical composition. From one melt poured 6 samples. Based on the study of mechanical and electro-resistive determined variation characteristics of tensile strength, hardness and resistivity as a function of the carbon equivalent. Then, regression equations were developed as power functions describing the relationship between the resistivity of castings and their tensile strength and hardness. It was found a high level of regression equations to measuring points, particularly with regard to the relationship Rm=f(ρ). The obtained preliminary results indicate the possibility of application of the method of the resistance to rapid diagnostic casts on the production line, when we are dealing with repeatable production, in this case non variable geometry of the product for which it has been determinated before a regression equation.
Źródło:
Archives of Foundry Engineering; 2016, 16, 4; 29-32
1897-3310
2299-2944
Pojawia się w:
Archives of Foundry Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
System ekspertowy oceny stanu układów izolacyjnych transformatorów elektroenergetycznych z wykorzystaniem metody emisji akustycznej
Expert system for assessment of electric power transformer insulation systems using the acoustic emission method
Autorzy:
Boczar, T.
Frącz, P.
Powiązania:
https://bibliotekanauki.pl/articles/152181.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
metoda emisji akustycznej
wyładowania elektryczne
wyładowania niezupełne
system ekspercki
wysokonapięciowe systemy izolacyjne
acoustic emission method
electrical discharge
partial discharge
expert system
high-voltage insulation systems
Opis:
Tematyka niniejszego artykułu dotyczy doskonalenia praktycznych zastosowań metody emisji akustycznej (EA) w diagnostyce wysokonapięciowych układów izolacyjnych urządzeń elektroenergetycznych. W szczególności przedstawiono podstawowe założenia oraz opisano poszczególne elementy eksperckiego systemu diagnostycznego wykorzystującego metodę akustyczną do oceny stanu mierzonej izolacji transformatorów energetycznych, wykonywanej podczas ich normalnej pracy w warunkach przemysłowych.
The subject matter of this paper refers to the development of practical applications of the acoustic emission (EA) method to diagnostics of high-voltage insulation systems of power appliances, carried out during their regular operation in industrial conditions. First of all, basic assumptions are presented and the particular elements of the expert diagnostic system using AE method for the assessment of the condition of the electric power transformer insulation measured are described. Fig. 1 shows its block diagram in which the following modules can be distinguished: a measuring system (Figs. 2 and 3), a processing - analysing system, a knowledge base and a classifier. These modules are characterised successively in Section 2 of the paper. Special attention is given to the description of the group of multiparametric descriptors (Fig. 4) characterising the AE signals in the time, frequency and time-frequency domains, including descriptive statistics indexes and correlative parameters. Accordant descriptors make it possible, under strictly defined metrological conditions, to recognize basic partial discharge forms (PDs) that may occur in paper-oil insulation. In this way a catalogued knowledge base containing the so-called 'fingerprints' was created for basic types of high-voltage defects of insulation systems. The scope of the research work carried out in the Institute of Power Engineering, connected with a practical implementation of the system suggested, is characterised in the last section of the paper.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 2, 2; 104-107
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Zależność przenikalności elektrycznej krwi od liczby erytrocytów i leukocytów - badania w zakresie częstotliwości mikrofalowych
Dependence of blood electrical permittivity on red and white cells number - investigation in microwave frequency range
Autorzy:
Cicha-Mikołajczyk, A.
Galwas, B.
Pałko, T.
Powiązania:
https://bibliotekanauki.pl/articles/158080.pdf
Data publikacji:
2005
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
przenikalność elektryczna
metoda otwartej linii współosiowej
mikrofale
electrical permittivity of the blood
open-ended coaxial method
microwaves
Opis:
W artykule opisano badania własne, których celem była ocena dielektrycznych właściwości komórkowych elementów krwi człowieka w zakresie częstotliwości mikrofalowych (0,5-5,5) GHz. W badaniach wykorzystano metodę otwartej linii współosiowej do pomiaru przenikalności elektrycznej krwi. W toku doświadczeń stwierdzono istnienie zależności pomiędzy liczbą erytrocytów we krwi a przenikalnością elektryczną. Zaobserwowano spadek wartości przenikalności elektrycznej ze wzrostem liczby erytrocytów we krwi w całym zakresie pomiarowym. Jednocześnie zauważono brak korelacji pomiędzy liczbą leukocytów we krwi (w zakresie prawidłowych wartości liczby krwinek białych) a przenikalnością elektryczną.
The purpose of the presented work was the assessment of the dielectrical properties of the human blood cell elements in the microwave frequency range (0,5-5,5) GHz. In study was used of the open-ended coaxial method for measurement of electrical permittivity of the blood. It was observed that the amount of red blood cells changed the blood permittivity. Increasing of the red cells numbers decreases the blood permittivity, but influence of the white blood cells on the blood permittivity can be neglected.
Źródło:
Pomiary Automatyka Kontrola; 2005, R. 51, nr 4, 4; 16-18
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Porównanie naprężeń w kadłubie silnika elektrycznego o różnych wariantach układu chłodzenia cieczą dedykowanego do napędu autobusu lub samochodu ciężarowego
A comparison of stresses in the electrical motor body with different variants of liquid cooling system dedicated for use in the bus or truck
Autorzy:
Cyganik, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/2056365.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
elektromobilność
kadłub silnika
analiza numeryczna
układ chłodzenia silnika elektrycznego
metoda elementów skończonych
electromobility
electrical motor body
numerical analysis
electrical motor cooling system
finite element method
Opis:
W artykule przedstawiono wyniki analiz numerycznych stanu naprężenia dla kadłuba silnika elektrycznego dedykowanego do napędu autobusu lub samochodu ciężarowego o mocy ok. 150 kW. Celem pracy było porównanie wartości naprężeń w kadłubie silnika elektrycznego przy różnych wariantach układu chłodzenia cieczą. Analizom numerycznym poddano warianty kadłuba z pojedynczym kanałem chłodzącym w kształcie spirali oraz warianty kadłuba z układem równoległych pierścieniowych kanałów chłodzących. Ponadto, analizowano również wpływ zaokrągleń krawędzi kanałów chłodzących na redukcję poziomu naprężeń w kadłubie. W warunkach brzegowych uwzględniono działanie stałego co do wartości i kierunku działania momentu skręcającego oraz sił ciężkości stojana, wirnika oraz samego kadłuba. Wyniki obliczeń numerycznych wskazują, że wybór układu chłodzenia w kadłubie silnika elektrycznego ma istotny wpływ na poziom generowanych w nim naprężeń. Analizę prowadzono metodą elementów skończonych w systemie Autodesk Inventor 2012.
The article presents the results of the numerical analyses of mechanical stresses in the electrical motor body dedicated for use in the bus or truck with a capacity of approx. 150kW. The aim of the study was to compare the stresses in the electrical motor body with different variants of liquid cooling system. The numerical analyses were conducted for the variants of motor body with single spiral-shaped cooling channel and for variants of motor body with a system of parallel annular cooling channels. In addition, the influence of rounding edges in the cooling channels on the reduction of stress level was also analyzed. In the boundary con-ditions, the torque and gravity forces of stator, rotor and motor body that were constant in value and direction were taken into account. The results of numerical calculations indicate that the selection of the cooling system in the electric motor body has a significant influence on the mechanical stress level generated in this body. The analyses were conducted using a finite element method in the Autodesk Inventor 2012 system.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2019, 3-4, 123-124; 71--75
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessing the temporal stability of spatial patterns of soil apparent electrical conductivity using geophysical methods
Autorzy:
De Caires, S.A.
Wuddivira, M.N.
Bekele, I.
Powiązania:
https://bibliotekanauki.pl/articles/26396.pdf
Data publikacji:
2014
Wydawca:
Polska Akademia Nauk. Instytut Agrofizyki PAN
Tematy:
temporal stability
spatial pattern
soil
plantation
cocoa
Theobroma cacao
soil property
electrical conductivity
electromagnetic induction
geophysical method
Opis:
Cocoa remains in the same field for decades, resulting in plantations dominated with aging trees growing on variable and depleted soils. We determined the spatio-temporal variability of key soil properties in a (5.81 ha) field from the International Cocoa Genebank, Trinidad using geophysical methods. Multi-year (2008-2009) measurements of apparent electrical conductivity at 0-0.75 m (shallow) and 0.75-1.5 m (deep) were conducted. Apparent electrical conductivity at deep and shallow gave the strongest linear correlation with clay-silt content (R = 0.67 and R = 0.78, respectively) and soil solution electrical conductivity (R = 0.76 and R = 0.60, respectively). Spearman rank correlation coefficients ranged between 0.89-0.97 and 0.81-0.95 for apparent electrical conductivity at deep and shallow, respectively, signifying a strong linear dependence between measurement days. Thus, in the humid tropics, cocoa fields with thick organic litter layer and relatively dense understory cover, experience minimal fluctuations in transient properties of soil water and temperature at the topsoil resulting in similarly stable apparent electrical conductivity at shallow and deep. Therefore, apparent electrical conductivity at shallow, which covers the depth where cocoa feeder roots concentrate, can be used as a fertility indicator and to develop soil zones for efficient application of inputs and management of cocoa fields.
Źródło:
International Agrophysics; 2014, 28, 4
0236-8722
Pojawia się w:
International Agrophysics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Dlaczego ORC jest najlepszym rozwiązaniem do wykorzystania energii odpadowej w cementowni
Why ORC is the best option to recover the waste energy in cement plant
Autorzy:
Duda, J.
Powiązania:
https://bibliotekanauki.pl/articles/392400.pdf
Data publikacji:
2012
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Ceramiki i Materiałów Budowlanych
Tematy:
produkcja klinkieru
piec obrotowy
ciepło odpadowe
odzysk ciepła
wytwarzanie energii
energia elektryczna
kogeneracja
metoda OCR
clinker production
rotary kiln
waste heat
heat recovery
energy manufacturing
electrical energy
cogeneration
ORC method
Opis:
Tradycyjne metody wykorzystania ciepła odpadowego z pieca obrotowego w procesie suszenia surowców i węgla są już niewystarczające. W związku z tym poszukuje się innych sposobów wykorzystania tej energii odpadowej. Metodą, która na świecie jest najczęściej stosowana, jest – na wzór typowej kogeneracji w energetyce – skojarzenie pieca obrotowego z układem do wytwarzania energii elektrycznej. Na przykładzie stosowanych rozwiązań w światowym przemyśle cementowym w artykule uzasadniono wybór metody opartej na układzie ORC.
Traditional methods of utilization of waste heat from the rotary kilns for drying of raw materials and coal are no longer sufficient. Therefore, other ways of waste energy recovering have been explored. The most common method applying in the world wide is electricity generation associated with rotary kiln system, similar to a typical cogeneration in power industry. In the paper, on the example of solutions in the used world cement industry, the choice of method based on the ORC system been justified.
Źródło:
Prace Instytutu Ceramiki i Materiałów Budowlanych; 2012, R. 5, nr 9, 9; 32-43
1899-3230
Pojawia się w:
Prace Instytutu Ceramiki i Materiałów Budowlanych
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Energy efficiency analysis of railway turnout heating system with a melting snow model heated by classic and contactless heating method
Autorzy:
Flis, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/140565.pdf
Data publikacji:
2019
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
electrical heating
enthalpy method
experimental research
melting process
railway turnouts
thermal field
heat distribution
Opis:
Maintaining railway turnout operability is crucial for ensuring railway transport safety. Electric heating of railway turnouts is a significant technical and economic issue. The classical heating is characterised by high power consumption. For this reason, research is needed to optimise the current system. This paper presents results of a numerical analysis and of experimental researches. The numerical analysis was carried out using the ANSYS software. There was conducted a numerical comparative analysis of energy loss during heating performed using two different heaters. Including the classical method and a heater thermally insulated from a rail. In the first step, heating of a working space filled with a substitute snow model was considered. The snow-covered surface area was held within the working space of the turnout. It was assumed that the snow substitute material had thermal properties approximately the same as real light snow. It was also assumed that the material is in the solid state which would not undergo a phase change. In the next step, a real snow model that included the phase change process was taken into account. The energy efficiency and heat distribution in the turnout have been analysed and compared. The experimental researches were carried out in a physical model. The results showed that the use of a contactless heater results in creating a larger area over which emitted heat affected snow in the working space. Consequently, more snow was melted around the contactless heater than the classic one. This experimental observation supported the results of the numerical analyses presented previously.
Źródło:
Archives of Electrical Engineering; 2019, 68, 3; 511-520
1427-4221
2300-2506
Pojawia się w:
Archives of Electrical Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Założenia systemu eksperckiego pomiaru wyładowań niezupełnych przy zastosowaniu metody spektrofotometrii optycznej
Assumptions for the expert system of partial discharge measurements using the optical spectrophotometry method
Autorzy:
Frącz, P.
Powiązania:
https://bibliotekanauki.pl/articles/155778.pdf
Data publikacji:
2009
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
metoda spektrofotometrii optycznej
wyładowania elektryczne
wyładowania niezupełne
optical spectrophotometry method
electrical discharge
partial discharge
high-voltage insulation systems
Opis:
Tematyka niniejszego artykułu dotyczy doskonalenia praktycznych zastosowań metody spektrofotometrii optycznej w diagnostyce wysokonapięciowych układów izolacyjnych urządzeń elektroenergetycznych, wykonywanej podczas ich normalnej pracy w warunkach przemysłowych. W artykule przedstawiono możliwości rozpoznawania podstawowych form wyładowań elektrycznych na podstawie wyników analizy widm optycznych emitowanego podczas ich występowania promieniowania elektromagnetycznego. W szczególności w celach porównawczych zestawiono wartości wybranych deskryptorów tj. wartości średniej (tabela 1) i maksymalnej (tabela 2) intensywności promieniowania optycznego emitowanego przez wybrane formy wyładowań elektrycznych zupełnych i niezupełnych, jakie mogą występować w powietrzu i oleju izolacyjnym. Wartości zostały wyznaczone dla trzech wybranych pasm długości fal promieniowania tj. UV (ultrafioletowego) / VIS (widzialnego) / NIR (bliskiej podczerwieni). Ponadto w artykule scharakteryzowano koncepcję systemu diagnostycznego oceny wyładowań niezupełnych opartego na wynikach uzyskiwanych przy zastosowaniu metody spektrofotometrii optycznej. Zaproponowany system oparty jest na zastąpieniu spektrofotometru czujnikiem składającym się z trzech detektorów promieniowania optycznego, czułych na fale w zakresach UV, VIS i NIR. Schemat blokowy systemu przedstawiono na rys. 1. W podsumowaniu scharakteryzowano zakres realizowanych obecnie prac naukowo-badawczych w Instytucie Elektroenergetyki związanych z praktyczną implementacją zaproponowanego systemu.
This paper deals with the development of practical applications of the optical spectrophotometry method to diagnostics of high-voltage insulation systems of power appliances performed during their regular operation under industrial conditions. There are presented the possibilities for recognition of basic electrical discharge forms based on the analysis of optical spectra emitted during the appearance of electromagnetic radiation. For the purpose of comparison the values of selected descriptors are given. They are the mean values (Table 1) and the maximum (Table 2) optical radiation intensity emitted by selected forms of partial and disruptive electrical discharges which can occur in air and insulation oil. The values are determined for three selected bands of radiation wave lengths, i.e. UV (ultraviolet) / VIS (visible) / NIR (near infrared). Moreover, the concept of a diagnostic system for assessment of partial discharges based on the results obtained by using the optical spectrophotometry method is presented in this paper. The system proposed is based on replacement of a spectrometer with a sensor consisting of three optical radiation detectors, sensitive to waves in UV, VIS and NIR ranges. The block diagram of the system is shown in Fig. 1. In the concluding remarks there is characterized the research work conducted in the Institute of Power Engineering aimed at practical implementation of the system proposed.
Źródło:
Pomiary Automatyka Kontrola; 2009, R. 55, nr 1, 1; 50-53
0032-4140
Pojawia się w:
Pomiary Automatyka Kontrola
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fabrication Of YSZ Thin Film By Electrochemical Deposition Method And The Effect Of The Pulsed Electrical Fields For Morphology Control
Otrzymywanie cienkich warstw YSZ metodą osadzania elektrochemicznego oraz wpływ pulsacyjnych pól elektrycznych na kontrolę morfologii
Autorzy:
Fujita, T.
Saiki, A.
Hashizume, T.
Powiązania:
https://bibliotekanauki.pl/articles/356351.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
yittria stabilized zirconia
thin film
electrochemical deposition method
pulsed electrical field
morphology control
tlenek itru stabilizowany tlenkiem cyrkonu
cienka warstwa
metoda osadzania elektrochemicznego
pulsacyjne pole elektryczne
kontrola morfologii
Opis:
In this study, surface morphology control ions in a precursor solution and patterning the YSZ film has been carried out during deposition of thin film from a precursor solution by applying the electrical field for deposition and the pulsed electrical field. The precursor solution was mixed them of ZrO(NO3)4, Y(NO3)3-6H2O into deionized water, and then was controlled nearly pH3 by adding NH3(aq). The thin film was deposited on the glass substrate of the minus electrode side by applying the electrical field of 3.0 V for 20 min. In addition, another pulsed voltage was applied to the electrical field along the perdicular direction to the film deposition direction. After annealing samples at 773 K for 6 h in air, the film was crystallized and obtained YSZ film. In the limited condition, the linear patterns of YSZ films due to the frequency of the applied electrical field were observed. It is expected that ions in a precursor solution are controlled by applying the pulsed voltage and the YSZ film is patterned on the substrate.
W niniejszej pracy cienkie warstwy YSZ otrzymywano metodą elektrochemiczną z roztworu. Morfologia otrzymanej warstwy była kontrolowana poprzez zastosowanie pulsacyjnego pola elektrycznego. Roztwór prekursora otrzymano poprzez zmieszanie ZrO(NO3)4, Y(NO3)3-6H2O w wodzie dejonizowanej, przy czym pH roztworu było utrzymywane na stałym poziomie (pH = 3) poprzez dodawanie NH3(aq). Na podłoże szklane naniesiono cienką warstwę po stronie ujemnej elektrody przykładając pole elektryczne o napięciu 3,0 V przez 20 min. Dodatkowo, przyłożono napięcie pulsacyjne do pola elektrycznego w kierunku prostopadłym do kierunku nanoszenia warstwy. Po kalcynacji próbek w 773 K przez 6 godz. w powietrzu, warstwa uległa krystalizacji i otrzymano warstwę YSZ. W tych warunkach zaobserwowano liniowe odwzorowanie warstw YSZ spowodowane częstotliwością przyłożonego pola elektrycznego. Przypuszcza się, że przyłożone napięcie pulsacyjne kontroluje jony w roztworze prekursora, co wpływa na strukturę warstwy YSZ.
Źródło:
Archives of Metallurgy and Materials; 2015, 60, 2A; 945-948
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Metody geofizyczne w archeologicznych badaniach starożytnych miast w Egipcie
Geophysical methods in the archaeological study of ancient Egyptian cities
Autorzy:
Herbich, T.
Powiązania:
https://bibliotekanauki.pl/articles/394746.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Gospodarki Surowcami Mineralnymi i Energią PAN
Tematy:
geofizyka archeologiczna
metoda magnetyczna
metoda elektrooporowa
archeologia Egiptu
badania miast antycznych
archaeological geophysics
magnetic method
electrical resistance method
archaeology of Egypt
study of Egyptian cities
Opis:
Podczas ostatnich dwóch dekad nastąpił gwałtowny postęp w poznawaniu zespołów miejskich starożytnego Egiptu. Stało się to możliwe dzięki zastosowaniu metody magnetycznej, pozwalającej rekonstruować plany miast na obszarach o powierzchni dziesiątek hektarów – niemożliwych do przebadania przy użyciu konwencjonalnych metod wykopaliskowych. Metoda jest szczególnie efektywna w przypadku badań zabudowy w delcie Nilu, a także w dolinie Nilu i na jej na obrzeżach, czyli tam, gdzie podstawowym materiałem budowlanym była suszona w słońcu cegła, wytwarzana z mułu nilowego – surowca o dużej zawartości tlenków żelaza, a zatem łatwego do rejestracji przy użyciu metody magnetycznej. W korzystnych warunkach prospekcja magnetyczna daje na tyle dokładny obraz niewidocznej na powierzchni zabudowy, iż na podstawie cech typowych dla danych okresów rozwoju architektury egipskiej można wstępnie określać datę powstania budynków. Pomiary pozwalają także na rejestrowanie miejsc pochówków, struktur o charakterze produkcyjnym (np. piece do produkcji ceramiki). Obszary prowadzone na dużych przestrzeniach pozwalają na rekonstrukcję zmian w krajobrazie (np. poprzez odtworzenie sieci nieistniejących kanałów czy odnóg rzecznych). W pomiarach używane są dwa typy magnetometrów: gradientometry turboptrzepływowe mierzące wektor pionowy natężenia pola magnetycznego oraz magnetometry pompowane optycznie, mierzące całkowite natężenia pola. Gęstość próbkowania wynosi zwykle od 8 do 20 pomiarów na metr kwadratowy. Poza metodą magnetyczną, w badaniach znajduje także zastosowanie metoda elektrooporowa, głównie w wersji profilowań. Jest ona przydatna w badaniach zabudowy z epoki rzymskiej, gdy podstawowym materiałem budowlanym była cegła palona. Gęstość próbkowania wynosi 1 lub 2 pomiary na metr kwadratowy. W artykule przedstawione są wyniki badań autora na stanowiskach z epok począwszy od Średniego Państwa (1 poł. II tysiąclecia przed Chr.) do schyłku pierwszego tysiąclecia po Chr.
Huge progress has been made over the last two decades in research on ancient Egyptian cities, mainly by means of the magnetic method, which has enabled city plans to be reconstructed over dozens of hectares – something conventional excavation methods do not allow. The method is particularly effective in the case of research in the valley and delta of the Nile, where the basic building material was sun-dried brick made of Nile mud, a material rich in iron oxides, easily registered using the magnetic method. Under the right circumstances, magnetic surveying provides an image of subterranean structures, sufficiently precise to date structures on the grounds of characteristics typical for Egyptian architecture of different periods. The readings can also register burials and industrial features (e.g. pottery-production furnaces). Surveys of larger areas support reconstructions of the paleo-landscape (e.g. by recreating canal networks and Nile branches). Measurements are taken using two kinds of instruments: fluxgate gradiometers (measuring the vertical component of the magnetic field) and optically pumped (measuring the total value of the magnetic field). The sampling grid is between 8 and 20 measurements per square meter. Surveying with the resistivity method (mainly profiling) has proved useful for examining sites from the Roman period, when fired brick was the basic material in use for building purposes. The sampling grid in this case is 1 or 2 measurements per square meter. The article presents the author’s research on sites from the Middle Kingdom (the first half of the 2nd millennium BC) to the end of the 1st millennium AD.
Źródło:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN; 2016, 93; 5-19
2080-0819
Pojawia się w:
Zeszyty Naukowe Instytutu Gospodarki Surowcami Mineralnymi i Energią PAN
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Electrical impedance tomography: from topology to shape
Autorzy:
Hintermuller, M.
Laurain, A.
Powiązania:
https://bibliotekanauki.pl/articles/970303.pdf
Data publikacji:
2008
Wydawca:
Polska Akademia Nauk. Instytut Badań Systemowych PAN
Tematy:
electrical impedance tomography
inverse problem
shape derivative
topological derivative
level set method
Opis:
A level set based shape and topology optimization approach to electrical impedance tomography (EIT) problems with piecewise constant conductivities is introduced. The proposed solution algorithm is initialized by using topological sensitivity analysis. Then it relies on the notion of shape derivatives to update the shape of the domains where conductivity takes different values.
Źródło:
Control and Cybernetics; 2008, 37, 4; 913-933
0324-8569
Pojawia się w:
Control and Cybernetics
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies