Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "driving tests" wg kryterium: Temat


Tytuł:
Investigation of the motion of motor vehicles in Polish conditions
Badania ruchu pojazdów samochodowych w warunkach polskich
Autorzy:
Chłopek, Z.
Lasocki, J.
Wójcik, P.
Biedrzycki, J.
Powiązania:
https://bibliotekanauki.pl/articles/263622.pdf
Data publikacji:
2013
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
motor vehicles
driving tests
samochody
testy jezdne
Opis:
In dynamic conditions, the functional properties of internal combustion (IC) engines in steady thermal state depend on time histories of the quantities that characterize the intensity of engine operation. For the automotive engine, the most important process that determines the engine operation is the vehicle speed process. To evaluate the impact of the conditions of operation of motor vehicles on the properties of their IC engines, the investigation of passenger car speed processes in the conditions of typical vehicle use was taken up. The recorded speed vs. time curves were treated as realizations of stochastic processes and basic characteristics of the processes were determined. The vehicle motion was modelled as motion in the street congestion, urban, extra-urban, and high-speed traffic conditions. Based on empirical tests and analyses carried out, sets of passenger car speed vs. time curves have been proposed as realizations of model processes representing the vehicle motion in the conditions under consideration.
Właściwości użytkowe siników spalinowych zależą w warunkach dynamicznych w ustabilizowanych stanie cieplnym silnika od przebiegów wielkości charakteryzujących intensywność pracy silnika. W silniku samochodowym najważniejszym procesem determinującym jego pracę jest prędkość pojazdu. W celu oceny wpływu warunków użytkowaniu pojazdów samochodowych na właściwości silników spalinowych zajęto się badaniem procesów prędkości samochodów osobowych w warunkach ich typowego użytkowania. Zarejestrowane przebiegi prędkości potraktowano jako realizacje procesów stochastycznych i wyznaczono dla nich podstawowe charakterystyki. Ruch pojazdów modelowano jako ruch w zatorach ulicznych (kongestie), w miastach, poza miastami i na trasach szybkiego ruchu. Na podstawie przeprowadzonych badań empirycznych i analiz zaproponowano zbiory przebiegów prędkości samochodu osobowego, stanowiące realizacje procesów modelujących ruch pojazdów w rozpatrywanych warunkach.
Źródło:
Archiwum Motoryzacji; 2013, 2; 3-20, 119-136
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Selected remarks about RDE test
Autorzy:
Merkisz, J.
Pielecha, J.
Powiązania:
https://bibliotekanauki.pl/articles/133698.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
exhaust emission
passenger cars
real driving tests
emisja spalin
samochody osobowe
Opis:
New test procedures for determining exhaust emission from passenger vehicles will be introduced in 2017. For several years, the European Commission has been developing new procedures, which aim is to perform tests in road conditions. The purpose is to determine the real values of emissions, which are not always reflected by the level of emissions obtained in the laboratory. Proper and accurate procedures for determining emissions in real traffic conditions (RDE – Real Driving Emission) have not yet been approved (as opposed to Heavy Duty Vehicles for which such conditions already exist), but there are proposals that are currently being analyzed by major research centers in Europe. There are many differences between those proposals such as determining road emission or research methodology related to emission measurement of hydrocarbons. The work compares the results of emissions measured in road tests using the latest legislative proposals related to passenger cars. The results are shown in relation to the used measurement method: classic method of determining exhaust emission; uses all measurement data determining the mass of harmful compounds and distance travelled during the test; method of averaging the measuring windows (MAW – moving average windows), also in the literature called EMROAD method, which determines the measurement windows (on the basis of carbon dioxide emissions from the WLTC test) and on its basis determines the road emission in RDE test; generalized method of instantaneous power (Power Binning), known in the literature as CLEAR – Classification of Emissions from Automobiles in Real driving, determines road emissions on the basis of generalized instantaneous power during the RDE test.
Źródło:
Combustion Engines; 2016, 55, 3; 54-61
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Reproducibility and repeatability of hybrid propulsion systems operation indexes in test conditions
Odtwarzalność i powtarzalność wskaźników pracy układu napędu hybrydowego w warunkach badawczych
Autorzy:
Pielecha, I.
Cieślik, W.
Siwoń, M.
Powiązania:
https://bibliotekanauki.pl/articles/132977.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
driving tests
hybrid drive system
tests repeatability
operational indexes
testy jezdne
układ napędu hybrydowego
powtarzalność badań
wskaźniki pracy
Opis:
The analysis of driving tests repeatability is an important issue in terms of measuring the parameters determining operating conditions of the engine and the vehicle. Most of the typical tests apply to powertrains systems or entire vehicles. This paper undertakes the issue of practical evaluation of the tests repeatability on test stands equipped with a hybrid drive system. A high reproducibility of driving tests using only the accelerator pedal settings was obtained. Also a significant battery charge level influence on the repeatability of selected parameters of the hybrid drive system in driving tests was proved. Such dependence on the level of battery charge was demonstrated for the vehicle speed, combustion engine speed and the degree of the combustion engine utilization, affecting at the same time the operating conditions of the electric motor.
Analiza powtarzalności testów jezdnych jest zagadnieniem istotnym w aspekcie pomiarów wielkości określających warunki pracy silnika i pojazdu. Większość typowych testów dotyczy badań silników lub pojazdów. W pracy podjęto tematykę praktycznej oceny powtarzalności testów badawczych na stanowisku wyposażonym w układ napędu hybrydowego. Uzyskano dużą odtwarzalność testów jezdnych przy wykorzystaniu jedynie nastaw pedału przyspieszenia. Wykazano duży wpływ stopnia naładowania akumulatora wysokonapięciowego na powtarzalność wybranych parametrów układu napędu hybrydowego w testach jezdnych. Zależność od stopnia naładowania akumulatora wykazują: prędkość pojazdu, prędkość obrotowa silnika spalinowego oraz stopień jego wykorzystania, co jednocześnie wpływa na warunki pracy silnika elektrycznego.
Źródło:
Combustion Engines; 2016, 55, 2; 21-32
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania zużycia energii przez pojazdy w warunkach rzeczywistych
Research on energy consumption by vehicles in real-time conditions
Autorzy:
Woźniak, Krystian
Andrzejewski, Maciej
Daszkiewicz, Paweł
Rymaniak, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/303219.pdf
Data publikacji:
2020
Wydawca:
Wydawnictwo Druk-Art
Tematy:
zużycie energii
pojazdy elektryczne
energia całkowita
testy jezdne
energy consumption
electric vehicles
total energy
driving tests
Opis:
W artykule przedstawiono elementy składowe systemu CL (Contact Line) umożliwiającego pomiar energii pobranej i oddanej do sieci trakcyjnej, pozwalający na precyzyjny pomiar oraz zarządzanie i rozliczanie energii elektrycznej dla pojazdów szynowych. Przywołano najważniejsze normy i wymagania przeprowadzania testów dla pojazdów kolejowych i drogowych przeznaczonych do transportu osób. Zaprezentowano wyniki badań dla elektrycznego autobusu miejskiego przeprowadzone wg autorskiej procedury badawczej, opracowanej przez IPS „Tabor”, która wykorzystywana jest w postępowaniach przetargowych na dostawy autobusów elektrycznych do polskich miast. Pozwala ona na wyznaczanie całkowitej energii pobieranej przez autobus, która jest sumą energii pobieranej i energii oddawanej podczas procesu rekuperacji do zasobników energii. Badania przeprowadzono według opracowanego przez stowarzyszenie International Association of Public Transport testu jezdnego SORT 2, dla którego definiowana jest średnia prędkość jazdy, długość trasy i czas pokonywania przejazdu, co odzwierciedla warunki eksploatacji występujące na typowej trasie miejskiej. Podczas badań uwzględniono stan naładowania akumulatorów – zmiana stanu naładowania akumulatorów przed i po teście była bliska 0 zgodnie z SAE J2711.
The article presents the components of the CL (Contact Line) system allowing for the measurement of energy collected and given to the traction network allowing for precise measurement and management and electricity accounting for rail vehicles. The most important standards and test requirements for railway and road vehicles allowing for the transport of persons were recalled. The results of tests for the electric city bus carried out according to proprietary research procedure developed by IPS „Tabor”, which is used in tender proceedings for the supply of electric buses to Polish cities. It allows you to determine the total energy consumed by the bus, which is the sum of energy consumed and energy returned during the recuperation process to the energy stores. The tests were carried out according to the SORT 2 driving test developed by the communication operator International Association of Public Transport, for which the average speed, route length and time of passing are defined, which reflects the operating conditions of a typical urban route. During the tests, the state of charge of the batteries was taken into account, so that it was the same and the change in the state of charge of the batteries before and after the test was close to 0 according to SAE J2711.
Źródło:
Napędy i Sterowanie; 2020, 22, 1; 74-79
1507-7764
Pojawia się w:
Napędy i Sterowanie
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania zużycia energii przez pojazdy w warunkach rzeczywistych
Research on energy consumption by vehicles in real-time conditions
Autorzy:
Woźniak, Krystian
Andrzejewski, Maciej
Daszkiewicz, Paweł
Rymaniak, Łukasz
Powiązania:
https://bibliotekanauki.pl/articles/1196742.pdf
Data publikacji:
2019
Wydawca:
Sieć Badawcza Łukasiewicz - Instytut Napędów i Maszyn Elektrycznych Komel
Tematy:
zużycie energii
pojazdy elektryczne
energia całkowita
testy jezdne
energy consumption
electric vehicles
total energy
driving tests
Opis:
The article presents the components of the CL (Contact Line) system allowing for the measurement of energy collected and given to the traction network allowing for precise measurement and management and electricity accounting for rail vehicles. The most important standards and test requirements for railway and road vehicles allowing for the transport of persons were recalled. The results of tests for the electric city bus carried out according to proprietary research procedure developed by IPS "Tabor", which is used in tender proceedings for the supply of electric buses to Polish cities. It allows you to determine the total energy consumed by the bus, which is the sum of energy consumed and energy returned during the recuperation process to the energy stores. The tests were carried out according to the SORT 2 driving test developed by the communication operator International Association of Public Transport, for which the average speed, route length and time of passing are defined, which reflects the operating conditions of a typical urban route. During the tests, the state of charge of the batteries was taken into account, so that it was the same and the change in the state of charge of the batteries before and after the test was close to 0 according to SAE J2711.
W artykule przedstawiono elementy składowe systemu CL (Contact Line) pozwalającego na pomiar energii pobranej i oddanej do sieci trakcyjnej pozwalający na precyzyjny pomiar oraz zarządzanie i rozliczanie energii elektrycznej dla pojazdów szynowych. Przywołano najważniejsze normy i wymagania przeprowadzania testów dla pojazdów kolejowych i drogowych pozwalających na transport osób. Zaprezentowano wyniki badań dla elektrycznego autobusu miejskiego przeprowadzone wg autorskiej procedury badawczej opracowanej przez IPS „Tabor”, która wykorzystywana jest w postępowaniach przetargowych na dostawy autobusów elektrycznych do polskich miast. Pozwala ona na wyznaczanie całkowitej energii pobieranej przez autobus, która jest sumą energii pobieranej i energii oddawanej podczas procesu rekuperacji do zasobników energii. Badania przeprowadzono według opracowanego przez stowarzyszenia International Association of Public Transport testu jezdnego SORT 2, dla którego definiowana jest średnia prędkość jazdy, długość trasy i czas pokonywania przejazdu, co odzwierciedla warunki eksploatacji występujące dla typowej trasy miejskiej. Podczas badań uwzględniono stan naładowania akumulatorów – zmiana stanu naładowania akumulatorów przed i po teście była bliska 0, zgodnie z SAE J2711.
Źródło:
Maszyny Elektryczne: zeszyty problemowe; 2019, 2, 122; 103-110
0239-3646
2084-5618
Pojawia się w:
Maszyny Elektryczne: zeszyty problemowe
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparative examination of pollutant emission from an automotive internal combustion engine with the use of vehicle driving tests
Badania porównawcze emisji zanieczyszczeń z samochodowego silnika spalinowego z zastosowaniem testów jezdnych
Autorzy:
Chłopek, Z.
Biedrzycki, J.
Lasocki, J.
Wójcik, P.
Powiązania:
https://bibliotekanauki.pl/articles/134234.pdf
Data publikacji:
2016
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engines
pollutant emission
vehicle driving tests
stochastic processes
silniki spalinowe
emisja zanieczyszczeń
testy jezdne
procesy stochastyczne
Opis:
The pollutant emission from automotive internal combustion (IC) engines is highly susceptible to engine operation states determined by vehicle velocity processes. The article presents results of comparative examinations of specific distance pollutant emission characteristics determined from various vehicle driving tests. The specific distance pollutant emission was determined using vehicle type-approval and special tests as well as tests developed at the Automotive Industry Institute (PIMOT), treated as realizations of the stochastic process of vehicle velocity. The research results confirmed high susceptibility of the IC engine pollutant emission to the engine operation states, which endorses the usefulness of treating the conditions of operation of automotive engines as stochastic processes.
Emisja zanieczyszczeń z samochodowych silników spalinowych jest bardzo wrażliwa na stany pracy silników zdeterminowane procesami prędkości samochodów. W niniejszej pracy przedstawiono wyniki badań porównawczych charakterystyk emisji drogowej zanieczyszczeń w różnych testach jezdnych. Do wyznaczania emisji drogowej zanieczyszczeń wykorzystano testy stosowane w procedurach homologacyjnych i testy specjalne oraz opracowane w Przemysłowym Instytucie Motoryzacji, traktowane jako realizacje procesu stochastycznego prędkości samochodu. Wyniki badań potwierdziły znaczną wrażliwość emisji zanieczyszczeń na stany pracy silnika spalinowego, co potwierdza celowość traktowania warunków pracy silników samochodowych jako procesów stochastycznych.
Źródło:
Combustion Engines; 2016, 55, 1; 56-64
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Assessment of the impact of dynamic states of an internal combustion engine on its operational properties
Ocena wpływu stanów dynamicznych silnika spalinowego na jego właściwości użytkowe
Autorzy:
Chłopek, Z.
Biedrzycki, J.
Lasocki, J.
Wójcik, P.
Powiązania:
https://bibliotekanauki.pl/articles/1365897.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
internal combustion engines
pollutant emissions
vehicle driving tests
dynamic states
silniki spalinowe
emisja zanieczyszczeń
testy jezdne
stany dynamiczne
Opis:
Internal combustion engines as systems described by non-linear models do not have any properties that would not depend on their current states. The paper presents results of testing an automotive engine in dynamic states determined by the vehicle acceleration sign in vehicle driving tests simulating the real operation of passenger cars. During the tests, pollutant emission rates and fuel flow rates averaged for specific vehicle states were examined. The processes under investigation were found to be highly sensitive both to the dynamic states and to the types of the vehicle driving tests.
Silniki spalinowe jako układy opisywane modelami nieliniowymi nie mają właściwości niezależnych od stanów, w jakich się znajdują. W pracy przedstawiono wyniki badań silnika samochodowego w stanach dynamicznych zdeterminowanych znakiem przyspieszenia pojazdu w testach jezdnych symulujących rzeczywistą eksploatację samochodów osobowych. Badano uśrednione w tych stanach: natężenie emisji zanieczyszczeń i natężenie przepływu paliwa. Stwierdzono znaczną wrażliwość badanych procesów zarówno na stany dynamiczne, jak i na rodzaje testów jezdnych.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 1; 35-41
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A method of synthesizing vehicle-driving tests based on an analysis of typical tasks performed by an internal combustion engine
Metoda syntezy testów jezdnych na podstawie analizy typowych zadań realizowanych przez silnik spalinowy
Autorzy:
Chłopek, Z.
Szczepański, T.
Powiązania:
https://bibliotekanauki.pl/articles/1363519.pdf
Data publikacji:
2017
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
internal combustion engines
vehicle driving tests
dynamics of internal combustion engines
synthesis of tests
silniki spalinowe
testy badawcze
dynamika silników spalinowych
synteza testów
Opis:
The article presents an authorial method of synthesizing vehicle-driving tests for determining, by rig testing, performance characteristics of internal combustion (IC) engines in dynamic states representative for the conditions of real engine operation. The method of synthesizing such tests is based on the criteria of similarity between characteristics of the physical quantities that describe the state of engine operation. The similarity criteria apply to the tasks performed by the engine and defined as the consecutive engine operation conditions and the corresponding engine operation states, each representing an elementary action performed by the engine operator by means of the engine. An example synthesis of a test has been presented for the engine speed in the IC engine operation conditions corresponding to the FTP-75 test cycle. The tests built in accordance with the method presented show good repeatability for the empirical data corresponding to various engine speed realizations in the vehicle-driving test.
W pracy przedstawiono autorski sposób syntezy testu do badań właściwości użytkowych silników spalinowych w stanach dynamicznych, reprezentatywnych dla warunków rzeczywistego użytkowania silnika. Metoda syntezy testów badawczych jest wykonywana zgodnie z kryteriami podobieństwa charakterystyk wielkości fizycznych opisujących stan pracy silnika. Kryterium podobieństwa dotyczy zadań realizowanych przez silnik, definiowanych jako kolejno występujące warunki pracy i odpowiadające im stany pracy silnika, reprezentujące elementarną czynność realizowaną za pomocą silnika przez jego operatora. Przykład syntezy testu badawczego przedstawiono dla prędkości obrotowej w warunkach pracy silnika spalinowego, odpowiadających testowi jezdnemu FTP-75. Wyznaczone zgodnie z przedstawioną metodą testy wykazują dobrą powtarzalność dla empirycznych danych odpowiadających różnym realizacjom prędkości obrotowej w teście jezdnym.
Źródło:
Archiwum Motoryzacji; 2017, 77, 3; 31-50
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Examination of pollutant emissions and fuel consumption at tests simulating the real conditions of operation of a passenger car
Badania emisji zanieczyszczeń i zużycia paliwa w testach symulujących rzeczywiste warunki użytkowania samochodu osobowego
Autorzy:
Chłopek, Z.
Biedrzycki, J.
Lasocki, J.
Wójcik, P.
Powiązania:
https://bibliotekanauki.pl/articles/1364158.pdf
Data publikacji:
2014
Wydawca:
Sieć Badawcza Łukasiewicz. Przemysłowy Instytut Motoryzacji
Tematy:
motor vehicles
internal combustion engines
driving tests
pollutant emissions
fuel consumption
samochody
silniki spalinowe
testy jezdne
emisja zanieczyszczeń
zużycie paliwa
Opis:
The paper presents results of examination of pollutant emissions and fuel consumption at tests simulating the real conditions of operation of a passenger car. The examination was carried out with the use of PIMOT simulation driving tests developed at the Automotive Industry Institute (PIMOT) on the grounds of analyses of motorcar velocity processes empirically recorded in the conditions of driving the car in urban traffic congestions, urban traffic without congestions, extra-urban traffic, and high-speed traffic (on motorways and fast roads). The pollutant emission and fuel consumption tests were performed on a vehicle chassis dynamometer, where a Honda Civic car with a spark-ignition engine was used as a test specimen. The scope of the examination covered the emissions of carbon monoxide, hydrocarbons, nitrogen oxides, and carbon dioxide. The unrepeatability of the pollutant specific distance emission and the operating fuel consumption values determined was evaluated with the use of the coefficient of variation of the results of measurement of specific quantities. Significant unrepeatability was revealed in the results of measurements of the specific distance emission of carbon monoxide, hydrocarbons, and nitrogen oxides, while the unrepeatability of the results of measurements of carbon dioxide emission and the operating fuel consumption was relatively low. Characteristic curves of the pollutant specific distance emission and the operating fuel consumption as functions of the average vehicle velocity were also determined at the PIMOT tests. The characteristic curves plotted were found to be consistent with the dependences determined on the grounds of the databases incorporated in specialist software packages, such as INFRAS or COPERT.
W artykule przedstawiono wyniki badań emisji zanieczyszczeń i zużycia paliwa w testach symulujących rzeczywiste warunki użytkowania samochodu osobowego. Do badań wykorzystano testy jezdne PIMOT, opracowane w Przemysłowym Instytucie Motoryzacji. Testy te opracowano na podstawie badań empirycznych procesów prędkości samochodu osobowego w warunkach: zatorów ulicznych, w miastach, poza miastami oraz na autostradach i trasach ekspresowych. Badania emisji zanieczyszczeń i zużycia paliwa przeprowadzano na hamowni podwoziowej na samochodzie Honda Civic z silnikiem o zapłonie iskrowym. Badano emisję tlenku węgla, węglowodorów, tlenków azotu i dwutlenku węgla. Do oceny niepowtarzalności wyznaczonych wartości emisji drogowej zanieczyszczeń oraz eksploatacyjnego zużycia paliwa wykorzystano współczynnik zmienności wyników pomiarów poszczególnych wielkości. Stwierdzono znaczną niepowtarzalność wyników pomiarów emisji drogowej tlenku węgla, węglowodorów i tlenków azotu, natomiast stosunkowo małą emisji drogowej dwutlenku węgla i eksploatacyjnego zużycia paliwa. Wyznaczono również charakterystyki emisji drogowej zanieczyszczeń i eksploatacyjnego zużycia paliwa w testach PIMOT w zależności od prędkości średniej. Stwierdzono, że wyznaczone charakterystyki są zgodne z zależnościami wyznaczanymi na podstawie baz danych, zawartych w specjalistycznych oprogramowaniach, takich jak INFRAS, czy COPERT.
Źródło:
Archiwum Motoryzacji; 2014, 65, 3; 3-18
1234-754X
2084-476X
Pojawia się w:
Archiwum Motoryzacji
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Simulation analysis of electric vehicles energy consumption in driving tests
Symulacyjna analiza energochłonności pojazdów elektrycznych w testach badawczych
Autorzy:
Pielecha, Ireneusz
Pielecha, Jacek
Powiązania:
https://bibliotekanauki.pl/articles/300650.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
automotive vehicles
electric drive
high voltage batteries
energy flow
driving tests
pojazdy samochodowe
napęd elektryczny
akumulator wysokonapięciowy
przepływ energii
testy jezdne
Opis:
The assessment of energy flow through electric vehicle systems makes estimating their energy consumption possible. The article presents analyzes of the energy consumption of electric vehicles in selected driving tests (NEDC, WLTC and in real traffic conditions – RDC test) in relation to the vehicles different curb weight. The use of electric motors was also analyzed, providing their operating ranges, data of the energy flow in batteries and the change in their charge level. Simulation tests and analyzes were carried out using the AVL Cruise software. It was found that despite similar vehicle energy consumption values in NEDC and RDC testing, there are significant differences in energy flow in vehicle subsystems. The changes in the battery charge level per 100 km of test drive are similar in both the WLTC and RDC tests (6% difference); for the NEDC test, this difference is the greatest at 25% (compared to the previous tests). The energy consumption of electric vehicles depends significantly on the test itself; the values obtained in the tests are in the ranges of 10.1–13.5 kWh/100 km (NEDC test); 13–15 kWh/100 km (WLTC test) and 12.5–16.2 kWh/100 km in the RDC test. The energy consumption values in the NEDC and WLTC tests, compared to the RDC test, are approximately 20% and 10% lower, respectively. Increasing the vehicle mass increases the energy consumption (increasing the vehicle mass by 100 kg was found to increase the energy consumption by 0.34 kWh/100 km).
Ocena przepływu energii przez układy pojazdów elektrycznych umożliwia oszacowanie ich energochłonności. W artykule przedstawiono analizy dotyczące zużycia energii pojazdów elektrycznych w wybranych testach jezdnych (NEDC, WLTC oraz w rzeczywistych warunkach ruchu – test RDC) w odniesieniu do zróżnicowanej masy pojazdów. Analizie poddano również wykorzystanie silników elektrycznych, przedstawiając mapy ich pracy, wielkości przepływu energii w akumulatorach oraz stopień zmiany ich naładowania. Badania i analizy symulacyjne wykonano z wykorzystaniem oprogramowania AVL Cruise. Stwierdzono, że mimo podobnych wartości energochłonności pojazdów w testach badawczych NEDC oraz RDC, to występują znaczące różnice przepływu energii w układach akumulacji pojazdów. Zmiany stopnia naładowania akumulatora odniesione do 100 km testu są zbliżone w testach WLTC oraz RDC (różnica 6%); dla testu NEDC różnica ta wynosi maksymalnie 25% (w odniesieniu do poprzednich testów). Energochłonność pojazdów elektrycznych jest silnie zależne od testu badawczego; wartości uzyskane w testach kształtują się na poziomie 10,1–13,5 kWh/100 km (test NEDC); 13–15 kWh/100 km (test WLTC) oraz 12,5–16,2 kWh/100 km w teście RDC. Wartości energochłonności w testach NEDC oraz WLTC są odpowiednio mniejsze o około 20% i 10% w odniesieniu do testu RDC. Zwiększenie masy pojazdu zwiększa zużycie energii (zwiększenie o 100 kg masy pojazdu zwiększa zużycie energii o 0,34 kWh/100 km).
Źródło:
Eksploatacja i Niezawodność; 2020, 22, 1; 130-137
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Exhaust emission test performance with the use of the signal from air flow meter
Eksploatacyjne badania emisji spalin z wykorzystaniem sygnału z przepływomierza powietrza
Autorzy:
Kuranc, A.
Powiązania:
https://bibliotekanauki.pl/articles/1365852.pdf
Data publikacji:
2015
Wydawca:
Polska Akademia Nauk. Polskie Naukowo-Techniczne Towarzystwo Eksploatacyjne PAN
Tematy:
exhaust emission test
mobile systems
emissions of CO2
driving tests
badania emisji spalin
mobilne systemy pomiarowe
emisja CO2
testy jezdne
Opis:
The paper presents selected technical solutions in the area of exhaust emissions research conducted in real operational conditions of a vehicle. The author describes his own road emissions research methodology with the use of information about the air flow supplying an engine (OBD II) and the measured volumetric shares of particular fumes components (exhaust gas analyser). Test results confirm the possibility of applying this measurement method, and their analysis shows the inadequacy of the type-approval tests compared to the real operation of the vehicle.
W pracy omawiane są wybrane rozwiązania techniczne w zakresie badań emisji spalin w warunkach rzeczywistej eksploatacji pojazdu. Autor opisuje własną metodykę drogowych badań emisji spalin z wykorzystaniem informacji o wydatku powietrza zasilającego silnik (OBD II) i zmierzonych udziałów objętościowych poszczególnych składników (analizator spalin). Wyniki badań potwierdzają możliwość stosowania opisanej metody pomiarowej, a ich analiza wskazuje ponadto na nieadekwatność testów homologacyjnych w odniesieniu do realnej eksploatacji pojazdu.
Źródło:
Eksploatacja i Niezawodność; 2015, 17, 1; 129-134
1507-2711
Pojawia się w:
Eksploatacja i Niezawodność
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Investigation of pollutant emissions from a motor vehicle engine in tests simulating real vehicle use in road traffic conditions
Badania emisji zanieczyszczeń z silnika samochodu w testach symulujących rzeczywiste użytkowanie trakcyjne
Autorzy:
Chłopek, Z.
Biedrzycki, J.
Lasocki, J.
Wójcik, P.
Powiązania:
https://bibliotekanauki.pl/articles/133208.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
internal combustion engines
pollutant emissions
vehicle driving tests
simulation of motor vehicle motion conditions
silniki spalinowe
emisja zanieczyszczeń
testy jezdne
symulacja warunków ruchu samochodów
Opis:
Vehicle driving tests worked out by the authors and simulating the typical road operation of a motor vehicle have been described. The tests have been developed on the grounds of analyses of vehicle speed processes recorded during empirical tests, which were carried out in road traffic conditions. In the vehicle motion models adopted, the conditions of vehicle operation in congestion, urban, extra–urban, and high–speed traffic were separately considered. Pollutant emission test results obtained from the driving test procedures proposed have been presented.
W pracy przedstawiono opracowane przez autorów testy jezdne symulujące typowe użytkowanie trakcyjne samochodu. Opracowano je na podstawie analiz procesów prędkości samochodu uzyskanych w badaniach empirycznych przeprowadzonych w ruchu drogowym. W przyjętych modelach ruchu wyodrębniono warunki użytkowania samochodu w zatorach ulicznych, w miastach, poza miastami i na trasach szybkiego ruchu. Przedstawiono wyniki badań emisji zanieczyszczeń uzyskane z zastosowaniem zaproponowanych testów jezdnych.
Źródło:
Combustion Engines; 2013, 52, 3; 202-207
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Use of data from on-board data recorders for acceptance tests of avionic driving units
Autorzy:
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/243070.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diagnostics of aircraft engines
qualification tests for avionic driving units
Opis:
The paper explains how information stored in on-board recorders of flight parameters can be used for acceptance tests, also referred to as qualification tests. The disclosed example refers to the An-28 ‘Bryza’ aircraft where an old airscrew was substituted with the new generation Hartzell airscrew of the HC-B5 MP-3D type. The airscrew is an integral part of the driving system for the airscrew propelled aircraft that is provided with the TWD-10B engine. After revamping of the airscrew, the aircraft was named as TWD-10B/PZL-10S. The follow-up investigations were carried out with the aim to find out how much the airscrew substitution affected the alteration of key performance characteristics achieved by the driving unit of the aircraft. The investigations comprised both ground and in-flight tests and have led to determination of the essential characteristics for the engine operation as well as variations of the operational parameters in time. In some cases also so called phase portraits were found out for parameters of the engine operation so that to reflect dynamic properties of the engines. Such investigations are indispensable since the aircrafts are subject to operational limitations and technical conditions that must be mandatory fulfilled due to requirements of flight safety. The paper demonstrates that the data stored in on-board recorders of flight parameters can be really useful for execution of such acceptance (qualification) tests.
Źródło:
Journal of KONES; 2013, 20, 2; 201-206
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Analysis of an aircraft engine start-up process on the example of the PZL-130 TC-II „Orlik” training aircraft
Autorzy:
Kowalski, M.
Powiązania:
https://bibliotekanauki.pl/articles/244355.pdf
Data publikacji:
2014
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
diagnostics of aircraft engines
qualification tests of aircraft driving units
Opis:
The paper discloses the analysis of processes that take place during the start-up operation of the driving unit for the training aircraft of the TZL-130 TC-II Turbo-Orlik type. The aircraft is designed for selective and initial trainings at the Air Force School of “Little Eagles” in Dęblin. The driving unit comprises the PT6A-25C turbo-propeller engine from Pratt & Whitney combined with the four-bladed airscrew from Hatzell. It is specifically mentioned that data for the analysis were sourced from the S2-3a on-board recorder of flight parameters manufactured by the Air Force Institute of Technology (AFIT). The analysis was carried out both during ground and flight tests. The paper briefly outlines general structures and operation principles of typical start-up systems with the focus to their key components. Attention is paid to how important it is to select an appropriate start-up system to match the specific aircraft type and the guideline parameters for selection that should be adhered to are specified. Also there are disclosed the key mathematical relationships that are indispensable to design start-up systems and to find out their basic characteristics. It is emphasized that the start-up operation must be considered as a non-stationary process that lasts from the standstill state of the engine until the moment when the minimum required rpm is reached, sufficient to generate necessary power of the engine. In addition, the attention is paid to the fact that the value of the engine acceleration is crucial to the achievable start-up time that is deemed as one of key parameters for all start-up systems. It is demonstrated that to achieve the required level of acceleration, it is necessary to secure the so called overhead of the engine power which needs constant flow offuel and air into the combustion chamber of the engine. The last part of the paper comprises selected characteristic curves that were obtained from the analysis of the engine start-up processes both on ground and in flight. The final conclusions emphasize that the start-up system for the presented driving unit is really efficient and guarantees correct operation of the engine under any conditions.
Źródło:
Journal of KONES; 2014, 21, 3; 177-189
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ stylu jazdy według zasad eco-drivingu na emisję substancji toksycznych z lekkiego samochodu użytkowego
The influence of the driving style according to the principles of eco-driving on the emission of toxic substances from a light utility vehicle
Autorzy:
Andrzejewski, Maciej
Nowak, Mateusz
Powiązania:
https://bibliotekanauki.pl/articles/310720.pdf
Data publikacji:
2019
Wydawca:
Instytut Naukowo-Wydawniczy "SPATIUM"
Tematy:
styl jazdy
eco-driving
badania drogowe
emisja spalin
driving style
road tests
exhaust emissions
Opis:
W artykule zaprezentowano wyniki pomiarów toksyczności spalin samochodu dostawczego w rzeczywistych warunkach ruchu. Celem badań było zweryfikowanie wpływu stylu jazdy kierowcy na emisję substancji szkodliwych w spalinach. Do realizacji celu wykonano pomiary emisji drogowej podstawowych gazowych związków toksycznych w spalinach emitowanych do atmosfery przez jednostkę napędową pojazdu. Do pomiarów zawartości poszczególnych zanieczyszczeń gazowych wykorzystano mobilną aparaturę do badań toksyczności spalin typu PEMS.
The article presents the results of measurements of exhaust emissions of commercial vehicle in real traffic conditions. The aim of this study was to determine how the driving style effects on the exhaust emissions from vehicle engine. The determinants were the measurements of the concentration of main toxic substances emitted to the atmosphere from the power unit of the tested vehicle. In the measurements a portable exhaust emission analyzer was used (PEMS type).
Źródło:
Autobusy : technika, eksploatacja, systemy transportowe; 2019, 20, 6; 33-37
1509-5878
2450-7725
Pojawia się w:
Autobusy : technika, eksploatacja, systemy transportowe
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies