Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "drilling rig" wg kryterium: Temat


Tytuł:
Środowiskowe aspekty procesów poszukiwania i wydobycia gazu ze złóż niekonwencjonalnych typu shale gas
Environmental aspects of shale gas exploration and extraction processes
Autorzy:
Wójcik, Monika
Powiązania:
https://bibliotekanauki.pl/articles/470775.pdf
Data publikacji:
2013
Wydawca:
Uniwersytet Kardynała Stefana Wyszyńskiego w Warszawie
Tematy:
shale gas
drilling rig
pollution
waste
environment
emissions
Opis:
Shale gas exploration and extraction processes creates a potential threat for all environmental elements like: air and noise emissions, contamination of surface and groundwater, soil pollutions, production of different types of waste or increasing water consumption. The degree of potential environmental impact depends especially on location and size of a drilling rig, level of urbanization of an area, sensitivity of environment to pollution and type of technological operations which depends on shale formation. The paper presents main environmental hazards during shale gas exploration and extraction processes and ways of its reduce. Explain how investors can resolve problems with flowback water qualification, prepare drilling rig area or store hazardous materials and chemicals. Generally impacts of drilling processes on the environment are well recognized. Legal compliance with environmental legislation and procedures like Health Safety & Environment Management System or Environmental Management Systems can minimalized potential damages.
Źródło:
Studia Ecologiae et Bioethicae; 2013, 11, 3; 145-156
1733-1218
Pojawia się w:
Studia Ecologiae et Bioethicae
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Kompleksowa analiza ryzyka środowiskowego dla procesów poszukiwania i eksploatacji niekonwencjonalnych złóż węglowodorów typu shale gas w Polsce
Complex environmental risk assessment for the exploration and extraction processes of unconventional hydrocarbon deposits of the shale gas type in Poland
Autorzy:
Wójcik, M.
Powiązania:
https://bibliotekanauki.pl/articles/1835194.pdf
Data publikacji:
2018
Wydawca:
Instytut Nafty i Gazu - Państwowy Instytut Badawczy
Tematy:
analiza ryzyka środowiskowego
rozwój zrównoważony
gaz z łupków
wiertnia
zanieczyszczenie środowiska
environmental risk assessment
sustainable development
shale gas
drilling rig
environment pollution
Opis:
Poszukiwanie i wydobycie gazu ze złóż niekonwencjonalnych typu shale gas może stwarzać potencjalne zagrożenia dla środowiska. Praca prezentuje propozycję analizy ryzyka środowiskowego, która może być wstępem do zarządzania ryzykiem podczas procesów poszukiwania i wydobycia gazu z łupków w warunkach polskich.
Shale gas exploration and extraction processes create a potential threat to the environment. This paper presents an environmental risk assessment which can be used for the risk management during shale gas exploration and extraction processes in Polish conditions.
Źródło:
Nafta-Gaz; 2018, 74, 3; 208-214
0867-8871
Pojawia się w:
Nafta-Gaz
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena hałasu na wybranych stanowiskach pracy pracowników umysłowych wiertni gazu z łupków
Noise evaluation on selected workstations of white-collar employees at shale gas drill sites
Autorzy:
Warmiak, I.
Powiązania:
https://bibliotekanauki.pl/articles/180404.pdf
Data publikacji:
2016
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
hałas
ocena hałasu
stanowiska pracy
wieża wiertnicza
noise
noise evaluation
work stations
drilling rig
Opis:
W artykule porównano zagrożenie hałasem na terenie dwóch wiertni poszukiwawczych gazu z łupków. Uwzględniono stanowiska pracy kierowników wiertni, pracowników działu bhp i geologów. W związku z charakterem tych prac ocenę hałasu przeprowadzono ze względu na ochronę słuchu oraz możliwość realizacji podstawowych zadań. Przedstawiono wyniki pomiarów i oceny hałasu, z których wynika, ze hałas przekracza na jednej wiertni na stanowisku pracownika bhp poziomy dopuszczalne ze względu na ochronę słuchu. Na żadnym stanowisku nie ma przekroczeń poziomów dopuszczalnych hałasu ze względu na możliwość realizacji podstawowych zadań Hałas na terenie wiertni II był średnio o 6-9 dB większy, niż na wiertni I. Na obu wiertniach występowały strefy, w których hałas przekraczał 85 dB. Z badań wynika, że na wiertniach gazu z łupków nawet pracownicy wykonujący zadania koncepcyjne, jeśli część czasu pracy pracują w strefach, w których hałas przekracza 85 dB, mogą być narażeni na utratę słuchu.
The article compares noise hazard on the premises of two exploratory shale gas drill sites. It considers work stations of drill site managers, OSH specialists and geologists. Given the nature of work carried out by these employees, noise evaluation was conducted with respect to hearing protection and ability to perform basic tasks in the work process. The presented results of noise measurements and evaluation suggest that at one drill site, at the work station of an OSH specialist, noise exceeds the permissible levels with regard to hearing protection. At none of the work stations the permissible noise levels with regard to ability to perform basic tasks m the work process are exceeded Noise on the premises of drill site II was on average by 6-9 dB higher than at drill site I. At both drill sites there were zones where noise exceeded 85 dB. Tests indicate that at shale gas drill sites even employees performing conceptual tasks maybe exposed to the hazard of hearing loss if they spend a part of their working time in zones where noise exceeds 85 dB.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2016, 5; 24-27
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Stosowanie ochronników słuchu przez pracujących na wiertniach gazu z łupków
Using ear-muffs on shale gas drilling rigs
Autorzy:
Warmiak, I.
Powiązania:
https://bibliotekanauki.pl/articles/181191.pdf
Data publikacji:
2017
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
ochronniki słuchu
hałas
wieża wiertnicza
ear-muffs
noise
drilling rig
Opis:
W artykule zaprezentowano wyniki pomiarów parametrów hałasu oraz oceny narażenia na hałas pracowników wiertni gazu z łupków. Przedstawiono również praktyczny przykład doboru ochronników słuchu, na stanowiskach pracy, na których stwierdzono przekroczenia poziomów hałasu w zakresie słyszalnym. Badania dowodzą, że na stanowiskach pracy elektryka, mechanika oraz pomocnika wieżowego wiertacza, w celu zmniejszenia narażenia na hałas, jak i zwiększenia komfortu pracy, istnieje konieczność stosowania dwóch rodzajów ochronników słuchu.
This article presents measurements of noise parameters and estimates of noise exposure for workers on shale gas drilling rigs. It also presents a practical example of select mg ear-muffs for workstations in which noise levels in the audible range have been exceeded. Research has shown that to reduce noise exposure and to improve work comfort for an electrician, a mechanic and a tower driller assistant, it is necessary to use two kinds of ear-muffs.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2017, 6; 19-22
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Functional structure of battery drive for self-propelled mining rig used in room-pillar ore exploitation system
Autorzy:
Szurlej, Tomasz
Ostapów, Lesław
Mendyka, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2064421.pdf
Data publikacji:
2019
Wydawca:
STE GROUP
Tematy:
drilling rig
bolting rig
battery drive
hard rock mining
electromobility
wiertnica
wóz kotwiący
napęd akumulatorowy
urabianie
elektromobilność
Opis:
The article presents the structure of the battery drive of a self-propelled mining vehicle on the example of a drilling rig, used in the room-pillar system of copper ore exploitation. Such solutions, due to the ore mining in increasingly difficult operating conditions, are becoming more and more popular in the world. The main assumptions required for the synthesis of this type of drive were indicated, as well as the adopted structure of such a solution was described. The selection of the appropriate drive structure determines the final work characteristics of the self-propelled mining vehicle, and thus the actual suitability of such a machine for use in mining conditions. The paper also details the main technological advantages of this type of drive over classic internal combustion drives.
Źródło:
New Trends in Production Engineering; 2019, 2, 1; 112--120
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Drilling and bolting rigs operator support using FGS (Feeder Guiding System) and remote control
Autorzy:
Sarecki, Łukasz
Ostapow, Lesław
Ławicki, Piotr
Mendyka, Paweł
Powiązania:
https://bibliotekanauki.pl/articles/2064427.pdf
Data publikacji:
2019
Wydawca:
STE GROUP
Tematy:
drilling rig
bolting rig
drilling control
remote control
drilling feeder system
wiertnica
wóz kotwiący
kontrola wiercenia
zdalne sterowanie
Opis:
The article presents the assumptions and main functionalities of two operator support systems - the FGS (Feeder Guiding System) and the remote control system of a drilling or bolting rig. Both of these systems greatly facilitate the work of an operator of a self-propelled mining vehicle in the conditions of an underground metal ore mine. The first of the described system allows for real-time control of the current position of the mining boom and facilitates the drilling of blast holes according to a predetermined drilling pattern. The second of the systems - a remote control system - is used especially in conditions of unstable rock mass or in the case of work in particularly difficult operating conditions, where it is advisable to limit the presence of the crew from the face-up to the necessary minimum. The intensity of these vibrations was related to the conditions of the cutting process.
Źródło:
New Trends in Production Engineering; 2019, 2, 1; 50--58
2545-2843
Pojawia się w:
New Trends in Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Liebherr - specjalista w produkcji maszyn do głębokiego fundamentowania
Liebherr – a specialist in the production of deep foundation machines
Autorzy:
Rudner, A.
Powiązania:
https://bibliotekanauki.pl/articles/364868.pdf
Data publikacji:
2016
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
maszyny budowlane
palownica
wiertnica
głębokie fundamentowanie
machinery
piling
drilling rig
deep foundation
Opis:
Fabryka Liebherr w austriackiej miejscowości Nenzing jest oddziałem firmy produkującym szeroką gamę specjalnych maszyn do głębokiego fundamentowania. Wśród nich są wiertnice obrotowe, palownice oraz maszyny łączące cechy palownic i wiertnic. Poza powyższymi Liebherr-Werk Nenzing GmbH oferuje również szeroki wybór uniwersalnych koparek linowych, a także żurawi o możliwościach udźwigu do 300 t.
The Liebherr factory in the Austrian town of Nenzing is a division of the company which manufactures a wide range of special machinery for deep foundation. They include rotary drilling rigs, piling machines and machines that combine the features of both. Apart from the above, Liebherr-Werk Nenzing GmbH also offers a wide range of universal dragline excavators, as well as cranes with lifting capacity up to 300 t.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2016, 4; 44-45
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Rury do mikrotunelowania HABA-BETON pod ulicami Krakowa
HABA-BETON microtunneling pipes under Kraków streets
Autorzy:
Pawlikowski, T.
Poloczek, T.
Powiązania:
https://bibliotekanauki.pl/articles/366011.pdf
Data publikacji:
2013
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
wiertnica hydrauliczna
rury
mikrotunelowanie
hydraulic drilling rig
tubing
microtunelling
Opis:
Koniec 2012 r. i początek 2013 r. były przełomowym okresem dla HABA-BETON Johann Bartlechner Sp. z o.o. oraz Firmy Budowlanej Majerczak z Krakowa. Firmy te zmierzyły się z ciekawym wyzwaniem, jakim była rozbudowa sieci c.o. na terenie ulic Zakliki z Mydlnik, Balickiej oraz Wojciecha Weissa w Krakowie. Roboty polegały na ułożeniu trzech przecisków o średnicy DN 2000/2400 mm, sterowanych teleoptycznie, o łącznej długości 100 m.
The turn of 2012 and 2013 saw a break-through for HABA-BETON Johann Bartlechner Sp. z o.o. and Kraków’s Firma Budowlana Majerczak. The two companies faced an interesting challenge of expanding Kraków’s central heating network. The works included constructiong three tunnels with DN 2,000/2,400 mm.
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2013, 3; 48
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Identyfikacja dominujących źródeł hałasu na terenie wiertni gazu łupkowego za pomocą map rozkładu poziomu ciśnienia akustycznego
Identifying dominating noise sources at a shale gas drill site with acoustic pressure maps
Autorzy:
Mikulski, W.
Warmiak, I.
Powiązania:
https://bibliotekanauki.pl/articles/180531.pdf
Data publikacji:
2016
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
hałas
źródła hałasu
wieża wiertnicza
noise
noise sources
drilling rig
Opis:
W ostatnich latach w Polsce prowadzi się prace poszukiwawczo-rozpoznawcze związane z pozyskiwaniem gazu z łupków. Artykuł dotyczy identyfikacji źródeł hałasu wiertni, z punktu widzenia ekspozycji na hałas pracowników pracujących na jej terenie. Jednym ze sposobów identyfikacji źródeł hałasu jest zastosowanie wyznaczonych metodą pomiarowo-obliczeniową map hałasu, wykonanych w pasmach częstotliwości. Z map tych wynika, że silnik spalinowy napędzający prądnice do Top Drive jest na wiertniach największym źródłem hałasu w zakresie częstotliwości powyżej 500 Hz. Drugim co do wielkości emisji hałasu typem źródła są pompy płuczkowe, szczególnie w zakresie częstotliwości od 8 do 63 Hz. Trzecim istotnym źródłem hałasu są sita wibracyjne, szczególnie w zakresie częstotliwości od 8 do 63 Hz oraz w paśmie 4000 Hz.
In recent years exploration and assessment work has been conducted in Poland in order to acquire shale gas. This article discusses identifying sources of noise at a drill site from the point of view of exposed workers. Sources of noise can be identified with acoustic maps created with an assessment and calculation method. These maps are made in frequency ranges. These maps have shown that the internal combustion engine driving Top Drive generator is the greatest source of noise in the frequency range above 500 Hz. Mud pumps are the second greatest noise-emitting type of source, especially in the frequency range from 8 to 63 Hz. Vibrating sieves. The are the third greatest noise-emitting source, especially in the frequency range from 8 to 63 Hz and in the band of 4000 Hz.
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2016, 3; 13-17
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena zagrożenia hałasem na wybranych stanowiskach pracy wiertni poszukiwawczo-rozpoznawczej gazu łupkowego
Risk assessment of noise at the chosen workplaces by the shale gas drilling rig
Autorzy:
Mikulski, W.
Warmiak, I.
Powiązania:
https://bibliotekanauki.pl/articles/179324.pdf
Data publikacji:
2015
Wydawca:
Centralny Instytut Ochrony Pracy
Tematy:
zagrożenie hałasem
wieża wiertnicza
ochrona słuchu
noise hazard
drilling rig
hearing protection
Opis:
W poszukiwaniach złóż gazu jednym z bardziej istotnych z punktu widzenia zagrożenia pracowników hałasem procesów jest wykonywanie pionowych i poziomych odwiertów poszukiwawczo-rozpoznawczych. W artykule rozpatrzono ekspozycję na hałas trzech pracowników bezpośrednio związanych z głębieniem otworu wiertniczego. Ocenę hałasu ze względu na ochronę słuchu wykonano na trzech stanowiskach pracy. Pomiary wykazały, ze pracownicy zatrudnieni na stanowiskach pracy przy bezpośredniej obsłudze wieży wiertniczej, pomocnicy wiertacza otworowi i wieżowi narażeni są na hałas przekraczający poziomy dopuszczalne ze względu na ochronę słuchu (NDN hałasu).
One of the major processes at shale gas drilling rigs, from the employee's point of view, is performing vertical and horizontal search-and-distinct drillings. The article talks about the noise exposure of three employees directly involved in such an endeavor. Noise assessment related to hearing protection was performed at three workplaces. The measurements show the employees hired at the mentioned rig - driller helpers at the hole and at the tower, are subjected to noise exceeding the highest permitted levels m relation to hearing protection (OEC of noise).
Źródło:
Bezpieczeństwo Pracy : nauka i praktyka; 2015, 8; 21-23
0137-7043
Pojawia się w:
Bezpieczeństwo Pracy : nauka i praktyka
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Środowiskowe aspekty produkcji gazu ziemnego z niekonwencjonalnych złóż
Environmental aspects of unconventional gas production
Autorzy:
Macuda, J.
Powiązania:
https://bibliotekanauki.pl/articles/2074764.pdf
Data publikacji:
2010
Wydawca:
Państwowy Instytut Geologiczny – Państwowy Instytut Badawczy
Tematy:
wiertnia
zanieczyszczenia
odpady
drilling rig
pollution
waste
Opis:
Prospecting and production of natural gas from unconventional gas fields is performed through regular diameter, multi-bottom wells a few hundred to a few thousand meters deep. Due to their character, drilling such wells creates a potential threat for all environmental elements. The degree of potential environmental impact depends on numerous factors, the most important of which include: location of a rig, level of urbanization of an area, sensitivity of environment to pollution, as well as type and scope of operations stimulating flux of hydrocarbons to the wells. Drilling natural gas prospecting and production wells involves a number of technological operations which generate significant noise emission, air pollution with exhaust gas from driving engines and significant quantities of waste, especially waste from matrix acidizing and fracturing. The paper presents results of analyses of noise emission and air pollution generated by drilling machines selected for drilling deep prospecting and exploitation wells. The investigations were focused on rigs Skytop TR-800, National 110 UE and IRI-750/Cabot, which differ in technical and technological parameters. The obtained results confirmed differences in environmental impact of individual types of rigs. The differences appeared related to distinct directional acoustic characteristics, oscillating noise level and magnitude of air pollution emissions. Figs. 1 and 2 show distribution of noise level A in proximity of rig IRI-750/Cabot and Skytop TR-800 during hoisting operations, and Fig. 3 - exemplary distributions of NO2 and H2S concentration in air near the rig during drilling operations. Types and quantities of waste generated in drilling natural gas wells to the depth of 3000 m and accompanying hydraulic fracturing of rocks, are also presented in the paper.
Źródło:
Przegląd Geologiczny; 2010, 58, 3; 266-270
0033-2151
Pojawia się w:
Przegląd Geologiczny
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The influence of prospecting unconventional hydrocarbon reservoirs on acoustic climate
Autorzy:
Łukańko, Ł.
Macuda, J.
Powiązania:
https://bibliotekanauki.pl/articles/299205.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
drilling wells
drilling operations
exploration drilling
rig
shale gas
noise
noise emitted by rig
measurement of noise
Opis:
In Poland the perspective shale gas formations concentrate in the area of the Baltic Basin, Podlasie Depression and Lublin Basin. Their depth varies from slightly above 2,000 to 4,500 m, depending on the location. Accordingly, novel rigs of high hoisting capacity and installed power capacity of master motors have to be used for opening natural gas deposits with the use of directional wells. The operation of such systems creates an acoustic hazard for the environment, especially in the close vicinity to the rig. The results of noise analyses of a prospecting well for hydrocarbons from unconventional sources in the north of Poland performed with the use of a rig MASS 6000E are presentedin this paper. The noise analyses concentrated on the rig area among the direct noise sources and the neighborhood to show the influence of drilling operations on the acoustic environment. The obtained results revealed that the noise emission in the rig area can be limited by optimizing the localization and placement of particular objects and systems within the rig site. This also applies to the placement of the noise barriers on the border of the rig to limit the noise emission towards objects requiring protection.
Źródło:
AGH Drilling, Oil, Gas; 2016, 33, 4; 747-755
2299-4157
2300-7052
Pojawia się w:
AGH Drilling, Oil, Gas
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of air pollution related to the “V” natural gas deposit exploitation
Autorzy:
Kulynych, V.
Maruta, M.
Powiązania:
https://bibliotekanauki.pl/articles/184724.pdf
Data publikacji:
2016
Wydawca:
Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie. Wydawnictwo AGH
Tematy:
environment
impact
drilling rig
Opis:
Exploitation of oil and gas deposits is often associated with a negative impact on the environment. This impact may be associated with the the activities on drilling rig, mine as well as situations in which there is a leakage or an eruption of a dangerous substance. The main sources of gaseous and particulate pollutants include the engines of drilling equipment and machines, boilers and transport used in the course of drilling, as well as the exploitation of the deposit. The risk of emissions of hazardous gases such as methane and hydrogen sulphide concentrations into the atmosphere occurs at the time of the eruption or leakage from the pipeline. The paper presents an attempt to assess the impact of the technical work related to the exploitation of “V” gas deposit on the atmosphere including a variant in which there was a rapid leakage of the gas system. It discusses the type of pollutants emitted into the environment, and estimates the amount of emissions related to the equipment on the deposit (boilers, engines). The authors performed modelling of selected exhausted gases from the boiler spread into the air. The authors also performed simulations of the spread of hydrogen sulphide and natural gas, which leaked into the atmosphere by the eruption due to pipeline damage. Modelling was performed based on hazard modelling software ALOHA (Areal Locations of Hazardous Atmospheres) created by the US Environmental Protection Agency (EPA). The modelling made possible to determine the impact of air pollution zones and zones of dangers caused by hydrogen sulphide. It so allowed to nominate the evacuation zones in case of an emergency situation.
Źródło:
Geology, Geophysics and Environment; 2016, 42, 1; 89
2299-8004
2353-0790
Pojawia się w:
Geology, Geophysics and Environment
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Technologie bezwykopowe na sześciu kontynentach, cz. 13
Autorzy:
Kuliczkowska, E.
Kotwica, K.
Nogaj, S.
Powiązania:
https://bibliotekanauki.pl/articles/363886.pdf
Data publikacji:
2016
Wydawca:
Nowoczesne Budownictwo Inżynieryjne
Tematy:
technologie bezwykopowe
technologia powłok utwardzanych
kanalizacja
hydrodynamiczne czyszczenie
wiertnica
trenchless technologies
cured coating technology
sewers
hydrodynamic cleaning
drilling rig
Opis:
W cyklu Technologie bezwykopowe na sześciu kontynentach, przygotowywanym we współpracy z Polską Fundacją Technik Bezwykopowych, przedstawiamy skrót najciekawszych artykułów zamieszczonych w 31. numerze „Trenchless International” (wiosna 2016).
Źródło:
Nowoczesne Budownictwo Inżynieryjne; 2016, 6; 88-93
1734-6681
Pojawia się w:
Nowoczesne Budownictwo Inżynieryjne
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Samojezdne maszyny górnicze zasilane bateryjnie
Battery powered underground mining machines
Autorzy:
Kozłowski, Artur
Bołoz, Łukasz
Czajkowski, Andrzej
Ostapów, Lesław
Powiązania:
https://bibliotekanauki.pl/articles/2097689.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Górnictwa
Tematy:
napęd bateryjny
zasilanie bateryjne
samojezdne maszyny górnicze
elektryczne maszyny górnicze
wóz wiercący
wóz kotwiący
battery drive
battery power
supply mining machines
electric mining machines
control algorithms
drilling rig
bolting rig
Opis:
W przedmiotowym artykule przedstawiono dwie samojezdne elektryczne maszyny górnicze zasilane bateryjnie, przeznaczone do pracy w warunkach polskiej kopalni rud miedzi. Obecnie w górnictwie światowym obserwuje się rosnące zainteresowanie maszynami elektrycznymi zasilanymi bateryjnie, które zastępują rozwiązania napędzane silnikami spalinowymi. W wyniku współpracy firmy Mine Master, Sieci Badawczej Łukasiewicz – Instytutu Technik Innowacyjnych EMAG oraz AGH w Krakowie zrealizowano szereg prac, które pozwoliły w rezultacie na wyprodukowanie dwóch zupełnie nowych maszyn. W celu opracowania wymagań i założeń do projektowanych układów napędowych z zasilaniem bateryjnym przeprowadzono badania dołowe istniejących maszyn spalinowych. Wykorzystując wyniki tych badań, opracowano układy zasilania oraz algorytmy sterowania, które zostały zweryfikowane w środowisku wirtualnym. Następnie opracowano i wykonano laboratoryjne stanowisko badawcze, na którym przeprowadzono walidację układów zasilania i algorytmów sterowania. Podczas badań sprawdzono wszystkie możliwe sytuacje, w których bateria jest rozładowywana w wyniku jazdy lub pracy oraz ładowana z sieci kopalnianej lub energią odzyskaną podczas hamowania. Na stanowisku badawczym zasymulowano również niepożądane sytuacje, jak wahania napięcia zasilana czy ograniczenie mocy ładowania. Uzyskano pozytywne wyniki testów. Finalnie układy zasilania wraz z algorytmami sterowania zostały zaimplementowane i sprawdzone w wyprodukowanych maszynach bateryjnych, podczas prób ruchowych.
This article discusses the work which resulted in the development of two battery-powered self-propelled electric mining machines intended for operation in the conditions of a Polish copper ore mine. Currently, the global mining industry is seeing a growing interest in battery-powered electric machines, which are replacing solutions powered by internal combustion engines. The cooperation of Mine Master, Łukasiewicz Research Network - Institute of Innovative Technologies EMAG and AGH University of Science and Technology allowed carrying out a number of works which resulted in the production of two completely new machines. In order to develop the requirements and assumptions for the designed battery-powered propulsion systems, underground tests of the existing combustion machines were carried out. Based on the results of these tests, power supply systems and control algorithms were developed and verified in a virtual environment. Next, a laboratory test stand for validating power supply systems and control algorithms was developed and constructed. The tests were aimed at checking all possible situations in which the battery gets discharged as a result of the machine’s ride or operation, and when it is charged from the mine’s mains or with energy recovered during braking. Simulations of undesirable situations, such as fluctuations in the supply voltage or charging power limitation, were also carried out at the test stand. Positive test results were obtained. Finally, the power supply systems along with control algorithms were implemented and tested in the produced battery-powered machines during operational trials. The power systems and control algorithms are universal enough to be implemented in two different types of machines.
Źródło:
Przegląd Górniczy; 2021, 77, 10-12; 44--53
0033-216X
Pojawia się w:
Przegląd Górniczy
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies