- Tytuł:
- Evaluation of the Chemical Composition, TG – DTA and Tensile Strength Tests of Commercial Gypsum Kinds for Foundry Sandmixes Application
- Autorzy:
-
Paduchowicz, P.
Stachowicz, M.
Baszczuk, A.
Hasiak, M.
Granat, K. - Powiązania:
- https://bibliotekanauki.pl/articles/947630.pdf
- Data publikacji:
- 2020
- Wydawca:
- Polska Akademia Nauk. Czytelnia Czasopism PAN
- Tematy:
-
foundry
gypsum
binding material
derivatographic method
odlew
gips
materiał wiążący
badania derywatograficzne - Opis:
- The paper presents the preliminary results of research on determining the possibilities of using available on the market commercial gypsum kinds as a binder for foundry moulding and core sandmixes. Construction gypsum and plaster gypsum, finishing coat and jewelry casting gypsum were tested. Elemental composition of gypsum kinds were carried out using a scanning electron microscope (SEM) with EDS/EDX probe, their crystal structure and phase composition was determined by analyzing the results of X-ray diffraction measurements (XRD) and thermogravimetric studies (TG-DTA). Evaluation of the mechanical properties of selected materials was carried out at the tensile strength test of the dog-bone samples after initial hardening of gypsum mortar at 25°C for 5 h and drying at 110°C for 24 hours. The impact of the properties of the used commercial gypsum kinds on the possibility of their use as a valuable binders in the manufacture of the foundry sandmixes for moulds and cores was evaluated. Construction gypsum and finishing coat have the highest tensile strength. Plaster gypsum and finishing coat have the longest setting time. In all tested types of gypsum, the initial water loss during heating occurs at a temperature of about 200°C. The lowest valuable properties as a binder for sand moulding mixtures has jewelry casting gypsum mass.
- Źródło:
-
Archives of Foundry Engineering; 2020, 20, 2; 59-64
1897-3310
2299-2944 - Pojawia się w:
- Archives of Foundry Engineering
- Dostawca treści:
- Biblioteka Nauki
Artykuł