Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "cyclic loading" wg kryterium: Temat


Tytuł:
Effect of support on mechanical properties of the intervertebral disc in long-term compression testing
Autorzy:
Żak, M.
Powiązania:
https://bibliotekanauki.pl/articles/280607.pdf
Data publikacji:
2014
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
spine
intervertebral disc
cyclic loading
viscoelastic properties
energy dissipation
Opis:
The complex kinematic structure and the method of support of the spinal motion segments significantly influence mechanical properties of the intervertebral disc (IVD). Because of this, the aim of this study was to analyse the effect of support of the spinal motion segment on selected mechanical properties of the intervertebral disc. The research involved two groups of study: with intact segments (IS) and with acutely injured segments (AIS). In a long-term cyclic compression test, the spinal segments were loaded with a force of 150-650N. The study has shown that in the case of damage to articular processes, intervertebral disc height decreases by 0.09mm, and this decrease is 50% greater than in the case of intact segments. The most significant increase in the stiffness coefficient, greater by 63% in the case of injured segments, occurs after 50 000 cycles, which leads to pathological changes taking place in the structure of annulus fibrosus. In assessing the mechanical properties presented in this study, we should bear in mind that this is not a description of the properties of the intervertebral disc alone but also of the elements working with it.
Źródło:
Journal of Theoretical and Applied Mechanics; 2014, 52, 3; 677-686
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Badania wpływu obciążeń cyklicznych na ściśliwość gytii
Research on the effect of cyclic loading on gyttja compressibility
Autorzy:
Wojnicka-Janowska, E.
Powiązania:
https://bibliotekanauki.pl/articles/372160.pdf
Data publikacji:
2010
Wydawca:
Uniwersytet Zielonogórski. Oficyna Wydawnicza
Tematy:
gytia wapienna
ściśliwość
obciążenia cykliczne
gyttja
compressibility
cyclic loading
Opis:
W artykule przedstawiono wyniki badań ściśliwości gytii wapiennej z Międzyrzecza, poddanej obciążeniom cyklicznym w edometrze. Badania pozwoliły na ustalenie zależności korelacyjnych między odkształceniami oraz wartością modułów ściśliwości a ilością cykli obciążeń.
The article presents the results of the research on the compressibility of calcareous gyttja from the region of Międzyrzecz that was subjected to cyclic loading in oedometer. The research made it possible to determine correlations that exist among strains, the compressibility module value and the number of loading cycles.
Źródło:
Zeszyty Naukowe. Inżynieria Środowiska / Uniwersytet Zielonogórski; 2010, 139 (19); 136-142
1895-7323
Pojawia się w:
Zeszyty Naukowe. Inżynieria Środowiska / Uniwersytet Zielonogórski
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The Coupled Eulerian-Lagrangian Analysis of the KOBO Extrusion Process
Autorzy:
Wójcik, Marta
Skrzat, Andrzej
Powiązania:
https://bibliotekanauki.pl/articles/2024076.pdf
Data publikacji:
2021
Wydawca:
Stowarzyszenie Inżynierów i Techników Mechaników Polskich
Tematy:
coupled Eulerian-Lagrangian method
KOBO extrusion
metal forming
finite element method
hardening parameters
cyclic loading
metoda sprzężona Eulera-Lagrangiana
wytłaczanie KOBO
obróbka plastyczna
metoda elementów skończonych
parametry hartowania
obciążenie cykliczne
Opis:
The KOBO extrusion is an unconventional elastic-plastic deformation process in which the phenomenon of chang- ing a path of plastic deformation due to die cyclic oscillations by a given angle and with a given frequency is applied. As the result of the application of the oscillating rotary motion of the die, the reduction of the extrusion force was obtained. The numerical study of the KOBO extrusion of metallic materials was presented in this paper. The three-dimensional coupled Eulerian-Lagrangian (CEL) analysis was applied. The relationship between the extrusion force and the punch displacement during the KOBO process was achieved. The effective plastic strain distribution in the butt was found. The results of the numerical computations were compared with the experimen- tal data. The influence of the material hardening parameters on the cyclic loading phenomena (ratcheting, mean stress relaxation) in terms of the course of the KOBO extrusion was also examined. The proper determination of the material hardening parameters can help to optimize the KOBO process in terms of the reduction the extrusion force and the choice of the amount of die oscillations.
Źródło:
Advances in Science and Technology. Research Journal; 2021, 15, 1; 197-208
2299-8624
Pojawia się w:
Advances in Science and Technology. Research Journal
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Comparison of low and high frequency fatigue tests
Autorzy:
Vasko, A.
Belan, J.
Kucharikova, L.
Powiązania:
https://bibliotekanauki.pl/articles/111844.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
fatigue test
low frequency cyclic loading
high frequency cyclic loading
nodular cast iron
test zmęczeniowy
cykliczne obciążenie niskoczęstotliwościowe
cykliczne obciążenie o wysokiej częstotliwości
żeliwo sferoidalne
Opis:
The paper presents the results of low and high frequency fatigue tests carried out on nodular cast iron. The specimens of synthetic nodular cast irons from three different melts were studied in the high cycle fatigue region (from 105 to 108 cycles) using fatigue experimental equipments for low and high frequency cyclic loading. Low frequency fatigue tests were carried out at frequency f ≈ 120 Hz using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100; high frequency fatigue tests were carried out at frequency f ≈ 20 kHz using the ultrasonic fatigue testing device KAUP-ZU. Both fatigue tests were realised at sinusoidal cyclic push-pull loading (stress ratio R = –1) at ambient temperature (T = 20 ± 5 °C).
Źródło:
Production Engineering Archives; 2017, 17; 15-18
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Fatigue Properties of Nodular Cast Iron at Low Frequency Cyclic Loading
Autorzy:
Vaško, A.
Powiązania:
https://bibliotekanauki.pl/articles/353103.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
fatigue test
low frequency cyclic loading
nodular cast iron
steel scrap
silicon carbide
Opis:
Three melts of ferrite-pearlitic nodular cast iron with different charge composition were used for fatigue tests. Wöhler fatigue curves and fatigue strength were obtained, and microstructure and fracture surfaces were investigated. The aim of the paper is to determine the influence of charge composition on microstructure, mechanical and fatigue properties of synthetic nodular cast irons and their micromechanisms of failure. Fatigue tests were realised at low frequency sinusoidal cyclic push-pull loading (stress ratio R = −1) at ambient temperature (T = 20 ±5°C). They were carried out with using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100 at frequency f ≈ 120 Hz. The results of fatigue tests at low frequency cyclic loading are compared with fatigue properties at high frequency cyclic loadin.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 4; 2205-2210
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modeling of multiaxial state of stress and determine the fatigue lifetime for aluminum alloy during cyclic loadingunder in-and-out of phase shift Φ = 0° and Φ = 90
Autorzy:
Uhríčik, Milan
Kopas, Peter
Sága, Milan
Powiązania:
https://bibliotekanauki.pl/articles/41204259.pdf
Data publikacji:
2011
Wydawca:
Uniwersytet Kazimierza Wielkiego w Bydgoszczy
Tematy:
sinusoidal cyclic loading
multiaxial fatigue
stress
structural material
Opis:
This article deals with determining of fatigue lifetime of structural materials during by multiaxial cyclic loading. The theoretical part deals with the fatigue and with the criterions for evaluation of multiaxial fatigue lifetime. The experimental part deals with modeling of combined bending - torsion loading and determining the number of cycles to fracture in region low-cycle and high-cycle fatigue and also during of loading with the sinusoidal wave form under in phase Φ = 0° and out phase Φ = 90°.
Źródło:
Studia i Materiały Informatyki Stosowanej; 2011, 5; 9-13
1689-6300
Pojawia się w:
Studia i Materiały Informatyki Stosowanej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Multiaxial fatigue experimental analysis of 6063-T66 aluminum alloy of the base material and the welded material
Autorzy:
Uhríčik, Milan
Kopas, Peter
Palček, Peter
Oršulová, Tatiana
Hanusová, Patrícia
Powiązania:
https://bibliotekanauki.pl/articles/103995.pdf
Data publikacji:
2019
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
multiaxial fatigue
aluminum alloy
fatigue criteria
welding
cyclic loading
zmęczenie wieloosiowe
stop aluminium
kryteria zmęczeniowe
spawanie
obciążenie cykliczne
Opis:
This article deals with determining of fatigue lifetime of aluminum alloy 6063-T66 during by multiaxial cyclic loading. The experiments deal with the testing of specimens for identification of the strain-life behavior of material, the modeling of combined loading and determining the number of cycles to fracture in the region of low-cycle fatigue. Fatigue tests under constant amplitude loading were performed in a standard electromechanical machine with a suitable gripping system. Based on the experimental results the fatigue design curves are compared to the fatigue data from the base material and the welded material and also multiaxial fatigue models, which are able to predict fatigue life at different loads.
Źródło:
Quality Production Improvement - QPI; 2019, 1, 1; 334-341
2657-8603
Pojawia się w:
Quality Production Improvement - QPI
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Effect of cyclic loading on the internal damping of magnesium alloy AZ31
Autorzy:
Uhricik, M.
Dresslerova, Z.
Palcek, P.
Powiązania:
https://bibliotekanauki.pl/articles/111710.pdf
Data publikacji:
2017
Wydawca:
Stowarzyszenie Menedżerów Jakości i Produkcji
Tematy:
magnesium alloy
resonant frequency
internal damping
cyclic loading
stop magnezu
częstotliwość rezonansowa
tłumienie wewnętrzne
cykliczne ładowanie
Opis:
The article focuses on the analysis of the internal damping changes depending on the amplitude of the magnesium alloy AZ31. Internal damping reflects the ability of the material irreversibly dissipating mechanical energy oscillations. It means that the material of high internal damping ability is able to significantly reduce the vibration amplitude. Internal damping is, generally, dependent on many factors (temperature, material purity, grain size, mechanical and thermal processing, etc.) and its value is determined by interactions between various mechanisms dissipation of mechanical energy. Ultrasonic resonance method was used in experimental measurements, which is based on continuous excitation of oscillations of the specimen, and the entire apparatus vibrates at a frequency which is near to the resonance. Starting resonance frequency for all measurements was about f = 20470 Hz.
Źródło:
Production Engineering Archives; 2017, 15; 7-10
2353-5156
2353-7779
Pojawia się w:
Production Engineering Archives
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Material responses to the laboratory simulation of complex cyclic loadings
Autorzy:
Szymczak, T.
Kowalewski, Z. L.
Rutecka, A.
Powiązania:
https://bibliotekanauki.pl/articles/243514.pdf
Data publikacji:
2008
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
cyclic proportional and non-proportional loading
yield surface
complex stress state
hardening
softening
Opis:
The paper presents investigations identifying an influence of complex cyclic loading controlled by the strain signals on the selected mechanical properties of the 2024 aluminium alloy. Investigations of proportional and non-proportional loading paths in the form of square and circle were carried out at room temperature using thin-walled tubular specimens enabling realisation of complex stress states due to acting of axial force and twisting moment. The hardening effect of the material due to cyclic loading was observed on the basis of: stress responses into the strain controlled loading programme; hysteresis loop variations and amounts of stress amplitude. In the case of the non-proportional cyclic loading an additional hardening effect was identified. Second-order effects, which allow better understanding of the influence of proportional and non-proportional loading paths on mechanical behaviour of engineering materials, were identified. In the case of the circular loading path a delay of the maximum stress signals with respect to strain ones is demonstrated. For the square loading path a softening effect was observed. It is reflected by the rapid stress drop on this direction, which is perpendicular to that where the stress level begins to turn back. The yield surface approach is also applied in order to assess the mechanical properties variations due to cyclic loading of the material.
Źródło:
Journal of KONES; 2008, 15, 3; 509-516
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Ocena trwałości zmęczeniowej końcówki drążka kierowniczego
Experimental assessment of fatigue durability of steering rod tip
Autorzy:
Szymczak, T.
Brodecki, A.
Kowalewski, Z.
Lasota, P.
Powiązania:
https://bibliotekanauki.pl/articles/107581.pdf
Data publikacji:
2018
Wydawca:
Instytut Transportu Samochodowego
Tematy:
przegub
zmęczenie
obciążenie zmienne cyklicznie
liczba cykli
trwałość
pęknięcie
rod tip
fatigue
cyclic loading
number of cycles
durability
crack
Opis:
W pracy zaprezentowano wyniki badań trwałościowych końcówki drążka kierowniczego pojazdu o dmc powyżej 3.5 tony. W badaniach wykorzystywano wielkogabarytową platformę wibroizolowaną, serwohydrauliczny siłownik mobilny oraz cyfrowy kontroler sygnałów IST Instron. Próby prowadzono w warunkach działania obciążenia zmiennego cyklicznie do uzyskania 2×106 cykli. Ze względu na kompleksową ocenę zachowania końcówki drążka kierowniczego testy przerywano, by wykonywać oględziny obiektu badań. Wyznaczono zmiany kąta wychylenia oraz momentu siły w funkcji liczby cykli oraz przedstawiono ich prognozę. Omówiono procedurę badawczą służącą ocenie trwałości przegubu kulistego.
The paper reports results from test of steering rod tip used in car having permissible total mass above 3.5 t. Anti-vibration platform, servo-hydraulic actuator and digital controller IST Instron were used to execute the tests. The experiments were carried out under cyclic loading up to 2×106 cycles. The tests were interrupted for inspecting the examined object. Variations of angle and force moment and prediction of their values versus number of cycles are presented. Details of experimental procedure for evaluation of steering rod tip are provided.
Źródło:
Transport Samochodowy; 2018, 2; 63-72
1731-2795
Pojawia się w:
Transport Samochodowy
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Variations of mechanical parameters and strain energy dissipated during tension-torsion loading
Zmiany parametrów mechanicznych oraz energii dysypowanej podczas jednoczesnego rozciągania i skręcania
Autorzy:
Szymczak, T.
Kowalewski, Z. L.
Powiązania:
https://bibliotekanauki.pl/articles/354493.pdf
Data publikacji:
2012
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
obciążenia złożone
dwuosiowy stan naprężenia
obciążenie cykliczne
parametry mechaniczne
biaxial stress state
cyclic loading
mechanical parameters
Opis:
The paper presents behaviour of materials under complex loading being combinations of torsion-reverse-torsion cycles superimposed on monotonic tensile deformation. The 2024 aluminium alloy, P91 steel and M1E copper were investigated under plane stress state using thin-walled tubular specimens. All tests were strain controlled and a total strain was less than 1%. An influence of torsion cycles on tensile characteristic was manifested by lowering of the proportional limit and yield point. This effect was increased with magnification of cyclic strain amplitude and in the case of copper a reduction of yield point was equal around 90%. A character of this effect was checked using the yield surface concept after each test. The papers also presents, variations of tangential hardening modulus and plastic strain energy dissipation.
W pracy zamieszczono wyniki badań prezentujące zachowanie materiałów w warunkach złożonego obciążenia będącego kombinacją cyklicznego skręcania i monotonicznego rozciągania. Badaniom poddano stop aluminium 2024, stal P91 oraz miedź M1E w postaci próbek rurkowych zapewniających realizację płaskiego stanu naprężenia. Wszystkie testy zostały przeprowadzone przy sterowaniu sygnałem odkształcenia, przy czym odkształcenie całkowite nie przekraczało 1%. Badania wykazały znaczny wpływ obecności cykli skrętnych na przebieg jednocześnie realizowanego monotonicznego rozciągania widoczny w postaci obniżenia granicy proporcjonalności oraz granicy plastyczności. Efekt ten powiększał się wraz ze wzrostem amplitudy obciążenia cyklicznego, i w przypadku miedzi spadek wymienionych parametrów osiągnął ok. 90% w odniesieniu do wartości wyznaczonych na podstawie klasycznej próby rozciągania. Trwałość tego efektu została sprawdzona na podstawie analizy wymiarów powierzchni plastyczności. W pracy zaprezentowano także zmiany stycznego modułu wzmocnienia oraz energii odkształcenia plastycznego.
Źródło:
Archives of Metallurgy and Materials; 2012, 57, 1; 193-197
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Wpływ cyklicznego skręcania na właściwości mechaniczne materiałów w próbie rozciągania
An influence of cyclic torsion on mechanical properties of materials subjected to tensile test
Autorzy:
Szymczak, T.
Kowalewski, Z. L.
Powiązania:
https://bibliotekanauki.pl/articles/208520.pdf
Data publikacji:
2012
Wydawca:
Wojskowa Akademia Techniczna im. Jarosława Dąbrowskiego
Tematy:
mechanika eksperymentalna
obciążenie złożone
obciążenie cykliczne
właściwości mechaniczne
rozciąganie
skręcanie
experimental mechanics
complex loading
cyclic loading
mechanical properties
tension
torsion
Opis:
W pracy zamieszczono wyniki z badań doświadczalnych dotyczących określania wpływu obciążenia skręcającego o charakterze cyklicznym na przebieg wyznaczanej jednocześnie charakterystyki rozciągania następujących materiałów: stali P91, stopu aluminium PA7 oraz miedzi M1E. Testy przeprowadzono na cienkościennych, osiowosymetrycznych próbkach rurkowych w warunkach płaskiego stanu naprężenia przy sterowaniu sygnałami odkształcenia. Wyznaczono zmiany granicy proporcjonalności, plastyczności i stycznego modułu wzmocnienia w zależności od amplitudy odkształcenia postaciowego oraz opracowano przebiegi zmian naprężeń głównych i kąta obrotu ich kierunków.
The paper presents experimental results of tests devoted to evaluation of an influence of torsional cycles on the tensile characteristic of the following engineering materials: P91 steel, PA7 aluminium alloy, and M1E copper. All tests were carried out using thin-walled tubular specimens under biaxial stress state controlled by the strain signals. Variations of proportional limit, yield point, and tangential hardening modulus depending on amplitude of shear strain were determined. Changes of the principal stresses and rotation of their directions were also calculated.
Źródło:
Biuletyn Wojskowej Akademii Technicznej; 2012, 61, 2; 437-447
1234-5865
Pojawia się w:
Biuletyn Wojskowej Akademii Technicznej
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Modelling of Post-flotation Tailings Liquefaction Induced by Paraseismic Events
Autorzy:
Świdziński, W.
Powiązania:
https://bibliotekanauki.pl/articles/241270.pdf
Data publikacji:
2016
Wydawca:
Polska Akademia Nauk. Instytut Budownictwa Wodnego PAN
Tematy:
post-flotation tailings
cyclic loading
liquefaction
modelling
Opis:
This paper presents and discusses the results of numerical modelling of pore water pressure build-up in post-flotation saturated tailings deposited at the Tailings Storage Facility “Żelazny Most”, caused by seismic-induced dynamic loading. Numerical simulations were based on the compaction/liquefaction model proposed by A. Sawicki. The model parameters were determined in the laboratory for tailings sampled at the TSF “Żelazny Most”. The sensitivity of the numerical model was verified in a series of numerical tests for various horizontal acceleration amplitudes. In the main calculations, an accelerogram recorded during a real paraseimic event was assumed. The results obtained show that, with the current seismic activity near the TSF “Żelazny Most”, some pore water pressure is generated within the saturated tailings layer, but it does not trigger the liquefaction phenomenon.
Źródło:
Archives of Hydro-Engineering and Environmental Mechanics; 2016, 63, 2-3; 215-233
1231-3726
Pojawia się w:
Archives of Hydro-Engineering and Environmental Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Compressive deformation characteristics of crushed sandstone based on multiple experimental factors
Autorzy:
Sun, Yanan
Zhang, Peisen
Yan, Wei
Yan, Fenqian
Wu, Junda
Powiązania:
https://bibliotekanauki.pl/articles/219794.pdf
Data publikacji:
2020
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
mechanika skał
skały kruche
odkształcenie
rock mechanics
saturated graded crushed rock
compressive deformation
cyclic loading
cyclic unloading
Opis:
In this study, the compressive deformation of crushed sandstone was tested using a crushed rock deformation-seepage test system, and the effects of various factors, including crushed rock grade, grade combination, water saturation status, and stress loading method (i.e., continuous loading or cyclic loading and unloading), on the compressive deformation of crushed sandstone was analyzed from four perspectives including stress-strain, bulking coefficient, deformation mechanism and energy dissipation. The results indicate that the stress-strain relations of crushed sandstone are closely associated with all factors considered, and are well represented by exponential functions. The strain observed for a given applied stress increased with increasing crushed rock grade throughout the loading period. Crushed sandstone grades were combined according to a grading index (n), where the proportion of large-grade rocks in the sample increased with increasing n. The bearing capacity of a water-saturated crushed sandstone sample with n = 0.2 was less than that of an equivalent dry sample for a given applied stress. The stress-strain curve of a water-saturated crushed sandstone sample with n = 0.2 under cyclic loading and unloading was similar to that obtained under continuous loading. Observation and discovery, the deformation mechanism of crushed sandstone was mainly divided into four stages, including crushing, rupture, corner detachment and corner wear. And 20% of the work done by testing machine is used for friction between the crushed sandstone with the inner wall of the test chamber, and 80% is used for the closing of the void between the crushed sandstone, friction sliding, crushing damage.
Źródło:
Archives of Mining Sciences; 2020, 65, 1; 129-146
0860-7001
Pojawia się w:
Archives of Mining Sciences
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Antiplane deformation of a bimaterial containing an interfacial crack with the account of friction 2. Repeating and cyclic loading
Autorzy:
Sulym, H.
Piskozub, L.
Piskozub, Y.
Pasternak, I.
Powiązania:
https://bibliotekanauki.pl/articles/387479.pdf
Data publikacji:
2015
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
friction
tribofatigue
cyclic loading
interfacial crack
energy dissipation
stress intensity factor
antiplane deformation
bi-material
hysteresis
discontinuity functions
tarcie
obciążenie cykliczne
pęknięcia międzyfazowe
rozpraszanie energii
współczynnik intensywności naprężeń
histereza
bimateriał
Opis:
The paper presents the exact solution of the antiplane problem for an inhomogeneous bimaterial with the interface crack exposed to the normal load and cyclic loading by a concentrated force in the longitudinal direction. Using discontinuity function method the problem is reduced to the solution of singular integral equations for the displacement and stress discontinuities at the domains with sliding friction. The paper provides the analysis of the effect of friction and loading parameters on the size of these zones. Hysteretic behaviour of the stress and displacement discontinuities in these domains is observed.
Źródło:
Acta Mechanica et Automatica; 2015, 9, 3; 178-184
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies