Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "cortical bone" wg kryterium: Temat


Wyświetlanie 1-7 z 7
Tytuł:
Estimation of layer thickness by the cost function optimization: phantom study
Autorzy:
Tasinkiewicz, J.
Podhajecki, J.
Wojcik, J.
Falińska, K.
Litniewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/331862.pdf
Data publikacji:
2015
Wydawca:
Polskie Towarzystwo Akustyczne
Tematy:
cortical bone thickness assessment
layered media
ultrasound attenuation
Opis:
The aim of this work is to present preliminary results of the layer thickness assessment method based on optimization approach. The developed method is based on a multilayer model structure. The measured acoustic signal reflected from the layer is compared with a simulated signal on the basis of a multilayer model. The cost function is defined as the difference between the reflected signal measured using pulse echo approach and the simulated signal. The thickness of the solid layer is the parameter which minimizes the cost function yielding desired solution. Minimization of the cost function is performed with the simulated annealing algorithm. The results obtained with the developed method using measurement data of a custom design model are compared with the reference value and the accuracy of the method is checked. The relative error of the thickness estimation is 1.44%.
Źródło:
Hydroacoustics; 2015, 18; 161-166
1642-1817
Pojawia się w:
Hydroacoustics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Elasto-electric longitudin harmonic waves in porous long bones filled with physiological fluid
Podłużne harmoniczne fale sprężysto-elektryczne w porowatych kościach długich wypełnionych płynem fizjologicznym
Autorzy:
Uklejewski, R.
Powiązania:
https://bibliotekanauki.pl/articles/281332.pdf
Data publikacji:
1998
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
cortical bone
Biot's poroelasticity
electrokinetics
elasto-electric waves
Opis:
Transmission of elasto-electric longitudinal harmonic waves in porous long bones filled with physiological fluid is investigated. The complete set of equations of the problem is obtained on the basic of the Biot theory of elastic waves in fluid-saturated porous media and the linear equations of electrokinetics, by means of quantities analogous to those in the theory of electrical transmission lines. Experimental findings from the biomechanical literature, supporting applicability of the proposed description, are presented. The electric signal associated with the propagation of longitudinal elastic waves in a wet long bone shaft can potientially be used for monitoring these waves during their application in e.g. bone porosity measurements.
Przedmiotem pracy jest zagadnienie transmisji sprężysto-elektrycznych podłużnych fal harmonicznych w porowatych kościach długich wypełnionych płynem fizjologicznym. Zbiorczy układ równań zagadnienia wyprowadzono na podstawie Biotowskiej teorii propagacji fal sprężystych w ośrodkach porowatych nasyconych cieczą oraz liniowych liniowych równań elektrokinetyki, stosując opis za pomocą wielkości analogicznych do stosowanych w teorii elektrycznych linii przesyłowych. Uzasadniono przydatność zaproponowanego modelu teoretycznego przywołując z literatury wyniki badań eksperymentalnych dotyczące bioelektromechaniki kości. Sygnał elektryczny towarzyszący propagacji podłużnych fal sprężystych w trzonie kości długiej nasyconej płynem fizjologicznym mógłby, przypuszczalnie, zostać użyty celem monitorowania tych fal w zastosowaniu ich np. do pomiaru porowatości kości.
Źródło:
Journal of Theoretical and Applied Mechanics; 1998, 3; 819-838
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Numerical modelling of impact fracture of cortical bone tissue using X-FEM
Modelowanie numeryczne złamania uderzeniem istoty korowej kości za pomocą rozszerzonej metody elementów skończonych
Autorzy:
Abdel-Wahab, A. A.
Silberschmidt, V. V.
Powiązania:
https://bibliotekanauki.pl/articles/279242.pdf
Data publikacji:
2011
Wydawca:
Polskie Towarzystwo Mechaniki Teoretycznej i Stosowanej
Tematy:
cortical bone
impact
X-FEM
finite element method
fracture
Opis:
A cortical bone tissue is susceptible to fracture that can be caused by events, such as traumatic falls, sports injuries and traffic accidents. A proper treatment of bones and prevention of their fracture can be supported by in-depth understanding of deformation and fracture behaviour of this tissue in such dynamic events. Parameters such as damage initiation under impact, damage progression and impact strength can help to achieve this goal. In this paper, Extended Finite-Element Method (X- FEM) implemented into the commercial finite-element software Abaqus is used to simulate the actual crack initiation and growth in a cantilever beam of cortical bone exposed to quasi-static and impact loading using the Izod loading scheme. Izod tests were performed on notched bone specimens of bovine femur to measure its impact strength and to validate simulations. The simulation results show a good agreement with the experimental data.
Istota korowa kości jest tkanką podatną na złamanie wywołane m.in. takimi zdarzeniami jak upadki, kontuzje sportowe czy wypadki samochodowe. Odpowiednie leczenie czy profilaktyka stanu kości powinny być wsparte głębokim zrozumieniem zjawisk deformacji i pękania tej tkanki zachodzących podczas takich dynamicznych obciążeń. Znajomość parametrów opisujących inicjację uszkodzenia pod wpływem obciążenia uderzeniowego, progresja tego uszkodzenia i wreszcie odporność na złamanie może być pomocna w tej praktyce. W prezentowanej pracy przedyskutowano implementację rozszerzonej metody elementów skończonych (X-FEM) do standardowego i komercyjnego pakietu ABAQUS w celu symulacji faktycznych zjawisk towarzyszących inicjacji i propagacji pęknięcia belki wykonanej z materiału oddającego właściwości istoty korowej poddanej działaniu quasi-statycznych i uderzeniowych obciążeń, wspartej próbami udarnościowymi Izoda. Testy Izoda zostały przeprowadzone na przygotowanych próbkach z bydlęcej kości udowej z naciętym karbem w celu eksperymentalnej weryfikacji wytrzymałości na uderzenie. Rezultaty badań numerycznych wykazały dobrą zgodność z wynikami tych prób.
Źródło:
Journal of Theoretical and Applied Mechanics; 2011, 49, 3; 599-619
1429-2955
Pojawia się w:
Journal of Theoretical and Applied Mechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of three different preservative techniques on the mechanical properties of the ovine cortical bone
Autorzy:
Wieding, J.
Mick, E.
Wree, A.
Bader, R.
Powiązania:
https://bibliotekanauki.pl/articles/306558.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
właściwości mechaniczne
kość korowa
zamrażanie
mechanical properties
chemical preservatives
cortical bone
freezing
fresh bone samples
Opis:
Purpose: Preservative treatments are necessary for disinfection and long term storage when dealing with biological tissue. Freezing is a gold standard but infectious risk can only be eliminated by using chemical fluids that may alter the mechanical properties, depending on their composition. Therefore, we experimentally evaluated the influence of freezing and of two commonly used preservative fluids (formalin and alcohol) on the intrinsic mechanical properties of ovine cortical bone samples, compared to purely fresh samples. Methods: Prismatic specimens were prepared from the sheep’s metacarpal bones and were divided into four groups (fresh, fresh-frozen, formalin and alcohol). All samples underwent four-point-bending; fresh samples were tested immediately, preserved samples were tested after 14 days. Bending modulus, bending strength, yield strength and energy absorption for the elastic and plastic region were determined. Results: Significant differences were found for the plastic energy absorption for formalin (–41%) and alcohol (+37%) preservation compared to fresh samples. Formalin preservation revealed embrittlement of the cortical bone samples and alcohol preservation revealed higher ability of plastic energy absorption. Conclusions: Our results indicate that freezing has no influence on the mechanical properties of the ovine cortical bone. Preservation with chemical fluids (formalin and alcohol) showed no influence on the elastic properties but it was observed for the ability of plastic energy absorption. Therefore, these methods seem to be suitable for preservation without evident altering of the elastic mechanical properties.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 1; 137-146
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Biomechanical Analysis of Two-Point Asymmetric Screw Fixation with Implant for Femoral Neck Fracture
Autorzy:
Karev, B. D.
Barsukov, V. G.
Powiązania:
https://bibliotekanauki.pl/articles/386812.pdf
Data publikacji:
2012
Wydawca:
Politechnika Białostocka. Oficyna Wydawnicza Politechniki Białostockiej
Tematy:
pęknięcie kości
mocowanie śrubowe
kość korowa
kość beleczkowa
femoral neck fracture
screw fixation
stressed state
cortical bone
trabecular bone
Opis:
Stressed state peculiarities of cortical and trabecular bones by two,point asymmetric screw fixation with implant for femoral neck fracture are studied. Layer construction mechanic methods are used for analysis of stresses in cortical and trabecular bones. Biomechanical conditions for non,opening of the junction of the bone parts being joined are determined. It has been found that the total tightness of the broken parts when they rest against each other is secured over the whole fracture section without junction opening under condition that fixing screws are positioned in the trabecular bone without penetration of the thread side surface into cortical bone.
Źródło:
Acta Mechanica et Automatica; 2012, 6, 4; 19-22
1898-4088
2300-5319
Pojawia się w:
Acta Mechanica et Automatica
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
A numerical study on indentation properties of cortical bone tissue : Influence of anisotropy
Autorzy:
Demiral, M.
Abdel-Wahab, A.
Silberschmidt, V.
Powiązania:
https://bibliotekanauki.pl/articles/306784.pdf
Data publikacji:
2015
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
analiza MES
anizotropia
metoda Olivera i Pharra
identacja
finite element analysis
anisotropy
Oliver–Pharr method
cortical bone tissue
indentation
Opis:
Purpose: The purpose of this study is to investigate the effect of anisotropy of cortical bone tissue on measurement of properties such as direction-dependent moduli and hardness. Methods: An advanced three-dimensional finite element model of microindentation was developed. Different modelling schemes were considered to account for anisotropy of elastic or/and plastic regimes. The elastic anisotropic behaviour was modelled employing an elasticity tensor, and Hill’s criteria were used to represent the direction-dependent post-yield behaviour. The Oliver–Pharr method was used in the data analysis. Results: A decrease in the value of the transverse elasticity modulus resulted in the increased material’s indentation modulus measured in the longitudinal direction and a decreased one in the transverse direction, while they were insensitive to the anisotropy in post-elastic regime. On the other hand, an increase in plastic anisotropy led to a decrease in measured hardness for both directions, but by a larger amount in the transverse one. The size effect phenomenon was found to be also sensitive to anisotropy. Conclusions: The undertaken analysis suggests that the Oliver–Pharr method is a useful tool for first-order approximations in the analysis of mechanical properties of anisotropic materials similar to cortical bone, but not necessarily for the materials with low hardening reserves in the plastic regime.
Źródło:
Acta of Bioengineering and Biomechanics; 2015, 17, 2; 3-14
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Microdamage distribution in fatigue fractures of bone allografts following gamma-ray exposure
Autorzy:
Presbítero, G.
Hernandez-Rodríguez, M. A. L.
Contreras-Hernandez, G. R.
Vilchez, J. F.
Susarrey, O.
Gutiérrez, D.
Powiązania:
https://bibliotekanauki.pl/articles/307297.pdf
Data publikacji:
2017
Wydawca:
Politechnika Wrocławska. Oficyna Wydawnicza Politechniki Wrocławskiej
Tematy:
rozkład Weibulla
pękanie zmęczeniowe
promieniowanie gamma
kość korowa
mikrouszkodzenia
allografts
Weibull distribution
fatigue fracture
gamma radiation
cortical bone
microdamage
Opis:
Although clear evidence of significant differences in bone properties have been extensively studied, results vary under the ranges usually used for sterilization purposes (25-35 kGy). Hence, the aim of this work was the study of the mechanical properties and microdamage development of human bones used as allografts following gamma-ray exposure, followed by an extensive statistical analysis of microdamage effects in fatigue behaviour. Methods: Specimens of the cortical region of human femurs were exposed to 15-25 kGy and 26-30 kGy radiation levels, then they were subjected to compression fatigue tests until fracture. The fatigue life was determined in relation to the radiation level, and the evolution of microdamage was assessed through fluorescence microscopy in order to calculate characteristic lengths of microcracks. Results: Significant differences in fatigue life were detected (p < 0.05) between non-radiated (control) and radiated specimens, resulting in a drastic 89.2% fatigue life reduction of the 15-25 kGy group, and 95.3% in the 26-30 kGy group in comparison to the control. Microdamage analysis showed a considerable increase in microcrack lengths when bone was exposed to gamma radiation, which may indicate that bones used as allografts could fracture at some point when subjected to in vivo loading conditions. Conclusions: The results of our research indicate that, even if a range of 15-25 kGy is suggested to sterilize bone allografts, such practice needs to be reconsidered. In addition, with use of Weibull distribution, this work describes the conditions in which microcracks grow towards the fracture of bones in relation to the decrease in their mechanical properties.
Źródło:
Acta of Bioengineering and Biomechanics; 2017, 19, 4; 43-53
1509-409X
2450-6303
Pojawia się w:
Acta of Bioengineering and Biomechanics
Dostawca treści:
Biblioteka Nauki
Artykuł
    Wyświetlanie 1-7 z 7

    Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies