Informacja

Drogi użytkowniku, aplikacja do prawidłowego działania wymaga obsługi JavaScript. Proszę włącz obsługę JavaScript w Twojej przeglądarce.

Wyszukujesz frazę "cooling system" wg kryterium: Temat


Tytuł:
Solar air conditioning system using desiccant wheel technology as a solution for Iraq
Autorzy:
Al-Ahmedi, Karrar
Powiązania:
https://bibliotekanauki.pl/articles/132049.pdf
Data publikacji:
2019
Wydawca:
Centrum Rzeczoznawstwa Budowlanego Sp. z o.o.
Tematy:
cooling
solar electric cooling system
solar thermal cooling system
Opis:
The electrical energy consumption in Iraq has increased sharply in the past few years. Modern energy efficient technologies are desperately needed for the national energy policy. The main purpose of this paper is to analyze the various cooling systems, using the readily available solar energy to cool down the buildings in Iraq during hot weather days. This paper presents the best solar cooling system which can be installed in Iraq for solar cooling. It also focuses on the type of thermally driven system which can be used for solar cooling. It is fact that many buildings in Iraq are designed far away from being energy efficient, hence this paper focuses on the standards which can be developed and can be used in the future on residential buildings from the energy point of view, with a suggestion to establish such solar cooling projects in Iraq. Systems have been used successfully in northern Europe and a number of studies have demonstrated that solar energy can be used to drive the system in this region. However, to date, desiccant cooling has not been used in Iraq. This paper presents the results of a study, in which a solar desiccant cooling model will use to evaluate the potential for using solar power to drive a desiccant cooling system in Iraq. The study demonstrates that solar desiccant cooling is feasible in Iraq, provided that the latent heat gains experienced are not excessive. However, if the relative humidity experienced are too high then desiccant cooling becomes impracticable simply because the regeneration temperatures required are excessive.
Źródło:
Modern Engineering; 2019, 2; 88-93
2450-5501
Pojawia się w:
Modern Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Practical Approach to Optimal Cooling System Design for a Production Line Consisting of Plastic Injection Moulding Machines in Polish Specific Climat Conditions
Autorzy:
Bernacki, Maciej
Kaminski, Piotr
Powiązania:
https://bibliotekanauki.pl/articles/2064691.pdf
Data publikacji:
2020
Wydawca:
STE GROUP
Tematy:
cooling system
injection moulding
dry cooling
Opis:
The paper presents and describes cooling systems mainly used in industrial plants specialized in production based on injection moulding machines. Each solution is rated taking into account investment costs, technical complexity, exploitation costs and system flexibility in general. With regard to dynamically changing law regulations linked to refrigeration installations, mainly F-Gases Act, during optimal system selection new restrictions were respected. This approach ensures long-term exploitation without additional complications. The paper contains characteristics of cooled facility, i.e. production plastic plant using injection moulding machines, presents specifics for this type of application where two extremely different cooling processes are placed in parallel. One task is heat collection from injection moulds to ensure short production time and produced details recurrence, the second is keeping hydraulic oil temperature between temperature limits – this process ensures proper oil viscosity and prevents its premature wear.
Źródło:
Multidisciplinary Aspects of Production Engineering; 2020, 3, 1; 116--127
2545-2827
Pojawia się w:
Multidisciplinary Aspects of Production Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Tendencje rozwojowe układów chłodzenia silników samochodowych
Development trends of automotive engine cooling systems
Autorzy:
Kneba, Z.
Powiązania:
https://bibliotekanauki.pl/articles/133214.pdf
Data publikacji:
2013
Wydawca:
Polskie Towarzystwo Naukowe Silników Spalinowych
Tematy:
układ chłodzenia silnika
sterowanie układem chłodzenia
engine cooling system
cooling system control
Opis:
Dzięki daleko idącym modyfikacjom układów zasilania i zapłonu silników samochodowych oraz udoskonaleniom układów oczyszczania spalin uzyskano znaczne zmniejszenie emisji związków toksycznych. Układy chłodzenia z pompą cieczy napędzaną mechanicznie stają się archaiczne nie pozwalając na swobodne sterowanie obiegiem cieczy. Również różna wartość temperatury potrzebnej do schładzania różnych procesów wymaga sterowanych zaworów trójdrożnych . Artykuł opisuje sterowanie elektroniczne obecnie wprowadzane do układów chłodzenia.
The far-reaching modifications power systems and ignition automobile engines and aftertreatment improvements achieved significant reduction in toxic emissions. Cooling fluid pump driven mechanically become archaic not allowing the free circulation of fluid control. Also, various temperature levels needed for different cooling processes require controlled three-way valve. The article describes the electronic control currently introduced into the cooling system.
Źródło:
Combustion Engines; 2013, 52, 3; 291-296
2300-9896
2658-1442
Pojawia się w:
Combustion Engines
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of speed and load on the engine temperature at an elevated temperature cooling fluid
Autorzy:
Krakowski, R.
Powiązania:
https://bibliotekanauki.pl/articles/243666.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
combustion engines
cooling system
coolant temperature
Opis:
In this article has been found that the most popular and widely used method of cooling is liquid cooling, which ensures uniformity of temperature around the combustion chamber and easy acquisition and transfer of heat, although the properties of water are limited by maximum temperature of the coolant. Preliminary scientific research of such a system indicates the possibility of increasing overall efficiency and reducing toxic components in exhaust gases at low engine loads when the engine exhaust temperature of the classic system is too low for efficient catalytic action. This paper presents the dynamometer test stand designed and built using original components of diesel engine 4CT90 production of WSW "ANDORIA" SA. Presented system was designed for the four cylinder with indirect fuel injection system. Research was made on the engine dynamometer stand, which was equipped with standard measure devices (measures: speed, torque, temperatures, flows) and exhaust gas analysers. The temperature of this liquid was increased to the higher level than temperature of boiling water in normal conditions. Overpressure inside the cooling system was limited to 0.3 MPa, the temperature inside the cooling system was increased to 115–120°C. During the test, the cooling system was filled with coolant at 90%. The selected results of investigations of the cooling system for the combustion engine working with higher temperature of the cooling liquid, where the influence of speed and load on the engine temperature were presented.
Źródło:
Journal of KONES; 2013, 20, 4; 185-192
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
New Technological Concept for Thermal Spray Protective Coatings
Autorzy:
Szczucka-Lasota, B.
Piwnik, J.
Powiązania:
https://bibliotekanauki.pl/articles/353107.pdf
Data publikacji:
2017
Wydawca:
Polska Akademia Nauk. Czytelnia Czasopism PAN
Tematy:
cooling system
micro-injector
technological concept
Opis:
Thermally spraying with micro-jet cooling is an innovate technology. It is possible to get fine dispersive structure of coatings during the shorter time in comparable to the classical high velocity oxygen fuel process (HVOF). It corresponds with good corrosion-erosion properties of structure. In the paper the parameters of the spraying with micro-jet cooling process are presented. The selected properties of coatings obtained by hybrid method are presented. The results of wear tests for hybrid and HVOF coating are compared. Results of investigation are very optimistic. The presented technology should be adapted to the actual production of protective coating for machines and construction working in wear conditions.
Źródło:
Archives of Metallurgy and Materials; 2017, 62, 3; 1499-1504
1733-3490
Pojawia się w:
Archives of Metallurgy and Materials
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Cooling of removable battery pack in the electric car
Autorzy:
Mitianiec, W.
Powiązania:
https://bibliotekanauki.pl/articles/241767.pdf
Data publikacji:
2013
Wydawca:
Instytut Techniczny Wojsk Lotniczych
Tematy:
transport
electric cars
battery
cooling system
Opis:
The thermal management system is the one most important unit in the electric car which controls temperature of electric devices by obtaining a stability of their operation in different load and ambient conditions. For the other side the removable pack installed in the closed cradle for easier service during exchange of the modules should be cooled by the air. It is also better for safety during exploitation for the vehicle parts and people. The paper presents the proposal of ventilation of battery packs, assumptions of the battery pack cooling system, mathematical model of heat exchange and graphical results obtained from simulation carried out using the CFD program. During modelling it took into account two models: two-dimensional and three-dimensional for evaluation of the air flow and cooling rate of the battery modules. It was assumed four modules in one row of the cradle with total electric capacity above 4 kWh. The paper shows geometry of the whole battery unit with ventilation passages in 3D configuration. The aim of the work was determination of thermal parameters of the battery modules cooled by the air flow in the close chamber. The proposed cooling model of the cradle with air flow caused by fans in the pipe inlet shows that it is not possible to decrease temperature in the same way of each battery modules.
Źródło:
Journal of KONES; 2013, 20, 2; 277-284
1231-4005
2354-0133
Pojawia się w:
Journal of KONES
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Hybrid Modelling of Machine Tool with Integrated Cooling System
Autorzy:
Bukowski, A.
Grochowski, M.
Jedrzejewski, J.
Powiązania:
https://bibliotekanauki.pl/articles/971101.pdf
Data publikacji:
2008
Wydawca:
Wrocławska Rada Federacji Stowarzyszeń Naukowo-Technicznych
Tematy:
mechatronic model
machine tool
cooling system
Opis:
In this paper, a method of hybrid modelling of machine's mechanic structure together with mechatronic cooling system of its body is presented. In this method, a FEM model, traditionally used for thermal analyses of machine's thermal behaviour, has been integrated with mechatronic model of cooling system, implemented in MATLAB. In such way, a hybrid model has been created, allowing to simulate the control of machine body cooling process. Applied simulation of cooling the region of body, adjacent to the guide, illustrates the possibility of controlling the temperature in chosen points of the machine tool, in transient state, which would ensure minimal body deformations, small enough not to require compensation, which is generally hard and of limited precision. Thermal model of machine tool has been built with the use of SATO system [1]. In this work, time-domain temperature changes with and without the use of regulation by means of PID regulator have been compared. Results of the simulation show the usefulness of presented hybrid modelling method for the improvement of machine tool thermal behaviour.
Źródło:
Journal of Machine Engineering; 2008, 8, 1; 84-93
1895-7595
2391-8071
Pojawia się w:
Journal of Machine Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Influence of forced cooling of the frictional elemets of the disk brake on the braking efficiency
Ehksperimental'noje issledovane vlijanja prinuditel'nogo okhlazhdenja frikcionnykh elementov diskovogo tormoza na ehffektivnost' tormozhenja
Autorzy:
Osenin, Y.I.
Sosnov, I.
Sergienko, O.
Biloborodova, I.
Powiązania:
https://bibliotekanauki.pl/articles/791872.pdf
Data publikacji:
2011
Wydawca:
Komisja Motoryzacji i Energetyki Rolnictwa
Tematy:
braking efficiency
friction element
disk brake
mechanical braking
friction coefficient
cooling system
liquid-air cooling system
Źródło:
Teka Komisji Motoryzacji i Energetyki Rolnictwa; 2011, 11
1641-7739
Pojawia się w:
Teka Komisji Motoryzacji i Energetyki Rolnictwa
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
Smart Cooling Controlled System Exploiting Photovoltaic Renewable Energy Systems
Autorzy:
Atieh, A.
Al Asfar, J.
Tawalbeh, N.
Shaqour, E.
Alsalhi, I.
Istaiteh, O.
Powiązania:
https://bibliotekanauki.pl/articles/123359.pdf
Data publikacji:
2018
Wydawca:
Polskie Towarzystwo Inżynierii Ekologicznej
Tematy:
smart cooling system
solar system
energy management
cost analysis
Opis:
A smart cooling system to control the ambient temperature of a premise in Amman, Jordan, is investigated and implemented. The premise holds 650 people and has 14 air conditioners with the cooling capacity ranging from 3 to 5 ton refrigerant (TR) each. The control of the cooling system includes implementing different electronics circuits that are used to sense the ambient temperature and humidity, count the number of people in the premise and then turn ON/OFF certain air conditioner(s). The data collected by different electronic circuits are fed wirelessly to a microcontroller, which decides which air conditioner will be turned ON/OFF, its location and its desired set cooling temperature. The cooling system is integrated with an on-grid solar photovoltaic energy system to minimize the operational cost of the overall cooling system.
Źródło:
Journal of Ecological Engineering; 2018, 19, 2; 39-44
2299-8993
Pojawia się w:
Journal of Ecological Engineering
Dostawca treści:
Biblioteka Nauki
Artykuł
Tytuł:
The impact of selected cooling systems on the urban natural environment
Autorzy:
Matuszak, Zbigniew
Złoczowska, Ewelina
Żabińska, Iwona
Powiązania:
https://bibliotekanauki.pl/articles/27313467.pdf
Data publikacji:
2022
Wydawca:
Politechnika Śląska. Wydawnictwo Politechniki Śląskiej
Tematy:
cooling system
refrigeration
urban environment
system chłodzenia
chłodzenie
środowisko miejskie
Opis:
Purpose: The aim of the paper is to indicate the possibility of using refrigerants which do not have a harmful effect on the destruction of the Earth's ozone layer and the urban environment. Design/methodology/approach: The environmental impact of refrigerants was characterized. Selected refrigerants and their place of application are described. The impact of selected refrigerants on the urban environment is presented. Findings: An attempt has been made to identify the absolute environmental impact of selected stationary refrigeration systems in operation in cities, i.e. home refrigerators, individual air conditioners, heat pumps, air conditioning systems of large-format stores - shopping centers, or cold stores. Both the direct impact related to the refrigerant used in the system and the indirect one related to the energy consumption to drive the device have been considered. Practical implications: Use of new refrigerants that do not damage the Earth's ozone layer. Originality/value: The environmental impact of different refrigerants is presented. The paper is addressed to technical services and personnel responsible for the design and operation of refrigeration and air-conditioning equipment.
Źródło:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska; 2022, 161; 111--120
1641-3466
Pojawia się w:
Zeszyty Naukowe. Organizacja i Zarządzanie / Politechnika Śląska
Dostawca treści:
Biblioteka Nauki
Artykuł

Ta witryna wykorzystuje pliki cookies do przechowywania informacji na Twoim komputerze. Pliki cookies stosujemy w celu świadczenia usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że będą one zamieszczane w Twoim komputerze. W każdym momencie możesz dokonać zmiany ustawień dotyczących cookies